Articoli di riviste sul tema "Steel"
Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili
Vedi i top-50 articoli di riviste per l'attività di ricerca sul tema "Steel".
Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.
Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.
Vedi gli articoli di riviste di molte aree scientifiche e compila una bibliografia corretta.
Gao, Bing, Bo Wang, and Jian Qi Zou. "Anti-Pulls Out Strength Research on Concretes Component of Low-Alloy Coupled Steels and Cold Rolling Belt Rib Steel Bars." Applied Mechanics and Materials 121-126 (October 2011): 2537–40. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.2537.
Testo completoZhang, Yan Mei, Kang Qin, Qing Ping Du, Jia Qiang Huang, Ge Guo Shuai, and Xiao Hua Jie. "Study on Antibacterial Properties of SUSXM7 Cu- Bearing Austenitic Stainless Steel." Advanced Materials Research 652-654 (January 2013): 997–1001. http://dx.doi.org/10.4028/www.scientific.net/amr.652-654.997.
Testo completoLi, Yang, Jing Wang, Jiaquan Zhang, Changgui Cheng, and Zhi Zeng. "Deformation and Structure Difference of Steel Droplets during Initial Solidification." High Temperature Materials and Processes 36, no. 4 (2017): 347–57. http://dx.doi.org/10.1515/htmp-2016-0113.
Testo completoShi, Gang, Huatian Zhao, and Yang Gao. "Research on high‐performance steel structure with high‐strength steel column, ordinary‐strength steel beam, and low‐yield‐point steel BRB." ce/papers 6, no. 3-4 (2023): 645–49. http://dx.doi.org/10.1002/cepa.2657.
Testo completoChen, Shan, Xue Qun Chen, Lin Zheng, Guo Ming Li, Wan Shun Chang, and Guo Liang Cao. "The Effect of Calcium Treatment on the Corrosion Resistance of Manganese Steels." Advanced Materials Research 668 (March 2013): 850–55. http://dx.doi.org/10.4028/www.scientific.net/amr.668.850.
Testo completoČerný, Michal, Josef Filípek, Pavel Mazal, and David Varner. "Notch aspects of RSP steel microstructure." Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 60, no. 5 (2012): 49–60. http://dx.doi.org/10.11118/actaun201260050049.
Testo completoSidorova, Elena, Andrey V. Karasev, Denis Kuznetsov, and Pär G. Jönsson. "Modification of Non-Metallic Inclusions in Oil-Pipeline Steels by Ca-Treatment." Metals 9, no. 4 (2019): 391. http://dx.doi.org/10.3390/met9040391.
Testo completoGao, Bing, and B. Wang. "Two Kinds of Cold Working Steel Performance Contrast Research." Applied Mechanics and Materials 271-272 (December 2012): 316–19. http://dx.doi.org/10.4028/www.scientific.net/amm.271-272.316.
Testo completoWu, Guo Sheng, and Yu Tao Wang. "Study on Thermal Fatigue Performance of Cold Work Roll Steel." Applied Mechanics and Materials 117-119 (October 2011): 817–20. http://dx.doi.org/10.4028/www.scientific.net/amm.117-119.817.
Testo completoZemlik, Martyna, Łukasz Konat, Kacper Leśny, and Krzysztof Jamroziak. "Comparison of Abrasive Wear Resistance of Hardox Steel and Hadfield Cast Steel." Applied Sciences 14, no. 23 (2024): 11141. http://dx.doi.org/10.3390/app142311141.
Testo completoMaube, Shem, Japheth Obiko, Josias Van der Merwe, Fredrick Mwema, Desmond Klenam, and Michael Bodunrin. "Comparative Study on Hot Metal Flow Behaviour of Virgin and Rejuvenated Heat Treatment Creep Exhausted P91 Steel." Applied Sciences 13, no. 7 (2023): 4449. http://dx.doi.org/10.3390/app13074449.
Testo completoYao, Zi Shan, Guang Xu, and Ming Xing Zhou. "Effect of Vanadium on the Microstructure and Property of Rebar Steel." Materials Science Forum 928 (August 2018): 269–72. http://dx.doi.org/10.4028/www.scientific.net/msf.928.269.
