Accedi

Bibliografie tematiche / Pump design

Indice

Articoli di riviste
Tesi
Libri
Capitoli di libri
Atti di convegni
Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Pump design"

Autore: Grafiati

Pubblicato: 4 giugno 2021

Ultima modifica: 20 febbraio 2023

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Pump design".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Pump design"

1

Wadham, Paul. "Syringe Pump Design." Engineering in Medicine 15, no. 4 (1986): 171–74. http://dx.doi.org/10.1243/emed_jour_1986_015_048_02.

Testo completo

Abstract (sommario):

With the evolution of special care baby, intensive care, and coronary care units over the last decade, there has developed a need for greater accuracy in the control of increasingly potent infusions. The design of bedside syringe pump infusers that administer the contents of a syringe to a patient at a constant and predetermined rate will be considered in terms of their ergonomics, control, and safety. Syringe pump design has evolved over the past few years from simple mechanised forms of syringe driving to very sophisticated and precisely-controlled drive systems capable of high volumetric ac

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Zheng, Jin Hua, Cong Hui Li, Chong Zhang, and Yun Feng Chao. "Design on UHV System with TSP." Applied Mechanics and Materials 310 (February 2013): 319–22. http://dx.doi.org/10.4028/www.scientific.net/amm.310.319.

Testo completo

Abstract (sommario):

A UHV(ultra-high vacuum) system, which used as deposition equipment with the assistance of high and low vacuum measuring instruments and other accessories, was designed in this paper. A CMP (composite molecular pump) in parallel with TSP (titanium sublimation pump) as the main pump and a rotary-vane pump as the backing pump were designed in this system. After a CMP with displacement 2300l/s was chosen as the one of the main pumps, the total flow conductance between the outlet of vacuum chamber and the CMP was 1344l/s. The rough pump-down time was approximate 5 min by using a rotary-vane pump w

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Gui, Zhenzhen, Xiaosi Zhou, Yaohua Zeng, et al. "Design and Experimental Study of a Tetragonal Rotor Pump Based on Wankel Geometry." Sensors 22, no. 17 (2022): 6608. http://dx.doi.org/10.3390/s22176608.

Testo completo

Abstract (sommario):

Wankel pump designs have not been fully established, with existing designs limited to bicornous rotor pumps and triangular rotor pumps. Here, on the basis of Wankel geometry, we present a tetragonal rotor pump with a three-lobe epicycloid and its conjugate envelope as chamber and rotor profile. First, the design method and basic working principle of the pump are introduced. Four groups of prototypes with different shape factors were manufactured, and their flow and pressure characteristics were experimentally studied. Numerical study showed that the flow rate irregularity of the pump is lower

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Dhimmar, Vishalkumar, Jay Prajapti,, Mital Patel,, Banti Mistry,, Jignesh Parmar, and Dhruv Patel,. "Design of Solar Steam Irrigation Pump." International Journal of Engineering Research 3, no. 5 (2014): 315–17. http://dx.doi.org/10.17950/ijer/v3s5/504.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Zhu, Yan. "Analysis and Design of an Exponential Charge Pump." Advanced Materials Research 753-755 (August 2013): 1483–88. http://dx.doi.org/10.4028/www.scientific.net/amr.753-755.1483.

Testo completo

Abstract (sommario):

This paper analyzed efficiency performance of two most popular charge pumps: Linear Dickson charge pump and the Exponential Dickson charge pump. The analysis result indicated that in a certain range, exponential charge pump had a much higher efficiency than the linear one. With this analysis result, a novel exponential charge pump was proposed. The simulation result shows the proposed charge pump has a 18.4% improvement in efficiency.

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Wen, C. Y., and H. T. Chang. "Design and Characterization of Valveless Impedance Pumps." Journal of Mechanics 25, no. 4 (2009): 345–54. http://dx.doi.org/10.1017/s1727719100002835.

Testo completo

Abstract (sommario):

ABSTRACTThis study designs, fabricates and characterizes three valveless impedance pumps, namely a symmetrical pump with a circular cross-section, an asymmetrical pump with a circular cross-section, and an asymmetrical pump with a rectangular cross-section. The pressure head and flow rate characteristics of the three pumps are investigated as a function of the compression location, the compression frequency and the compression amplitude. The experimental results show that the flow is reversible in every case. Moreover, the pressure head is found to be significantly dependent on the actuating f

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Mimmi, G., and P. Pennacchi. "INTERNAL LOBE PUMP DESIGN." Transactions of the Canadian Society for Mechanical Engineering 21, no. 2 (1997): 109–21. http://dx.doi.org/10.1139/tcsme-1997-0008.

