Segui questo link per vedere altri tipi di pubblicazioni sul tema: Finite element analysis.

Tesi sul tema "Finite element analysis"

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Vedi i top-50 saggi (tesi di laurea o di dottorato) per l'attività di ricerca sul tema "Finite element analysis".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Vedi le tesi di molte aree scientifiche e compila una bibliografia corretta.

1

Margetts, Lee. "Parallel finite element analysis." Thesis, University of Manchester, 2002. http://www.manchester.ac.uk/escholar/uk-ac-man-scw:70784.

Testo completo
Abstract (sommario):
Finite element analysis is versatile and used widely in a range of engineering andscientific disciplines. As time passes, the problems that engineers and designers areexpected to solve are becoming more computationally demanding. Often theproblems involve the interplay of two or more processes which are physically andtherefore mathematically coupled. Although parallel computers have been availablefor about twenty years to satisfy this demand, finite element analysis is still largelyexecuted on serial machines. Parallelisation appears to be difficult, even for thespecialist. Parallel machines,
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Larsson, Jesper. "Spring Element Evaluation Using Finite Element Analysis." Thesis, Högskolan i Jönköping, Tekniska Högskolan, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-45837.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Wong, S.-W. "Element-by-element methods in transient analysis." Thesis, University of Manchester, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.383902.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Bakhtiari, Siamak. "Stochastic finite element slope stability analysis." Thesis, University of Manchester, 2011. https://www.research.manchester.ac.uk/portal/en/theses/stochastic-finite-element-slope-stability-analysis(c1b451d9-8bf6-43ff-9c10-7b5209fb45c1).html.

Testo completo
Abstract (sommario):
In this thesis, the failures that occurred during the construction of the Jamuna Bridge Abutment in Bangladesh have been investigated. In particular, the influence of heterogeneity on slope stability has been studied using statistical methods, random field theory and the finite element method. The research is divided into three main parts: the statistical characterization of the Jamuna River Sand, based on an extensive in-situ and laboratory database available for the site; calibration of the laboratory data against a double-hardening elastoplastic soil model; and stochastic finite element slo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Monaghan, Dermot James. "Automatically coupling elements of dissimilar dimension in finite element analysis." Thesis, Queen's University Belfast, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.326293.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Berger, Stephanie 1981. "Experimental and finite element analysis of high pressure packer elements." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/28879.

Testo completo
Abstract (sommario):
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2004.<br>Includes bibliographical references (leaf 30).<br>Packer elements are traditionally rubber seals that can operate under specified downhole conditions and provide a seal for either a short-term, retrievable, or a long-term, permanent, completion. In this case a retrievable 19.7cm (7-3/4") packer element for a high-pressure high-temperature (HPHT) environment was designed and tested. The element created a seal between the mandrel, or tubing, and the casing. At high temperature and pressure
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Xiao, Dong Wen. "Efficiency analysis on element decomposition method for stochastic finite element analysis." Thesis, University of Macau, 2000. http://umaclib3.umac.mo/record=b1636334.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Irfanoglu, Bulent. "Boundary Element-finite Element Acoustic Analysis Of Coupled Domains." Phd thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/12605360/index.pdf.

Testo completo
Abstract (sommario):
This thesis studies interactions between coupled acoustic domain(s) and enclosing rigid or elastic boundary. Boundary element-finite element (BE-FE) sound-structure interaction models are developed by coupling frequency domain BE acoustic and FE structural models using linear inviscid acoustic and elasticity theories. Flexibility in analyses is provided by discontinuous triangular and quadrilateral elements in the BE method (BEM), and a rectangular plate and a triangular shell element in the FE method (FEM). An analytical formulation is developed for an extended fundamental sound-struct
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Jacobs, Ralf Theo. "Finite element-boundary element analysis of conformal microstrip antennas." Thesis, Heriot-Watt University, 2001. http://hdl.handle.net/10399/531.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Elofsson, Johan, and Per Martinsson. "Welding simulation with Finite Element Analysis." Thesis, University West, Department of Technology, Mathematics and Computer Science, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-827.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
11

Johannessen, Kjetil André. "An adaptive isogeometric finite element analysis." Thesis, Norwegian University of Science and Technology, Department of Mathematical Sciences, 2009. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-9936.