Testo completoSarangi, Soumya Sourav, and Avala Lavakumar. "Application of Rietveld Refinement and Williamson Hall Analysis in Ultra-Low Carbon to High Carbon Steels." Materials Science Forum 969 (August 2019): 3–8. http://dx.doi.org/10.4028/www.scientific.net/msf.969.3.
Testo completoYan, Zhu Ling. "Analysis of Factors Influencing the Performance of Q460 Steel." Applied Mechanics and Materials 599-601 (August 2014): 7–11. http://dx.doi.org/10.4028/www.scientific.net/amm.599-601.7.
Testo completoUmartono, Agus Setiyo. "PENGARUH PENGERJAAN DINGIN (COLD WORKING) PADA BAJA TAHAN KARAT JENIS AUSTENITIK (AUSTENITIC STAINLESS STEEL) TYPE 304." Wahana Teknik 1, no. 1 (2012): 65–86. https://doi.org/10.5281/zenodo.3693269.
Testo completoHuang, Shi Hong, Ting Lei, Hong Xiao Chi, and Dang Shen Ma. "Application of Si in Tool and Die Steel." Advanced Materials Research 676 (March 2013): 35–39. http://dx.doi.org/10.4028/www.scientific.net/amr.676.35.
Testo completoTao, Huimin, Yafang Cai, Zeqi Tong, Yong Huang, and Mingming Ding. "Improved Ability to Resist Corrosion of Selective-Laser-Melted Stainless Steel Based on Microstructure and Passivation Film Characteristics." Coatings 14, no. 5 (2024): 589. http://dx.doi.org/10.3390/coatings14050589.
Testo completoWang, Hailong, Yuanjian Wu, Xiaoyan Sun, Jiayan Ling, and Daoqin Zou. "Corrosion Resistance to Chloride of a Novel Stainless Steel: The Threshold Chloride Value and Effect of Surface State." Materials 12, no. 14 (2019): 2235. http://dx.doi.org/10.3390/ma12142235.
Testo completoYang, Yang, Kang Min Lee, Keun Yeong Oh, and Sung Bin Hong. "Structural Performance Evaluation of Built-Up Stub Steel Column with Various Steel Grades under Concentric Loading." Applied Mechanics and Materials 764-765 (May 2015): 127–31. http://dx.doi.org/10.4028/www.scientific.net/amm.764-765.127.
Testo completoSimcoe, Charles R. "Stainless Steel: The Steel That Does Not Rust, Part I." AM&P Technical Articles 173, no. 1 (2015): 38–39. http://dx.doi.org/10.31399/asm.amp.2015-01.p038.
Testo completoZhou, Zaifeng, Zhexuan Zhang, Quan Shan, Zulai Li, Yehua Jiang, and Ru Ge. "Influence of Heat-Treatment on Enhancement of Yield Strength and Hardness by Ti-V-Nb Alloying in High-Manganese Austenitic Steel." Metals 9, no. 3 (2019): 299. http://dx.doi.org/10.3390/met9030299.
Testo completoMirkhaydarova, K. A., A. S. Tyusenkov, and Rif G. Rizvanov. "Gas Corrosion of Pyrolysis Furnace Coils." Solid State Phenomena 284 (October 2018): 1297–301. http://dx.doi.org/10.4028/www.scientific.net/ssp.284.1297.
Testo completoSchaupp, Thomas, Dirk Schröpfer, Arne Kromm, and Thomas Kannengiesser. "Welding Residual Stress Distribution of Quenched and Tempered and Thermo-Mechanically Hot Rolled High Strength Steels." Advanced Materials Research 996 (August 2014): 457–62. http://dx.doi.org/10.4028/www.scientific.net/amr.996.457.
Testo completoEne, Anna, Aurel Stratan, Ioan Both, and Ovidiu Abrudan. "Monotonic and cyclic response of mild, stainless, and high‐strength steels, and their welded connections." ce/papers 6, no. 3-4 (2023): 595–600. http://dx.doi.org/10.1002/cepa.2481.
Testo completoEne, Anna, Ioan Both, Ovidiu Abrudan, Aurel Stratan, Horia Florin Daşcău, and Nicușor Alin Sîrbu. "Experimental Investigation of Monotonic and Cyclic Behaviour of High-Performance Steels." Key Engineering Materials 953 (August 25, 2023): 13–20. http://dx.doi.org/10.4028/p-k0xked.
