Увійти

Готові списки джерел за темами / Manufacturabilité

Добірка наукової літератури з теми "Manufacturabilité"

Автор: Grafiati

Опубліковано: 18 травня 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Manufacturabilité".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Статті в журналах з теми "Manufacturabilité":

1

Kino-oka, Masahiro, Manabu Mizutani, and Nicholas Medcalf. "Cell manufacturability." Cell and Gene Therapy Insights 5, no. 10 (October 21, 2019): 1347–59. http://dx.doi.org/10.18609/cgti.2019.140.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Malec, Henry A. "Measuring manufacturability." Quality and Reliability Engineering International 9, no. 5 (September 1993): 399. http://dx.doi.org/10.1002/qre.4680090502.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

LI, JIN, and HONG YI. "RESEARCH ON SHIP MANUFACTURABILITY AND EVALUATION METHOD." Journal of Advanced Manufacturing Systems 10, no. 01 (June 2011): 3–10. http://dx.doi.org/10.1142/s0219686711001916.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Ship manufacturability is one of the most important works for modern shipbuilding industry. The basic concept of ship manufacturability and its evaluation system are discussed first. Then the characteristics of ship manufacturability are analyzed. One kind of ship manufacturability evaluation (SME) strategy is put forward. Two evaluation methods of ship manufacturability (knowledge-based manufacturability evaluation and simulation-based manufacturability evaluation) are proposed too. With the proposed methods, the ship manufacturability can be evaluated reasonably.

4

KELLY, M. J. "Nanotechnology and manufacturability." Nanotechnology Perceptions 7, no. 2 (July 30, 2011): 79–81. http://dx.doi.org/10.4024/n03ke11a.ntp.07.02.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

KELLY, M. J. "Nanotechnology and manufacturability." Nanotechnology Perceptions 7, no. 2 (November 30, 2011): 95–103. http://dx.doi.org/10.4024/n05bo10a.ntp.07.02.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Bazrov, B. M., and A. A. Troitskii. "Manufacturability of Products." Russian Engineering Research 40, no. 8 (August 2020): 683–87. http://dx.doi.org/10.3103/s1068798x20080055.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

KIMURA, Fumihiko. ""Manufacturability" and "Recyclability"." Journal of the Society of Mechanical Engineers 101, no. 954 (1998): 349–50. http://dx.doi.org/10.1299/jsmemag.101.954_349.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Margail, J. "SIMOX material manufacturability." Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms 74, no. 1-2 (April 1993): 41–46. http://dx.doi.org/10.1016/0168-583x(93)95011-s.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Troitsky, Alexandr. "Design formulae of product design production manufacturability." Science intensive technologies in mechanical engineering 2020, no. 7 (July 16, 2020): 31–34. http://dx.doi.org/10.30987/2223-4608-2020-7-31-34.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

There are shown basic drawbacks of the well-known factors of manufacturability. The formulae of manufacturability factors excluding mentioned drawbacks and taking into account the impact of product design characteristics upon complete laboriousness of its manufacturing are offered. The developed formulae of these manufacturability factors give possibility for obtaining an integral estimate of manufacturability by means of their summation.

10

Yeung, Y. C., and Kai Ming Yu. "Manufacturability of Fractal Geometry." Materials Science Forum 471-472 (December 2004): 722–26. http://dx.doi.org/10.4028/www.scientific.net/msf.471-472.722.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Nowadays more and more aesthetic product developments, assemblage and decoration designs are taking aesthetically appealing forms of natural objects such as rough terrain, ripples on lakes, coastline and seafloor topography. They are mathematical definable via fractal geometry theory and emerge to attract a lot of attention. However, not many methods for manufacturing of fractal objects have been reported in the literature and no previous research papers concern the manufacturability of fractal geometry. The paper will, thus, give a tentative classification and nomenclature of fractal geometry. Then, a state-of-the-art overview of manufacturing techniques is presented. By bridging the gap between fractal geometry and manufacturing, those processes that are promising to manufacture the three dimensional (3D) fractal objects will be highlighted. Afterward, a brief overview of limitation of those processes will be discussed.

