Letteratura scientifica selezionata sul tema "Yield"

Cita una fonte nei formati APA, MLA, Chicago, Harvard e in molti altri stili

Scegli il tipo di fonte:

Consulta la lista di attuali articoli, libri, tesi, atti di convegni e altre fonti scientifiche attinenti al tema "Yield".

Accanto a ogni fonte nell'elenco di riferimenti c'è un pulsante "Aggiungi alla bibliografia". Premilo e genereremo automaticamente la citazione bibliografica dell'opera scelta nello stile citazionale di cui hai bisogno: APA, MLA, Harvard, Chicago, Vancouver ecc.

Puoi anche scaricare il testo completo della pubblicazione scientifica nel formato .pdf e leggere online l'abstract (il sommario) dell'opera se è presente nei metadati.

Articoli di riviste sul tema "Yield"

1

Gupta, M. L., and R. C. Gautam. "Effect of Source and Rate of Phosphorus on Yield and Yield Attributes of Rice." International Rice Research Newsletter 13, no. 3 (June 1, 1988): 27. https://doi.org/10.5281/zenodo.7136056.

Testo completo
Abstract (sommario):
This article 'Effect of Source and Rate of Phosphorus on Yield and Yield Attributes of Rice' appeared in the International Rice Research Newsletter series, created by the International Rice Research Institute (IRRI). The primary objective of this publication was to expedite communication among scientists concerned with the development of improved technology for rice and for rice based cropping systems. This publication will report what scientists are doing to increase the production of rice in as much as this crop feeds the most densely populated and land scarce nations in the world.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Ganesan, K., W. W. Manuel, and T. Sundaram. "Analysis of Yield and Yield Components in Rice." International Rice Research Notes 20, no. 1 (March 1, 1995): 4. https://doi.org/10.5281/zenodo.6999370.

Testo completo
Abstract (sommario):
This article 'Analysis of Yield and Yield Components in Rice' appeared in the International Rice Research Notes series, created by the International Rice Research Institute (IRRI) to expedite communication among scientists concerned with the development of improved technology for rice and rice-based systems. The series is a mechanism to help scientists keep each other informed of current rice research findings. The concise scientific notes are meant to encourage rice scientists to communicate with one another to obtain details on the research reported.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Zhang, X. G., and Y. K. Huang. "Effect of Seedlings Hill on Individual Rice Plant Yield and Yield Components." International Rice Research Newsletter 15, no. 4 (August 1, 1990): 21–22. https://doi.org/10.5281/zenodo.7179491.

Testo completo
Abstract (sommario):
This article 'Effect of Seedlings/Hill on Individual Rice Plant Yield and Yield Components' appeared in the International Rice Research Newsletter series, created by the International Rice Research Institute (IRRI). The primary objective of this publication was to expedite communication among scientists concerned with the development of improved technology for rice and for rice based cropping systems. This publication will report what scientists are doing to increase the production of rice in as much as this crop feeds the most densely populated and land scarce nations in the world.
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Sreekumar, S. G., V. G. Nair, and R. B. Asan. "Effect of Planting Overage Seedlings on Rice Duration, Yield, and Yield Attributes." International Rice Research Newsletter 13, no. 6 (December 1, 1988): 29–30. https://doi.org/10.5281/zenodo.7146274.

Testo completo
Abstract (sommario):
This article 'Effect of Planting Overage Seedlings on Rice Duration, Yield, and Yield Attributes' appeared in the International Rice Research Newsletter series, created by the International Rice Research Institute (IRRI). The primary objective of this publication was to expedite communication among scientists concerned with the development of improved technology for rice and for rice based cropping systems. This publication will report what scientists are doing to increase the production of rice in as much as this crop feeds the most densely populated and land scarce nations in the world.
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Bisht, P. S., R. Puniya, P. C. Pandey, and D. K. Singh. "Grain yield and yield components of rice as influenced by different crop establishment methods." International Rice Research Notes 32, no. 2 (December 1, 2007): 33–34. https://doi.org/10.5281/zenodo.6955835.

