Bibliografie tematiche / Development of thin films

Indice

Articoli di riviste
Tesi
Libri
Capitoli di libri
Atti di convegni
Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Development of thin films"

Autore: Grafiati

Pubblicato: 19 aprile 2025

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Development of thin films".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Development of thin films"

Lee, Dong Nyung. "Texture Development in Thin Films". Materials Science Forum 408-412 (agosto 2002): 75–94. http://dx.doi.org/10.4028/www.scientific.net/msf.408-412.75.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Knorr, D. B., D. P. Tracy e T. M. Lu. "Texture Development in Thin Metallic Films". Textures and Microstructures 14 (1991): 543–54. http://dx.doi.org/10.1155/tsm.14-18.543.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Gorman, Brian P., e Harlan U. Anderson. "Microstructure Development in Unsupported Thin Films". Journal of the American Ceramic Society 85, n. 4 (20 dicembre 2004): 981–85. http://dx.doi.org/10.1111/j.1151-2916.2002.tb00203.x.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Thompson, Carl V., e Roland Carel. "Texture development in polycrystalline thin films". Materials Science and Engineering: B 32, n. 3 (luglio 1995): 211–19. http://dx.doi.org/10.1016/0921-5107(95)03011-5.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Braz Fernandes, Francisco Manuel, Rui M. S. Martins, Norbert Schell, Karimbi Koosappa Mahesh e Rui Jorge C. Silva. "Texture Development in Ni-Ti Thin Films". Advances in Science and Technology 59 (settembre 2008): 69–76. http://dx.doi.org/10.4028/www.scientific.net/ast.59.69.

Testo completo

Abstract (sommario):

The Shape Memory Effect on Ni-Ti thin films is strongly dependent on several factors: (i) chemical composition of the matrix, (ii) presence of precipitates and (iii) preferential orientation. Ni-Ti alloys derive their unique nonlinear and anisotropic mechanical behavior from stress-induced martensitic transformations, where the resulting strains are affected by crystallographic orientation. The influence of the texture on the transformation characteristics of Ni-Ti thin films is discussed on the basis of models and experimental results of the literature. A brief review of the texture build-up on thin films obtained by different fabrication techniques (sputtering, melt spinning, diffusion treatment of ultra-fine laminates, …) is presented. Details about in situ techniques allowing the identification of the preferential orientation during the fabrication process are presented. The processing parameters that more strongly influence the preferential orientation of the Ni-Ti thin films are identified. The mechanisms for the different microstructures are summarized and a special emphasis is put on the type of preferential orientation and its evolution along the processing time.

Gli stili APA, Harvard, Vancouver, ISO e altri

HIRONAKA, Seiichiro. "Development of New Carbon Thin Films. Preparation and Application of Fullerene Thin Films." Journal of the Surface Finishing Society of Japan 47, n. 5 (1996): 419–21. http://dx.doi.org/10.4139/sfj.47.419.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Laibowitz, Robert B. "High Tc Superconducting Thin Films". MRS Bulletin 14, n. 1 (gennaio 1989): 58–62. http://dx.doi.org/10.1557/s0883769400053926.

Testo completo

Abstract (sommario):

While high Tc superconductivity was first discovered in bulk material, it was apparent that thin films of these materials, particularly the compound YBa2Cu3O7-δ, would be of great interest to both science and technology. In this sense the development of these materials parallels a similar history in the low Tc materials. Initially, most of the low Tc materials of interest were single element metals such as Nb, Pb and Al in bulk form. Later work, mostly in magnets, led to the development of compounds or alloys of such metals as Nb-Sn, Nb-Ti, and many others. However, many physical and technological investigations required thin films with thicknesses in the range of 0.1-10μm. Microwave, infrared, and critical current studies are examples of some of the scientific uses of thin films. A few examples of the applications would include josephson junction-based digital computer circuits, SQUID (Superconducting Quantum Interference Devices), transmission lines, and interconnects and rf mixers. These studies are also of great interest in the high Tc materials. It is readily apparent that scientific and technological developments in superconductivity are closely interwoven.The high level of interest in thin films can be appreciated by observing that it was barely a few months after the announcement of superconductivity above 77 K that the first films of these complex, multi-element materials, superconducting at about 86 K were announced. These early efforts at thin film fabrication were generally accomplished using multi-element deposition techniques but subsequent development has seen many varieties of film fabrication techniques used quite successfully to fabricate high-quality films.

