Zeitschriftenartikel: „Knitting technology“

1

ITOH, SATORU. „Technology for Knitting“. Sen'i Gakkaishi 48, Nr. 3 (1992): P120—P125. http://dx.doi.org/10.2115/fiber.48.3_p120.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

2

TANIGUCHI, Masayoshi, und Hiroyuki MATSUDA. „Garment Length Technology of Warp Knitting“. Sen'i Kikai Gakkaishi (Journal of the Textile Machinery Society of Japan) 52, Nr. 11 (1999): P449—P454. http://dx.doi.org/10.4188/transjtmsj.52.11_p449.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

3

MATSUURA, Toru. „Garment Length Technology of Weft Knitting“. Sen'i Kikai Gakkaishi (Journal of the Textile Machinery Society of Japan) 52, Nr. 11 (1999): P455—P458. http://dx.doi.org/10.4188/transjtmsj.52.11_p455.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

4

HASHI, Hiroshi. „Garment Length Technology of Circular Knitting“. Sen'i Kikai Gakkaishi (Journal of the Textile Machinery Society of Japan) 52, Nr. 11 (1999): P459—P464. http://dx.doi.org/10.4188/transjtmsj.52.11_p459.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

5

Truevtsev, A. V. „The actual problems of knitting technology“. Izvestiya vysshikh uchebnykh zavedenii. Tekhnologiya legkoi promyshlennosti 47, Nr. 1 (2020): 111–12. http://dx.doi.org/10.46418/0021-3489_2020_47_1_20.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

6

Hashi, H. „Special issue : electronic control technology in knitting machines.Progress of electronic control technology in socks knitting machine.“ Sen'i Kikai Gakkaishi (Journal of the Textile Machinery Society of Japan) 44, Nr. 4 (1991): P182—P186. http://dx.doi.org/10.4188/transjtmsj.44.4_p182.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

7

Han, Qiang, und Pei Wei Hou. „The Pattern Management Mathematical Method of Computer Flat Knitting Machines Based on Embedded Processor“. Applied Mechanics and Materials 43 (Dezember 2010): 156–59. http://dx.doi.org/10.4028/www.scientific.net/amm.43.156.

Der volle Inhalt der Quelle

Annotation:

Computer flat knitting machine (CFKM) is a kind of high-technology knitting equipment, which integrates computer science, mechatronics technology and knitting technics. The paper anatomized the structure of data information of the CFKM, carefully discussed the pattern management mathematical method of the data processing and then put forward the implementation of pattern management mathematical method in embedded processor.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

8

Sato, S. „Special issue : electronic control technology in knitting machines.Progress and prospect of electronic control technology in knitting machines.“ Sen'i Kikai Gakkaishi (Journal of the Textile Machinery Society of Japan) 44, Nr. 4 (1991): P168—P174. http://dx.doi.org/10.4188/transjtmsj.44.4_p168.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

9

Xia, Xiu Li. „Development of Knitting Protective Sleeve“. Applied Mechanics and Materials 184-185 (Juni 2012): 1389–93. http://dx.doi.org/10.4028/www.scientific.net/amm.184-185.1389.

Der volle Inhalt der Quelle

Annotation:

Knitted protective sleeve mainly deals with the functional development . Using molding technology of knitted fabrics and special coating technology, implemented a full-shaped cuff of production technology and specific coating technology. The results show that the shaped cuff reduces the disadvantages caused by sewing, high fabric elasticity; special coating and coating techniques, reducing the load, at the same time so that the fabric is beautiful, has better properties of waterproof and moisture permeability, improves the wearing comfort.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

10

Shang, Li Ming, Jia Guang Meng und Cai Ling Ren. „Design and Knitting Technology of Maifan Stone Fiber Knitted Fabrics“. Advanced Materials Research 503-504 (April 2012): 223–27. http://dx.doi.org/10.4028/www.scientific.net/amr.503-504.223.

Der volle Inhalt der Quelle

Annotation:

This article mainly describes the development and design of maifan stone fiber blended yarn knitted fabrics for the six textures, focus on the key points of knitting and knitting process, studies on basic structural features of knitted fabrics, and testes on the basic properties of fabrics. It is showed from the testing result that pure maifan stone fiber is suitable for developing knitted fabrics

APA, Harvard, Vancouver, ISO und andere Zitierweisen

11

NAKASHIMA, Toshio. „CAD/CAM technology in the knitting industry.“ Journal of the Japan Society for Precision Engineering 55, Nr. 10 (1989): 1755–58. http://dx.doi.org/10.2493/jjspe.55.1755.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

12

Blaga, M., und M. Draghici. „Application of genetic algorithms in knitting technology“. Journal of the Textile Institute 96, Nr. 3 (Juni 2005): 175–78. http://dx.doi.org/10.1533/joti.2004.0064.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

13

Simonis, K., Y.-S. Gloy und T. Gries. „INDUSTRIE 4.0 - Automation in weft knitting technology“. IOP Conference Series: Materials Science and Engineering 141 (Juli 2016): 012014. http://dx.doi.org/10.1088/1757-899x/141/1/012014.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

14

Peng, Jiajia, Gaoming Jiang, Honglian Cong, Xuan Luo und Yan Zhao. „Development of whole garment formed on four-bed computerized flat knitting machine“. International Journal of Clothing Science and Technology 30, Nr. 3 (04.06.2018): 320–31. http://dx.doi.org/10.1108/ijcst-07-2017-0105.

Der volle Inhalt der Quelle

Annotation:

Purpose The whole garment technology offers a solution for the production efficiency by directly knitting a seamless tubular garment. Due to its complexity, high requirements and few references, the technology has not been widely applied in mass production. Therefore, the purpose of this paper is to show garment technology’s detailed design method, the technique calculation process and its merits compared than common technology. Design/methodology/approach This paper first analyzes the knitting principle of the four-bed computerized flat knitting machine from its configuration. After that, the design method is putted forward as well as the technique calculation process. To reveal the advantages of the whole garment technology, this paper builds a comprehensive evaluation system by comparing the knitting time, labor cost and the yarn consumption. Findings With the evaluation system, the whole garment technology is proved to be more productive, cost-saving and less materials-consuming. Moreover, this advantage stands more out when the machine gage is higher. Research limitations/implications Due to limited research time and references, this paper only presents the whole garment technology for knitting common and traditional styles. More complicated and fashioned garments can be studied in the future research. Practical implications The design method and technology presented in this paper can be used as a reference for both the designers in the manufacture industry and the scholars for academic research works. Originality/value This paper has presented the whole garment technology and a specific method for technique calculation with consideration of garment structures. It also builds a evaluation system to show the advantages in terms of knitting efficiency, labor cost and yarn consumption.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

15

Prążyńska, Aleksandra, und Zbigniew Mikołajczyk. „Identification of the Process of Dynamic Stretching of Threads in Warp-Knitting Technology“. Autex Research Journal 17, Nr. 4 (20.12.2017): 334–43. http://dx.doi.org/10.1515/aut-2016-0039.

Der volle Inhalt der Quelle

Annotation:

Abstract The publication presents a theoretical study of the susceptibility of rheological models of threads to dynamic stretching in the context of modern, highly efficient textile technologies. Input parameters of the four analyzed models, the Kelvin-Voigt model, the Maxwell model, Standard model 2, and the Zener model, corresponded to the actual values of the coefficients of viscosity, elasticity, kinematic and dynamic loading, and stretching speed for the analyzed polyester silk threads produced in a knitting process, with knitting speeds from 700 to 1,600 courses/min. The research proves that the tested thread models behave differently in the stretching process-the Kelvin-Voigt model is sensitive to both the increases in kinematic loading and viscosity coefficient, Standard model 2 is only susceptible to dynamic stiffness, and the Zener model is significantly sensitive to kinematic loading. All responses of the models increase with the increase in stretching speeds. The obtained results indicate substantial “accuracy tolerance” in setting input parameters while identifying dynamics of the knitting process on warp-knitting machines.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

16

Sawazaki, M. „Special issue : electronic control technology for knitting machines.Circular knitting machine by new knitting method and electronic patterning machine for sampling.“ Sen'i Kikai Gakkaishi (Journal of the Textile Machinery Society of Japan) 44, Nr. 4 (1991): P175—P181. http://dx.doi.org/10.4188/transjtmsj.44.4_p175.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

17

Matković, Vesna Marija Potočić. „The Power of Fashion: The Influence of Knitting Design on the Development of Knitting Technology“. TEXTILE 8, Nr. 2 (Juli 2010): 122–46. http://dx.doi.org/10.2752/175183510x12791896965493.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

18

Huang, Ji Ye, und Ming Yu Gao. „Flat Knitting Machine Design Based on Display Accelerator“. Applied Mechanics and Materials 340 (Juli 2013): 8–12. http://dx.doi.org/10.4028/www.scientific.net/amm.340.8.

Der volle Inhalt der Quelle

Annotation:

In this paper, the application of a FPGA-based large-screen and high-resolution display accelerator technology in full-automatic textile machinery (computerized flat knitting machine) is studied. The design of traditional computerized knitting machine system is difficult to support the display of large screen and high resolution operating interface. Therefore, a displaying accelerator is designed in this paper. It comprises of FPGA, configuration chip, SDRAM and LVDS transmitter chip, is located between the embedded main processor and high resolution TFT LCD screen of computerized flat knitting machine, and implements the modules such as display acceleration logic and SDRAM controller relying on Verilog HDL programming in FPGA. The computerized flat knitting machine, applying displaying acceleration technology, can present its dynamic color interface on an 800 x 600 resolution TFT LCD (10.4") on the condition that real time, reliability and cost can be ensured.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

19

Huang, Ji Ye, Ming Yu Gao und Heng Cai. „Application of FPGA-Based Large-Screen and High-Resolution Display Accelerator in Computerized Flat Knitting Machine“. Applied Mechanics and Materials 192 (Juli 2012): 318–22. http://dx.doi.org/10.4028/www.scientific.net/amm.192.318.

Der volle Inhalt der Quelle

Annotation:

In this paper, the application of a FPGA-based large-screen and high-resolution display accelerator technology in full-automatic textile machinery (computerized flat knitting machine) is studied. The design of traditional computerized knitting machine system is difficult to support the display of large screen and high resolution operating interface. Therefore, a displaying accelerator is designed in this paper. It comprises of FPGA, configuration chip, SDRAM and LVDS transmitter chip, is located between the embedded main processor and high resolution TFT LCD screen of computerized flat knitting machine, and implements the modules such as display acceleration logic and SDRAM controller relying on Verilog HDL programming in FPGA. The computerized flat knitting machine, applying displaying acceleration technology, can present its dynamic color interface on an 800 x 600 resolution TFT LCD (10.4") on the condition that real time, reliability and cost can be ensured.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

20

TANIGUCHI, Masayoshi. „Knit. Advanced technology in recent warp-knitting machine.“ Sen'i Kikai Gakkaishi (Journal of the Textile Machinery Society of Japan) 51, Nr. 7 (1998): P378—P386. http://dx.doi.org/10.4188/transjtmsj.51.7_p378.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

21

Radvan, Caterina. „Inclusively Designed Womenswear through Industrial Seamless Knitting Technology“. Fashion Practice 5, Nr. 1 (Mai 2013): 33–58. http://dx.doi.org/10.2752/175693813x13559997788727.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

22

Hong Hu, Zhengyue Wang und Su Liu. „Development of auxetic fabrics using flat knitting technology“. Textile Research Journal 81, Nr. 14 (11.05.2011): 1493–502. http://dx.doi.org/10.1177/0040517511404594.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

23

Hu, Guo Jun, Fang Feng und Wei Qiang Zhao. „Design of Control Circuit for Needle-Selected Mechanism of Knitting Machines“. Advanced Materials Research 328-330 (September 2011): 2257–60. http://dx.doi.org/10.4028/www.scientific.net/amr.328-330.2257.

Der volle Inhalt der Quelle

Annotation:

The needle-selected technology is one of the key one for the control system of knitting machine. Based on the analysis of the structure and principle for the needle-selected mechanism, the drive circuits of the needle-selected device are designed to ensure the stability when knitting machines run. Additionally, this paper presents the discussion of the software design for needle -selected technology, which provides a theoretical reference for the research and development of the control system.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

24

Jin, Zi Min, Dan Zhou, Yu Xiu Yan und Jian Wei Tao. „The Study of Technology and DSC Temperature Adjusting Performance on Outlast Viscose Seamless Knitted Fabric“. Advanced Materials Research 821-822 (September 2013): 219–22. http://dx.doi.org/10.4028/www.scientific.net/amr.821-822.219.

Der volle Inhalt der Quelle

Annotation:

Combined with seamless knitting technology, the temperature adjusting performance of Outlast viscose seamless knitted fabric is researched. Accepting differential scanning calorimetry (DSC), the temperature adjusting performance tests of samples determined by the seamless knitting process design are done. Comparative analysis of endothermic and exothermic temperature ranges, peak temperatures, influence of interwoven ratios and weave structures on fabric ability of heat absorption, accumulation and release is studied. DSC results show that Outlast viscose seamless knitted fabrics have good temperature adjusting performance, provide a certain value on improving the wearing comfort of seamless knitted fabric.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

25

Xia, Xiu Li. „Development of Knitted Protective Socks“. Advanced Materials Research 821-822 (September 2013): 265–69. http://dx.doi.org/10.4028/www.scientific.net/amr.821-822.265.

Der volle Inhalt der Quelle

Annotation:

Focused on the waterproof and breathable dual function for knitting protection socks, The methods and means have been developed for the socks special purposes application in the sock fabric knitting, forming socks and the use of a special coating technology etc. It have been guaranteed every performance of protecting socks to achieves the instructions for use.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

26

Wang, Wei Zhen, Xiao Nong Qian, Ya Zhen Wang und Dan Li. „Garment Production Process Optimization Based on the Splicing of Knitting and Tatting Fabrics“. Advanced Materials Research 680 (April 2013): 577–81. http://dx.doi.org/10.4028/www.scientific.net/amr.680.577.

Der volle Inhalt der Quelle

Annotation:

Based on the splicing of knitting and tatting fabrics and the optimization of process realization route, the author tries to improve the drawbacks in traditional splicing of knitting and tatting fabrics in terms of process technology and thus extend their respective advantageous properties. Through the analysis of fabric properties difference, integration of structural characteristics of parts, optimization of sewing process and post-production process reengineering, the author proposes the prerequisites and principles related to the splicing of two fabrics, and discusses the common problems in the splicing of knitting and tatting fabrics and specific process optimization route.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

27

Zhang, Xiaohui, und Pibo Ma. „Application of Knitting Structure Textiles in Medical Areas“. Autex Research Journal 18, Nr. 2 (01.06.2018): 181–91. http://dx.doi.org/10.1515/aut-2017-0019.

Der volle Inhalt der Quelle

Annotation:

Abstract There are many kinds of medical textiles, such as woven textiles, non-woven textiles, braided textiles and knitted textiles. Non-woven medical textiles constitute more than 60% of the total medical textiles used, but are almost disposable ordinary medical textiles. While knitted fabrics forms a small part of the medical textiles, but are greatly applied in high-tech medical textiles, containing artificial blood vessels, hernia patches, cardiac support devices, knitted medical expandable metallic stents and tendon scaffolds. Knitting structures, including weft knitting structure and warp knitting structure. The knitted textiles are popular for their loose structure, greater flexibility, higher porosity, more flexible structure and better forming technology. The present article will introduce some knitting structures and materials applied in the medical textiles in accordance with non-implantable, implantable, extra-corporeal textiles and healthcare and hygiene products.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

28

Lu, Zhiwen, Gaoming Jiang, Honglian Cong und Xi Yang. „The Development of the Flat-Knitted Shaped Uppers based on Ergonomics“. Autex Research Journal 16, Nr. 2 (01.06.2016): 67–74. http://dx.doi.org/10.1515/aut-2015-0029.

Der volle Inhalt der Quelle

Annotation:

Abstract To achieve the efficiency and specification of the flat-knitted uppers design, the basic patterns of uppers are made from shoe lasts based on the research on the characteristics of human’s feet and wearability requirements on uppers. The knitting technology for half-shaped and fully shaped uppers was formed after the shear deformation of basic pattern and combination with flat knitting technology. As regards to the functional requirements on key parts of uppers, the structures of flat-knitted shaped uppers were intensively analysed and studied, dividing them into two categories (functional structure and decorative structure), discussing the knitting methods and advantages of different structure, and finally experimentally proving that the planar pattern of flat knitted uppers can apply to the design of flat-knitted uppers and achieve the combination of functionality and artistry of sneakers after combining with structural changes, with a great significance on the achievement of the efficient production of uppers and the enhancement of its commercial value.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

29

Liu, Rong, Shuxiao Wang und Terence T. Lao. „A Novel Solution of Monitoring Incontinence Status by Conductive Yarn and Advanced Seamless Knitting Techniques“. Journal of Engineered Fibers and Fabrics 7, Nr. 4 (Dezember 2012): 155892501200700. http://dx.doi.org/10.1177/155892501200700415.

Der volle Inhalt der Quelle

Annotation:

This paper presents a novel solution for monitoring incontinence status through the design and development of the intelligent incontinence pants by the use of conductive yarns and incorporating advanced circular seamless knitting technology. The produced textile incorporates wire and electrodes by conductive yarn working with a siren system which can monitor, sense and alert the wearer and care provider on the incontinence status in real time so as to reduce the need for manual checking and minimize patient care workload. The engineered stitches, yarn materials, and unique seamless knitting techniques provide soft handling, special fabric mechanisms, and tactile comfort of the resulting product. The electrical resistance of knitted conductive yarn demonstrated a stable performance in wet processing. Fitting body trials were conducted to estimate product dimension and configuration. This study allows us to explore further the potential applications of conductive yarn and seamless knitting technology in bio-functional and intelligent healthcare products and solutions through integrating multidisciplinary knowledge and techniques.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

30

Melnyk, Liudmyla, Olena Kyzymchuk und Liudmyla Zubkova. „Ukrainian Folk Ornaments in Modern Knitting“. TEKSTILEC 64, Nr. 2 (27.03.2021): 84–95. http://dx.doi.org/10.14502/tekstilec2021.64.84-95.

Der volle Inhalt der Quelle

Annotation:

National arts and crafts are not only the skills of an individual nation but an ethnic phenomenon that has unique features and serves as a source of information on national history and culture. Decorative and applied art in Ukraine combines the traditions and techniques of manufacturing and decoration, which have been developed and passed down from generation to generation. It has a clear national identity and numerous regional differ¬ences in ornamental motifs, compositions and favourite colours. Therefore, the Ukrainian folk art has a significant potential and is a source of ideas in creating modern clothing as well as interior items. Embroidery as a way of creating ornamental motifs on a textile material using various techniques is a common process for decorating clothes and interiors for the Ukrainians. Today, ornamental compositions of embroidered folk textiles could be transmitted into modern clothes using various technologies. However, the use of a knitting machine allows creating a pattern during the item production. The ornament transformation into a pattern for knitting can be carried out with graphic software by creating a grid with a cell size similar to the loop size of a knitted structure for corresponding interlooping. A number of clothing and interior items with ethnic motifs was created using the capabilities of flat knitting machines within the masters programme “Knitting Technology and Design” at the Textile Technology and Design Department of the Kyiv National University of Technologies and Design.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

31

Ho, Huong Thi Minh, und Nguyen Dai Tran. „The development of Database and Searching Strategy for Knitting Technology“. Science and Technology Development Journal 16, Nr. 4 (31.12.2013): 79–84. http://dx.doi.org/10.32508/stdj.v16i4.1587.

Der volle Inhalt der Quelle

Annotation:

Since Information Technology and Internet have been growing at an unprecedented rate; they become powerful tools that assist academic works more efficiently. Researching, teaching and learning information can be done easily with a vast library of knowledge provided by Internet. Nevertheless, information is a broad and implicit term, which can be referred to different types of knowledge that relate to each other. In order to access a specific topic effectively, the particular strategy of searching and managing information is required. Therefore, this research focuses on the construction of database for Knitting Technology and introduces new information software to facilitate the searching process.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

32

Price, Laura. „Knitting and the City“. Geography Compass 9, Nr. 2 (Februar 2015): 81–95. http://dx.doi.org/10.1111/gec3.12181.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

33

Elmoughni, Hend M., Ayse Feyza Yilmaz, Kadir Ozlem, Fidan Khalilbayli, Leonardo Cappello, Asli Tuncay Atalay, Gökhan Ince und Ozgur Atalay. „Machine-Knitted Seamless Pneumatic Actuators for Soft Robotics: Design, Fabrication, and Characterization“. Actuators 10, Nr. 5 (30.04.2021): 94. http://dx.doi.org/10.3390/act10050094.

Der volle Inhalt der Quelle

Annotation:

Computerized machine knitting offers an attractive fabrication technology for incorporating wearable assistive devices into garments. In this work, we utilized, for the first time, whole-garment knitting techniques to manufacture a seamless fully knitted pneumatic bending actuator, which represents an advancement to existing cut-and-sew manufacturing techniques. Various machine knitting parameters were investigated to create anisotropic actuator structures, which exhibited a range of bending and extension motions when pressurized with air. The functionality of the actuator was demonstrated through integration into an assistive glove for hand grip action. The achieved curvature range when pressurizing the actuators up to 150 kPa was sufficient to grasp objects down to 3 cm in diameter and up to 125 g in weight. This manufacturing technique is rapid and scalable, paving the way for mass-production of customizable soft robotics wearables.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

34

Єліна, T. В., Т. А. Дзикович, Л. Є. Галавська und Т. М. Дмитренко. „РОЗРОБКА ЖІНОЧИХ ПАНЧІХ З ЖАКАРДОВИМ ВІЗЕРУНКОМ“. Fashion Industry, Nr. 4 (23.02.2021): 26–31. http://dx.doi.org/10.30857/2706-5898.2020.4.1.

Der volle Inhalt der Quelle

Annotation:

Development of a model of warm and stylish women's stockings with a jacquard pattern, suitable for mass production. Methodology. To achieve this goal, a review of patent and technical іnformation on the manufacture of hosiery with jacquard patterns was realized. Autodesk AutoCAD software is used to increase the effi ciency of product design. Findings. The study developed a collection of women's stockings with animal ornaments and patterns for making the same. A pattern simulating the color of a zebra's fur was chosen for experimental production.A two-color double bed jacquard stockings collection is designed. The production of this knit does not involve the knitting density changes. Correspondence of the stocking surface geometry to the measurements of a person’s leg can be provided by increasing or decreasing working needles. The latter cannot be realized on specialized circular knitting equipment for hosiery production. The models of the collection can be made on fl at knitting machines accord ing to the patterns. An experimental model is made of half-woolen yarn on a semi-industrial fl at knitting machine Brother KH-965i. The linker Hague D280E has been used for the stocking’s parts sewing. A parametric pattern of the unfolded product in Autodesk AutoCAD has been created. To adjust the pattern to the desired size, a customer has to enter the measurements and the boundary will be redrawn automatically. An application in the Autolisp programming language has been developed to automatically calculate the knitting program (increase and decrease the number of working needles). Entering course and wale spacing values of the sample structure in the program allows the automatically calculating the required number of working needles in each part of the product.Practical value. The technology of making women’s hosiery with design patterns on the basis of double jacquard knits on fl at-bed knitting machines has been develope d. Such products can be made both on modern fl at knitting machines with computer control, such as, for example, automated equipment of the Stoll or Shima Seiki brands and on semi-industrial knitting machines, such as Brother, Selver Red and others.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

35

Nesterova, Ludmila L. „Possibility of receiving plaster knitting from a сitrogyps“. Yugra State University Bulletin 12, Nr. 2 (15.06.2016): 29–33. http://dx.doi.org/10.17816/byusu201612229-33.

Der volle Inhalt der Quelle

Annotation:

It was chosen the best technology acquisition mode in an autoclave gypsum binder from the waste of food industry - cytrogyps, given its characteristics. Also indicated mineral composition of the resulting calcium sulphate and morphological features of its crystals.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

36

NAKAI, ASAMI, AKIO OHTANI und MASAYUKI KITAMURA. „Textile Fabric for Reinforcements of Composite Materials (1) Warp Knitting Technology“. Sen'i Gakkaishi 68, Nr. 10 (2012): P—286—P—290. http://dx.doi.org/10.2115/fiber.68.p-286.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

37

Tan, Joseph K. H., und John Hanna. „Integrating health care with information technology: Knitting patient information through networking“. Health Care Management Review 19, Nr. 2 (1994): 72–80. http://dx.doi.org/10.1097/00004010-199401920-00008.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

38

Zhang, Li, Ting You Wang und Hong Bin Liu. „Design for New Type Tobacco Sewing Machine Head“. Applied Mechanics and Materials 687-691 (November 2014): 300–303. http://dx.doi.org/10.4028/www.scientific.net/amm.687-691.300.

Der volle Inhalt der Quelle

Annotation:

In order to reducing the worker's labor intensity in tobacco sewing, a new machine adoption with single thread sewing technology was developed. Through analyzing the existing problems in sewing machine and the tobacco damage situation, using drawing method, analytic method and other methods, the shape of the sewing component, hook line components and other mating parts were designed. The results show that the machine has the advantages of simple structure, controllable sewing speed, adjustable leaf thickness and quantity. And the tobacco leaf damage rate is low. The comprehensive efficiency in tobacco leaf knitting with this machine is four times higher than that with hand knitting. Its application prospect is considerable.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

39

Widodo, Sarono, Muhammad Anif, Endro Wasito, Eni Dwi Wardihani, Eddy Triyono, Sri Anggraeni, Taufiq Yulianto und Muhlasah Novitasari. „Pendampingan Pemasaran Digital Untuk Kerajinan Rajut Kepada Ibu-ibu PKK RW V Kelurahan Jomblang Kecamatan Candisari Kota Semarang“. JATI EMAS (Jurnal Aplikasi Teknik dan Pengabdian Masyarakat) 3, Nr. 2 (24.10.2019): 176. http://dx.doi.org/10.36339/je.v3i2.240.

Der volle Inhalt der Quelle

Annotation:

Jomblang Village is one of the villages in Candisari sub-district, Semarang city. Jomblang Village has an area of ± 108 Ha and has a population of 17,322 people, has 15 RWs and 120 RTs. Activities that have been developed in Kelurahan Jomblang include catfish fattening, packaging screen printing, waste processing and catering including tempe craftsmen, tofu into chips. The activity carried out is an initiative of the local community, which is carried out with affordable capital and can be done by residents on the sidelines of free time which can be used as a side job. In this service, PKK mothers in RW V, Jomblang sub-district, Candisari subdistrict, Semarang has conducted training in the form of knitting skills and making simple knitting bags, followed by mentoring on how to market their products digitally (via the internet). The completion of community service is expected to make it easier for mothers to sell their knitting products and increase their product sales to the community through IoT technology so that it can improve the family economy.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

40

NAKASHIMA, Akichika, Yusuke HIGUCHI, Lina WAKAKO und Toshiyasu KINARI. „Development and Applications of a Smart Textile Actuator by Flat Knitting Technology“. Journal of Textile Engineering 64, Nr. 5 (15.10.2018): 133–39. http://dx.doi.org/10.4188/jte.64.133.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

41

Qin, Zhi Gang, und Bao Shi. „Investigation on Tensile Properties of Two Guide Bar Warp Knitted Fabric Reinforced Composites“. Advanced Materials Research 602-604 (Dezember 2012): 76–79. http://dx.doi.org/10.4028/www.scientific.net/amr.602-604.76.

Der volle Inhalt der Quelle

Annotation:

The composite laminates are produced by manual molding technology using two guide bar warp knitted fabrics of glass fiber as reinforcement and epoxy resin as matrix. The tensile properties of composites in the course, wale and diagonal directions are tested on the universal material testing machine. The influences of warp knitting stitch structures for mechanical performance of the composites are discussed. The results show that the tensile stress/strain curves of two guide bar warp knitted fabric reinforced composites were nonlinear. The tensile properties of composites possess obvious anisotropic characteristics. The tensile strengths and modulus of the warp knitting fabric composites depend on the yarn numbers bearing load along tensile direction, which are related to the stitches and structural parameters of warp knitted fabrics.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

42

Qin, Zhi Gang, und Xiao Hong Ma. „Investigation on Tensile Properties of Weft Insertion Warp Knitted Fabric Reinforced Composites“. Advanced Materials Research 821-822 (September 2013): 1200–1203. http://dx.doi.org/10.4028/www.scientific.net/amr.821-822.1200.

Der volle Inhalt der Quelle

Annotation:

Warp knitted fabrics possess a number of changes in the structures, so they do have great advantages on the property design of composites. The three kinds of weft insertion warp knitted fabrics are knitted on a Raschel latch needle warp knitting machine with glass continuous-filament yarns. The warp knitted fabric/ unsaturated polyester resin composite laminates are produced by manual molding technology. The tensile properties of composites in the course, wale and diagonal directions are tested on the universal material testing machine. The results show that the tensile stress/strain curves of the composites were nonlinear. The tensile properties of the composites possess obvious anisotropic characteristics. The tensile strengths and elastic modulus of the warp knitting composites depend on the needle space number of inlaid yarn, fabric density and structure.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

43

NAKAI, ASAMI. „Textile Fabric for Reinforcements of Composite Materials^|^ensp;(2)^|^ensp;Weft Knitting Technology“. Sen'i Gakkaishi 69, Nr. 3 (2013): P_77—P_80. http://dx.doi.org/10.2115/fiber.69.p_77.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

44

Choy, P. K., J. Atkinson und T. Dias. „A New Technique for Feeding Yarn in a Flat Bed Knitting Machine“. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 209, Nr. 2 (August 1995): 151–54. http://dx.doi.org/10.1243/pime_proc_1995_209_242_02.

Der volle Inhalt der Quelle

Annotation:

The quality of knitted fabric panels is of considerable importance to the knitwear industries. The latest development in flat bed knitting technology improves the efficiency of the production by knitting fully fashioned fabric panels that are to exact shape and size. This greatly reduces the cutting waste and length of time for the making-up process, but garment manufacturers are still facing the difficulty of retaining dimensional stability of the knitted panels. One of the significant factors influencing this undesired property is input yarn tension variation. The analysis of this problem is described and a new method of yarn feeding is also suggested. This method utilizes storage yarn feed to eliminate the undesired effect of yarn feed speed variation and has been applied as a prototype. The results show a promising and satisfactory improvement in the fabric quality.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

45

Saitaer, Xiakeer. „Study on Technical Base of Uyghur Hotan Carpet“. Advanced Materials Research 1048 (Oktober 2014): 298–302. http://dx.doi.org/10.4028/www.scientific.net/amr.1048.298.

Der volle Inhalt der Quelle

Annotation:

Uyghur carpet is the traditional Uyghur handicraft, it is the fusion of spinning, dyeing, knitting and painting with both practical and artistic value. Its origination dates back to more than 2000 years ago and it has been evolving gradually ever since along with the economic development. Hotan carpet is the most representative one of Xinjiang carpet, and it represents the highest achievement. [1] This paper is focus on the textile technology, dyeing technology and ornament of Uyghur Hotan carpet.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

46

Chen, Wei Lai, Miao Miao He, Mao Yi Zhang und Zhan Chang Tang. „Wearing Performances of Floret Silk/Cotton Blended Sports Socks“. Advanced Materials Research 532-533 (Juni 2012): 101–4. http://dx.doi.org/10.4028/www.scientific.net/amr.532-533.101.

Der volle Inhalt der Quelle

Annotation:

By using floret silk/cotton blended yarn, high-tech knitting technology and strict technical procedure, we designed and produced knitted sports socks. We had a series of test of socks' wearing capabilities, including tensile, burst, wear-resistant, air breathable, moisture permeable, anti-pilling property. Testing results showed that floret silk/cotton sports socks were comfortable and durable enough to wear.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

47

Van Belle, Guy c. Jules. „There is a German way of knitting: some reflections on technology, education and design“. Journal of Information Technology for Teacher Education 8, Nr. 2 (Juli 1999): 251–64. http://dx.doi.org/10.1080/14759399900200064.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

48

Kadnikova, Olga, Gulnara Altynbayeva, Arman Aidarkhanov, Bagit Shaldikova und Botagoz Nurmuchambetova. „Potential analysis of implementation of developed technology for processing of sewing and knitting fabrics“. Energy Procedia 128 (September 2017): 411–17. http://dx.doi.org/10.1016/j.egypro.2017.09.047.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

49

Zhang, Xinyue, Rongjia Zhang, Minen Cao und Tingxuan Yang. „Analysis on the Development Feasibility of a High Quality Antibacterial Medical Material“. Insight - Material Science 3, Nr. 1 (20.03.2020): 16. http://dx.doi.org/10.18282/ims.v3i1.322.

Der volle Inhalt der Quelle

Annotation:

<p>The wet process antibacterial yarn and wet process. Knitted fabric of flax are made by using wet spinning technology and knitting manufacturing technology of flax, test the main properties of yarn and fabric, the research progress of the application of flax products in medical textiles was reviewed. This paper mainly analyzes the feasibility of flax wet process, antibacterial yarn and flax wet process and knitted fabric as flax wet process antibacterial medical materials from two aspects of strength and knitted structure.</p>

APA, Harvard, Vancouver, ISO und andere Zitierweisen

50

Sha, Sha, Anqi Geng, Yuqin Gao, Bin Li, Xuewei Jiang, Hui Tao, Lei Luo et al. „Review on the 3-D simulation for weft knitted fabric“. Journal of Engineered Fibers and Fabrics 16 (Januar 2021): 155892502110125. http://dx.doi.org/10.1177/15589250211012527.

Der volle Inhalt der Quelle

Annotation:

There are different kinds of geometrical models and physical models used to simulate weft knitted fabrics nowadays, such as loop models based on Pierce, piecewise function, spline curve, mass-spring model, and finite element analyses (FEA). Weft knitting simulation technology, including modeling and yarn reality, has been widely adopted in fabric structure designing for the manufacturer. The technology has great potentials in both industries and dynamic virtual display. The present article is aimed to review the current development of 3-D simulation technique for weft knitted fabrics.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Zeitschriftenartikel zum Thema „Knitting technology“

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an