Готові списки джерел за темами / Method for evaluating production processes

Зміст

Статті в журналах
Дисертації
Книги
Частини книг
Тези доповідей конференцій
Звіти організацій

Добірка наукової літератури з теми "Method for evaluating production processes"

Автор: Grafiati

Опубліковано: 28 травня 2022

Оновлено: 31 липня 2025

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Method for evaluating production processes".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Method for evaluating production processes"

Petrov, Igor, Veniamin Kharitonov, and Marina Polyakova. "Procedure for Evaluating Competitiveness of Production Processes." Materials Science Forum 946 (February 2019): 726–31. http://dx.doi.org/10.4028/www.scientific.net/msf.946.726.

Повний текст джерела

Анотація:

At present time a lot of methods are used for the assessment of product quality level, as well as its manufacturing perspectives. Only quantitative data can be used in order to compare the competitiveness of products, facilities, companies, etc. But methods for quantitative assessment of technological processes competitiveness have not been still proposed. The present paper describes a developed procedure for evaluation the competitiveness of technological processes. It takes into consideration the main factors which are used for estimation of process effectiveness: quality of products, level

Стилі APA, Harvard, Vancouver, ISO та ін.

Filippova, A. N., N. V. Kryuchkova, and N. A. Karpechenko. "The Method of Express Evaluating of Rubbers Quality for Contemporary Production Processes." Kauchuk i Rezina 79, no. 2 (2020): 78–81. http://dx.doi.org/10.47664/0022-9466-2020-79-2-78-81.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Polák, Pavel, Miroslav Prístavka, and Katarína Kollárová. "Evaluating The Effectiveness Of Production Process Using Pareto Analysis." Acta Technologica Agriculturae 18, no. 1 (2015): 18–21. http://dx.doi.org/10.1515/ata-2015-0005.

Повний текст джерела

Анотація:

Abstract The aim of this paper is to present the possibilities of using the Pareto method in evaluating the effectiveness of machine production processes. The paper deals with the production process of material cutting using progressive technology and subsequent evaluation of its effectiveness and quality. In the production process, we have used the method of material cutting by abrasive water jet. The Pareto analysis was used for eliminating the shortcomings in the quality of the final part.

Стилі APA, Harvard, Vancouver, ISO та ін.

Czaplicka-Kolarz, Krystyna, Dorota Burchart-Korol, Marian Turek, and Wojciech Borkowski. "Model Of Eco-Efficiency Assessment Of Mining Production Processes." Archives of Mining Sciences 60, no. 2 (2015): 477–86. http://dx.doi.org/10.1515/amsc-2015-0031.

Повний текст джерела

Анотація:

Abstract The paper presents an author’s method of eco-efficiency assessment of mining production processes in hard coal mines, which enables integrating results of evaluating both environmental and economic aspects. The proposed method uses life cycle approach to assess environmental efficiency and the result of operating activities to assess economic efficiency. The comprehensive method of assessing mining production processes was proposed as the Key Performance Indicator (KPI) in hard coal mines in Poland to be used to support decision making in mining companies.

Стилі APA, Harvard, Vancouver, ISO та ін.

Klementová, Jarmila, Mariana Sedliačiková, Diana Hamary Gurova, and Denisa Mala. "Performance of processes in quality management of wood-processing enterprises." Global Journal of Business, Economics and Management: Current Issues 8, no. 2 (2018): 67–73. http://dx.doi.org/10.18844/gjbem.v8i2.3501.

Повний текст джерела

Анотація:

A measuring and evaluating of quality are critical factors that are responsible for customer satisfaction. The article deals with the issue of measuring and evaluating of processes` performance in quality management of Slovak wood-processing enterprises. A questionnaire method was used at primary level of information gathering. The questionnaire targeted 300 most significant Slovak wood-processing enterprises. It was found out that the most common methods of measuring and evaluating of processes` performance in quality management of Slovak wood-processing enterprises are universal indicators o

Стилі APA, Harvard, Vancouver, ISO та ін.

Imaekhai, Lawrence, and I. Sinatra Atemonokhai. "Pareto Analysis. A Categorical Imperative in the Evaluation of the Effectiveness of Engineering Production Processes." Research and Reviews on Experimental and Applied Mechanics 4, no. 2 (2021): 1–7. https://doi.org/10.5281/zenodo.5215896.

Повний текст джерела

Анотація:

This paper is centered on the use of Pareto Analysis for the illustration of categorical possibilities of evaluating the effectiveness of engineering production processes. This is achievable by employing progressive technologies in dividing materials on the specific component and the evaluation of its effectiveness and quality. In producing component the plasma, laser and water jet was the method employed. Pareto method was engaged in the elimination of the irregularities in quality of the resulting component. The aim is to determine the most efficient method using established evaluation m

Стилі APA, Harvard, Vancouver, ISO та ін.

Hsiao, Bo, and Li-Hsueh Chen. "Performance Evaluation for Taiwanese Hospitals by Multi-Activity Network Data Envelopment Analysis." International Journal of Information Technology & Decision Making 18, no. 03 (2019): 1009–43. http://dx.doi.org/10.1142/s0219622018500165.

