Bibliografie tematiche / Product life cycle - Environmental aspects

Indice

Articoli di riviste
Tesi
Libri
Capitoli di libri
Atti di convegni
Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Product life cycle - Environmental aspects"

Autore: Grafiati

Pubblicato: 4 giugno 2021

Ultima modifica: 6 settembre 2023

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Product life cycle - Environmental aspects".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Product life cycle - Environmental aspects"

Bi, Yan Gang, and Chun Li Liu. "The Sustainable Design of Product Life Cycle." Advanced Materials Research 962-965 (June 2014): 1572–77. http://dx.doi.org/10.4028/www.scientific.net/amr.962-965.1572.

Testo completo

Abstract (sommario):

To reduce products’ negative impact on environment, save resources and energy, and recycle materials scientifically and effectively. We use "the sustainable design of product life cycle",it is a design concept. Its guide is prevention in advance, and its basic demands are low-carbon, green, energy conservation and environmental protection. It focuses on the technology in the aspects of design, materials, structure, crafts, circulation, recycling and so on. Its goal is to satisfy the demand of human and develop sustainably at the same time.

Gli stili APA, Harvard, Vancouver, ISO e altri

Mahmood, Salwa, Mohd Fahrul Hassan, Abdul Rahman Hemdi, and Muhamad Zameri Mat Saman. "Sustainability in the Product Design: A Review of Recent Development Based on LCA." International Journal of Engineering & Technology 7, no. 3.7 (July 4, 2018): 54. http://dx.doi.org/10.14419/ijet.v7i3.7.16208.

Testo completo

Abstract (sommario):

In order to achieve sustainable product design process, aspects such of environmental, economic and social should be balanced. This paper discussed on sustainability of product design, conceptual basis of life cycle assessment (LCA), review of LCA at several product design, methodology of proposed framework and discussion on strengths and limitations of LCA. This paper proposed to develop a framework for improving the product design process based on LCA tool. The aims is to calculate potential impact of environment, economic and social aspects during product design process. For environmental a

Gli stili APA, Harvard, Vancouver, ISO e altri

Tellnes, Lars G. F., Gry Alfredsen, Per Otto Flæte, and Lone Ross Gobakken. "Effect of service life aspects on carbon footprint: a comparison of wood decking products." Holzforschung 74, no. 4 (March 26, 2020): 426–33. http://dx.doi.org/10.1515/hf-2019-0055.

Testo completo

Abstract (sommario):

AbstractCarbon footprint over the life cycle is one of the most common environmental performance indicators. In recent years, several wood material producers have published environmental product declarations (EPDs) according to the EN 15804, which makes it possible to compare the carbon footprint of product alternatives. The objective of this study was to investigate the effect of service life aspects by comparing the carbon footprint of treated wood decking products with similar performance expectations. The results showed that the modified wood products had substantially larger carbon footpr

Gli stili APA, Harvard, Vancouver, ISO e altri

Diekel, Felice, Natalia Mikosch, Vanessa Bach, and Matthias Finkbeiner. "Life Cycle Based Comparison of Textile Ecolabels." Sustainability 13, no. 4 (February 6, 2021): 1751. http://dx.doi.org/10.3390/su13041751.

Testo completo

Abstract (sommario):

Environmental impacts of textile production increased over the last decades. This also led to an increasing demand for sustainable textiles and ecolabels, which intend to provide information on environmental aspects of textiles for the consumer. The goal of the paper is to assess selected labels with regard to their strengths and weaknesses, as well as their coverage of relevant environmental aspects over the life cycle of textiles. We applied a characterization scheme to analyse seven selected labels (Blue Angel Textiles, bluesign®, Cotton made in Africa (CMiA), Cradle to Cradle CertifiedTM,

Gli stili APA, Harvard, Vancouver, ISO e altri

Gukasova, A. E., and S. P. Kiseleva. "TRANSFORMATION OF PUBLIC PROCUREMENT OF INDUSTRIAL PRODUCTS TAKING INTO ACCOUNT THE ENVIRONMENTAL FACTOR." Vestnik Universiteta, no. 7 (September 7, 2020): 76–82. http://dx.doi.org/10.26425/1816-4277-2020-7-76-82.

