Letteratura scientifica selezionata sul tema "Laminated fabrics"

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Laminated fabrics".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Laminated fabrics"

1

Mühlstädt, Mike, Wolfgang Seifert, Matthias ML Arras, Stefan Maenz, Klaus D. Jandt, and Jörg Bossert. "An advanced geometrical model for laminated woven fabrics using Lamé exponents with enhanced accuracy." Journal of Composite Materials 52, no. 11 (August 23, 2017): 1443–55. http://dx.doi.org/10.1177/0021998317725570.

Testo completo
Abstract (sommario):
Three-dimensional stiffness tensors of laminated woven fabrics used in high-performance composites need precise prediction. To enhance the accuracy in three-dimensional stiffness tensor prediction, the fabric’s architecture must be precisely modeled. We tested the hypotheses that: (i) an advanced geometrical model describes the meso-level structure of different fabrics with a precision higher than established models, (ii) the deviation between predicted and experimentally determined mean fiber-volume fraction ( cf) of laminates is below 5%. Laminates of different cf and fabrics were manufactur
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Kim, Hyun-Ah. "Water Repellency/Proof/Vapor Permeability Characteristics of Coated and Laminated Breathable Fabrics for Outdoor Clothing." Coatings 12, no. 1 (December 23, 2021): 12. http://dx.doi.org/10.3390/coatings12010012.

Testo completo
Abstract (sommario):
This study examined the water repellency (WR), waterproof, and water vapor permeability (WVP) characteristics of twelve types of laminated and coated woven fabrics for outdoor clothing. These characteristics were compared with the fabric structural parameters, such as cover factor, thickness, and weight, and surface modification (finishing) factors, such as coating, laminating, and Teflon treatments. In addition, an eco-friendly process for surface modification was proposed followed by a summary. Superior waterproof-breathable characteristics with 100% water-repellency were achieved in specime
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Huang, Zheng-Ming, X. C. Teng, and S. Ramakrishna. "Progressive Failure Analysis of Laminated Knitted Fabric Composites Under 3-Point Bending." Journal of Thermoplastic Composite Materials 14, no. 6 (November 2001): 499–522. http://dx.doi.org/10.1106/uw1g-83l2-91w9-g47y.

Testo completo
Abstract (sommario):
The bending behavior of laminated beams reinforced with differently arranged plain-weft knitted fabrics has been investigated in this paper. Experiments were carried out to measure the bending stiffness and strength of six layers knitted fabric rein-forced epoxy composite laminates under 3-point bending. The laminate lay-ups of [0/0/0/0/0/0], [90/90/90/90/90/90] and [0/-45/45/45/-45/0] have been taken into account, where 0 denotes that the fabric wale direction is arranged along the beam axial direction. A simulation procedure is presented to analyze the bending property of the laminated beams
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Kim, Hyun-Ah. "Moisture Vapor Resistance of Coated and Laminated Breathable Fabrics Using Evaporative Wet Heat Transfer Method." Coatings 11, no. 10 (September 26, 2021): 1157. http://dx.doi.org/10.3390/coatings11101157.

Testo completo
Abstract (sommario):
This study examined the effects of the fiber materials, fabric structural parameters, and surface modification method on the moisture vapor resistance of coated and laminated fabrics according to the measuring method in comparison with evaporative wet heat transfer method. The moisture vapor resistance (Ref) of the coated and laminated fabrics measured using evaporative wet heat transfer method was much more precise than water vapor transmission rate (WVTR) and water vapor permeability (WVP) measured using American Society for Testing and Materials (ASTM) and Japanese Industrial Standard (JIS)
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Chen, Pei Wei, Yu Ling Li, and Xu Wei Chen. "The Study of Bursting Property of Tetr-Axial Fabric." Advanced Materials Research 627 (December 2012): 130–37. http://dx.doi.org/10.4028/www.scientific.net/amr.627.130.

Testo completo
Abstract (sommario):
By weaving four sets of yarn ends at 45° angles, formed a “米” sharp in the interlacing point, a tetr-axial Fabric is fabricated. Because of the existence of the bias yarns, the tetr-axial fabric has the similar tensile property in almost all directions of fabric plane, excellent impact resistance, good stability of fabric structure, and so on. This paper, the bursting property and thicknesses of tetr-axial fabric, laminated quadri-directional fabric and conventional woven fabrics are compared, with which they have the same areal density. The results showed that, the thickness of tetr-axial fab
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Takatera, Masayuki, Ken Ishizawa, and KyoungOk Kim. "Prediction of creep behavior of laminated woven fabric with adhesive interlining under low stress in the bias direction." Textile Research Journal 87, no. 3 (July 22, 2016): 285–95. http://dx.doi.org/10.1177/0040517516629144.

Testo completo
Abstract (sommario):
The effect of adhesive interlining on the creep behavior of a woven fabric in the bias direction was investigated. Three-element viscoelastic models were used to approximate the creep behavior of a face fabric and adhesive interlining. The creep model of a laminated fabric comprised a six-element model in which two three-element models are connected in parallel with the three-element model. Creep tests were carried out using face fabrics, adhesive interlinings, and their laminated fabrics without and with bonding adhesive interlining by hanging samples in the 45° bias direction under their own
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Kan, Chi Wai, Clare Man Ching Ko, Kittisak Ariyakuare, Wasana Changmuong, and Rattanaphol Mongkholrattanasit. "Study on Air Permeability and Warmth Retention Ability of Polyurethane Foam Plying with Fabrics." Applied Mechanics and Materials 866 (June 2017): 233–39. http://dx.doi.org/10.4028/www.scientific.net/amm.866.233.

Testo completo
Abstract (sommario):
In this study, we evaluated warmth retention ability of polyurethane foam (non-laminated and laminated) plying with fabrics. The warmth retention ratio, measured by KES-F7, was used for expressing the thermal property of plied samples. Experimental results revealed that the warmth retention ratio of samples that were plied with fabrics were higher than the foams in plain (i.e. without plying with fabric). For non-laminated foams, the fabrics had generally increased the warmth retention ratio by 10%. For laminated foams, the increase was about 4 to 5% in the warm retention ratio. By comparing t
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Wei, Sai Nan, Qian Li, Ji Ming Yao, Rui Fang Cui, and Tian Sun. "Optimum Design of Flexible Microwave Absorption Fabrics." Advanced Materials Research 960-961 (June 2014): 39–42. http://dx.doi.org/10.4028/www.scientific.net/amr.960-961.39.

Testo completo
Abstract (sommario):
In order to develop flexible absorption fabric and study the effects of specifications on absorption properties, two-layer laminated fabrics were designed according to thickness matching and impedance matching. Stainless steel core-spun yarn fabrics were used as first layer which easily realized matching to the free space, Ni-Fe fiber consisted of second layer because its strong dielectric loss and magnetic loss. The reflectivity of fabrics were measured by the means of "arch testing method" in the range from 2~18 GHz. The results showed that the reflectivities of laminated fabrics can below-2
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Lin, Yan Yu, Mei-Chen Lin, Ching-Wen Lou, Yueh-Sheng Chen, and Jia-Horng Lin. "Thermoplastic Laminated Composites Applied to Impact Resistant Protective Gear: Structural Design and Development." Polymers 15, no. 2 (January 6, 2023): 292. http://dx.doi.org/10.3390/polym15020292.

Testo completo
Abstract (sommario):
Laminated composites have been commonly applied to all fields. When made into laminated composites, Kevlar woven fabrics are able to provide the required functions. In this study, two types of TPU are incorporated to improve the intralayer features of Kevlar/TPU laminated composites. Hence, the Kevlar/TPU laminated composites consist of firmly bonded laminates while retaining flexibility of the fabrics. Being the interlayer of the laminated composites, the TPU layer provides adhesion while strengthening the tensile property, dynamic puncture resistance, and buffer strength of Kevlar/TPU lamina
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Hasan, K. M. Faridul, Péter György Horváth, and Tibor Alpár. "Potential fabric-reinforced composites: a comprehensive review." Journal of Materials Science 56, no. 26 (May 26, 2021): 14381–415. http://dx.doi.org/10.1007/s10853-021-06177-6.

Testo completo
Abstract (sommario):
AbstractFabric-based laminated composites are used considerably for multifaceted applications in the automotive, transportation, defense, and structural construction sectors. The fabrics used for composite materials production possess some outstanding features including being lighter weight, higher strength, and lower cost, which helps explain the rising interest in these fabrics among researchers. However, the fabrics used for laminations are of different types such as knit, woven, and nonwoven. Compared to knitted and nonwoven fabrics, woven fabrics are widely used reinforcement materials. C
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Tesi sul tema "Laminated fabrics"

1

Kocer, Hasan Basri Broughton Roy. "Laminated and hybrid soft body armor for ballistic applications." Auburn, Ala., 2007. http://repo.lib.auburn.edu/2007%20Fall%20Theses/Kocer_Hasan_7.pdf.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Sikkil, Kaarthik K. "Finite element damage modeling of plain weave fabrics." Morgantown, W. Va. : [West Virginia University Libraries], 2003. http://etd.wvu.edu/templates/showETD.cfm?recnum=3234.

Testo completo
Abstract (sommario):
Thesis (M.S.)--West Virginia University, 2003.<br>Title from document title page. Document formatted into pages; contains ix, 101 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 83-85).
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Ujjin, Rapee Mechanical &amp Manufacturing Engineering Faculty of Engineering UNSW. "Prediction of bearing failure in pin-loaded laminates." Awarded by:University of New South Wales. School of Mechanical and Manufacturing Engineering, 2007. http://handle.unsw.edu.au/1959.4/28197.

Testo completo
Abstract (sommario):
This thesis presents the results of an investigation of bearing failure at a loaded hole in carbon fibre composite laminates. The investigation included finite element analysis and a program of experimental testing for quasi-isotropic laminates, uni-directional laminates and laminates with fibres steered along predefined trajectories. The investigation formed part of a research program in the Cooperative Research Centre for Advanced Composite Structures Ltd (CRC-ACS) support by the Office of Naval Research from the United States. Work in progress in the CRC includes research defined in this th
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Sarin, Siddartha. "Liquid transport mechanisms in cotton-polypropylene laminated nonwoven fabrics influencing pesticide penetration." Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-01102009-063449/.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Pecku, Suven. "The use of thermoplastic starch for the modification of hydrophilic breathable membranes." Diss., Pretoria : [s.n.], 2009. http://upetd.up.ac.za/thesis/available/etd-06302009-175421/.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Sutton, Corey R. "Characterization of Resistance Change in Stretchable Silver Ink Screen Printed on TPU-Laminated Fabrics Under Cyclic Tensile Loading." DigitalCommons@CalPoly, 2019. https://digitalcommons.calpoly.edu/theses/2089.

Testo completo
Abstract (sommario):
A stretchable silver ink was screen printed to TPU sheets, then tensile coupons of the TPU, both bare and laminated to cotton, Denim and spandex fabric, were subjected to 1000 cycles of 20% uniaxial strain. In-situ resistance measurements of printed traces were processed to generate datasets of maximum and minimum resistance per cycle. A mechanistic fit model was used to predict the resistance behavior of the ink across TPU/fabric levels. The results show that traces strained on TPU laminated to spandex (polyester) fibers had an average rate of increase in resistance significantly lower than t
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Dib, Wassim. "Comportement mécanique de tissus à voiles, en fibres synthétiques, sous sollicitations biaxiales et déformation finie." Thesis, Grenoble, 2014. http://www.theses.fr/2014GRENI006/document.

Testo completo
Abstract (sommario):
Ce travail concerne l'étude théorique, expérimentale et numérique du comportement mécanique de matériaux tissés et de toiles laminées à base de fibres synthétiques, destinés à la fabrication des voiles, comme le polyester ou le Kevlar. Une approche théorique originale a été proposée ; elle permet une prise en compte du comportement spécifique des fils, de l'enduction et de leurs interactions. La modélisation, qui en résulte, permet de décrire le comportement biaxial des matériaux tissés et des toiles, en chargements cycliques complexes, avec une prise en compte des déformations finies, des eff
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Belmonte, H. M. S. "Notched strength of woven fabric composites." Thesis, University of Surrey, 2002. http://epubs.surrey.ac.uk/774243/.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Munden, Daniel Christopher. "Development of a Progressive Failure Model for Notched Woven Composite Laminates." Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/85058.

