Bibliografie tematiche / SYNCHRONUS MACHINE

Indice

  1. Articoli di riviste
  2. Tesi
  3. Libri
  4. Capitoli di libri
  5. Atti di convegni
  6. Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "SYNCHRONUS MACHINE"

Autore: Grafiati
Pubblicato: 11 settembre 2023
Ultima modifica: 25 luglio 2025

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "SYNCHRONUS MACHINE".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "SYNCHRONUS MACHINE"

1

Palka, Ryszard, Kamil Cierzniewski, Marcin Wardach, and Pawel Prajzendanc. "Research on Innovative Hybrid Excited Synchronous Machine." Energies 16, no. 18 (2023): 6600. http://dx.doi.org/10.3390/en16186600.

Testo completo
Abstract (sommario):
This paper presents research on an unconventional electric machine. It is a hybrid excited machine which includes the features of three types of machines: the Permanent Magnet Synchronous Machine, the Synchronous Machine, and the Synchronous Reluctance Machine. Therefore, a broad literature review related to the above-mentioned types of machines was constructed. The well-known Permanent Magnet assisted Synchronous Reluctance Machine joins features of Permanent Magnet Synchronous Machine and Synchronous Reluctance Machine topologies. This paper shows the results of the innovative design of the
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Podgornovs, Andrejs, and Anton Sipovics. "Electromechanical Battery, Electrical Machines Mass Functions Analysis." Scientific Journal of Riga Technical University. Power and Electrical Engineering 28, no. 1 (2011): 53–57. http://dx.doi.org/10.2478/v10144-011-0009-7.

Testo completo
Abstract (sommario):
Electromechanical Battery, Electrical Machines Mass Functions AnalysisIn this paper different types of electrical machines in electromechanical battery, were described. The most known manufactured battery data is composed. Three types of machines: synchronous machine with salient poles and electromagnetic excitation, with permanent magnets on rotor and reluctance synchronous machine were analyzed. For all types of machines, mass is function of general geometrical size of magnetic system and machines electrical power.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Juszczak, Ewa Napieralska, Daniel Roger, Krzysztof Komeza, Marcin Lefik, and Piotr Napieralski. "Architecture choices for high-temperature synchronous machines." Open Physics 18, no. 1 (2020): 683–700. http://dx.doi.org/10.1515/phys-2020-0154.

Testo completo
Abstract (sommario):
AbstractThe article proposes an analysis of the possible architectures of synchronous machines with an ability to operate at high temperatures of over 200°C in their environment. Two machine principles have been considered: the permanent magnet synchronous machine and the synchronous reluctance machine. The numerical analyses are carried out with 3D-coupled electromagnetic-fluid-thermal models; the electromagnetic one provides the local losses that give the input data to the coupled thermal-fluid analysis model for computing the temperatures inside the machines. The simulation results are used
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Lee, Oliver Mitchell, and Mohammadali Abbasian. "Reducing Rare-Earth Magnet Reliance in Modern Traction Electric Machines." Energies 18, no. 9 (2025): 2274. https://doi.org/10.3390/en18092274.

Testo completo
Abstract (sommario):
Currently, electric machines predominantly rely on costly rare-earth NdFeB magnets, which pose both economic and environmental challenges due to rising demand. This research explores recent advancements in machine topologies and magnetic materials to identify and assess promising solutions to this issue. The study investigates two alternative machine topologies to the conventional permanent magnet synchronous machine (PMSM): the permanent magnet-assisted synchronous reluctance machine (PMaSynRM), which reduces magnet usage, and the wound-field synchronous machine (WFSM), which eliminates magne
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Santhosh, G., K. Vani, B. Srikanth, and P. Pravalika. "Mitigation of Voltage Flicker at Smart Loads with Renewable (Wind) Energy in Distribution Systems." International Journal of Engineering and Advanced Technology (IJEAT) 9, no. 5 (2020): 607–12. https://doi.org/10.35940/ijeat.D7499.069520.

Testo completo
Abstract (sommario):
This activity handles displaying and furthermore control of astute tons for request reaction organization under improved invasion of reasonable power ages (RPGs) at desperate degree. The raised penetration of RPGs, particularly twist control at particular degree, is defined with harming impact on voltage impact. An irreversible magnet synchronous machine based volatile rate wind control transformation structure is planned with a breeze rate considering stochastic and furthermore routine effects. The recreated wind control directly into the flow structure produces stochastic and additionally co
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Tang, Min, Shao Hui Zhang, Yan Fei Shen, and Yong Li. "Impact of Wind Penetration Level on System Dynamic Performance." Applied Mechanics and Materials 459 (October 2013): 189–94. http://dx.doi.org/10.4028/www.scientific.net/amm.459.189.