Testo completo

Abstract (sommario):

Actual problems of industry and environmental aspects of their manifestation have been designated. To reduce the negative impact of industry on the environment, the authors suggest using public procurement tools. The main measures carried out by the state in the interests of ensuring environmental-oriented purchases of industrial products have been given. It has been proposed to expand the practice of using life-cycle contracts as the main way of state support for environmental-oriented procurement, which will subsequently allow you to use effectively available resources, taking into account t

Gli stili APA, Harvard, Vancouver, ISO e altri

Kovačič Lukman, Rebeka, Vasja Omahne, and Damjan Krajnc. "Sustainability Assessment with Integrated Circular Economy Principles: A Toy Case Study." Sustainability 13, no. 7 (March 31, 2021): 3856. http://dx.doi.org/10.3390/su13073856.

Testo completo

Abstract (sommario):

When considering the sustainability of production processes, research studies usually emphasise environmental impacts and do not adequately address economic and social impacts. Toy production is no exception when it comes to assessing sustainability. Previous research on toys has focused solely on assessing environmental aspects and neglected social and economic aspects. This paper presents a sustainability assessment of a toy using environmental life cycle assessment, life cycle costing, and social life cycle assessment. We conducted an inventory analysis and sustainability impact assessment

Gli stili APA, Harvard, Vancouver, ISO e altri

Dwi Astuti, Arieyanti, Rahayu Siwi Dwi Astuti, and Hadiyanto Hadiyanto. "Application of Life Cycle Assessment (LCA) in Sugar Industries." E3S Web of Conferences 31 (2018): 04011. http://dx.doi.org/10.1051/e3sconf/20183104011.

Testo completo

Abstract (sommario):

Sugar is one of the main commodities that are needed for human life. The demand of sugar is very high with the trend increase from year to year. This condition makes the sugar industry become a leading industry that must be maintained sustainability. The sustainability of the sugar industry is influenced by the use of energy and natural resources and the resulting environmental impacts. Therefore, an effort is needed to analyze the environmental aspects and potential environmental impacts resulting from a product (sugar), by using Life Cycle Assessment (LCA). LCA is a very important tool for t

Gli stili APA, Harvard, Vancouver, ISO e altri

Van Rensburg, Melissa L., S’phumelele L. Nkomo, and Ntandoyenkosi M. Mkhize. "Life cycle and End-of-Life management options in the footwear industry: A review." Waste Management & Research 38, no. 6 (March 17, 2020): 599–613. http://dx.doi.org/10.1177/0734242x20908938.

Testo completo

Abstract (sommario):

It is well recognized globally that the footwear industry contributes to a large waste stream throughout its life cycle. This article reviews the literature pertaining to the life cycle of footwear products and their End-of-Life (EoL) management strategies. The review discusses critical aspects of the footwear industry, commencing with a background on the growth and consumption of footwear products across the globe. The review provides an overview of the environmental impacts of different footwear materials across their life cycles. In this regard, leather materials are given intense focus due

Gli stili APA, Harvard, Vancouver, ISO e altri

Vetrova, Maria, and Dinara Ivanova. "Closed Product Life Cycle as a Basis of the Circular Economy." GATR Journal of Business and Economics Review (GATR-JBER) VOL. 5 (4) JAN-MAR. 2021 5, no. 4 (March 13, 2021): 36–50. http://dx.doi.org/10.35609/jber.2021.5.4(4).

Testo completo

Abstract (sommario):

Objective – The circular economy aims to preserve the value of products and materials within a closed supply chain. The existing models and decision-making methods for managing the end of the product life cycle are mostly focused on the economic aspects. While the circular economy is aimed at combining environmental, economic and social goals. This article aims to develop a model for enterprise decision-making on the disposal of used products, taking into account socio-environmental and economic factors. Methodology/Technique – The article analyzes the impact of digital technologies on the for

Gli stili APA, Harvard, Vancouver, ISO e altri

Briem, Ann-Kathrin, Thomas Betten, and Daniel Wehner. "Personalized Life Cycle Assessment – Reflecting Individuality within the Methodological Framework." Matériaux & Techniques 107, no. 5 (2019): 507. http://dx.doi.org/10.1051/mattech/2019030.