Testo completo
Abstract (sommario):
This article 'Grain yield and yield components of rice as influenced by different crop establishment methods' appeared in the International Rice Research Notes series, created by the International Rice Research Institute (IRRI) to expedite communication among scientists concerned with the development of improved technology for rice and rice-based systems. The series is a mechanism to help scientists keep each other informed of current rice research findings. The concise scientific notes are meant to encourage rice scientists to communicate with one another to obtain details on the research reported.
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Afsana, N., and Z. Islam. "Effects of the ladybird beetle Micraspis discolor on yield components and grain yield of rice." International Rice Research Notes 26, no. 2 (December 1, 2001): 43–44. https://doi.org/10.5281/zenodo.6955045.

Testo completo
Abstract (sommario):
This article 'Effects of the ladybird beetle Micraspis discolor on yield components and grain yield of rice' appeared in the International Rice Research Notes series, created by the International Rice Research Institute (IRRI) to expedite communication among scientists concerned with the development of improved technology for rice and rice-based systems. The series is a mechanism to help scientists keep each other informed of current rice research findings. The concise scientific notes are meant to encourage rice scientists to communicate with one another to obtain details on the research reported.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Sitaramaiah, K. V., Ch. V. Rani, and N. S. Reddi. "Standard heterosis of rice hybrids for yield and yield components." International Rice Research Notes 23, no. 2 (May 1, 1998): 15. https://doi.org/10.5281/zenodo.6947851.

Testo completo
Abstract (sommario):
This article 'Standard heterosis of rice hybrids for yield and yield components' appeared in the International Rice Research Notes series, created by the International Rice Research Institute (IRRI) to expedite communication among scientists concerned with the development of improved technology for rice and rice-based systems. The series is a mechanism to help scientists keep each other informed of current rice research findings. The concise scientific notes are meant to encourage rice scientists to communicate with one another to obtain details on the research reported.
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Suprihatno, B., and B. Sutaryo. "Yield and Yield Components of Some New Rice Hybrids Derived From IR58025 a and IR62829 a in Indonesia." International Rice Research Notes 18, no. 1 (March 1, 1993): 19. https://doi.org/10.5281/zenodo.6822461.

Testo completo
Abstract (sommario):
This article 'Yield and Yield Components of Some New Rice Hybrids Derived From IR58025 a and IR62829 a in Indonesia' appeared in the International Rice Research Notes series, created by the International Rice Research Institute (IRRI) to expedite communication among scientists concerned with the development of improved technology for rice and rice-based systems. The series is a mechanism to help scientists keep each other informed of current rice research findings. The concise scientific notes are meant to encourage rice scientists to communicate with one another to obtain details on the research reported.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Alam, S. M. "Effect of Azolla and N on Rice Grain and Straw Yield." International Rice Research Newsletter 14, no. 6 (December 1, 1989): 21. https://doi.org/10.5281/zenodo.7155988.

Testo completo
Abstract (sommario):
This article 'Effect of Azolla and N on Rice Grain and Straw Yield' appeared in the International Rice Research Newsletter series, created by the International Rice Research Institute (IRRI). The primary objective of this publication was to expedite communication among scientists concerned with the development of improved technology for rice and for rice based cropping systems. This publication will report what scientists are doing to increase the production of rice in as much as this crop feeds the most densely populated and land scarce nations in the world.
Gli stili APA, Harvard, Vancouver, ISO e altri
10

MUNDAN, Durhasan, Reşit DEMİR, and Esma PAYDAŞ. "İvesi Koyunlarda Kontrol Günü Verimlerinden Yararlanarak Laktasyon Verimini Tahmin Etme Metotları." Journal of Advances in VetBio Science and Techniques 7, no. 2 (August 31, 2022): 153–60. http://dx.doi.org/10.31797/vetbio.1056967.