Більше джерел

Дисертації з теми "Manufacturabilité":

1

Wang, Zhiping. "Constructive generative design methods for qualified additive manufacturing." Thesis, Ecole centrale de Nantes, 2021. https://tel.archives-ouvertes.fr/tel-03670417.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Les technologies de fabrication additive (FA) donnent de plus en plus de liberté de conception aux concepteurs et aux ingénieurs pour concevoir et définir des géométries et des compositions de matériaux très complexes. En raison d'un traitement couche par couche, les contraintes, méthodes, outils et processus de conception en FA sont différents de ceux des processus de fabrication traditionnels. Les méthodes et outils de conception traditionnels ne peuvent pas répondre aux besoins de la conception en FA. Par conséquent, un nouveau domaine de recherche, la conception pour la FA (Design for AM - DfAM), a émergé pour répondre à ce besoin. Cependant, les méthodes de DfAM existantes sont soit des lignes directrices, soit des outils de calculs, qui ont une prise en compte limitée des contraintes couplées le long de la chaîne de traitement numérique de la FA et peinent à garantir la fabricabilité de la conception en FA. Pour contribuer à l’obtention d’une conception qualifiée en FA, ce travail de thèse se concentre sur trois problèmes existants typiques dans le domaine du DfAM : premièrement, com-ment assurer la fabricabilité dans le processus d’optimisation topologique ? Deuxièmement, comment concevoir des structures de supports allégées, faciles à retirer pour le post-traitement et de diffusion de chaleur conviviales pour assurer la précision de la forme et améliorer la rugosité de surface des pièces imprimées ? Enfin, comment éviter les pertes de précision lors de la préparation de l'impression de structures en treillis complexes et assurer leur fabricabilité lors de la conception ?Pour résoudre les trois problèmes identifiés, ce travail de thèse propose un ensemble de nouvelles méthodes de conception générative constructive : 1. Méthode de conception générative basée sur un modèle CSG pour assurer la fabricabilité dans l'optimisation de la topologie de la structure allégée ; 2. Méthode de conception générative constructive basée sur des modèles pour optimiser la conception de la structure de supports et 3. Conception constructive inversée basée sur les « parcours d'outils » pour obtenir directement des modèles de traitement de structures poreuses ou de réseaux complexes correspondants avec des « parcours d'outils » pour obtenir directement des modèles de traitement de structures poreuses ou de réseaux complexes correspondants avec des « parcours d'outils » d'impression qualifiés. Les trois méthodes proposées intègrent les contraintes de processus de FA, réalisent un contrôle paramétrique et économisent des coûts de calcul dans le processus de conception pour obtenir un ensemble de solutions de conception candidates avec une fabrication garantie. Un ensemble d'études comparatives avec les méthodes DfAM existantes et quelques études de cas expérimentaux dans des applications médicales ont démontré les avantages des méthodes proposées. Ces méthodes constructives peuvent avoir un grand potentiel d'application pour être adoptées comme outils de conception et de prise de décision pour d'autres applications industrielles lorsqu'un DfAM qualifié est requis
Additive manufacturing (AM) technologies give more and more design freedom to designers and engi-neers to design and define highly complex geometries and material compositions. Due to a layer-by-layer processing, the constraints, methods, tools and processes of design in AM are different from that in traditional manufacturing processes. Traditional design methods and tools cannot meet the needs of design in AM. Therefore, a new re-search field, design for AM (DfAM), has emerged to serve this need. However, existing DfAM methods are either guidelines or pure computation-based, which have limited consideration of coupled constraints along the AM digital processing chain and are difficult to ensure manufactura-bility of design in AM. To obtain qualified design in AM, this research focuses on three typical existing problems in DfAM domain: Firstly, how to ensure manufacturability in (topology optimization) TO process? Secondly, how to design support structures with lightweight, easy-to-remove for post-processing and friendly heat-diffusion properties to ensure shape accuracy and improve surface roughness of printed parts? Finally, how to avoid accuracy loss in print-ing preparation of complex lattice structures and ensure their manufacturability in design?To solve the three identified problems, this research developed a set of new constructive genera-tive design methods: 1. CSG-based generative design method to ensure manufacturability in light-weight topology optimization; 2. Pattern-based constructive generative design method to optimize support structure design and 3. Toolpath-based inversed constructive design to directly ob-tain processing models of corresponding complex lattice or porous structures with qualified print-ing toolpaths. The three proposed methods can well embed AM process constraints, realize para-metric control and save computation cost in design process to obtain a set of candidate design solutions with ensured manufacturability. A set of comparison studies with existing DfAM meth-ods and a couple of experiment case studies in medical applications demonstrated the methods’ advantages. These constructive methods may have large application potential to be adopted as design and decision making tools for other industrial applications when qualified DfAM is required

