Bibliografie tematiche / Technology bundle

Indice

Articoli di riviste
Tesi
Libri
Capitoli di libri
Atti di convegni
Rapporti di organizzazioni

Letteratura scientifica selezionata sul tema "Technology bundle"

Autore: Grafiati

Pubblicato: 10 dicembre 2022

Ultima modifica: 28 gennaio 2023

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Technology bundle".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Technology bundle"

Miller, N. J., T. W. Griffin, J. Bergtold, I. A. Ciampitti e A. Sharda. "Farmers’ Adoption Path of Precision Agriculture Technology". Advances in Animal Biosciences 8, n. 2 (1 giugno 2017): 708–12. http://dx.doi.org/10.1017/s2040470017000528.

Testo completo

Abstract (sommario):

Precision agriculture technologies have been adopted individually and in bundles. A sample of 348 Kansas Farm Management Association farm-level observations provides insight into technology adoption patterns of precision agriculture technologies. Estimated transition probabilities shed light on how adoption paths lead to bundling of technologies. Three information intensive technologies were assigned to one of eight possible bundles, and the sequence of adoption was examined using Markov transition processes. The probability that farms remain with the same bundle or transition to a different bundle by the next time period are reported. Farms with the complete bundle of all three technologies were likely to persist with their current technology.

Gli stili APA, Harvard, Vancouver, ISO e altri

Amin, Abu Bony, Syed Muhammad Shakil e Muhammad Sana Ullah. "A Theoretical Modeling of Adaptive Mixed CNT Bundles for High-Speed VLSI Interconnect Design". Crystals 12, n. 2 (27 gennaio 2022): 186. http://dx.doi.org/10.3390/cryst12020186.

Testo completo

Abstract (sommario):

The aroused quest to reduce the delay at the interconnect level is the main urge of this paper, so as to come across a configuration of carbon nanotube (CNT) bundles, namely, squarely packed bundles of mixed CNTs. The demonstrated approach in this paper makes the mixed CNT bundle adaptable to adopt for high-speed very-large-scale integration (VLSI) interconnects with technology shrinkage. To reduce the delay of the proposed configuration of the mixed CNT bundle, the behavioral change of resistance (R), inductance (L), and capacitance (C) has been observed with respect to both the width of the bundle and the diameter of the CNTs in the bundle. Consequently, the performance of the modified bundle configuration is compared with a previously developed configuration, namely, squarely packed bundles of dimorphic MWCNTs in terms of propagation delay and crosstalk delay at local-, semiglobal-, and global-level interconnects. The proposed bundle configuration is, ultimately, enacted as the better one for 32-nm and 16-nm technology nodes, and is suitable for 7-nm nodes as well.

Gli stili APA, Harvard, Vancouver, ISO e altri

Li, Lei, Li Chen e Jin Chao Li. "Numerical Generation Technology for Three-Dimensional Structure of High-Performance Fiber Bundle". Advanced Materials Research 332-334 (settembre 2011): 1024–27. http://dx.doi.org/10.4028/www.scientific.net/amr.332-334.1024.

Testo completo

Abstract (sommario):

The three-dimensional structure of high-performance fiber bundles are of paramount importance for their study in lateral compression mechanism. Modeling of their true morphologies is still fields of focus research, yet to be exhausted. In this paper, ANSYS were utilized to develop three-dimensional numerical model of fiber bundle on the computer in the way of simulation. This approach is enabled by the finite element packages. It is possible to simulate the true material morphology directly. The key issues of the simulation are to keep fiber volume fraction always a constant value and to ensure no intersection between fibers. This work can simulate the stochastic generation-growth of high-performance fiber bundle and reproduce morphology of fiber bundle on micron scale well and thereby provide reliable information for the study on the lateral compression mechanism in the future.

Gli stili APA, Harvard, Vancouver, ISO e altri

Griffin, Terry W., Noah J. Miller, Jason Bergtold, Aleksan Shanoyan, Ajay Sharda e Ignacio A. Ciampitti. "Farm’s Sequence of Adoption of Information-intensive Precision Agricultural Technology". Applied Engineering in Agriculture 33, n. 4 (2017): 521–27. http://dx.doi.org/10.13031/aea.12228.

Testo completo

Abstract (sommario):

Abstract. Precision agriculture (PA) has been commercially available for decades, however only specific technologies have been readily adopted. The overall goal of this study was to provide information of the historical changes (from 2000 to 2016), current status of PA utilization, and sales expectations in the next time period. Within this overarching objective, specific goals included 1) determining the specific technologies that farmers adopt and 2) estimating the probability of transitioning from one bundle of PA technologies to another. The three information-intensive technologies included: 1) yield monitor (YM) with or without GNSS 2) variable rate (VR) application of inputs, and 3) precision soil sampling (PSS). Combinations of these three technologies in addition to a possible “no technology adopted” response resulted in eight categories of PA technology bundles. Each year, farms were classified as having one of these eight possible bundles of PA technology. Adoption of PA technologies has increased over time, with the use of only YMs and the bundle of all three PA technologies (YM, PSS, and VR) as the two primary bundles being adopted. When only VR was adopted, there was a 47% probability that the farm would add a YM by next year. When a farm used YM, VR, and PSS, there was a 99% probability that a farm would continue using the bundle in the following year. The results are useful for farmers, extension professionals, and policymakers to understand prior adoption paths for bundles of PA technology. Future steps can connect this database on adoption of PA technology with farm meta-descriptors such as acreage, type of crop, rotation, other relevant management practices, and financial variables so to better understand how farmers are integrating technologies into their farming operations. Keywords: Adoption, Information-intensive, Markov chain, Precision agriculture, Sequential, Site specific, Soil sampling, Transition probability, Variable rate, Yield monitor.