Testo completo
Abstract (sommario):
The objective of this study was to determine the effect of various milk control methods on prediction accuracy of lactation milk yield for Awassi sheep. Different control methods (Sweden, Vogel, Holland I, Holland II, Trapeze I, Trapeze II and State Production Farm methods) and control periods (14th, 21st, 28th, 42nd and 56th day) used to determine lactation milk yield were compared. The data of the research was created within the scope of the "National Project of Small Ruminant Animal Breeding in the Hands of the People" in 2018 and a total of 3173 sheep records belonging to 31 enterprises were used. The actual lactation yield in the study was determined as 255.570.85 kg and the lactation length as 170.620.19 day. Correlation coefficients between the actual lactation yield and lactation yield calculated according to different control methods were found to be high and significant for all control periods and control methods (P<0.05, P<0.01, P<0.001). It gave the similar results to the actual lactation yield in the Vogel method calculated according to different control methods in a period of 28th days, in the Trapeze I method in a period of 28th and 42nd days, in the Trapeze II method in all periods (P>0.05). In the other control periods, all methods differed significantly from the actual lactation yield (P<0.05, P<0.01, P<0.001). As a result, it has been concluded that results close to the actual lactation yield will be obtained by using one of the Vogel or Trapeze I-II methods calculated by using the milk yields on the control day of Awassi sheep raised under Şanlıurfa conditions.
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Tesi sul tema "Yield"

1

Zuehlke, Karl William. "Yield." College Park, Md.: University of Maryland, 2009. http://hdl.handle.net/1903/9339.

Testo completo
Abstract (sommario):
Thesis (M.F.A.) -- University of Maryland, College Park, 2009.<br>Thesis research directed by: Dept. of English. Title from t.p. of PDF. Includes bibliographical references. Published by UMI Dissertation Services, Ann Arbor, Mich. Also available in paper.
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Christensen, Justin. "Electron Yield Measurements of High-Yield, Low-Conductivity Dielectric Materials." DigitalCommons@USU, 2017. https://digitalcommons.usu.edu/etd/6694.

Testo completo
Abstract (sommario):
Materials exposed to the space plasma environment acquire electric charge, which can have harmful effects if it leads to arcing or electrostatic breakdown of important spacecraft components. In fact, spacecraft charging is the leading environmentally induced cause of spacecraft anomalies. This study focuses on measuring electron yield, a property of materials that describes how many electrons are ejected from a material under energetic electron bombardment, which can vary depending on the energy of incident electrons. Intrinsic electron yield is defined as the average number of electrons emitted per incident electron from an electrically neutral material. The specific aim of this work is to improve yield measurements for insulator materials, which can be difficult to test using conventional methods due to charge accumulation in insulators.Most studies of electron yield use a steady current electron beam in a vacuum chamber to irradiate materials to be tested. By comparing the amount of current deposited in the material to the total incident current, the emitted current can be calculated. This works well for conductors; however, insulators charge up quickly, which either repel incident electrons or reattract emitted electrons producing erroneous yield measurements. This study improves on methods that use a pulsed electron beam to measure yield with small amounts of charge per pulse, as well as neutralization methods to dissipate stored charge between pulse measurements.The improvements to instrumentation and data analysis techniques are quantified to demonstrate their validity. These improvements will allow for continued studies on extreme insulator materials. Future studies will provide new understanding of interactions between electron radiation and materials, which will allow for better modeling of spacecraft charging and the development of materials that meet desired electron emission specifications.
Gli stili APA, Harvard, Vancouver, ISO e altri
3

German, Guy. "Yield-stress drops." Thesis, University of Edinburgh, 2010. http://hdl.handle.net/1842/3792.