2

Nowack, Mark Lorenz. "Design guideline support for manufacturability." Thesis, University of Cambridge, 1997. https://www.repository.cam.ac.uk/handle/1810/251628.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Matching the configuration of a product to available production capabilities during the design process directly affects product cost and hence product competitiveness. Existing approaches to improving manufacturability are helpful in the latter stages of the design process and usually involve corrective redesign. To avoid redesign, designers require appropriate guidance in the early stages of the design process. Guidelines, that is prescriptive recommendations for actions to address issues, are frequently used to provide this guidance. However, guideline sets are often poorly structured, incomplete, and the guidelines difficult to retrieve and apply. The overall aim of this research is to improve guidance to designers, particularly manufacturability guidance, early in the design process. Particular objectives of this research are to improve existing methods of guideline collection, storage, and retrieval. The research proceeded in the following pattern: - Case studies explored manufacturability problems in a small company. - Guideline support concepts were developed using a retrospective case study. - Collection concepts were developed with observational studies. - Storage approaches were developed using advanced composite guidelines. - A link-based retrieval technique was validated with a mechanical design protocol study. - Collection, storage, and retrieval methods were empirically tested. The results of this research were: - a technique to directly relate guidelines to the design process - a system of links relating guidelines to each other - an Action-Centred Guideline Approach - a preliminary software implementation of the approach - validation of the utility of the approach. The conclusions from this research are: - Guidance in the early stages of the design process can be improved through the use of structured guidelines. - The Action-Centred Guideline Approach improves the collection, storage, and retrieval of guidelines. - Empirical validation showed that guideline links are an effective means for improving guideline retrieval. - Further research is required in the areas of integrating the approach with other design tools, and in extending the link technique.

3

Pons, Solé Marc. "Layout regularity for design and manufacturability." Doctoral thesis, Universitat Politècnica de Catalunya, 2012. http://hdl.handle.net/10803/96983.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

In nowadays nanometer technology nodes, the semiconductor industry has to deal with the new challenges associated to technology scaling. On one hand, process developers face increasing manufacturing cost and variability, but also decreasing manufacturing yield. On the other hand, circuit designers and electronic design automation (EDA) developers have to reduce design turnaround time and provide the tools to cope with increasing design complexity and reduce the time-to-market. In this scenario, closer collaboration between all the actors involved is required. New approaches considering both design and manufacturing need to be explored. These are the so called design for manufacturability (DFM) techniques. A DFM trend that is becoming dominant is to make circuit layouts more regular and repetitive. The regular layout fabrics are based on the configuration of a simplied mask set, therefore reducing the manufacturing cost. Moreover, a reduced number of layout patterns is used, allowing better process variability control and optimization. Hence, regularity reduces layout complexity and therefore design complexity, allowing faster time-to-market. In this thesis, we explore forcing maximum layout regularity focusing on future technology nodes, with increasing design and manufacturability issues, where we expect layout regularity to be mandatory. With this objective, we have developed a new regular layout fabric called Via-Configurable Transistor Array (VCTA). The physical design is fully explained involving layout and geometrical considerations for transistors and interconnects. Initially, VCTA layouts developed manually have been evaluated in terms of manufacturability, but also in terms of area, energy and delay. For digital design, 32-bit binary adders designed with VCTA have been compared to standard cell layouts. For analog design, a delay-locked loop design using VCTA has been compared to its full custom version. We have also developed a physical synthesis tool that allows us to obtain VCTA circuit layouts in an automated way. Developing our own automation tool lets us controlling all the decisions made during the physical design flow to ensure that maximum layout regularity is respected. In this case the work is based on several algorithms, for instance for routing, that we have oriented to the area optimization of the layouts. Finally, in order to demonstrate the benefits of layout regularity, we have proposed a new layout regularity metric called Fixed Origin Corner Square Inspection (FOCSI). It is based on the geometrical inspection of the patterns in the layouts and it allows designers to compare regularity of designs but also how their regularity will impact their manufacturability. The FOCSI layout analysis tool can be used to optimize manufacturability.

