Accedi

Bibliografie tematiche / Fluid mechanics

Indice

Articoli di riviste
Tesi
Libri
Capitoli di libri
Atti di convegni
Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Fluid mechanics"

Autore: Grafiati

Pubblicato: 4 giugno 2021

Ultima modifica: 28 giugno 2025

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Fluid mechanics".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Fluid mechanics"

1

Nishihara, Kazuyoshi, and Koji Mori. "OS22-11 Mechanical Active Noise Control for Multi Blade Fan(Fluid Machinery and Functional Fluids,OS22 Experimental method in fluid mechanics,FLUID AND THERMODYNAMICS)." Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2015.14 (2015): 275. http://dx.doi.org/10.1299/jsmeatem.2015.14.275.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Ido, Yasushi, Hiroki Yokoyama, and Hitoshi Nishida. "OS22-13 Viscous Property of Magnetic Compound Fluids Containing Needle-like Particles(Fluid Machinery and Functional Fluids,OS22 Experimental method in fluid mechanics,FLUID AND THERMODYNAMICS)." Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2015.14 (2015): 277. http://dx.doi.org/10.1299/jsmeatem.2015.14.277.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Abdukhamidov, Sardor. "UNDERSTANDING THE ELEMENTS OF FLUID MECHANICS." SYNAPSES: INSIGHTS ACROSS THE DISCIPLINES 1, no. 1 (August 29, 2024): 44–47. https://doi.org/10.5281/zenodo.13479140.

Testo completo

Abstract (sommario):

Fluid mеchanics is a branch оf physics that dеals with thе bеhaviоr оf fluids (liquids and gasеs) in mоtiоn and at rеst. It is fundamеntal tо many еnginееring and sciеntific disciplinеs, including mеchanical еnginееring, civil еnginееring, and еnvirоnmеntal sciеncе. This articlе prоvidеs a cоmprеhеnsivе оvеrviеw оf thе basic еlеmеnts оf fluid mеchanics, including thе prоpеrtiеs оf fluids, fluid statics, fluid dynamics, and thе fundamеntal еquatiоns gоvеrning fluid bеhaviоr. Thrоugh this еxplоratiоn, thе articlе aims tо dееpеn thе undеrstanding оf fluid mеchanics principlеs and thеir applicatiоns in variоus fiеlds.

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Bland, J. A., D. Pnueli, and C. Gutfinger. "Fluid Mechanics." Mathematical Gazette 78, no. 482 (July 1994): 221. http://dx.doi.org/10.2307/3618595.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Quinlan, Suzanne. "Fluid mechanics." Nursing Standard 14, no. 41 (June 28, 2000): 26. http://dx.doi.org/10.7748/ns.14.41.26.s42.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Radev, St, F. R. A. Onofri, A. Lenoble, and L. Tadrist. "Fluid Mechanics." Journal of Theoretical and Applied Mechanics 43, no. 2 (June 1, 2013): 5–30. http://dx.doi.org/10.2478/jtam-2013-0011.

Testo completo

Abstract (sommario):

Abstract The paper review key results [1-14] of the joint researches conducted by IMech and IUSTI. In the First part, we review models and experimental results on the linear and nonlinear instability of a capillary jet including both axisymmetric and nonaxisymmetric disturbances. In the Second part, results on draw resonances, occurring during a glass fibre process are reviewed, as well as the unique optical models and methods developed to perform these studies.

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Liggett, J. A., and B. E. Larock. "Fluid Mechanics." Journal of Hydraulic Engineering 120, no. 10 (October 1994): 1233. http://dx.doi.org/10.1061/(asce)0733-9429(1994)120:10(1233).