Повний текст джерела

Анотація:

This study proposes an alternative method for evaluating the overall performance of hospitals in Taiwan. Specifically, three types of hospital activities, medical, pharmaceutical, and rehabilitation, are classified and connected using the parallel method. To bridge the difference between the performance evaluation methods adopted in hospitals and the evaluation method adopted by traditional enterprises, each activity is divided into two serial-type connected processes, which are the production and service processes. This study analyzes the performance of the six processes in three types of act

Стилі APA, Harvard, Vancouver, ISO та ін.

Omisore, Adedotun Olurin1* and Ogunola Zaccheaous Adekunle2. "CAPABILITY INDICES FOR INDUSTRIAL PRODUCTION PROCESS: A COMPARISON OF CLEMENT'S AND PERCENTILE APPROACHES." ISRG Journal of Multidisciplinary Studies (ISRGJMS) III, no. III (2025): 1–7. https://doi.org/10.5281/zenodo.14964653.

Повний текст джерела

Анотація:

Abstract The concept of process capability, rooted in statistical process control, emerged as a response to the growing need for systematic approaches to quality management. As industries evolve and consumer demands become more stringent, the need for effective tools to assess and improve process capability becomes increasingly apparent. Hence, this study delves into the context surrounding capability indices and the methodologies employed in evaluating industrial process capability when process data is not normal. In real life, industrial processes are not normally distri

Стилі APA, Harvard, Vancouver, ISO та ін.

Повний текст джерела

Анотація:

Стилі APA, Harvard, Vancouver, ISO та ін.

Ungarov, Jakhongir Yuldash o'gli, and Shakhzod Jumanazar o'gli Mamatkulov. "USE OF INTERNATIONAL STANDARDS OF AUTOMATION OF PRODUCTION PROCESSES." Academic Research Journal 2, no. 1 (2023): 178–83. https://doi.org/10.5281/zenodo.7581764.

Повний текст джерела

Анотація:

Disadvantages of the traditional approach to measurement uncertainty evaluation are analyzed. An algorithm for measurement uncertainty evaluation based on the Monte Carlo method is described, which makes it possible to eliminate these shortcomings. The results of a comparison of measurement uncertainty estimates obtained by the traditional method and the Monte Carlo method are presented. The need to revise the “Guide to the Expression of Uncertainty in Measurement” is substantiated and its current state is described.

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Дисертації з теми "Method for evaluating production processes"

Яшина, Тетяна Вікторівна, Татьяна Викторовна Яшина, Tetiana Viktorivna Yashyna та ін. "Розробка алгоритму оцінювання якості виробничих процесів". Thesis, Сумський державний університет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/66759.

Повний текст джерела

Анотація:

Високий рівень якості продукції на будь-якому сучасному підприємстві досягатися застосуванням прогресивних та ефективних підходів до методів її оцінювання, прогнозування та управління. Згідно з міжнародними стандартами [1], таким підходом являється забезпечення якості виробництва на всіх етапах життєвого циклу, як єдиної системи, спрямованої на отримання високоякісної продукції. Але методологія оцінювання процесів не визначена і не існує нормативного документу, який би регламентував порядок оцінювання якості процесів.

Стилі APA, Harvard, Vancouver, ISO та ін.

Beerli, Stefan. "A new method for evaluating two-loop Feynman integrals and its application to Higgs production /." Zürich : ETH, 2008. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=17967.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Dai, Bin. "The evaluation of a production scheduling heuristic for production lines with changeover costs and dependent parallel processors." Ohio : Ohio University, 1990. http://www.ohiolink.edu/etd/view.cgi?ohiou1183488445.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Yim, Sungshik. "A retrieval method (DF FRAMEWORK) for automated retrieval of design for additive manufacturing problems." Available online, Georgia Institute of Technology, 2007, 2007. http://etd.gatech.edu/theses/available/etd-03012007-113030/.

Повний текст джерела

Анотація:

Thesis (Ph. D.)--Mechanical Engineering, Georgia Institute of Technology, 2007. Nelson Baker, Committee Member ; Charles Eastman, Committee Member ; Christiaan Paredis, Committee Member ; Janet Allen, Committee Member ; David Rosen, Committee Chair.

Стилі APA, Harvard, Vancouver, ISO та ін.

Gössling, Stefan. "Entropy production as a measure for resource use method development and application to metallurgical processes /." [S.l.] : [s.n.], 2001. http://deposit.ddb.de/cgi-bin/dokserv?idn=969782470.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Rosén, Josefin. "Evaluating Innovation Readiness - A Case Study." Thesis, KTH, Integrerad produktutveckling, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-245199.

Повний текст джерела

Анотація:

To remain competitive and create a sustainable business, Original Equipment Manufacturers (OEMs) need to develop both incremental and radical innovation. What many companies struggle with is to evaluate the potential of innovation initiatives. The development of products and innovations has over the years changed from a traditional technocentric view into a more human-centered view with the user’s desirability in focus. Also, the increased global competition and interest in business model innovation are forcing companies to verify the viability of the offering to their customers. While Technol

Стилі APA, Harvard, Vancouver, ISO та ін.

Kosařová, Zuzana. "Využití metod štíhlé výroby na vybraném pracovišti." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2018. http://www.nusl.cz/ntk/nusl-377624.

