Thematische Bibliographien / Návrh čerpadla / Dissertationen
Um die anderen Arten von Veröffentlichungen zu diesem Thema anzuzeigen, folgen Sie diesem Link: Návrh čerpadla.

Dissertationen zum Thema „Návrh čerpadla“

Autor: Grafiati
Veröffentlicht am 28. Juni 2021
Zuletzt aktualisiert am 29. Juli 2025

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit Top-50 Dissertationen für die Forschung zum Thema "Návrh čerpadla" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Sehen Sie die Dissertationen für verschiedene Spezialgebieten durch und erstellen Sie Ihre Bibliographie auf korrekte Weise.

1

Hyriak, Maroš. "Návrh šroubového čerpadla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232012.

Der volle Inhalt der Quelle
Annotation:
This thesis is concerned with the topic of Pumps with crew centrifugal impeller. Thanks to the benefits such as free passage and efficiency there are many practical applications of these products. Despite this fact there is only few manufacturers dealing with them what results in lack of research and available information in the area. In order to fill the gap, this thesis aims to propose hydraulic of screw centrifugal impeller to the specified parameters. The impeller with a single moving blade will be designed for pumping heavily polluted water and hardly pumpable liquids. Blade will be balan
APA, Harvard, Vancouver, ISO und andere Zitierweisen
2

Konečná, Kateřina. "Návrh pracovního bodu odstředivého čerpadla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228305.

Der volle Inhalt der Quelle
Annotation:
Target of diploma thesis The Operating Point of the Centrifugal Pump was create program for analyze system of pumps, it would be an effective instrument at projection these systems. Program is divided into two parts: system characteristic and performance characteristic. Subject of this thesis is create pumps database, enter performance characteristics and succeeding working with them. Program enable regulation pump with change speed and cooperation two pumps, work in parallel or series. The result of program is project system of pumps on enter parameters with more economy work.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
3

Jašek, František. "Návrh tepelného čerpadla voda-voda." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230413.

Der volle Inhalt der Quelle
Annotation:
First part of my diploma thesis contains theoretical description of compressor based heat pumps, refrigeration cycle, main components of refrigeration cycle and auxiliary equipment. Second part contains the heat pump WATER-WATER desing. It will be used for heat recovery from cogeneration units in heating plants.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
4

Maléř, Pavel. "Návrh pracovního bodu odstředivého čerpadla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228299.

Der volle Inhalt der Quelle
Annotation:
The diploma thesis has a target to create a computer program that will serve as help for an evaluation of the system of pumps (The Operating Point of the Centrifugal Pump). The computer program is intended above all designers, but it will find its using in the sphere of education. The main computer program has two partial programs: System characteristic and Performance characteristic. The main point of this diploma thesis is create partial computer program: system characteristic. Other target is creating the main program and finding The Operating Point of the Centrifugal Pump. Other parameters
APA, Harvard, Vancouver, ISO und andere Zitierweisen
5

Stareček, Jakub. "Návrh axiálního čerpadla pro zadané parametry." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-232102.

Der volle Inhalt der Quelle
Annotation:
This master's thesis contains basic hydraulic calculations, design and optimalization of both the rotor and stator part of the axial pump. There is also included an analysis of the principle and function of hydrodynamic axial pumps. The last part of this work is focusing on the strength calculations and flow simulations using CFD.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
6

Sloupenský, Zdeněk. "Návrh odstředivého čerpadla metodami diferenciální geometrie." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-233958.

Der volle Inhalt der Quelle
Annotation:
This thesis deals with a new approach to the design of impeller, blade and spiral of centrifugal pump. The mathematic model of flow inside meridional section of impeller and spiral is based on the instruments of differential geometry applied to Bezier surfaces. This formerly introduced theory is more deeply developed in this thesis and the conclusions are applied to the design of centrifugal pump parts working with fluid. The main thesis output is the mathematic model and on its principles created software determined for the design of impeller, blade and spiral. The received results are export
APA, Harvard, Vancouver, ISO und andere Zitierweisen
7

Bergr, Josef. "Návrh a optimalizace provozu tepelného čerpadla." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227156.