Testo completo

Abstract (sommario):

The subject of this paper is the theoretical analysis of the internal lobe pump which is a particular type of positive displacement rotary pump. The main components of the pump are the rotors: usually the outer one is characterised by lobes with circular shape, while the inner rotor profile is determined as conjugate to the other. For this reason the first topic presented here is the definition of the geometry of the rotors starting from the design parameters. The choice of these parameters is subject to some limitations in order to avoid inner rotor undercutting and to limit the pressure angl

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Zhang, Jianyi, Hao Yang, Haibing Liu, Liang Xu, and Yuwei Lv. "Pressure Fluctuation Characteristics of High-Speed Centrifugal Pump with Enlarged Flow Design." Processes 9, no. 12 (2021): 2261. http://dx.doi.org/10.3390/pr9122261.

Testo completo

Abstract (sommario):

The pressure fluctuations of high-speed centrifugal pumps are the hotspot in pump research. Pressure fluctuations is differ for different structural designs and flow structures. High-speed centrifugal pumps are usually designed to increase efficiency with an enlarged flow design at a low specific speed, which changes the structure of the pump. In order to analyze the pressure fluctuations of a high-speed centrifugal pump with an enlarged flow design, the pressure was measured, and the flow field of the pump was simulated with different flow rates. Through analysis, we found that pressure fluct

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Gok Metin, Zehra. "Design and production of a demountable modular infusion pump." New Trends and Issues Proceedings on Humanities and Social Sciences 4, no. 2 (2017): 139–48. http://dx.doi.org/10.18844/prosoc.v4i2.2741.

Testo completo

Abstract (sommario):

The study aimed to produce a new pump with different and improved features and included three phases. In phase one, we collected the views of 40 nurses on pumps available in the market. In phase two, a pump was designed and a prototype was produced. In phase three, 10 nurses used and evaluated the prototype. The prototype combined three intravenous infusion pumps and one enteral pump in a single machine. Nurses assessed the prototype in a practice laboratory. All nurses found prototype very adequate with respect to carrying and installing. 90% of nurses found the prototype very adequate and pr

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Wang, Yuqin, Jian Luo, Shuai Liu, Zhibo Han, and Xiaoqiang Ni. "Hydraulic optimization design of centrifugal pumps aiming at low vibration noise." AIP Advances 12, no. 9 (2022): 095026. http://dx.doi.org/10.1063/5.0111256.

Testo completo

Abstract (sommario):

In order to reduce the vibration noise generated by the centrifugal pump in the working process and improve the working efficiency of the centrifugal pump, the sound field numerical calculation of IS80-65-160 single-stage single-suction centrifugal pump was carried out. Under the condition that the parameters of the pump body and the impeller remain unchanged, the number of blades of the prototype pump impeller was designed as 4, 5, 6, and 7, respectively. The flow-induced vibration and noise characteristics of centrifugal pumps were studied from two aspects of numerical simulation and test, a

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Pump design"

1

White, Susan Jennifer. "Bubble pump design and performance." Thesis, Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/16914.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Lemmer, Edward Charles. "Wind-electric pump system design." Thesis, Stellenbosch : University of Stellenbosch, 2009. http://hdl.handle.net/10019.1/2527.

Testo completo

Abstract (sommario):

Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2009.<br>The aim of this study is to analyse the operation of a wind-electric pumping system (WEPS) as an alternative to conventional mechanical wind pumps for application in stand-alone water-pumping schemes. The steady-state as well as the dynamic operation of such a system is analysed. Through these analyses, practical guidelines are given in the design and sizing of the different system components to ensure efficient and reliable operation. Theoretical analyses are supported by measured results conducted o

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Keller, Charles Anderson. "Novel Concepts in Piezohydraulic Pump Design." Thesis, Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/5144.

Testo completo

Abstract (sommario):

Over the past several years, there has been significant development in the field of applications for piezoelectric materials. This thesis focuses on using these materials in a piezohydraulic pump system. Piezopump systems typically operate by pushing fluid through check valves to produce positive fluid flow. The accompanying hydraulic system utilizes a control valve, hydraulic accumulator, and hydraulic actuator. The function of the piezopump is to convert the very small displacements of the piezoelectric stack actuators into useful work. This paper details the design, construction, and t

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Piazzarolo, Bruno Aiala. "Design optimization of oxygenated fluid pump." Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/75673.