Testo completo
Abstract (sommario):
The behaviour of viscoplastic drops during formation and detachment from a capillary nozzle, free-fall, impact on a solid substrate and subsequent spreading are investigated experimentally by high-speed imaging. Drop dynamic behaviour is an integral component of many contemporary industrial processes ranging from fuelinjection systems in combustion engines to spray coating, agrochemical and pharmaceutical delivery, fire extinguishment and ink-jet printing. Yield-stress fluids are commonly used nowadays in products ranging from mayonnaise to hair-gel. It is hoped that through understanding the dynamics of viscoplastic fluids, additional spray applications can be developed that will help to advance and optimise industrial processes. Viscoplastic fluids exhibit shear-thinning behaviour when the applied stress exceeds a certain threshold value, called the yield-stress. Below this threshold however, the fluid behaves like an elastic solid. By comparing the behaviour of viscoplastic drops with both Newtonian and shear-thinning fluids, yield-stress is shown to be capable of altering detachment behaviour, drop shape during free-fall, impact morphology and the final sessile shape of drops after spreading. For drops attached to the end of a capillary tube, growth continues until a maximum supportable tensile stress is reached in the drop neck. After this critical point, drops become unstable and detach. The critical break-up behaviour of low yield-stress drops is found to be similar to those of Newtonian and shear-thinning fluids. Above a threshold value however, characterised in terms of the ratio between yield-stress magnitude and capillary pressure, yield-stress forces exceed surface tension forces and the maximum tensile stress achievable in the drop neck at critical stability is governed by the extensional yield-stress, established using the von Mises criterion. This threshold value can also be used to characterise equilibrium drop shapes during free-fall. Whereas Newtonian, shear-thinning and low yield-stress fluids form near spherical equilibrium drop shapes, fluids above a threshold value become increasingly more prolate as the yield-stress increases. Upon impact, viscoplastic drops can exhibit central peaks at the end of inertial spreading. The influence of yield-stress magnitude on impact behaviour is qualitatively established by measuring the size of these peaks. Peaks indicate that deformation during impact is localized and within a threshold radius, shear stresses will not be large enough to overcome the yield-stress, therefore fluid within this region will not deform from the drop shape prior to impact. After impact, spreading will be dependent on the surface energy. Again, the ratio of the yield-stress magnitude to the capillary pressure can be used to characterise the final sessile drop shape. Whilst the equilibrium contact angle of Newtonian, shear-thinning and low yield-stress drops is independent of the yield-stress magnitude, above a threshold value, contact angles vary as a function of yield-stress magnitude. Whilst the research presented in this thesis highlights how fluid yield-stress can influence drop dynamics, some results are only qualitative. To establish more quantitative results, computational fluid dynamics methods should be used to examine viscoplastic drop dynamics. This research should focus primarily on impact behaviour, an aspect that has not received much attention previously. Modelling shear-thinning and viscoplastic fluid behaviour can be achieved by incorporating the relevant rheological models into the flow equations and examining impact morphology using a volume of fluid method. Numerical results can then be directly compared with the experimental results. Useful further experimentation could examine the relaxation behaviour of diamagnetically levitated viscoplastic drops. The results from this work could provide further insight into what rheological model best describes viscoplastic behaviour for shear-stresses below the yield-point.
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Antas, Vilém. "Yield Curve Constructions." Master's thesis, Vysoká škola ekonomická v Praze, 2016. http://www.nusl.cz/ntk/nusl-264627.

Testo completo
Abstract (sommario):
The goal of this thesis is to analyze the mathematical apparatus of the most widespread methods used for the yield curves construction. It aims to introduce not only the various of construction models but also to describe the whole process of creation, while discussing the advantages and disadvantage of individual methods. The first chapter focus on the general theory and the use of the term structure of interest rates in practice. The second part deals with the construction process itself and describes the most frequently used methods. The last chapter then shows the real application of selected methods on given data set and the use of the constructed yield curves for interest rate derivative valuation too.
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Cooney, Mackenzie C. "Yield-Curve Momentum." Scholarship @ Claremont, 2019. https://scholarship.claremont.edu/cmc_theses/2244.

Testo completo
Abstract (sommario):
It has been twelve years since the last time the yield curve was inverted. Since 2017, the yield curve has been continuing to flatten and has almost entered an inverted state. The last five recessions have been preceded by the inversion of the yield curve. I examine momentum trading strategy’s ability to outperform during an inverted yield curve state. The yield curve can enter the momentum portfolio strategy through the portfolio’s formation and holding period. I document the increased performance of the momentum strategy’s total portfolio return in an inverted state. These results have implications on the timing a momentum trading strategy might be implemented.
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Li, Dandan. "SOYBEAN QTL FOR YIELD AND YIELD COMPONENTS ASSOCIATED WITH GLYCINE SOJA ALLELES." UKnowledge, 2006. http://uknowledge.uky.edu/gradschool_diss/331.