Gli stili APA, Harvard, Vancouver, ISO e altri

Abdul Kadir, Kureshi, e Mohd Hasan. "Performance Optimization and Comparison of CNT Interconnect with Copper at VDSM Technology". INTERNATIONAL JOURNAL OF MANAGEMENT & INFORMATION TECHNOLOGY 6, n. 2 (15 ottobre 2013): 826–34. http://dx.doi.org/10.24297/ijmit.v6i2.3812.

Testo completo

Abstract (sommario):

As the CMOS process technology continues to scale, standard copper (Cu) interconnect will become a major hurdle for the best performance at very deep submicron (VDSM) technology node. The carbon nanotube (CNT) bundles have potential to provide an attractive solution for the higher resistivity and electromigration problems faced by traditional copper interconnects in VDSM technology node. This paper presents important guidelines to minimize the resistance, capacitance and inductance of a mixed CNT bundle interconnect for achieving best performance. The performance of mixed CNT bundle and copper is then compared at local and global interconnects level at 22nm technology node. HSPICE simulations carried out using Berkeley predictive technology model (BPTM) at an operating frequency of 1GHz, shows that for interconnect length of 1000um, the mixed CNT and optimized CNT (CNT_Opt) bundles are 1.98X and 2.20X faster, 74% and 84% more energy efficient respectively than the Copper interconnects.

Gli stili APA, Harvard, Vancouver, ISO e altri

Fox, Ross J., Christopher D. Harner, Masataka Sakane, Gregory J. Carlin e Savio L.-Y. Woo. "Determination of the In Situ Forces in the Human Posterior Cruciate Ligament Using Robotic Technology". American Journal of Sports Medicine 26, n. 3 (maggio 1998): 395–401. http://dx.doi.org/10.1177/03635465980260030901.

Testo completo

Abstract (sommario):

We examined the in situ forces in the posterior cruciate ligament as well as the force distribution between its anterolateral and posteromedial bundles. Using a robotic manipulator in conjunction with a universal force-moment sensor system, we applied posterior tibial loads from 22 to 110 N to the joint at 0° to 90° of knee flexion. The magnitude of the in situ force in the posterior cruciate ligament and its bundles was significantly affected by knee flexion angle and posterior tibial loading. In situ forces in the posterior cruciate ligament ranged from 6.1 6.0 N under a 22-N posterior tibial load at 0° of knee flexion to 112.3 28.5 N under a 110-N load at 90°. The force in the posteromedial bundle reached a maximum of 67.9 31.5 N at 90° of knee flexion, and the force in the anterolateral bundle reached a maximum of 47.8 23.0 N at 60° of knee flexion under a 110-N load. No significant differences existed between the in situ forces in the two bundles at any knee flexion angle. This study provides insight into the knee flexion angle at which each bundle of the posterior cruciate ligament experiences the highest in situ forces under posterior tibial loading. This information can help guide us in more accurate graft placement, fixation, and tensioning, and serve as an assessment of graft performance.

Gli stili APA, Harvard, Vancouver, ISO e altri

Kuo, Chih-Wei. "Hard or Soft Science? Conceptualizing Educational Technology through a Lexical Bundle Analytical Approach". Education and Linguistics Research 3, n. 1 (9 aprile 2017): 43. http://dx.doi.org/10.5296/elr.v3i1.10503.

Testo completo

Abstract (sommario):

An ongoing discussion on the disciplinary nature of educational technology has been taking place for years. Some view this discipline from the perspective of instructional design and implementation, whereas others conceptualize it from the perspective of media, tool, and system. This study examined educational technology from the perspective of language use by empirically investigating a special sequence of words, referred to as lexical bundles, in educational technology research articles. It aims to capture the distinctive nature of educational technology as soft technology and examine possible associations of educational technology with relevant disciplines. Employing a text analysis tool of AntConc 3.4.3, the researcher compiled a corpus encompassing 323 research articles from six journals with approximately 2.1 million words to identify lexical bundles. All identified bundles were analyzed and further compared with past relevant studies based on the number of different bundles, the content of bundles, and the grammatical structure of bundles. It was found that educational technology as an inter-discipline resembles much more soft science fields in terms of the content and structural categories of bundles. This study not only contributes to a better conceptual understanding of the nature of educational technology but offers a pedagogically beneficial bundle list for informing academic writing instruction in this field.

Gli stili APA, Harvard, Vancouver, ISO e altri

Barankova, Inna I., Uliana V. Mikhailova e Olga B. Kalugina. "Induction Heating Technology for Steel Wire Processing". Solid State Phenomena 284 (ottobre 2018): 610–14. http://dx.doi.org/10.4028/www.scientific.net/ssp.284.610.

Testo completo

Abstract (sommario):

This article discusses the induction heating application features in metallurgical industry for previously unused objects, such as wire coils and wire rod bundles. The analysis of international trends and a forecast of the induction heating application shows a steady expansion of the induction technologies in the metallurgical industry. The article considers the advantages of induction heating in comparison to other competitive technologies. Heat treatment in electrotechnological induction plants is determined by the interconnected electric and thermophysical processes taking place in them, the complex nature of the internal heat sources distribution, the dependence of the distribution pattern of the induction plant on the temperature of the products being processed. It is shown that the investigation results of the induction heating method influence the temperature and time factors in the formation of the structure, the increase in the uniformity of heating, and the quality of the heat treatment of steel wire and wire rod buntle, taking into account the stated technological task. The efficiency estimation of application of medium and high-frequency induction heating of steel wire of various diameters is given. Evaluation of the efficiency improving of the induction heating device, when the heat treatment simultaneous multiple strands of steel wire of equal diameter, united in a bundle, is given.

Gli stili APA, Harvard, Vancouver, ISO e altri

Bernauer, Otto. "Optical waveguides using fiber bundle technology". Optik & Photonik 6, n. 2 (maggio 2011): 47–48. http://dx.doi.org/10.1002/opph.201190331.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Heeler, Roger M., Adam Nguyen e Cheryl Buff. "Bundles = discount? Revisiting complex theories of bundle effects". Journal of Product & Brand Management 16, n. 7 (6 novembre 2007): 492–500. http://dx.doi.org/10.1108/10610420710834940.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Tesi sul tema "Technology bundle"

Kallin, Niklas. "Computation of posterior covariances of object points in bundle adjustment". Thesis, Umeå universitet, Institutionen för datavetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-163114.

Testo completo

Abstract (sommario):

Bundle adjustment (BA) is a photogrammetric method for optimal estimation of parameters from image measurements. The parameters include 3D coordinates of objects points (OP). The result of the bundle adjustment process is a vector of estimates and its covariance matrix, C. The elements of this matrix contain quality indicators of the estimation. By looking for the elements with the highest values, the most problematic parameter can be removed. The matrix C is created by inversion of the systems normal matrix, N, which is sparse. However, inverting N directly is intractable since the inverse is generally dense. In many cases, only the diagonal blocks of C are needed. This thesis evaluates algorithms that compute only the 3-by-3 blocks of C that correspond to the OPs. The algorithms utilize the Cholesky factor for efficiency. The results show that if N is permuted into an arrowhead shape and the sparsity of the Cholesky factor is properly exploited, then it is possible to efficiently compute the 3-by-3 diagonal blocks of the posterior covariance matrix.

Gli stili APA, Harvard, Vancouver, ISO e altri

Krempser, Paula. "Trauma vascular periférico em urgência: impacto após implantação de bundle". Universidade Federal de Juiz de Fora, 2014. https://repositorio.ufjf.br/jspui/handle/ufjf/773.

Testo completo

Abstract (sommario):

Submitted by Renata Lopes (renatasil82@gmail.com) on 2016-02-17T16:22:42Z No. of bitstreams: 1 paulakrempser.pdf: 3199319 bytes, checksum: 0c2d5739e26106f9b0a2def014ce4092 (MD5)
Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2016-02-26T13:08:53Z (GMT) No. of bitstreams: 1 paulakrempser.pdf: 3199319 bytes, checksum: 0c2d5739e26106f9b0a2def014ce4092 (MD5)
Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2016-02-26T13:09:14Z (GMT) No. of bitstreams: 1 paulakrempser.pdf: 3199319 bytes, checksum: 0c2d5739e26106f9b0a2def014ce4092 (MD5)
Made available in DSpace on 2016-02-26T13:09:14Z (GMT). No. of bitstreams: 1 paulakrempser.pdf: 3199319 bytes, checksum: 0c2d5739e26106f9b0a2def014ce4092 (MD5) Previous issue date: 2014-08-08
CAPES - Coordenação de Aperfeiçoamento de Pessoal de Nível Superior
Pesquisa quantitativa que objetivou criar e aplicar na prática clínica um “bundle de prevenção de trauma vascular periférico” para abordagem do processo de punção vascular periférica em serviço de urgência e emergência nas situações em que o vaso foi utilizado para fins de infusão de volumes e fármacos intravasculares e analisar sua efetividade na prática clínica comparando a incidência de trauma vascular antes e após intervenção educativa. O cenário da investigação foi um serviço de urgência e emergência com participação de pessoas de ambos os gêneros e maiores de 18 anos de uma cidade mineira. Foram utilizados multimétodos e técnicas para identificar a ocorrência de manifestações de traumas vasculares decorrentes de punções periféricas (técnicas semiológicas, mensurações e registros fotográficos) a partir da construção de duas coortes intercaladas por intervenção educativa. Dados analisados por estatística descritiva, inferencial e correlacional. Atendidos todos os requisitos éticos e legais de pesquisa envolvendo seres humanos. Avaliadas 244 e 191 sítios de punções observados no setor de urgência e emergência com a rotina da instituição e após sua modificação, respectivamente. Na primeira etapa foram observadas em 143 casos (58,6%) de trauma vasculares periféricos distribuídos em: dor (49,6%); alteração da cor da pele (17,6%) dos tipos, equimose (8,6%), hematoma (1,2%) e eritema (13,5%); diminuição da capacidade funcional do membro puncionado ou parte dele (7%), alteração da integridade da pele dos tipos: edema (23%); endurado (15,2%); visualização da solução de continuidade (12,7%); visualização de secreção no sítio de inserção do cateter (0,8%) e alteração da temperatura local (10,2%). O bundle de “prevenção de traumas vasculares periféricos” foi criado baseado em evidências científicas e adaptáveis ao perfil de pessoas que tiveram seus vasos puncionados abrangendo as etapas de fixação, manutenção e remoção do cateter do interior do vaso sanguíneo. Ele foi apresentado à equipe de enfermagem por meio de processo educativo cuja abordagem contemplou: motivação inicial a partir dos índices de incidências de traumas vasculares periféricos, estratégias para preveni-los e ações para diminuir as iatrogenias. Posteriormente o bundle foi incorporado à rotina institucional nos setores investigados, sendo avaliados 191 sítios de punções nos quais ele foi utilizado. Foram observados 60 casos (31,4%) de trauma vasculares periféricos com o uso do bundle: dor (21,5%); alteração da cor da pele (7,3%) dos tipos, equimose (1,6%), hematoma (2,1%) e eritema (6,3%); a diminuição da capacidade funcional do membro puncionado ou parte dele (0,5%), alteração da integridade da pele dos tipos: edema (4,7%); endurado (6,8%); visualização da solução de continuidade (3,7%); visualização de secreção no sítio de inserção do cateter (1%) e alteração da temperatura local (1%). A criação e aplicação de um “bundle de prevenção de trauma vascular periférico” para abordagem do processo de punção vascular periférica em serviço de urgência e emergência mostrou-se eficiente a ponto de reduzir a incidência de trauma vascular quando comparada no período antes (58,6%) e após intervenção educativa do conteúdo do bundle (31,4%). Os tipos de manifestações de trauma identificados nos dois momentos retrataram problemas de enfermagem presentes na prática clínica de enfermeiros para os quais a presente investigação traz como contribuição sua identificação e condutas cuja efetividade foi comprovada a partir da padronização de condutas simples, de baixo custo operacional e que permitiram obter resultados capazes de qualificar o cuidado de enfermagem na medida em que são passíveis de serem abordados com condutas de enfermagem.
Quantitative research aimed to create and apply in clinical practice a 'bundle of peripheral vascular trauma prevention "approach to the process of peripheral vascular puncture in urgent and emergency situations in the service in which the vessel was used for infusion volumes and intravascular drugs and analyze their effectiveness in clinical practice by comparing the incidence of vascular trauma before and after educational intervention. The setting of the research was an emergency service and emergency participation of people of both genders, sexes and over 18 years of a mining town. Multimethod and techniques were used to identify the occurrence of manifestations of peripheral vascular injuries from punctures (semiotic techniques, measurements and photographic records) from the construction of two cohorts interspersed with educational intervention. Data analyzed using descriptive, inferential and correlational statistics. Met all legal and ethical requirements for research involving humans. Evaluated 244 and 191 sites of punctures observed in the emergency care industry with the routine of the institution and after modification, respectively. In the first stage were observed in 143 cases (58.6%) of peripheral vascular trauma distributed as follows: pain (49.6%); the change of skin color (17.6%) types, ecchymosis (8.6%), hematoma (1.2%) and erythema (13.5%); decreased functional capacity of limb or punctured it (7%), the change of skin integrity types of edema (23%); induration (15.2%); visualization of interruption (12.7%); viewing secretion at the site of catheter insertion (0.8%) and the change in local temperature (10.2%). The bundle of "prevention of peripheral vascular trauma" was created based on scientific and adaptable to people who had their punctured vessels comprising the steps of fixing, maintenance and removal of the catheter into the blood vessel profile evidence. He was presented to the nursing staff through educational process whose approach included: initial motivation from the indices of incidence of peripheral vascular trauma, strategies to prevent them, and actions to reduce iatrogenic complications. The bundle was subsequently incorporated into the routine of institutional sectors investigated and evaluated 191 sites of punctures in which it was used. 60 cases (31.4%) of peripheral vascular trauma using the bundle were observed: pain (21.5%); changing the color of the skin (7.3%) types, ecchymosis (1.6%), hematoma (2.1%) and erythema (6.3%); decreased functional capacity of limb or punctured it (0.5%), the change of skin integrity types of edema (4.7%); induration (6.8%); visualization of a discontinuity (3.7%); viewing secretion at the site of catheter insertion (1%) and the change in local temperature (1%). The creation and implementation of a "bundle of peripheral vascular trauma prevention" approach to the punching process in peripheral vascular and emergency rescue service was efficient to the point of reducing the incidence of vascular trauma when compared with the period before (58, 6%) and after educational intervention bundle content (31.4%). The types of manifestations of trauma identified in two moments portrayed nursing problems present in clinical nursing practice for which the present investigation has as its contribution identification and ducts whose effectiveness has been proven through the standardization of simple pipelines, low operating cost and which achieved results that qualify the nursing care to the extent that they are capable of being dealt with nursing behaviors.

Gli stili APA, Harvard, Vancouver, ISO e altri

Peng, Anthony Wei. "A hair bundle proteomics approach to discovering actin regulatory proteins in inner ear stereocilia". Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/54588.

Testo completo

Abstract (sommario):

Thesis (Ph. D.)--Harvard-MIT Division of Health Sciences and Technology, 2009.
Cataloged from PDF version of thesis.
Includes bibliographical references (p. 137-154).
Because there is little knowledge in the areas of stereocilia development, maintenance, and function in the hearing system, I decided to pursue a proteomics-based approach to discover proteins that play a role in stereocilia function. I employed a modified "twist-off" technique to isolate hair bundle proteins, and I developed a method to purify proteins and to process them for analysis using multi-dimensional protein identification technology (MudPIT). The MudPIT analysis yielded a substantial list of proteins. I verified the presence of 21 out of 34 (62%) existing proteins known to be present in stereocilia. This provided strong evidence that my proteomics approach was efficient in identifying hair bundle proteins. Next, I selected three proteins and localized them to murine cochlear stereocilia. StarD10, a putative phospholipid binding protein, was detectable along the shaft of stereocilia. Nebulin, a putative F-actin regulator, was located toward the base of stereocilia. Finally, twinfilin 2, a putative modulator of actin polymerization, was found at the tips of stereocilia. In order to determine the function of twinfilin 2, I localized the protein predominately to the tips of shorter stereocilia where it is up-regulated during the final phase of elongation. When overexpressed, I found that twinfilin 2 causes a shortening of microvilli in LLC-PK1/CL4 cells and in native cochlear stereocilia. The main result of this thesis was determining the sub-cellular localization of three interesting proteins and functionally characterizing one protein. My thesis also confirmed the proteomics screen I developed as an efficient method for identifying proteins in stereocilia.
by Anthony Wei Peng.
Ph.D.

Gli stili APA, Harvard, Vancouver, ISO e altri

Kaiser, Anton. "Electronic assembly instructions and documentation for complex wire bundle assembly to aircrafts using Augmented Reality". Thesis, Linköpings universitet, Medie- och Informationsteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-144584.

Testo completo

Abstract (sommario):

Monteringsinstruktioner och dokumentation i förstärkt verklighet är en potentiell revolution för industriellt monteringsarbete. Att montören kan få virtuella instruktioner i en verklig kontext, samtidigt som montörens händer hålls fria för montering, skulle bland annat kunna bidra till kortare monteringstider, mer effektiv upplärning, bättre dokumentation och säkrare arbetsplatser. Syftet med examensarbetet som beskrivs i den här rapporten var att studera om och hur Combitech bör använda förstärkt verklighet, för kommunikation av monteringsinstruktioner och dokumentation för komplex montering av kablage till flygplan, samt vilka möjligheter och risker detta medför. I examensarbetet som beskrivs i den här rapporten genomfördes först en litteraturstudie som syftade till att identifiera hur företaget Combitech bör arbeta med förstärkt verklighet vid kabelmontering och dokumentation, vad som har gjorts tidigare inom området samt vilka möjligheter och utmaningar som finns inom området. Efter genomförd litteraturstudie tillämpades resultaten av litteraturstudien på ett verkligt fall. Fallstudien bestod av att implementera och utvärdera prototyper, för monteringsinstruktioner och dokumentation, för komplex montering av kablage till flygplan. Tre olika prototyper skapades och utvärderades i fallstudien, varav en skulle motsvara traditionella monteringsinstruktioner och de två andra skapades för förstärkt verklighet. Den första av två prototyper som skapades för förstärkt verklighet implementerades för Microsoft Hololens och den andra för projicerade monteringsinstruktioner. Utvärderingen genomfördes med sex stycken testpersoner med olika monteringserfarenhet. Resultaten från utvärderingen visade att monteringsinstruktionerna för Microsoft Hololens gav flest antal fel och längst monteringstid samt att de projicerade monteringsinstruktionerna gav minst antal fel och kortast monteringstid. En jämförelse mellan de tre prototyperna som utvärderades visar att de projicerade monteringsinstruktionerna i förstärkt verklighet gav minst antal fel och kortast monteringstid, hade bäst ergonomi, var roligast samt enklast att använda. Valet av metod för monteringsinstruktioner i förstärkt verklighet visade sig vara helt avgörande när resultaten från utvärderingen i fallstudien studerades. I jämförelsen mellan monteringsinstruktionerna i Microsoft Hololens och projicerade monteringsinstruktioner blir rekommendationen enkel, baserat på resultaten från utvärderingen av prototyperna. Väljer Combitech att ta steget till förstärkt verklighet bör de använda sig av projicerade monteringsinstruktioner, för komplex montering av kablage till flygplan i förstärkt verklighet.

Gli stili APA, Harvard, Vancouver, ISO e altri

Mollevik, Iris. "Bundle adjustment for large problems - The effect of a truncated Gauss-Newton method on performance and precision". Thesis, Umeå universitet, Institutionen för datavetenskap, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-155346.

Testo completo

Abstract (sommario):

We implement a truncated Gauss-Newton algorithm and apply it to the bundle adjustment problem in a photogrammetry application. The normal equations are solved approximately using the conjugate gradient method preconditioned with the incomplete Cholesky factor. Our implementation is compared to an exact Gauss-Newton implementation. Improvements in time performance are found in some cases. The observed relative errors in estimated parameters are of order 10^−10 or smaller. The preconditioner proves to be very important, as does the permutation of the Jacobian. Excluding the time to re-permute the Jacobian, execution times are lowered by up to 24%. The truncated algorithm is observed to improve performance for larger datasets but not for smaller ones.

Gli stili APA, Harvard, Vancouver, ISO e altri

Ogallo, Godfrey G. "Development of Remote Water Quality Monitoring System Using Disruption Tolerant Networking (DTN)". Ohio University / OhioLINK, 2016. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1452255796.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Kolesova, A. V. "Bungee jumping-technology for the bravest". Thesis, Sumy State University, 2014. http://essuir.sumdu.edu.ua/handle/123456789/45603.

Testo completo

Abstract (sommario):

Bungee jumping is an activity that involves jumping from a tall structure while connected to a large elastic cord. The tall structure is usually a fixed object, such as a building, bridge or crane; but it is also possible to jump from a movable object, such as a hot-air-balloon or helicopter, that has the ability to hover above the ground. The thrill comes from the free-falling and the rebound. When the person jumps, the cord stretches and the jumper flies upwards again as the cord recoils, and continues to oscillate up and down until all the kinetic energy is dissipated.

Gli stili APA, Harvard, Vancouver, ISO e altri

Hein, Bettina. "0 + 0 = 1 : the appliance model of selling software bundled with hardware". Thesis, Massachusetts Institute of Technology, 2007. http://hdl.handle.net/1721.1/39504.

Testo completo

Abstract (sommario):

Thesis (S.M.M.O.T.)--Massachusetts Institute of Technology, Sloan School of Management, Management of Technology Program, 2007.
Includes bibliographical references (leaves 95-103).
The business model of selling software bundled with hardware is called the appliance model. As hardware becomes less and less expensive and open source software is being offered for free, the traditional business model of selling packaged software is being threatened. This disruption in the software industry is forcing software vendors to consider other business models such as advertising-based, transaction-based, software-as-a-service or appliance-based models in order to create additional value for customers. Most of these models have existed in variants for decades but are now gaining in popularity due to factors such as changing cost structures or the Internet as a delivery channel. This thesis analyzes the economic drivers and barriers for the appliance model for both the consumer and enterprise software industry segments. Important drivers of the appliance model for both of these sectors are hardware commoditization, open source software and vertical integration in order to capture margins. In the enterprise software segment the complexity of traditional software integration and operation including unpredictability of total cost of ownership, rising IT personnel cost and maintenance fees are driving the adoption of the appliance model.
(cont.) In the consumer software segment, ease of use, limited battery life, disintermediated distribution and prestige are important economic factors. The appliance model also has a number of economic disadvantages that hinder its adoption. Among these are the additional competencies that a company needs to build, supply chain and distribution costs, as well as inflexibility and inconvenience for the customer. Decision criteria for companies considering adopting the appliance model are also discussed. Industry examples in the consumer and enterprise software segment are examined and specific companies are used as case studies. Among these are the digital music player, digital video recorder, router and enterprise search markets. The possible implementation paths for software companies transitioning to the appliance model are proposed and the virtual appliance model as a next adoption step is discussed.
by Bettina Hein.
S.M.M.O.T.

Gli stili APA, Harvard, Vancouver, ISO e altri

Östberg, Patrik. "Bungebråket : Analys av intresseavvägningar i tvisten om kalkbrytning på Bunge Ducker 1:64". Thesis, Högskolan i Gävle, Avdelningen för Industriell utveckling, IT och Samhällsbyggnad, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-25790.

Testo completo

Abstract (sommario):

Konflikten kring kalkbrytning på Bunge Ducker 1:64 har pågått i över 10 år och är ännu inte avgjord när detta examensarbete skrivs. Det geografiska område som berörs går även under benämningen Ojnare eller Ojnareskogen. Två riksintressen står emot varandra; värnandet om naturen och de värden som finns i den brytbara kalken. För domstolarna Miljödomstolen respektive Miljööverdomstolen blev tvisterna en övning i intresseavvägning. I uppsatsen analyseras hur avvägningen genomfördes i två domar som kom till motsatta domslut. Miljödomstolen avslog i en dom från 2009 Nordkalks begäran om tillstånd för kalkbrytning, domen överklagades och Miljööverdomstolen gav i en dom 2010 tillåtlighet. I uppsatsen analyseras även en del av de intresseavvägningar som olika sakägare gjort med speciellt fokus på de sakägare vars intresse inte är givet i och med den verksamhet man bedriver eller sektorsansvar, framförallt länsstyrelsen i Gotlands län och region Gotland. För att fördjupa analysen av länsstyrelsens och regionens beslutsprocess har semistrukturerade intervjuer genomförts med tjänstemän på respektive myndighet. Regeringen fattade i 2015 beslut att under pågående rättsprocesser göra Ojnare till Natura 2000-område. Detta beslut kommer också att analyseras i uppsatsen. I analysen av intresseavvägningarna kommer aggregationsträd och nyttodifferenser att användas så långt det bidrar till förståelse av skeendet.

Gli stili APA, Harvard, Vancouver, ISO e altri

Belley, Philippe. "La technologie dans le système de Mario Bunge et son application à l'ingénierie sociale : le cas du développement durable". Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp01/MQ56726.pdf.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Libri sul tema "Technology bundle"

Electude. Automotive Technology Online Bundle - 18 Months - Bundle. Electude International, 2022.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Wiley & Sons Inc. Holiday 2003 Dummies Technology Bundle. John Wiley & Sons, 2003.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Bundle: Milady's Standard Nail Technology + Workbook. Delmar Cengage Learning, 2010.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Rocca, Romalina, Arna Wesley, Michael McLean e Dave Ellis. Design and Technology Stage 6 Bundle. Cambridge University Press, 2020.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

International, Electude. Washington County Community College Custom Bundle. Electude International, 2021.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Tec-Ease. 2018 GD&T Hierarchy Workbook/Solutions Bundle. Tec-Ease, Incorporated, 2021.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Electude. Automotive Technology Online Bundle - 36 Months - Voucher. Electude International, 2022.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Electude. Automotive Technology Online Bundle - 24 Months - Voucher. Electude International, 2022.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Electude. Automotive Technology Online Bundle - 12 Months - Voucher. Electude International, 2022.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Electude. Automotive Technology Online Bundle - 6 Months- Voucher. Electude International, 2022.

Cerca il testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Più fonti

Capitoli di libri sul tema "Technology bundle"

Kuznicki, Jason. "The State Is a Bundle". In Technology and the End of Authority, 199–208. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-48692-5_9.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Morinaga, Hiroki, Hirohisa Baba, Marco Visentini-Scarzanella, Hiroshi Kawasaki, Ryo Furukawa e Ryusuke Sagawa. "Underwater Active Oneshot Scan with Static Wave Pattern and Bundle Adjustment". In Image and Video Technology, 404–18. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-29451-3_33.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Son, Minwoo, Dongkyoo Shin e Dongil Shin. "Research on Multi-Agent Service Bundle Middleware for Smart Space". In Rough Sets and Knowledge Technology, 618–25. Berlin, Heidelberg: Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/11795131_90.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Hess-Flores, Mauricio, Daniel Knoblauch, Mark A. Duchaineau, Kenneth I. Joy e Falko Kuester. "Ray Divergence-Based Bundle Adjustment Conditioning for Multi-view Stereo". In Advances in Image and Video Technology, 153–64. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-25367-6_14.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Kumbhare, Vijay Rao, Punya Prasanna Paltani e Manoj Kumar Majumder. "Signal Integrity Analysis for Diameter-Dependent Mixed Carbon Nanotube Bundle Interconnects". In Information and Communication Technology for Sustainable Development, 481–89. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-7166-0_48.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Patel, Tirth, Nishtha Diwanji, Michika Gayari, Himadri Patel, Kinjal Patel e Rutu Parekh. "Analysis and Simulation of Various Parameters of Mixed CNT Bundle for Interconnect Applications". In Sustainable Technology and Advanced Computing in Electrical Engineering, 1099–115. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-4364-5_78.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Krey, J., K. Friedrich e K. H. Schwalbe. "The Influence of Fiber Bundle Reinforcement on the Fracture Mechanical Behavior of Polycarbonate and Epoxy". In Developments in the Science and Technology of Composite Materials, 651–56. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1123-9_88.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Kora, Padmavathi, e K. Sri Rama Krishna. "Detection of Bundle Branch Block Using Bat Algorithm and Levenberg Marquardt Neural Network". In Proceedings of First International Conference on Information and Communication Technology for Intelligent Systems: Volume 1, 553–61. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-30933-0_55.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Hell, Wolfram, Kurt Bodewig, Ute Hammer, Christian Kellner, Clemens Klinke, Matthias Mück, Martin Schreiner, Felix Walz e Guido Zielke. "Vision Zero in Germany". In The Vision Zero Handbook, 1–21. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-23176-7_13-1.

Testo completo

Abstract (sommario):

AbstractVision Zero has a central role in traffic safety in Germany. Finally, it was even a relevant point in the coalition treaty from the Federal Governing Parties in the year 2018.It is a unifying theme for safety measures taken on the federal, state, and local levels and in private, nonprofit traffic safety organizations. In later years, cooperation between these different agents has been intensified. Evaluation and measurability are essential in the German approach to Vision Zero. One example of this is the statistical work performed every year to identify “zero cities,” i.e., cities that had zero road fatalities the previous year. A yearly award puts focus on cities that have a particularly long string of zero years, in relation to their size. This is performed on an international level, and cities around the world are incentivized by these recognitions. Munich is used as an example of a city that has recently stepped up its traffic safety work. The city has adopted Vision Zero and followed up this with intensified traffic safety work, including improved data collection, the identification of accident black spots, targeted measures to improve safety in these black spots, safety audits of new infrastructure plans, etc. Before the introduction of new traffic technologies which may have an impact on safety, in-depth technology assessment has to be performed. This is illustrated by an example in which sufficient prior technology assessment did not take place, namely the introduction of e-scooters in Germany. After their introduction, they have turned out to be significantly more dangerous than bicycles, as can be seen from the statistics of fatalities and severe injuries. Proposals are made for measures are needed to reverse this trend, including obligatory use of helmets. The dialogue with neighbor states is also essential. Here the Traffic Expert Society of Medical and Technical Biomechanics, gmttb (Germany, Austria, and Switzerland= D A CH), has initiated to discuss and bundle basic principles of the Vision Zero in three neighbor countries. To promote Vision Zero, gmttb also organizes interdisciplinary yearly conferences with experts from Austria (Vision Zero is a state philosophy) and Switzerland (here named Via Sicura) to bundle strength and adopt ideas together with Swedish and multinational experts. As well as a yearly gmttb Vision Zero Safety Award is granted to motivate people, organizations, and manufacturers to promote good ideas for better traffic safety.

Gli stili APA, Harvard, Vancouver, ISO e altri

Hell, Wolfram, Kurt Bodewig, Ute Hammer, Christian Kellner, Clemens Klinke, Matthias Mück, Martin Schreiner, Felix Walz e Guido Zielke. "Vision Zero in Germany". In The Vision Zero Handbook, 337–57. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-76505-7_13.

Testo completo

Abstract (sommario):

Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Technology bundle"

Hopkins, D. "Grand Banks Bundle". In Arctic Technology Conference. Offshore Technology Conference, 2016. http://dx.doi.org/10.4043/27373-ms.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Goodlad, Martin. "Bundle Technology For The Future". In SPE Offshore Europe Oil and Gas Conference and Exhibition. Society of Petroleum Engineers, 2013. http://dx.doi.org/10.2118/166561-ms.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Beckmann, Marvin M., Jim W. Riley, Bruce C. Volkert e John F. Chappell. "Troika- Towed Bundle Flowlines". In Offshore Technology Conference. Offshore Technology Conference, 1998. http://dx.doi.org/10.4043/8848-ms.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Maeyama, Hiroyuki, Kazuya Okubo e Toru Fujii. "Fiber Breakage in Plain Woven Glass Fabric Composites Under Tension/Shear Biaxial Cyclic Stress". In ASME 2001 Engineering Technology Conference on Energy. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/etce2001-17140.

Testo completo

Abstract (sommario):

Abstract Fiber breakage occurring in fiber bundles of plain-woven glass fabric composites is investigated under tension/shear biaxial cyclic stress. The experimental results show an existence of the strong effect of biaxial stress ratio on fiber breakage and its accumulation. Under pure tension (uniaxial) loading, the variation of fiber breakage ratio with respect to loading cycles is divided into two stages in the longitudinal fiber bundles. In the first stage, the fiber breakage scarcely occurs. In the final stage, fibers in a fiber bundle are broken remarkably. Under the biaxial cyclic stress, the fiber breakage in the longitudinal fiber bundle is observed in initial fatigue stage. In the case of the biaxial stress with large shear stress component, the fiber breakage is also observed in the transverse fiber bundle. The fiber breakage is accelerated by the combined stress with large shear stress component, which is called the shear constraint effect.

Gli stili APA, Harvard, Vancouver, ISO e altri

Janaushek, Marsie A., Savio L. Y. Woo, Akihiro Kanamori, Tracy M. Vogrin, Masayoshi Yagi e Christopher Harner. "The Biomechanical Analysis of a Double Bundle Posterior Cruciate Ligament Reconstruction Using Robotic Technology". In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-0359.

Testo completo

Abstract (sommario):

Abstract The PCL consists of two primary bundles, the anterolateral (AL) and posteromedial (PM). The AL bundle is larger, stiffer, and has a higher ultimate load (Harner, 1995), and has been the focus of PCL replacement surgery (Clancy, 1983). However, clinical outcomes of PCL reconstruction have been unsatisfactory (Lipscomb, 1993); which has led to the question of the advancement of a double bundle procedure in hopes to more accurately reproduce the PCL (Clancy, 1998). It was therefore the objective of this study to evaluate the biomechanics of a double bundle PCL reconstruction (PCL-2), and compare these results with those obtained for the intact knee as well as a single bundle PCL reconstruction (PCL-1). To study this, a robotic/universal force-moment sensor (UFS) testing system which measures the multiple degree of freedom (DOF) knee kinematics determines the in situ force in the ligaments (or replacement grafts) in response to external loading conditions was utilized. The hypothesis was that PCL-2 would improve knee kinematics and in situ forces to those of the intact knee throughout the range of knee flexion as compared to PCL-1.

Gli stili APA, Harvard, Vancouver, ISO e altri

Animashawun, Kolawole, e Martin Goodlad. "Pipeline Bundle Extended Length for Subsea Development". In Offshore Technology Conference. Offshore Technology Conference, 2016. http://dx.doi.org/10.4043/27110-ms.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Animashawun, Kolawole, e Martin Goodlad. "Extended Pipeline Bundle Length for Field Development". In Offshore Technology Conference Asia. Offshore Technology Conference, 2016. http://dx.doi.org/10.4043/26518-ms.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Zhan, Huan, Xingtao Yan, Aidong Zhang, Fu Li, Jianfeng Yang e Aoxiang Lin. "Line-Plane-Switching Infrared Fiber Imaging Bundle". In CLEO: Applications and Technology. Washington, D.C.: OSA, 2014. http://dx.doi.org/10.1364/cleo_at.2014.jth2a.24.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Chang, Jun, Kaiyuan Fan, Lingjie Wang, Guangwei Shi, Hongbo Wu e Yihan Jin. "Design of fiber bundle imaging system". In Optical Sensing and Imaging Technology and Application, a cura di Dong Liu, Haimei Gong, Mircea Guina e Jin Lu. SPIE, 2018. http://dx.doi.org/10.1117/12.2503451.

Testo completo

Gli stili APA, Harvard, Vancouver, ISO e altri

Hashimoto, S., Y. Liu, K. Asano, M. Mori, Y. Funahashi e Y. Fujishiro. "Power Generation Properties of a Micro Tubular SOFC Bundle Under Pressurized Conditions". In ASME 2008 6th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2008. http://dx.doi.org/10.1115/fuelcell2008-65125.

Testo completo

Abstract (sommario):

A micro tubular solid oxide fuel cell (SOFC) bundle was developed based on new concept. The anode-supported micro tubular SOFCs with the cell configuration, La0.6Sr0.4Co0.2Fe0.8 O3−δ (LSCF) – Ce0.9Gd0.1O2−δ (CGO) cathode / CGO electrolyte / Ni – CGO anode were fabricated and were bundled by a porous LSCF current collecting cube 1 cm on a side. The power generation test of the fabricated SOFC bundle was carried out under pressurized conditions. Using wet 30%H2 / N2 mixture gas and air, the cubic power density of the bundle at 500°C was 0.47 Wcm−3 at 0.4Acm−2, atmospheric pressure (0.1MPa). With increasing operating pressure, the performance has been improved, and the cubic power density finally reached to 0.66 Wcm−3 at 0.6MPa. Pressurization effect for the power improvement was brought about by the open circuit voltage enhancement and reduction of the polarization resistance.

Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Technology bundle"

Mahdavian, Farnaz. Germany Country Report. University of Stavanger, febbraio 2022. http://dx.doi.org/10.31265/usps.180.

Testo completo

Abstract (sommario):

Germany is a parliamentary democracy (The Federal Government, 2021) with two politically independent levels of 1) Federal (Bund) and 2) State (Länder or Bundesländer), and has a highly differentiated decentralized system of Government and administration (Deutsche Gesellschaft für Internationale Zusammenarbeit, 2021). The 16 states in Germany have their own government and legislations which means the federal authority has the responsibility of formulating policy, and the states are responsible for implementation (Franzke, 2020). The Federal Government supports the states in dealing with extraordinary danger and the Federal Ministry of the Interior (BMI) supports the states' operations with technology, expertise and other services (Federal Ministry of Interior, Building and Community, 2020). Due to the decentralized system of government, the Federal Government does not have the power to impose pandemic emergency measures. In the beginning of the COVID-19 pandemic, in order to slowdown the spread of coronavirus, on 16 March 2020 the federal and state governments attempted to harmonize joint guidelines, however one month later State governments started to act more independently (Franzke & Kuhlmann, 2021). In Germany, health insurance is compulsory and more than 11% of Germany’s GDP goes into healthcare spending (Federal Statistical Office, 2021). Health related policy at the federal level is the primary responsibility of the Federal Ministry of Health. This ministry supervises institutions dealing with higher level of public health including the Federal Institute for Drugs and Medical Devices (BfArM), the Paul-Ehrlich-Institute (PEI), the Robert Koch Institute (RKI) and the Federal Centre for Health Education (Federal Ministry of Health, 2020). The first German National Pandemic Plan (NPP), published in 2005, comprises two parts. Part one, updated in 2017, provides a framework for the pandemic plans of the states and the implementation plans of the municipalities, and part two, updated in 2016, is the scientific part of the National Pandemic Plan (Robert Koch Institut, 2017). The joint Federal-State working group on pandemic planning was established in 2005. A pandemic plan for German citizens abroad was published by the German Foreign Office on its website in 2005 (Robert Koch Institut, 2017). In 2007, the federal and state Governments, under the joint leadership of the Federal Ministry of the Interior and the Federal Ministry of Health, simulated influenza pandemic exercise called LÜKEX 07, and trained cross-states and cross-department crisis management (Bundesanstalt Technisches Hilfswerk, 2007b). In 2017, within the context of the G20, Germany ran a health emergency simulation exercise with representatives from WHO and the World Bank to prepare for future pandemic events (Federal Ministry of Health et al., 2017). By the beginning of the COVID-19 pandemic, on 27 February 2020, a joint crisis team of the Federal Ministry of the Interior (BMI) and the Federal Ministry of Health (BMG) was established (Die Bundesregierung, 2020a). On 4 March 2020 RKI published a Supplement to the National Pandemic Plan for COVID-19 (Robert Koch Institut, 2020d), and on 28 March 2020, a law for the protection of the population in an epidemic situation of national scope (Infektionsschutzgesetz) came into force (Bundesgesundheitsministerium, 2020b). In the first early phase of the COVID-19 pandemic in 2020, Germany managed to slow down the speed of the outbreak but was less successful in dealing with the second phase. Coronavirus-related information and measures were communicated through various platforms including TV, radio, press conferences, federal and state government official homepages, social media and applications. In mid-March 2020, the federal and state governments implemented extensive measures nationwide for pandemic containment. Step by step, social distancing and shutdowns were enforced by all Federal States, involving closing schools, day-cares and kindergartens, pubs, restaurants, shops, prayer services, borders, and imposing a curfew. To support those affected financially by the pandemic, the German Government provided large economic packages (Bundesministerium der Finanzen, 2020). These measures have adopted to the COVID-19 situation and changed over the pandemic. On 22 April 2020, the clinical trial of the corona vaccine was approved by Paul Ehrlich Institute, and in late December 2020, the distribution of vaccination in Germany and all other EU countries

Gli stili APA, Harvard, Vancouver, ISO e altri

Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!