Gli stili APA, Harvard, Vancouver, ISO e altri

Headley, T. J., B. A. Tuttle, J. A. Voigt e J. R. Michael. "Microstructural development in solution-derived PZT thin films". Proceedings, annual meeting, Electron Microscopy Society of America 52 (1994): 578–79. http://dx.doi.org/10.1017/s0424820100170621.

Testo completo

Abstract (sommario):

Lead zirconate titanate (PZT) thin films are of technological interest for a variety of electronic and optical applications such as nonvolatile memories, decoupling capacitors, infrared detectors, and optical storage media. Fabrication of PZT films by solution deposition techniques is attractive because of uniform, stoichiometric control at the molecular level, ease of processing, and both low capital investment and total cost. Control of phase evolution, microstructure, crystallite size and orientation, and ferroelectric domain assemblage during processing is essential to optimize electrical and/or optical properties of the films. Factors which play a major role in controlling these parameters are details of the solution chemistry and mixing, thermal processing, Pb stoichiometry, Zr/Ti ratio, and substrate characteristics. Electron microscopy techniques have been used extensively to correlate microstructural features with film processing parameters as will be emphasized in this presentation.As annealing temperature is increased, phase evolution in PZT thin films typically proceeds from amorphous to pyrochlore to the ferroelectric perovskite phase. Fine-grained pyrochlore crystallizes from the amorphous film at low annealing temperatures and also precedes crystallization of the perovskite phase at higher temperatures. There is evidence that the Zr/Ti stoichiometry influences the microstructure of the amorphous-to-pyrochlore transformation.

Gli stili APA, Harvard, Vancouver, ISO e altri

Mele, Paolo, Shiv J. Singh, Shrikant Saini, Alok K. Jha e Malik I. Adam. "Nanostructured Oxide Thin Films for Sustainable Development". Procedia Engineering 171 (2017): 201–6. http://dx.doi.org/10.1016/j.proeng.2017.01.327.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Yamashita, Akira, Hiroshi Ohji, Tatsuya Fukami e Kazuhiko Tsutsumi. "Development of High TCR Platinum Thin Films". IEEJ Transactions on Sensors and Micromachines 124, n. 7 (2004): 242–47. http://dx.doi.org/10.1541/ieejsmas.124.242.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Development of thin films"

Tannenbaum, Jared Michael. "The development of a portable instrumented indentation system". Morgantown, W. Va. : [West Virginia University Libraries], 2008. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5931.

Testo completo

Abstract (sommario):

Thesis (M.S.)--West Virginia University, 2008.
Title from document title page. Document formatted into pages; contains xiv, 127 p. : ill. Includes abstract. Includes bibliographical references (p. 61-62).

Gli stili APA, Harvard, Vancouver, ISO e altri

Figueiredo, Vitor Manuel Loureiro. "Development of copper and nickel based oxide thin-films: design and fabrication of thin-film transistors". Doctoral thesis, Faculdade de Ciências e Tecnologia, 2012. http://hdl.handle.net/10362/9296.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Carvalho, Tânia Isabel da Silva. "Development of ion jelly thin films for electrochemical devices". Doctoral thesis, Faculdade de Ciências e Tecnologia, 2013. http://hdl.handle.net/10362/10874.

Testo completo

Abstract (sommario):

Dissertação para obtenção do Grau de Doutor em Química Sustentável
Ionic liquids (ILs) are promising materials which have been used in a wide range of applications. However, their major limitation is their physical state. In order to address this challenge, a self-supported IL-based material was developed by combining gelatine with an IL, originating a quasi-solid material named Ion Jelly (IJ). This is a light flexible material, dimensionally stable, with promising properties to develop safe and highly conductive electrolytes. This thesis is focused on the characterization of IJ films based on different ILs. The conductive mechanisms of IJ materials were studied using dielectric relaxation spectroscopy (DRS) in the frequency range 10-1−106 Hz. The study was complemented by differential scanning calorimetry (DSC) and pulsed field gradient nuclear magnetic resonance (PFG NMR) spectroscopy. A glass transition was detected by DSC for all materials allowing to classify them as glass formers. From dielectric measurements, transport properties such as mobility and diffusion coefficients were extracted. Moreover, it was found that the diffusion coefficients and mobility are similar for the IL and IJ, especially for the IL EMIMDCA. Since for BMIMDCA, those properties significantly change upon hydration, the influence of water content [0.4 - 30% (w/w)] was also studied for the ILs. In particular for BMPyrDCA with 30% water, it was analyzed the reorientational polarization by the complex permittivity and electric modulus, from which three different processes were identified: a secondary relaxation with Arrhenian temperature dependence, the process that is believed to be behind the dynamic glass transition and the mobility of charge carriers. An application of the IJs was successfully explored with a chemoresistive gas sensor made up by different IJs as active layer, which is an electronic nose formed by an array of such sensors. The performance of this e-nose revealed its ability to correctly detect eight common volatile solvents.