Testo completo
Abstract (sommario):
USA soybean germplasm has a narrow genetic base that could be augmented by alleles from the wild species Glycine soja which positively influence agronomic traits. The objective of this study was to identify such alleles for yield and yield component QTL (quantitative trait loci). Two populations of 150 BC2F4 lines were generated from a mating between recurrent parent Glycine max 7499 and donor parent Glycine soja PI 245331 with one line in each population tracing back to the same BC2 plant. Population A was used for the QTL identification analysis and population B was used for the QTL verification test. The population A lines were genotyped at 120 SSR marker loci and one phenotype marker, covering a total map length of 1506 cM in 20 linkage groups with an average interval size of 12.5 cM. There were nine putative QTL significantly (Pandlt;0.0001, LODandgt;3.0) associated with yield and yield component traits across 3 environments. One QTL for seed yield was identified using the combined data; the G. soja allele at satt511 on LG-A1 was associated with increased seed yield (LOD=4.3) with an additive yield effect of 190 235 kg ha-1 depending on the QTL analysis method. The phenotypic variance accounted for by the QTL at satt511 was 12%. This QTL also provided a significant yield increase across environments in the validation population; lines that were homozygous for the G. soja allele at satt511 demonstrated a 6.3% (P=0.037) yield increase over lines that were homozygous for the G. max allele. One seed filling period QTL was identified at satt335 (LOD=4.0) on LG-F with an additive effect of +1 day. This QTL also provided a +1 day additive effect (LOD=3.3) on maturity. These results demonstrate the potential of using exotic germplasm to improve soybean yield.
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Gonçalves, Júlia Alves Roque. "Yield gap explaining factors and solutions to improve yields in a maize farm in Portugal." Master's thesis, ISA, 2019. http://hdl.handle.net/10400.5/21289.

Testo completo
Abstract (sommario):
Mestrado em Engenharia Agronómica / Instituto Superior de Agronomia. Universidade de Lisboa<br>Over the decades, it has been found that agricultural intensification, that is, the increase in production per hectare, is substantially urgent and necessary, justified by the observed and expected population increase and the impossibility of agricultural expansion. One of the methods for achieving this goal is the study and investigation of yield gaps, which may be explained by unfavorable soil and climate conditions, or less adequate input management. Given the socio-economic importance of maize crop in Portugal and the need for case studies that exemplify agricultural intensification methods, this dissertation aims to discover which are the reducing factors that justify the gap between the maximum and actual yields, known as yield gaps, which were analyzed between plots and years, and how large was the yield gap over the 10 years. Through a database of irrigation appropriations, nitrogen applications, sowing dates and climate data, collected over 10 years and provided by Milho Amarelo company, located in the Santarem region, other variables were calculated, such as degree-day accumulation, cultural evapotranspiration and intercepted radiation. These data were analyzed annually according to the whole cycle and according to different phenological phases (vegetative and reproductive). Once all variables were obtained and organized, statistical methods of bivariate and multivariate analysis were performed. The magnitude of yield gap was calculated according to the Approach 2 indicated by FAO 41. The results show that interaction of sowing dates with climatic conditions are in the nature of this deviation, with gap’s magnitude ranging from 5% to 20%, depending on the climatic conditions of the year<br>N/A
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Mills, Robert William. "Fission product yield evaluation." Thesis, University of Birmingham, 1995. http://etheses.bham.ac.uk//id/eprint/4353/.

Testo completo
Abstract (sommario):
A new evaluation has been made of the independent and cumulative yields of fission products for a selection of fissioning systems, including fission of nuclides important for reactor design and operation, and for fuel and waste management. The evaluation, which has been given the reference name UKFY3, used a new database of measurements and is considered complete up to early 1993. This database considerably extends and updates the database used for the previous UKFY2 evaluation. The measurement database was analysed to produce a “best estimate” set of fission product yields. Careful study has been made of experimental uncertainties and discrepancies in the data. As some discrepancies could not be resolved the normalised residual technique was used to down-weight discrepant values. Relative and ratio-of-ratio measurements were included in the analysis by an iterative procedure. The measured data, results of the analysis and discrepancies in the data are shown in extensive tables included as appendices to this thesis. The “best estimates” of fission product yields generated by the analysis were then studied to improve the understanding of the systematics of the yield distribution in mass, charge and isomeric state. Models describing these distributions were investigated and fitted. The effects of the fissioning nucleus mass and charge were examined, as well as the effect of neutron energy on the distributions from neutron-induced fission. The results of these studies were then combined with the “best estimates” to generate complete independent and cumulative yields sets for a list of fissioning systems considered important for applications. This set consists of the neutron-induced fission of 232Th, 233,234,235,236,238U, 237,238Np, 238,239,240,241,242Pu, 241,242m,243Am, and 243,244,245Cm, plus the spontaneous fission of 242,244Cm and 252Cf. These complete yield sets were subsequently adjusted to fit the physical constraints of the fissioning process. The new adjusted library produced by the analysis of the UKFY3 database, provisionally called UKFY3.0 has been produced as a computer file in the ENDF-6 format. The new UKFY3.0 file and the UKFY2 file, which has been revised for use in JEF2.2 during this work, were then tested against integral experimental results for delayed neutron and decay heat production respectively. Finally, results of this work are summarized, remaining problems discussed and areas for future work high-lighted.
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Abrahams, Michael (Michael G. ). "Estimating yield curve noise." Thesis, Massachusetts Institute of Technology, 2018. http://hdl.handle.net/1721.1/118001.