Testo completo
Abstract (sommario):
As part of the Composite Technology for Exploration (CTE) project at NASA, woven fabric composites are being investigated for their use in Space Launch System (SLS) hardware. Composites are more difficult to analyze than isotropic materials and require more complex methods for predicting failure. NASA is seeking a method for predicting the damage initiation and propagation of woven fabric composites in order to utilize these materials effectively in SLS hardware. This work focuses on notched woven fabric composites under tensile loading. An analytical model consisting of a macro-level failure
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Manger, Christopher I. C. "Failure of notched woven GFRP composites : damage analysis and strength modelling." Thesis, University of Surrey, 1999. http://epubs.surrey.ac.uk/738/.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Libri sul tema "Laminated fabrics"

1

Fung, Walter. Coated and laminated textiles. Boca Raton, FL: CRC Press, 2002.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

England), Textile Institute (Manchester, ed. Smart textile coatings and laminates. Boca Raton, FL: CRC Press, 2010.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Woven fabric composites. Lancaster, Pa: Technomic Pub. Co., 1994.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Tennyson, R. C. Evaluation of failure criterion for graphite/epoxy fabric laminates. Hampton, Va: National Aeronautics and Space Administration, Langley Research Center, 1985.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Bogdanovich, Alexander. Mechanics of textile and laminated composites: With applications to structural analysis. London: Chapman & Hall, 1996.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

AATCC Symposium. (1998 Braintree, Massachusetts). Coated and laminated fabrics: 2000 & beyond : [papers given at] AATCC Symposium, April 7-8, 1998. Research Triangle Park, N.C: AATCC, 1998.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Commission, United States International Trade. Fabric and expanded neoprene laminate from Taiwan: Determination of the commission in investigation no. 731-TA-371 (preliminary) under the Tariff Act of 1930, together with the information obtained in the investigation. Washington, DC: U.S. International Trade Commission, 1987.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

United States International Trade Commission. Fabric and expanded neoprene laminate from Taiwan: Determination of the commission in investigation no. 731-TA-371 (final) under the Tariff Act of 1930, together with the information obtained in the investigation. Washington, DC: U.S. International Trade Commission, 1987.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Commission, United States International Trade. Fabric and expanded neoprene laminate from Japan: Determination of the Commission in investigation no. 731-TA-206 (final) under the Tariff Act of 1930, together with the information obtained in the investigation. Washington, D.C: U.S. International Trade Commission, 1985.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

AATCC Symposium. (1998 Braintree, Massachusetts). Coated and laminated fabrics: 2000 & beyond : [extra papers given at AATCC Symposium, April 7-8, 1998]. Research Triangle Park, N.C: AATCC, 1998.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Capitoli di libri sul tema "Laminated fabrics"

1

Scott, R. A. "Coated and laminated fabrics." In Chemistry of the Textiles Industry, 210–48. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-011-0595-8_7.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Majumdar, Abhijit, and Unsanhame Mawkhlieng. "Fibres and Fabrics for Aerostats and Airships." In Coated and Laminated Textiles for Aerostats and Airships, 81–105. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9780429432996-3.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Reis, Benilde, Rui Miguel, José Lucas, Madalena Pereira, Cláudia Pinheiro, João Carvalho, Gilda Santos, Fernando Moreira da Silva, and Manuel Santos Silva. "Design of Fashionable and Functional Tri-Laminated Wool Fabrics for Leisurewear Considering Comfort." In Advances in Industrial Design, 593–601. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-80829-7_74.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

De Falco, Francesca, Emilia Di Pace, Mariacristina Cocca, Maurizio Avella, Bernadette Scholz, Ruediger Fox, and Martin Mayershofer. "First Investigation of Microfibre Release from the Washing of Laminated Fabrics for Outdoor Apparel." In Springer Water, 277–81. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-45909-3_44.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Reis, Benilde, Rui Miguel, José Lucas, Madalena Pereira, Cláudia Pinheiro, João Carvalho, Rosário Grazina, Fernando Moreira da Silva, and Manuel Santos Silva. "Design of Fashionable and Functional Tri-laminated Wool Fabrics for Leisurewear Considering Drape and Touch." In Advances in Industrial Design, 654–62. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-80829-7_81.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Gooch, Jan W. "Laminated Fabric." In Encyclopedic Dictionary of Polymers, 418. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_6762.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Hazell, Paul J. "Woven Fabrics and Composite Laminates for Armour Applications." In Armour, 361–89. 2nd ed. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003322719-9.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Paik, Kyung-Wook, and Seung-Yoon Jung. "Metal-Laminated Fabric Substrates and Flexible Textile Interconnection." In Flexible, Wearable, and Stretchable Electronics, 249–68. First edition. | Boca Raton : CRC Press, 2020. | Series: Devices, circuits, & systems: CRC Press, 2020. http://dx.doi.org/10.1201/9780429263941-10.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Russo, Pietro, Giorgio Simeoli, Valentina Lopresto, Antonio Langella, and Ilaria Papa. "Environmental Friendly Thermoplastic Composite Laminates Reinforced with Jute Fabric." In Advances in Natural Fibre Composites, 119–26. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-64641-1_11.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Oytana, C., D. Varchon, M. Dody, and M. Pierre. "Viscoplastic Strains of a Glass Woven Fabric Based Laminate." In Composite Structures 3, 733–47. Dordrecht: Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-4952-2_52.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Laminated fabrics"