Testo completo

Abstract (sommario):

Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2012.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 66).<br>In medical emergencies, an oxygen-starved brain quickly suffers irreparable damage. In many cases, patients who stop breathing can be resuscitated but suffer from brain damage. Dr. John Kheir from Boston Children's Hospital created a compressible fluid that can re-oxygenate blood quickly in patients with asphyxia and cardiac arrest. Because the fluid is compressible, the set infusion rate on an ordinary pump doe

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Melander, Texas. "Design of a Mobile Pump Sump." Thesis, KTH, Maskinkonstruktion (Inst.), 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-201650.

Testo completo

Abstract (sommario):

Vid gruvdrift krävs det att grundvattnet pumpas undan och det görs med hjälp av ett system av pumpar placerade i utsprängda sumpar där vatten samlas. Dessa gropar är stora och dyra att tillverka och de lider ofta av problem med sedimentering. När en tunnel inte längre används fylls denna ofta igen med sten och allt arbete och alla pengar som lagts på att spränga ut dessa gropar går förlorade. Detta har lett till att Xylem vill testa ett koncept med en mobil pumpsump som kan återanvändas på en annan plats.Denna rapport beskriver processen där ett koncept för en mobil pumpsump har utvecklats med

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Olimstad, Grunde. "Characteristics of reversible-pump turbines." Doctoral thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for energi- og prosessteknikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19750.

Testo completo

Abstract (sommario):

The primary goal for this PhD project has been to investigate instability of reversiblepump turbines (RPTs) as a phenomenon and to find remedies to solve it. The instability occurs for turbines with s-shaped characteristics, unfavourable waterways and limited rotating inertia. It is only observed for certain operation points at either high speed or low load. These correspond to either high values of Ned or low values of Qed. The work done in this PhD thesis can be divided into the three following categories. Investigate and understand the behaviour of a pump turbine: A model was designed in or

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Gollapudi, Gopinath. "Design optimization of a fuel pump support." Ohio : Ohio University, 1999. http://www.ohiolink.edu/etd/view.cgi?ohiou1175880688.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Oates, William Sumner. "Piezoelecytric pump design and system dynamic model." Thesis, Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/17679.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Foslie, Sverre Stefanussen. "Design of Centrifugal Pump for Produced Water." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for energi- og prosessteknikk, 2013. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-24348.

Testo completo

Abstract (sommario):

During the spring of 2008, Jón Bergmann Heimisson developed a pump design program in Matlab. The program has been further developed during the work with this thesis, as well as in the author's preceding project thesis, giving key information for an existing pump design. The aim of this Master's thesis has been to verify the calculation of pump characteristics and velocity profiles at the impeller outlet through testing.A detailed description of the relevant theory regarding pump design has been presented, and different calculation models for the pump characteristics have been ex

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Engin, Ertan. "Design, Construction And Performance Evaluation Of A Submersible Pump With Numerical Experimentation." Master's thesis, METU, 2003. http://etd.lib.metu.edu.tr/upload/12606532/index.pdf.

Testo completo

Abstract (sommario):

Due to the increasing demand, nonclog type sewage pumps are designed and manufactured in large amounts all over the world. However, a methodology on the design of these special duty pumps is not encountered in the literature. Therefore, the manufacturers tend to develop their own empirical methodologies. In this thesis, a nonclog pump is designed and constructed on the basis of suitable approaches of known centrifugal pump design methods. In this frame, a nonclog type submersible pump that is capable of handling solids, up to a diameter of 80 mm is aimed to be designed. The designed pump deli

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Libri sul tema "Pump design"

1

Turton, R. K. Rotodynamic pump design. Cambridge University Press, 1994.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Centrifugal pump design. John Wiley & Sons, 2000.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Japikse, David. Centrifugal pump design and performance. Concepts ETI, 1997.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

The reciprocating pump: Theory, design, and use. 2nd ed. Krieger Pub. Co., 1995.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

The reciprocating pump: Theory, design, and use. Wiley, 1987.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Heat pump technology: Systems design, installation, and troubleshooting. 2nd ed. Prentice Hall, 1989.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Electrical submersible pump manual: Design, operations, and maintenance. Gulf Professional Pub., 2009.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Sanks, Robert L. Improvements in pump intake basin design: Project summary. U.S. Environmental Protection Agency, Risk Reduction Engineering Laboratory, 1995.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Eisa, Mahmoud Abdel Rahman. Design and optimisation studies on heat pump systems. University of Salford, 1987.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

National Research Council of Canada. Division of Energy. Peat Energy Program. Design and Construction of Peat Slurry Pump/Macerator. s.n, 1985.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Capitoli di libri sul tema "Pump design"

