Accedi

Bibliografie tematiche / Production engineering / Articoli di riviste

Segui questo link per vedere altri tipi di pubblicazioni sul tema: Production engineering.

Articoli di riviste sul tema "Production engineering"

Autore: Grafiati

Pubblicato: 4 giugno 2021

Ultima modifica: 25 luglio 2025

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Production engineering".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.

1

Koščak Kolin, Sonja. "BOOK REVIEW "PETROLEUM PRODUCTION ENGINEERING"." Rudarsko-geološko-naftni zbornik 31, no. 1 (2016): 87–88. http://dx.doi.org/10.17794/rgn.2016.3.7.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Sinclair, Meeghan. "Engineering polyketide production." Nature Biotechnology 18, no. 9 (2000): 914. http://dx.doi.org/10.1038/79355.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

SHIOKAWA, Masao. "Future Production Engineering." Journal of the Society of Mechanical Engineers 88, no. 797 (1985): 406–11. http://dx.doi.org/10.1299/jsmemag.88.797_406.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Lambert, R. G. "Production engineering expands." Production Engineer 65, no. 9 (1986): 13. http://dx.doi.org/10.1049/tpe.1986.0206.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Chilingarian, George V. "Gas production engineering." Journal of Petroleum Science and Engineering 2, no. 1 (1989): 77. http://dx.doi.org/10.1016/0920-4105(89)90052-1.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Neugebauer, Reimund, Eberhard Kunke, Hans Bräunlich, and Angela Göschel. "Geometry-Flexible Production – a Production Engineering Challenge." Key Engineering Materials 344 (July 2007): 301–8. http://dx.doi.org/10.4028/www.scientific.net/kem.344.301.

Testo completo

Abstract (sommario):

Today's automotive manufacturers are required to meet ever greater demands for increased flexibility due to decreasing batch sizes. Solutions to meet these demands will bring about far-reaching changes to the mass productions methods which currently dominate automotive manufacturing. In addition to the current need for sheet metal components, such trends will also have an effect on assembly and joining techniques used. The paper describes the challenge for production engineering resulting from current and future market demands.

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Kováč, Jozef, and Vladimír Rudy. "Innovation production structures of small engineering production." Procedia Engineering 96 (2014): 252–56. http://dx.doi.org/10.1016/j.proeng.2014.12.151.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Santo, Victor Martins do Espirito, Fabio Hideki Fernandes Komyama, Felipe Kenzo Nonaka Ojima, and Renato Ferreira Abreu. "Affordable low cost filling machine for small producers." Núcleo do Conhecimento 06, no. 01 (2021): 96–127. https://doi.org/10.32749/nucleodoconhecimento.com.br/engineering-mechanical-engineering/low-cost-filling.

Testo completo

Abstract (sommario):

Currently, the beverage market is a branch in which big names establish themselves, and in this rigidity imposed by big brands, small brands see great difficulty in their insertion in the market, and even in classifying themselves as a particular competitor of such giants of the market. Marketplace. However, the cachaça branch, a genuinely Brazilian drink, shows itself to be contrary to this logic, with small producers dominating the market as pointed out by Pegn magazine. business plan * (2019). Aguardente 4 Pontes is an emerging company for the production of alcoholic cocktails, throu

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Lamb, Thomas. "Engineering for Ship Production." Journal of Ship Production 3, no. 04 (1987): 274–97. http://dx.doi.org/10.5957/jsp.1987.3.4.274.

Testo completo

Abstract (sommario):

Engineering for Ship Production is the use of production-oriented techniques to transmit and communicate design and engineering data to various users in a shipyard. The changeover from a traditional craft-organized shipyard to one of advanced technology has obviously had a tremendous effect on all shipyard departments. It should have had its second greatest impact on the engineering department. However, many engineering departments did not rise to this challenge and, therefore, lost what might have been a lead position for directing and controlling change. Production performance depends largel

Gli stili APA, Harvard, Vancouver, ISO e altri

10

NOGUCHI, Norihisa. "Ink Production and Engineering." Journal of the Japan Society of Colour Material 71, no. 1 (1998): 57–67. http://dx.doi.org/10.4011/shikizai1937.71.57.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

11

HARRISON, R. E. W. "PRODUCTION ENGINEERING, COMMUNIST POTENTIAL." Journal of the American Society for Naval Engineers 65, no. 2 (2009): 243–52. http://dx.doi.org/10.1111/j.1559-3584.1953.tb05849.x.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

12

Bonney, M. C. "Computer aided production engineering." Artificial Intelligence in Engineering 3, no. 1 (1988): 52. http://dx.doi.org/10.1016/0954-1810(88)90046-5.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

13

Ghosh, S. K. "Computer-aided production engineering." Journal of Mechanical Working Technology 16, no. 2 (1988): 223–24. http://dx.doi.org/10.1016/0378-3804(88)90170-2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

14

Marciniak, Stanisław. "The role of economy and management in production engineering." Scientific Papers of Silesian University of Technology. Organization and Management Series 2017, no. 108 (2017): 255–62. http://dx.doi.org/10.29119/1641-3466.2017.108.23.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

15

Ogita, Shinjiro, Hirotaka Uefuji, Masayuki Morimoto, and Hiroshi Sano. "Metabolic engineering of caffeine production." Plant Biotechnology 22, no. 5 (2005): 461–68. http://dx.doi.org/10.5511/plantbiotechnology.22.461.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

16

Pustějovská, Pavlína, and Simona Jursová. "Process Engineering in Iron Production." Chemical and Process Engineering 34, no. 1 (2013): 63–76. http://dx.doi.org/10.2478/cpe-2013-0006.

Testo completo

Abstract (sommario):

Abstract Balance, thermodynamic and mainly kinetic approaches using methods of process engineering enable to determine conditions under which iron technology can actually work in limiting technological states, at the lowest reachable fuel consumption (reducing factor) and the highest reachable productivity accordingly. Kinetic simulation can be also used for variant prognostic calculations. The paper deals with thermodynamics and kinetics of iron making process. It presents a kinetic model of iron oxide reduction in a low temperature area. In the experimental part it deals with testing of iron

Gli stili APA, Harvard, Vancouver, ISO e altri

17

Vinuselvi, Parisutham, Jung Min Park, Jae Myung Lee, Kikwang Oh, Cheol-Min Ghim, and Sung Kuk Lee. "Engineering microorganisms for biofuel production." Biofuels 2, no. 2 (2011): 153–66. http://dx.doi.org/10.4155/bfs.11.4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

18

Kramer, Judith. "FROM DESIGN ENGINEERING TO PRODUCTION." ATZextra worldwide 16, no. 3 (2011): 62–64. http://dx.doi.org/10.1365/s40111-011-0285-4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

19

Hirose, Toshiyuki. "Production Engineering for Sculptured Surfaces." Journal of the Society of Mechanical Engineers 101, no. 958 (1998): 643–45. http://dx.doi.org/10.1299/jsmemag.101.958_643.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

20

Eissler, R., and H. M. Reinert. "Useware Engineering for Production Systems." IFAC Proceedings Volumes 34, no. 16 (2001): 495–98. http://dx.doi.org/10.1016/s1474-6670(17)41571-0.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

21

Sheesley, John H. "Quality Engineering in Production Systems." Technometrics 32, no. 4 (1990): 457–58. http://dx.doi.org/10.1080/00401706.1990.10484745.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

22

Ye, Lidan, Xiaomei Lv, and Hongwei Yu. "Engineering microbes for isoprene production." Metabolic Engineering 38 (November 2016): 125–38. http://dx.doi.org/10.1016/j.ymben.2016.07.005.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

23

Ronald, Pamela. "Engineering Feedstocks for Biofuel Production." Biophysical Journal 98, no. 3 (2010): 210a. http://dx.doi.org/10.1016/j.bpj.2009.12.1131.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

24

Khare, Sushant, Shrish Bajpai, and P. K. Bharati. "Production Engineering Education in India." Management and Production Engineering Review 6, no. 1 (2015): 21–25. http://dx.doi.org/10.1515/mper-2015-0004.