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Barnes, H. A. "Fluid Mechanics." Journal of Non-Newtonian Fluid Mechanics 37, no. 2-3 (January 1990): 387. http://dx.doi.org/10.1016/0377-0257(90)90014-3.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Drazin, Philip. "Fluid mechanics." Physics Education 22, no. 6 (November 1, 1987): 350–54. http://dx.doi.org/10.1088/0031-9120/22/6/004.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Gartshore, I. S. "Fluid mechanics." International Journal of Heat and Fluid Flow 10, no. 4 (December 1989): 372–73. http://dx.doi.org/10.1016/0142-727x(89)90033-7.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Fluid mechanics"

1

Wylie, Jonathan James. "Geological fluid mechanics." Thesis, University of Cambridge, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.627211.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Hildyard, M. L. "The fluid mechanics of filters." Thesis, University of Leeds, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.233871.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Goode, Peter Allan. "Momentum transfer across fluid-fluid interfaces in porous media." Thesis, Heriot-Watt University, 1991. http://hdl.handle.net/10399/847.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Coffey, Christopher J. "The fluid mechanics of emptying boxes." Thesis, Imperial College London, 2006. http://hdl.handle.net/10044/1/11978.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Connick, Owen. "The fluid mechanics of hybrid ventilation." Thesis, Imperial College London, 2013. http://hdl.handle.net/10044/1/39347.

Testo completo

Abstract (sommario):

A low-energy ventilation system is often incorporated as one of the major energy saving measures in sustainable building design. These systems often employ a hybrid strategy in which mechanical equipment, governed by a computer controlled building management system, is used to assist or manage a naturally-driven airflow - the latter occurring due to the density difference between warm air inside and cooler air outside the room. Hybrid ventilation flows are poorly understood and the principal aim of the research was to enhance our understanding of the fluid mechanics through complementary theoretical and experimental modelling. The research begins by comparing solely natural and solely mechanical ventilation of a room. The hybrid ventilation of a room is then considered under the combined effect of naturally occurring and mechanically imposed pressure differences, in which a mechanical fan imposes a fixed airflow rate through one vent, thereby altering the natural pressure distribution. Simplified theoretical models, to describe the ventilation airflow rate through a room and the resulting mean air temperature, were developed for solely natural ventila- tion, solely mechanical ventilation and, finally, hybrid ventilation. At each stage the theoretical model was compared with results from small-scale experiments, and good agreement was demonstrated. From the theoretical investigation, the neutral pressure level emerged as a key pa- rameter in determining the characteristics of the ventilation airflow. Moreover, it was found that the airflow rate through an open vent can be controlled remotely by managing the position of the neutral pressure level, and that this can be achieved by varying the magnitude of the mechanically imposed airflow rate. Experimental investigations revealed that, as the neutral pressure level approached the plane of a vent, quasi-steady pulsing flows and bi-directional or exchange flows were observed. The complicated fluid dynamics involved in these flows provides inspiration for significant future work.

Gli stili APA, Harvard, Vancouver, ISO e altri

6

PAULINO, RIVANIA HERMOGENES. "USING MULTIGRID TECHNIQUES ON FLUID MECHANICS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 1997. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=19462@1.

Testo completo

Abstract (sommario):

COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR<br>Este trabalho trata da solução numérica das equações de Navier-Stokes, na forma vorticidade-função corrente, via método das Diferenças Finitas e técnicas de aceleração baseadas no uso de malhas múltiplas. Embora outras opções tenham sido consideradas, a que melhor funcionou tratou o problema de forma não acoplada: a solução da equação de vorticidade foi obtida pela uso desta aceleração e a solução da equação de função corrente, uma equação puramente elíptica, foi resolvida via método das relaxações sucessivas. O código desenvolvido foi aplicado a diversos problemas, inclusive ao problema da cavidade com tampa móvel, em diversos números de Reynolds, típico no teste de simuladores em Dinâmica dos Fluidos. Foram testados um método clássico (armazenamento da correção) e o método FAZ (Full Approximation Storage). Os resultados obtidos mostram claramente os ganhos computacionais obtidos na formulação escolhida. Expressando em percentual, valores com 80 por cento de ganho foram obtidos se comparados os resultados do método multigrid com o método iterativo básico utilizado (S.O.R.), indicando o potencial do uso desta técnica para problemas mais complexo incluindo aqueles em coordenadas generalizadas.<br>This works deals with the numerical solution of the Navier-Stokes equations, written in the stream function-vorticity form, by the finite difference method and acceleration techniques using multiple meshes. Although other solution schemes have been investigated, best results were obtained by treating the problem in a non-coupled form: the solution for the vorticity equation was obtained by the multigrid method and the solution of the streamfunction equation, which is purely elliptic, was solved by the S.O.R. (Successive over relaxation method). The computer code was applied to several problems, including the wall driven problem considering a wide range of Reynolds numbers, which is a typical benchmark problem for testing fluid-dynamic simulations. The classical method (storage of the correction) and the methos FAS (Full Approximation Storage) have been tested. The results obtained clearly show that a very efficient computational scheme has been achieved with the multigrid method. For example, when comparing this method with the basic S.O.R. method, relative gains in the order of 80 per cent have been obtained. This indicates that the present technique has potential use in more complicated fluid dynamics problems including those involving generalized coordinates.