Testo completo
Abstract (sommario):
<p>In this thesis we will explore the possibilities of making a finite element solver for partial differential equations using the isogeometric framework established by Hughes et al. Whereas general B-splines and NURBS only allow for tensor product refinement, a new technology called T-splines will open for true local refinement. We will give an introduction into T-splines along with B-splines and NURBS on which they are built, presenting as well a refinement algorithm which will preserve the exact geometry of the T-spline and allow for more control points in the mesh. For the solver we will a
Gli stili APA, Harvard, Vancouver, ISO e altri
12

Risa, Adrian Opheim. "Finite element analysis of marine umbilical." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for marin teknikk, 2011. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-15368.

Testo completo
Abstract (sommario):
Background: Marine umbilicals play a vital role in oil and gas production fields. The oil and gas industry is in constant change, as the resources in the reservoirs are ever decreasing. Today oil and gas exploration takes place at increasing depths, and in harsher environments. This means that components like marine umbilicals are getting more advanced. Thus accurate structural analysis is important. The focus in this thesis is an umbilical consisting of 19 copper conductors. The goal is to model it in ABAQUS, and compare the results with laboratory testing. Results: Stress distribution and fa
Gli stili APA, Harvard, Vancouver, ISO e altri
13

Witte, Holger. "Magnet design using finite element analysis." Thesis, University of Oxford, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.491607.

Testo completo
Abstract (sommario):
This thesis applies the method of finite element software to calculate pulsed high field magnets. The calculations address the structural and thermal load of pulsed magnets during discharge and at peak field. The most successful currently-used coil designs from different magnet laboratories are assessed with these methods. The results are compared against wellestablished analytic programs; arising differences are discussed. Particular emphasis is on the coil designs developed for the pulsed field facility in the Clarendon Laboratory, Oxford, UK. The facility, named after Nikolas Kurti, is desc
Gli stili APA, Harvard, Vancouver, ISO e altri
14

Wagner, Roy E. "Finite element analysis of wire coating." Thesis, University of Ottawa (Canada), 1987. http://hdl.handle.net/10393/5236.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
15

Wanstreet, Pinar. "Finite element analysis of slope stability." Morgantown, W. Va. : [West Virginia University Libraries], 2007. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5480.

Testo completo
Abstract (sommario):
Thesis (M.S.)--West Virginia University, 2007.<br>Title from document title page. Document formatted into pages; contains xii, 86 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 80-82).
Gli stili APA, Harvard, Vancouver, ISO e altri
16

Perry, William H. "Finite element analysis of polymer flows." Ohio : Ohio University, 1985. http://www.ohiolink.edu/etd/view.cgi?ohiou1184072781.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
17

Mousa, A. I. "Finite element analysis of shell structure." Thesis, Cardiff University, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.532180.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
18

Lee, J. S. "Finite element analysis of structured media." Thesis, Swansea University, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.637869.

Testo completo
Abstract (sommario):
The main objective of this research is to develop techniques for the analysis of the load-deformation behaviour of bodies made of structured and composite media using the finite element method and the homogenisation technique. The conventional finite element method is not economical for the analysis of structured and composite media as a large number of elements are required to model different constituents and their interfaces. In this study, an approximate method called <i>homogenisation</i> technique, in which average mechanical characteristics of the structured media are considered, is deve
Gli stili APA, Harvard, Vancouver, ISO e altri
19

Wilkerson, Lucas T. "FINITE ELEMENT ANALYSIS OF CANCELLOUS BONE." UKnowledge, 2012. http://uknowledge.uky.edu/me_etds/17.