1

Aly-Hassan, Mohamed S., Yuka Kobayashi, Asami Nakai, Hiroyuki Hamada, and Hiroshi Hatta. "Mechanical Properties and Fracture Mechanism of CF Flat Braided Composites With Dispersed Carbon Nanofibers in the Matrix." In ASME 2008 International Manufacturing Science and Engineering Conference collocated with the 3rd JSME/ASME International Conference on Materials and Processing. ASMEDC, 2008. http://dx.doi.org/10.1115/msec_icmp2008-72017.

Testo completo
Abstract (sommario):
In this research, laminated flat braided carbon fabrics were performed via flattening tubular braided fabrics with braiding angle of ±45° by applying carefully compressive loads laterally on the tubular fabrics. Then, carbon fiber reinforced epoxy matrix composites were fabricated from the above-mentioned biaxial fabrics with and without uniformly dispersed carbon nanofibers throughout the epoxy matrix. Three loading percentages of carbon nanofibers (specifically, 0.5, 1, and 2 wt%) were dispersed in the matrix of the composites to enhance the matrix and interlaminar/inter-ply properties. The
Gli stili APA, Harvard, Vancouver, ISO e altri
2

David, N. V., A. Zurina, M. R. Aziz, M. N. Rafiq, M. Syafiq, and Raja Sundram. "Ballistic Penetration Performance of a Unidirectional Woven Basalt Fiber Laminated Protective Armor." In ASME 2019 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/imece2019-11162.

Testo completo
Abstract (sommario):
Abstract Contemporary military and other law enforcement operations are technology-driven with weapons and ammunition that demand a flexible, damage- and moisture-resistant, and lightweight protective materials with superior energy absorbing capacity. Ballistic fabrics made from high performance synthetic fibers such as para-aramid and natural fibers including basalt, and composites utilizing these fabrics, are among the leading materials for armor systems. Basalt fibers, which are extracted from igneous volcanic rocks, are natural fibers with mechanical and thermo-physical properties that are
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Kirschning, Manfred K., and Petra Darmstädter-Wilmsen. "Heat Shielding of Automotive Components: Chemical Vapor Deposition Aluminized Fabrics Versus Laminated Aluminum Foil Fabrics." In SAE World Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2008. http://dx.doi.org/10.4271/2008-01-1090.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

David, N. V., M. J. Jori Roslan, M. Qhairul Amri, I. Joel Ryan, and Raja Sundram. "V50 Ballistic Performance of Unidirectional Woven Basalt Fiber Laminated Composites." In ASME 2017 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/imece2017-70903.

Testo completo
Abstract (sommario):
Ballistic fabrics made from high performance fibers such as para-aramid (synthetic) and basalt (natural) fibers, and composites utilizing these fabrics, are among the leading materials for soft body armor systems. Modern military and other law enforcement operations are technology-driven with weapons and ammunition that demand a flexible, damage- and moisture-resistant, and lightweight ballistic fabrics with superior energy absorbing capacity. Basalt fibers, which are extracted from igneous volcanic rocks, are natural fibers with mechanical and thermo-physical properties that are generally com
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Aly-Hassan, Mohamed S., Yuka Kobayashi, Asami Nakai, and Hiroyuki Hamada. "Tensile and Shear Properties of Biaxial Flat Braided Carbon/Epoxy Composites With Dispersed Carbon Nanofibers in the Matrix." In ASME 2008 2nd Multifunctional Nanocomposites and Nanomaterials International Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/mn2008-47057.