Повний текст джерела

Анотація:

The diploma thesis is focused on proposal of workplace modification according to the lean manufacturing methodology (DMAIC). The target is to minimize the wasting and to increase the production efficiency based on LEAN tools implementation. The theoretical part of the thesis defines the basic terms, such as primarily lean production, DMAIC, wasting. In the practical part there is at problem analysis using the DMAIC method, then the proposal for improvement is solved, that contains reduction of wasting, process of the project, timetable, costs and implantation of the solution, finally there is

Стилі APA, Harvard, Vancouver, ISO та ін.

Ortega, Clavero Valentin. "A low-cost photonic method for monitoring different production processes involving contaminating materials using Fourier-Transform Raman spectroscopy." Thesis, Strasbourg, 2014. http://www.theses.fr/2014STRAD030/document.

Повний текст джерела

Анотація:

Dans ce travail de thèse, un spectromètre FT-Raman a été développé dans l'intention de mesurer les substances dangereuses de manière propre et durable permettant à l'utilisateur un cout d'utilisation réduit (approche low cost). Dans ce but, le système FT- Raman a été développé en utilisant une combinaison originale de composants conventionnels d'optoméchatronique avec laquelle nous proposons une méthode d'évaluation du spectre. Ce système FT-Raman proposé n'inclut aucun composants spécialisé coûteux et permet la détection de la diffusion Raman et le suivi du chemin optique. Le dispositif a été

Стилі APA, Harvard, Vancouver, ISO та ін.

Pearce, Eric L. "Designing active smart features to provide nesting forces in exactly constrained assemblies /." Diss., CLICK HERE for online access, 2003. http://contentdm.lib.byu.edu/ETD/image/etd202.pdf.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Turner, Lyle Robert. "Production structure models and applications within a Statistical Activity Cost Theory (SACT) Framework." Thesis, Queensland University of Technology, 2007. https://eprints.qut.edu.au/16310/1/Lyle_Turner_Thesis.pdf.

Повний текст джерела

Анотація:

Statistical Activity Cost Theory (SACT) is an axiomatic and statistical theory of basic accounting measurement practice. The aim of the SACT analysis, among others, is to determine the statistical nature of both the physical production system of an accounting entity and its related costs, which can then be examined and applied to various decision-making problems. A central proposition of SACT is that the physical system of the entity, and the costs related to this system, are separate structures which can be modelled as such. To date, however, mini- mal progress has been made in describing

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Книги з теми "Method for evaluating production processes"

Wheeler, Donald J. Evaluating the measurement process. 2nd ed. SPC Press, Inc., 1989.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Wheeler, Donald J. Evaluating the measurement process. 2nd ed. SPC Press, Inc., 1989.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Halevi, G. Restructuring the manufacturing process: Applying the matrix method. St. Lucie Press, 1999.

Знайти повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Kravchenko, Igor', Maksim Glinskiy, Sergey Karcev, Viktor Korneev, and Diana Abdumuminova. Resource-saving plasma technology in the repair of processing equipment. INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1083289.

Повний текст джерела

Анотація:

In the monograph methodological bases of selection of method of coating, design of technological processes of hardening and recovery of the wearing surfaces of parts using a systems engineering analysis and information support technologist. The mathematical model of plasma spraying of materials with different thermal conductivity and methods criteria for evaluation of technical and technological opportunities of a plasma coating method. Describes the methods and results of experimental studies, the analysis of the conditions and causes of loss of efficiency of processing equipment APK. The pro

Стилі APA, Harvard, Vancouver, ISO та ін.

Kuznecov, Vladimir, Aleksandr Cherepahin, and Igor' Koltunov. Technological processes of machine-building production. INFRA-M Academic Publishing LLC., 2023. http://dx.doi.org/10.12737/1026334.

Повний текст джерела

Анотація:

The textbook examines in detail the structure of the modern machine-building complex of Russia, outlines aspects of technological preparation of production and resource-saving technologies, classification, labeling and properties of basic structural materials, provides a methodology for system analysis of technological processes, processing methods and methods, describes traditional and modern technological processes for manufacturing machine parts. When considering each method and method of processing, the main emphasis was placed on the description of the main processing schemes, techn

Стилі APA, Harvard, Vancouver, ISO та ін.

Lebedev, Valeriy, Galina Prokopec, Yuriy Korol'kov, and Antonina Shishkina. Technological assurance of surface quality and operational properties of machine parts. INFRA-M Academic Publishing LLC., 2024. http://dx.doi.org/10.12737/1900534.

Повний текст джерела

Анотація:

The textbook considers a set of issues related to ensuring the quality of the surface and operational properties of machine parts at the stage of technological preparation of production. The role and importance of technological preparation of production in ensuring the life cycle of products are shown. The characteristic of the operational properties of machine parts is given, the physical essence of the processes and phenomena occurring in the surface layer of parts during their operation is revealed. The interrelation of the operational properties of machine parts with the surface quality is

Стилі APA, Harvard, Vancouver, ISO та ін.

Plaskova, Nataliya. Economic analysis and evaluation of the effectiveness of the organization's investment activities. INFRA-M Academic Publishing LLC., 2023. http://dx.doi.org/10.12737/1907632.