Testo completo

Abstract (sommario):

Abstract Present paper deals with the field of Production Engineering specifically its standard of education in India. This discipline of engineering focuses on the capability of an engineer not just as a technician but also as a manager. As a result industry is also favoring the development of this field. This paper reviews the educational structure followed in India for engineering education. It aims to give a clear idea of standard of this discipline's courses being run in India at different levels of engineering, considering both centrally funded and private institutions. It also covers th

Gli stili APA, Harvard, Vancouver, ISO e altri

25

Woodall, William H. "Quality Engineering in Production Systems." Journal of Quality Technology 21, no. 4 (1989): 297–98. http://dx.doi.org/10.1080/00224065.1989.11979194.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

26

IWAMOTO, Shoichi, and Fujio TODA. "Engineering Education and Creative Production." Proceedings of the Symposium on Stirlling Cycle 2002.6 (2002): 97–98. http://dx.doi.org/10.1299/jsmessc.2002.6.97.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

27

TATSUTA, Yasuto. "Digital Engineering of Automotive Production." Journal of the Japan Society for Precision Engineering 72, no. 2 (2006): 180–84. http://dx.doi.org/10.2493/jjspe.72.180.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

28

INAMURA, Toyoshiro. "Expectation for Production Engineering Simulation." Journal of the Japan Society for Precision Engineering 76, no. 8 (2010): 853–56. http://dx.doi.org/10.2493/jjspe.76.853.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

29

Ollis, David L., Jian-Wei Liu, and Bradley J. Stevenson. "Engineering Enzymes for Energy Production." Australian Journal of Chemistry 65, no. 6 (2012): 652. http://dx.doi.org/10.1071/ch11452.

Testo completo

Abstract (sommario):

Harvesting the energy of sunlight can be achieved with a variety of processes and as one becomes obsolete, others will need to be developed to replace it. The direct conversion of sunlight into electrical energy could be used to provide power. Energy could also be obtained by combusting hydrogen produced by splitting of water with sunlight. None of these direct approaches will entirely satisfy the entire energy needs of a modern economy and the conversion of biological materials into liquid fuels for transport and other applications may prove to be important for tomorrow’s energy needs. In fac

Gli stili APA, Harvard, Vancouver, ISO e altri

30

Takakura, T. "Greenhouse production in engineering aspects." IFAC Proceedings Volumes 24, no. 11 (1991): 19–21. http://dx.doi.org/10.1016/b978-0-08-041273-3.50008-2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

31

Kübler, Karl, Stefan Scheifele, Christian Scheifele, and Oliver Riedel. "Model-Based Systems Engineering for Machine Tools and Production Systems (Model-Based Production Engineering)." Procedia Manufacturing 24 (2018): 216–21. http://dx.doi.org/10.1016/j.promfg.2018.06.036.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

32

Mathiassen, Svend Erik, Helena Franzon, Steve Kihlberg, Per Medbo, and Jørgen Winkel. "Integrating Production Engineering and Ergonomics in Production System Design." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 44, no. 30 (2000): 5–501. http://dx.doi.org/10.1177/154193120004403027.

Testo completo

Abstract (sommario):

Within the framework of the COPE program, a tool is described for integrated documentation and prediction of ergonomic and technical performance in production systems. The tool is based on data on exposures and durations of tasks occurring in production. A case study is reviewed to illustrate initial efforts to implement the tool, as well as further lines of its development.

Gli stili APA, Harvard, Vancouver, ISO e altri

33

Kovalevskyy, Sergiy Vadimovich, and Olena Sergiivna Kovalevska. "Engineering consulting technology in production engineering intelligent mobile machines." Journal of Zhytomyr State Technological University. Series: Engineering 2, no. 2(80) (2017): 67–72. http://dx.doi.org/10.26642/tn-2017-2(80)-67-72.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

34

Kovalevskyy, Sergiy, Olena Kovalevska, Predrag Dašić, Dušan Ješić, and Pavel Kovač. "Engineering Consulting Technology in Production Engineering Intelligent Mobile Machines." International Journal of Industrial Engineering and Management 8, no. 4 (2017): 203–8. http://dx.doi.org/10.24867/ijiem-2017-4-120.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

35

Nozari, Mehrnaz, and Hamed Nahr. "ENGINEERING CELLULAR HARMONY: A COMPREHENSIVE LITERATURE REVIEW ON CELL PRODUCTION SYSTEM DESIGN." American Journal of Management and Economics Innovations 6, no. 1 (2024): 6–11. http://dx.doi.org/10.37547/tajmei/volume06issue01-02.

Testo completo

Abstract (sommario):

This literature review delves into the intricate domain ofcell production system design, offering a comprehensive exploration of the methodologies, technologies, and advancements that contribute to engineering cellular harmony. The study synthesizes key findings from a broad spectrum of research, providing insights into the diverse strategies employed in designing cell production systems. By analyzing current trends, challenges, and future directions, this review aims to guide researchers, engineers, and practitioners in advancing the field of cell production system design.

Gli stili APA, Harvard, Vancouver, ISO e altri

36

Kim, Jinho, Edward E. K. Baidoo, Bashar Amer, et al. "Engineering Saccharomyces cerevisiae for isoprenol production." Metabolic Engineering 64 (March 2021): 154–66. http://dx.doi.org/10.1016/j.ymben.2021.02.002.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

37

Molotilov, B. V., M. P. Galkin, and B. A. Kornienkov. "Production of amorphous electrical-engineering steel." Steel in Translation 44, no. 12 (2014): 939–41. http://dx.doi.org/10.3103/s0967091214120134.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

38

Lee, S. J., and A. P. Graves. "Benchmarking production processes in civil engineering." Proceedings of the Institution of Civil Engineers - Civil Engineering 138, no. 4 (2000): 167–73. http://dx.doi.org/10.1680/cien.2000.138.4.167.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

39

Cordeiro, Rodrigo, David N. Prata, and Patrick Letouze. "Global Software Engineering for Audio Production." International Journal of Social Science and Humanity 4, no. 4 (2014): 283–87. http://dx.doi.org/10.7763/ijssh.2014.v4.364.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

40

R, Reshmy, Eapen Philip, Deepa Thomas, et al. "Bacterial nanocellulose: engineering, production, and applications." Bioengineered 12, no. 2 (2021): 11463–83. http://dx.doi.org/10.1080/21655979.2021.2009753.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

41

Kravchenko, E. G., T. A. Otryaskina, and A. A. Shershnev. "QUALITY ASSESSMENT OF ENGINEERING PRODUCTION PROCESSES." Scholarly Notes of Komsomolsk-na-Amure State Technical University, no. 7 (2021): 79–87. http://dx.doi.org/10.17084/20764359-2021-55-79.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

42

Bergert, M., and J. Kiefer. "Mechatronic Data Models in Production Engineering." IFAC Proceedings Volumes 43, no. 4 (2010): 60–65. http://dx.doi.org/10.3182/20100701-2-pt-4011.00012.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

43

Blanchard, B. C. "Book Review: Management of Engineering Production." International Journal of Electrical Engineering & Education 23, no. 3 (1986): 262. http://dx.doi.org/10.1177/002072098602300313.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

44

Xu, Peng, and Mattheos AG Koffas. "Metabolic engineering ofEscherichia colifor biofuel production." Biofuels 1, no. 3 (2010): 493–504. http://dx.doi.org/10.4155/bfs.10.13.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

45

Schoen, F., F. Plonka, and G. Olling. "Computer Applications in Production and Engineering." Journal of the Operational Research Society 50, no. 2 (1999): 191. http://dx.doi.org/10.2307/3010570.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

46

Suliman, Ahmed E., Khaled M. ء. Abdelbary, and Haytham S. Helmy. "ENGINEERING STUDIES IN INTENSIVE POULTRY PRODUCTION." Misr Journal of Agricultural Engineering 27, no. 4 (2010): 1288–307. http://dx.doi.org/10.21608/mjae.2010.104828.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

47

KUČERA, J. "Engineering aspects of industrial enzyme production." Kvasny Prumysl 31, no. 7 (1985): 185–88. http://dx.doi.org/10.18832/kp1985046.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

48

Warman, E. A. "Computer Applications in Production and Engineering." R&D Management 15, no. 3 (1985): 259. http://dx.doi.org/10.1111/j.1467-9310.1985.tb00555.x.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

49

Cheng, Ke-Ke, Gen-Yu Wang, Jing Zeng, and Jian-An Zhang. "Improved Succinate Production by Metabolic Engineering." BioMed Research International 2013 (2013): 1–12. http://dx.doi.org/10.1155/2013/538790.

Testo completo

Abstract (sommario):

Succinate is a promising chemical which has wide applications and can be produced by biological route. The history of the biosuccinate production shows that the joint effort of different metabolic engineering approaches brings successful results. In order to enhance the succinate production, multiple metabolical strategies have been sought. In this review, different overproducers for succinate production, including natural succinate overproducers and metabolic engineered overproducers, are examined and the metabolic engineering strategies and performances are discussed. Modification of the mec

Gli stili APA, Harvard, Vancouver, ISO e altri

50

Yamane, Tsuneo. "Cultivation engineering of microbial bioplastics production." FEMS Microbiology Letters 103, no. 2-4 (1992): 257–64. http://dx.doi.org/10.1111/j.1574-6968.1992.tb05846.x.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!