Testo completo
Abstract (sommario):
A variety of pathologies exist which increase the likelihood of bone fracture. Present methods for determining the fracture risk of a specific patient are based exclusively on the amount of bone present. While the quantity of bone tissue is correlated with strength, it neglects to account for bone’s intricate microarchitecture. To assess the effect of bone quality on strength, a methodology was developed for the structural analysis of cancellous bone biopsies. Thirty biopsies were selected from a pre-existing biopsy bank, and scanned using a SCANCO µCT-40 at a resolution of 30 microns. Cortica
Gli stili APA, Harvard, Vancouver, ISO e altri
20

El-Erris, Hazim Faysal. "Finite element analysis of shell structures." Thesis, Cardiff University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.329658.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
21

Begg, Michael Colin. "Finite element analysis of induction motors." Thesis, Imperial College London, 1986. http://hdl.handle.net/10044/1/37942.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
22

Behroozi, Mohammad H. "Finite element analysis of aircraft tyres." Thesis, University of Birmingham, 2014. http://etheses.bham.ac.uk//id/eprint/5390/.

Testo completo
Abstract (sommario):
In this thesis, the Finite Element (FE) Analysis of aircraft tyres is presented. The modelling and simulations of detailed construction of tyre enable tyre manufacturers to evaluate new designs and development before a prototype is fabricated, and aim to reduce the research costs and efforts to optimise the current tyre design of tyres. The material properties is key in the FE modelling and analysis, a number of sample from the rubber compounds and reinforcement were used to characterise the elastic, hyperelastic and viscoelastic behaviour of material. In this research, two aircraft tyres were
Gli stili APA, Harvard, Vancouver, ISO e altri
23

Hsiao, Yung-Chin. "Finite element analysis of laser forming." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/17440.

Testo completo
Abstract (sommario):
Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Ocean Engineering, 1997, and Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1997.<br>Includes bibliographical references (leaves 158-161).<br>by Yung-Chin Hsiao.<br>M.S.
Gli stili APA, Harvard, Vancouver, ISO e altri
24

Noelting, Swen Erik 1960. "FINITE ELEMENT ANALYSIS OF SHELL STRUCTURES." Thesis, The University of Arizona, 1986. http://hdl.handle.net/10150/275502.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
25

Xia, Jianjun. "Finite Element Analysis of Ship Collisions." Thesis, Virginia Tech, 2001. http://hdl.handle.net/10919/34133.

Testo completo
Abstract (sommario):
The serious consequence of ship collisions necessitates the development of regulations and requirements for the subdivision and structural design of ships so that damage and environmental pollution is reduced, and safety is improved. A simplified collision model (SIMCOL) is currently being developed at Virginia Tech to conduct probabilistic analysis of damage in ship collisions and ultimately optimize ship structural designs to improve crashworthiness. Collision data for validation of SIMCOL is very difficult to obtain, and model testing is very costly. Finite Element Analysis (FEA) provides a
Gli stili APA, Harvard, Vancouver, ISO e altri
26

Bentler, David J. "Finite Element Analysis of Deep Excavations." Diss., Virginia Tech, 1998. http://hdl.handle.net/10919/30767.

Testo completo
Abstract (sommario):
This dissertation describes enhancements made to the finite element program, SAGE, and research on the performance of deep excavations. SAGE was developed at Virginia Tech for analysis of soil-structure interaction problems (Morrison, 1995). The purpose of the work described in this text with SAGE was to increase the capabilities of the program for soil-structure analysis. The purpose of the research on deep excavations was to develop a deeper understanding of the behavior of excavation support systems. The significant changes made to SAGE during this study include implementation of Biot
Gli stili APA, Harvard, Vancouver, ISO e altri
27

Wilson, Kelly A. "Finite Element Analysis of Breast Implants." Thesis, Virginia Tech, 1999. http://hdl.handle.net/10919/32972.

Testo completo
Abstract (sommario):
The Breast Implant Lifetime Study at Virginia Tech, on which this thesis is based, seeks to develop methods and data for predicting the lifetime of saline-filled implants. This research developed Finite Element Analysis (FEA) models to evaluate the stresses that are present in the silicone breast implant material under different loading situations. The FEA work was completed using the commercial codes PATRAN and ABAQUS. PATRAN was used for pre- and post-processing, while ABAQUS was used for the actual analysis and to add fluid and contact elements not supported by PATRAN. Many different lo
Gli stili APA, Harvard, Vancouver, ISO e altri
28

Seay, Patricia Anne. "Finite Element Analysis of Geotextile Tubes." Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/36592.