Повний текст джерела

Анотація:

The textbook contains theoretical, methodological and practical issues related to the formation of a reliable information and analytical base for managing the investment process at enterprises in the real sector of the economy. A set of methods of economic investment analysis is presented, which in business management practice make it possible to assess project risks and economic benefits at the stages of preparing investment projects to expand production activities, re-equip it with modern technologies and equipment, ensuring the strengthening of the competitiveness of project-building

Стилі APA, Harvard, Vancouver, ISO та ін.

Cevelev, Aleksandr. Material management of railway transport. INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1064961.

Повний текст джерела

Анотація:

In the monograph reviewed the development of the inventory management of railway transport in the new economic environment of market economy.  According to the results of theoretical research, innovative and production potential of the supply system of railway transport the main directions and methods of transformation of the restructuring process under the corporate changes of JSC "RZD", positioned value system of the logistics of railway transportation, and developed a classification model used logistical resources.  Evaluation of activity of structural divisions of Russian Railw

Стилі APA, Harvard, Vancouver, ISO та ін.

Ignatovich, Lyudmila, and Sergey Shet'ko. Technology of furniture production and joinery. INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1030852.

Повний текст джерела

Анотація:

In educational and methodical grant is considered in calculation of norms of consumption of basic and auxiliary materials; describes typical processes of manufacturing products from wood; the methodology of calculation of the annual program for the production unit and the method of determining the performance and the required number of process equipment; methodical instructions for determination of productivity of technological equipment and illustrates the design principles jobs; the technological modes of bonding and veneering; provides a summary of the requirements for analytical review on

Стилі APA, Harvard, Vancouver, ISO та ін.

Zuev, Sergey, Ruslan Maleev, and Viktor Venevcev. Reliability of electrical and electronic equipment of modern vehicles. INFRA-M Academic Publishing LLC., 2025. https://doi.org/10.12737/2130171.

Повний текст джерела

Анотація:

The textbook contains information on the reliability of electrical and electronic equipment of vehicles, provides basic terms and definitions, provides information on the reliability of non-removable products, and on the operating conditions of transport electronics products. Information on statistical process management is provided. The types, purpose, and organization of testing, methods for evaluating reliability indicators, and ways to improve reliability (redundancy) are described. The analysis of technological processes by the method of histograms is given. The concept of "reliability" i

Стилі APA, Harvard, Vancouver, ISO та ін.

Більше джерел

Частини книг з теми "Method for evaluating production processes"

Panda, Anton, Jozef Jurko, and Iveta Pandová. "Method for the Remuneration of Employees, Working in the Controlling System of a Manufacturing Process." In Monitoring and Evaluation of Production Processes. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-29442-1_10.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Biggeri, Luigi, Tiziana Laureti, and Luca Secondi. "Evaluating the Efficiency of the Italian University Educational Processes through Frontier Production Methods." In Advances in Theoretical and Applied Statistics. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-35588-2_41.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Gißke, Carola, Axel Fickert, and Hajo Wiemer. "Development of a System for the Evaluation and Recommendation of Solution Methods for Thermally Induced Errors on Machine Tools." In Lecture Notes in Production Engineering. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-34486-2_13.

Повний текст джерела

Анотація:

AbstractThermally-induced displacements cause large parts of residual machining errors on modern machine tools. Their transient behavior makes it difficult to manufacture with high accuracy. To still increase machining accuracy and to meet the demands of the industry, research offers various solution methods to minimize this error.Within the Collaborative Research Centre Transregio 96 (CRC/TR96), various solutions have been developed that either try to compensate the heat flow in the machine so that large temperature gradients and resulting displacements are avoided or aim to predict the amoun

Стилі APA, Harvard, Vancouver, ISO та ін.

Rautenstrauch, Anja, Larisa Markov, and Verena Kräusel. "Method for Evaluating and Identifying Energy-Efficient Process Chains for the Manufacturing of Press Hardening Tools Based on the Deming Circle." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-28839-5_54.

Повний текст джерела

Анотація:

AbstractIn response to rising energy demand, climate change and resource scarcity, the German government has set guiding targets for the transformation of energy systems by 2050. One goal is to increase energy efficiency in order to halve the demand for energy. An important instrument for increasing energy efficiency and reducing energy costs is the energy audit. By determining how much energy is consumed in which areas of the company, it is possible to identify where there is potential for savings. This paper presents an evaluation method for identifying energy-efficient process chains for th

Стилі APA, Harvard, Vancouver, ISO та ін.

Yi, L., X. Wu, M. Glatt, B. Ravani, and J. C. Aurich. "Framework to Improve the Energy Performance During Design for Additive Manufacturing." In Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-35779-4_12.

Повний текст джерела

Анотація:

AbstractAdditive manufacturing (AM) is suitable for designing and producing complex components that are difficult or impossible to manufacture with conventional manufacturing processes. To ensure the design benefits of AM, novel design approaches such as structural topology optimization and cellular structure design are widely used and bring up the research domain of design for AM (DfAM). However, conventional DfAM approaches mainly focus on the geometry and manufacturability of AM components and rarely consider energy performance as an improvement objective. Given that the energy consumption

Стилі APA, Harvard, Vancouver, ISO та ін.

