Libri sul tema "Nickel alloys"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 libri per l'attività di ricerca sul tema "Nickel alloys".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi i libri di molte aree scientifiche e compila una bibliografia corretta.
Institute, Nickel, ed. Alloy selection for service in hydrogen fluoride, hydrofluoric acid and fluorine: A guide to the use of nickel-containing alloys. Nickel Institute, 2019.
Cerca il testo completo(Canada), Nickel Development Institute, ed. Nickel alloys for electronics. The Institute, 1987.
Cerca il testo completoInstitute, Nickel, ed. Guidelines for the welded fabrication of nickel alloys for corrosion-resistant service: A practical guide for welders, material engineers and design engineers. Nickel Institute, 2018.
Cerca il testo completoUlrich, Heubner, ed. Nickel alloys and high-alloy special stainless steels. Expert Verlag, 1987.
Cerca il testo completoUlrich, Heubner, ed. Nickel alloys and high-alloy special stainless steels. 2nd ed. Expert Verlag, 1998.
Cerca il testo completoIsleib, C. R. Nickel alloys in today's electronics industry. Nickel Development Institute, 1987.
Cerca il testo completoR, Davis J., and ASM International. Handbook Committee., eds. Nickel, cobalt, and their alloys. ASM International, 2000.
Cerca il testo completoAllison, J. E. Fe-Ni-Cr alloys for coatings and electroforms. U.S. Dept. of the Interior, Bureau of Mines, 1989.
Cerca il testo completoAllison, J. E. Fe-Ni-Cr alloys for coatings and electroforms. Dept. of the Interior, 1989.
Cerca il testo completoGendron, T. S. Irreversible embrittlement of alloy 600 in hydrogenated steam at 400 [degrees] C. System Chemistry and Corrosion Branch, Chalk River Laboratories, 1994.
Cerca il testo completoRahoi, Dennis W. Alloy 400 for use in high pressure feedwater heaters. Nickel Development Institute, 1993.
Cerca il testo completoMwansa, Emmanuel. The electrodeposition of nickel-molybdenum alloys. University of Birmingham, 1989.
Cerca il testo completo1949-, Nash P., and ASM International, eds. Phase diagrams of binary nickel alloys. ASM International, 1991.
Cerca il testo completoLippold, John C. Welding metallurgy and weldability of nickel-base alloys. John Wiley & Sons, 2009.
Cerca il testo completoUnited States. National Aeronautics and Space Administration., ed. The influence of chromium on structure and mechanical properties of B2 nickel aluminide alloys. National Aeronautics and Space Administration, 1992.
Cerca il testo completoUnited States. National Aeronautics and Space Administration., ed. The influence of chromium on structure and mechanical properties of B2 nickel aluminide alloys. National Aeronautics and Space Administration, 1992.
Cerca il testo completoUnited States. National Aeronautics and Space Administration., ed. Yielding and deformation behavior of the single crystal nickel-base superalloy PWA 1480. National Aeronautics and Space Administration, 1986.
Cerca il testo completoDoane, D. V. Modern carburized nickel alloy steels. Nickel Development Institute, 1990.
Cerca il testo completoUlʹi͡anin, E. A. Vysokolegirovannye korrozionnostoĭkie splavy. "Metallurgii͡a", 1987.
Cerca il testo completoEllis, David L. Hot corrosion of the B2 nickel aluminides. National Aeronautics and Space Administration, 1993.
Cerca il testo completoFarrar, J. C. M. The alloy tree: A guide to low-alloy steels, stainless steels and nickel-base alloys. Woodhead, 2004.
Cerca il testo completoStephen, Lamb, and Bringas John E. 1953-, eds. CASTI handbook of stainless steels & nickel alloys. 2nd ed. CASTI Pub., 2002.
Cerca il testo completoauthor, Giler Roger, and Nickel Development Institute (Canada), eds. Nickel-chromium alloys for electric resistance heating. Nickel Development Institute, 1990.
Cerca il testo completoGreaves, Mark Stephen. Directional recrystallisation of wrought nickel base alloys. University of Birmingham, 1992.
Cerca il testo completo1953-, Bringas John E., and Lamb Stephen, eds. CASTI handbook of stainless steels & nickel alloys. CASTI Publishing Ic., 1999.
Cerca il testo completoCenter, NASA Glenn Research, ed. Dual microstructure heat treatment of a nickel-base disk alloy. National Aeronautics and Space Administration, Glenn Research Center, 2001.
Cerca il testo completoAvery, Richard E. Nickel-containing materials for water control applications. Nickel Development Institute, 1993.
Cerca il testo completoD, Aggarwal M., and George C. Marshall Space Flight Center., eds. A study of microstructural characteristics of Ni-based superalloys at high temperatures: Final technical report. Dept. of Physics, Alabama Agricultural and Mechanical University, 1990.
Cerca il testo completoD, Aggarwal M., and United States. National Aeronautics and Space Administration, eds. A study of microstructural characteristics of Ni-based superalloys at high temperatures: Semi-annual technical report. Dept. of Physics, Alabama Agricultural and Mechanical University, 1987.
Cerca il testo completoUnited States. National Aeronautics and Space Administration., ed. A Study of microstructural characteristics of Ni-based superalloys at high temperatures: Semi-annual technical report. Dept. of Physics, Alabama Agricultural and Mechanical University, 1988.
Cerca il testo completoSreeramesh, Kalluri, McGaw Michael A, and United States. National Aeronautics and Space Administration., eds. The influence of primary and secondary orientations on the elastic response of a nickel-base single-crystal superalloy. National Aeronautics and Space Administration, 1993.
Cerca il testo completoUnited States. National Aeronautics and Space Administration., ed. Electron diffraction evidence for the ordering of excess nickel atoms by relation to stoichiometry in nickel-rich B'-NiAl formation of a nickel-aluminum (Ni2Al) superlattice. National Aeronautics and Space Administration, 1988.
Cerca il testo completoHarrington, Jonathan D. Nickel stainless steels and high-nickel alloys for flue gas desulfurizsation systems. Nickel Development Institute, 1987.
Cerca il testo completoHarrington, Jonathan D. Nickel stainless steels and high-nickel alloys for flue gas desulfurizsation systems. The Institute, 1987.
Cerca il testo completoFairhurst, S. The toxicity of nickel and its inorganic compounds. H.M.S.O., 1987.
Cerca il testo completoR, Bowman R., Nathal Michael V, and United States. National Aeronautics and Space Administration. Scientific and Technical Information Program., eds. Physical and mechanical metallurgy of NiAl. National Aeronautics and Space Administration, Office of Management, Scientific and Technical Information Program, 1994.
Cerca il testo completoBransford, J. W. Ignition characteristics of the nickel-based alloy UNS N07001 in pressurized oxygen. U.S. Dept. of Commerce, National Institute of Standards and Technology, 1990.
Cerca il testo completoYoshiki-Gravelsins, Karen S. The Thermodynamic properties of Ni-Fe-S-O melts. University of Toronto, 1988.
Cerca il testo completoGi͡unter, V. Ė. Nikelid titana: Medit͡sinskiĭ material novogo pokolenii͡a. NII medit͡sinskikh materialov i implantatov s pami͡atʹi͡u formy Sibirskogo fiziko-tekhnicheskogo instituta pri Tomskom gos. universitete, 2006.
Cerca il testo completoGérard, Béranger, ed. The iron-nickel alloys: A hundred years after the discovery of invar--. Intercept Ltd., 1996.
Cerca il testo completoW, Bransford J., and National Institute of Standards and Technology (U.S.), eds. Ignition characteristics of the nickel-based alloy UNS N07718 in pressurized oxygen. U.S. Dept. of Commerce, National Institute of Standards and Technology, 1989.
Cerca il testo completoJames, William F. Mechanical properties of inconel 718 and nickel 201 alloys after thermal histories simulating brazing and high temperature service. National Aeronautics and Space Administration, Langley Research Center, 1985.
Cerca il testo completoBerkovits, Avraham. Modelling fatigue damage accumulation in nickel base superalloys: Final report. Technion-Israel Institute of Technology, Faculty of Aerospace Engineering, 1992.
Cerca il testo completoInstitute, Nickel, ed. Alloy selection for service in sulphuric acid: A guide to the use of nickel-containing alloys. Nickel Institute, 2019.
Cerca il testo completoKhoperia, Teimuraz N. Electroless deposition of metals and alloys for new challenges in nanotechnology, electronics and catalysis. Nova Science Publishers, Inc., 2013.
Cerca il testo completoAmerican Welding Society. Committee on Filler Metals and Allied Materials., American Welding Society. Technical Activities Committee., American Welding Society, and American National Standards Institute, eds. Specification for nickel and nickel-alloy bare welding electrodes and rods. American Welding Society, 2005.
Cerca il testo completoDuncan, Adrian. Cracking in the welding of cupro-nickel alloys. University of Aston. Department of Mechanical and Production Engineering, 1985.
Cerca il testo completoUlʹi͡anin, E. A. Korrozionnostoĭkie splavy na osnove zheleza i nikeli͡a. "Metallurgii͡a", 1986.
Cerca il testo completoSymposium on Advanced Technologies for Superalloy Affordability (2000 Nashville, Tenn.). Advanced technologies for superalloy affordability: Proceedings of a symposium. TMS, 2000.
Cerca il testo completo