Segui questo link per vedere altri tipi di pubblicazioni sul tema: Dynamic loading.

Articoli di riviste sul tema "Dynamic loading"

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Dynamic loading".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.

1

Vlasov, P. A. "Loading device for oncoming dynamic loading." Traktory i sel hozmashiny 81, no. 10 (2014): 15–16. http://dx.doi.org/10.17816/0321-4443-65494.

Testo completo
Abstract (sommario):
Methods of running and testing of parts, units and aggregates under load in case of transferring required drive torques through them are considered. The method of loading by oncoming drive torques using inertial loaders is theoretically substantiated.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Moshier, Monty A., Ronald L. Hinrichsen, and Gregory J. Czarnecki. "Dynamic Loading Methodologies." AIAA Journal 41, no. 11 (2003): 2291–94. http://dx.doi.org/10.2514/2.6823.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Tsyganov, V. V. "FEATURES OF MECHANICS DESTRUCTION TRIBOUNITSAT DIFFICULT DYNAMIC LOADING." Eurasian Physical Technical Journal 20, no. 2 (44) (2023): 99–105. http://dx.doi.org/10.31489/2023no2/99-105.

Testo completo
Abstract (sommario):
The mechanics of contact destruction tribounits at a friction in the conditions of difficult dynamicloading is considered. Possibilityof mathematical description of complex damage knots friction is shown, intensities of wear taking into account the features of forming superficial layer at a contact.Methodology of calculation superficial durability and longevity oftribounits is presented and the examples of practical estimation of this interdependence are shown.The model of destruction surface at a friction with a different dynamic loadingis offered, methods of estimation wearproofness on the c
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Щельников, V. Shchelnikov, Мандрица, D. Mandritsa, Мандрица, and P. Mandritsa. "Parameters Definition of Dynamic Loading of the Destroyed Part of a Plate of a Covering at Emergency Explosion on a Starting Complex." Safety in Technosphere 5, no. 5 (2016): 48–53. http://dx.doi.org/10.12737/24151.

Testo completo
Abstract (sommario):
The article considers questions of parameters definition of dynamic loading from the destroyed part of a plate of a covering
 at emergency Explosion on a starting complex. For the estimation of parameters of dynamic loading the approach based
 on an experimentally-theoretical estimation of parameters of pulse loading of contact explosion of a mix of components of
 rocket fuel is used. Dependences for an estimation of parameters of dynamic loading on overlapping of an underlying floor
 of a starting construction are defined; estimations of dynamic loading from the destroyed
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Markov, Iliyan, and Kalin Radlov. "About effect of dynamic loading caused by concrete pump on bending moments, anchor forces and deformations in single level anchored retaining wall." IOP Conference Series: Materials Science and Engineering 1297, no. 1 (2023): 012005. http://dx.doi.org/10.1088/1757-899x/1297/1/012005.

Testo completo
Abstract (sommario):
Abstract This paper explore effect of dynamic loading caused by concrete pump on bending moments, anchor forces and deformations in single level anchored retaining wall. Dynamic loading is obtained by using a special developed dynamic mathematical model of truck-mounted concrete pump, by means of which are calculated the maximal dynamic loadings (acceleration and forces), which are transferred from concrete pump to the soil, and from there accordingly – from soil to the retaining wall under consideration. After that is performed a detailed finite element analysis of the retaining wall, by usin
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Lin, I. H., and R. M. Thomson. "Dynamic cleavage in ductile materials." Journal of Materials Research 1, no. 1 (1986): 73–80. http://dx.doi.org/10.1557/jmr.1986.0073.

Testo completo
Abstract (sommario):
Ductile materials are found to sustain brittle fracture when the crack moves at high speed. This fact poses a paradox under current theories of dislocation emission, because even at high velocities, these theories predict ductile behavior. A theoretical treatment of time-dependent emission and cleavage is given which predicts a critical velocity above which cleavage can occur without emission. Estimates suggest that this velocity is in the neighborhood of the sound velocity. The paper also discusses the cleavage condition under mixed mode loading, and concludes that the cleavage condition invo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Jeong, T. G., and D. B. Bogy. "Numerical Simulation of Dynamic Loading in Hard Disk Drives." Journal of Tribology 115, no. 3 (1993): 370–75. http://dx.doi.org/10.1115/1.2921645.