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Heimerdinger, Daniel John. "Fluid mechanics in a magnetoplasmadynamic thruster." Thesis, Massachusetts Institute of Technology, 1988. http://hdl.handle.net/1721.1/34030.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Lea, Patrick D. "Fluid Structure Interaction with Applications in Structural Failure." Thesis, Northwestern University, 2014. http://pqdtopen.proquest.com/#viewpdf?dispub=3605735.

Testo completo

Abstract (sommario):

<p> Methods for modeling structural failure with applications for fluid structure interaction (FSI) are developed in this work. Fracture as structural failure is modeled in this work by both the extended finite element method (XFEM) and element deletion. Both of these methods are used in simulations coupled with fluids modeled by computational fluid dynamics (CFD). The methods presented here allow the fluid to pass through the fractured areas of the structure without any prior knowledge of where fracture will occur. Fracture modeled by XFEM is compared to an experimental result as well as a test problem for two phase coupling. The element deletion results are compared with an XFEM test problem, showing the differences and similarities between the two methods. </p><p> A new method for modeling fracture is also proposed in this work. The new method combines XFEM and element deletion to provide a robust implementation of fracture modeling. This method integrates well into legacy codes that currently have element deletion functionality. The implementation allows for application by a wide variety of users that are familiar with element deletion in current analysis tools. The combined method can also be used in conjunction with the work done on fracture coupled with fluids, discussed in this work. </p><p> Structural failure via buckling is also examined in an FSI framework. A new algorithm is produced to allow for structural subcycling during the collapse of a pipe subjected to a hydrostatic load. The responses of both the structure and the fluid are compared to a non-subcycling case to determine the accuracy of the new algorithm. </p><p> Overall this work looks at multiple forms of structural failure induced by fluids modeled by CFD. The work extends what is currently possible in FSI simulations.</p>

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Woods, Andrew W. "Geophysical fluid flows." Thesis, University of Cambridge, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.306472.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Bocchi, Edoardo. "Compressible-incompressible transitions in fluid mechanics : waves-structures interaction and rotating fluids." Thesis, Bordeaux, 2019. http://www.theses.fr/2019BORD0279/document.

Testo completo

Abstract (sommario):

Ce manuscrit porte sur les transitions compressible-incompressible dans les équations aux dérivées partielles de la mécanique des fluides. On s'intéresse à deux problèmes : les structures flottantes et les fluides en rotation. Dans le premier problème, l'introduction d'un objet flottant dans les vagues induit une contrainte sur le fluide et les équations gouvernant le mouvement acquièrent une structure compressible-incompressible. Dans le deuxième problème, le mouvement de fluides géophysiques compressibles est influencé par la rotation de la Terre. L'étude de la limite à rotation rapide montre que le champ vectoriel de vitesse tend vers une configuration horizontale et incompressible.Les structures flottantes constituent un exemple particulier d'interaction fluide-structure, où un solide partiellement immergé flotte à la surface du fluide. Ce problème mathématique modélise le mouvement de convertisseurs d'énergie marine. En particulier, on s'intéresse aux bouées pilonnantes, installées proche de la côte où les modèles asymptotiques en eaux peu profondes sont valables. On étudie les équations de Saint-Venant axisymétriques en dimension deux avec un objet flottant à murs verticaux se déplaçant seulement verticalement. Les hypothèses sur le solide permettent de supprimer le problème à bord libre associé avec la ligne de contact entre l'air, le fluide et le solide. Les équations pour le fluide dans le domaine extérieur au solide sont donc écrites comme un problème au bord quasi-linéaire hyperbolique. Celui-ci est couplé avec une EDO non-linéaire du second ordre qui est dérivée de l'équation de Newton pour le mouvement libre du solide. On montre le caractère bien posé localement en temps du système couplé lorsque que les données initiales satisfont des conditions de compatibilité afin de générer des solutions régulières.Ensuite on considère une configuration particulière: le retour à l'équilibre. Il s'agit de considérer un solide partiellement immergé dans un fluide initialement au repos et de le laisser retourner à sa position d'équilibre. Pour cela, on utilise un modèle hydrodynamique différent, où les équations sont linearisées dans le domaine extérieur, tandis que les effets non-linéaires sont considérés en dessous du solide. Le mouvement du solide est décrit par une équation intégro-différentielle non-linéaire du second ordre qui justifie rigoureusement l'équation de Cummins, utilisée par les ingénieurs pour les mouvements des objets flottants. L'équation que l'on dérive améliore l'approche linéaire de Cummins en tenant compte des effets non-linéaires. On montre l'existence et l'unicité globale de la solution pour des données petites en utilisant la conservation de l'énergie du système fluide-structure.Dans la deuxième partie du manuscrit, on étudie les fluides en rotation rapide. Ce problème mathématique modélise le mouvement des flots géophysiques à grandes échelles influencés par la rotation de la Terre. Le mouvement est aussi affecté par la gravité, ce qui donne lieu à une stratification de la densité dans les fluides compressibles. La rotation génère de l'anisotropie dans les flots visqueux et la viscosité turbulente verticale tend vers zéro dans la limite à rotation rapide. Notre interêt porte sur ce problème de limite singulière en tenant compte des effets gravitationnels et compressibles. On étudie les équations de Navier-Stokes-Coriolis anisotropes compressibles avec force gravitationnelle dans la bande infinie horizontale avec une condition au bord de non glissement. Celle-ci et la force de Coriolis donnent lieu à l'apparition des couches d'Ekman proche du bord. Dans ce travail on considère des données initiales bien préparées. On montre un résultat de stabilité des solutions faibles globales pour des lois de pression particulières. La dynamique limite est décrite par une équation quasi-géostrophique visqueuse en dimension deux avec un terme d'amortissement qui tient compte des couches limites<br>This manuscript deals with compressible-incompressible transitions arising in partial differential equations of fluid mechanics. We investigate two problems: floating structures and rotating fluids. In the first problem, the introduction of a floating object into water waves enforces a constraint on the fluid and the governing equations turn out to have a compressible-incompressible structure. In the second problem, the motion of geophysical compressible fluids is affected by the Earth's rotation and the study of the high rotation limit shows that the velocity vector field tends to be horizontal and with an incompressibility constraint.Floating structures are a particular example of fluid-structure interaction, in which a partially immersed solid is floating at the fluid surface. This mathematical problem models the motion of wave energy converters in sea water. In particular, we focus on heaving buoys, usually implemented in the near-shore zone, where the shallow water asymptotic models describe accurately the motion of waves. We study the two-dimensional nonlinear shallow water equations in the axisymmetric configuration in the presence of a floating object with vertical side-walls moving only vertically. The assumptions on the solid permit to avoid the free boundary problem associated with the moving contact line between the air, the water and the solid. Hence, in the domain exterior to the solid the fluid equations can be written as an hyperbolic quasilinear initial boundary value problem. This couples with a nonlinear second order ODE derived from Newton's law for the free solid motion. Local in time well-posedness of the coupled system is shown provided some compatibility conditions are satisfied by the initial data in order to generate smooth solutions.Afterwards, we address a particular configuration of this fluid-structure interaction: the return to equilibrium. It consists in releasing a partially immersed solid body into a fluid initially at rest and letting it evolve towards its equilibrium position. A different hydrodynamical model is used. In the exterior domain the equations are linearized but the nonlinear effects are taken into account under the solid. The equation for the solid motion becomes a nonlinear second order integro-differential equation which rigorously justifies the Cummins equation, assumed by engineers to govern the motion of floating objects. Moreover, the equation derived improves the linear approach of Cummins by taking into account the nonlinear effects. The global existence and uniqueness of the solution is shown for small data using the conservation of the energy of the fluid-structure system.In the second part of the manuscript, highly rotating fluids are studied. This mathematical problem models the motion of geophysical flows at large scales affected by the Earth's rotation, such as massive oceanic and atmospheric currents. The motion is also influenced by the gravity, which causes a stratification of the density in compressible fluids. The rotation generates anisotropy in viscous flows and the vertical turbulent viscosity tends to zero in the high rotation limit. Our interest lies in this singular limit problem taking into account gravitational and compressible effects. We study the compressible anisotropic Navier-Stokes-Coriolis equations with gravitational force in the horizontal infinite slab with no-slip boundary condition. Both this condition and the Coriolis force cause the apparition of Ekman layers near the boundary. They are taken into account in the analysis by adding corrector terms which decay in the interior of the domain. In this work well-prepared initial data are considered. A stability result of global weak solutions is shown for power-type pressure laws. The limit dynamics is described by a two-dimensional viscous quasi-geostrophic equation with a damping term that accounts for the boundary layers