Gli stili APA, Harvard, Vancouver, ISO e altri

Alfadhili, Fadhil K. "Development of Back Contacts for CdTe Thin Films Solar Cells". University of Toledo / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1588962981116943.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Fazio, Maria Antonietta <1989&gt. "Development and analyses of innovative thin films for photovoltaic applications". Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2019. http://amsdottorato.unibo.it/9028/1/PhDThesisMAFazio.pdf.

Testo completo

Abstract (sommario):

In solar cell current research, innovative solutions and materials are continuously requested for efficiency improvements. Si-based technology rules over 95% of the market, with silicon heterojunction (SHJ) solar cell reaching 26.7% record efficiency. Nonetheless, hydrogenated amorphous silicon (a-Si:H) layers employed in the structure still have challenges, resolvable with oxygen/nitrogen inclusion. In parallel, new technologies based on different materials still lack in the market due to stability issues or low efficiencies. However, a preliminary study of their properties creates a deeper knowledge exploitable in photovoltaic application. In this perspective, we investigated both innovative Si-based materials (nanocrystalline and amorphous silicon oxy-nitride and oxide thin films, nc-SiOxNy, a-SiOxNy and a-SiOx, respectively) and innovative materials (perovskite lanthanum-vanadium oxide LaVO3 thin films, indium gallium nitride InxGa1-xN and aluminium indium gallium nitride AlxInyGa1-x-yN layers) for solar cell concepts. Different deposition conditions have been employed to extract their influence on compositional, optical, and electrical properties. The study on nc-SiOxNy layers by conductive atomic force microscopy (c-AFM) and surface photovoltage (SPV) has allowed to clarify O, N, and B content, and annealing treatment role on microscopic transport properties. On a-SiOx and a-SiOxNy layers, by spectral ellipsometry, Fourier transform infrared spectroscopy, photoconductance decay and SPV, we can conclude that moderate insertions of O/N in a-Si:H lead to a decrease of optical parasitic absorption, preserving the passivation quality of the layers. The measurements by AFM and Kelvin probe force microscopy on LaVO3 have clearly shown that it is a poor charge-transport medium, thus not suitable for photovoltaic applications. The analysis on InGaN and AlGaInN by SPV measurements has shown how low In content, Si doping and no misfit dislocations in InGaN/GaN structure cause less recombination processes at the interface, whereas, the strain relaxation (tensile and compressive) with the formation of pinholes produces better interfaces in the AlGaInN/GaN samples.

Gli stili APA, Harvard, Vancouver, ISO e altri

Law, Tak Wai. "Development of low temperature processable ceramic thin film embedded capacitors /". View Abstract or Full-Text, 2003. http://library.ust.hk/cgi/db/thesis.pl?MECH%202003%20LAW.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Morales, Hector Roberto. "Development and integration of thin film zinc oxide integral resistors in SOP". Thesis, Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/19908.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

RincÃ³n-Rosenbaum, Charlene. "Development of poly(3-octylthiophene) thin films for regulating osteoblast growth". Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/26493.

Testo completo

Abstract (sommario):

Thesis (Ph.D)--Chemical Engineering, Georgia Institute of Technology, 2009.
Committee Chair: J. Carson Meredith; Committee Member: Hang Lu; Committee Member: Joseph Schork; Committee Member: William Koros; Committee Member: Yadong Wang. Part of the SMARTech Electronic Thesis and Dissertation Collection.

Gli stili APA, Harvard, Vancouver, ISO e altri

Rincón-Rosenbaum, Charlene. "Development of poly(3-octylthiophene) thin films for regulating osteoblast growth". Diss., Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/26493.

