Bibliografie tematiche / Drying

Indice

  1. Articoli di riviste
  2. Tesi
  3. Libri
  4. Capitoli di libri
  5. Atti di convegni
  6. Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Drying"

Autore: Grafiati
Pubblicato: 4 giugno 2021
Ultima modifica: 25 luglio 2025

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Drying".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Drying"

1

Edelmann, Richard E., and Margaret E. Hogan. "A comparative study of fixation and dehydration techniques for the preservation of conidial structures in fungi for SEM." Proceedings, annual meeting, Electron Microscopy Society of America 45 (August 1987): 982–83. http://dx.doi.org/10.1017/s042482010012919x.

Testo completo
Abstract (sommario):
Conventional preparative techniques for biological specimens For scanning electron microscopy (SEM), when used for Fungal specimens, involve immersion in fixation and dehydration solutions. This often results in physical damage to delicate reproductive structures. Attempts at eliminating this damage using OsO4 vapors as a fixative, followed by air drying, may also produce less than optimal results.In order to devise an improved method for preparing fungal specimens, several genera were selected for their very delicate aerial conidial structures, and were prepared using six different procedures
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Do, Thuy Khanh Linh, Thanh Tuan Chau, Tran Khanh Linh Vu, and Tan Dung Nguyen. "Study on Calculating, Designing and Manufacturing the Smart Infrared Drying System." Journal of Technical Education Science, no. 73 (December 28, 2022): 64–73. http://dx.doi.org/10.54644/jte.73.2022.1295.

Testo completo
Abstract (sommario):
The infrared drying technology has been known as the energy saving technology. The infrared dried products keep their quality better than those dried by other normal methods. This research will present the results of calculating, designing, and manufactured the infrared drying system with the capacity of 12 kilograms materials per batch. The drying process is automatically controlled and measured by the computer program. After successfully manufactured, the drying system was used to dry the pineapple products with a thickness of 3 to 4 mm and followed by the drying modes: 69 °C of the drying t
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Mabasso, Geraldo A., Valdiney C. Siqueira, Wellytton D. Quequeto, Rodrigo A. Jordan, Elton A. S. Martins, and Vanderleia Schoeninger. "Energy efficiency and physical integrity of maize grains subjected to continuous and intermittent drying." Revista Brasileira de Engenharia Agrícola e Ambiental 25, no. 10 (2021): 710–16. http://dx.doi.org/10.1590/1807-1929/agriambi.v25n10p710-716.

Testo completo
Abstract (sommario):
ABSTRACT Grain drying is a common process, due to its need for the maintenance of quality, but it is the activity with the highest energy demand among the postharvest stages. Thus, this study aimed to evaluate the effect of different tempering times on the energy efficiency of drying process and maintenance of cell membrane integrity of maize grains harvested with moisture content at 0.34 ± 0.01 d.b. The grains were dried in an experimental fixed-bed dryer with control of temperature and air flow conditions. The experiment was conducted in a completely randomized design with five tempering tim
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Tavita, Gusti Eva, Mega Sari Juane Sofiana, Asri Mulya Ashari, Rita Kurnia Apindiati, Lucky Hartanti, and Warsidah Warsidah. "Characterization and Antioxidant Activity of Herbal Tea from Gambir Leaves (Uncaria gambir) with Different Drying Processes." Sainstek : Jurnal Sains dan Teknologi 15, no. 2 (2023): 69. http://dx.doi.org/10.31958/js.v15i2.7719.

Testo completo
Abstract (sommario):
Recently, natural antioxidants have been explored to reduce the side effects of synthetic antioxidants. Plants from the Rubiaceae family have strong antioxidants and are widely used in food and cosmetic preparations. his study aims to determine gambir leaf herbal tea's physical-chemical characterization and antioxidant activity (Uncaria gambir) in different drying processes. The processing of drying is drying in direct sunlight and drying with an oven at 60oC for 7 hours. The physical-chemical characterizations are water and ash content, pH, and organoleptic of the herbal tea—the antioxidant a
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Dung, Nguyen Thi Thuy, and Nguyen Van Thuan. "Influence of Drying Temperature on Drying Kinetics and Appearance of Avocado Slices in Heat Pump Drying Process." International Journal of Engineering and Technology 15, no. 3 (2023): 89–93. http://dx.doi.org/10.7763/ijet.2023.v15.1226.