Testo completo
Abstract (sommario):
The dynamic loading process in hard disk drives is simulated numerically. The effects of the slider’s loading velocity and initial pitch and roll on its dynamics during loading, as well as on slider-disk contacts, are studied by using the dynamic loading simulator. The air bearing forces due to the squeezing and shearing flows are calculated and their contributions to the dynamics of the slider during loading are investigated. Slider-disk contacts are considered in the numerical simulation through generalized impulse-momentum equations. Slider-disk contact criteria are obtained from the numeri
Gli stili APA, Harvard, Vancouver, ISO e altri
8

CHANG, SHUENN-YIH. "CAPABILITY TO CAPTURE DYNAMIC LOADING IN LINEAR DYNAMIC ANALYSIS OF SINGLE DEGREE OF FREEDOM SYSTEMS." International Journal of Structural Stability and Dynamics 13, no. 05 (2013): 1350012. http://dx.doi.org/10.1142/s0219455413500120.

Testo completo
Abstract (sommario):
In this work, the importance of the capability to capture dynamic loading for an integration method is emphasized. In a step-by-step integration procedure, amplitude distortions in the transient and steady-state responses depend on the step discretization error of dynamic loading for each time step. Correlations between amplitude distortion and step discretization error for dynamic loadings are analytically established for a specified integration method. These correlations may be considered as the basic numerical properties in evaluating a step-by-step integration method. As a result, the supe
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Peng, Kang, Ke Gao, Jian Liu, et al. "Experimental and Numerical Evaluation of Rock Dynamic Test with Split-Hopkinson Pressure Bar." Advances in Materials Science and Engineering 2017 (2017): 1–12. http://dx.doi.org/10.1155/2017/2048591.

Testo completo
Abstract (sommario):
Feasibility of rock dynamic properties by split-Hopkinson pressure bar (SHPB) was experimentally and numerically evaluated with ANSYS/LS-DYNA. The effects of different diameters, different loading rates, and different propagation distances on wave dispersion of input bars in SHPB with rectangle and half-sine wave loadings were analyzed. The results show that the dispersion effect on the diameter of input bar, loading rate, and propagation distance under half-sine waveform loading is ignorable compared with the rectangle wave loading. Moreover, the degrees of stress uniformity under rectangle a
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Sabih, Saba. "Harmonic dynamic loading response of reinforced concrete column." MATEC Web of Conferences 162 (2018): 04024. http://dx.doi.org/10.1051/matecconf/201816204024.

Testo completo
Abstract (sommario):
A reinforced concrete column is classified as compression structural element mostly analyzed and designed due to the applied combinations of dead and live loading with other considered loadings. Industries of considerable or relatively great size, production and electrical utilities are very concerned about the presence of dynamic loads in their electrical power systems. This behavior provides current with different components that are multiples of the fundamental frequency of the system which are called harmonics. Reinforced concrete elements such as column must be checked for the strength ca
Gli stili APA, Harvard, Vancouver, ISO e altri
11

James, Ken. "Dynamic Loading of Trees." Arboriculture & Urban Forestry 29, no. 3 (2003): 165–71. http://dx.doi.org/10.48044/jauf.2003.020.

Testo completo
Abstract (sommario):
The dynamic forces on tree structures during periods of high winds is being studied in order to determine the loads on trees and the responses of the trees to those dynamic loads. Field measurements of dynamic forces on trees, branches, and cables have been conducted on urban trees in an attempt to quantify the magnitude of these forces and to provide a basis for evaluating tree stability. Equipment was constructed to measure the dynamic wind loads on tree trunks and branches in situ. This equipment is described, and results are presented which indicate that tree structure is loaded by highly
Gli stili APA, Harvard, Vancouver, ISO e altri
12