Testo completo
Abstract (sommario):
Thesis: S.M. in Management Research, Massachusetts Institute of Technology, Sloan School of Management, 2018.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (pages 27-29).<br>In this paper, I explore methods for estimating noise in the yield curve. I evaluate optimization methods for fitting yield curves using the Nelson-Siegel model where recommendations in the literature remain unclear. I provide open source code on Github including contributions to the QuantLib C++ financial library.<br>by Michael Abrahams.<br>S.M. in Management Research
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Bilhastre, Ângela Germano. "Fitting the yield curve." Master's thesis, NSBE - UNL, 2009. http://hdl.handle.net/10362/9456.

Testo completo
Abstract (sommario):
A Work Project, presented as part of the requirements for the Award of a Masters Degree in Finance from the NOVA – School of Business and Economics<br>This paper is concerned with the fitting of the yield curve in order to achieve a continuous term structure of interest rates by applying two methods: the cubic polynomial spline by McCulloch (1975), and the Nelson-Siegel-Svensson (1994). Subsequently, a trading model is used to make sensitivity analysis decisions on whether to buy or sell a bond (reach/cheap analysis). Finally, with the purpose of forecasting future yields, out-of-sample forecasts are calculated for the parameters of the Nelson-Siegel-Svensson.
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Libri sul tema "Yield"

1

Johnson, Susan Peterson. The yield. Edina, Minn: Beaver's Pond Press, 2009.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

AlRyalat, Saif Aldeen Saleh. Eye Yield. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-2968-6.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Smith, Donald L., and Chantal Hamel, eds. Crop Yield. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-58554-8.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Salençon, Jean. Yield Design. Hoboken, NJ USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118648988.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Mishkin, Frederic S. Yield curve. Cambridge, MA: National Bureau of Economic Research, 1990.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Fage, Paul. Yield calculations. London: Credit Suisse First Boston, 1986.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Johnson, A. I. Specific yield. [Reston, Va.?]: U.S. Dept. of the Interior, U.S. Geological Survey, 1992.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Johnson, Susan Peterson. The yield. Edina, Minn: Beaver's Pond Press, 2009.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Stander, Yolanda S. Yield Curve Modeling. London: Palgrave Macmillan UK, 2005. http://dx.doi.org/10.1057/9780230513747.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Johnson, Arthur G. High-yield immunology. 2nd ed. Baltimore, Md: Lippincott Williams & Wilkins, 2005.

Cerca il testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
Più fonti

Capitoli di libri sul tema "Yield"