Testo completo
Abstract (sommario):
The avocado is a nutritious fruit that originated from tropical countries such as Central and Southern America, and Southeast Asia. From the commercial point of view, it is an important fruit with a total world production is around eight million tons in 2020. Fresh avocados can be consumed directly or stored before advanced processing. The drying technique can be applied as an efficient post-harvesting technique to prolong the storage time of avocados. In this paper, heat pump drying experiments were performed to evaluate the influence of drying conditions on the drying time, the moisture diff
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Чернышев, Aleksandr Chernyshev, Ефимова, and Tatyana Efimova. "Physical and mechanical properties and drying modes of Quercus petraea without artificial humidification in convective drying chambers of periodic actionPhysical and mechanical properties and drying modes of Quercus petraea without artificial humidification in convective drying chambers of periodic action." Forestry Engineering Journal 4, no. 1 (2014): 146–50. http://dx.doi.org/10.12737/3359.

Testo completo
Abstract (sommario):
The features of the process and drying modes without artificial humidification of uncut Quercus petraea lumber in convective drying chambers without artificial humidification for furniture and joinery production of premium class is considered. The data of physical and mechanical properties of Quercus petraea, such as density, the number of annual rings and the percentage of late wood are given. The drying process of Quercus petraea was mathematically modeled previously, values ​​of transient humidity and other key operating parameters were obtained, and then practical industrial dryings in one
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Darniati, Iis, Yuwana Yuwana, and Syafnil Syafnil. "QUALITY PROFILE OF DRIED FISH PRODUCED USING YTP-UNIB-2013 WITH VARIED DRYING TEMPERATURES." Jurnal Agroindustri 5, no. 1 (2015): 12–19. http://dx.doi.org/10.31186/j.agroind.5.1.12-19.

Testo completo
Abstract (sommario):
Objectives of this research were 1) to determine fish drying time YTP-UNIB 2013 biomass dryer with four different temperatures; 2) to compare the resulted dry fishes to SNI Standards for fish; 3) to find the optimum drying temperature to produce dry fish with better fit to SNI standards.Utilizing “ Kaseh” fish (Opisthopterus tardoore) as experimental sample dryings with temperatures 30-40 oC, 40-50 oC, 50-60 oC and 60-70 oC, in term of drying time, resulted 10 hours, 8 hours, 6.5 hours and 5.5 hours respectively. From the TPC point of view, the dry fishes produced by these temperature ranges c
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Piechnik, E., M. Stebel, M. Palacz, et al. "Simplified computational model of the primary and secondary freeze-drying process of agriculture and marine foods." Journal of Physics: Conference Series 2766, no. 1 (2024): 012037. http://dx.doi.org/10.1088/1742-6596/2766/1/012037.

Testo completo
Abstract (sommario):
Abstract The food freeze-drying is a low-pressure and low-temperature dehydration process during which the following basic steps can be distinguished: (1) freezing of the food product in the chamber, (2) vacuuming of the freezing chamber, (3) ice sublimation from a frozen food product (primary drying), (4) removing the water bound in the food product (secondary drying). This paper discusses a simplified 1-D in-house computational model of the primary and secondary freeze-drying processes, i.e. stages 3 and 4. In particular, it allows for times prognosis of both, primary and secondary freeze-dr
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Tong, Yun. "Research and Application of Energy Saving Technology in Textile Warp Slashing Process." Applied Mechanics and Materials 508 (January 2014): 223–26. http://dx.doi.org/10.4028/www.scientific.net/amm.508.223.

Testo completo
Abstract (sommario):
Discussion on application on energy saving technology in textile warp sizing, high steam pressure is used to cooking sizing glue so as to reduce the steam consumption, high pressure of squezzing roller in sizing box of sizing machine can decrease load of drying, dryng cyclinder is the best choice among various drying ways in term of energy saving.
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Mejzr, J., and B. Hanousek. "Drying of hop." Research in Agricultural Engineering 53, No. 4 (2008): 155–60. http://dx.doi.org/10.17221/1957-rae.

Testo completo
Abstract (sommario):
In the Czech Republic, belt kilns are predominantly used for hop drying. As in the world other types of hop kilns, such as box kilns, are also frequently used, the comparison appears desirable between the efficiency and quality of the technological processes in the individual kiln types. The present work is aimed at determining the hop drying parameters in the belt hop kiln, and their optimisation.
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Tesi sul tema "Drying"

1

PREZIUSO, MARCO. "Preservation of selected sourdough: comparison of freezing, freeze drying, drying and spray drying techniques." Doctoral thesis, Università degli studi del Molise, 2018. http://hdl.handle.net/11695/84477.