Heywood, Rob, Wayne Roberts, and Geoff Boully. "Dynamic Loading of Bridges." Transportation Research Record: Journal of the Transportation Research Board 1770, no. 1 (2001): 58–66. http://dx.doi.org/10.3141/1770-09.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
13

CRAWFORD, LYNDON. "PIPING UNDER DYNAMIC LOADING." Journal of the American Society for Naval Engineers 68, no. 2 (2009): 345–70. http://dx.doi.org/10.1111/j.1559-3584.1956.tb04033.x.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
14

Li, Ziyun, Yunhui Zhu, Qianghui Song, Peiyong Wang, and Dongyan Liu. "Dynamic Mechanical Properties and Failure Characteristics of Sandstone with Pre-Flaws Parallel to the Loading Direction." Sustainability 15, no. 4 (2023): 3587. http://dx.doi.org/10.3390/su15043587.

Testo completo
Abstract (sommario):
Investigations on rock dynamics have been comprehensively focused on when the dynamic impact is perpendicular to the trend of the flaws, while understanding the dynamic mechanical properties and failure characteristics of rock with pre-flaws parallel to the loading direction remains unrevealed. In this study, impact tests are performed to experimentally study the dynamic mechanical properties, failure characteristics, and energy evolution of pre-flawed sandstone using the split Hopkinson pressure bar (SHPB) apparatus, in which the pre-flaws are parallel to the loading direction. The results sh
Gli stili APA, Harvard, Vancouver, ISO e altri
15

Mei, Huihao, Wuming Leng, Rusong Nie, Renpan Tu, Yafeng Li, and Junli Dong. "Experimental research on the dynamic response characteristics of the transition subgrade induced by heavy-haul train passage." Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit 233, no. 9 (2019): 974–87. http://dx.doi.org/10.1177/0954409718822924.

Testo completo
Abstract (sommario):
The dynamic response of the subgrade under moving train loads provides information on subgrade settlement prediction, condition evaluation, and so forth. This paper presents the field dynamics tests on the transition subgrade in the Shuo-Huang heavy-haul railway in China. The variation characteristics of the peak dynamic displacements along the track and subgrade slope were analyzed, and the random distribution characteristics of the peak dynamic displacements at the subgrade shoulder were studied. The response characteristics of the subgrade during the train passage were investigated, and the
Gli stili APA, Harvard, Vancouver, ISO e altri
16

SHIRAI, Yuki, and Kazushi SHIMAZAKI. "EVALUATION BY STATIC LOADING AND DYNAMIC LOADING EXPERIMENTS." AIJ Journal of Technology and Design 26, no. 62 (2020): 136–40. http://dx.doi.org/10.3130/aijt.26.136.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
17

Wang, Huai Liang, and Jun Yu Yuan. "Dynamic Failure Surface of Concrete under Multiaxial Dynamic Loads." Advanced Materials Research 261-263 (May 2011): 228–32. http://dx.doi.org/10.4028/www.scientific.net/amr.261-263.228.

Testo completo
Abstract (sommario):
Study on the dynamic behavior of concrete is important, for the sake of seismic design and safety evaluation of mass concrete structures, such as concrete dams, nuclear reactors and so on. There have been a lot of uniaxial strength experiment data of concrete under dynamic loading, but multiaxial data is scarce, for the test of multiaxial strength of concrete under dynamic loading is difficult, while most mass structures work under multiaxial static and dynamic stress states. In this paper a three-dimension failure criterion of concrete under dynamic loading in octahedral stress space was prop
Gli stili APA, Harvard, Vancouver, ISO e altri
18

Govardhan, T., Achintya Choudhury, and Deepak Paliwal. "Load Distribution in a Rolling Element Bearing under Dynamic Radial Load." Applied Mechanics and Materials 592-594 (July 2014): 1099–103. http://dx.doi.org/10.4028/www.scientific.net/amm.592-594.1099.