Testo completo

Abstract (sommario):

Growing environmental awareness in society increasingly influences individual everyday decisions, such as which product to buy or how to sustainably use it. Yet, available information to support these decisions is often limited, or difficult to understand particularly regarding sustainability. Effective ways of communicating environmental impacts of individual decisions are required to close this gap. While Life Cycle Assessment (LCA) is an established tool to evaluate environmental impacts of products and services and support environmental decision-making, the results are typically standardiz

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Product life cycle - Environmental aspects"

Yu, Chuan, and 余川. "Life cycle analysis of different feedstocks of biodiesel production." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2012. http://hub.hku.hk/bib/B49618027.

Testo completo

Abstract (sommario):

The scarcity of fossil fuel and its environmental impact have shifted the world focus on green innovations At a time when the use of fossil fuel means increasing energy scarcity and an environmental crisis in the world in which we live, we need green innovations now more than ever. Growing attention has been drawn to the use of biofuels, such as bioethanol and biodiesel, which have gradually come to make up part of the total energy supply. Uncertainties about the environmental and ecological aspects of the production and consumption of biofuel still exist despite its rapid development. A life

Gli stili APA, Harvard, Vancouver, ISO e altri

Emblemsvåg, Jan. "Activity-based life-cycle assessments in design and management." Diss., Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/32855.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Chan, Wah-man, and 陳華民. "Application of life cycle analysis (LCA) to consumer product development." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2002. http://hub.hku.hk/bib/B31255140.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Pope, Stephen Michael. "Designing for technology obsolescence through closing the product life cycle : an investigation and evaluation of three successional audio-video products." Thesis, Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/23138.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Newcomb, Patrick James. "Implications of modularity on product design for the life cycle." Thesis, Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/17593.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Yiu, W. Y., and 姚泳儀. "Life cycle assessment in the construction industry." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2001. http://hub.hku.hk/bib/B42576039.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Muir, Michael Christopher. "Lifecycle Assessment for Strategic Product Design and Management." Thesis, Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/19878.

Testo completo

Abstract (sommario):

With the advent of digital imaging technology, the options available to consumers in consumer imaging have increased tremendously. From image capture through image processing and output, many options have emerged; however, the relative environmental impacts of these different options are not clear cut. Simplistically, one might say that the use of a digital camera has a lesser environmental burden than the use of a reloadable film camera because the image produced as a result of using the digital camera avoids chemicals in film developing. However, digital cameras require electronics and compu

Gli stili APA, Harvard, Vancouver, ISO e altri

Choi, Wing-Kei, and 蔡穎琪. "Environmental life-cycle assessment of viaduct construction in Hong Kong." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2004. http://hub.hku.hk/bib/B31255814.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Chang, Chi-wai, and 鄭志偉. "Sustainability of products: frameworks reviewand case study." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2012. http://hub.hku.hk/bib/B48542830.

Testo completo

Abstract (sommario):

Sustainability is a hot topic for years and sustainability assessment has been generally used as an approach to assess the level of sustainability. For the effect of general products to the development of sustainability, there are existing assessment frameworks in use. However, they are either environmental-focused, or relied mainly on life cycle assessment approach, which has many deficiencies especially in the social aspect. In this paper, history of development of sustainability and relevant principles related to sustainability are extensively reviewed. Those relevant in the context of pro

Gli stili APA, Harvard, Vancouver, ISO e altri

Joshi, Surabhi. "Guidelines to integrate life cycle assessment in building design." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/31791.

Testo completo

Abstract (sommario):

Thesis (M. S.)--Architecture, Georgia Institute of Technology, 2010.<br>Committee Chair: Augenbroe, Godfried; Committee Member: Bayer, Charlene; Committee Member: Gentry, Russell. Part of the SMARTech Electronic Thesis and Dissertation Collection.