Testo completo
Abstract (sommario):
The three-dimensional behavior of geotextile tubes is studied using finite element modeling. Two initial shapes are investigated, one with a flat length-to-width ratio of 2:1 and the other with a flat length-to-width ratio of 5:1. The tubes are modeled resting on elastic foundations. For each initial shape, the elastic foundation is modeled using two different stiffnesses; one allows a minimum amount of &quot;sinking&quot; into the foundation and the other allows a considerable amount. The weight of the geotextile is included. Hydrostatic pressure is applied internally to each initially f
Gli stili APA, Harvard, Vancouver, ISO e altri
29

Perry, William H. Jr. "Finite element analysis of polymer flows." Ohio University / OhioLINK, 1985. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1184072781.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
30

Mahomed, N. "Finite element analysis of groundwater contamination." Master's thesis, University of Cape Town, 1990. http://hdl.handle.net/11427/8294.

Testo completo
Abstract (sommario):
Includes bibliographical references.<br>The purpose of this study was to develop a computational Finite Element model, validated by experimentation, to assist in the understanding of groundwater contamination problems. It was mainly aimed at studying the extent and manner of travel of contaminants in the saturated soil of unconfined aquifers which may be pumped by of wells.
Gli stili APA, Harvard, Vancouver, ISO e altri
31

Zheng, Yi. "Finite Element Analysis for Fixture Stiffness." Link to electronic thesis, 2005. http://www.wpi.edu/Pubs/ETD/Available/etd-050505-130954/.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
32

Nava, José Manuel Franco. "Finite element versus boundary element analysis of finite strain elastic and elastoplastic fracture mechanics." Thesis, Cranfield University, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.401612.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
33

Lai, Zhi Cheng. "Finite element analysis of electrostatic coupled systems using geometrically nonlinear mixed assumed stress finite elements." Diss., Pretoria : [s.n.], 2007. http://upetd.up.ac.za/thesis/available/etd-05052008-101337/.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
34

Tseng, Gordon Bae-Ji. "Investigation of tetrahedron elements using automatic meshing in finite element analysis /." Online version of thesis, 1992. http://hdl.handle.net/1850/10699.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
35

Svensson, Daniel, and Tomas Walander. "Evaluation of an Interphase Element using Explicit Finite Element Analysis." Thesis, University of Skövde, School of Technology and Society, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-3895.

Testo completo
Abstract (sommario):
<p>A research group at University of Skövde has developed an interphase element for implementation in the commercial FE-software Abaqus. The element is using the Tvergaard & Hutchinson cohesive law and is implemented in Abaqus Explicit version 6.7 using the VUEL subroutine. This bachelor degree project is referring to evaluate the interphase element and also highlight problems with the element.</p><p>The behavior of the interphase element is evaluated in mode I using Double Cantilever Beam (DCB)-specimens and in mode II using End Notch Flexure (ENF)-specimens. The results from the simulations
Gli stili APA, Harvard, Vancouver, ISO e altri
36

Galuta, Ezeedin M. "Combined boundary element and finite element analysis of composite bridges." Thesis, University of Ottawa (Canada), 1994. http://hdl.handle.net/10393/6814.

Testo completo
Abstract (sommario):
In this thesis, the coupling of boundary element and finite element methods and its application to analyze bridges are studied for the first time. The coupling technique is implemented to analyze slab on girders and box girder bridges. The boundary element method is employed to model the bridge deck while the finite element method is used to model the girders. The finite elements and boundary elements are connected at a number of interface nodes in the longitudinal direction. For the finite element region, a static condensation technique is applied to condense the non-interface degrees of free
Gli stili APA, Harvard, Vancouver, ISO e altri
37

Abou, Ghadir Mohamed Mohamed Moustafa. "Combined finite strip and finite element methods in structural analysis." Thesis, University of Leeds, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.446434.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
38

Varghese, Julian. "Hierarchical strategy for rapid finite element analysis." Thesis, Texas A&M University, 2003. http://hdl.handle.net/1969.1/232.

