Einloggen

Thematische Bibliographien / Portable coordinate measurement machines / Zeitschriftenartikel

Um die anderen Arten von Veröffentlichungen zu diesem Thema anzuzeigen, folgen Sie diesem Link: Portable coordinate measurement machines.

Zeitschriftenartikel zum Thema „Portable coordinate measurement machines“

Autor: Grafiati

Veröffentlicht am 28. Juni 2021

Zuletzt aktualisiert am 29. Juli 2025

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit Top-50 Zeitschriftenartikel für die Forschung zum Thema "Portable coordinate measurement machines" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Sehen Sie die Zeitschriftenartikel für verschiedene Spezialgebieten durch und erstellen Sie Ihre Bibliographie auf korrekte Weise.

1

LIN Hu, 林虎, Frank Hrtig Frank Hrtig, Karin Kniel Karin Kniel, and 石照耀 SHI Zhao-yao. "Measurement of large gears by using portable coordinate measuring machines." Optics and Precision Engineering 21, no. 7 (2013): 1763–70. http://dx.doi.org/10.3788/ope.20132107.1763.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

2

Wang, Biao, Nannan Wu, Fuyuan Zhao, et al. "Enhance students’ engineering ability based on virtual three coordinate design and measurement." SHS Web of Conferences 187 (2024): 01023. http://dx.doi.org/10.1051/shsconf/202418701023.

Der volle Inhalt der Quelle

Annotation:

The three coordinate measuring machine (CMM) are increasingly widely used, but because of their high price, not easy to portable and other drawbacks, it is difficult to be widely used in university teaching procedures. Therefore, some disciplines such as measurement and control theories, measurement methods behind of the CMM are hard to well understood, which require students to have strong engineering ability. In order to solve the problem, the paper presents a virtual CMM way to improve the students engineering experience that improve the quality of course teaching as an assist tool. Firstly

APA, Harvard, Vancouver, ISO und andere Zitierweisen

3

King, Peter, Christopher Sansom, and Paul Comley. "Photogrammetry for Concentrating Solar Collector Form Measurement, Validated Using a Coordinate Measuring Machine." Sustainability 12, no. 1 (2019): 196. http://dx.doi.org/10.3390/su12010196.

Der volle Inhalt der Quelle

Annotation:

Concentrating solar power systems currently have a high capital cost when compared with other energy generating systems. The solar energy is captured in the form of thermal energy rather than direct electrical, which is attractive as thermal energy is more straightforward and currently more cost-effective to store in the amounts required for extended plant operation. It is also used directly as industrial process heat, including desalination and water purification. For the technology to compete against other generating systems, it is crucial to reduce the electrical energy cost to less than $0

APA, Harvard, Vancouver, ISO und andere Zitierweisen

4

Gonzalez-Madruga, Daniel, Eduardo Cuesta, Héctor Patiño Sanchez, Joaquín Barreiro, and Susana Martinez-Pellitero. "The Use of Virtual Circles Gauge for a Quick Verification of Portable Measuring Arms." Key Engineering Materials 615 (June 2014): 70–75. http://dx.doi.org/10.4028/www.scientific.net/kem.615.70.

Der volle Inhalt der Quelle

Annotation:

Portable Measuring Arms or Articulated Arm Coordinate Measuring Machines (AACMMs) unique characteristics bring flexibility to the inspection task and allow outside laboratory measurements. However, still a few works study their metrological behavior, uncertainty or assessment. In fact, AACMM assessment involves time consuming and expensive processes mainly inherited from CMM field. A virtual circle gauge similar to ball bars and a methodology based on international standards are proposed in order to simplify the evaluation test. Additionally, two metrological laboratories have evaluated differ

APA, Harvard, Vancouver, ISO und andere Zitierweisen

5

Icli, Caglar, Oleksandr Stepanenko, and Ilian Bonev. "New Method and Portable Measurement Device for the Calibration of Industrial Robots." Sensors 20, no. 20 (2020): 5919. http://dx.doi.org/10.3390/s20205919.

Der volle Inhalt der Quelle

Annotation:

This paper presents an automated calibration method for industrial robots, based on the use of (1) a novel, low-cost, wireless, 3D measuring device mounted on the robot end-effector and (2) a portable 3D ball artifact fixed with respect to the robot base. The new device, called TriCal, is essentially a fixture holding three digital indicators (plunger style), the axes of which are orthogonal and intersect at one point, considered to be the robot tool center point (TCP). The artifact contains four 1-inch datum balls, each mounted on a stem, with precisely known relative positions measured on a

APA, Harvard, Vancouver, ISO und andere Zitierweisen

6

Wang, Sen, Shugui Liu, and Qing Mao. "A CMM-Based Method of Control Point Position Calibration for Light Pen Coordinate Measuring System." Sensors 20, no. 19 (2020): 5592. http://dx.doi.org/10.3390/s20195592.

Der volle Inhalt der Quelle

Annotation:

A light pen coordinate measuring system (LPCMS) is a kind of vision-based portable coordinate measuring technique. It implements coordinate measurement by analyzing the image of a light pen, which has several control points and a probe. The relative positions of control points need to be determined before measurement and serve as the measuring basis in LPCMS. How to accurately calibrate the relative positions of control points is the most important issue in system calibration. In this paper, a new method of control point position calibration based on a traditional coordinate measuring machine

APA, Harvard, Vancouver, ISO und andere Zitierweisen

7

Aidibe, Ali, Souheil Antoine Tahan, and Mojtaba Kamali Nejad. "Interlaboratory Empirical Reproducibility Study Based on a GD&T Benchmark." Applied Sciences 10, no. 14 (2020): 4704. http://dx.doi.org/10.3390/app10144704.

Der volle Inhalt der Quelle

Annotation:

The ASME Y14.5 geometric dimensioning and tolerancing (GD&T) and ISO-GPS (geometrical product specifications) standards define tolerances that can be added to components to achieve the necessary functionality and performance. The zone that each feature must lie within is defined in each tolerance. Measurement processes, including planning, programming, data collection (with contact or without contact), and data processing, check the compliance of the part with these specifications (tolerances). Over the last two decades, many works have been realized by the metrology community to investiga

APA, Harvard, Vancouver, ISO und andere Zitierweisen

8

Sun, Zhen Zhong, Zeng Hong, and Sheng Gui Chen. "Error Model and Simulation to Arbitrary Point of Automobile Panels in Normal Mechanical Parameter Measurement Instrument." Advanced Materials Research 152-153 (October 2010): 263–68. http://dx.doi.org/10.4028/www.scientific.net/amr.152-153.263.

Der volle Inhalt der Quelle

Annotation:

By using homogenous coordinate transformation principle and Denavit-Hartenberg analysis method, a measurement kinematics model and a error model to arbitrary point of automobile panels in normal mechanical parameter measurement instrument, which the movement of the probe center is relative to machine reference frame is construct. On the basis of using wielding matrix function total differential method, building up the error delivery relation of parameter error of measuring motion model transform to the probe center, and having verified what be built the error model correctness by simulation. T

APA, Harvard, Vancouver, ISO und andere Zitierweisen

9

Yuan, Na, and Yong Bo Lv. "Rearch of Geometry Size Detection and Quality Control Method of Tower Materials." Advanced Materials Research 971-973 (June 2014): 139–42. http://dx.doi.org/10.4028/www.scientific.net/amr.971-973.139.

Der volle Inhalt der Quelle

Annotation:

According to the monitoring requirements of the national grid, geometry size detection program and detection methods of tower materials are determined, based on the demands of the engineering and field measurement. Digital Caliper and Portable Three-coordinate Measuring Machine are further chosen as the measuring equipment. By the research of quality control method, geometry size data of tower materials are analyzed by histogram and Xbar-R chart. Geometry size detection of tower materials and quality control system's framework and module are preliminarily designed. Ultimately, it can provide t

APA, Harvard, Vancouver, ISO und andere Zitierweisen

10

Poroskun, Ivan, Christian Rothleitner, and Daniel Heißelmann. "Structure of digital metrological twins as software for uncertainty estimation." Journal of Sensors and Sensor Systems 11, no. 1 (2022): 75–82. http://dx.doi.org/10.5194/jsss-11-75-2022.

Der volle Inhalt der Quelle

Annotation:

Abstract. Ongoing digitalization in metrology and the ever-growing complexity of measurement systems have increased the effort required to create complex software for uncertainty estimation. To address this issue, a general structure for uncertainty estimation software will be presented in this work. The structure was derived from the Virtual Coordinate Measuring Machine (VCMM), which is a well-established tool for uncertainty estimation in the field of coordinate metrology. To make it easy to apply the software structure to specific projects, a supporting software library was created. The lib

APA, Harvard, Vancouver, ISO und andere Zitierweisen

11

Setiawan, Anang Wahyu, Muslimin Muslimin, and Ghany Heryana. "STUDI KINERJA HANDHELD PORTABLE 3D SCANNER DALAM PENGUKURAN DIAMETER DAN KEDALAMAN LUBANG PADA SPESIMEN LOGAM." JTT (Jurnal Teknologi Terapan) 9, no. 1 (2023): 52. http://dx.doi.org/10.31884/jtt.v9i1.420.

Der volle Inhalt der Quelle

Annotation:

A Handheld portable 3D Scanner is an optical-based tool that can be gripped by hand and moved from one place to another. This tool is used to scan part’s surface and produce a 3-dimensional representation in the form of a point cloud. The use of 3D Scanners has grown significantly in recent years, especially in applications in the metrology, industrial manufacturing inspection, and reverse engineering. Apart from the ease of use and flexibility of use, as an optical-based tool with triangulation principles, Handheld Portable 3D Scanners have limitations in scanning the geometric shape of a nar

APA, Harvard, Vancouver, ISO und andere Zitierweisen

12

NAGATAKI, Yuichi. "Articulated Arm Coordinate Measurement Machines." Journal of the Japan Society for Precision Engineering 85, no. 5 (2019): 392–95. http://dx.doi.org/10.2493/jjspe.85.392.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

13

Yang, Yi, Tao Wang, Beilin Qiu, Juan Zheng, and Yuzhou Chang. "Evaluation of Measurement Uncertainty for Fourth Axis Error Calibration of Coordinate Measuring Machines." Highlights in Science, Engineering and Technology 56 (July 14, 2023): 134–38. http://dx.doi.org/10.54097/hset.v56i.10090.

Der volle Inhalt der Quelle

Annotation:

According to the calibration method defined in the specification, a measurement uncertainty evaluation method for the fourth axis error calibration results of coordinate measuring machines is proposed. Establish a measurement uncertainty evaluation model based on calibration methods and analyze the sources of each uncertainty. Based on measurement examples, the evaluation process of measurement uncertainty for the fourth axis error calibration of coordinate measuring machines is elaborated.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

14

Pan, Fangyu, Li Nie, Yuewei Bai, Xiaogang Wang, and Xiaoyan Wu. "Geometric errors measurement for coordinate measuring machines." IOP Conference Series: Earth and Environmental Science 81 (August 2017): 012117. http://dx.doi.org/10.1088/1755-1315/81/1/012117.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

15

Lin, S.-W. "Dynamic measurement accuracy evaluation of coordinate measuring machines." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 215, no. 8 (2001): 1091–97. http://dx.doi.org/10.1243/0954405011519015.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

16

Li, Ye, and Prashanth Reddy Nomula. "Surface-opening feature measurement using coordinate-measuring machines." International Journal of Advanced Manufacturing Technology 79, no. 9-12 (2015): 1915–29. http://dx.doi.org/10.1007/s00170-015-6968-7.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

17

Harvie, A. "Factors affecting component measurement on coordinate measuring machines." Precision Engineering 8, no. 1 (1986): 13–18. http://dx.doi.org/10.1016/0141-6359(86)90004-8.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

18

Matsuda, Jiro. "Uncertainty Analysis of Three-Dimensional Coordinate Measuring Machines." Journal of Robotics and Mechatronics 9, no. 2 (1997): 140–45. http://dx.doi.org/10.20965/jrm.1997.p0140.

Der volle Inhalt der Quelle

Annotation:

On the basis of the condition that the distances between planes be measured in accordance with the ISO guide ""Uncertainty of Measurement"", the uncertainty of measurement of a CMM in the orthogonal coordinate system has been obtained by carrying out a systematic experiment. So the expanded uncertainty is given as 4.4μm.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

19

Dhoska, Klodian, Toomas Kübarsepp, Altin Dorri, and Agus Pramono. "Metrological Overview for Coordinate Measuring Machines." Applied Mechanics and Materials 771 (July 2015): 195–99. http://dx.doi.org/10.4028/www.scientific.net/amm.771.195.

Der volle Inhalt der Quelle

Annotation:

In manufacturing system, 3D Coordinate Measuring Machines (CMM) are widely used for inspection services where the product should be subjected to the verification of design specifications. It is usually necessary to know the accuracy of 3D CMM equipment during the verification process of the product quality in mass production. To insure and increase the accuracy of 3D CMM the international series standards ISO 10360 are used. This paper presents the importance of the establishment of traceability to international standards as a key role for the reliability of 3D CMM measurement results.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

20

Bochkarev, Petr, Oleg Zakharov, and Evgeniia Reshetnikova. "Control spherical surface on coordinate-measurement machines by minimum measurement volume." PNIPU Bulletin. The mechanical engineering, materials science, no. 4 (December 25, 2015): 5–16. http://dx.doi.org/10.15593/2224-9877/2015.4.01.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

21

Zhang, Haitao, Shugui Liu, and Xinghua Li. "A study on the key techniques of application of REVO five-axis system in non-orthogonal coordinate measuring machine." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231, no. 4 (2016): 730–36. http://dx.doi.org/10.1177/0954405416666906.

Der volle Inhalt der Quelle

Annotation:

REVO five-axis system, designed for the orthogonal coordinate measuring machines, must be reconfigured for the application in the non-orthogonal coordinate measuring machines. First, in this article, error sources of the system and components of measurement data are analyzed; then, scale values of coordinate measuring machine axes, which are essential to derive the coordinates of measured points in non-orthogonal coordinate measuring machine, are separated out. Besides, the mathematical model of REVO is established based on the quasi-rigid body theory, from which the measurement results can be

APA, Harvard, Vancouver, ISO und andere Zitierweisen

22

Woźniak, Adam, and Grzegorz Krajewski. "CMM Dynamic Properties of the Scanning Measurement of a 2D Profile." International Journal of Automation Technology 9, no. 5 (2015): 530–33. http://dx.doi.org/10.20965/ijat.2015.p0530.

Der volle Inhalt der Quelle

Annotation:

Scanning probe CMMs have come to be considered the standard in coordinate metrology, not only because they provide high-quantity, high-speed data gathering but also because the scanning technology significantly decreases inspection time. Modern manufacturing, especially in today’s highly competitive economy, requires increasingly efficient measuring machines and processes because inspection machines have often become the bottlenecks in the entire manufacturing processes. More efficient coordinate metrology can mean faster measurement cycles with acceptable accuracies. However, increasing scann

APA, Harvard, Vancouver, ISO und andere Zitierweisen

23

Zheng, Dateng, Zhongyue Xiao, and Xiang Xia. "Multiple measurement models of articulated arm coordinate measuring machines." Chinese Journal of Mechanical Engineering 28, no. 5 (2015): 994–98. http://dx.doi.org/10.3901/cjme.2015.0716.095.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

24

Prakasvudhisarn, Chakguy, and Shivakumar Raman. "Framework for Cone Feature Measurement Using Coordinate Measuring Machines." Journal of Manufacturing Science and Engineering 126, no. 1 (2004): 169–77. http://dx.doi.org/10.1115/1.1644541.

Der volle Inhalt der Quelle

Annotation:

Complex forms such as conicity have been largely ignored in the coordinate form literature, in spite of the sufficient need to inspect them in parts such as tapered rollers in bearings. This paper attempts to develop guidelines for inspection of cones and conical frustums using probe-type coordinate measuring machines. The sampling problem, the path determination, and fitting of form zones are each addressed in detail. Moreover, an integrative approach is taken for form verification and detailed experimental analysis is conducted as a pilot study for demonstrating the need for the same. Three

APA, Harvard, Vancouver, ISO und andere Zitierweisen

25

Saunders, Per, Alan Wilson, Nick Orchard, Neil Tatman, and Paul Maropoulos. "An Exploration into Measurement Consistency on Coordinate Measuring Machines." Procedia CIRP 25 (2014): 19–26. http://dx.doi.org/10.1016/j.procir.2014.10.005.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

26

Gao, Guan Bin, Wen Wang, Hong Qiang Li, and Jian Jun Zhou. "Kinematic Modeling and Analysis of Articulated Arm Coordinate Measuring Machines." Applied Mechanics and Materials 241-244 (December 2012): 494–97. http://dx.doi.org/10.4028/www.scientific.net/amm.241-244.494.

Der volle Inhalt der Quelle

Annotation:

The articulated arm coordinate measuring machine (AACMM) is a new type coordinate measuring machine (CMM) base on the linkage structure with the characteristics of small size, light weight, large measurement range and flexible movement. The kinematic modeling methods of six degree of freedom (6-DOF) AACMMs are studied in this paper. By analyzing the structural characteristics of AACMMs the kinematic model of a 6-DOF AACMM with DH method was established. From the kinematic model the coordinate systems and structural parameters of the AACMM are obtained. Then the homogeneous transformation matri

APA, Harvard, Vancouver, ISO und andere Zitierweisen

27

Ratajczyk, Eugeniusz. "New types of coordinate measuring machines and symbols used for their parameters Part III. Examples of cantilever type machines." Mechanik 90, no. 7 (2017): 571–73. http://dx.doi.org/10.17814/mechanik.2017.7.76.

Der volle Inhalt der Quelle

Annotation:

Coordinate measuring machines of cantilever type are specifically intended for use in production environment, for measurement of the produced parts and machine elements, especially automotive parts. Common types of these machines are presented with their properties, such as measuring range and accuracy explained.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

28

Zhong, Wenbin, Wenhan Zeng, Guoyu Yu, and Xiangqian Jiang. "Development of an on-machine surface measurement system for an ultra-precision five-axis machine." MATEC Web of Conferences 401 (2024): 13007. http://dx.doi.org/10.1051/matecconf/202440113007.

Der volle Inhalt der Quelle

Annotation:

Ever-increasing demand for complex freeform surfaces machined by ultra-precision five-axis machines necessitates efficient on-machine surface measurement (OMSM) systems. While OMSM offers significant advantages in metrology efficiency and machining accuracy, integrating it with these machines presents a challenge due to complex data synchronization and processing. This paper addresses this challenge by proposing a dedicated controller for synchronized acquisition of sensor measurement data and machine coordinate data. Additionally, a straightforward sensor alignment method is presented. The ef

APA, Harvard, Vancouver, ISO und andere Zitierweisen

29

Gruszka, Józef, Michał Wieczorowski, Barbara Śmierzchalska, Maciej Szelewski, Ireneusz Zachwiej, and Damian Śmierzchalski. "ITA Calibration Laboratory." Mechanik 91, no. 5-6 (2018): 430–33. http://dx.doi.org/10.17814/mechanik.2018.5-6.53.

Der volle Inhalt der Quelle

Annotation:

In the paper a process of implementation of management system according to PN-EN ISO/IEC 17025 for ITA Calibration Laboratory was presented. Laboratory was granted an accreditation from PCA regarding calibration of universal testing machines and technological devices for tensile forces and compression forces as well as coordinate measurement systems with optical distance sensors and coordinate measurement systems based on technique of optical scanners for rotary symetrical work pieces.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

30

Shen, Yijun, Jieji Ren, Nuodi Huang, Yang Zhang, Xinquan Zhang, and Limin Zhu. "Surface form inspection with contact coordinate measurement: a review." International Journal of Extreme Manufacturing 5, no. 2 (2023): 022006. http://dx.doi.org/10.1088/2631-7990/acc76e.

Der volle Inhalt der Quelle

Annotation:

Abstract Parts with high-quality freeform surfaces have been widely used in industries, which require strict quality control during the manufacturing process. Among all the industrial inspection methods, contact measurement with coordinate measuring machines or computer numerical control machine tool is a fundamental technique due to its high accuracy, robustness, and universality. In this paper, the existing research in the contact measurement field is systematically reviewed. First, different configurations of the measuring machines are introduced in detail, which may have influence on the c

APA, Harvard, Vancouver, ISO und andere Zitierweisen

31

Zhao, J., Y. T. Fei, X. H. Chen, and H. T. Wang. "Research on high-speed measurement accuracy of coordinate measuring machines." Journal of Physics: Conference Series 13 (January 1, 2005): 167–70. http://dx.doi.org/10.1088/1742-6596/13/1/039.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

32

Zheng, Dateng, Chengtao Du, and Yonggang Hu. "Research on optimal measurement area of flexible coordinate measuring machines." Measurement 45, no. 3 (2012): 250–54. http://dx.doi.org/10.1016/j.measurement.2011.12.008.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

33

Liu, S. G., K. Peng, F. S. Huang, Guo Xiong Zhang, and P. Li. "A Portable 3D Vision Coordinate Measurement System Using a Light Pen." Key Engineering Materials 295-296 (October 2005): 331–36. http://dx.doi.org/10.4028/www.scientific.net/kem.295-296.331.

Der volle Inhalt der Quelle

Annotation:

A portable three-dimensional vision coordinate measuring system is proposed in this paper. It consists of a light pen, a CCD camera and a laptop computer. The light pen is a hand-held probe with three point light sources using LEDs and a spherical touch stylus arranged in one line. The CCD camera takes the image of LEDs on the light pen and the 3D coordinates of measured point at the center of touch stylus are obtained by computing the positions of LEDs in the image when the probe contacts the object surface. The equations of the vision measurement system are derived by using perspective of th

APA, Harvard, Vancouver, ISO und andere Zitierweisen

34

Hawryluk, Marek, Marek Kuran, and Jacek Ziemba. "The use of replicas in the measurement of machine elements with use of contact coordinate measurements." Mechanik 91, no. 11 (2018): 958–60. http://dx.doi.org/10.17814/mechanik.2018.11.169.

Der volle Inhalt der Quelle

Annotation:

Modern technology allows to design and manufacture machine elements with complex geometry that makes it difficult or even impossible to use coordinate measuring machines for verification of them. The article presents the possibility of using replicas of product geometry to control geometric features using contact measurements on a coordinate machine.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

35

Baldo, Crhistian Raffaelo, and Gustavo Daniel Donatelli. "Experimental Performance Study of Industrial-Grade Coordinate Measuring Machines Using a Calibrated Production Workpiece." Key Engineering Materials 613 (May 2014): 118–24. http://dx.doi.org/10.4028/www.scientific.net/kem.613.118.

Der volle Inhalt der Quelle

Annotation:

The measurement of a part on a coordinate measuring machine may be affected by many factors such as machine frame accuracy, probe configuration, measuring environment, and measurement strategy. In order to understand the effect of some of those factors on measurements performed in industrial-grade machines, a master production workpiece has been chosen and circulated in Brazilian industries for collecting data points of the calibrated workpiece features according to a predefined master measuring protocol. Conclusions could be drawn about the behavior of each machine under varying conditions, m

APA, Harvard, Vancouver, ISO und andere Zitierweisen

36

Jiang, Zhihua, Wenjian Zhang, and Lizhen Cui. "Research of three dimensional laser scanning coordinate measuring machine." MATEC Web of Conferences 232 (2018): 02015. http://dx.doi.org/10.1051/matecconf/201823202015.

Der volle Inhalt der Quelle

Annotation:

Three dimensional laser scanning coordinate measuring machine is suitable for the measurement of 3D printing products, and its measuring range depends on the three coordinate measuring machine. It is the main 3D printing product measuring instrument [1]. In this paper, the principle of laser scanning three coordinate measuring machine is analyzed. The accuracy and reliability of the calibration system for 3D printing products are verified. According to the newly revised JJF 1064 Calibration specification for coordinate measuring machines [3], it is calibrated.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

37

Avila, Agustín Brau, Jorge Santolaria Mazo, Margarita Valenzuela Galván, and Juan José Aguilar Martín. "Mechanical design of an indexed metrology platform for verification of portable coordinate measuring machines." International Journal of Mechatronics and Manufacturing Systems 7, no. 2/3 (2014): 194. http://dx.doi.org/10.1504/ijmms.2014.064751.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

38

Iskenderzade, E. B., and Sh V. Ahmedova. "INVESTIGATION OF THE TEMPERATURE ERROR OF COORDINATE MEASURING MACHINES." Kontrol'. Diagnostika, no. 304 (October 2023): 54–59. http://dx.doi.org/10.14489/td.2023.10.pp.054-059.

Der volle Inhalt der Quelle

Annotation:

Coordinate measuring machines are widely used for technological control of geometric parameters of the surface of various parts in many branches of industrial production. For coordinate measurements of high-precision surfaces, instrumental sources of error can be minimized if the axes of the controlled object are located on the same axis of the reference scale of the comparator or parallel to it. However, in all schemes of construction of coordinate measuring machines, the Abbe principle is violated, which leads to the appearance of a measurement error, which, moreover, increases with the incr

APA, Harvard, Vancouver, ISO und andere Zitierweisen

39

Rudy, Vladimír, Marián Králik, Peter Malega, and Naqib Daneshjo. "The Off-Line Simulation on Measuring through Software PC-DMIS CAD++ V4.3." Applied Sciences 11, no. 14 (2021): 6556. http://dx.doi.org/10.3390/app11146556.

Der volle Inhalt der Quelle

Annotation:

The article analyses and evaluates the ever-important topic of assessing geometric deviation of tolerated formations related to bases with the usage of coordinate measuring machines. The basic system for off-line simulation consists of the coordinate planes of a component’s coordinate system. At the beginning of the measurement, the coordinate system is created by the “3–2–1” alignment. Due to production deviations in real surfaces of the component, each measurement generates mutually different coordinate systems, which is well proven by the experiment on measuring with a coordinate measuring

APA, Harvard, Vancouver, ISO und andere Zitierweisen

40

Yang, Yi, Tao Wang, Yuzhou Chang, and Wei Zhang. "Evaluation of Uncertainty in Linear Plane Angle Measurement based on Coordinate Measuring Machines." Highlights in Science, Engineering and Technology 107 (August 15, 2024): 254–58. http://dx.doi.org/10.54097/3gya0s44.

Der volle Inhalt der Quelle

Annotation:

According to the measurement method of linear plane angle based on coordinate measuring machine (CMM), establish a black box evaluation model for the uncertainty of CMM linear plane angle measurement, and analyze the sources of each uncertainty. Combining measurement examples, this paper elaborates on the uncertainty evaluation process of linear plane angle measurement based on CMM, calculates the extended uncertainty of linear plane angle measurement based on CMM, and provides a reference for the uncertainty evaluation of linear plane angle measurement based on CMM.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

41

Yang, Yi, and Tao Wang. "Evaluation of Uncertainty in Linear Cylindrical Diameter Measurement based on Coordinate Measuring Machines." Highlights in Science, Engineering and Technology 111 (August 19, 2024): 549–53. http://dx.doi.org/10.54097/kea5r781.

Der volle Inhalt der Quelle

Annotation:

According to the measurement method of linear cylindrical diameter based on coordinate measuring machine (CMM), establish a black box evaluation model for the uncertainty of CMM linear cylindrical diameter measurement, and analyze the sources of each uncertainty. Combining measurement examples, this paper elaborates on the uncertainty evaluation process of linear cylindrical diameter measurement based on CMM, calculates the extended uncertainty of linear cylindrical diameter measurement based on CMM, and provides a reference for the uncertainty evaluation of linear cylindrical diameter measure

APA, Harvard, Vancouver, ISO und andere Zitierweisen

42

Yang, Yi, Tao Wang, Yuzhou Chang, Zhengzhong Zeng, and Xiaojie Zhu. "Evaluation of Uncertainty in Nonlinear Planar Distance Measurement based on Coordinate Measuring Machines." Highlights in Science, Engineering and Technology 111 (August 19, 2024): 544–48. https://doi.org/10.54097/19pq4a94.

Der volle Inhalt der Quelle

Annotation:

According to the measurement method of nonlinear planar distance based on coordinate measuring machine (CMM), establish a black box evaluation model for the uncertainty of CMM nonlinear planar distance measurement, and analyze the sources of each uncertainty. Combining measurement examples, this paper elaborates on the uncertainty evaluation process of nonlinear planar distance measurement based on CMM, calculates the extended uncertainty of nonlinear planar distance measurement based on CMM, and provides a reference for the uncertainty evaluation of nonlinear planar distance measurement based

APA, Harvard, Vancouver, ISO und andere Zitierweisen

43

Alexander, Dihtievskiy, and Kvasnikov Volodymyr. "Analysis of the methods of measurement of the cylindrical gear involute." Technology audit and production reserves 2, no. 2(46) (2019): 19–24. https://doi.org/10.15587/2312-8372.2019.168713.

Der volle Inhalt der Quelle

Annotation:

<em>The object of research in this work is the process of measuring the involute of a cylindrical gear by using coordinate measuring machines based on new physical principles, equipment and methods. To date, the metrological assurance of measuring the parameters of gears has been based on tools for the tooth and other equipment. All of them have a limited range of measurement parameters, different accuracy and nomenclature of measured values. Many of them are morally obsolete, not automated, do not have access to computer tools and do not provide the modern level of accuracy, information conte

APA, Harvard, Vancouver, ISO und andere Zitierweisen

44

Kozlovskyi, V. V. "INTELLIGENT CONTROL SYSTEM WHEN MEASURING DETAILS ON A COORDINATE MEASURING MACHINES." Key title: Zbìrnik naukovih pracʹ Odesʹkoï deržavnoï akademìï tehnìčnogo regulûvannâ ta âkostì, no. 2(25) (2024): 70–74. https://doi.org/10.32684/2412-5288-2024-2-25-70-74.

Der volle Inhalt der Quelle

Annotation:

Modern coordinate measuring machines (CMM), widely used in various fields of industrial metrology, face a wide range of errors arising from the combined influence of geometric imperfections, thermal deformations, and dynamic disturbances. These factors, acting both individually and in combination, have a significant and often unpredictable impact on the overall accuracy and reliability of measurement results obtained using such equipment. This paper describes the development and implementation of an advanced intelligent control system designed to continuously monitor, analyze, predict, and act

APA, Harvard, Vancouver, ISO und andere Zitierweisen

45

Watanabe, M., and Ryoshu Furutani. "Development of a Sensitive Probe for Coordinate Measuring Machines." Key Engineering Materials 295-296 (October 2005): 325–30. http://dx.doi.org/10.4028/www.scientific.net/kem.295-296.325.

Der volle Inhalt der Quelle

Annotation:

Requirement for precision measurement becomes extremely advanced as industrial needs advances. CMM (Coordinate Measuring Machine) is one of the most adequate measuring machines to meet the requirement. As the precision of CMM becomes higher, it is important to improve the sensitivity of probe. We developed a contact type probe which consisted of a QPD (quadratic photo diode), a ball lens, and a laser diode to detect the displacement of stylus. The probe system has a resolution of 31nm.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

46

Serban, P. E., and F. Peti. "Studies related the measurement errors determination in case of inclined surfaces measurement on Coordinate Measurement Machines." IOP Conference Series: Materials Science and Engineering 898 (August 25, 2020): 012042. http://dx.doi.org/10.1088/1757-899x/898/1/012042.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

47

Kondo, Yohan, Kazuyuki Sasajima, Sonko Osawa, Osamu Sato, Tsukasa Watanabe, and Masaharu Komori. "Optimized measurement strategy for multiple-orientation technique on coordinate-measuring machines." Measurement Science and Technology 20, no. 10 (2009): 105105. http://dx.doi.org/10.1088/0957-0233/20/10/105105.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

48

Vogel, M., N. Ebinger, M. Rosenberger, and G. Linß. "A novel strategy for cost-efficient measurements with coordinate measurement machines." Journal of Physics: Conference Series 238 (July 1, 2010): 012038. http://dx.doi.org/10.1088/1742-6596/238/1/012038.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

49

Mu, Y. H., and B. K. A. Ngoi. "Dynamic Error Compensation of Coordinate Measuring Machines for High-Speed Measurement." International Journal of Advanced Manufacturing Technology 15, no. 11 (1999): 810–14. http://dx.doi.org/10.1007/s001700050136.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

50

Yang, Yi, Tao Wang, Wei Zhang, and Yuzhou Chang. "Evaluation of Uncertainty in Flatness Measurement of Coordinate Measuring Machines Based on Monte Carlo." Transactions on Engineering and Technology Research 1 (December 20, 2023): 143–47. http://dx.doi.org/10.62051/ttxbgr96.

Der volle Inhalt der Quelle

Annotation:

Based on the measurement method of coordinate measuring machine flatness, establish a black box evaluation model for CMM flatness measurement uncertainty, and analyze the sources of each uncertainty. Combining measurement examples, this paper elaborates on the evaluation process of CMM flatness measurement uncertainty based on Monte Carlo, calculates the included interval and expanded uncertainty of CMM flatness, and provides reference for the evaluation of CMM flatness measurement uncertainty.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!