Hogreve, Sebastian, Hannah Wallmeier, and Kirsten Tracht. "Evaluation of the Ergonomic Potential of Adaptive Assembly Jigs for Large-Scale Products Using Human Modelling." In Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2022. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-10071-0_18.

Повний текст джерела

Анотація:

AbstractThe implementation of plug and fly principles for the assembly of high-lift systems requires the design of new work processes and jigs. Conventional jigs are inflexibly and lag of capabilities to adapt for product and process designs. Adaptive jigs provide higher flexibility and allow workers to position the product in accordance with their personal needs. This paper presents a novel wheel-shaped adaptive jig and investigates its influence on the ergonomics of assembling a high-lift system. A CAD program is used to model the high-lift system, the adaptive jig and workers. Based on thes

Стилі APA, Harvard, Vancouver, ISO та ін.

Krauß, Florian. "To Be Continued: Conclusion and Outlook." In Television Drama from Germany. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-60622-9_9.

Повний текст джерела

Анотація:

AbstractThe concluding chapter highlights the broader transformation processes of television against which practitioners have negotiated the quality TV drama in Germany and its storytelling and screenwriting practices. Linked to the multiplication and expansion of the television landscape (in and beyond Germany), this final chapter addresses changes in distribution, in programmes, in production methods and especially in screenwriting as well as reception. The interviewed and observed TV practitioners repeatedly dealt with the socialisation of viewers in Germany, which is manifesting in increas

Стилі APA, Harvard, Vancouver, ISO та ін.

Ball, Adrian, John Zigman, Arman Melkumyan, Anna Chlingaryan, Katherine Silversides, and Raymond Leung. "Addressing Application Challenges with Large-Scale Geological Boundary Modelling." In Springer Proceedings in Earth and Environmental Sciences. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-19845-8_17.

Повний текст джерела

Анотація:

AbstractFor banded iron formation-hosted deposits accurate boundary modelling is critical to ore-grade estimation. Key to estimation fidelity is the accurate separation of the different domains within the ore body, requiring modelling of the boundaries between domains. This yields both theoretical and application challenges. We present a series of solutions for application challenges that arise when modelling large-scale boundaries employing a composition of Gaussian Process models on exploration and production hole data. We demonstrate these in the banded iron formation-hosted iron ore deposi

Стилі APA, Harvard, Vancouver, ISO та ін.

Viganò, Edoardo Luca, Erika Colombo, Davide Ballabio, and Alessandra Roncaglioni. "Artificial Intelligence Methods for Evaluating Mitochondrial Dysfunction: Exploring Various Chemical Notations Suitable for Neural Language Processing Models." In Lecture Notes in Computer Science. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-72381-0_10.

Повний текст джерела

Анотація:

AbstractIn recent years, the integration of Artificial Intelligence and Machine Learning methods, such as Neural Language Processing (NLP), with biochemical and biomedical research has revolutionized the field of toxicology defining a profound advancement in our understanding of the toxicological effects of diverse chemical compounds on biological systems.Among various toxic effects, mitochondrial dysfunction has emerged as a crucial endpoint due to its role in various diseases related to the liver, heart brain, and more in general related to different physiological processes. Indeed, mitochon

Стилі APA, Harvard, Vancouver, ISO та ін.

Miller, Eddi, Anna-Maria Schmitt, Tobias Kaupp, Rafael Batres, Andreas Schiffler, and Jan Schmitt. "A Peak Shaving Approach in Manufacturing Combining Machine Learning and Job Shop Scheduling." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-77429-4_59.

Повний текст джерела

Анотація:

AbstractComputerized Numerical Control (CNC) plays an important role in highly autonomous manufacturing systems with multiple machine tools. The necessary Numerical Control (NC) programs to manufacture the parts are mostly written in standardized G-code. An a priori evaluation of the energy demand of CNC-based machine processes opens up the possibility of scheduling multiple jobs according to balanced energy consumption over a production period. Due to this, we present a combined Machine Learning (ML) and Job-Shop-Scheduling (JSS) approach to evaluate G-code for a CNC-milling process with resp

Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Method for evaluating production processes"

Papavinasam, Sankara. "Standards for Evaluating Oil Field Corrosion Inhibitors in the Laboratory." In CORROSION 2014. NACE International, 2014. https://doi.org/10.5006/c2014-3980.

Повний текст джерела

Анотація:

Abstract The success of a corrosion inhibitor in controlling internal corrosion depends on (1) when the application of it has started, (2) efficiency of it, (3) interference of it with other chemicals and processes, and (4) presence of intact inhibitor film on the surface to be protected. Several standards and industry best practices are available to evaluate these properties. They include: ASTM(A) G170, “Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory”ASTM G184, “Standard Practice for Evaluating and Qualifying Oil Field and Refinery Co

Стилі APA, Harvard, Vancouver, ISO та ін.

Klenke, Karola, Christoph Bosch, Marc André Müller, Michael Müller, and Frank Hippenstiel. "Effect of Production Routes on SSC of 110 Ksi 13 Cr Super Martensitic Stainless Steel (SMSS)." In CORROSION 2018. NACE International, 2018. https://doi.org/10.5006/c2018-10956.