1

Kuo, Way, Wei-Ting Kary Chien, and Taeho Kim. "Yield and Modeling Yield." In Reliability, Yield, and Stress Burn-In, 65–91. Boston, MA: Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5671-8_4.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Basuchaudhuri, Pranab. "Yield and Yield-Gap." In Submerged Rice, 200–222. Boca Raton: CRC Press, 2024. http://dx.doi.org/10.1201/9781032663432-7.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Ikeda, Mayuko, Hidemi Kitano, and Makoto Matsuoka. "Yield." In Genetics and Genomics of Rice, 227–35. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-7903-1_15.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Gooch, Jan W. "Yield." In Encyclopedic Dictionary of Polymers, 822. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_12967.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Inman-Bamber, Geoff. "Sugarcane Yields and Yield-Limiting Processes." In Sugarcane: Physiology, Biochemistry, and Functional Biology, 579–600. Chichester, UK: John Wiley & Sons Ltd, 2013. http://dx.doi.org/10.1002/9781118771280.ch21.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Hay, R. K. M. "Physiological Control of Growth and Yield in Wheat: Analysis and Synthesis." In Crop Yield, 1–38. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-58554-8_1.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Thomas, T. H. "Sugar Beet." In Crop Yield, 311–31. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-58554-8_10.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Vos, J. "Potato." In Crop Yield, 333–54. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-58554-8_11.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Hall, A. E. "Cowpea." In Crop Yield, 355–73. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-58554-8_12.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Zhang, F., and D. L. Smith. "Soybean [Glycine max (L.) Merr.] Physiology and Symbiotic Dinitrogen Fixation." In Crop Yield, 375–99. Berlin, Heidelberg: Springer Berlin Heidelberg, 1999. http://dx.doi.org/10.1007/978-3-642-58554-8_13.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Atti di convegni sul tema "Yield"

1

Karthik, Potnuru, Bolloju Sanjith, Betha Charan Satya Raj, Gujjula Dhanush Reddy, and Bhavani Vasantha. "Crop Yield Prediction." In 2024 4th International Conference on Intelligent Technologies (CONIT), 1–5. IEEE, 2024. http://dx.doi.org/10.1109/conit61985.2024.10626796.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Garcia Badaracco, Erica. "High Yield Muon Catalyzed Fusion." In High Yield Muon Catalyzed Fusion. US DOE, 2023. http://dx.doi.org/10.2172/1993076.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

"Yield Floors, Yield Determination and Yield Harmonisation." In 14th Annual European Real Estate Society Conference: ERES Conference 2007. ERES, 2007. http://dx.doi.org/10.15396/eres2007_366.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Steininger, Bertram, and Jan Becker. "Future yield after taxes (FYT): A more realistic yield rate than IRR or other types of yields?" In 24th Annual European Real Estate Society Conference. European Real Estate Society, 2017. http://dx.doi.org/10.15396/eres2017_255.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

"Yield enhancement." In 2004 Semiconductor Manufacturing Technology Workshop Proceedings. IEEE, 2004. http://dx.doi.org/10.1109/smtw.2004.1393719.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Wilcox, Daniel, and Slava Libman. "Yield Enhancement." In 2021 IEEE International Roadmap for Devices and Systems Outbriefs. IEEE, 2021. http://dx.doi.org/10.1109/irds54852.2021.00018.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Dannemann Dugick, Fransiska, and Sarah Albert. "Seismoacoustic Yield." In Multi-Phenomenology Workshop - AWE, , United Kingdom - February - 2023. US DOE, 2023. http://dx.doi.org/10.2172/2432105.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Bickford, Jeanne P. "Terminal metal inspection yield improvement YE: Yield enhancement." In 2017 28th Annual SEMI Advanced Semiconductor Manufacturing Conference (ASMC). IEEE, 2017. http://dx.doi.org/10.1109/asmc.2017.7969234.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Xu, Yang, Bo Wang, and Jurgen Teich. "Parametric yield optimization using leakage-yield-driven floorplanning." In 2014 24th International Workshop on Power and Timing Modeling, Optimization and Simulation (PATMOS). IEEE, 2014. http://dx.doi.org/10.1109/patmos.2014.6951860.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

A. Fekete. "VARIATION IN THE YIELD MEASURED BY YIELD MONITOR." In 2001 Sacramento, CA July 29-August 1,2001. St. Joseph, MI: American Society of Agricultural and Biological Engineers, 2001. http://dx.doi.org/10.13031/2013.7296.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri

Rapporti di organizzazioni sul tema "Yield"

1

Richard A. Hardin, Christoph Beckermann, and Tim Hays. Yield Improvement in Steel Casting (Yield II). Office of Scientific and Technical Information (OSTI), February 2002. http://dx.doi.org/10.2172/793381.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
2

Mishkin, Frederic. Yield Curve. Cambridge, MA: National Bureau of Economic Research, December 1990. http://dx.doi.org/10.3386/w3550.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
3