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Libri sul tema "Fluid mechanics"

1

H, Power, ed. Bio-fluid mechanics. Southampton: Computational Mechanics Publications, 1995.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Spurk, Joseph H. Fluid mechanics. 2nd ed. Berlin: Springer, 2008.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Durst, Franz. Fluid Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-71343-2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Spurk, Joseph H. Fluid Mechanics. Berlin, Heidelberg: Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/978-3-642-58277-6.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Boxer, G. Fluid Mechanics. London: Macmillan Education UK, 1988. http://dx.doi.org/10.1007/978-1-349-09805-7.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Spurk, Joseph H., and Nuri Aksel. Fluid Mechanics. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-30259-7.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Widden, Martin. Fluid Mechanics. London: Macmillan Education UK, 1996. http://dx.doi.org/10.1007/978-1-349-11334-7.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Douglas, J. F. Fluid mechanics. 3rd ed. Harlow: Longman Scientific & Technical, 1995.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Brewster, Hilary D. Fluid mechanics. Jaipur, India: Oxford Book Co., 2009.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

White, Frank M. Fluid mechanics. 7th ed. New York, N.Y: McGraw Hill, 2011.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Capitoli di libri sul tema "Fluid mechanics"

1

Larson, Mats G., and Fredrik Bengzon. "Fluid Mechanics." In Texts in Computational Science and Engineering, 289–325. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-33287-6_12.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Betounes, David. "Fluid Mechanics." In Partial Differential Equations for Computational Science, 245–98. New York, NY: Springer New York, 1998. http://dx.doi.org/10.1007/978-1-4612-2198-2_10.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Lawson, Thomas B. "Fluid Mechanics." In Fundamentals of Aquacultural Engineering, 84–110. Boston, MA: Springer US, 1995. http://dx.doi.org/10.1007/978-1-4615-7047-9_6.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Ng, Xian Wen. "Fluid Mechanics." In Engineering Problems for Undergraduate Students, 579–728. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-13856-1_5.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Kaviany, M. "Fluid Mechanics." In Mechanical Engineering Series, 17–118. New York, NY: Springer New York, 1995. http://dx.doi.org/10.1007/978-1-4612-4254-3_2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Kaviany, M. "Fluid Mechanics." In Mechanical Engineering Series, 429–508. New York, NY: Springer New York, 1995. http://dx.doi.org/10.1007/978-1-4612-4254-3_8.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Knudson, Duane. "Fluid Mechanics." In Fundamentals of Biomechanics, 191–209. Boston, MA: Springer US, 2003. http://dx.doi.org/10.1007/978-1-4757-5298-4_8.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Kuwana, Kazunori. "Fluid Mechanics." In Encyclopedia of Wildfires and Wildland-Urban Interface (WUI) Fires, 1–8. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-319-51727-8_149-1.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Kaviany, M. "Fluid Mechanics." In Mechanical Engineering Series, 15–113. New York, NY: Springer US, 1991. http://dx.doi.org/10.1007/978-1-4684-0412-8_2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Kaviany, M. "Fluid Mechanics." In Mechanical Engineering Series, 385–463. New York, NY: Springer US, 1991. http://dx.doi.org/10.1007/978-1-4684-0412-8_8.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Fluid mechanics"