Повний текст джерела

Анотація:

Abstract 13Cr Super Martensitic Stainless Steel (SMSS) with a specified minimum yield (SMYS) of 110 ksi is commonly used in the Oil & Gas industry. The present work has been aimed at evaluating the influence of different heat treatment processes on the corrosion resistance of 110 ksi 13Cr SMSS. Bars were produced with a conventional QT process in gas fired batch furnaces as well as on an integrated forging line with inductive re-heating and direct quenching. The bars were tested according to NACE TM0177 Method A to prove the resistance to SSC. Tests were performed in several environments w

Стилі APA, Harvard, Vancouver, ISO та ін.

Thomson, Hunter, David Nichols, and Gordon M. Graham. "Evaluation of Scale and Corrosion Inhibitors Using a Jet Impingement Method." In CORROSION 2021. AMPP, 2021. https://doi.org/10.5006/c2021-16698.

Повний текст джерела

Анотація:

ABSTRACT Scale and corrosion testing under high shear flow conditions, and selection of effective inhibitors, is of increasing importance in oilfield production. Evaluation of inhibitors using an impinging jet technique to generate high shear conditions is well-known with regard to corrosion, but has recently been adapted to apply to inorganic scale processes. This paper demonstrates the utility of the technique in assessing scale deposition and corrosion in the same system and under the same hydrodynamic conditions, and the effect of inhibitors on the two processes. The results illustrate sca

Стилі APA, Harvard, Vancouver, ISO та ін.

Wen, Ching-Mei, Charles Foster, and Marianthi Ierapetritou. "Exploring Net-Zero Greenhouse Gas Emission Routes for Bio-Production of Triacetic Acid Lactone: An Evaluation through Techno-Economic Analysis and Life Cycle Assessment." In Foundations of Computer-Aided Process Design. PSE Press, 2024. http://dx.doi.org/10.69997/sct.182968.

Повний текст джерела

Анотація:

Triacetic acid lactone (TAL) is a bio-privileged molecule with potential as a chemical precursor, traditionally synthesized from petroleum. Current trends are shifting towards the use of renewable biomass or CO2-derived feedstocks to enhance sustainability. However, comprehensive studies on the techno-economic viability and carbon life cycle of such methods are limited. This study assesses TAL production from conventional glucose and a novel approach co-feeding Yarrowia lipolytica (YL) with glucose and formic acid (FA), aiming for a more cost-effective and eco-friendly process. We confront the

Стилі APA, Harvard, Vancouver, ISO та ін.

Russell, E. W., T. A. Nelson, H. A. Domian, D. F. LaCount, E. S. Robitz, and K. O. Stein. "Fabrication and Closure Development of Corrosion Resistant Containers for Nevada’s Yucca Mountain High-Level Nuclear Waste Repository." In CORROSION 1990. NACE International, 1990. https://doi.org/10.5006/c1990-90513.

Повний текст джерела

Анотація:

Abstract U.S. Congress and the President have determined that the Yucca Mountain site in Nevada is to be characterized to determine its suitability for construction of the first U.S. high-level nuclear waste repository. Work in connection with this site is carried out within the Yucca Mountain Project (YMP). Lawrence Livermore National Laboratory (LLNL) has the responsibility for designing, developing, and projecting the performance of the waste package for the permanent storage of high-level nuclear waste. Babcock & Wilcox (B&W) is involved with the YMP as a subcontractor to LLNL. B&a

Стилі APA, Harvard, Vancouver, ISO та ін.

Crista, Laura, Florin Crista, Isidora Radulov, Alina Lato, and Adina Berbecea. "ASSESSMENT OF THE IMPACT OF COMPLEX FOLIAR FERTILIZERS ON CORN (ZEA MAYS L.) PRODUCTIVITY." In 24th SGEM International Multidisciplinary Scientific GeoConference 2024. STEF92 Technology, 2024. https://doi.org/10.5593/sgem2024v/3.2/s12.25.

Повний текст джерела

Анотація:

This study investigates the effects of foliar fertilization (FF) on the yield and quality of corn grains, utilizing Principal Component Analysis (PCA) to optimize foliar treatment applications. The PCA approach enabled the identification of the most effective FF formulation for enhancing grain production and quality. The experiments were conducted in 2022 and 2023 at the university's experimental field, evaluating seven treatment variants, each with distinct chemical compositions labelled from V1 to V7, along with a control group. FF applications were carried out during the 15-16 BBCH and 20-2

Стилі APA, Harvard, Vancouver, ISO та ін.

Korobiichuk, Igor, Vladyslav Shybetskyi, Sergii Kostyk, Myroslava Kalinina, Dariia Hunchenko, and Zhanna Korobiichuk. "EVALUATION OF THE EFFICIENCY AND INTENSITY OF HOMOGENIZATION BY CHANGING THE GEOMETRY OF THE TURBINE IMPELLER BLADES." In SGEM International Multidisciplinary Scientific GeoConference 24. STEF92 Technology, 2024. https://doi.org/10.5593/sgem2024/6.1/s25.23.