Testo completo
Abstract (sommario):
Power system dynamic problem is the study which dealing with synchronism among interconnected machines. In any scenario all interconnected synchronous machines should remain in synchronism if the system is stable; i.e., they should all remain operating in parallel and at the same speed. Wind penetration level is affecting power system stability performance. This may result in oscillatory, but if the system is stable, these oscillations will be damped towards to stable operating condition. If the system is unstable, these oscillations will not be damped out and causes damage to synchronous gene
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Sellam, Abdelkrim, Boubakeur Dehiba, Mohamed B. Benabdallah, et al. "Vectorial Formalism of Polyphase Synchronous Machine With Permanents Magnets." Aceh International Journal of Science and Technology 2, no. 1 (2013): 1–7. http://dx.doi.org/10.13170/aijst.2.1.482.

Testo completo
Abstract (sommario):
Abstract- This paper presents a mathematical model that transforms the real machine to fictitious machines and our goal is to simulate these and see the behavior of these machines in load. The polyphase machines are developed mainly in the field of variable speed drives of high power because increasing the number of phases on the one hand allows to reduce the dimensions of the components in power modulators energy and secondly to improve the operating safety. By a vector approach (vector space), it is possible to find a set of single-phase machine and / or two-phase fictitious equivalent to po
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Zaghdoud, Bellal, and Abdallah Saadoun. "Inductances Calculation of Permanent Magnet Synchronous Machine." International Journal of Computer and Electrical Engineering 6, no. 3 (2014): 267–70. http://dx.doi.org/10.7763/ijcee.2014.v6.836.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Zhang, Zhiwei, and Libing Zhou. "Design And Rotor Geometry Analysis Of Permanent Magnet–Assisted Synchronous Reluctance Machines Using Ferrite Magnet." Journal of Electrical Engineering 66, no. 6 (2015): 311–16. http://dx.doi.org/10.2478/jee-2015-0051.

Testo completo
Abstract (sommario):
Abstract Various electric machines can be the candidate for electric vehicles applications, including induction machines, permanent magnet synchronous machines, switched reluctance machines, etc. Another class of machine, which has been relatively ignored, is synchronous reluctance machines. In order to enhance and increase torque density of pure synchronous reluctance machines, the low cost permanent magnet can be inserted into rotor lamination to contribute torque production, which is so-called permanent magnet-assisted synchronous reluctance machines. This paper presents the design and roto
Gli stili APA, Harvard, Vancouver, ISO e altri
10

S, E. Abonyi. "A New Hybrid Synchronous Reluctance Machine Capable of Ultra High Output Power." International Journal of Trend in Scientific Research and Development 2, no. 6 (2018): 884–94. https://doi.org/10.31142/ijtsrd18643.

Testo completo
Abstract (sommario):
A new hybrid synchronous reluctance machine capable of ultra high Xd Xq ratio output power has been studied. A d q model voltage and flux linkage of the hybrid synchronous reluctance machine has been idealized and developed. Also the impedance and current loci from steady state analysis of the machine was obtained. The effect of capacitor loading in the auxiliary winding was investigated. The power factor and torque developed in the hybrid synchronous reluctance machine was compared with the conventional synchronous reluctance machine. The hybridized synchronous reluctance machine improved the
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Tesi sul tema "SYNCHRONUS MACHINE"

1

Orciari, Luca. "Rotor position estimation of a bearingless permanent magnet synchronus motor by machine learning techniques." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019.

Cerca il testo completo
Abstract (sommario):
In this testis project, developed at the university of Bologna at LAR (Laboratory of Automation and Robotics), is studied the reconstruction of the rotor attitude of Bearingless Permanent Magnet Synchronous Motor (BPMSM), by processing the output of six hall effect sensor using a neural network to improve an already existing model-based reconstruction algorithm.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Rekioua, Toufik. "Contribution à la modélisation et à la commande vectorielle des machines synchrones à aimants permanents." Vandoeuvre-les-Nancy, INPL, 1991. http://docnum.univ-lorraine.fr/public/INPL_T_1991_REKIOUA_T.pdf.