4

Shiau, Yea-Jou. "Web-enabled environment for manufacturability assessment." Thesis, Nottingham Trent University, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.367157.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Ren, Feng. "STL toolkit-a manufacturability evaluation environment /." The Ohio State University, 1998. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487953567771012.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Li, Ye. "Manufacturability analysis for non-feature-based objects." [Ames, Iowa : Iowa State University], 2008.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Lee, Mern Keat. "Design for manufacturability of speed-reduction cam mechanisms." Thesis, McGill University, 2001. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=31056.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Cam mechanisms are widely used in industry, in applications requiring quick-return and indexing motions. A current research effort at the Robotic Mechanical Systems Laboratory of McGill University's Centre for Intelligent Machines aims at the application of cam mechanisms as speed reducers. The accuracy required in these mechanisms is of the utmost importance, especially when cams are rotating at a high speed.
In this thesis, the design for manufacturability of planar speed-reduction cam mechanisms is studied. In particular, the thesis focuses on a speed reducer with a rotating follower to couple shafts of parallel axes, termed planar Speed-o-Cam. Principles of the design for manufacturability are applied to Speed-o-Cam and a unified method for obtaining the optimum parameters satisfying the curvature constraints and pressure-angle bounds is developed. These two factors are relatively important because Numerically Controlled and Computer Numerically Controlled machine tools could be very sensitive to changes of curvature of the workpiece, especially when milling complex shapes such as those of cam plates.
Cam-mechanism balancing is also studied because unbalance in a high-speed rotating element can cause severe vibrations and greatly affect the bearings and hence, the performance of the machine. This is done by not only adding counterweights, which unavoidably increase the weight and volume of the mechanism, but also by removing material.

8

Medani, Omar. "Distributed manufacturability assessment using STEP AP224 and XML." Thesis, University of Nottingham, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.418968.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Xu, Xu. "Optimizations of manufacturability and manufacturing in nanometer-era VLSI." Connect to a 24 p. preview or request complete full text in PDF format. Access restricted to UC campuses, 2006. http://wwwlib.umi.com/cr/ucsd/fullcit?p3219776.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Thesis (Ph. D.)--University of California, San Diego, 2006.
Title from first page of PDF file (viewed July 24, 2006). Available via ProQuest Digital Dissertations. Vita. Includes bibliographical references (p. 125-129).

10

Dechu, Sandeep. "Design for manufacturability and reliability of threshold logic gates /." Available to subscribers only, 2006. http://proquest.umi.com/pqdweb?did=1240704171&sid=23&Fmt=2&clientId=1509&RQT=309&VName=PQD.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Manufacturabilité":

1

Balasinski, Artur. Design for Manufacturability. New York, NY: Springer New York, 2014. http://dx.doi.org/10.1007/978-1-4614-1761-3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Anderson, David M. Design for Manufacturability. Second edition. | Boca Raton : Taylor & Francis, 2020.: Productivity Press, 2020. http://dx.doi.org/10.4324/9780429285981.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Clark, Raymond H. Printed circuit engineering: Optimizing for manufacturability. New York: Van Nostrand Reinhold, 1989.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Balasinki, Artur. Semiconductors: Integrated circuit design for manufacturability. Boca Raton, FL: CRC Press, 2012.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Yu, Bei, and David Z. Pan. Design for Manufacturability with Advanced Lithography. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-20385-0.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Kaul, Anupama B. Microelectronics to nanoelectronics: Materials, devices & manufacturability. Boca Raton, FL: Taylor & Francis, 2012.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Lampaert, Koen. Analog Layout Generation for Performance and Manufacturability. Boston, MA: Springer US, 1999.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Lampaert, Koen. Analog layout generation for performance and manufacturability. Boston: Kluwer Academic, 1999.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Lampaert, Koen, Georges Gielen, and Willy Sansen. Analog Layout Generation for Performance and Manufacturability. Boston, MA: Springer US, 1999. http://dx.doi.org/10.1007/978-1-4757-4501-6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Kundu, Sandip. Nanoscale CMOS VLSI circuits: Design for manufacturability. New York: McGraw-Hill, 2010.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Manufacturabilité":