Testo completo
Abstract (sommario):
A new methodology is introduced where the natural hierarchical character of model descriptions and simulation results are exploited to expedite analysis of problems. The philosophy and the different concepts involved are illustrated by implementing the strategy to solve some practical problems. The end result was a mix of mechanics, well-designed data structures and software interfaces that forms a rapid analysis environment. This can be very advantageous for cases where a sequence of analyses is required because of safety concerns or cost. When designing a structure, it is common to make fre
Gli stili APA, Harvard, Vancouver, ISO e altri
39

Li, Jingang. "Isogeometric Finite Element Analysis Using T-Splines." Diss., CLICK HERE for online access, 2009. http://contentdm.lib.byu.edu/ETD/image/etd3159.pdf.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
40

Bodur, Mehmet Ata. "Finite Element Analysis Of Discontinuous Contact Problems." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/12606964/index.pdf.

Testo completo
Abstract (sommario):
Contact is a phenomenon faced in every day life, which is actually a complex problem to tackle for engineers. Most of the times, may be impossible to get analytic or exact results for the interaction of bodies in contact. In this thesis work, solution of the frictionless contact of an elastic body, touching to a rigid planar surface for two-dimensional elasticity<br>namely plane stress, plane strain and axi-symmetric formulations is aimed. The problem is solved numerically, with Finite Element Method, and an Object Oriented computer program in C++ for this purpose is written, and the results
Gli stili APA, Harvard, Vancouver, ISO e altri
41

Zhang, Lin. "Generalized finite element method for multiscale analysis." Diss., Texas A&M University, 2003. http://hdl.handle.net/1969.1/1141.

Testo completo
Abstract (sommario):
This dissertation describes a new version of the Generalized Finite Element Method (GFEM), which is well suited for problems set in domains with a large number of internal features (e.g. voids, inclusions, etc.), which are practically impossible to solve using the standard FEM. The main idea is to employ the mesh-based handbook functions which are solutions of boundary value problems in domains extracted from vertex patches of the employed mesh and are pasted into the global approximation by the Partition of Unity Method (PUM). It is shown that the p-version of the Generalized FEM using mesh-b
Gli stili APA, Harvard, Vancouver, ISO e altri
42

Ganendra, Dennis. "Finite element analysis of laterally loaded piles." Thesis, Imperial College London, 1993. http://hdl.handle.net/10044/1/7304.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
43

Chen, Yuan Liang. "Finite element analysis of reinforced concrete members." Thesis, University of Ottawa (Canada), 1985. http://hdl.handle.net/10393/4842.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
44

Nelson, Gregory Scott. "Finite element analysis of the interventricular septum." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0033/NQ38494.pdf.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
45

Nandula, Ramgopal. "Finite element analysis of eccentrically loaded angles." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0013/MQ52474.pdf.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
46

Bucci, Filippo. "Finite element analysis of repaired concrete structures." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0003/MQ40918.pdf.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
47

Valentin, Rodolfo V. "Finite element analysis of adhesively bonded joints." Thesis, Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/17575.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
48

Gray, Hans. "Finite element analysis of the human tibia." Thesis, University of Oxford, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.442458.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
49

Gislason, Magnus Kjartan. "Finite element analysis of the wrist joint." Thesis, University of Strathclyde, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.501701.

Testo completo
Abstract (sommario):
The wrist is a very anatomically complex joint and little has been reported about the biomechanics of the wrist joint. Cadaveric measurements have been carried out to investigate the load transfer characteristics. Due to the complexity of the joint, analytical models are difficult to create, but the finite element method is generally employed to create a numerical model of the joint. Current finite element studies of the wrist have only looked at a small subset of the joint or created a simplified model using un-physiological boundary conditions. The presented work reports on the creation of s
Gli stili APA, Harvard, Vancouver, ISO e altri
50

Paw, G. F. "Parallel processing procedures for finite element analysis." Thesis, Swansea University, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.638432.

Testo completo
Abstract (sommario):
The objective of the research is to improve the solution capability of a finite element system by the use of parallel processing techniques. Initial research began with the transputer system at a time when the transputer was considered the ultimate parallel machine. The transputer based parallel program LINSUB was developed to solve linear static stress analysis problems using a modified Cholesky algorithm for substruturing. Further developments in this field were halted when it became clear that other parallel systems, namely, those concerned with workstation clusters, were moving rapidly ahe
Gli stili APA, Harvard, Vancouver, ISO e altri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!