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Libri sul tema "Product life cycle - Environmental aspects"

Environmental life cycle analysis. Boca Raton: Lewis Publishers, 1997.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Ministers, Nordic Council of, ed. Product life cycle assessments: Principles and methodology. Copenhagen: Nordic Council of Ministers, 1992.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Streamlined life-cycle assessment. Upper Saddle River, NJ: Prentice Hall, 1998.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

1964-, Schaltegger S., and Braunschweig Arthur 1959-, eds. Life cycle assessment (LCA)--quo vadis? Basel: Birkhäuser, 1996.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

H. A. Udo de Haes. Life-cycle impact assessment: Striving towards best practice. Pensacola, FL: Society of Environment Toxicology and Chemistry, 2002.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Wenzel, Henrik. Environmental assessment of products. London: Chapman & Hall, 1997.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Beaufort-Langeveld, Angeline S. H. de 1947- and SETAC (Society), eds. Code of life-cycle inventory practice. Pensacola, Fla: Society of Environmental Toxicology and Chemistry, 2003.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Ayres, Robert U. Life cycle analysis and materials/energy forecasting models. Fontainebleau: INSEAD, 1993.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Ayres, Robert U. Life cycle analysis and materials/energy forecasting models. Fontainebleau: INSEAD, 1993.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

England), Textile Institute (Manchester, ed. Sustainable textiles: Life cycle and environmental impact. Boca Raton, FL: CRC Press, 2009.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Capitoli di libri sul tema "Product life cycle - Environmental aspects"

Ritzén, S., J. Bäckmar, and M. Norell. "Product development - integration of environmental aspects." In Life Cycle Networks, 152–62. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6381-5_13.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Frei, M., and R. Züst. "The Eco-effective Product Design - The Systematic Inclusion of Environmental Aspects in Defining Requirements." In Life Cycle Networks, 163–73. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6381-5_14.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Schischke, Karsten, Marina Proske, Rainer Pamminger, Sebastian Glaser, Nils F. Nissen, and Martin Schneider-Ramelow. "The “Environmental Activation Energy” of Modularity and Conditions for an Environmental Payback." In Towards a Sustainable Future - Life Cycle Management, 15–25. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-77127-0_2.

Testo completo

Abstract (sommario):

AbstractSimilar to the meaning of “activation energy” in physics and chemistry, there is a certain environmental investment needed for some circular design approaches: On the example of modular mobile devices, the additional environmental impact of implementing “modularity” is explained. This additional impact can be overcompensated through lifetime extension effects, if the design and related business models trigger the intended circularity effect. The paper systematically categorizes the different variants of modularity, explained on the example of smartphones. Each modularity approach features specific circularity aspects, including repair, upgrade, customization as a means to not over-spec a product, reuse and repurposing of modules. These life cycle management aspects are discussed on the example of various smart mobile products.

Gli stili APA, Harvard, Vancouver, ISO e altri

Fet, Annik Magerholm, Luitzen de Boer, and Martina Keitsch. "Looking Beyond the Factory Gates: Life Cycle Assessment, Supply Chain Management and Design for Environment." In Business Transitions: A Path to Sustainability, 45–56. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-22245-0_5.

Testo completo

Abstract (sommario):

AbstractThis chapter gives an overview of the principles of life cycle assessment (LCA), supply chain management (SCM) and design for the environment (DfE). They are all placed at Level 2 in the CapSEM Model as tools for enhancing the product by improving the actual production processes that take place at different stages and subsystems in the life cycle of a product. One way of analysing and ameliorating the environmental performance of a product can be by analysing the environmental aspects and impacts initially by performing a life cycle assessment aimed at finding the most significant environmental impacts in the life cycle of the product. These hotspots can then be identified under different suppliers in the upstream value chain. Results from this analysis should then be addressed in the design of a new product, and further result in changes to the supply chain by supply chain management. An optimal solution for improving the environmental impacts at the different stages of the life cycle of a product, can be achieved at the end by introducing this into design principles as better specification of the performance at each stage in the life cycle of the product. This chapter also introduces green public procurement as a driver for change in the supply chain.

Gli stili APA, Harvard, Vancouver, ISO e altri

Brunnhuber, Nadine, Andreas Windsperger, Enrique Alejandro Perdomo Echenique, and Franziska Hesser. "Implementing Ecodesign During Product Development: An Ex-Ante Life Cycle Assessment of Wood-Plastic Composites." In Sustainable Production, Life Cycle Engineering and Management, 23–40. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-29294-1_3.