Testo completo
Abstract (sommario):
External load in a bearing is transferred from one race to another race through the rolling elements. In the present work, an investigation has been made to estimate the load on a rolling element in a bearing subjected to dynamic loading. The dynamic loading, in the present study, included harmonic and periodic loadings which are deterministic functions of time. The roller load is also investigated under random loading with known statistical values of mean and variance. Numerical values have been obtained for NJ204 bearing with known radial clearance. These results show the variation in the sp
Gli stili APA, Harvard, Vancouver, ISO e altri
19

Oleksij, Fomin, Lovska Alyona, Kovtun Oleksandr, and Nerubatskyi Volodymyr. "DEFINING PATTERNS IN THE LONGITUDINAL LOAD ON A TRAIN EQUIPPED WITH THE NEW CONCEPTUAL COUPLERS." Eastern-European Journal of Enterprise Technologies 2, no. 7 (104) (2020): 33–40. https://doi.org/10.15587/1729-4061.2020.198660.

Testo completo
Abstract (sommario):
The longitudinal-dynamic load on a railroad train has been studied at its steady motion along the track of a homogeneous profile. A value of the longitudinal loading that a train is exposed to has been established. The calculations were carried out for a train consisting of 40 similar semi-wagons. The magnitude of the longitudinal loading, in this case, is taken to equal 1.2 MN. It is important to note that when increasing the motion speed, as well as the weight of a train, the magnitude of the longitudinal load may exceed the specified value. This contributes to the additional loadi
Gli stili APA, Harvard, Vancouver, ISO e altri
20

Raovic, Nevena, Otto Anker Nielsen, and Carlo Giacomo Prato Carlo Giacomo Prato. "DYNAMIC QUEUING TRANSMISSION MODEL FOR DYNAMIC NETWORK LOADING." Transport 32, no. 2 (2015): 146–59. http://dx.doi.org/10.3846/16484142.2015.1062417.

Testo completo
Abstract (sommario):
This paper presents a new macroscopic multi-class dynamic network loading model called Dynamic Queuing Transmission Model (DQTM). The model utilizes ‘good’ properties of the Dynamic Queuing Model (DQM) and the Link Transmission Model (LTM) by offering a DQM consistent with the kinematic wave theory and allowing for the representation of multiple vehicle classes, queue spillbacks and shock waves. The model assumes that a link is split into a moving part plus a queuing part, and p that traffic dynamics are given by a triangular fundamental diagram. A case-study is investigated and the DQTM is co
Gli stili APA, Harvard, Vancouver, ISO e altri
21

Zhang, Jian, Guo-Kai Yuan, Songye Zhu, Quan Gu, Shitang Ke, and Jinghua Lin. "Seismic Analysis of 10 MW Offshore Wind Turbine with Large-Diameter Monopile in Consideration of Seabed Liquefaction." Energies 15, no. 7 (2022): 2539. http://dx.doi.org/10.3390/en15072539.

Testo completo
Abstract (sommario):
With the increasing construction of large-scale wind turbines in seismically active coastal areas, the survivability of these high-rated-power offshore wind turbines (OWTs) in marine and geological conditions becomes extremely important. Although research on the dynamic behaviors of OWTs under earthquakes has been conducted with consideration of the soil-structure interaction, the attention paid to the impact of earthquake-induced seabed liquefaction on OWTs supported by large-diameter monopiles remains limited. In view of this research gap, this study carries out dynamic analyses of a 10 MW O
Gli stili APA, Harvard, Vancouver, ISO e altri
22

Gao, Lian-sheng, Han-cheng Dan, and Liang Li. "Response Analysis of Asphalt Pavement under Dynamic Loadings: Loading Equivalence." Mathematical Problems in Engineering 2019 (July 18, 2019): 1–15. http://dx.doi.org/10.1155/2019/7020298.

Testo completo
Abstract (sommario):
This paper establishes the equivalent relationships between the half-sinusoidal load, triangular load, vertical stepwise load, and moving traffic load. The governing equation was established for analyzing the dynamic responses of pavement, and half-sinusoidal load, triangular load, and vertical stepwise load functions were transformed into Fourier series expressions. The partial differential governing equations were simplified as ordinary differential equations and the analytical solutions were obtained. Further, the solutions were validated through comparing the theoretical results with numer
Gli stili APA, Harvard, Vancouver, ISO e altri
23

Costa, Gustavo, Pierre Rossi, Mariane Rita, Eduardo Fairbairn, and Fernando Ribeiro. "Use of a Semi-Explicit Probabilistic Numerical Model for Concrete Cracking: From Static to Dynamic Loadings." Applied Sciences 14, no. 22 (2024): 10643. http://dx.doi.org/10.3390/app142210643.

Testo completo
Abstract (sommario):
In this paper, concrete cracking is investigated in dynamics through finite element modeling. A probabilistic semi-explicit model, previously developed and validated for static loading, is extended for dynamic loading. The model in statics is based on two material mechanical parameters: the tensile strength and the critical strain-energy release rate in mode I, GIC, of the Linear Elastic Fracture Mechanics (LEFM) theory. Concerning the dynamic aspects of the model, the tensile strength rate effect is modeled by an empirical dynamic-to-static strength ratio (Dynamic Increase Factor—DIF) and a s
Gli stili APA, Harvard, Vancouver, ISO e altri
24

Meng, Meng, Stefan Z. Miska, Mengjiao Yu, and Evren M. Ozbayoglu. "Fully Coupled Modeling of Dynamic Loading of the Wellbore." SPE Journal 25, no. 03 (2019): 1462–88. http://dx.doi.org/10.2118/198914-pa.

Testo completo
Abstract (sommario):
Summary Loadings acting on a wellbore are more realistically regarded as dynamic rather than static, and the wellbore response under dynamic loading can be different from that under static loading. Under dynamic loading, the inertia term should be considered and the changing rate of loading could induce a change in the mechanical properties of the wellbore, which might compromise wellbore stability and integrity. In this paper, a fully coupled poroelastodynamic model is proposed to study wellbore behavior. This model not only considers fully coupled deformation/diffusion effects, but also incl
Gli stili APA, Harvard, Vancouver, ISO e altri
25

Kang, Moon Ki. "Shear Resistance of CIP Anchors under Dynamic Loading: Unreinforced Anchor." Journal of Korean Society of Steel Construction 26, no. 1 (2014): 11. http://dx.doi.org/10.7781/kjoss.2014.26.1.011.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
26

Kang, Moon Ki. "Shear Resistance of CIP Anchors under Dynamic Loading: Reinforced Anchor." Journal of Korean Society of Steel Construction 26, no. 1 (2014): 21. http://dx.doi.org/10.7781/kjoss.2014.26.1.021.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
27

Throne, J. L., and R. C. Progelhof. "Closed-Cell Foam Behavior Under Dynamic Loading—II. Loading Dynamics of Low-Density Foams." Journal of Cellular Plastics 21, no. 1 (1985): 43–50. http://dx.doi.org/10.1177/0021955x8502100105.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
28

Yan, Dong Ming, and Gao Lin. "Failure Mechanism of Concrete in Dynamic Loading." Key Engineering Materials 324-325 (November 2006): 623–26. http://dx.doi.org/10.4028/www.scientific.net/kem.324-325.623.

Testo completo
Abstract (sommario):
Understanding the dynamic behavior of concrete in rapid loading is an issue of great importance in civil engineering. In this study, an experimental program was performed to investigate the dynamic behavior of concrete subjected to different strain-rate loadings. From the test results the rate-dependent effect on the ultimate strength of concrete was confirmed, i.e., the strength increases with the increasing strain rate. The dynamic failure process of concrete in tension and physical mechanism were discussed based on the experimental observations.
Gli stili APA, Harvard, Vancouver, ISO e altri
29

Celikoglu, H. B. "A Dynamic Network Loading Model for Traffic Dynamics Modeling." IEEE Transactions on Intelligent Transportation Systems 8, no. 4 (2007): 575–83. http://dx.doi.org/10.1109/tits.2007.903051.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
30

Reilly, Donald T. "Dynamic Loading of Normal Joints." Rheumatic Disease Clinics of North America 14, no. 3 (1988): 497–502. http://dx.doi.org/10.1016/s0889-857x(21)00861-9.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
31