1

Zell, B. P. "Design Considerations for Pumping Applications of Variable Frequency Drives." In Pump Technology. Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-662-38296-7_11.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Princer, Kathy. "Pump Design and Mechanics." In A Guide to Mechanical Circulatory Support. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-05713-7_2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Tanzawa, Toru. "Pump Control Circuits." In On-chip High-Voltage Generator Design. Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4614-3849-6_4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Sinclair, M. R., and G. Bjorkander. "A New Approach to the Design of High Capacity Storm and Foul Pumping Stations." In Pump Technology. Springer Berlin Heidelberg, 1989. http://dx.doi.org/10.1007/978-3-662-38296-7_5.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Tanzawa, Toru. "Charge Pump Circuit Theory." In On-chip High-Voltage Generator Design. Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4614-3849-6_2.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Ludwig, Gerhard, Stephan Meschkat, and Bernd Stoffel. "Design Factors Affecting Pump Efficiency." In Energy Efficiency in Motor Driven Systems. Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-642-55475-9_77.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Ahmed, Jasim, and Rajib Ul Alam Uzzal. "Fluid Flow and Pump Selection." In Handbook of Food Process Design. Wiley-Blackwell, 2012. http://dx.doi.org/10.1002/9781444398274.ch11.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Karassik, Igor J., and Terry McGuire. "Pump Operation at Off-Design Conditions." In Centrifugal Pumps. Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-6604-5_22.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Hawlader, M. N. A., and K. A. Jahangeer. "Heat Pump Design for Food Processing." In Handbook of Food Process Design. Wiley-Blackwell, 2012. http://dx.doi.org/10.1002/9781444398274.ch21.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Tanzawa, Toru. "Design of AC–DC Charge Pump." In Analog Circuits and Signal Processing. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-21975-2_4.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Pump design"

1

Horner, Jim W., and Martin R. DeBusman. "Pump Station Design." In 2014 10th International Pipeline Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/ipc2014-33740.

Testo completo

Abstract (sommario):

This paper reviews Enbridge’s recent experience with the design and construction of new pump stations during its most recent wave of expansion that started in 2007. This expansion includes over $4 billion in pump station construction and upgrade. Enbridge is working on its third generation station design and is starting to benefit from a consistent design composed of standard elements. The principle objective of this design effort was to improve environmental protection at pump stations. In the design’s development many different areas of concern were investigated including: building code comp

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Kru¨ger, Susanne, Youcef Ait Bouziad, and Wolfgang Maurer. "Pump Sump CFD for Vertical Pump Design." In ASME 2009 Fluids Engineering Division Summer Meeting. ASMEDC, 2009. http://dx.doi.org/10.1115/fedsm2009-78162.

Testo completo

Abstract (sommario):

Pump sump designs play an important role for vertical pumps since they are responsible for the flow conditions at the impeller inlet. To first foresee and then prevent possible damages resulting from uneven flow conditions, computational fluid dynamics (CFD) can support model tests to reduce at least costs, but, with increasing computer power, also time. This paper compares different approaches to model the flow in pump sumps: The conventional single phase fixed water surface method and the multiphase (air+water) free water surface method. Both methods are compared with unsteady state computat

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Tchavdarov, Boyko, Denairic Hardersen, and Arnie Sdano. "Optimal Fire Pump Design: CFD-Aided Redesign of a Fire Pump." In ASME 2009 Fluids Engineering Division Summer Meeting. ASMEDC, 2009. http://dx.doi.org/10.1115/fedsm2009-78266.

Testo completo

Abstract (sommario):

The design criteria of rotodynamic pumps with optimal efficiency have been covered widely in the literature for many years, however little attention has been given to hydraulic design of centrifugal fire pumps. Fire pumps have different design objectives than commercial pumps. Cost effective design solutions for fire pumps require a more comprehensive analysis of pump performance characteristics in order to achieve the desired curve shape while minimizing the driver size. Computer-aided design (CAD) and Computational-Fluid Dynamics (CFD) analyses of pump hydraulic components have been performe

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Apostolellis, Panagiotis, Marjee Chmiel, and Doug A. Bowman. ""Pump that press!"." In IDC '18: Interaction Design and Children. ACM, 2018. http://dx.doi.org/10.1145/3202185.3202736.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Cheng, Xianwei, Yang Zhao, Hui Zhao, and Yuan Xie. "Packet pump." In DAC '18: The 55th Annual Design Automation Conference 2018. ACM, 2018. http://dx.doi.org/10.1145/3195970.3196087.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Addie, Graeme R., J. R. Kadambi, and Robert Visintainer. "Design and Application: Slurry Pump Technology." In ASME 2005 Fluids Engineering Division Summer Meeting. ASMEDC, 2005. http://dx.doi.org/10.1115/fedsm2005-77253.

Testo completo

Abstract (sommario):

Slurry Pumps are used throughout the world for the Transportation of Solids in Coal, Copper Iron-Ore, Phosphate and other Mines. They are also used in Dredges cleaning Waterways in Sand and Gravel, and in Phosphoric Acid and Alumina Plants. About $500 million worth of slurry pumps and replacement parts are estimated to be produced every year. Slurry pumps are similar to water pumps so a lot of the available water pump technology can still be used. When it comes to determining pipeline velocities and heads, and the effect of slurries on performance, however, different technologies are found to

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Kirol, Lance D., and Michael W. Dacus. "Magnetic Heat Pump Design." In 22nd Intersociety Energy Conversion Engineering Conference. American Institute of Aeronautics and Astronautics, 1987. http://dx.doi.org/10.2514/6.1987-9025.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Cocha, Guillermo, Omar Rodriguez, Hugo Mazzeo, Jose Rapallini, Carlos Amorena, and Carlos E. D'Attellis. "Intelligent Insulin Pump Design." In 2018 Argentine Congress of Computer Science and Research Development (CACIDI). IEEE, 2018. http://dx.doi.org/10.1109/cacidi.2018.8584364.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Aquea, Sebastian Lara, Ricardo Olivares, and Barbara Dumas Feris. "Flat-gain DFRA design considering pump-to-pump FWM." In 2012 IV International Congress on Ultra Modern Telecommunications and Control Systems and Workshops (ICUMT 2012). IEEE, 2012. http://dx.doi.org/10.1109/icumt.2012.6459733.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Horner, Jim. "Pump Station Design II: A Tale of Two Pump Stations." In 2022 14th International Pipeline Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/ipc2022-81585.

Testo completo

Abstract (sommario):

Abstract IPC 2014-33740 [1], Pump Station Design, summarized the work Enbridge had completed on the design and construction of 65 new pump stations and the modification of a further 16 existing stations. The $4.0 billion dollar scope was completed over a 12-year period, with the last stations being completed in 2019. This paper documents the application of this body of work on the Keystone XL Pipeline project for TC Energy. This work included the design of 32 new pump stations. The Keystone XL project experienced delays due to legal and regulatory challenges which gave TC Energy the opportunit

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Pump design"

1

ANGELETTE, LUCAS, and RAYMOND BELLIVEAU. ALTERNATIVE ALL-METAL SCROLL PUMP DESIGN. Office of Scientific and Technical Information (OSTI), 2021. http://dx.doi.org/10.2172/1822674.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

2

Adkins, B. J. Advanced Design Mixer Pump Tank 18 Design Modifications Summary Report. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/805608.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

3

Ozbek, Metin, Cy Yavuzturk, and George Pinder. Optimal Ground Source Heat Pump System Design. Office of Scientific and Technical Information (OSTI), 2015. http://dx.doi.org/10.2172/1312959.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

4

Huang, F. H. Miscellaneous component design for Tank 241SY101 pump removal. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/34303.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

5

Kang, Myong H., Andrew P. Moore, and Ira S. Moskowitz. Design and Assurance Strategy for the NRL Pump. Defense Technical Information Center, 1997. http://dx.doi.org/10.21236/ada333464.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

6

Howland, John S., Alve J. Erickson, Jules Gordon, and Henri O. Berteaux. Conceptual Design of an Autonomous Marine Booster Pump. Defense Technical Information Center, 2000. http://dx.doi.org/10.21236/ada382835.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

7

Hall, M. N. ,. Westinghouse Hanford. Life-cycle cost analysis of advanced design mixer pump. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/296577.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

8

Rice, C. K. The ORNL Modulating Heat Pump Design Tool User's Guide. Office of Scientific and Technical Information (OSTI), 2001. http://dx.doi.org/10.2172/788665.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

9

Costello, Mark F. Design, Fabrication, and Testing of a Portable Suction Pump. Defense Technical Information Center, 2000. http://dx.doi.org/10.21236/ada375291.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

10

Rucinksi, R. Design Document for Control Dewar and Vacuum Pump Platforms. Office of Scientific and Technical Information (OSTI), 1997. http://dx.doi.org/10.2172/1032125.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!