Testo completo

Abstract (sommario):

AbstractAbout 80% of environmental performance is determined during product development. This study assesses environmental impacts of wood-plastic composite (WPC) boards still in development, to identify impact hot spots and improvement potentials. A seven-step approach to ecodesign implementation was used. It identifies environmental impacts and derives improvement strategies. A life cycle assessment (LCA) according to ISO 14040 was conducted to quantify potential environmental impacts. The WPC boards are made of PVC and wood flour. Impacts mostly result from PVC and electricity consumption for production. Thus, this study proposes replacing PVC with polylactic acid (PLA). Further improvement strategies are increasing material efficiency, energy efficiency, renewable electricity use and secondary plastic input. Increased end of life recycling reduces environmental impacts, compared to incineration only. These changes reduce the initial climate change results of 145 kg CO2 eq by 55%. Thus, early consideration of environmental aspects supports sustainable product development.

Gli stili APA, Harvard, Vancouver, ISO e altri

Groiß-Fürtner, Daniela, Claudia Mair-Bauernfeind, and Franziska Hesser. "Proposing a Multi-level Assessment Framework for Social LCA and Its Contribution to the Sustainable Development Goals." In Sustainable Production, Life Cycle Engineering and Management, 103–29. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-29294-1_7.

Testo completo

Abstract (sommario):

AbstractIn the context of sustainable product development, Life Cycle Assessment (LCA) methods are used to gain knowledge about environmental hotspots and derive options for improvement. In light of international efforts to promote sustainable development, Social LCA (SLCA) is an emerging method to assess potential socio-economic impacts of products and services. Even when available data is limited in the early stages of materials, process, and product development, the implementation of SLCA benefits target-oriented research and development to support sustainable development. This article introduces a multi-level SCLA framework for accompanying innovation processes. The multi-level framework starts by prioritizing social aspects and proceeds as more and more data becomes available with generic and primary assessments and sets the results in context to the 17 Sustainable Development Goals (SDGs). The application of the multi-level SLCA is showcased via a bio-based value chain. The study aims to identify options for social risk reduction and consequently provide recommendations for decision-makers. The results show that options to increase social sustainability can be realized by reducing chemical and fertilizer use or fostering sustainability reporting. By mapping the SLCA results to the SDGs, it could be found that the bio-based value chain at hand mostly contributes to the SDG no. 8.

Gli stili APA, Harvard, Vancouver, ISO e altri

Muñoz López, Natalia, José Luis Santolaya Sáenz, and Anna Biedermann. "Methodology of Product Sustainable Redesign. Case Study: Furniture of a Clothing Retail Store." In Lecture Notes in Mechanical Engineering, 175–81. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70566-4_28.

Testo completo

Abstract (sommario):

AbstractCompanies awareness of the impact generated by its products increases and motivates them to develop initiatives to improve their sustainability. In this work, a methodology consisting of three main phases: sustainability assessment, redesign process and comparison of designs, is proposed to obtain more sustainable product designs. Methodology is based on the Life Cycle Sustainability Assessment (LCSA) approach, which is applied to simultaneously evaluate environmental, economic and social aspects. In the case study the sustainability improvement of the furniture of a clothing retail store is addressed. A set of indicators are considered to evaluate the sustainability performance of both initial design and redesign. The study concludes that the application of different sustainability strategies allows a significant enhancement of the environmental and economic indicators.

Gli stili APA, Harvard, Vancouver, ISO e altri

Keivanpour, Samira. "A Fuzzy Sustainable Quality Function Deployment Approach to Design for Disassembly with Industry 4.0 Technologies Enablers." In Lecture Notes in Mechanical Engineering, 772–80. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-28839-5_86.

Testo completo

Abstract (sommario):

AbstractIntegrating sustainability into product design is a proactive circular economy practice and design for disassembly is an essential eco-design practice for complex product manufacturers. Today, industry 4.0 technologies have considerable influence on product life cycle management, and a few studies address the contributions of these technologies to eco-design methods. Designing the appropriate eco-design tool is challenging considering the complexity of products, organizational instruments, the need for integrating diverse databases, customization of the tool, and incorporating the strategic goals. Hence, a systematic approach is required to address the implications of innovative technologies and integrate the different technical, economic, environmental, and social aspects into the design stage. Quality function deployment (QFD) is an effective approach to integrating customers, technical, and business requirements into new product development. Fuzzy Sustainable QFD is an extended version of this method for considering three pillars of sustainability in design and dealing with qualitative linguistic judgments. This paper proposes a Fuzzy sustainable QFD approach to design for disassembly. A numerical example illustrates the application of the proposed method.