Pushkov, Victor, Alexey Yurlov, Andrew Okinchits, and Tatiana Naydanova. "Beryllium strain under dynamic loading." EPJ Web of Conferences 94 (2015): 02002. http://dx.doi.org/10.1051/epjconf/20159402002.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
32

Belikova, A. F., S. N. Buravova, and E. V. Petrov. "Strain localization under dynamic loading." Technical Physics 58, no. 8 (2013): 1152–58. http://dx.doi.org/10.1134/s1063784213080057.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
33

Vakili, Fazlollah, Michael R. Viles, Jerry L. Reding, and Neal G. Sheery. "Dynamic Thermal Line Loading Monitor." IEEE Power Engineering Review PER-6, no. 5 (1986): 35. http://dx.doi.org/10.1109/mper.1986.5527934.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
34

Černý, Michal, Josef Filípek, and Pavel Mazal. "Dynamic loading of galvanized parts." Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 58, no. 1 (2010): 33–42. http://dx.doi.org/10.11118/actaun201058010033.

Testo completo
Abstract (sommario):
This work is divided into two parts: the theoretical part includes actual knowledge and points of view about degradation processes in construction materials, anticorrosion protection, zinc coat composition and high frequency fatigue. The laboratory part follow-up existing regulations contents Czech standards and formulate specifications for acquisition of objective information from acceleration la­bo­ra­to­ry tests in condensation chests, mechanical high frequency fatigue tests on pulsator machine and possibilities of evaluation of fatigue tests. Laboratory findings declare to fundamental type
Gli stili APA, Harvard, Vancouver, ISO e altri
35

Irvine, Max. "Dynamic loading on bucketwheel reclaimers." International Journal of Impact Engineering 15, no. 3 (1994): 281–96. http://dx.doi.org/10.1016/s0734-743x(05)80018-1.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
36

Buravova, S. N., A. A. Goncharov, and Ju N. Kiselev. "Surface damage under dynamic loading." Tribology International 29, no. 5 (1996): 357–63. http://dx.doi.org/10.1016/0301-679x(95)00062-9.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
37

Le Bouteiller, Caroline, and Mohamed Naaim. "Aggregate breakage under dynamic loading." Granular Matter 13, no. 4 (2010): 385–93. http://dx.doi.org/10.1007/s10035-010-0235-2.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
38

Vakili, Fazlollah, Michael R. Viles, Jerry L. Reding, and Neal G. Sherry. "Dynamic Thermal Line Loading Monitor." IEEE Transactions on Power Systems 1, no. 2 (1986): 62–66. http://dx.doi.org/10.1109/tpwrs.1986.4334902.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
39

Johannesson, Tomas, and Martin Distner. "Dynamic Loading of Synchronous Belts." Journal of Mechanical Design 124, no. 1 (2000): 79–85. http://dx.doi.org/10.1115/1.1426088.

Testo completo
Abstract (sommario):
In automotive timing belt drives friction history effects must be taken into concern due to rapidly changing loads. Here a spring based model capable of handling dynamic load conditions is presented. The model also covers partial meshing effects and utilizes Coulomb friction. The model shows good agreement with experimental data found in literature. It is proven that when simulating synchronous belt drives during rapidly changing load conditions, using models for quasi-static load conditions stepwise are not sufficient.
Gli stili APA, Harvard, Vancouver, ISO e altri
40

Yokota, Hiroki, Andrés Tovar, and Alexander Robling. "Dynamic muscle loading and mechanotransduction." Bone 51, no. 4 (2012): 826–27. http://dx.doi.org/10.1016/j.bone.2012.07.025.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
41

Wang, Yanbing, Xingyuan Zhou, Ji Kong, and Bingbing Yu. "Dynamic Fracture Experiment of Fractured Rock under Dynamic Loading." Shock and Vibration 2020 (February 14, 2020): 1–22. http://dx.doi.org/10.1155/2020/9761650.