Testo completoHwang, Joong-Ki. "Effect of Grain Size on Thermophysical Properties in Twinning-Induced Plasticity Steel." Materials 18, no. 4 (2025): 890. https://doi.org/10.3390/ma18040890.
Testo completoHabib, K. A., M. S. Damra, J. J. Saura, I. Cervera, and J. Bellés. "Breakdown and Evolution of the Protective Oxide Scales of AISI 304 and AISI 316 Stainless Steels under High-Temperature Oxidation." International Journal of Corrosion 2011 (2011): 1–10. http://dx.doi.org/10.1155/2011/824676.
Testo completoWang, Dong, and Ye Feng Guan. "Investigation on the Reaction of Refractories with 16MnRE Steel." Key Engineering Materials 575-576 (September 2013): 423–26. http://dx.doi.org/10.4028/www.scientific.net/kem.575-576.423.
Testo completoWang, Yuhang, Xian Zhang, Wenzhui Wei, Xiangliang Wan, Jing Liu, and Kaiming Wu. "Effects of Ti and Cu Addition on Inclusion Modification and Corrosion Behavior in Simulated Coarse-Grained Heat-Affected Zone of Low-Alloy Steels." Materials 14, no. 4 (2021): 791. http://dx.doi.org/10.3390/ma14040791.
Testo completoAromaa, Jari, Antero Pehkonen, Sönke Schmachtel, Istvan Galfi, and Olof Forsén. "Electrochemical Determination of Hydrogen Entry to HSLA Steel during Pickling." Advances in Materials Science and Engineering 2018 (2018): 1–7. http://dx.doi.org/10.1155/2018/3676598.
Testo completoWęgrzyn, Tomasz, Tadeusz Szymczak, Bożena Szczucka-Lasota, and Bogusław Łazarz. "MAG Welding Process with Micro-Jet Cooling as the Effective Method for Manufacturing Joints for S700MC Steel." Metals 11, no. 2 (2021): 276. http://dx.doi.org/10.3390/met11020276.
Testo completoMeng, Qian, Peiqing La, Liang Yao, Peng Zhang, Yupeng Wei, and Xin Guo. "Effect of Al on Microstructure and Properties of Hot-Rolled 2205 Dual Stainless Steel." Advances in Materials Science and Engineering 2016 (2016): 1–8. http://dx.doi.org/10.1155/2016/7518067.
Testo completoHU, Ju-Yun, and Won-Kee HONG. "Steel beam–column joint with discontinuous vertical reinforcing bars." JOURNAL OF CIVIL ENGINEERING AND MANAGEMENT 23, no. 4 (2017): 440–54. http://dx.doi.org/10.3846/13923730.2016.1210217.
Testo completoSelokar, Ashish, D. B. Goel, and Ujjwal Prakash. "A Comparative Study of Cavitation Erosive Behaviour of 23/8N Nitronic Steel and 13/4 Martensitic Stainless Steel." Advanced Materials Research 585 (November 2012): 554–58. http://dx.doi.org/10.4028/www.scientific.net/amr.585.554.
Testo completoHietala, Mikko, Antti Järvenpää, Markku Keskitalo, and Kari Mäntyjärvi. "Bending Strength of Laser-Welded Sandwich Steel Panels of Ultra-High Strength Steel." Key Engineering Materials 786 (October 2018): 286–92. http://dx.doi.org/10.4028/www.scientific.net/kem.786.286.
Testo completoKrstevska, Aleksandra, Maja Poser, and Filip Zdraveski. "Weldability between steel type 304H and steel type P91 for high temperature applications." Zavarivanje i zavarene konstrukcije 68, no. 4 (2023): 29–36. http://dx.doi.org/10.5937/zzk2301029k.
Testo completoYU, Z. Q., Y. K. HOU, S. H. LI, Z. Q. LIN, and W. G. ZHANG. "SURFACE DAMAGE BEHAVIOR OF GALVANIZED STEEL SHEETS IN FORMING PROCESS UNDER TENSION-BENDING." International Journal of Modern Physics B 24, no. 30 (2010): 5877–84. http://dx.doi.org/10.1142/s0217979210057481.
Testo completoBIBICU, ION. "Mössbauer studies on steel samples." Journal of Engineering Sciences and Innovation 6, no. 3 (2021): 289–306. http://dx.doi.org/10.56958/jesi.2021.6.3.7.