1

Sivaram, Srinivasan. "Manufacturability." In Chemical Vapor Deposition, 41–61. Boston, MA: Springer US, 1995. http://dx.doi.org/10.1007/978-1-4757-4751-5_3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Shim, Seongbo, and Youngsoo Shin. "DSAL Manufacturability." In Physical Design and Mask Synthesis for Directed Self-Assembly Lithography, 15–24. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76294-4_2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Ranđelović, Saša. "Manufacturability of Biomaterials." In Biomaterials in Clinical Practice, 633–58. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-68025-5_24.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Marcoux, Phil P. "Design for Manufacturability." In Fine Pitch Surface Mount Technology, 265–83. Boston, MA: Springer US, 1992. http://dx.doi.org/10.1007/978-1-4615-3532-4_12.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Anderson, David M. "Design for Manufacturability." In Design for Manufacturability, 3–36. Second edition. | Boca Raton : Taylor & Francis, 2020.: Productivity Press, 2020. http://dx.doi.org/10.4324/9780429285981-2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Balasinski, Artur. "Classic DfM: From 2D to 3D." In Design for Manufacturability, 11–102. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-1761-3_2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Balasinski, Artur. "DfM at 28 nm and Beyond." In Design for Manufacturability, 103–203. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-1761-3_3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Balasinski, Artur. "New DfM Domain: Stress Effects." In Design for Manufacturability, 205–71. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-1761-3_4.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Balasinski, Artur. "Closure and Future Work." In Design for Manufacturability, 273. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-1761-3_5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Anderson, David M. "Total Cost." In Design for Manufacturability, 321–41. Second edition. | Boca Raton : Taylor & Francis, 2020.: Productivity Press, 2020. http://dx.doi.org/10.4324/9780429285981-10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Manufacturabilité":

1

Xue, Hua, Ed P. Huijbregts, and Jochen A. G. Jess. "Routing for manufacturability." In the 31st annual conference. New York, New York, USA: ACM Press, 1994. http://dx.doi.org/10.1145/196244.196435.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Billings, Daniel A. "Basic manufacturability interval." In Orlando '91, Orlando, FL, edited by Mohan M. Trivedi. SPIE, 1991. http://dx.doi.org/10.1117/12.45486.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Azam, Mohammed A., and William P. Holmes. "Design for Manufacturability." In ASME 1995 Design Engineering Technical Conferences collocated with the ASME 1995 15th International Computers in Engineering Conference and the ASME 1995 9th Annual Engineering Database Symposium. American Society of Mechanical Engineers, 1995. http://dx.doi.org/10.1115/detc1995-0035.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Анотація:

Abstract Research has been carried out at Coventry University Centre for Integrated Design on the concept design process and it is funded by the Coventry University Research Fund. An experiment, simulating product design in industry, was conducted by concept designers which were, in turn, acted by student industrial designers and student engineering designers. In general the product design process is a sequential process. The first part of the process is the conceptual phase. This is followed by the engineering design phases which include all the manufacturing information. In this case the downstream engineering design focuses on designs for manufacture and process selection. Information on the requirements of conceptual designers in these areas was collected from these experiments. The information is ultimately to be incorporated into rules in a knowledge base which can be readily accessed by the industrial designer during concept development via a CAD system.