Testo completo
Abstract (sommario):
In order to examine the dynamic mechanical properties, dynamic crack proposition process, and energy loss of fractured rock under dynamic loading, the specimens with different fracture dig angles were processed with Φ50 mm × 50 mm cylindrical sandstone, the impact loading test was conducted on 50 mm stem diameter split Hopkinson pressure bar (SHPB) experiment platform, and the whole process of crack propagation and dynamic failure was recorded using a high-speed camera. As a result, the dynamic mechanical properties such as stress wave fluctuation characteristics, peak strength and stress-stra
Gli stili APA, Harvard, Vancouver, ISO e altri
42

O’Hara, G. Peter. "Dynamic Analysis of a 155 mm Cannon Breech." Shock and Vibration 8, no. 3-4 (2001): 215–21. http://dx.doi.org/10.1155/2001/421852.

Testo completo
Abstract (sommario):
This report describes a finite element analysis of the breech closure for the 155 mm Cannon M199, which is normally mounted on the Towed Howitzer M198. In this configuration it has has an excellent record for reliability in the field and is easy to service. However when the breech is used in an ammunition test environment, some maintenance problems exist. The analysis is for a 9 body problem with 13 contact surfaces and was solved for both static and dynamic load cases. The two dynamic loads were of similar shape with different loading times. The 9 bodies in the model include, a facility mount
Gli stili APA, Harvard, Vancouver, ISO e altri
43

Wang, Yanfeng, Xiaohui Wu, Shaofeng Ji, Faping Xiao, and Dayang Wang. "Evaluation of Mechanical Performance of a New Disc Spring-Cable Counter Pressure Shock Absorber." Applied Sciences 13, no. 15 (2023): 8718. http://dx.doi.org/10.3390/app13158718.

Testo completo
Abstract (sommario):
Mechanical performance evaluation of a new disc spring-cable counter pressure shock absorber is focused on in this study. The proposed shock absorber is always in a compressive working state with energy dissipation capacity under both tension and compression loadings. The design formulas of its axial bearing capacity, vertical stiffness, deformation energy of the shock absorber were derived, and the corresponding specific design process was provided in detail. Experimental and numerical investigations of the mechanical performance were conducted under static and dynamic loadings. The parameter
Gli stili APA, Harvard, Vancouver, ISO e altri
44

Chen, W. H., Z. R. Lu, S. H. Chen, Y. Q. Ni, and W. Y. Liao. "Monitoring Dynamic Characteristics for a Supertall Structure under Different Loading Events." Advanced Materials Research 243-249 (May 2011): 5356–59. http://dx.doi.org/10.4028/www.scientific.net/amr.243-249.5356.

Testo completo
Abstract (sommario):
The Guangzhou New TV Tower (GNTVT), completed its construction in May 2009 in Guangzhou China, is a super tall tube-in-tube structure with a total height of 600m. A complicated structural health monitoring (SHM) system consisting of over 700 sensors has been implemented to the GNTVT for both in-construction and in-service real-time monitoring. This implemented SHM system has monitored the structural responses of the GNTVT after having completed its construction under different loading events (the typhoon, the earthquake and normal wind loading conditions). Firstly, the time history and PSD of
Gli stili APA, Harvard, Vancouver, ISO e altri
45

Fujikake, Kazunori, and Amornthep Somraj. "Dynamic Shear Resistance of RC Beams Based on Modified Compression Field Theory." Key Engineering Materials 711 (September 2016): 799–805. http://dx.doi.org/10.4028/www.scientific.net/kem.711.799.

Testo completo
Abstract (sommario):
The aim of this study was to develop an analytical model to estimate the dynamic shear capacity of RC beams which may exhibit diagonal tension failure under impact and blast loadings. Thus, the modified compression field theory has been extended to dynamic loading in this study. The developed analytical model has been applied to the experimental results obtained from rapid loading tests of RC beams. As a result, the developed analytical model has been in good agreement with the experimental results.
Gli stili APA, Harvard, Vancouver, ISO e altri
46

Song, Xi Xian, Yu Jun Zuo, Wan Cheng Zhu, Cheng Yu Jiang, and Pai Ke Wen. "Numerical Simulation on Effect of Pressure-Released Hole Combined Support with Rockbolt by Dynamic Loading." Applied Mechanics and Materials 490-491 (January 2014): 789–93. http://dx.doi.org/10.4028/www.scientific.net/amm.490-491.789.