Testo completo

Abstract (sommario):

The overall objective of this work was to assess the suitability of poly(3-octylthiophene) (P3OT) to sustain MC3T3-E1 osteoblast attachment and growth. The central hypothesis was that specific P3OT film properties (i.e., thickness, film preparation conditions, and level of doping) are able to regulate osteoblast functions (i.e., attachment and proliferation). Discrete and combinatorial techniques were utilized to prepare and characterize thin films of P3OT, a semiconductor in its undoped state, and to study its interaction with MC3T3-E1 osteoblasts. In this work we demonstrate that P3OT is a suitable surface to sustain MC3T3-E1 attachment and proliferation with no observed cytotoxicity. We show that P3OT has an effect on MC3T3-E1 attachment and proliferation as area, circularity, and proliferation ratio are significantly different for P3OT compared to control surfaces. We also demonstrate that P3OT doping and film preparation conditions have an effect on osteoblast attachment and proliferation but that thickness over a low and high range does not affect osteoblast functions. This work is significant because it contributes to the growing area of conducting polymers in biomedical applications and establishes P3OT as a potential cell substrate that sustains MC3T3-E1 attachment and promotes high levels of cell proliferation.

Gli stili APA, Harvard, Vancouver, ISO e altri

Wilde, Stuart. "Development of superconducting thin films for use in SRF cavity applications". Thesis, Loughborough University, 2017. https://dspace.lboro.ac.uk/2134/34659.

Testo completo

Abstract (sommario):

Superconducting thin films are a possible alternative to bulk niobium for superconducting radio frequency cavity applications. Thin film cavities have produced larger Q0 than bulk niobium at low accelerating voltages [1], are less susceptible to external magnetic fields and therefore require less magnetic shielding than bulk niobium cavities [2] and can benefit from substrates which conduct heat more effectively than bulk niobium [3]. The major drawback for current thin film cavity technology is the large Q slope which is observed above accelerating gradients of 6 7 MV/m. The mechanism for the Q slope is not yet fully understood. Theories have been suggested but are not accepted by everyone within the scientific community [2, 4, 5, 6, 7]. It is assumed that a better understanding of the physical properties of superconducting films is required before the origins of the sharp Q slope can be elucidated. This study has been conducted to better understand the physical properties of superconducting thin films deposited by the magnetron sputtering process. In particular, superconducting niobium films have been deposited by high power impulse magnetron sputtering (HiPIMS) and tested by a wide range of analytical techniques as a function of the substrate temperature and applied bias during deposition. Analytical techniques which have been used include x-ray diffraction crystallography, Rutherford backscattering spectroscopy, scanning electron microscopy, residual resistance ratio, DC magnetometry and RF surface resistance measurements. Results showed that the application of an applied bias during deposition resulted in increased energy of bombarding ions and enhanced rates of surface diffusion and defect annihilation within the microstructure of a growing niobium film. However, large numbers of random complex defects formed once the energy of bombarding ions becomes too large. The systematic approach that was described to investigate the changing morphological and DC superconducting properties of deposited films, as a function of the applied bias, allowed the identification of which process conditions produce the fewest random complex defects. The same systematic investigations could be applied to any HiPIMS deposition facility to provide similar results. An important observation during the study is that the initial substrate conditions have a large influence on the properties of a deposited niobium film. Niobium films deposited onto polycrystalline copper substrate that was pre-annealed at 700 ˚C prior to deposition displayed more stable magnetic flux pinning, larger RRR and an enhanced resistance to the onset of flux penetration, than was observed for films deposited with a wide range of process conditions onto as received copper substrate. Superconductors other than niobium have been successfully deposited by HiPIMS and tested. Niobium titanium nitride thin films displayed a superconducting transition temperature up to 16.7 K, with a normal state resistivity as small as 45±7 μΩcm. The findings suggest that similar niobium titanium nitride thin films could produce smaller RF surface resistance than bulk niobium cavities at 4.2 K.

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Libri sul tema "Development of thin films"

H, Francombe Maurice, e Vossen J. L, a cura di. Thin films: Advances in research and development. San Diego: Academic Press, 1995.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

K, Vedam, a cura di. Physics of thin films: Advances in research and development. London: Academic Press, 1994.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

H, Francombe Maurice, e Vossen John L, a cura di. Physics of thin films: Advances in research and development. Boston: Academic Press, 1993.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

H, Francombe Maurice, e Vossen John L, a cura di. Physics of thin films: Advances in research and development. Boston, Mass: Academic Press Inc, 1991.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Linke, Felix. Development of ellipsometric microscopy as a quantitative high-resolution technique for the investigation of thin films at glass-water and silicon-air interfaces. Jülich: Forschungszentrum Jülich, 2004.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

United States. National Aeronautics and Space Administration., a cura di. Development of thin film thermocouples on ceramic materials for advanced propulsion system applications. [Washington, DC]: National Aeronautics and Space Administration, 1993.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Japan) Foton Fakutorī Kenkyūkai (2011 October 14-15 Tsukuba-shi. Jisei hakumaku, tasōmaku o kiwameru kyarakutarizēshon kara shinki zairyō no sōsei e: PF Kenkyūkai = Exploring magnetic thin films and multilayers : from the characterization to the development of novel materials. Tsukuba-shi, Ibaraki-ken, Japan: High Energy Accelerator Research Organization, 2011.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Centre, Bhabha Atomic Research, a cura di. Development of a state-of-the-art R.F. sputtering coating system for the fabrication of multilayer x-ray mirrors. Mumbai: Bhabha Atomic Research Centre, 2000.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Hopkins, Vern. Development of solid film lubricants for use in space environments. [Washington, DC]: NASA Center for AeroSpace Information, 2000.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Capitoli di libri sul tema "Development of thin films"

Nagata, Takahiro, e Toyohiro Chikyow. "Combinatorial Synthesis Applied to the Development of Thin Film Materials for Nanoelectronics". In Functional Thin Films Technology, 1–19. New York: CRC Press, 2021. http://dx.doi.org/10.1201/9781003088080-1.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Mishra, B., J. Zhou e F. Kustas. "Development of Cermet Thin Films Coatings". In Surface Engineering, 249–60. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118788325.ch25.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Braz Fernandes, Francisco Manuel, Rui M. S. Martins, Norbert Schell, Karimbi K. Mahesh e Rui Jorge C. Silva. "Texture Development in Ni-Ti Thin Films". In Advances in Science and Technology, 69–76. Stafa: Trans Tech Publications Ltd., 2008. http://dx.doi.org/10.4028/3-908158-16-8.69.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Barna, P. B., e Y. Pauleau. "Conclusions of the Nato-ARW and Directions for Future Research and Development on Protective Coatings". In Protective Coatings and Thin Films, 659–60. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-011-5644-8_51.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Coveney, Sam. "Development of Theory for Polymer-Blend Thin Films". In Fundamentals of Phase Separation in Polymer Blend Thin Films, 35–53. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-19399-1_3.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

He, Wenjuan, Suyun Wang, Beiqing Hang, Xianfu Wei e Lijuan Liang. "Development of Solution-Processed Organic Semiconductor Thin Films". In Lecture Notes in Electrical Engineering, 471–79. Singapore: Springer Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1673-1_70.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Miryala, Santosh. "Design and Development of High-T c Superconducting Train Model Using Bulk Nanocomposite GdBa2Cu3O y". In Oxide Thin Films, Multilayers, and Nanocomposites, 97–106. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-14478-8_6.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Delplancke-Ogletree, M. P., e O. R. Monteiro. "Stress Development and Relaxation in Nanostructured Films Deposited by Cathodic Vacuum Arc". In Nanostructured Thin Films and Nanodispersion Strengthened Coatings, 167–74. Dordrecht: Springer Netherlands, 2004. http://dx.doi.org/10.1007/1-4020-2222-0_16.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Romankov, S. E., e B. N. Mukashev. "Microstructural Development of Ti-Al Thin Films During Annealing". In Nanostructures: Synthesis, Functional Properties and Applications, 353–61. Dordrecht: Springer Netherlands, 2003. http://dx.doi.org/10.1007/978-94-007-1019-1_20.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Wang, Xudong, Long Gu e Chunhua Yao. "Engineering of Nanocellulose Thin Films for Triboelectric Nanogenerator Development". In Emerging Nanotechnologies in Nanocellulose, 335–66. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-14043-3_11.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Development of thin films"

Miaoulis, Ioannis N., Haruna Tada, Seth Mann e Peter Y. Wong. "Selective Multilayer Thin-Film Development in Insects". In ASME 1997 International Mechanical Engineering Congress and Exposition, 33–40. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-1309.