Testo completo
Abstract (sommario):
L’objectif de ce travail, est de modéliser et d'étudier par simulation numérique différentes méthodes de commande directe du couple d'une machine synchrone à aimants permanents à distribution sinusoïdale suivant le principe de la commande vectorielle. L'étude comporte trois parties: la première est consacrée à la modélisation des machines synchrones à aimants permanents associées à des convertisseurs statiques: nous décrivons ensuite la méthode de simulation numérique effectuée au moyen d'un générateur de programme: GASPE; enfin dans la dernière partie, nous étudions trois méthodes de commande
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Wisniewski, Teodor. "Modélisation non-linéaire des machines synchrones pour l'analyse en régimes transitoires et les études de stabilité." Thesis, Université Paris-Saclay (ComUE), 2018. http://www.theses.fr/2018SACLC092/document.

Testo completo
Abstract (sommario):
Les travaux de recherche présentésdans cette thèse ont été effectués dans le cadred'une collaboration entre Leroy Somer et lelaboratoire de génie électrique et électronique deParis (GeePs). Ils ont pour objectif lessimulations des phénomènes observés en modetransitoire des machines électriques. Cessimulations sont particulièrement orientées parles nouvelles exigences issues du Grid Code pourles alternateurs connectés au réseau.Principalement, deux types de modèles ont étédéveloppés. Le premier se base sur unereprésentation de l’état magnétique de lamachine où chaque flux est exprimé en fonctio
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Koteich, Mohamad. "Modélisation et observabilité des machines électriques en vue de la commande sans capteur mécanique." Thesis, Université Paris-Saclay (ComUE), 2016. http://www.theses.fr/2016SACLC043/document.

Testo completo
Abstract (sommario):
Les stratégies de commande avancée des machines électriques nécessitent une connaissance précise de la position et/ou de la vitesse du rotor. Ces grandeurs mécaniques sont traditionnellement mesurées par des capteurs, ce qui augmente le coût et diminue la fiabilité et la robustesse du système. D’où l’importance de la commande sans capteurs mécaniques, dite commande sensorless : elle consiste à remplacer les capteurs physiques par un observateur d’état, qui estime les grandeurs mécaniques en se basant sur un modèle de la machine et à partir de ses entrées (tensions) et ses sorties (courants mes
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Mariani, Guilherme Bueno. "Machine synchrone à réluctance : modèles équivalents à réseau de réluctances pour la simulation et l’optimisation." Thesis, Université Grenoble Alpes (ComUE), 2016. http://www.theses.fr/2016GREAT021/document.

Testo completo
Abstract (sommario):
L’enjeu de la thèse concerne la modélisation électromagnétique des machines synchrones à réluctance, avec comme objectif final : obtenir un modèle suffisamment précis et rapide pour, d’une part, être capable de calculer les ondulations de couple et d’autre part servir pour de l’optimisation dimensionnelle et pouvoir être couplé à un logiciel de type circuit pour tester une loi de commande. Un modèle du type schéma réluctant a été mis en place petit à petit avec validations à chaque étape. La modélisation des échanges dans l’entrefer utilise en final une fonction originale (intégrale de Fermi-D
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Bernot, Alix. "Modélisation et optimisation d'une machine électrique homopolaire en poudre de fer." Thesis, CentraleSupélec, 2015. http://www.theses.fr/2015SUPL0025/document.

Testo completo
Abstract (sommario):
Cette thèse présente l’étude d’une machine électrique à stator à flux transverse à griffes. Après une étude du SMC et des structures à flux transverse, une structure associant un stator à griffes à un rotor à aimants permanents est choisie. Un modèle de la machine par réseau de réluctances est développé, en s’appuyant sur des simulations éléments finis. Il est ensuite amendé par l’introduction d’hypothèses d’inclinaison de flux dans l’entrefer, puis il est validé par le test d’un prototype. L’architecture est alors optimisée après une analyse détaillée de la circulation des flux, qui permet d’
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Hamida, Mohamed Assaad. "Commande robuste sans capteur mécanique de l'actionneur synchrone à pôles saillants." Ecole centrale de Nantes, 2013. http://www.theses.fr/2013ECDN0010.

Testo completo
Abstract (sommario):
Grace à ses avantages, la machine synchrone est de plus en plus utilisée dans de nombreux domaines (avionique, automobile,. . . ). Cette thèse traite le problème de la commande robuste non linéaire sans capteur de la machine synchrone à pôles saillants. Dans un premier temps, deux types d’observateurs non linéaires ont été élaborés pour reconstruire les grandeurs mécaniques afin de remplacer les capteurs matériels d’un part et pour estimer certains paramètres et perturbation d’autre part. Le but est de rendre les lois de commande sans capteur robustes vis-à-vis des variations paramétriques et
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Fellah, Mohamed-Karim. "Commande numérique industrielle des convertisseurs à thyristors d'une machine synchrone autopilotée." Vandoeuvre-les-Nancy, INPL, 1991. http://docnum.univ-lorraine.fr/public/INPL_T_1991_FELLAH_M_K.pdf.