Testo completo
Abstract (sommario):
In order to study the effect on the structure of pressure-released hole combined support with rockbolt under dynamic loading, utilize RFPA2D-Dynamics on a numerical simulation of dynamic responses of roadway surrounding rock under different depths and different continued time of stress wave and different amplitudes of stress wave. It had gained the general law of the stress redistribution of roadway surrounding rock under static-dynamic coupling loading, and analysed the damage effect of static-dynamic coupling loading to surrounding rock from the perspective of acoustic emission energy releas
Gli stili APA, Harvard, Vancouver, ISO e altri
47

Ting, John M., Claudia R. Kauffman, and Maryann Lovicsek. "Centrifuge static and dynamic lateral pile behaviour." Canadian Geotechnical Journal 24, no. 2 (1987): 198–207. http://dx.doi.org/10.1139/t87-025.

Testo completo
Abstract (sommario):
The behaviour of a single vertical pile embedded in saturated sand and subjected to cyclic static and dynamic loading is studied using an extensive centrifuge model testing program. A reliable data reduction method allows computation of the dynamic and static cyclic lateral pile resistance–deflection p–y curves. The results are compared with full-scale dynamic test results and oil industry design guidelines.From these comparisons, the centrifuge technique appears to model the dynamic soil–pile system properly. For loadings causing significant nonlinearity, the static stiffness appears to be gr
Gli stili APA, Harvard, Vancouver, ISO e altri
48

Chernobryvko, Marina, Leopold Kruszka, and Yuorii Vorobiev. "Thermo-Elastic-Plastic Constitutive Model for Numerical Analysis of Metallic Structures under Local Impulsive Loadings." Applied Mechanics and Materials 566 (June 2014): 493–98. http://dx.doi.org/10.4028/www.scientific.net/amm.566.493.

Testo completo
Abstract (sommario):
The tasks of dynamic behavior of constructions’ elements under the impulsive loadings modeling are examined. Mathematical models are taken into account to calculate thermo-elastic-plastic deformations, dynamic properties of materials, large deformations and strains. Numerical calculations of the dynamic stress-strain state for steel constructions are conducted for a local impulsive loading.
Gli stili APA, Harvard, Vancouver, ISO e altri
49

Chen, Fengxiao, Jitang Fan, David Hui, Chao Wang, Fuping Yuan, and Xiaolei Wu. "Mechanisms of the improved stiffness of flexible polymers under impact loading." Nanotechnology Reviews 11, no. 1 (2022): 3281–91. http://dx.doi.org/10.1515/ntrev-2022-0437.

Testo completo
Abstract (sommario):
Abstract The flexible polymers have an outstanding impact-resistant performance because of the improved stiffness upon a high speed loading. At the aspect of microstructure, the soft segments make an important contribution. In this article, molecular dynamics simulation is carried out to reveal the dynamic mechanical behavior of a mono helical soft segment. The tensile loadings at various strain rates are conducted. The stress–strain relations and strain rate dependencies of mechanical properties are derived. The evolution of potential energy with straining accompanied by the disentanglement o
Gli stili APA, Harvard, Vancouver, ISO e altri
50

Lu, Hua, Bo Huang, Hua Shuai Zhao, Meng Meng, and Ming Liang. "Dynamic Responses of Red Sandstone with Fluid-Solid Coupling under Impact Loading." Advanced Materials Research 724-725 (August 2013): 1500–1505. http://dx.doi.org/10.4028/www.scientific.net/amr.724-725.1500.

Testo completo
Abstract (sommario):
The research object presented in this paper is coupling effect of porous red sandstone which is more frequently encountered. And this paper use the test system of Split Hopkinson Pressure Bar (SHPB) to survey the impact test action of different porosity red sandstone in different coupling medium in order to obtained the dynamic waveform of fluid-solid coupling red sandstone under impact loading using theoretical analysis and laboratory data. The paper analyzes the impact of porosity, coupling medium on the dynamics characteristics of red sandstone. Based on the experiment study of different co
Gli stili APA, Harvard, Vancouver, ISO e altri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!