Gli stili APA, Harvard, Vancouver, ISO e altri

Bay, Christian, Niko Nagengast, Hans-Werner Schmidt, Frank Döpper, and Christian Neuber. "Environmental Assessment of Recycled Petroleum and Bio Based Additively Manufactured Parts via LCA." In Lecture Notes in Mechanical Engineering, 669–77. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-28839-5_75.

Testo completo

Abstract (sommario):

AbstractAdditive Manufacturing (AM) as much as sustainability aspects gained increasing attention in the last couple of years. The vision of resource-efficient manufacturing at batch size one is often claimed as an outstanding property of AM. Fused Filament Fabrication, as one of the most used AM technologies, satisfies this statement only in a restricted sense, through simple handling for non-experts and low-cost materials and machines. Next to performance-driven and process-influencing attributes, the question of a general ecological improvement through thermo-mechanical recycling rises. Therefore, recycling options of the thermoplastics are mandatory to explore. Based on the ISO 14040/44 Life Cycle Assessment (LCA) methodology two different geometries were environmentally assessed during a primary process cycle, using, and recycling. Each geometry was manufactured by a bio-based polymer and internationally produced (PLA) and petroleum-based locally produced polymer (PP) with a corresponding support filament. The methodological approach demonstrates an option how to evaluate the field of AM and recycling regarding environmental aspects. Furthermore, an adaption of the sensitivity towards industrial parameters (material/energy efficiency) showed an ecological benefit concerning recycling.

Gli stili APA, Harvard, Vancouver, ISO e altri

de Winter, A., and J. A. G. Kals. "Environmental Aspects of Sheet Metal Forming." In Life Cycle Networks, 188–200. Boston, MA: Springer US, 1997. http://dx.doi.org/10.1007/978-1-4615-6381-5_16.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Product life cycle - Environmental aspects"

Choi, Jun-Ki, and Karthik Ramani. "An Integrated Decision Analysis for the Sustainable Product Design." In ASME 2008 International Manufacturing Science and Engineering Conference collocated with the 3rd JSME/ASME International Conference on Materials and Processing. ASMEDC, 2008. http://dx.doi.org/10.1115/msec_icmp2008-72029.

Testo completo

Abstract (sommario):

Engineering designers consider many aspects surrounding a product’s life in order to meet safety, reliability, quality, manufacturing, and cost requirements. Most of the time this is done in an excellent way and the resulting products offers broad functionality with high quality and reasonable price. However serious considerations of integration of environmental requirements are often missed in the product development process. All products contribute to a range of environmental problems. These problems arise through the entire life cycle of products from the creation to the disposal of product

Gli stili APA, Harvard, Vancouver, ISO e altri

Newcomb, Patrick J., Bert Bras, and David W. Rosen. "Implications of Modularity on Product Design for the Life Cycle." In ASME 1996 Design Engineering Technical Conferences and Computers in Engineering Conference. American Society of Mechanical Engineers, 1996. http://dx.doi.org/10.1115/96-detc/dtm-1516.

Testo completo

Abstract (sommario):

Abstract Growing concern for the environment has spurred interest in environmentally conscious design and manufacturing. The concept of Design for the Life Cycle encompasses all aspects of a product’s life cycle from initial conceptual design, through normal product use, to the eventual disposal of the product. A product’s architecture, determined during the configuration design stage, plays a large role in determining the product’s life cycle characteristics. In this paper, modularity of product architectures with respect to life cycle concerns, not just product functionality and structure, i

Gli stili APA, Harvard, Vancouver, ISO e altri

Michalek, Jeremy J., Chris T. Hendrickson, and Jonathan Cagan. "Using Economic Input-Output Life Cycle Assessment to Guide Sustainable Design." In ASME 2011 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2011. http://dx.doi.org/10.1115/detc2011-47664.