Testo completo
Abstract (sommario):
La fermentazione con impasto acido è uno dei metodi più antichi utilizzati nell'industria dei prodotti lievitati da forno per la produzione di pane casereccio e di numerosi dolci tipici della tradizione italiana. L’impiego di “impasto acido” o “pasta madre” (impasto di tipo I) offre, rispetto all’uso del lievito di birra, numerosi vantaggi in termini di qualità sensoriale, nutrizionale e di shelf-life. L’impasto acido di tipo I, infatti, è caratterizzato da un consorzio microbico eterogeneo, rappresentato principalmente da batteri lattici e da lieviti, la cui fermentazione conferisce al prod
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Tham, Thing Chai. "Improving drying efficiency and energy saving for crumb natural rubber drying with combined drying technologies." Thesis, University of Nottingham, 2018. http://eprints.nottingham.ac.uk/52329/.

Testo completo
Abstract (sommario):
Natural rubber (NR) or cis-1, 4-polyisoprene is obtained from the latex that is tapped from a tree known as Hevea Brasiliensis. It can be in the form of preserved latex concentrates or further processed into sheets, crepes, block rubber that associated with its unique characteristics such as great elongation strength, excellent building tack, low rolling resistance, low heat build-up and good low-temperature performance. These are essential characteristics in dynamic working environment and application especially for vehicle tyre and rubber thread. To produce good quality of technically specif
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Hashemi, Aghchehbody Seyed Jalaleddin. "Through drying of machine formed paper and drying nonuniformity." Thesis, McGill University, 1996. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=37702.

Testo completo
Abstract (sommario):
Transport phenomena characteristics were determined for the through air drying of machine-produced printing and heavier papers. The momentum transport is strongly affected by the specifications of machine-formed papers, but of the drying rate characteristics only the critical moisture content varied between the types of paper tested. To determine the impact of individual parameters of commercial papermaking these experiments with machine-formed paper were supplemented by the use of handsheets. The papermaking parameters of beating, wet pressing, formation and pulp blending all strongly affect
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Bosch, Thomas. "Aggressive Freeze-Drying." Diss., Ludwig-Maximilians-Universität München, 2014. http://nbn-resolving.de/urn:nbn:de:bvb:19-177527.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Gil, Arnaud, and Alex Raffier. "Wallpaper drying solutions : Feasibility study of a low temperature drying process." Thesis, University of Gävle, Department of Technology and Built Environment, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-754.

Testo completo
Abstract (sommario):
<p>The wallpaper company Duro Sweden AB, one of the most important Scandinavian</p><p>wallpaper manufacturers, wants to decrease its energy use and costs and make its</p><p>production more environmentally friendly. It implies changes in the key process energy</p><p>use whom consists mainly by drying process using heat production from oil.</p><p>The purpose of this project, studied by the consulting company Sweco Theorells AB,</p><p>is to determine the feasibility of a change in the energy utilisation implemented to the</p><p>most representative process to propose future solutions’ basis on the
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Yang, Xinbo. "SUITABILITY EVALUATION OF EMERGING DRYING TECHNOLOGIES FOR FINE CLEAN COAL DRYING." OpenSIUC, 2015. https://opensiuc.lib.siu.edu/theses/1688.

Testo completo
Abstract (sommario):
The selling price of coal product in the market depends on the heating value or BTU content of coal, which is a function of both ash and moisture content. Typically the ash content of fine coal and coarse coal reporting to the clean coal belt of a coal preparation plant are relatively similar from each other, however, the moisture content of fine coal is much higher, i.e., 2 to 3 times that of the coarse coal. In that case, although the fine coal proportion of the total clean coal tonnage produced from a plant is in the 10 to 15% range, as much as 33% of the total moisture content in the clean
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Secmeler, Ozge. "Comparison Of Microwave Drying And Microwave Mixed-bed Drying Of Red Peppers." Master's thesis, METU, 2003. http://etd.lib.metu.edu.tr/upload/1098979/index.pdf.

Testo completo
Abstract (sommario):
The main objective of this work is to investigate whether the time required to dry red peppers in the diffusion controlled period can be reduced. For this purpose, the possibility of microwave drying in this period was studied. As comparison parameters the drying rates and color of the products were selected. The conventional drying was conducted under constant external drying conditions with air at 60 0C and 3.5 % RH and 1.0 m/s velocity in a batch dryer. For the microwave drying a domestic microwave oven with three power levels, 286, 397 and 560 W was used. Pre-experiments were done to obtai
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Irawan, Anton. "Isothermal drying of pore networks : influence of pore structure on drying kinetics /." [S.l.] : [s.n.], 2006. http://diglib.uni-magdeburg.de/Dissertationen/2006/antirawan.htm.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Brunzell, Lena. "Energy Efficient Textile Drying." Licentiate thesis, Karlstad University, Faculty of Technology and Science, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-729.

Testo completo
Abstract (sommario):
<p>Traditionally, textiles were dried outdoors with the wind and the sun enhancing the drying process. Tumble dryers offer a fast and convenient way of drying textiles independent of weather conditions. Tumble dryers, however, consume large amounts of electrical energy. Over 4 million tumble dryers are sold each year in Europe and a considerable amount of energy is used for drying of clothes. Increasing energy costs and the awareness about environmental problems related to a large energy use has increased the demand for dryers with better energy efficiency. The aim with this thesis is to show
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Polat, Osman. "Through drying of paper." Thesis, McGill University, 1989. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=75904.

Testo completo
Abstract (sommario):
The first comprehensive set of measurements is obtained for rates of through drying paper with all drying conditions measured and controlled. Complete pressure drop-drying rate curves are determined for 235 handsheets of kraft paper of basis weights 25-150g/m$ sp{ rm 2}$ dried in air over a wide range of temperatures and throughflow rates.<br>The previous procedure of calculating permeability by Darcy's law is substantially in error at relevant throughflow rates. A new characteristic dimension for flow through both dry and moist paper is determined by application of fundamental momentum transp
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Libri sul tema "Drying"

1

Orloff, D. I. High-intensity drying processes: Impulse drying. Institute of Paper Science and Technology, 1991.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Rogers, Barbara Radcliffe. Drying flowers. Michael Friedman Publishing Group, 1994.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Oetjen, Georg-Wilhelm, ed. Freeze-Drying. Wiley-VCH Verlag GmbH, 1999. http://dx.doi.org/10.1002/9783527614080.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Dinçer, İbrahim, and Calin Zamfirescu. Drying Phenomena. John Wiley & Sons, Ltd, 2015. http://dx.doi.org/10.1002/9781118534892.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Toei, Ryozo, and Arun S. Mujumdar, eds. Drying ’85. Springer Berlin Heidelberg, 1985. http://dx.doi.org/10.1007/978-3-662-21830-3.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Office, Energy Efficiency. Spray drying. Dept of the Environment, 1996.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Ford, R. W. Ceramics drying. Pergamon Press, 1986.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Rogers, Barbara Radcliffe. Drying flowers. Friedman/Fairfax Pub., 1993.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

1930-, Strumiłło Czesław, Pakowski Z, and International Drying Symposium (10th : 1996 : Kraków, Poland), eds. Drying 96. Łódź Technical University, 1996.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

1922-, Tōei Ryōzo, Mujumdar A. S, Kagaku Kōgaku Kyōkai (Japan), and International Drying Symposium (4th : 1984 : Kyoto, Japan), eds. Drying '85. Hemisphere Pub. Corp., 1985.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Capitoli di libri sul tema "Drying"

1

Clarke, R. J. "Drying." In Coffee. Springer Netherlands, 1987. http://dx.doi.org/10.1007/978-94-009-3417-7_6.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Vorobiev, Eugene, and Nikolai Lebovka. "Drying." In Processing of Foods and Biomass Feedstocks by Pulsed Electric Energy. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-40917-3_6.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Vieira, Ernest R. "Drying." In Elementary Food Science. Springer US, 1996. http://dx.doi.org/10.1007/978-1-4757-5112-3_11.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Satas, Donatas. "Drying." In Handbook of Pressure Sensitive Adhesive Technology. Springer US, 1989. http://dx.doi.org/10.1007/978-1-4757-0866-0_36.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Anandharamakrishnan, C., and S. Padma Ishwarya. "Drying." In Essentials and Applications of Food Engineering. CRC Press, 2019. http://dx.doi.org/10.1201/9780429430244-10.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Herbert, Stephen. "Drying." In A History of Early Film V2. Routledge, 2023. http://dx.doi.org/10.4324/9781003401407-12.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Dash, Sanjaya K., Pitam Chandra, and Abhijit Kar. "Drying." In Food Engineering. CRC Press, 2023. http://dx.doi.org/10.1201/9781003285076-27.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Jindal, Anil B. "Drying." In AAPS Introductions in the Pharmaceutical Sciences. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-31380-6_5.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Kerkstra, Randy, and Steve Brammer. "Drying." In Injection Molding Advanced Troubleshooting Guide. Carl Hanser Verlag GmbH & Co. KG, 2021. http://dx.doi.org/10.1007/978-1-56990-835-8_9.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Kerkstra, Randy, and Steve Brammer. "Drying." In Injection Molding Advanced Troubleshooting Guide. Carl Hanser Verlag GmbH & Co. KG, 2018. http://dx.doi.org/10.3139/9781569906460.009.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Drying"