Повний текст джерела

Анотація:

This article presents a numerical study of the effects of changing the geometry of the turbine impeller blades on the efficiency and intensity of homogenization in a bioreactor. The mixing of liquid media is an important stage of technological processes in various industries. Modern Impellers are equipped with homogenizing devices for introducing energy into the liquid, they include hydraulic, pneumatic and mechanical devices or their combinations. Rational selection of the mixing device at the design stage is important for the efficiency of the homogenizer and the entire production line. Four

Стилі APA, Harvard, Vancouver, ISO та ін.

Vollmuth, Pia, Hanna Hüttner, and Johannes Fottner. "Evaluating Changeable Production Logistics: A Multicriteria Approach." In 16th International Conference on Applied Human Factors and Ergonomics (AHFE 2025). AHFE International, 2025. https://doi.org/10.54941/ahfe1006448.

Повний текст джерела

Анотація:

In the ever-evolving production landscape characterised by various disruptions and uncertainties, the role of production logistics in ensuring operational efficiency is paramount. The increasing challenge is that production, and with it, the supplying production logistics must adapt to dynamic and unpredictable changes due to climate change, pandemics and other global conflicts. In the practice of many manufacturing companies, external consulting firms plan production logistics. They develop various planning alternatives, which are then evaluated by the company's internal teams based on multip

Стилі APA, Harvard, Vancouver, ISO та ін.

Mandolini, Marco, Federico Campi, Claudio Favi, and Michele Germani. "Manufacturing Processes Re-Engineering for Cost Reduction: The Investment Casting Case Study." In ASME 2019 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/detc2019-97532.

Повний текст джерела

Анотація:

Abstract The production cost is one of the most important drivers for product competitiveness. For increasing profits, a manufacturing process re-engineering is mandatory. This practice passes through systematic procedures for process selection, cost estimation and results analysis. This paper presents a method for evaluating different manufacturing alternatives for cost reduction. This method, composed of eight steps (most of them retrieved from the scientific literature), permits engineers to consider important aspects, such as the choice of cost estimation tools, the collection of data rela

Стилі APA, Harvard, Vancouver, ISO та ін.

Chan, Rothanak, Sriram Manoharan, and Karl R. Haapala. "Comparing the Sustainability Performance of Metal-Based Additive Manufacturing Processes." In ASME 2017 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/detc2017-68262.

Повний текст джерела

Анотація:

While there have been many advancements in additive manufacturing (AM) technologies for metal products, there has not been a great deal of attention paid toward developing an understanding of the relative sustainability performance of various AM processes for production of aerospace components, such as wire feed and powder bed fusion processes. This research presents a method to calculate and compare quantitative metrics for evaluating metal AM process on a basis of sustainability performance. The process-level evaluation method encompasses a triple bottom line analysis for low volume part pro

Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Method for evaluating production processes"

Friedman, Shmuel, Jon Wraith, and Dani Or. Geometrical Considerations and Interfacial Processes Affecting Electromagnetic Measurement of Soil Water Content by TDR and Remote Sensing Methods. United States Department of Agriculture, 2002. http://dx.doi.org/10.32747/2002.7580679.bard.

Повний текст джерела

Анотація:

Time Domain Reflectometry (TDR) and other in-situ and remote sensing dielectric methods for determining the soil water content had become standard in both research and practice in the last two decades. Limitations of existing dielectric methods in some soils, and introduction of new agricultural measurement devices or approaches based on soil dielectric properties mandate improved understanding of the relationship between the measured effective permittivity (dielectric constant) and the soil water content. Mounting evidence indicates that consideration must be given not only to the volume frac

Стилі APA, Harvard, Vancouver, ISO та ін.

Torrijos, Ivan Dario Pinerez, Tina Puntervold, Skule Strand, Panagiotis Aslanidis, Ingebret Fjelde, and Aleksandr Mamonov. Core restoration: A guide for improved wettability assessments. University of Stavanger, 2021. http://dx.doi.org/10.31265/usps.198.

Повний текст джерела

Анотація:

The initial wetting of a reservoir sets a limit for the EOR potential during water-based recovery operations and “Smart Water” injection. For this reason, an improved understanding of the factors influencing the wetting can help to control and better forecast oil production during water-based floods. To preserve and reproduce the original reservoir wettability is a challenging task and wrong cleaning and core restoration procedures can lead to incorrect wettability estimations and thus induce serious errors when evaluating the initial wettability of a reservoir system or its EOR potential by w

Стилі APA, Harvard, Vancouver, ISO та ін.

Munoz, Dominic, Victor Cruz, William Waller, and Mark Bendorf. A Method for Evaluating and Tracking Production-Sample Test (PST) Delay Risk. Office of Scientific and Technical Information (OSTI), 2021. http://dx.doi.org/10.2172/1842270.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Холошин, Ігор Віталійович, Наталя Борисівна Пантелєєва, Олександр Миколайович Трунін, Людмила Володимирівна Бурман, and Ольга Олександрівна Калініченко. Infrared Spectroscopy as the Method for Evaluating Technological Properties of Minerals and Their Behavior in Technological Processes. E3S Web of Conferences, 2020. http://dx.doi.org/10.31812/123456789/3929.

Повний текст джерела

Анотація:

Infrared spectroscopy (IR) is a highly effective method for the analysis of minerals, rocks and ores, capable of solving a whole range of problems when choosing innovative solutions for the technological processing of various types of mineral raw materials. The article considers the main directions of using the infrared spectroscopy method in assessing the technological properties of minerals and their behavior in technological processes: evaluation of the grade (quality) of mineral raw materials; analysis of the behavior of minerals in the technological process with prediction of their techno

Стилі APA, Harvard, Vancouver, ISO та ін.

Jones. L51751 Evaluation of Low Hydrogen Welding Processes for Pipeline Construction in High Strength Steel. Pipeline Research Council International, Inc. (PRCI), 1996. http://dx.doi.org/10.55274/r0010220.

Повний текст джерела

Анотація:

As the use of higher strength and thicker walled pipe becomes more prevalent, the procedures that would normally guard against hydrogen cracking when welding with cellulosic electrodes, become less effective and it has become necessary to investigate the use of alternative low hydrogen consumables. Low hydrogen manual welding processes, suitable for pipeline girth welding, have been available for some time for the lower strength pipe grades, and latterly, for high strength pipelines (up to and including X80). Despite their availability and advantages in terms of reduced crack susceptibility, t

Стилі APA, Harvard, Vancouver, ISO та ін.

Máñez Costa, Maria, Amy M. P. Oen, Tina-Simone Schmid Neset, et al. Co-production of Climate Services : A diversity of approaches and good practice from the ERA4CS projects (2017–2021). Linköping Univeristy Electronic Press, 2022. http://dx.doi.org/10.3384/9789179291990.

Повний текст джерела

Анотація:

This guide presents a joint effort of projects funded under the European Research Area for Climate Services (ERA4CS) (http://www.jpi-climate.eu/ERA4CS), a co- funded action initiated by JPI Climate with co-funding by the European Union (Grant 690462), 15 national public Research Funding Organisations (RFOs), and 30 Research Performing Organisations (RPOs) from 18 European countries. This guide sets out to increase the understanding of different pathways, methods, and approaches to improve knowledge co-production of climate services with users as a value-added activity of the ERA4CS Programme.

Стилі APA, Harvard, Vancouver, ISO та ін.

Adam, Gaelen P., Melinda Davies, Jerusha George, et al. Machine Learning Tools To (Semi-) Automate Evidence Synthesis. Agency for Healthcare Research and Quality (AHRQ), 2025. https://doi.org/10.23970/ahrqepcwhitepapermachine.

Повний текст джерела

Анотація:

Introduction. Tools that leverage machine learning, a subset of artificial intelligence, are becoming increasingly important for conducting evidence synthesis as the volume and complexity of primary literature expands exponentially. In response, we have created a living rapid review and evidence map to understand existing research and identify available tools. Methods. We searched PubMed, Embase, and the ACM Digital Library from January 1, 2021, to April 3, 2024, for comparative studies, and identified older studies using the reference lists of existing evidence synthesis products (ESPs). We p

Стилі APA, Harvard, Vancouver, ISO та ін.

Adam, Gaelen, Melinda Davies, Jerusha George, et al. Machine Learning Tools To (Semi-)Automate Evidence Synthesis: A Rapid Review and Evidence Map. AHRQ, 2025. https://doi.org/10.23970/ahrqepcwhitepapermachine2.

Повний текст джерела

Анотація:

Introduction. Tools that leverage machine learning, a subset of artificial intelligence, are becoming increasingly important for conducting evidence synthesis as the volume and complexity of primary literature expands exponentially. In response, we have created a living rapid review and evidence map to understand existing research and identify available tools. Methods. We searched PubMed, Embase, and the ACM Digital Library from January 1, 2021, to April 3, 2024, with update searches on October 3, 2024, and April 3, 2025, for comparative studies, and identified older studies using the referenc

Стилі APA, Harvard, Vancouver, ISO та ін.

Oliver, Sandy, David Gough, and James Copestake. Approaches to evidence synthesis in international development. Centre for Excellence and Development Impact and Learning (CEDIL), 2017. http://dx.doi.org/10.51744/cpip3.

Повний текст джерела

Анотація:

This paper discusses the spectrum of synthesis methods available to generate, explore and test theory, their value to the field of international development and innovations required to make better use of the primary research available. It goes further than setting substantive priorities for international development impact and learning. It addresses current advances and priority gaps in the methods for research before considering the substantive and methodological direction of evidence synthesis for impact evaluation in international development, particularly as this relates to the work of CED

Стилі APA, Harvard, Vancouver, ISO та ін.

Saldivar-Carranza, Enrique D., Tom Platte, Terri Wills, James Sturdevant, and Darcy M. Bullock. Business Processes to Prioritize Traffic Signal Retiming and Assess the Impact of Retiming Activities. Purdue University, 2025. https://doi.org/10.5703/1288284317807.

Повний текст джерела

Анотація:

The Indiana Department of Transportation (INDOT) manages over 2,000 traffic signals in the State. It is unfeasible to identify systemwide improvement opportunities by evaluating the performance of thousands of traffic signals on monitoring dashboards. This report describes how a scalable technique based on connected vehicle (CV) trajectory data systematically evaluates performance at the movement level to prioritize retiming and maintenance activities. In total, eleven timing changes were implemented at nine traffic signals over various time-of-day (TOD) periods using the proposed approach. Th

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!