Testo completo

Abstract (sommario):

Successful design for the environment (DfE) requires the designer to understand the life cycle impact of design decisions. However, estimating life cycle implications of design choices using traditional process-based life cycle assessment (LCA) is typically too time- and resource-intensive to be practical as part of the design process. We examine the use of economic input-output life cycle assessment (EIO-LCA) as a tool to support sustainable design by helping the designer to quickly determine which aspects of the product dominate its lifetime emissions. Compared to traditional process-based L

Gli stili APA, Harvard, Vancouver, ISO e altri

Serra, Angela, Sergio Gandini, Simone Colantoni, Giulio Buia, Luca Fantaccione, Pietro Bartocci, and Francesco Fantozzi. "Additive Manufacturing Versus Investment Casting for a Gas Turbine Component: a Social Life Cycle Comparison." In ASME Turbo Expo 2022: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/gt2022-77981.

Testo completo

Abstract (sommario):

Abstract Currently the Energy Industry and Industrial Power Plants are committed to support sustainable development balancing environmental, economic, and social benefits. As the first two aspects are fully covered by environmental lifecycle assessment and life cycle costing, the third one is covered only for the portion regarding human health while other aspects, like local employment, contribution to economic development, supplier’s relationship, are not so easy to be measured. Social life cycle assessment (S-LCA) is considered a powerful tool to measure and improve a company’s sustainabilit

Gli stili APA, Harvard, Vancouver, ISO e altri

Yang, Dongfang. "The application of Life Cycle Assessment in sustainable furniture system design." In 13th International Conference on Applied Human Factors and Ergonomics (AHFE 2022). AHFE International, 2022. http://dx.doi.org/10.54941/ahfe1001987.

Testo completo

Abstract (sommario):

Life Cycle Assessment (LCA) is a quantitative methodology to assess the environmental impacts of products, services, and systems. Considering the sustainable furniture production and consumption system is one of the challenges that should be addressed and improved for a better quality of life for residents and lower pollution levels for the environment. The International Reference Life Cycle Data System (ILCD) Handbook by the European Commission has defined 23 LCA applications within which developing design strategies is one. Considering 80% of environmental impacts are decided in the design s

Gli stili APA, Harvard, Vancouver, ISO e altri

Walters, Justin, and Amin Mirkouei. "Social Life Cycle Assessment of Computer-Aided Design Tools." In ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/detc2020-22576.

Testo completo

Abstract (sommario):

Abstract Social life cycle assessment (SLCA) is a newly developed concept that is used to assess the potential positive and negative social impacts of products and services. However, the existing approaches have not focused on improving social aspects in the execution of computer-aided design (CAD) software. The Idaho National Laboratory’s Materials and Fuels Complex is currently using Creo Parametric CAD software to design all experimental equipment. The purpose of this study is to conduct a socio-environmental life cycle assessment on the existing design procedures and present the findings a

Gli stili APA, Harvard, Vancouver, ISO e altri

Eastwood, Michael D., Karl R. Haapala, Matthew D. Carter, and Paul W. Liner. "Product and Process Design for Sustainable Assembly." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-63272.

Testo completo

Abstract (sommario):

Abstract Design and manufacturing engineers often focus on technical performance and cost as primary factors in the design of components and assemblies. With a changing market and a growing list of regulations, however, manufacturing decision makers must address economic, environmental, and social aspects of sustainability in product design and manufacturing. Current methods and tools for conducting such sustainability assessments often consider corporate level metrics and lack the detail necessary to assist engineering decision making at the product and process level. A sustainability assessm

Gli stili APA, Harvard, Vancouver, ISO e altri

Germani, Michele, Marco Mandolini, Marco Marconi, Alessandro Morbidoni, and Marta Rossi. "Eco-Design Platform Within an Extended Enterprise: How to Implement It?" In ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/detc2014-34340.

Testo completo

Abstract (sommario):

Nowadays, the environmental issue has become increasingly important and has taken a leading role in the product design process. The product sustainability pass through the use of specific software tools supporting the design phase. Their integration, to build up a platform, is a key aspect toward the implementation of an effective eco-design approach. Even if the approaches presented in literature to create an eco-design platform aim to integrate environmental aspects during the design process, a proper tools integration is not existing. To overcome these limitations, the paper presents an eco

Gli stili APA, Harvard, Vancouver, ISO e altri

Musacchio, Alessandro, Andrea Corona, Luca Cencioni, Angela Serra, Pietro Bartocci, and Francesco Fantozzi. "Defining Key Environmental Performance Factors (KEPF) for Gas Turbines Eco-Design and Production Through Life Cycle Assessment." In ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/gt2020-15335.