4

Lavin, Mark, and Lars Liebmann. "CAD computation for manufacturability." In the 2002 IEEE/ACM international conference. New York, New York, USA: ACM Press, 2002. http://dx.doi.org/10.1145/774572.774635.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Zorian, Y., and J. A. Carballo. "T1: Design for Manufacturability." In 14th Asian Test Symposium (ATS'05). IEEE, 2005. http://dx.doi.org/10.1109/ats.2005.103.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

"Session Tue - PM2 manufacturability." In 2016 International Symposium on 3D Power Electronics Integration and Manufacturing (3D-PEIM). IEEE, 2016. http://dx.doi.org/10.1109/3dpeim.2016.7570557.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Kreischer, Cody B. "Aspheric design for manufacturability." In Optifab 2007. SPIE, 2007. http://dx.doi.org/10.1117/12.718752.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Akin, Omer. "Building Manufacturability and Robotics." In 5th International Symposium on Automation and Robotics in Construction. International Association for Automation and Robotics in Construction (IAARC), 1988. http://dx.doi.org/10.22260/isarc1988/0027.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Ma, Mark, Hyesook Hong, Yong Seok Choi, Chi-Chien Ho, Mark Mason, and Randy McKee. "Design, mask, and manufacturability." In Photomask Technology, edited by Wolfgang Staud and J. Tracy Weed. SPIE, 2004. http://dx.doi.org/10.1117/12.569309.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Farrell, Richard A., Erik R. Hosler, Gerard M. Schmid, Ji Xu, Moshe E. Preil, Vinayak Rastogi, Nihar Mohanty, et al. "Manufacturability considerations for DSA." In SPIE Advanced Lithography, edited by Thomas I. Wallow and Christoph K. Hohle. SPIE, 2014. http://dx.doi.org/10.1117/12.2048396.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Manufacturabilité":

1

Johnson, F. C. Frit 625 Manufacturability Study. Office of Scientific and Technical Information (OSTI), April 2019. http://dx.doi.org/10.2172/1510928.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Bruins, Henderikus B. High Speed Manufacturability Polymeric Tray. Fort Belvoir, VA: Defense Technical Information Center, November 2001. http://dx.doi.org/10.21236/ada423492.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Wang, Yu-Shan. Analog Statistical Design for Manufacturability. Portland State University Library, January 2000. http://dx.doi.org/10.15760/etd.7477.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Montoya, Tracy Louise, Paul Gregory Meacham, David Perry, Robin S. Broyles, Steven Hickey, and Jacquelynne Hernandez. Flow Battery System Design for Manufacturability. Office of Scientific and Technical Information (OSTI), October 2014. http://dx.doi.org/10.2172/1160291.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Robbins, Joshua. Topology Optimization with a Manufacturability Objective. Office of Scientific and Technical Information (OSTI), October 2021. http://dx.doi.org/10.2172/1825357.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Jensen, W. A., and G. P. Spellman. Design for manufacturability evaluation: Composite NIF Pockel Cell body. Office of Scientific and Technical Information (OSTI), April 1994. http://dx.doi.org/10.2172/10145559.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Allen, C., R. Blazek, J. Desch, J. Elarton, D. Kautz, D. Markley, H. Morgenstern, R. Stewart, and L. Warner. Design specifications for manufacturability of MCM-C multichip modules. Office of Scientific and Technical Information (OSTI), June 1995. http://dx.doi.org/10.2172/83879.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Barbee, T., and D. McClure. Multilayer Foil Manufacturability Final Report CRADA No. TSV-1246-96. Office of Scientific and Technical Information (OSTI), February 2018. http://dx.doi.org/10.2172/1426080.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Tennery, V. J., and T. O. Morris. The Ceramic Manufacturability Center: A new partnership with US industry. Office of Scientific and Technical Information (OSTI), December 1993. http://dx.doi.org/10.2172/10170657.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Reeves, Tommy, Derek Golinghorst, Tyler Benzing, Morgan Findley, Joseph R. Vanstrom, and Jacek A. Koziel. Design and Manufacturability of an In-Field Cow/Calf Hutch. Ames: Iowa State University, Digital Repository, April 2018. http://dx.doi.org/10.31274/tsm416-180814-31.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.