Testo completo
Abstract (sommario):
In laminated flat braided composites there are no fibers through the thickness direction except at the edges due to the fiber continuity of the braiding technique. A delamination along the interlaminar planes can be propagated because of the lack of fibers in the Z- or third-direction to the composite. The delamination initiates essentially as a result of arising the stresses concentrations around the transverse or matrix cracks that appear due to the mismatch of the thermal expansion coefficients of the fibers and matrix during the fabrication process. The delamination renders low interlamina
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Askari, Davood, and Mehrdad N. Ghasemi-Nejhad. "Inter-Laminar Mechanical Properties Improvements in Carbon Nanotubes Reinforced Laminated Nanocomposites." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-64283.

Testo completo
Abstract (sommario):
Owing to their superior mechanical properties, carbon nanotubes (CNTs) can be used as an additional reinforcement to improve the mechanical properties of laminated composite materials. To incorporate the excellent properties of CNTs into the existing traditional composite technology, vertically aligned high density arrays of CNTs were grown perpendicular to the surface of 2-D woven cloths and tows of various fibrous materials. The nano-forest like structures of fabrics is used to fabricate 3-D reinforced nanocomposites. Due to the presence of aligned CNTs in through-the-thickness direction, it
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Maranon, Alejandro, Yan Sanabria, Mari´a F. Contreras, and Wilson Hormaza. "Impact Performance of Natural Fique-Fiber Reinforced Composites." In ASME 2008 International Mechanical Engineering Congress and Exposition. ASMEDC, 2008. http://dx.doi.org/10.1115/imece2008-67518.

Testo completo
Abstract (sommario):
Laminated composites made of natural fiber and polymeric resins have a strong potential for engineering applications as they offer an attractive combination of mechanical and physical properties together with their environmental friendly character. Among structural applications, hybrid ballistic systems made of natural fiber composites have attracted the attention of engineers and scientists because of their excellent energy absorption compared to mild steel. In this paper, the impact and tensile properties of fique fibers (fucraea) reinforced composites are investigated. Plain woven fique-fab
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Yu, Ying, Shinichiro Kawabata, Yuqiu Yang, and Hiroyuki Hamada. "Effect of Hot Water Immersion on the Mechanical Properties of Jute and Jute Hybrid Reinforced Composites." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-62823.

Testo completo
Abstract (sommario):
As well known, the corrosion resistance and durability of the material are always considered in the safety design of the materials. In this study, the jute fabric from recycled coffee bags was used to fabricate ecologically friendly composites. Jute fabrics with two kinds of different moisture contents were used to fabricate the natural fiber reinforced composites, and the hot water immersion properties have been evaluated. Additionally, the effects of the hybridization with glass woven fabric laminated structures were also investigated. Jute/Jute laminated composite, Jute/Jute/Glass, and Glas
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Tang, Wenzhong, and Michael Keefe. "Stress Analyses and Structural Modifications of Fabric Composite Seams." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-39487.

Testo completo
Abstract (sommario):
An adhesively bonded seam is a common method of joining coated fabrics in the manufacturing of inflatables. In this paper, Nylon and Polyester seams are studied both experimentally and numerically. In the numerical analyses, the seam components are described with layered models containing fabric composite layers. The in-plane and out-of-plane elastic constants of the fabric composite layers are derived using the crimp model and a stacked model respectively. An existing finite element code, ANSYS 5.7 is used to perform two-dimensional stress analyses of the seams under tension. In the analyses,
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Jung, Seung-Yoon, and Kyung-Wook Paik. "Effects of the Adhesion Strength on the Bending Fatigue Behavior of Cu Pattern Laminated Fabrics Using B-Stage Non-Conductive Films (NCFs)." In 2018 IEEE 68th Electronic Components and Technology Conference (ECTC). IEEE, 2018. http://dx.doi.org/10.1109/ectc.2018.00346.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Laminated fabrics"

1

Guess, T. R., E. D. Jr Reedy, and M. E. Stavig. Characterization of E-glass/polyester woven fabric composite laminates and tubes. Office of Scientific and Technical Information (OSTI), December 1995. http://dx.doi.org/10.2172/203488.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Wang, Timothy W., and Frank D. Blum. Interfacial Mobility and Its Effect on Flexural Strength and Fracture Toughness in Glass-Fiber Fabric Reinforced Epoxy Laminates. Fort Belvoir, VA: Defense Technical Information Center, November 1994. http://dx.doi.org/10.21236/ada288344.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!