Testo completo

Abstract (sommario):

Abstract Nowadays environmental impact assessment of a new product is necessary to meet rising sustainability requirements also in the Oil & Gas and Power Generation markets, especially for industrial gas turbines. From the conceptual phase to the detailed design, engineer’s work is supported by a wide range of tools aimed to define and evaluate typical parameters such as performances, life and costs, etc. However, considering environmental impact aspects from the early stages of product development may not be easy if the involved engineers are not provided by a specific Life Cycle Assessm

Gli stili APA, Harvard, Vancouver, ISO e altri

Kalyan-Seshu, Uma-Sankar, and Bert Bras. "Integrating DFX Tools With Computer-Aided Design Systems." In ASME 1998 Design Engineering Technical Conferences. American Society of Mechanical Engineers, 1998. http://dx.doi.org/10.1115/detc98/dac-5621.

Testo completo

Abstract (sommario):

Abstract The growing emphasis on environmentally conscious design and manufacturing approaches has placed new burdens on designers. The amount of information available to designers is of great significance in making life cycle assessments on a product. However, well-established commercial CAD systems do not provide means for evaluating most of the different life cycle aspects of the product being modeled. Hence there is a need to have a CAD-environment where the life cycle tools (DFX tools in this work) are integrated with these systems so that life cycle design is made possible. In the resear

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Product life cycle - Environmental aspects"

Lu, Bin, Bo Li, Xiaolong Song, and Jianxin Yang. Multi Life Cycle Assessment: A Potential Assessment Method for Product Lifespan and Environmental Performance. University of Limerick, 2021. http://dx.doi.org/10.31880/10344/10225.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

VanZomeren, Christine, Kevin Philley, Nia Hurst, and Jacob Berkowitz. Wildrice (Zizania palustris; Manoomin) biology, functions and values, and soil physiochemical properties affecting production : a review of available literature. Engineer Research and Development Center (U.S.), August 2023. http://dx.doi.org/10.21079/11681/47513.

Testo completo

Abstract (sommario):

Wildrice (Zizania palustris L.) is an annual aquatic emergent plant primarily distributed across portions of Minnesota, Wisconsin, Michigan, and Canada. Wildrice requires narrow environmental conditions that vary throughout its life cycle. Environmental conditions required include water levels between 15 and 90 cm, slow flowing water, anaerobic soil, and circum-neutral pH. Wildrice production and abundance is most often limited by nitrogen availability. Both short- and long-term changes in local conditions impact distribution and abundance of wildrice at local and regional scales. Reported dec

Gli stili APA, Harvard, Vancouver, ISO e altri

Nilsson Lewis, Astrid, Kaidi Kaaret, Eileen Torres Morales, Evelin Piirsalu, and Katarina Axelsson. Accelerating green public procurement for decarbonization of the construction and road transport sectors in the EU. Stockholm Environment Institute, February 2023. http://dx.doi.org/10.51414/sei2023.007.

Testo completo

Abstract (sommario):

Public procurement of goods and services contributes to about 15% of global greenhouse gas emissions. In the EU, public purchasing represents 15% of its GDP, acting as a major influencer on the market through the products and services acquired by governments from the local to national levels. The public sector has a role to play in leveraging this purchasing power to achieve the best societal value for money, particularly as we scramble to bend the curve of our planet’s warming. Globally, the construction and transport sectors each represent about 12% of government procurements’ GHG emissions.

Gli stili APA, Harvard, Vancouver, ISO e altri

PR-472-144505-R02 Development of Guidance on Subsea Launchers and Receivers. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), January 2016. http://dx.doi.org/10.55274/r0010035.

Testo completo

Abstract (sommario):

Various subsea pig launching and receiving systems have been designed and built, and some of these have seen actual usage offshore. However, subsea pig launching / receiving on pipeline systems that have been in service remains rare, and there are concerns in the industry regarding the safety, operational reliability, technical complexity and environmental impact of subsea pig launching / receiving. This may have a negative effect on overall integrity management and maintenance strategies for subsea pipeline systems, and thus may lead to greater likelihood of pipeline failures. As a minimum, i

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!