Testo completo
Abstract (sommario):
Un des points importants de cette étude, qui s'inscrit dans le cadre d'une collaboration de recherche EDF-CEGELEC-CRAN, est la réalisation complète d'une commande numérique industrielle d'une machine synchrone autopilotée sur la base d'un cahier des charges présentant des contraintes en précision pour les angles de retard à l'amorçage et en dynamique de suivi fréquentiel. Une première partie de cette thèse contribue d'une manière importante à l'étude des phénomènes liés aux imperfections du réseau électrique d'alimentation, en particulier à l'extraction de la composante fondamentale d'un résea
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Voyant, Jean-Yves. "Calcul des performances d'une machine synchrone à poles saillants." Grenoble INPG, 1997. http://www.theses.fr/1997INPG0195.

Testo completo
Abstract (sommario):
Ce travail concerne les machines synchrones à excitation (rotor bobiné). Leur modélisation est effectuée sous forme analytique; elle peut être employée lors des phases d'étude et de conception de ces machines (par exemple, pour la prédétermination des formes d'ondes et des pertes fer). Le premier chapitre présente les véhicules électriques et les particularités de leur chaîne de traction. Nous en déduisons ensuite les contraintes qui influent sur les paramètres magnétiques de ces machines. La méthode de calcul utilisée est détaillée dans le deuxième chapitre. Celle-ci permet d'analyser les eff
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Colle, Alexandre. "Étude d’une machine supraconductrice à flux axial pour une application aéronautique." Electronic Thesis or Diss., Université de Lorraine, 2020. http://www.theses.fr/2020LORR0036.

Testo completo
Abstract (sommario):
Le monde s’électrifie et plus particulièrement le monde du transport. En cause le réchauffement climatique et la pollution atmosphérique, qui promeut l’énergie électrique comme solution de la transition énergétique. L’électricité est de plus en plus un facteur de décarbonation avec les énergies renouvelables. De plus, l’utilisation de cette énergie est efficace. Le rendement des moteurs électriques peut être supérieur à 90 % contre 30 % pour les moteurs thermiques. Si la possibilité de transporter un grand nombre de passager au sol avec l’énergie électrique est une réalité, il en est autrement
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Libri sul tema "SYNCHRONUS MACHINE"

1

Souissi, Amal, Imen Abdennadher, and Ahmed Masmoudi. Linear Synchronous Machines. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-0423-1.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Wu, Yung-Tsun. Monitoring of a synchronous machine. University of Manchester, 1993.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Kerszenbaum, Isidor. Inspection of large synchronous machines: Checklists, failure identification, and troubleshooting. IEEE Press, 1996.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Lupkin, V. M. Analiz rezhimov sinkhronnoĭ mashiny metodami Li͡a︡punova. Ėnergoatomizdat, Leningradskoe otd-nie, 1991.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Kaukonen, Jukka. Salient pole synchronous machine modelling in an industrial direct torque controlled drive application. Lappeenranta University of Technology, 1999.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Szaflarski, Aleksander. Dwustronnie zasilana maszyna pierścieniowa w warunkach pracy synchronicznej. Wydawn. Politechniki Poznańskiej, 1997.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

IEEE Electric Machinery Committee., ed. IEEE guide, test procedures for synchronous machines. Institute of Electrical and Electronics Engineers, 1996.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Luukko, Julius. Direct torque control of permanent magnet synchronous machines-analysis and implementation. Lappeenranta University of Technology, 2000.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Smirnov, Aleksandr. Electric drive with contactless synchronous motors. INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1192105.

Testo completo
Abstract (sommario):
Contactless synchronous machines are considered, classification, description of structures, construction of analytical and numerical models for research calculations and design of inductor motors with electromagnetic excitation and with excitation from permanent magnets are given. Examples of design and research calculations of the operation of a synchronous drive of automation systems by means of a computational experiment are given.
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Zieliński, Piotr. Prądnice synchroniczne o magnesach trwałych z rozszczepionymi biegunami. Oficyna Wydawnicza Politechniki Wrocławskiej, 1999.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Capitoli di libri sul tema "SYNCHRONUS MACHINE"

1

Elgerd, Olle I., and Patrick D. van der Puije. "Synchronous Machine." In Electric Power Engineering. Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5997-9_4.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Hsieh, Harry, Felice Balarin, and Alberto Sangiovanni-Vincentelli. "Codesign Finite State Machines." In Synchronous Equivalence. Springer US, 2001. http://dx.doi.org/10.1007/978-1-4615-1659-0_3.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Edwards, J. D. "Synchronous Machines." In Electrical Machines and Drives. Macmillan Education UK, 1991. http://dx.doi.org/10.1007/978-1-349-21313-9_5.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Warnes, Lionel. "Synchronous machines." In Electronic and Electrical Engineering. Macmillan Education UK, 1998. http://dx.doi.org/10.1007/978-1-349-15052-6_18.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Warnes, Lionel. "Synchronous machines." In Electronic and Electrical Engineering. Macmillan Education UK, 2003. http://dx.doi.org/10.1007/978-0-230-21633-4_18.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Gerling, Dieter. "Synchronous Machines." In Electrical Machines. Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-17584-8_5.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Le Doeuff, René, and Mohamed El Hadi Zaïm. "Synchronous Machines." In Rotating Electrical Machines. John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118620649.ch3.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Vukosavic, Slobodan N. "Synchronous Machines." In Electrical Machines. Springer New York, 2012. http://dx.doi.org/10.1007/978-1-4614-0400-2_18.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Gieras, Jacek F. "Synchronous Machines." In Electrical Machines. CRC Press, 2016. http://dx.doi.org/10.1201/9781315371429-7.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Gönen, Turan, and Ali Mehrizi-Sani. "Synchronous Machines." In Electrical Machines and Their Applications, 3rd ed. CRC Press, 2024. http://dx.doi.org/10.1201/9781003129745-7.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "SYNCHRONUS MACHINE"

1

Willich, Viktor, Max Hullmann, Robert Nelles, Thomas Hubert, Axel Mertens, and Bernd Ponick. "Impact of Interleaved Inverter Operation on the Machine Losses of Dual Three-Phase Synchronous Machines." In 2024 International Symposium on Power Electronics, Electrical Drives, Automation and Motion (SPEEDAM). IEEE, 2024. http://dx.doi.org/10.1109/speedam61530.2024.10609113.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Rafin, S. M. Sajjad Hossain, Ahmed M. Ibrahim, and Osama A. Mohammed. "Hybrid Sub-Harmonic Synchronous Machines." In 2025 International Applied Computational Electromagnetics Society Symposium (ACES). IEEE, 2025. https://doi.org/10.23919/aces66556.2025.11052541.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Ozdil, Ali, and Yunus Uzun. "Finite Element Analyses of a TLA-type Synchronus Reluctance Machine." In 2022 International Conference on Electrical, Computer, Communications and Mechatronics Engineering (ICECCME). IEEE, 2022. http://dx.doi.org/10.1109/iceccme55909.2022.9988209.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Unamuno, Eneko, Jon Are Suul, Marta Molinas, and Jon Andoni Barrena. "Comparative Eigenvalue Analysis of Synchronous Machine Emulations and Synchronous Machines." In IECON 2019 - 45th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2019. http://dx.doi.org/10.1109/iecon.2019.8927826.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Vania, A., P. Pennacchi, and S. Chatterton. "Dynamic Effects Caused by the Non-Linear Behavior of Oil-Film Journal Bearings in Rotating Machines." In ASME Turbo Expo 2012: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/gt2012-69457.

Testo completo
Abstract (sommario):
Many common faults and malfunctions in rotating machines mainly cause synchronous vibrations (1X). Very high 1X vibration levels can occur, in case of severe faults. Large journal orbits inside oil-film journal bearings may generate non-linear effects in the oil-film forces, whose presence can be detected by means of the appearance of not negligible super-synchronous vibrations of the shafts. In this paper, a model-based method has been used to study the effects of non-linear oil-film forces on the machine dynamic behavior that may occur during runups and rundowns. In general, it is possible t
Gli stili APA, Harvard, Vancouver, ISO e altri
6

McElhinney, S. A., T. M. Jahns, and T. A. Shedd. "Centrifugally Pumped Thermosiphons for Motor Rotor Cooling." In ASME 2015 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems collocated with the ASME 2015 13th International Conference on Nanochannels, Microchannels, and Minichannels. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/ipack2015-48516.

Testo completo
Abstract (sommario):
This paper presents a detailed approach to provide improved cooling and heat spreading in electric machine rotors using centrifugally-pumped revolving thermosiphons. Design concepts are discussed that offer the following advantages: (1) high thermal performance across a wide range of operating points; (2) low-impedance heat paths; (3) excellent opportunities for integration with electric machine design for improved electromagnetic performance and structural design, as well as practical, cost-effective manufacturing. It takes advantage of centrifugal force to provide effective inertial pumping
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Walker, R. B., S. Perinpanayagam, and I. K. Jennions. "Localizing Unbalance Faults in Rotating Machinery." In ASME Turbo Expo 2013: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/gt2013-94455.

Testo completo
Abstract (sommario):
Excessive levels of unbalance in rotating machinery continue to contribute to machine downtime and unscheduled and costly maintenance actions. Whilst unbalance as a rotordynamic fault has been studied in great detail during the last century, the localization of unbalance within a complex rotating machine is today often performed in practice using little more than ‘rules of thumb’. In this work, localizing excessive unbalance has been studied from an experimental perspective through the use of two rotordynamic test rigs fitted with multiple disks. Sub-synchronous non-linear features in the freq
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Ma, Zhuoren, Ryan Arteaga, Muxuan Wang, and Christine Silveira. "Machine Learning to optimize Permanent Magnet Synchronous Machines." In 2020 IEEE 2nd International Conference on Civil Aviation Safety and Information Technology (ICCASIT). IEEE, 2020. http://dx.doi.org/10.1109/iccasit50869.2020.9368634.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Drobnič, Klemen, and Rastko Fišer. "Unbalanced Magnetic Pull in Dual Three-Phase Machine." In XXVIII. Symposium Electromagnetic Phenomena in Nonlinear Circuits (EPNC 2024). University of Maribor Press, 2025. https://doi.org/10.18690/um.feri.4.2025.35.

Testo completo
Abstract (sommario):
This paper examines the emergence of unbalanced magnetic pull (UMP) in dual three-phase permanent magnet synchronous machines (DTM) during post-fault (PFO) and synthetic loading operation (SLO). Through FEM (finite element method) simulations, the paper reveals that UMP arises due to interactions between field harmonics with differing spatial orders, specifically the 4th and 5th harmonics during PFO and SLO. The presence of both odd and even harmonics in the machine's field spectrum is identified as a critical factor in UMP generation. The simulation results confirm that while UMP in DTM incre
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Li, Tao, Bitan Wang, Chengwu Diao, and Wenliang Zhao. "Design and Optimization of Low-Budget Yokeless and Segmented Armature Electrical Machine." In SAE 2024 Vehicle Powertrain Diversification Technology Forum. SAE International, 2025. https://doi.org/10.4271/2025-01-7055.

Testo completo
Abstract (sommario):
<div class="section abstract"><div class="htmlview paragraph">This paper designs a low-budget yokeless and segmented armature (YASA) axial flux permanent magnet synchronous machine, which replaces some of the PMs attached to the rotor with silicon steel plates. For the purpose of checking the effectiveness of the proposed machine, the equivalent magnetic circuits of the typical and proposed YASA machines are first compared and analyzed, and then the models of the two machines are constructed and simulated. The results prove that the proposed YASA machine significantly reduces the q
Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "SYNCHRONUS MACHINE"

1

Snyder, Lawrence. A Taxonomy of Synchronous Parallel Machines. Defense Technical Information Center, 1988. http://dx.doi.org/10.21236/ada204256.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Du, Wei, Sebastian Achilles, Deepak Ramasubramanian, et al. Virtual Synchronous Machine Grid-Forming Inverter Model Specification (REGFM_B1). Office of Scientific and Technical Information (OSTI), 2024. http://dx.doi.org/10.2172/2376832.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Iyer, Lakshmi. Wound-Field Synchronous Machine-System Integration toward 8X Power Density and Commercialization. Office of Scientific and Technical Information (OSTI), 2023. http://dx.doi.org/10.2172/2205144.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Ye, Z. Study and Development of Anti-Islanding Control for Synchronous Machine-Based Distributed Generators: November 2001--March 2004. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/881311.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Brown, Ian, and Daniel Ludois. Wound Field and Hybrid Synchronous Machines for EV Traction with Brushless Capacitive Rotor Field Excitation (Final Report). Office of Scientific and Technical Information (OSTI), 2021. http://dx.doi.org/10.2172/1837809.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Ti possono interessare anche gli elenchi estesi di opere sul tema "SYNCHRONUS MACHINE":
Articoli di riviste Tesi Libri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia