Einloggen

Thematische Bibliographien / Computer controlled testing / Zeitschriftenartikel

Um die anderen Arten von Veröffentlichungen zu diesem Thema anzuzeigen, folgen Sie diesem Link: Computer controlled testing.

Zeitschriftenartikel zum Thema „Computer controlled testing“

Autor: Grafiati

Veröffentlicht am 28. Juni 2021

Zuletzt aktualisiert am 29. Juli 2025

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit Top-50 Zeitschriftenartikel für die Forschung zum Thema "Computer controlled testing" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Sehen Sie die Zeitschriftenartikel für verschiedene Spezialgebieten durch und erstellen Sie Ihre Bibliographie auf korrekte Weise.

1

Kuiper, A. C. J., R. E. F. Einerhand, and W. Visscher. "Computer controlled testing of batteries." Computers & Chemistry 13, no. 1 (1989): 69–73. http://dx.doi.org/10.1016/0097-8485(89)80030-0.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

2

Shafer, Steven L., Lawrence C. Siegel, James E. Cooke, and James C. Scott. "Testing Computer-controlled Infusion Pumps by Simulation." Anesthesiology 68, no. 2 (1988): 261–66. http://dx.doi.org/10.1097/00000542-198802000-00013.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

3

SEVERNS, MATTHEW L. "A Computer Controlled Attenuator for Audiological Testing." Journal of Clinical Engineering 10, no. 4 (1985): 317–22. http://dx.doi.org/10.1097/00004669-198510000-00007.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

4

K. M. Coyne, A. T. Johnson, and L. R. Soma. "Computer-controlled Rebreathing System for Equine Exercise Testing." Transactions of the ASAE 39, no. 5 (1996): 1863–68. http://dx.doi.org/10.13031/2013.27664.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

5

Swinth, K. L., and D. R. Sisk. "Computer-controlled testing and calibration of health physics instruments." IEEE Transactions on Nuclear Science 35, no. 1 (1988): 567–70. http://dx.doi.org/10.1109/23.12787.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

6

Smith, J. J., and W. C. Greene. "Computer-Controlled Equipment Testing: Speed, Accuracy and Improved Analysis." Naval Engineers Journal 110, no. 1 (1998): 207–15. http://dx.doi.org/10.1111/j.1559-3584.1998.tb02397.x.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

7

Tietze, M. "Hot wire inspection by computer-controlled eddy current testing." NDT & E International 24, no. 6 (1991): 326. http://dx.doi.org/10.1016/0963-8695(91)90076-f.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

8

Rediniotis, Othon K. "A Computer-Controlled Pressure Standard." Journal of Fluids Engineering 121, no. 1 (1999): 210–12. http://dx.doi.org/10.1115/1.2822006.

Der volle Inhalt der Quelle

Annotation:

The operating principles, as well as the technical aspects of the implementation of a new computer-controlled pressure standard are presented. The instrument can have dual use: either as a pressure source or as a pressure sensor. The device is intended mostly for use in problems where small differential pressures are of interest, i. e., 0–2.5 KPa and high accuracy is desired. Such a pressure range encompasses, for example, most of the pressure measurement applications in subsonic wind-tunnel testing. The device interfaces to a PC and is ideal for fully-automated pressure transducer calibration

APA, Harvard, Vancouver, ISO und andere Zitierweisen

9

Thomas, Roger J., Geraldine A. Wright, and Charles M. Fleetwood. "Computer controlled polishing and testing of a glancing incidence telescope." Applied Optics 25, no. 16 (1986): 2835. http://dx.doi.org/10.1364/ao.25.002835.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

10

Borkowski, P., D. Boczkowski, and T. Wysocki. "Computer-controlled system for testing contacts on switching high current." Measurement 40, no. 3 (2007): 294–99. http://dx.doi.org/10.1016/j.measurement.2006.05.017.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

11

Stefanson, J. R. W., and William A. Ahroon. "Computer-controlled audiometer's application as an earplug fit-testing tool." Journal of the Acoustical Society of America 140, no. 4 (2016): 3274–75. http://dx.doi.org/10.1121/1.4970399.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

12

Rybalev, A. N. "IMPLEMENTATION AND COMPUTER MODELING OF DISTURBANCE COMPENSATION ALGORITHMS FOR PROGRAMMABLE LOGICAL CONTROLLERS." Informatika i sistemy upravleniya 4 (2020): 37–48. http://dx.doi.org/10.22250/isu.2020.66.37-48.

Der volle Inhalt der Quelle

Annotation:

The paper proposes approaches to the software implementation of disturbance compensation systems on programmable logic controllers (PLCs) and to the testing of synthesized systems on combined models, including a simulation model of the controlled unit and a virtual controller. Separate examina-tion is given to a case when the theoretically calculated compensator is impracticable

APA, Harvard, Vancouver, ISO und andere Zitierweisen

13

CAI, KAI-YUAN, TSONG YUEH CHEN, YONG-CHAO LI, YUEN TAK YU, and LEI ZHAO. "ON THE ONLINE PARAMETER ESTIMATION PROBLEM IN ADAPTIVE SOFTWARE TESTING." International Journal of Software Engineering and Knowledge Engineering 18, no. 03 (2008): 357–81. http://dx.doi.org/10.1142/s0218194008003696.

Der volle Inhalt der Quelle

Annotation:

Software cybernetics is an emerging area that explores the interplay between software and control. The controlled Markov chain (CMC) approach to software testing supports the idea of software cybernetics by treating software testing as a control problem, where the software under test serves as a controlled object modeled by a controlled Markov chain and the software testing strategy serves as the corresponding controller. The software under test and the corresponding software testing strategy form a closed-loop feedback control system. The theory of controlled Markov chains is used to design a

APA, Harvard, Vancouver, ISO und andere Zitierweisen

14

Mrozek, Ireneusz, and Vyacheslav Yarmolik. "Multiple Controlled Random Testing*." Fundamenta Informaticae 144, no. 1 (2016): 23–43. http://dx.doi.org/10.3233/fi-2016-1322.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

15

GOPALARATNAM, VELLORE S., and GWO-SYANG YANG. "Flexible Automation for Servo-Controlled Testing." Computer-Aided Civil and Infrastructure Engineering 5, no. 3 (1990): 229–43. http://dx.doi.org/10.1111/j.1467-8667.1990.tb00379.x.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

16

Jywe, W. "Study using position silicon detectors for performance testing of computer numerically controlled machine tools." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 216, no. 5 (2002): 725–33. http://dx.doi.org/10.1243/0954405021520418.

Der volle Inhalt der Quelle

Annotation:

In this paper, various contouring test systems for computer numerically controlled (CNC) machine tools are reviewed. It is the first time a laser diode and a quadrant sensor have been employed to build a simple contouring measuring system for testing dynamic performance of a CNC machine tool. The experimental work on a CNC machine tool with a Fanuc OM controller for various contouring paths under specified feed rates is carried out. Then, the compensation work is executed with the assistance of this developed contouring system. After the compensation, the contouring error, especially at a high

APA, Harvard, Vancouver, ISO und andere Zitierweisen

17

Grishaber, R. B., R. H. Lu, D. M. Farkas, and A. K. Mukherjee. "A novel computer controlled constant stress lever arm creep testing machine." Review of Scientific Instruments 68, no. 7 (1997): 2812–17. http://dx.doi.org/10.1063/1.1148200.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

18

Talbot, T. L., W. H. Schuette, H. W. Tipton, L. E. Thibault, F. L. Brown, and R. M. Winslow. "Noninvasive detection of the anaerobic threshold during computer-controlled exercise testing." Medical and Biological Engineering and Computing 23, no. 6 (1985): 579–84. http://dx.doi.org/10.1007/bf02455313.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

19

Nitinawarat, Sirin, George K. Atia, and Venugopal V. Veeravalli. "Controlled Sensing for Multihypothesis Testing." IEEE Transactions on Automatic Control 58, no. 10 (2013): 2451–64. http://dx.doi.org/10.1109/tac.2013.2261188.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

20

Polianskis, Romanas, Thomas Graven-Nielsen, and Lars Arendt-Nielsen. "Computer-controlled pneumatic pressure algometry-a new technique for quantitative sensory testing." European Journal of Pain 5, no. 3 (2001): 267–77. http://dx.doi.org/10.1053/eujp.2001.0245.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

21

Viviani, P. "Testing the kinaesthetic and motor control systems with computer-controlled mechanical stimuli." Electroencephalography and Clinical Neurophysiology 103, no. 1 (1997): 46. http://dx.doi.org/10.1016/s0013-4694(97)88111-8.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

22

Sakai, S., T. Asakawa, and H. Okamura. "COMPUTER-CONTROLLED ELASTIC-PLASTIC FATIGUE CRACK GROWTH TESTING USING MULTI-TASK PROGRAMMING." Experimental Techniques 22, no. 3 (1998): 26–31. http://dx.doi.org/10.1111/j.1747-1567.1998.tb01281.x.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

23

Gaffan, E. A., and M. J. Eacott. "A computer-controlled maze environment for testing visual memory in the rat." Journal of Neuroscience Methods 60, no. 1-2 (1995): 23–37. http://dx.doi.org/10.1016/0165-0270(94)00216-4.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

24

Sikoryn, T. A., R. M. Aspden, and D. W. L. Hukins. "Simple computer controlled apparatus for in vitro mechanical testing of connective tissues." Journal of Biomedical Engineering 10, no. 4 (1988): 357–59. http://dx.doi.org/10.1016/0141-5425(88)90069-6.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

25

Aspden, R. M., T. Larsson, R. Svensson, and D. Heinegård. "Computer-controlled mechanical testing machine for small samples of biological viscoelastic materials." Journal of Biomedical Engineering 13, no. 6 (1991): 521–25. http://dx.doi.org/10.1016/0141-5425(91)90102-d.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

26

Guo, Gao Feng, Ang Ran Dong, En Li, and Chong Gao. "Material Testing Based on Cylindrical Cavity." Key Engineering Materials 723 (December 2016): 166–70. http://dx.doi.org/10.4028/www.scientific.net/kem.723.166.

Der volle Inhalt der Quelle

Annotation:

This design of alcohol detection system uses DSP technology, ADF4350 frequency synthesizer chip developed microwave source controlled by DSP controller, the source excites the microwave resonator cavity, the output signal of the resonator is detected by the detector, then sampled and processed by the DSP processor, and the concentration of alcohol is calculated by perturbation theory and dielectric properties of alcohol. The human-computer interaction of this system is realized by touch screen, so that the display looks easy to operate and very user-friendly. This paper analyzes the feasibilit

APA, Harvard, Vancouver, ISO und andere Zitierweisen

27

Yang, Xiao Qiang, Ya Ming Gao, Ying Liu, and Jun Han. "Study on Universal Testing Platform of Engineering Machinery." Applied Mechanics and Materials 33 (October 2010): 544–48. http://dx.doi.org/10.4028/www.scientific.net/amm.33.544.

Der volle Inhalt der Quelle

Annotation:

Due to the multiple types and complexity of fault diagnosis, the general-purpose testing platform of engineering machinery’s hydraulic system is developed for the maintenance of military equipment. The general function and structure of the testing platform is presented. The hardware system consists of modular circuit, integrates control computer of embedded controller with PXI-interfaced modular instrument, program-controlled device, connector and adapter hardware. And the software program comprises data management module, fault diagnosis module coupled to the data acquisition module, signal p

APA, Harvard, Vancouver, ISO und andere Zitierweisen

28

Sharma, Ravi Babu, and Jitendra Kumar Rai. "Design & Development of a Computer Controlled Tensile Strength Testing Machine for Testing of Strings & Fabrics." International Journal of Advanced Engineering Research and Science 8, no. 8 (2021): 402–9. http://dx.doi.org/10.22161/ijaers.88.45.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

29

Schichl, K., and K. Affeld. "A Computer Controlled Versatile Pulse Duplicator for Precision Testing of Artificial Heart Valves." International Journal of Artificial Organs 16, no. 10 (1993): 722–28. http://dx.doi.org/10.1177/039139889301601009.

Der volle Inhalt der Quelle

Annotation:

Numerous devices and mock circulations have been described for the measurement of pressure loss, closure time, closing and leakage volumes and energy loss in artificial heart valves. However, all the devices have been troubled with difficulties in generating and assessing the precise flow through the valve, and problems in defining the arterial load, i.e. the artificial aorta. The new test device follows a radically different approach: a computer controlled piston forces the fluid through the test valve only — with no afterload. During systole, outflow follows a physiological curve which is id

APA, Harvard, Vancouver, ISO und andere Zitierweisen

30

Steinmeyer, J. "A computer-controlled mechanical culture system for biological testing of articular cartilage explants." Journal of Biomechanics 30, no. 8 (1997): 841–45. http://dx.doi.org/10.1016/s0021-9290(97)00040-7.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

31

Kozyrev, N. A., R. A. Shevchenko, A. A. Usol’tsev, A. N. Prudnikov, and L. P. Bashchenko. "Welding of differentially heat-strengthened rails. Industrial testing." Izvestiya. Ferrous Metallurgy 63, no. 5 (2020): 305–12. http://dx.doi.org/10.17073/0368-0797-2020-5-305-312.

Der volle Inhalt der Quelle

Annotation:

The article describes the study of welding processes with the subsequent control of cooling of full-profile rail joints, produced by passing alternating electric current pulses after welding. The influence of welding modes on the quality of welded joint was investigated. Welding was carried out on a resistance butt welding machine MCP-6301 in conditions of the rail welding company LLC “RSP-M” (RSP-29). For research, the samples of P65 type full-profile rails of DT350 category 600 mm long were cut out. The isothermal holding conditions after welding were controlled using a personal computer wit

APA, Harvard, Vancouver, ISO und andere Zitierweisen

32

Więckowski, Andrzej. "Prototypowy manipulator ja-wa do automatycznego betonowania ścian." Przegląd Naukowy Inżynieria i Kształtowanie Środowiska 26, no. 2 (2017): 276–84. http://dx.doi.org/10.22630/pniks.2017.26.2.27.

Der volle Inhalt der Quelle

Annotation:

In the context of automatic construction of buildings analyzed prototype, ja-wa system, which integrates aspects of computer controlling the manipulator of the testing of allowable construction progress (according to the results of the analysis rise the endurance of the young concrete, laid in layers made earlier). Imposing of concrete mix (controlled intervals) with finish a surface septum is performed by a computer-controlled manipulator-machine, which moves the track system ferry. Indicated rationality and low capital intensity of solutions.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

33

Žliobaitė, Indrė. "Controlled permutations for testing adaptive learning models." Knowledge and Information Systems 39, no. 3 (2013): 565–78. http://dx.doi.org/10.1007/s10115-013-0629-7.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

34

J., Kalivoda, and Bauer P. "ROLLER RIG TESTING AT THE CZECH TECHNICAL UNIVERSITY." Science and Transport Progress. Bulletin of Dnipropetrovsk National University of Railway Transport, no. 4(64) (August 25, 2016): 125–33. https://doi.org/10.15802/stp2016/77994.

Der volle Inhalt der Quelle

Annotation:

<strong>Purpose. </strong>Although the advancements in computer simulation technology have paved way to provide very reliable simulation results, track tests still play an essential role during the process of development and homologation of any railway vehicle. On the other hand, track tests depend on weather conditions, are difficult to organize and are not suitable for testing vehicles in critical situations. On a roller rig, the tested vehicle is longitudinally fixed and a track is replaced by rotating rollers. Such device offer testing of railway vehicle running dynamics in safe and s

APA, Harvard, Vancouver, ISO und andere Zitierweisen

35

Bedi, S., W. Chernoff, and G. W. Vickers. "Computer-aided Fairing and Direct Numerically Controlled Machining of Ship Hull Hydrodynamic Testing Models." Transactions of the Canadian Society for Mechanical Engineering 12, no. 1 (1988): 43–48. http://dx.doi.org/10.1139/tcsme-1988-0007.

Der volle Inhalt der Quelle

Annotation:

A computer-aided method of defining and machining 2-metre ship hull forms for hydrodynamic testing is described. The hull shape is faired from the original table of off-sets using a minimum number of smooth three-dimensional parametric skeletal-lines along the length of the boat. A fine set of smoothly blending station-lines is therby formed. The hull shape is preformed in two halves through a lamination process and machined on a three-axis numerically controlled machining (CNC) centre. A carbide-tipped, end-milling cutter is directed along the closely spaced station-lines to rapidly form an a

APA, Harvard, Vancouver, ISO und andere Zitierweisen

36

Assink, Egbert, and Jan Van Der Linden. "Computer Controlled Spelling Instruction: A Case Study in Courseware Design." Journal of Educational Computing Research 9, no. 1 (1993): 17–28. http://dx.doi.org/10.2190/ct2y-q5c9-02h5-vw7q.

Der volle Inhalt der Quelle

Annotation:

The research project “Feedback Processes in Computer Managed Spelling Instruction” was aimed at developing and testing an instructional software program for teaching the orthography of Dutch verbs. The main focus of this article is on how to design an optimal learning environment. The design of human-computer interaction is highlighted from a number of respects: the sequencing of the learning content, the presentation of information on the screen, and the format of student input and feedback. The program consists of seven instructional modules. In each module, a specific grammatical operation,

APA, Harvard, Vancouver, ISO und andere Zitierweisen

37

Aydilek, AH, and ME Kutay. "Development of an Innovative Computer-Controlled Water Deairing System for Hydraulic Testing of Geosynthetics." Journal of Testing and Evaluation 32, no. 2 (2004): 11852. http://dx.doi.org/10.1520/jte11852.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

38

Marshall, W. G., R. Leek, M. J. Pilkington, and N. A. Hampson. "A computer-controlled discharge unit for the testing of nickel—cadmium cells and batteries." Journal of Power Sources 16, no. 2 (1985): 119–30. http://dx.doi.org/10.1016/0378-7753(85)80085-9.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

39

Porumb, Vlad, Alexandru Florentin Trandabăț, Cristina Terinte, et al. "Design and Testing of an Experimental Steam-Induced Burn Model in Rats." BioMed Research International 2017 (2017): 1–10. http://dx.doi.org/10.1155/2017/9878109.

Der volle Inhalt der Quelle

Annotation:

Background. Most of the current models for experimental burns pose difficulties in ensuring consistency and standardization.Aim of Study. We aimed to develop an automated, reproducible technique for experimental burns using steam-based heat transfer.Methods. The system developed for steam exposure was based on a novel, integrated, computer-controlled design. Three groups of rats were exposed to steam for 1, 3, and 7 seconds. The lesions were evaluated after 20 minutes, 48 hours, and 72 hours after burn induction.Results. One-second steam application produced a superficial second-degree burn; t

APA, Harvard, Vancouver, ISO und andere Zitierweisen

40

Nicholson, P. G., R. B. Seed, and H. A. Anwar. "Elimination of membrane compliance in undrained triaxial testing.II. Mitigation by injection compensation." Canadian Geotechnical Journal 30, no. 5 (1993): 739–46. http://dx.doi.org/10.1139/t93-066.

Der volle Inhalt der Quelle

Annotation:

A computer-controlled injection-correction system has been developed to continuously and completely mitigate the adverse effects of membrane compliance for undrained testing of granular soils. The system was developed with the explicit idea that it could be quickly and easily adapted to most any up to date triaxial testing apparatus. A relationship between effective confining stress and volumetric compliance can be predetermined, as volumetric-compliance errors have been shown to be a direct and repeatable function of effective confining stresses for a given material. The predetermination of v

APA, Harvard, Vancouver, ISO und andere Zitierweisen

41

Hua, Zi Kai, and Yong Wei Fan. "A New Ortho-POD Biotribometer for Orthopaedic Biomaterials Wear Testing." Applied Mechanics and Materials 461 (November 2013): 367–72. http://dx.doi.org/10.4028/www.scientific.net/amm.461.367.

Der volle Inhalt der Quelle

Annotation:

Wear has been the primary failure mode affecting the long-term performance of orthopaedic implants. The tribological evaluation of orthopaedic biomaterials in vitro is regarded as an essential material characterization before implantation. In this paper, a new biotribometer of pin-on-disk type, the Ortho-POD, was designed and built for the biotribological tests of orthopaedic biomaterials. The primary goal of developing this Ortho-POD is to simulate and predict the wear properties of orthopaedic biomaterials in clinical application, especially in the form of hip, knee and spine prostheses. Thi

APA, Harvard, Vancouver, ISO und andere Zitierweisen

42

Chaulagain, Raj Kumar, Gaurav Dahal, Alkesh Nepal, Amrit Tiwari, and Pramod Regmi. "Performance Testing of Foldable Electric Powered Wheelch." Journal of Innovations in Engineering Education 3, no. 1 (2020): 115–22. http://dx.doi.org/10.3126/jiee.v3i1.34332.

Der volle Inhalt der Quelle

Annotation:

This paper aims to design and test a foldable, lightweight wheelchair propelled by a pair of electric motors. Starting from literature review, the research team carried out the design and solid modeling of proposed wheelchair. Solidworks software was used to make the computer model. The wheelchair frame comprised of a chair like frame with two pairs of wheels on front and back. The defined electric wheelchair is completed with the coordination of manual and electric system. A pair of electric motor is fitted on wheels at backside which are controlled by the electronic controller powered by the

APA, Harvard, Vancouver, ISO und andere Zitierweisen

43

Mackey, N. A., A. H. Ilsley, H. Owen, and J. L. Plummer. "Laboratory Evaluation of the Go Medical PCI: A Disposable Patient-Controlled Analgesia Device." Anaesthesia and Intensive Care 21, no. 2 (1993): 204–7. http://dx.doi.org/10.1177/0310057x9302100213.

Der volle Inhalt der Quelle

Annotation:

A low-cost, disposable patient-controlled analgesia device was tested using a computer-controlled, automated testing station designed to simulate clinical use. Five devices were tested and delivered a mean bolus dose size of 95% of nominal, although one device achieved only 85% of nominal. Delivery was lowest immediately following an eight-hour interval during which no demands were made. Further development and evaluation of this interesting device is warranted.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

44

Zhou, Qiang, and Feng Wei Si. "Research on Multi-Channels Data Selector of Telemetry Data of BMK." Applied Mechanics and Materials 475-476 (December 2013): 236–42. http://dx.doi.org/10.4028/www.scientific.net/amm.475-476.236.

Der volle Inhalt der Quelle

Annotation:

To meet the requirement of testing project which multiple sets of devices need to be tested in one temperature test, a kind of data selector has been designed. The data selector can be controlled in computer-programs method or in manual method. It is composed of FPGA module, channel gating controller module, data receiving module, data retransmission module, indicator light module and power supply module. As the core of this testing device is designed as FPGA, its flexibility and simplicity has been enhanced. At the same time, the delay time of each channel can be set so that the precision in

APA, Harvard, Vancouver, ISO und andere Zitierweisen

45

Henry, James A., Stephen A. Fausti, Christopher L. Flick, Wendy J. Helt, and Roger M. Ellingson. "Computer-Automated Clinical Technique for Tinnitus Quantification." American Journal of Audiology 9, no. 1 (2000): 36–49. http://dx.doi.org/10.1044/1059-0889(2000/002).

Der volle Inhalt der Quelle

Annotation:

This study addresses the need for uniformity in techniques for clinical quantification of tinnitus. Because automation can be an effective means to achieve standardization, this laboratory is developing techniques to perform computer-automated tinnitus testing. The present study was conducted to demonstrate the feasibility of obtaining reliable tinnitus measures using a fully automated system. A computer-controlled psychoacoustical system was developed to quantify tinnitus loudness and pitch using a tone-matching technique. Hearing thresholds were also obtained as part of the procedure. The sy

APA, Harvard, Vancouver, ISO und andere Zitierweisen

46

Haroon, Dr A. Syed. "Affordable Eye-Controlled Mouse: Enhancing Accessibility with Mediapipe and OpenCV." International Journal for Research in Applied Science and Engineering Technology 13, no. 4 (2025): 4785–88. https://doi.org/10.22214/ijraset.2025.69278.

Der volle Inhalt der Quelle

Annotation:

This work introduces a new eye-controlled mouse technology that enables hands-free human-computer interaction. For people with physical restrictions, the system offers a useful and reasonably priced substitute by utilizing Mediapipe's advanced face mesh detection, OpenCV, and PyAutoGUI. The system includes features like fatigue monitoring, blink-based click recognition, and fluid cursor transitions to enhance usability. It transforms eye movements in real time into cursor control. Extensive testing demonstrated dependable performance with excellent responsiveness and mouse tracking accuracy ac

APA, Harvard, Vancouver, ISO und andere Zitierweisen

47

Tarczyński, W., T. Hejman, and D. Smugała. "Computer-controlled testing system for investigating the dynamic characteristics of contactors with A.C. electromagnet drives." Measurement 33, no. 4 (2003): 313–23. http://dx.doi.org/10.1016/s0263-2241(03)00002-2.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

48

Zaucha, Michael T., Julia Raykin, William Wan, et al. "A Novel Cylindrical Biaxial Computer-Controlled Bioreactor and Biomechanical Testing Device for Vascular Tissue Engineering." Tissue Engineering Part A 15, no. 11 (2009): 3331–40. http://dx.doi.org/10.1089/ten.tea.2008.0369.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

49

Senatorski, Jan, Paweł Mączyński, and Jan Tacikowski. "A comparison of some properties of the computer controlled nitriding process versus carburizing." Inżynieria Powierzchni 26, no. 1 (2021): 23–33. http://dx.doi.org/10.5604/01.3001.0014.8775.

Der volle Inhalt der Quelle

Annotation:

A comparison is presented of the nitriding and carburizing processes. Traditional gas nitriding, despite its several advantages over carburizing, has still not achieved its due popularity. The key factor is inadequate process control. An industrial-scale computerized system, employing the nitriding potential as the fundamental controlling parameter, can produce repeatable, superior nitriding results, limiting layer brittleness and enhancing usable properties. Results obtained showed that nitriding layers match carburized layers in fatigue, while exceeding them in both impact strength and wear

APA, Harvard, Vancouver, ISO und andere Zitierweisen

50

Kleinke, Darrell K., and H. Mehmet Uras. "An Overview of a Capstone Design Course and a Project." International Journal of Mechanical Engineering Education 22, no. 3 (1994): 229–34. http://dx.doi.org/10.1177/030641909402200308.

Der volle Inhalt der Quelle

Annotation:

An overview of the organization of a one-semester capstone design course is presented along with the description of a design project: ‘Sensor positioning device’. The students work as teams on a given project, starting from concept development to constructing and testing an actual working prototype. The sensor positioning device has electromechanical components and is computer-controlled. It is a multidisciplinary project with computer integration and software development.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!