Research Institute (IFPRI), International Food Policy. Maize yield potential. Washington, DC: International Food Policy Research Institute, 2014. http://dx.doi.org/10.2499/9780896298460_25.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
4

Dugan, G. Antiproton Yield Calculations. Office of Scientific and Technical Information (OSTI), January 1986. http://dx.doi.org/10.2172/948896.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
5

Piazzesi, Monika, and Martin Schneider. Equilibrium Yield Curves. Cambridge, MA: National Bureau of Economic Research, October 2006. http://dx.doi.org/10.3386/w12609.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
6

Beckman, Jayson, Fengxia Dong, Maros Ivanic, Jonas Jägermeyr, and Nelson Villoria. Climate-induced yield changes and TFP. [Washington, D.C.]: Economic Research Service, U.S. Department of Agriculture, 2024. http://dx.doi.org/10.32747/2024.8534117.ers.

Testo completo
Abstract (sommario):
Increasing agricultural productivity is vital to ensure that global food demand can be met. However, the impact of a changing climate on temperatures and precipitation could potentially influence agricultural productivity by affecting crop yields. This report combines the latest estimates of yield changes from the Agricultural Model Intercomparison and Improvement Project with projections of future productivity changes in the form of total factor productivity (TFP) to gain a better understanding of the future of agricultural production (and thus of food supply). Yield estimates are used from a high greenhouse gas emissions scenario (to show an upper bound, as the impact of climate on yields is the strongest) for corn, rice, soybeans, and wheat. Yield changes are then combined with TFP estimates across four scenarios where research and development (R&amp;D) assumptions determine the rate of TFP growth. Finally, the changes in yields and TFP, in conjunction with changes in populations and incomes, are assessed to shape the projected state of food supply in 2050. The results suggest that with no additional R&amp;D expenditures, climate change would result in a production-consumption gap. When R&amp;D investments are increased by amounts corresponding to the remaining three scenarios, TFP growth is sufficient to mitigate the impacts of climate change and projected population/income growth to maintain production at a level to meet global demand for food
Gli stili APA, Harvard, Vancouver, ISO e altri
7

Liu, Yan, and Jing Cynthia Wu. Reconstructing the Yield Curve. Cambridge, MA: National Bureau of Economic Research, May 2020. http://dx.doi.org/10.3386/w27266.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
8

Williams, Brian, Richard Picard, and Dale Anderson. Multi-phenomenology Yield Characterization. Office of Scientific and Technical Information (OSTI), March 2024. http://dx.doi.org/10.2172/2329234.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
9

Wright, Lynn L. US Woody Crop Yield Potential Database Documentation with Referenced Yield Summary Tables. Office of Scientific and Technical Information (OSTI), January 2014. http://dx.doi.org/10.2172/1111447.

Testo completo
Gli stili APA, Harvard, Vancouver, ISO e altri
10

Mosha, Devotha B., Gilead Mlay, Colin Poulton, and Amrita Saha. Yield and Commercialisation Effects of SRI Interventions in Mngeta, Kilombero District, Tanzania. Institute of Development Studies (IDS), September 2021. http://dx.doi.org/10.19088/apra.2021.025.

Testo completo
Abstract (sommario):
This paper discusses System of Rice Intensification (SRI) interventions and its potential effects on paddy yield and commercialisation in Mngeta division, Kilombero district in Morogoro region, Tanzania. SRI is an innovative agroecological methodology that aims to improve yields and farmers’ profits by creating the most suitable environment for the rice plant to grow. It comprises the precise set of cultivation practices specifically required for careful management of biophysical needs of the rice plant for producing high yields. To assess the effects, we compare between trained and non-trained farmers, as well as between farmers who are members of SRI associations and non-SRI members, on aspects of adoption of SRI interventions, paddy productivity and yields. In turn, the effects of SRI is evaluated in terms of its influence on rice yield per hectare and commercialisation at household level.
Gli stili APA, Harvard, Vancouver, ISO e altri
Offriamo sconti su tutti i piani premium per gli autori le cui opere sono incluse in raccolte letterarie tematiche. Contattaci per ottenere un codice promozionale unico!

Vai alla bibliografia