Der volle Inhalt der Quelle
Annotation:
The aim of the thesis "Design and optimization of the heat pump" is the project documentation for building permits, finding a suitable source of heat and cold. The problem is solved for a Tesco hypermarket. The device is designed to meet the health, performance and functional requirements for indoor climate. The task of this device is to transport fresh air into the interior cover heat losses in winter and coverage heat gains during the summer. The theoretical part deals with the problem of heat pumps. Special mention is about heat pump air x air. Calculation and design part is a specific prop
APA, Harvard, Vancouver, ISO und andere Zitierweisen
8

Tretera, Robin. "Návrh tepelného čerpadla pro vytápění rodinného domu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2018. http://www.nusl.cz/ntk/nusl-377038.

Der volle Inhalt der Quelle
Annotation:
This diploma thesis provides basic information about the thermal pumps and photovoltaic systems. The heat pumps are described regarding their construction and sources of low potential heat. The description of photovoltaic systems explains the main principle of transformation the solar light to electric power and possible cooperation of this systems with the heat pumps. In practical part of the thesis there is a description of the assessed building and calculation of its thermal losses. It is followed by three designs of the thermal pump systems which are supposed to replace the original way of
APA, Harvard, Vancouver, ISO und andere Zitierweisen
9

Klusák, Ondřej. "Návrh induceru před oběžným kolem odstředivého čerpadla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230101.

Der volle Inhalt der Quelle
Annotation:
The main objective of the thesis is to verify the hydraulic inducer designs and to determine its effect on the cavitation characteristics of the pump. To increase the suction capability and cavitation resistance, the inducer is placed in front of the impeller centrifugal pump. Its role is to protect the impeller against the cavitation. The literary part of the thesis analyzes the issue of cavitation, its origin, development and termination of the cavitation bubble with so-called implosion. Special attention is devoted to describtion of cavitation effect occuring at the hydrodynamic pumps. In t
APA, Harvard, Vancouver, ISO und andere Zitierweisen
10

Železný, Jan. "Návrh vytápění rodinného domu pomocí tepelného čerpadla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254407.

Der volle Inhalt der Quelle
Annotation:
The master’s thesis contains design for heat insulation of a family house for purpose of reducing the heat loss, adding a new room and complete design of heating system. First part is introducing the house, followed by calculating the heat loss for the original building. Next step proposes the heat insulation of constructions, design for the new room and recalculating the modified heat loss including comparison with the original values. Another part is dealing with the design of the heating system, providing calculations of the power requirement and the pressure loss of underfloor heating and
APA, Harvard, Vancouver, ISO und andere Zitierweisen
11

Gášek, Martin. "Návrh olejového čerpadla přídavného převodu vozidla Tatra T158." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318766.

Der volle Inhalt der Quelle
Annotation:
This master’s thesis deals with a new design of an oil pump for Tatra T158 transfer case. The new solution should replace earlier involute internal gear pump which is not able to provide sufficent lubrication. The main problem of the old design is a poor suction at low speeds of the vehicle. Gerotor type of the pump has been chosen. Its main advantages are a convenient specific flow rate and good volumetric efficency. In an analytic calculation of the pump gearing also important functional parameters have been checked, like a pressure angle, flow rate, flow irregularity, specific flow rate, sp
APA, Harvard, Vancouver, ISO und andere Zitierweisen
12

Gerát, Mário. "Návrh zemního tepelného čerpadla s přímým výparem chladiva." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-401542.

Der volle Inhalt der Quelle
Annotation:
Master thesis is focused on design of ground heat pump with direct evaporation. First part is dedicated to description of heat pump technology, cooling circulation and sources of low-potential heat. Heat pump ground-water, its main components, classification of refridgerant and systems of direct evaporation are all described in the second part. The last part consists of design of each individual component of heat pump and solution of ground heat exchanger for direct evaporation of refridgerant.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
13

Čížek, Petr. "NÁVRH AUTOMATICKÉ PIPETOVACÍ HLAVY NA PRINCIPU PERISTALTICKÉHO ČERPADLA." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-442866.

Der volle Inhalt der Quelle
Annotation:
The aim of this diploma thesis is to design and create a prototype of automatic pipetting head that will be useful for pipetting in laboratories after attaching it to a robotic manipulator. In the beginning, a research about various types of automatic pipetting heads was made followed by a device design and component analysis. The prototype was made using 3D printing method and it utilises a peristaltic pump, Arduino microcontroller and Bluetooth interface. A measurement of repeatability and dispensing accuracy was made on the finished device. The results are evaluated in the conclusion.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
14

Kadlec, Jan. "Hydraulický návrh induceru palivového čerpadla pro raketový motor." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-444265.

Der volle Inhalt der Quelle
Annotation:
The aim of this masters thesis is hydraulic design of inducer for given pump geometry and operating parameters. The first part of this thesis deals with cavitation problematic in hydrodynamic pumps. Next section describes two-dimensional design of the inducer and according to that, the 3D CAD model of inducer is made. The later part deals with thorough CFD analysis and determination of the main hydraulic parameters of inducer itself and also with whole pump completed with this inducer. The last section is devoted to inducer design improvement.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
15

Jančík, Kryštof. "Návrh hydrodynamické ucpávky axiálního čerpadla s prstencovým motorem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378400.

Der volle Inhalt der Quelle
Annotation:
This diploma thesis deals with the design of a hydrodynamic seal of an axial pump with an annular motor, and it does so in three main thematic planes: research of current knowledge, simulation and experimental. The research section provides an overview of a broad problem of magnetic fluid seals (ferrohydrodynamic (FHD) seals), current developments in the field of simulation of internal flow in magnetic fluid and in the field of application of FHD technology in sealing liquids. It also covers a wider context of potential use for mechanical circulatory support systems that have had a significant
APA, Harvard, Vancouver, ISO und andere Zitierweisen
16

Dobšáková, Lenka. "Hydraulický návrh difuzoru čerpadla pro dva provozní body." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230100.

Der volle Inhalt der Quelle
Annotation:
The pump is suggested for optimum operation point wherein usually works. If the machine works in the areas of flows except for design point, it will cause decrease in its efficiency or genesis of pulsation. The compromise solution is possible to use the pump in a large range of flows together with high efficiency. The solution is diffuser with double curvature of vanes.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
17

Moravec, Prokop. "Návrh oběžného kola odstředivého čerpadla pro dané parametry." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231500.

Der volle Inhalt der Quelle
Annotation:
This thesis deals with centrifugal pump impeller design for given parameters. This pump impeller design consists of the calculation of basic dimensions, the meridional flow channel design and blade design. Complete design of the pump impeller is afterwards simulated in CFD programme.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
18

Mračková, Alžběta. "X Návrh a optimalizace tepelného čerpadla pro mateřskou školu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228085.

Der volle Inhalt der Quelle
Annotation:
The point of this diploma thesis is heating design with use of heat pump (HP) for nursery building. The first part introduces problems of HP, familiarization with historical development, working principle, description of components, working cycles, partition of heat pumps due to the source of lowpotential heat and possibilities of working operations. In practical part then follows heat loss computation of own building, suitable heat pump choice, economic balance, investment recovery and evaluation of this solution.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
19

Vrbka, Tomáš. "Návrh dvoustupňového čerpadla s protiběžnými koly na zadané parametry." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378486.

Der volle Inhalt der Quelle
Annotation:
This diploma thesis deals with hydraulic design and optimization of the blades of the axial pump. Main objective of the thesis is to design two stage pump with counter-rotating rotors meeting conditions of design point. In addition to the design solution the thesis includes theoretical part which deals with dividing and function description of hydrodynamic pumps.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
20

Trlica, Karel. "Konstrukční návrh a měření tandemového čerpadla jako srdeční náhrady." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378490.

Der volle Inhalt der Quelle
Annotation:
This diploma thesis serves as a constructional study of an axial pump with a tandem arrangement of impellers. It may also be perceived as proposal of possible constructional variants that could be used as cardiac replacements. The thesis offers several conceptual variants, while the selected ones are elaborated in detail. Drawing documentation and 3D models are included in the attachment. The components were dimensioned according to the parameters necessary for proper heart function.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
21

Chromý, Martin. "Návrh zařízení pro zatěžování hřídele čerpadla systému Common Rail radiálními silami." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230271.

Der volle Inhalt der Quelle
Annotation:
The aim of this thesis is a preliminary draft of test equipment for testing fuel injectors Common Rail system with the drive shaft radial loading. The work presents a brief overview of the contemporary designs of the pump system, which then leads on equipment design.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
22

Ošťádal, Michal. "Návrh čerpadla a potrubní trasy pro zajištění vyšší bezpečnosti jaderné elektrárny." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-443200.

Der volle Inhalt der Quelle
Annotation:
The main goal of the diploma thesis is to design the hydraulic part of the new piping system, which is added to the existing project of the Dukovany Nuclear Power Plant. At the beginning of the work is theoretical basis for the design of the hydraulic part. The next part is the selection of piping material for aggressive refrigerant with subsequent verification of the pipe wall thickness. The piping system is designed with specific components from the companies SIGMA GROUP a.s., ARAKO spol. s.r.o. and ARMATURY Group a.s. In the last part, hydraulic solution is developed and commented using the
APA, Harvard, Vancouver, ISO und andere Zitierweisen
23

Gaverník, Michal. "Návrh zdroje chladu pro konkrétní aplikaci." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228185.

Der volle Inhalt der Quelle
Annotation:
This diploma thesis deals with design of chiller for specific aplication – The City Theatre in Brno. The solving equipment of cooling appliance includes complete design of heat exchanger, battery cold and dimensioning of pipeline system used for various media. One part of design is also choice of individual coolant pumps, which guarantee necessary cirkulation of cooling medium in a certain pipeline routes. Selected battery cold in this administration reduced the size of the necessary cooling resources, therefore the cost of implementation. Everything is processed in calculating software. The r
APA, Harvard, Vancouver, ISO und andere Zitierweisen
24

Knap, Zdeněk. "Motor s axiálním magnetickým tokem pro přímý pohon čerpadla." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221187.

Der volle Inhalt der Quelle
Annotation:
This thesis is related to axial flux permanent magnet machines. The first part is describes the basic information about this type of machines. Main part is focused on design of the machine. For the purpose of the preliminary design there is mathematical model of the basic machine. This model is followed by finite elements analysis for the further evaluations and validation of the mathematical design. The last part is evaluating the loses of the machine ant its virtual efficiency.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
25

Ratsam, Pavel. "Tepelné čerpadlo vzduch - voda." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241931.

Der volle Inhalt der Quelle
Annotation:
The master's thesis is focused on heat pumps as a device using sources of a low-potential heat for building's heating. There are individual types of these devices characterized by a principle of operation and used media. Main focus of this thesis is a design of a compact air-water heat pump for the company PZP HEATING a.s. consisting of a cooling circulation’s design and individual components of this circulation. Finally there is a proposal of the heat pump’s case presented at the end of this work.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
26

Krichťáková, Bohdana. "Návrh optimalizace materiálových toků s použitím RFID v expedici." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2019. http://www.nusl.cz/ntk/nusl-400029.

Der volle Inhalt der Quelle
Annotation:
The diploma thesis deals with optimization of material flow using RFID technology in Bosch Diesel company at the Expedition department. The theoretical part defines the basic concepts related to logistics, RFID technology and material flows. The analytical section describes the process of packing, data confirmation and dispatching CP4 pumps to the customer. Based on the analytical part, there are suggestions that optimize the time-consuming process and reduce the error rate of the recorded data to the system.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
27

Svoboda, Pavel. "Návrh těsnění HDR HCČ 317 v JE Paks." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228604.

Der volle Inhalt der Quelle
Annotation:
This diploma work is engaged in replacement of gasket main dividing plane of reactor coolant pumps in nuclear power plant Paks. Of the newly suggested gasket is kammprofile gasket with expanded graphite layer. This work contain suggestion and calculation of new sealing a knot and calculation existing sealing the knot. Results are confrontacion and sequentially is discussed influence on main dividing plane HCČ 317 by use the new and the existing gasket. In this work is contained description brief of legislation. This legislation must keep by design components dedicated for nuclear equipment. Ne
APA, Harvard, Vancouver, ISO und andere Zitierweisen
28

Krejsa, Petr. "Tepelné čerpadlo vzduch - voda." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318814.

Der volle Inhalt der Quelle
Annotation:
The master's thesis deals with the description of heat pump technology (HP) and its use for apartment buildings. The theoretical part contains an introduction, performance of heat pump technology, in particular a compressor heat pump (CHP). In this section is also mentioned about heat pumps for an apartment buildings. Main focus of this thesis is a design of a compact air-water heat pump for the company AISECO spol. s.r.o. This section is focused a design of an individual components of cooling circulation together with proposal of the circulation and principle of operation.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
29

Zejda, Vojtěch. "Návrh vybraných strojně technologických zařízení ČOV se zaměřením na zlepšení hydraulických účinností." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-433503.

Der volle Inhalt der Quelle
Annotation:
The wastewater treatment process is one of the most important processes which contributes to the protection of the environment. This process can also potentially recover necessary and scarce raw materials, such as phosphorus. Research of the wastewater treatment technology is an increasingly relevant topic and more innovative knowledge should be gradually implemented into existing plants. However, the implementation of such technology involves increased investment and often operating costs. This is, why there is a growing interest in improving the energy intensity and hydraulic efficiency of t
APA, Harvard, Vancouver, ISO und andere Zitierweisen
30

Červinka, Martin. "Studie návrhu kalového čerpadla s vířivým kolem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229991.

Der volle Inhalt der Quelle
Annotation:
Diploma thesis deals with problems of design a sludge pump with a vortex impeller. Clearly summarizes the basic information on hydrodynamic pumps with a significant focus on sludge pumps. It contains a design of a vortex impeller, which is supported by CFD (Computational Fluid Dynamic) calculation in software Fluent. The aim of the work is to design vortex impeller, which could replace the existing channel impeller while maintaining the operating parameters of the pump.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
31

Šály, Peter. "Návrh nabídkového diagramu řady čerpadel." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229711.

Der volle Inhalt der Quelle
Annotation:
My diploma thesis describes a procedure of creating interactive computer software for company ISH&MSA Čerpadla a.s. in its theoretical part as well as in its practical part. It is a proposal diagram of centrifugal pumps which consists of made and nonmade pumps. After the selection of a certain pump, according to the required parameters of capacity of pump and transit height, the output of the programme is drawing of a flows characteristic, characteristics of coiled paddlewheel and curves of dissipation without any differences in whether the pump is made or not. There is an operating procedure
APA, Harvard, Vancouver, ISO und andere Zitierweisen
32

Müller, Patrik. "Vícestupňové čerpadlo s protiběžnými koly." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2017. http://www.nusl.cz/ntk/nusl-318819.

Der volle Inhalt der Quelle
Annotation:
The main objective of this thesis is to design blades for the axial pump with two counter-rotating rotors for design point. Then compare results with the standard concept with one runner and guide blades.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
33

Kovář, Jiří. "Návrh regulace tlaku a průtoku v soustavě čerpadlo-nádrž." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-234215.

Der volle Inhalt der Quelle
Annotation:
The proposed work is dealing with control design of pump-tank system as part of broader water-supply network with using of mechatronic approach. The main goal of this work is design of control for regulation of flow, pressure and water level in tank in water-supply network of Vsetin city. This water-supply network consists of various components, such as pumps, pipes, valves, tanks etc. For the purpose of the control design is necessary to create a model of pipe network. The solution of hydraulic analysis is obtained by using the gradient method, which was implemented into the software solution
APA, Harvard, Vancouver, ISO und andere Zitierweisen
34

Macháčková, Petra. "Návrh systému měření teplot na zkušebně tepelných čerpadel." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229426.

Der volle Inhalt der Quelle
Annotation:
This work deals with design of temperature measurement on heat pump test-room. Discusses diferent various variants of thermometers and their placements in measurement circuit. It contains sample software for control and processing of measured data on the test-room, which is controlled by the computer and built-in data acquisition card.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
35

Škývara, Tomáš. "Návrh zkušební kabiny pro testy vysokotlakých čerpadel za snížené teploty." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230198.

Der volle Inhalt der Quelle
Annotation:
The subject of diploma thesis is design of a testing cabin for high pressure pump testing under low temperature. The objective is to project a cooling system and a cooled testing cabin. Suggested cooling system must be sized to cool down the estimated power and the cabin is supposed to be located inside the existing testbench. There was peroformed an analytical calculation of thermic evaluation, several parts of calculation were verified using ANSYS program simulation. The second section of the thesis is focused mainly on the design, especially on design of testing cabin. The result of diploma
APA, Harvard, Vancouver, ISO und andere Zitierweisen
36

Valešová, Jaroslava. "Návrh otopné soustavy s tepelným čerpadlem pro vytápění rodinného domu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-228968.

Der volle Inhalt der Quelle
Annotation:
This master`s thesis deals with low-temperature heating that employs a heat pump. The introduction gives reasons for utilization of the renewable heat sources for heating. The next part focuses on a practical application of renewables on the heating of a family house. It covers a detailed description of the building and the designed heating system which includes: the calculation of thermal losses, design of the low-temperature boiler, heat pump, safety devices, heating elements, sizing and control of the system. The last part is devoted to the assessment of the system performance.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
37

Pejcl, Jiří. "Návrh autonomního topného zdroje." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2014. http://www.nusl.cz/ntk/nusl-220680.

Der volle Inhalt der Quelle
Annotation:
The diploma thesis deals with design of a suitable heat source for heating and hot water. There are dealt with operational costs of different types of heat sources, which are compared with one another. The next part is the implementation of specific proposal of the heat source - heat pump ground/water with deep wells and measuring system. The last part describes measuring several operating modes of the heat pump.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
38

Kořínek, Vladimír. "Návrh ekologického vytápění rodinného domu." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2019. http://www.nusl.cz/ntk/nusl-399500.

Der volle Inhalt der Quelle
Annotation:
This diploma thesis deals with the design of ecological heating for a family house. The main objective is to find the most advantageous variant of the heating and water heating system using a heat pump in cooperation with an alternative heating system. Thermal losses are calculated for the selected object, and several heating designs are made based on the calculations. Then the economic return of the designs is calculated.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
39

Gärtner, Jan. "Návrh lineárního oscilačního pohonu s vnějším buzením." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-228950.

Der volle Inhalt der Quelle
Annotation:
This thesis deals with design of linear external excitation drive with oscillative motion. In the first part of the work is shown describe types of linear motors. Further is a part of analysis of concrete linear drives from patents database. In the next part of this work is straight design of linear external excitation drive with oscillative motion. The conception in-clude geometric model created with software Solidworks, calculation of forces with software Ansys and dynamic models of mechanical and electrical part of drive with software Mat-lab/Simulink. And is a mentions possibility of contr
APA, Harvard, Vancouver, ISO und andere Zitierweisen
40

Skočík, Lukáš. "Návrh otopné soustavy s tepelným čerpadlem vzduch-voda v kombinaci s bivalentním zdrojem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231673.

Der volle Inhalt der Quelle
Annotation:
The thesis is engaged in complete reconstruction of a heat system of a family house with higher heat loss, i.e. heat source, piping and radiators. As a heat source is chosen air-water heat pump. Heat system is designed with panel radiators with regard to minimum building interventions. A required power for hot water heating is calculated and selected a heat pump from suitable power range in combination with storage tank with hot water tank. The bivalent point is determined, as backup source are heating elements installed in storage tank. Drawings and circuit diagrams with safety elements are a
APA, Harvard, Vancouver, ISO und andere Zitierweisen
41

Šeniglová, Hana. "Analýza procesu výroby čerpadel, návrh a optimalizace nového postupu ve firmě Antreg, a.s." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-241697.

Der volle Inhalt der Quelle
Annotation:
This master’s thesis deals with the process of production of oil pump at the company Antreg, a.s. The purpose of the thesis was to design a new technological process without grinding. The goal was achieved by an experiment. The necessary measurements were taken on the front part of the oil pump box. Measurements are described and evaluated in this thesis. As a next step, optimal technological process was applied to other parts of the oil pump box. An economic evaluation was carried out for a selected technical process.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
42

Kunovský, Lukáš. "Optimalizace návrhu čerpací stanice." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378500.

Der volle Inhalt der Quelle
Annotation:
This diploma thesis summarizes the necessary knowledge for the design of the pump station. It focuses on the choice of suitable pumps and control valves. It also provides information on mathematical optimization methods. By combining these two disciplines a program was created that selects the most suitable combination of pumps and valves for the assigned requirements. These can vary over time. The goal of optimization is to minimize initial and operating costs. The phenomena considered are: time-varying flow and head height, serial and parallel co-operation of pumps, throttling control, a cha
APA, Harvard, Vancouver, ISO und andere Zitierweisen
43

Béreš, Matej. "Návrh čerpací stanice pro dopravu hydrosměsi." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231458.

Der volle Inhalt der Quelle
Annotation:
This master’s thesis is concerned about the flow of hydro-mixture in pipelines. In the first part, I am reviewing the characteristics of disperse systems, pumps and pipelines used in hydro-mixture transportation. Slurry pumps and polyethylene HDPE pipelines receive an extra attention. In the second part, I am working with data obtained from the co-operation with the PROGROUPE Sediment Removal company. These data were measured during revitalization of the water dam Gabčíkovo. In the next step, I use the data to suggest the required characteristic for the slurry pump for pump station in project
APA, Harvard, Vancouver, ISO und andere Zitierweisen
44

Fišer, Petr. "Návrh vytápění rodinného domu s vnitřním bazénem." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2008. http://www.nusl.cz/ntk/nusl-228291.

Der volle Inhalt der Quelle
APA, Harvard, Vancouver, ISO und andere Zitierweisen
45

Jankola, Mario. "Návrh vytápění nízkoenergetického rodinného domu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2016. http://www.nusl.cz/ntk/nusl-254414.

Der volle Inhalt der Quelle
Annotation:
This master’s thesis pertains to heating practices of low-energy houses using a heat pump (example 1) and low-temperature condensing boiler (example 2). The first part of the work contains calculations of suggested building’s heat efficiency and of under-floor heating. The second part of the work includes estimates of seasonal heating factors for construction with a heat pump. Based on the comparison: both of these heating systems are recommended; the capacity of the warm water container is established; and safety elements are chosen. Furthermore, a system of regulation for warm water heating
APA, Harvard, Vancouver, ISO und andere Zitierweisen
46

Španihelová, Kateřina. "Návrh otopné soustavy s tepelným čerpadlem vzduch-voda a zdrojem na tuhá paliva pro vytápění rodinného domu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231159.

Der volle Inhalt der Quelle
Annotation:
The aim of this thesis is to design the heating system for the house, including the design and calculating the required quantity of heat for hot water. The specified heat sources are the heat pump air to water and solid fuel boiler. The task was to design the heating system to the fastest possible return on investment. The initial investment in a heat pump is high so it is necessary to design the heating system as efficiently as possible. The thesis contains a complete project of calculating heat loss of the building, the design of heating surfaces and their heat-technical calculation. There i
APA, Harvard, Vancouver, ISO und andere Zitierweisen
47

Truksa, Ondřej. "Návrh větrání a chlazení v multifunkční budově se zubními ordinacemi." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-378484.

Der volle Inhalt der Quelle
Annotation:
The aim of the master’s thesis was to design ventilation and cooling systems in a three-storey mixed-use building, which contained three apartments and two dentists’ surgeries. Two independent ventilation systems were designed in the building, with respect to different purposes of the indoor spaces. The mechanical cooling system was proposed in some of the rooms to improve thermal comfort in summer. The thesis includes calculations of building heat gains, heat losses, air exchange rates and the dimensioning of the ventilation and cooling systems. The thesis also comprises design calculations a
APA, Harvard, Vancouver, ISO und andere Zitierweisen
48

Novák, David. "Návrh štíhlého výrobního procesu se zaměřením na realizaci výrobního layoutu." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-400915.

Der volle Inhalt der Quelle
Annotation:
This thesis deals with the design of a lean manufacturing process with the main focus on the modification of the production layout of the heat pump production line, at Daikin Device Czech Republic s.r.o. In the introductory part of the thesis, the theoretical background is elaborated and then the company is introduced briefly. The next part analyzes the currently produced models, production processes, the line in terms of current layout and finally the process times. Based on these analyzes, a new layout of the production line and storage space is presented. In the next part of the thesis, the
APA, Harvard, Vancouver, ISO und andere Zitierweisen
49

Valek, Ondřej. "Návrh a optimalizace zdroje tepla pro hotelový komplex." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240100.

Der volle Inhalt der Quelle
Annotation:
This Master’s thesis deals with design of heating source and heating system in the model object. Design is based on three variants of sources and heating systems. The first option is a heating pump air/water, the second option is pellet boiler and the third option is heating pump ground/water. At first heating losses are determined. Then heating systems and related heating sources are designed. The fundamental part of these free options is a design of alternative source for central heat and and hot water and heat storage. The last part is comparison of all variants.
APA, Harvard, Vancouver, ISO und andere Zitierweisen
50

Šimek, Pavel. "Návrh systému financování výstavby rodinného domu." Master's thesis, Vysoké učení technické v Brně. Fakulta podnikatelská, 2010. http://www.nusl.cz/ntk/nusl-222468.

Der volle Inhalt der Quelle
Annotation:
The diploma thesis analyzes available methods of financing of a new housing construction with the focus on the possibilities of concurrent investment. The above analysis is demonstrated in a model case study. Practical part contents selection of the products to be analyzed from each evaluated field: suitable mortgage loan, finance market investment, the investment to the alternate heating equipment of the home and photovoltaic power plant. Than demonstrate the possibilities of decreasing the price of the loan with the assistance of concurrent investment into the financial markets or the altern
APA, Harvard, Vancouver, ISO und andere Zitierweisen
Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!

Zur Bibliographie