1

MANOFF, S. "LAGRANGIAN FLUID MECHANICS." In Proceedings of the 5th International Workshop on Complex Structures and Vector Fields. WORLD SCIENTIFIC, 2001. http://dx.doi.org/10.1142/9789812810144_0017.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Vradis, George C. "Heat Transfer and Fluid Mechanics of Herschel-Bulkley Fluids." In ASME 1998 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/imece1998-0452.

Testo completo

Abstract (sommario):

Abstract A comprehensive review of the heat transfer phenomena related to the flow of purely viscous non-Newtonian fluids exhibiting a yield stress in some simple and complex geometries is presented. Both attached and separated flows of Bingham and Herschel-Bulkley fluids are discussed. The presence of a yield-stress is shown to significantly impact the heat transfer and flow characteristics, as compared to those in the case of a Newtonian fluid, in particular in the cases where separation of the flow would be expected.

Gli stili APA, Harvard, Vancouver, ISO e altri

3

"Fluid mechanics, turbulence, wind power." In CONV-09. Proceedings of International Symposium on Convective Heat and Mass Transfer in Sustainable Energy. Connecticut: Begellhouse, 2009. http://dx.doi.org/10.1615/ichmt.2009.conv.910.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Boettcher, Konrad, Marcel Schade, Claudius Terkowsky, and Tobias R. Ortelt. "Virtual Labs in Fluid Mechanics." In 2023 6th Experiment@ International Conference (exp.at'23). IEEE, 2023. http://dx.doi.org/10.1109/exp.at2358782.2023.10545825.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Redekopp, L. "The resonantly-forced Korteweg-DeVries equation and sediment resuspension." In Theroretical Fluid Mechanics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1996. http://dx.doi.org/10.2514/6.1996-2147.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Sobieczky, Helmut. "Theoretical knowledge base for accelerated transonic design." In Theroretical Fluid Mechanics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1996. http://dx.doi.org/10.2514/6.1996-2115.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Cramer, M. "Transonic flows of arbitrary gases." In Theroretical Fluid Mechanics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1996. http://dx.doi.org/10.2514/6.1996-2116.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Cole, J., L. Cook, and G. Schleiniger. "An unsteady transonic flow - Flow about a suddenly deflected wedge." In Theroretical Fluid Mechanics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1996. http://dx.doi.org/10.2514/6.1996-2117.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Kluwick, A., and G. Lindner. "Perturbation analysis of steady and unsteady transonic flow through cascades." In Theroretical Fluid Mechanics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1996. http://dx.doi.org/10.2514/6.1996-2118.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Malmuth, Norman, and Julian Cole. "Asymptotic theory of slender configurations in and out of wind tunnels." In Theroretical Fluid Mechanics Conference. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1996. http://dx.doi.org/10.2514/6.1996-2119.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Fluid mechanics"

1

Monin, A. S., and A. M. Yaglom. Statistical Fluid Mechanics: The Mechanics of Turbulence. Fort Belvoir, VA: Defense Technical Information Center, September 1999. http://dx.doi.org/10.21236/ada398728.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Puterbaugh, Steven L., David Car, and S. Todd Bailie. Turbomachinery Fluid Mechanics and Control. Fort Belvoir, VA: Defense Technical Information Center, January 2010. http://dx.doi.org/10.21236/ada514567.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Martinez-Sanchez, Manuel. Physical Fluid Mechanics in MPD Thrusters. Fort Belvoir, VA: Defense Technical Information Center, September 1987. http://dx.doi.org/10.21236/ada190309.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Anderson, D. M., G. B. McFadden, and A. A. Wheeler. Diffuse-interface methods in fluid mechanics. Gaithersburg, MD: National Institute of Standards and Technology, 1997. http://dx.doi.org/10.6028/nist.ir.6018.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Car, David, and Steven L. Puterbaugh. Fluid Mechanics of Compression System Flow Control. Fort Belvoir, VA: Defense Technical Information Center, July 2005. http://dx.doi.org/10.21236/ada444617.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Bdzil, John Bohdan. Fluid Mechanics of an Obliquely Mounted MIV Gauge. Office of Scientific and Technical Information (OSTI), March 2018. http://dx.doi.org/10.2172/1429987.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Lipfert, F., M. Daum, G. Hendrey, and K. Lewin. Fluid mechanics and spatial performance of face arrays. Office of Scientific and Technical Information (OSTI), May 1989. http://dx.doi.org/10.2172/5292902.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Seume, J., G. Friedman, and T. W. Simon. Fluid mechanics experiments in oscillatory flow. Volume 1. Office of Scientific and Technical Information (OSTI), March 1992. http://dx.doi.org/10.2172/10181069.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Leidermark, Daniel, and Magnus Andersson, eds. Reports in Applied Mechanics 2022. Linköping University Electronic Press, February 2024. http://dx.doi.org/10.3384/9789180754156.

Testo completo

Abstract (sommario):

This is the first volume of the concurring series of Reports in Applied Mechanics, which is based on the outcome of the advanced project course TMPM07 in Applied Mechanics at Link¨oping University during the autumn of 2022. The course lay-up is based on several industrial related projects within the field of Solid Mechanics, concerning fatigue, topology optimisation, structural dimensioning, contacts etc, and Fluid Mechanics, concerning fluid dynamics, flow, aerodynamics, heat transfer etc. The students tackle industry relevant projects in close collaboration with industry from near and neighbouring regions and work in project groups to solve the given tasks within the time limit of the course. Close collaboration with the industry is necessary to define planning, update and feedback for further evaluation at the industry. Three projects were performed during the course of 2022, two within Solid Mechanics and one in Fluid Mechanics. The projects were all performed in tight collaboration with industry partners, and had a close application to real industrial problems. A good opportunity for the students to show-off all their gained knowledge and apply in the best possible way to make innovative solutions in the respective projects. Something they all managed to do with success!

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Eriksson, Robert, and Magnus Andersson. Reports in Applied Mechanics 2023. Edited by Daniel Leidermark. Linköping University Electronic Press, August 2024. http://dx.doi.org/10.3384/9789180755917.

Testo completo

Abstract (sommario):

This is the second volume of the concurring series of Reports in Applied Mechanics, which is based on the outcome of the advanced project course TMPM10 in Applied Mechanics at Linköping University during the autumn of 2023. The course lay-up is based on several industrial or in-house research related projects within the field of Solid Mechanics concerning fatigue, topology optimisation, structural dimensioning, contacts etc, and Fluid Mechanics concerning fluid dynamics, flow, aerodynamics, heat transfer etc. The students tackle industry or forefront research relevant projects in close collaboration with industry from near and neighbouring regions or the university and work in project groups to solve the given tasks within the time limit of the course. Close collaboration with the industry is necessary to define planning, update and feedback for further evaluation at the industry. This year there were a total of six projects performed during the course of 2023, four within Solid Mechanics and two in Fluid Mechanics. Some projects were performed in tight collaboration with industry partners, and had a close application to real industrial problems. The other were related to in-house research projects, pushing the research front forward. This has been a good opportunity for the students to show-off all their gained knowledge and apply it in the best possible way to make innovative solutions in the respective projects. Something they all managed to do with success!

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!