1

Hashemi, S. J., and W. J. Murray Douglas. "A Hybrid Drying Process: Cylinder Drying with Through Air After-drying." In Advances in Paper Science and Technology, edited by S. J. I’Anson. Fundamental Research Committee (FRC), Manchester, 2005. http://dx.doi.org/10.15376/frc.2005.1.129.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Rosa, G. S., B. D. Zorzi, K. Machry, P. Krolow, C. M. Moura, and E. G. Oliveira. "Experimental investigation of drying of malt bagasse." In 21st International Drying Symposium. Universitat Politècnica València, 2018. http://dx.doi.org/10.4995/ids2018.2018.7785.

Testo completo
Abstract (sommario):
The aim of this work was to investigate the convective drying process of malt bagasse and to evaluate the influence of this process on the application of this residue as adsorbent in methylene blue removel by adsorption process. The experimental system for drying was a fixed bed dryer with parallel airflow, with operating conditions: air temperature in the range of 40 to 90 oC and air veocity of 2 m/s. The adsorption experiments were perfomed with solution of methylene blue at 70 ppm concentration. The drying kinetics showed a constant drying rate period followed by a falling drying rate. The
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Ohtake, S., A. Langford, B. Balthazor, et al. "Beyond freeze-drying of biologics: vacuum-foam drying and spray freeze-drying." In 21st International Drying Symposium. Universitat Politècnica València, 2018. http://dx.doi.org/10.4995/ids2018.2018.7855.

Testo completo
Abstract (sommario):
The complexity of biotherapeutics in development continues to increase as our capability in discovery and recombinant technology improves. While safety and efficacy remain the two critical aspects of all therapeutics, ensuring adequate stability is a challenge. Freeze-drying is a commonly-used processing technique to enhance the stability of biotherapeutic products, although the lengthy process time and low energy efficiency have led to the search for, and evaluation of, next-generation drying technologies, including spray freeze-drying and vaccum-foam drying. Both processes result in dosage f
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Thorat, Bhaskar, Bhaumik Bheda, Manoj Shinde, and Rajaram Ghadge. "Drying of algae by various drying methods." In 21st International Drying Symposium. Universitat Politècnica València, 2018. http://dx.doi.org/10.4995/ids2018.2018.7761.

Testo completo
Abstract (sommario):
Algae drying was carried out using Vacuum Tray Dryer and an Innovative Solar Conduction Dryer. Algae was dried in a Vacuum Tray Dryer at 60°C under varied pressure conditions and makes use of specially designed double condenser system. The open sun drying and solar conduction dryer (SCD) was also used for algae drying. Comparison between open sun drying and solar conduction dryer were done and it was found that the solar conduction dryer gives high performance than the open sun drying. It was also found that, the conductive heat transfer mode plays a crucial role in the solar conduction dryer.
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Adithya, N., and A. Velumani. "Comparison of drying characteristics of Rohu fish using solar drying against natural drying." In 2ND INTERNATIONAL INTERDISCIPLINARY SCIENTIFIC CONFERENCE ON GREEN ENERGY, ENVIRONMENTAL AND RENEWABLE ENERGY, ADVANCED MATERIALS, AND SUSTAINABLE DEVELOPMENT: ICGRMSD24. AIP Publishing, 2024. http://dx.doi.org/10.1063/5.0237586.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Huang, Xiaoli, T. Li, S. N. Li, Z. H. Wu, and J. Xue. "Hot air drying combined vacuum-filling nitrogen drying of apple slices: Drying characteristics and nutrients." In 21st International Drying Symposium. Universitat Politècnica València, 2018. http://dx.doi.org/10.4995/ids2018.2018.7477.