Testo completo

Abstract (sommario):

Abstract Multilayer structures of biological thin films play numerous roles in insects, plants, lizards, and birds. Due to microscale radiative effects, small changes in the film thicknesses result in large changes in reflected sunlight and solar absorption. Through selective variations of the thin-film thicknesses and structures, nature has used multilayer structures for a variety of purposes. In butterflies, the thin films result in a colorful iridescence that is used for signaling, courting, camouflage, and display. Moreover, these thin films appear to be multifunctional; the light not reflected is absorbed for thermoregulation purposes. Variations of thin films in butterfly scales of different species results in different spectral and total reflectivity characteristics. An experimental apparatus was used to measure the spectral reflectivity from single scales, ∼100 μm long. Images of the illuminated scales reveal the effect of the microstructure on the optical properties.

Gli stili APA, Harvard, Vancouver, ISO e altri

Martínez Valdiviezo, Jeffry H., e Gustavo A. Torchia. "Design and development of integrated sensors under the silicon on insulator (SOI) platform for applications in the near/mid-infrared (NIR/MIR) band." In Nanoengineering: Fabrication, Properties, Optics, Thin Films, and Devices XXI, a cura di Wounjhang Park, André-Jean Attias e Balaji Panchapakesan, 29. SPIE, 2024. http://dx.doi.org/10.1117/12.3028216.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Boulmelh, Salah, Nadjah Sobti, Bessem Kaghouche e Lynda Saci. "Development of Sn-ZnO Thin Films for Energy Storage Uses". In 2024 3rd International Conference on Advanced Electrical Engineering (ICAEE), 1–5. IEEE, 2024. https://doi.org/10.1109/icaee61760.2024.10783162.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Huang, Chu-Yu, e Ming-Shiuan Tsai. "Development of batch producible hot embossing 3D nanostructured surface-enhanced Raman scattering chip technology". In Nanostructured Thin Films X, a cura di Tom G. Mackay, Akhlesh Lakhtakia e Yi-Jun Jen. SPIE, 2017. http://dx.doi.org/10.1117/12.2270472.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Zhang, Jinlong, Xiaochuan Ji, Hongfei Jiao, Xinbin Cheng e Zhanshan Wang. "Recent development of dispersive mirror". In Advances in Optical Thin Films VIII, a cura di Michel Lequime e Detlev Ristau. SPIE, 2024. http://dx.doi.org/10.1117/12.3022832.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Verrone, Richard-Nicolas, Andrea Campos, Martiane Cabié, Carine Perrin-Pellegrino, Julien Lumeau, Jean-Yves Natoli e Konstantinos Iliopoulos. "Giant saturable absorption in thin Sb2Te3 layers: development and characterization". In Advances in Optical Thin Films VII, a cura di Michel Lequime e Detlev Ristau. SPIE, 2021. http://dx.doi.org/10.1117/12.2597345.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Vergöhl, Michael, Chris Britze, Bernd Schäfer, Klaus Mann, Volker Kirschner, Stefan Bruns e Jennifer Ahrens. "Development of a broadband dielectric beam splitter with reduced spectral wavefront error". In Advances in Optical Thin Films VI, a cura di Michel Lequime, H. Angus Macleod e Detlev Ristau. SPIE, 2018. http://dx.doi.org/10.1117/12.2313668.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Nagarur, Aruna R., S. Gopalan e Carl W. Dirk. "Development Of Plastic Optical Fiber Devices and Multiple-Core Plastic Optical Fibers". In Organic Thin Films for Photonic Applications. Washington, D.C.: Optica Publishing Group, 1995. http://dx.doi.org/10.1364/otfa.1995.mb.4.

Testo completo

Abstract (sommario):

A vast amount of research has been done on optical fibers. Most of the work has been done on Glass optical fibers (GOFs). Much less has been done on Plastic optical fibers (POFs), and very little with regards to applications of nonlinear optics.1 Plastic optical fibers are currently under intense investigation and are used for Local Area Networks (LAN), vehicular systems2 and optical sensor applications. Though they have much greater losses than Glass optical fibers they display advantages with regard to easy fabrication, flexibility, porosity and permeability (sensors), optical modification by organic dyes and cost.

Gli stili APA, Harvard, Vancouver, ISO e altri

Aubard, Océane, Marine Chorel, Eric G. Lavastre, Bruno Bousquet e Corinne Marcel. "Development of dielectric mirrors by magnetron sputtering for high power laser facilities." In Advances in Optical Thin Films VIII, a cura di Michel Lequime e Detlev Ristau. SPIE, 2024. http://dx.doi.org/10.1117/12.3017557.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Gärtner, Anne, Tina Seifert, Friedrich Rickelt, Ulrike Schulz e Andreas Tünnermann. "Xanthine: a promising organic material for the development of nanostructured anti-reflective layers". In Advances in Optical Thin Films VII, a cura di Michel Lequime e Detlev Ristau. SPIE, 2021. http://dx.doi.org/10.1117/12.2597135.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Development of thin films"

Shmulovich, J. Thin Film Phosphor Development. Fort Belvoir, VA: Defense Technical Information Center, gennaio 1989. http://dx.doi.org/10.21236/ada272921.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Belzer, Barbara J., e David L. Blackburn. Thin film reference materials development. Gaithersburg, MD: National Institute of Standards and Technology, 1998. http://dx.doi.org/10.6028/nist.sp.400-100.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Cherry, Hilary B. B. The development of potassium tantalate niobate thin films for satellite-based pyroelectric detectors. Office of Scientific and Technical Information (OSTI), maggio 1997. http://dx.doi.org/10.2172/505713.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Phisalaphong, Muenduen, e Neeracha Sanchavanakit. Development of bacterial cellulose for temporary skin substitute. Chulalongkorn University, 2006. https://doi.org/10.58837/chula.res.2006.74.

Testo completo

Abstract (sommario):

Thin films of bacterial cellulose (BC) from nata de coco culture system were developed, characterized and investigated for the growth of human keratinocytes and fobroblasts. The average pore diameter and total surface area of the dried BC films estimated by BET were 224 [aungstrom] degree Celsius A and 12.62 m[superscript 2] /g, respectively. With the film thickness 0f 0.12 mm, the average tensile strength and break strain of the dried films were 5.21 MPa and 3.75 % while those of the wet films were 1.56 MPa and 8.00 %, respectively. The water absorption capacity of air-dried film was 5.09 g water/g dried films. For the uses in the therapy of skin wounds, the potential biological mechanism of action of BC film was evaluated by using human keratinocytes and fibroblasts. Our results were the first direct demonstration that BC film supported the growth, spreading and migration of human keratinocytes, but not those of human fibroblasts. Expressions of E-cadherin and alpha-3 chain of laminin confirmed the phenotype of human keratinocyte on BC film.

Gli stili APA, Harvard, Vancouver, ISO e altri

Hong, Y. K., Y. Qiang, D. E. Aston, C. A. Berven, J. L. Young e G. W. Donohoe. Development of High Resistive and High Magnetization Soft Thin Film and Fabrication of Thin Film Inductors. Fort Belvoir, VA: Defense Technical Information Center, novembre 2004. http://dx.doi.org/10.21236/ada433358.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Lesoine, Michael D. Subdiffraction instrumentation development and application to the elucidation of biological systems, thin films, and organic photovoltaic devices. Office of Scientific and Technical Information (OSTI), dicembre 2014. http://dx.doi.org/10.2172/1226563.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Badzian, Andrzej, e Gennady Gildenblat. Development of Thin Film Diamond Based Integrated Circuit Technology. Fort Belvoir, VA: Defense Technical Information Center, dicembre 1994. http://dx.doi.org/10.21236/ada294519.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Bates, J. B., e T. Sein. Development of Thin-Film Battery Powered Transdermal Medical Devices. Office of Scientific and Technical Information (OSTI), luglio 1999. http://dx.doi.org/10.2172/10434.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Gaughen, C. D. Guidance Development: Thin Film and Epoxy Mortar Flooring Systems. Fort Belvoir, VA: Defense Technical Information Center, agosto 2000. http://dx.doi.org/10.21236/ada383205.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Wunsch, Thomas. Optimization and development of thin-film thermal batteries (TFTB). Office of Scientific and Technical Information (OSTI), luglio 2013. http://dx.doi.org/10.2172/1087308.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!