Testo completoYurianto, Yurianto, Sulardjaka Sulardjaka, Adi Widyanto Susilo, and Yanuar Padang. "COMPARISON OF THE STRUCTURE AND PROPERTIES BETWEEN SINGLE QUENCH+TEMPER AND DOUBLE QUENCH+TEMPER OF MEDIUMCARBON AND CARBONMANGANESE STEEL." Eastern-European Journal of Enterprise Technologies 5, no. 12 (107) (2020): 15–22. https://doi.org/10.15587/1729-4061.2020.214223.
Testo completoDarma, Eko, Jaka Muslim Nuranto, and Fajar Prihesnanto. "Comparative Investigation of the Tensile Strength of Steel Bars With and Without Couplers." E3S Web of Conferences 500 (2024): 03007. http://dx.doi.org/10.1051/e3sconf/202450003007.
Testo completoCampagnoli, Elena, Paolo Matteis, Giovanni M. M. Mortarino, and Giorgio Scavino. "Thermal Diffusivity of Traditional and Innovative Sheet Steels." Defect and Diffusion Forum 297-301 (April 2010): 893–98. http://dx.doi.org/10.4028/www.scientific.net/ddf.297-301.893.
Testo completoLi, Guannan, Xiaopei Guo, Tao Li, and Shuoyang Wang. "Development of low-cost weathering steel for photovoltaic supports." Metallurgical Research & Technology 120, no. 1 (2023): 115. http://dx.doi.org/10.1051/metal/2023009.
Testo completoKorchynsky, Michael. "Advanced Metallic Structural Materials and a New Role for Microalloyed Steels." Materials Science Forum 500-501 (November 2005): 471–80. http://dx.doi.org/10.4028/www.scientific.net/msf.500-501.471.
Testo completoKolařík, Ladislav, Miroslav Sahul, Marie Kolaříková, Martin Sahul, and Milan Turňa. "Resistance Spot Welding of Low Carbon Steel to Austenitic CrNi Stainless Steel." Advanced Materials Research 875-877 (February 2014): 1499–502. http://dx.doi.org/10.4028/www.scientific.net/amr.875-877.1499.
Testo completoLi, Zhuang, Di Wu, Wei Lv, Shao Pu Kang, and Zhen Zheng. "Effect of Rare Earth Elements on Machining Characteristics of Austenitic Stainless Steels without Lead Addition." Applied Mechanics and Materials 377 (August 2013): 128–32. http://dx.doi.org/10.4028/www.scientific.net/amm.377.128.
Testo completoHuang, Xuqiang, and Zhaoyang Lu. "Microstructure and Properties of Press-Bonded Dissimilar Stainless Steel and Mild Carbon Steel Ingots." Metals 12, no. 12 (2022): 2142. http://dx.doi.org/10.3390/met12122142.
Testo completoAhmed, A., S. N. Ghali, M. Eissa, and S. A. El Badry. "Influence of Partial Replacement of Nickel by Nitrogen on Microstructure and Mechanical Properties of Austenitic Stainless Steel." Journal of Metallurgy 2011 (November 16, 2011): 1–6. http://dx.doi.org/10.1155/2011/639283.
Testo completoAyer, Raghavan, and P. M. Machmeier. "TEM examination of hardening and toughening phenomena in a ultrahigh-strength steel." Proceedings, annual meeting, Electron Microscopy Society of America 52 (1994): 698–99. http://dx.doi.org/10.1017/s0424820100171225.
Testo completoQi, Liang, Ai Min Zhao, and Zheng Zhi Zhao. "Effect of Boron or Cuprum on Phase Transition and Mechanical Properties of High-Strength Steels for Oil Tank." Advanced Materials Research 233-235 (May 2011): 1063–66. http://dx.doi.org/10.4028/www.scientific.net/amr.233-235.1063.
Testo completoPark, Jeong Yeol, Byoung Koo Kim, Dae Geun Nam, and Myung Hyun Kim. "Effect of Nickel Contents on Fatigue Crack Growth Rate and Fracture Toughness for Nickel Alloy Steels." Metals 12, no. 2 (2022): 173. http://dx.doi.org/10.3390/met12020173.
Testo completo