Testo completo
Abstract (sommario):
In this paper, hot air drying (HAD) was applied when moisture content of apple slices range from 50% to 86%, and then vacuum-filling nitrogen drying (VFND) was used till moisture content reaching 7%. Results showed that, the drying rate of apple slice during VFND period increased with temperature increment and decreased with increment of slice thickness; compared to freezing dried samples, samples dried in this research were owned lower Vc and higher flavonoid; when HAD (70℃,3.0m/s)+VFND(relative pressure 0.08MPa, 50℃) and thickness of 6.0mm, nutrients reached better levels: retentions of Vc,
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Sokolovskyy, Yaroslav, and Oleksiy Sinkevych. "Calculation of the drying agent in drying chambers." In 2017 14th International Conference The Experience of Designing and Application of CAD Systems in Microelectronics (CADSM). IEEE, 2017. http://dx.doi.org/10.1109/cadsm.2017.7916077.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Suherman, Suherman, Riri Marza Rilna, Naufal Afriandi, Evan Eduard Susanto, and Hadiyanto Hadiyanto. "Drying of tomato slices using solar drying method." In THE 2ND INTERNATIONAL SYMPOSIUM OF INDONESIAN CHEMICAL ENGINEERING 2021: Enhancing Innovations and Applications of Chemical Engineering for Accelerating Sustainable Development Goals. AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0112428.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Feng, Shengshan, Chunyi Zhan, Shuzhong Xie, Chunjing Liu, Jiahao Liang, and Yunhua Gao. "Influence Factors of Drying Speed on Water-based Self-drying / Fast-drying Foundry Coatings." In 5th International Conference on Information Engineering for Mechanics and Materials. Atlantis Press, 2015. http://dx.doi.org/10.2991/icimm-15.2015.120.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Adithya, N., and A. Velumani. "Comparative investigation of drying characteristic of crabs with solar drying and natural drying method." In 2ND INTERNATIONAL INTERDISCIPLINARY SCIENTIFIC CONFERENCE ON GREEN ENERGY, ENVIRONMENTAL AND RENEWABLE ENERGY, ADVANCED MATERIALS, AND SUSTAINABLE DEVELOPMENT: ICGRMSD24. AIP Publishing, 2024. http://dx.doi.org/10.1063/5.0237581.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Drying"

1

Orloff, D. I. High-intensity drying processes-impulse drying. Office of Scientific and Technical Information (OSTI), 1991. http://dx.doi.org/10.2172/6626698.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Orloff, D. High-intensity drying processes: Impulse drying. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/5371131.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Orloff, D. I. High-intensity drying processes-impulse drying. Yearly report. Office of Scientific and Technical Information (OSTI), 1991. http://dx.doi.org/10.2172/10143700.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Orloff, D. I., and P. M. Phelan. High-intensity drying processes: Impulse drying. Annual report. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/189097.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Orloff, D. I., P. M. Phelan, and I. Rudman. High-intensity drying processes: Impulse drying. Progress report on furnish evaluations for impulse drying commercialization demonstration. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/278190.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Denig, Joseph, Eugene M. Wengert, and William T. Simpson. Drying hardwood lumber. U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, 2000. http://dx.doi.org/10.2737/fpl-gtr-118.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Pulido, Ramon, ANNA Taconi, Ronald Williams, et al. Advanced Drying Cycle Simulator Thermal Response to Commercial Drying Conditions. Office of Scientific and Technical Information (OSTI), 2023. http://dx.doi.org/10.2172/2431672.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Hanna, H. Mark, and Dana Schweitzer. Grain Drying Energy Use. Iowa State University, Digital Repository, 2016. http://dx.doi.org/10.31274/farmprogressreports-180814-1417.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Hanna, H. Mark, and Shawn Shouse. Grain Drying Energy Use. Iowa State University, Digital Repository, 2017. http://dx.doi.org/10.31274/farmprogressreports-180814-1586.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Pulido, Ramon, Ronald Williams, Beau Baigas, Anna Taconi, and Samuel Durbin. Preliminary Simulations of Commercial Drying Cycles Using the Advanced Drying Cycle Simulator. Office of Scientific and Technical Information (OSTI), 2024. http://dx.doi.org/10.2172/2403037.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Ti possono interessare anche gli elenchi estesi di opere sul tema "Drying":
Articoli di riviste Tesi Libri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia