Bibliografie tematiche / Titanium sheet / Tesi
Segui questo link per vedere altri tipi di pubblicazioni sul tema: Titanium sheet.

Tesi sul tema "Titanium sheet"

Autore: Grafiati
Pubblicato: 4 giugno 2021
Ultima modifica: 3 febbraio 2022

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Vedi i top-21 saggi (tesi di laurea o di dottorato) per l'attività di ricerca sul tema "Titanium sheet".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Vedi le tesi di molte aree scientifiche e compila una bibliografia corretta.

1

Xu, Lei. "Plasma arc welding fabrication using thin titanium sheet." Thesis, University of Nottingham, 2013. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.605800.

Testo completo
Abstract (sommario):
This work was motivated by the industrial and academic needs for process development of automated keyhole plasma arc welding (K-PA W) in thin Ti- 6AI-4V sheet and the control required for the process to be suitable for aerospace components. K-PAW, is a high energy density precision welding process which is a lowcost alternative to laser and electron beam welding. It is potentially capable of fabricating high integrity titanium alloy welds in aero-engine thin panel structures. However, the process has always represented a challenge owing to the complexity of welding torch configurations and the
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Odenberger, Eva-Lis. "Concepts for hot sheet metal forming of titanium alloys /." Luleå : Department of Applied Physics and Mechanical Engineering, Division of Solid Mechanics, Luleå University of Technology, 2009. http://www.avhandlingar.se/avhandling/167c433b06/.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Odenberger, Eva-Lis. "Material characterisation for analyses of titanium sheet metal forming." Licentiate thesis, Luleå : Luleå tekniska universitet, 2005. http://epubl.ltu.se/1402-1757/2005/63/.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Tsikayi, Davies Shamiso. "Friction hydro pillar riveting process of Ti-6AI-4V titanium sheet." Thesis, Nelson Mandela Metropolitan University, 2015. http://hdl.handle.net/10948/6357.

Testo completo
Abstract (sommario):
Mechanical fasteners are used extensively in the joining of two or more metal plates or sheets. Riveted joints have been the joints of choice mainly for the Aerospace Industry. However for this research, Friction Hydro Pillar Processing has been used to develop and characterise a new riveting technique termed Friction Hydro Pillar Riveting (FHPR). Two overlapping 3.17 mm Ti-6Al-4V sheets were joined together using Ø6 mm rivet which was friction processed. This research has focussed on the initial development of Friction Hydro Pillar Riveting thereby establishing a basic understanding of the in
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Kabert, Bradley Army. "High Strain Rate Consolidation and Forming of Armstrong and HDH Titanium Powder and Sheet Material." The Ohio State University, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=osu1308153810.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Eksteen, Pieter De Waal. "Development of incrementally formed patient-specific titanium knee prosthesis." Thesis, Stellenbosch : Stellenbosch University, 2013. http://hdl.handle.net/10019.1/80397.

Testo completo
Abstract (sommario):
Thesis (MScEng)--Stellenbosch University, 2013.<br>ENGLISH ABSTRACT: Osteoarthritis (OA), also known as degenerative joint disease is a progressive disorder of the joints caused by gradual loss of cartilage and resulting in the development of bony spurs and cysts at the margins of the joints. The degradation of the musculoskeletal system, which is mainly caused by joint injury, obesity (leading to musculoskeletal fatigue) and aging can also lead to osteoarthritis. The hands, feet, spine, and large weight-bearing joints, such as the hips and knees are commonly affected. The only medical solutio
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Daleffe, Anderson. "Fabricação de próteses cranianas personalizadas em chapas de titânio através da estampagem incremental." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2014. http://hdl.handle.net/10183/114468.

Testo completo
Abstract (sommario):
O objetivo deste trabalho é fabricar próteses cranianas personalizados de baixo custo, em chapa de titânio puro. A fabricação antecipada do implante de acordo com as características do paciente permite ao cirurgião estudar e planejar a cirurgia com maiores possibilidades de atingir o resultado esperado, a personalização contribui para o resultado estético e funcional do implante, já que considera a anatomia de cada paciente, o custo baixo permite que um maior número de pessoas possam ser beneficiadas. Os experimentos práticos iniciam-se com aquisição de imagens tomográficas computadorizadas de
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Demiralp, Yurdaer. "Determination of Material Properties and Prediction of Springback in Air Bending of Advance High Strength Steel (AHSS) and Commercially Pure Titanium (CP) Sheet Materials." The Ohio State University, 2012. http://rave.ohiolink.edu/etdc/view?acc_num=osu1339768136.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Castelan, Jovani. "Estampagem incremental do titânio comercialmente puro àplicação em implante craniano." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2010. http://hdl.handle.net/10183/28829.

Testo completo
Abstract (sommario):
Este trabalho apresenta um estudo sobre o uso do processo de estampagem incremental empregando chapas de titânio comercialmente puro. O modelo do componente empregado como foco do trabalho foi um implante craniano a base de titânio. Este tipo de implante é usado, por exemplo, em casos de acidentes em que a camada óssea do crânio foi perdida. Com auxílio de um sistema computacional CAD (Computer Aided Design), foi desenvolvido um modelo 3D, a partir de imagens de tomografia computadorizada. Foram determinadas as características mecânicas e biomédicas das chapas de titânio F67 - grau 2 e, atravé
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Fernandez, Gabriel (Fernandez Ares de Parga). "Digital deposition of yttria patterns on titanium sheets." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/43597.

Testo completo
Abstract (sommario):
Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1997.<br>Includes bibliographical references (leaf 77).<br>The ability to apply Yttria patterns on titanium sheets is required on a secondary manufacturing operation. The freedom to create 2 dimensional patterns as well as 3 dimensional ones by using Three Dimensional Printing allows for the application of Yttria patterns onto these sheets without the use of any type of screens. Two methods for creating these patterns were identified and studied. The first approach consists of selectively printing binder on
Gli stili APA, Harvard, Vancouver, ISO e altri
11

Fitzgibbon, Daniel Nathan, and n/a. "Assessment and comparison of osseointegration in conventionally and immediately restored titanium implants in a sheep model." University of Otago. School of Dentistry, 2008. http://adt.otago.ac.nz./public/adt-NZDU20081201.161832.

Testo completo
Abstract (sommario):
Objectives: The present work was under taken to compare osseointegration of immediately and delayed restored implants in a sheep model, and to compare methods of assessing osseointegration. Methods: Twenty wide-platform implants were placed in the posterior mandibles of 10 sheep, 3 months after premolar extractions. Ten were control implants placed and restored after 3 months of submerged healing. Ten were test implants placed contralaterally and immediately restored. Animals were sacrificed after a further 3 months of healing. At each experimental stage implant stability was measured with r
Gli stili APA, Harvard, Vancouver, ISO e altri
12

Parikh, Anand. "LONG-TERM CRANIAL RECONSTRUCTIONS IN FULL THICKNESS DEFECTS USING CARBONATED CALCIUM PHOSPHATE CEMENT WITH TITANIUM MESH SCAFFOLD IN A SHEEP MODEL: BIOMECHANICAL ANALYSIS." Akron, OH : University of Akron, 2006. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=akron1164993505.

Testo completo
Abstract (sommario):
Thesis (M.S.)--University of Akron, Dept. of Biomedical Engineering, 2006.<br>"December, 2006." Title from electronic thesis title page (viewed 06/27/2007) Co-Advisors, Glen O. Njus, Daniel B. Sheffer; Faculty Reader, Mary C. Verstraete; Department Chair, Daniel B. Sheffer; Dean of the College, George K. Haritos; Dean of the Graduate School, George R. Newkome. Includes bibliographical references.
Gli stili APA, Harvard, Vancouver, ISO e altri
13

Bellet, Michel. "Modelisation numerique du formage superplastique de toles." Paris, ENMP, 1988. http://www.theses.fr/1988ENMP0082.

Testo completo
Abstract (sommario):
Caracterisation generale de la superplasticite et du procede de mise en forme des toles par pression gazeuse. Presentation d'une modelisation numerique permettant une meilleure maitrise de ce procede de fabrication notamment utilise dans l'industrie aeronautique pour le formage de pieces de structures en toles d'alliages de titane ou d'aluminium
Gli stili APA, Harvard, Vancouver, ISO e altri
14

PARVINI-AHMADI, NAGHI. "Phosphatation et tenue a la corrosion d'aciers doux galvanises et electrozingues : passivation par le titane trivalent." Université Louis Pasteur (Strasbourg) (1971-2008), 1989. http://www.theses.fr/1989STR13093.

Testo completo
Abstract (sommario):
Etude de certains aspects et parametres lies au traitement de conversion par phosphatation des toles d'aciers galvanises et electrozingues: temperature, composition, ph des bains. . . Caracterisation de la couche de conversion et examen de l'influence du vieillissement du bain de degraissage et du traitement final de passivation par des solutions de ticl::(3)
Gli stili APA, Harvard, Vancouver, ISO e altri
15

Svoboda, Jan. "Sportovní centrum Polička." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240241.

Testo completo
Abstract (sommario):
This thesis deals with the design and elaboration process of a project documentation of a sports centre. The designed sports centre building is situated in the southern part of the town of Polička, in the area determined for sports and free time activities complexes and areas. It is a two-floor, non-cellar, flat-roof building. It is based on plain concrete strip foundations and reinforced concrete foundation footing. The bearing, peripheral and partition walls are designed from POROTHERM hollow clay blocks. Reinforced concrete columns are designated in open disposition areas. The ceiling const
Gli stili APA, Harvard, Vancouver, ISO e altri
16

Kuo, Yi-Che, and 郭以哲. "A Study on Application of Fracture Criteria to Micro Forming of Titanium Sheet." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/66770107447613354293.

Testo completo
Abstract (sommario):
碩士<br>國立高雄應用科技大學<br>模具工程系碩士班<br>101<br>The shearing and drawing processes of sheet metals are common techniques to produce metal components. The processes involve complex forming behaviors. It is difficult to predict the forming limit of sheet metals. Therefore, it is widely interested in developing methods which are able to accurately predict the facture. This study used a finite element package, DEFORM, to simulate micro shearing and micro drawing processes of pure titanium sheets. By comparing the simulated results with experimental ones, the critical values were estimated for three damage
Gli stili APA, Harvard, Vancouver, ISO e altri
17

Chen, Yun-Tzung, and 陳鋆宗. "An Analysis of Forging Process for Titanium Screw Sheet of Hernia Surgical Instruments." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/w4r3hy.

Testo completo
Abstract (sommario):
碩士<br>國立虎尾科技大學<br>機械與電腦輔助工程系碩士班在職專班<br>102<br>Forging industry for Taiwan''s economic development plays a pivotal role, ranging from marine spindle, small screws and nuts can utilize forging technology to produce. The biggest problem is that the industry experience, and ways to solve the problem with the test, this approach is quite time-consuming and cost, but more often because of the human factor, the experience can not lead to faults caused by inheritance and it makes the experience can not continue. In this paper, through the test with computer-aided simulation for verification to complet
Gli stili APA, Harvard, Vancouver, ISO e altri
18

邱冠華. "A study of Formability for Stamping Commercially Pure titanium sheets." Thesis, 2002. http://ndltd.ncl.edu.tw/handle/48140205530819497369.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
19

Liu, Hsiao-Ping, and 劉曉萍. "Facile Synthesis of Free-standing Titanium Oxynitride Sheets as A Supercapacitor." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/39887567201196253471.

Testo completo
Abstract (sommario):
碩士<br>國立清華大學<br>材料科學工程學系<br>100<br>In this study, titanium oxynitride sheets were obtained by nitration using hydroxo titanate with as prepared by hydrothermal method as the precursor under ammonia atmosphere at different temperature. Titanium oxynitride sheets would be used in supercapacitors due to its high conductivity, chemical stability and multi oxidation states. Among these sheets, N64 show excellent capacitance (5 mVs-1, 572.7 Fg-1). This is a cost-effective and simple preparation for a single-material supercapacitor, thereby eliminating the concern for a junction. The titanium
Gli stili APA, Harvard, Vancouver, ISO e altri
20

Jeng, Shiun Jau, and 鄭勳釗. "Application of Abductive Network and FEM to Predict The Optimal Blank Contour of An Rectangular Cup From Deep Drawing of Titanium Sheets." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/b2z8ba.

Testo completo
Abstract (sommario):
碩士<br>國立虎尾科技大學<br>創意工程與精密科技研究所<br>98<br>In this paper, the finite element method is employed in conjunction with the abductive network to predict the optimum blank contour of a rectangular cup in deep drawing of pure titanium. The height fluctuation behavior of the drawn cup is caused primarily by the unsuitable shape of blank. Different cup heights combined with various aspect ratios of the rectangular cup are taken into account as the process parameters in this study. A finite element-based code is utilized to investigate the material flow characteristics under different process parameters,
Gli stili APA, Harvard, Vancouver, ISO e altri
21

Chen, A. "Study contribution for peri-implant inflammatory response around different biomaterials imunohistochemical study sheep model and human randomized clinical control trial." Doctoral thesis, 2019. http://hdl.handle.net/10451/39543.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Ti possono interessare anche gli elenchi di altri tipi di fonti sul tema "Titanium sheet":
Articoli di riviste
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia