Einloggen

Thematische Bibliographien / Pump Press / Zeitschriftenartikel

Um die anderen Arten von Veröffentlichungen zu diesem Thema anzuzeigen, folgen Sie diesem Link: Pump Press.

Zeitschriftenartikel zum Thema „Pump Press“

Autor: Grafiati

Veröffentlicht am 4. Juni 2021

Zuletzt aktualisiert am 29. Juli 2025

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit Top-50 Zeitschriftenartikel für die Forschung zum Thema "Pump Press" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Sehen Sie die Zeitschriftenartikel für verschiedene Spezialgebieten durch und erstellen Sie Ihre Bibliographie auf korrekte Weise.

1

Gao, Jun, Guo Yi Yan, Gen Yun Peng, and Guan Nan Xi. "Experiment Study on Performances of Servo Pump Used in Hydraulic Press Machine." Advanced Materials Research 516-517 (May 2012): 892–95. http://dx.doi.org/10.4028/www.scientific.net/amr.516-517.892.

Der volle Inhalt der Quelle

Annotation:

As we known, the energy efficiency of pump-control system is higher than valve-control system. So, using pump-control system to replace valve-control system has a positive meaning to improve the energy efficiency in hydraulic press machine. In order to research the performance of servo pump used in hydraulic press machines, the present study is conducted. First, a test bench for comparison of pump-control and valve-control system is established. In this test bench, the pump of former valve-control system and the servo pump are settled. These two pumps are switched by solenoid to supply oil for

APA, Harvard, Vancouver, ISO und andere Zitierweisen

2

Nugroho, Wahyu Isti, Muhammad Rienaldy Karuana, and Timotius Anggit Kristiawan. "Penambahan Alat Bantu Pemindah Produk Menggunakan Pneumatik dan Karakuri pada Mesin Cup Lower Pump Wire Press PT. Mitsuba Indonesia." Jurnal Rekayasa Mesin 16, no. 1 (2021): 56. http://dx.doi.org/10.32497/jrm.v16i1.2516.

Der volle Inhalt der Quelle

Annotation:

Pemindahan produk dari mesin press memiliki resiko yang sangat tinggi terhadap keselamatan operator. Salah satu mesin yang terdapat di PT Mitsuba Indonesia adalah Press Fit Pump Assy yang berfungsi untuk menyatukan lower cup dan upper cup module fuel pump. Permasalahan yang terjadi yaitu kapasitas produksi belum tercapai. Penyebabnya adalah ruang di dalam mesin yang cukup sempit, sehingga gerakan operator kurang leluasa dan perlu waktu pada saat pengambilan produk. Solusi untuk mengatasi masalah tersebut yaitu melakukan modifikasi pada mesin Cup Lower Pump Wire Press dengan menambahkan alat ba

APA, Harvard, Vancouver, ISO und andere Zitierweisen

3

Chen, Jiayin, Kaifeng Liu, Foon-yee Chan, et al. "Usability Testing for Smart IV Pumps Through Simulation-based Evaluation." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 63, no. 1 (2019): 2209–10. http://dx.doi.org/10.1177/1071181319631187.

Der volle Inhalt der Quelle

Annotation:

Poorly designed user interfaces limit the effective use of medical devices, leading to user errors. Hence, before such devices are implemented, it is essential to identify potential usability issues. A common approach to testing usability is a simulation-based test, which allows practitioners to identify usability issues by observing how users interact with the product being tested. Infusion pumps are frequently used in medical settings, and much effort has been made to advance their design and features. To enhance patient safety, smart intravenous (IV) pumps with safety functions (e.g., drug

APA, Harvard, Vancouver, ISO und andere Zitierweisen

4

Nowogoński, Ireneusz, Ewa Ogiołda, and Marlena Kubiszyn. "MODELING OF PUMP OPERATION CONDITIONS IN GRAVITY-PRESSURE COMBINED SYSTEMS." Zeszyty Naukowe Uniwersytetu Zielonogórskiego / Inżynieria Środowiska 168, no. 48 (2017): 35–44. http://dx.doi.org/10.5604/01.3001.0011.5886.

Der volle Inhalt der Quelle

Annotation:

The paper presents the problem of working conditions in gravitationalpressure systems simulation. The practical example takes into account the dynamical analysis of a system equipped with 10 pump stations with different functions. Both local press stations, local stations for shallowing network and transit pumping stations between the towns were used. The model allowed to optimize the active volume of the pump station tanks, the selection of pumps, including the frequency of power on and the time of holding the sewage.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

5

Lu, Jinqi, and Dezhong Wang. "Integrated design and hydraulic model optimization of model horizontal main pump based on CFD fluid dynamics analysis." Journal of Physics: Conference Series 2707, no. 1 (2024): 012026. http://dx.doi.org/10.1088/1742-6596/2707/1/012026.

Der volle Inhalt der Quelle

Annotation:

Abstract There are few studies and reports related to horizontal main pumps for nuclear power plants. The installation of vertical main pumps for small reactors requires the design of special elbows on the pressure vessel. Horizontal main pump, as a new main pump structure, can reduce the diameter of the main pressure vessel and simplify the structure of the pressure vessel. Compared with the vertical main pump, the horizontal main pump needs to control its axial dimension to improve its stiffness, which makes it impossible to set a long straight pipe section at the inlet, which has an impact

APA, Harvard, Vancouver, ISO und andere Zitierweisen

6

Antsifirov, A. A., and V. A. Krivoshein. "Selection of the optimal hydraulic drive for the press." Glavnyj mekhanik (Chief Mechanic), no. 7 (June 11, 2021): 50–60. http://dx.doi.org/10.33920/pro-2-2107-05.

Der volle Inhalt der Quelle

Annotation:

The research presented in the article is devoted to the selection of the electric motor of the hydraulic press drive with a nominal force of 5MN. The article presents the main characteristics and the description of the press operation using the means of mechanization of the technological process of pressure treatment. Using the Deform-3D software package, the process of stamping the crosspiece of the ZIL-130 cardan shaft was simulated. Based on the presented hydraulic scheme of the press, its topological model was formed in the PA-9 software package. The deformation force obtained in the cours

APA, Harvard, Vancouver, ISO und andere Zitierweisen

7

Ibrahim, Maulana Malik, Dezya Aditya Pratama, and Yudi Nata. "MENENTUKAN VARIABEL YANG PALING BERPENGARUH TERHADAP KINERJA POMPA HIDRAM MENGGUNAKAN METODE ESTIMASI EFEK ALGORITMA YATES." Jurnal Permadi: Perancangan, Manufaktur, Material dan Energi 2, no. 2 (2020): 53–58. http://dx.doi.org/10.52005/permadi.v2i2.63.

Der volle Inhalt der Quelle

Annotation:

In each study, often many variables are used and interrelated with each other. The increasing number of variables often confuses which variables are the most dominant for changes or desired results.Many methods are used to find the most dominant variable in influencing the research output.Factorial 2 3design with estimated effects of Yates algorithm is a method that can be used to find the most dominant variable in influencing output. This study aims to find the most dominant variable on the output pressure generated by the hydram pump. The results calculated using this method are the result o

APA, Harvard, Vancouver, ISO und andere Zitierweisen

8

Ansori, Faisal, and Edi Widodo. "Analysis on Centrifugal Pump Performance in Single, Serial, and Parallel." Journal of Energy, Mechanical, Material and Manufacturing Engineering 3, no. 2 (2018): 79. http://dx.doi.org/10.22219/jemmme.v3i2.6958.

Der volle Inhalt der Quelle

Annotation:

The pump is a tool to provide the mechanical energy to the liquid in the pump constant fluid density and large. In terms of mechanism, the pump is divided into three types, namely, rotary pumps, pump the shaft/piston and centrifugal pumps. The use of the pump are the most widely used either in the household or in the environment industry. In the centrifugal pumps, there are losses – losses among other head losses. To find the head losses among other data needs head on the pump, the pump and the discharge flow rate of the pump. Head is defined as energy per unit weight of the fluid. The head of

APA, Harvard, Vancouver, ISO und andere Zitierweisen

9

Uesugi, Kaoru, Keizo Nishiyama, Koki Hirai, et al. "Survival Rate of Cells Sent by a Low Mechanical Load Tube Pump: The “Ring Pump”." Micromachines 11, no. 4 (2020): 447. http://dx.doi.org/10.3390/mi11040447.

Der volle Inhalt der Quelle

Annotation:

A ring pump (RP) is a useful tool for microchannels and automated cell culturing. We have been developing RPs (a full-press ring pump, FRP; and a mid-press ring pump, MRP). However, damage to cells which were sent by the RP and the MRP was not investigated, and no other studies have compared the damage to cells between RPs and peristaltic pumps (PPs). Therefore, first, we evaluated the damage to cells that were sent by a small size FRP (s-FRP) and small size MRPs (s-MRPs; gap = 25 or 50 μm, respectively). “Small size” means that the s-FRP and the s-MRPs are suitable for microchannel-scale appl

APA, Harvard, Vancouver, ISO und andere Zitierweisen

10

Zhao, Meng, Ji Bin Zou, and Jing Shang. "The Out-Rotator of Spin Traveling Wave Pump on Magnetic Fluid." Key Engineering Materials 503 (February 2012): 3–7. http://dx.doi.org/10.4028/www.scientific.net/kem.503.3.

Der volle Inhalt der Quelle

Annotation:

According to researching the spin traveling wave pump, the relationship of the characteristics of magnetic fluid and the press is investigated under the spin magnetic field by the theory method. The relationship of moving, magnetic field and press is investigated by the decoupled computation between the magnetic field and force. The method is scientificity and rationality by the testing. The distributing shape of magnetic fluid in the pump is affected by the adding magnetic field under the spin magnetic field when the magnetic fluid is filled in the pump. At the same time, the adding magnetic

APA, Harvard, Vancouver, ISO und andere Zitierweisen

11

Zheng, Hong Bo, and You Song Sun. "Research on Pump-Controlled Servo Hydraulic Press and its Energy Consumption Experiments." Advanced Materials Research 988 (July 2014): 590–96. http://dx.doi.org/10.4028/www.scientific.net/amr.988.590.

Der volle Inhalt der Quelle

Annotation:

A solution was proposed to reform the traditional hydraulic presses by the technology of pump-controlled servo hydraulic power: PMSM(Permanent magnet synchronous servo motor ) and fixed displacement pump replaced the traditional inductive motor and fixed displacement pump as the power unit ; the electromagnetic reversing system, the rapid cylinder and the prefill system were kept; displacement sensors, pressure sensors and a proportional relief valve were added to the hydraulic system. A deep drawing process was taken as an example to analyze the energy consumption by experiments. The results

APA, Harvard, Vancouver, ISO und andere Zitierweisen

12

Kruk, Bartłomiej. "Technical Note. Influence of Material Used for the Regenerator on the Properties of a Thermoacoustic Heat Pump." Archives of Acoustics 38, no. 4 (2013): 565–70. http://dx.doi.org/10.2478/aoa-2013-0067.

Der volle Inhalt der Quelle

Annotation:

Abstract Research in termoacoustics began with the observation of the heat transfer between gas and solids. Using this interaction the intense sound wave could be applied to create engines and heat pumps. The most important part of thermoacoustic devices is a regenerator, where press of conversion of sound energy into thermal or vice versa takes place. In a heat pump the acoustic wave produces the temperature difference at the two ends of the regenerator. The aim of the paper is to find the influence of the material used for the construction of a regenerator on the properties of a thermoacoust

APA, Harvard, Vancouver, ISO und andere Zitierweisen

13

Prasad, V. S. Durga, and Sangeetha Subramanian. "Successful filter press pump selection guide." Filtration + Separation 51, no. 5 (2014): 28–31. http://dx.doi.org/10.1016/s0015-1882(14)70183-1.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

14

Chavan, Gajanan. "Design and Analysis of Hydraulic Mini Press Machine." INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT 09, no. 05 (2025): 1–9. https://doi.org/10.55041/ijsrem47945.

Der volle Inhalt der Quelle

Annotation:

Abstract - This project presents the design, development, and analysis of a hydraulic small press machine. The project's main goal is to create a small, functional, and reasonably priced hydraulic press that can be used for a variety of tasks, including pressing, shaping, and assembling small work pieces. With the use of hydraulic power and Pascal's Law, the machine can produce large forces with little input. Choosing the right materials, parts, and sizes for hydraulic systems such as pumps, cylinders, and valves are all part of the design process. With a pump power consumption of roughly 1.16

APA, Harvard, Vancouver, ISO und andere Zitierweisen

15

Hajar, Ibnu. "Pengaruh tipe bantalan bola pada poros pompa sentrifugal terhadap sinyal getaran." Jurnal POLIMESIN 16, no. 1 (2018): 25. http://dx.doi.org/10.30811/jpl.v16i1.552.

Der volle Inhalt der Quelle

Annotation:

Pompa sentrifugal merupakan salah satu pompa yang sangat banyak digunakan pada industri pengolahan, seperti industri pengolahan air minum, industri pengolahan minyak, dan pabrik kelapa sawit. Bentuknya sederhana dan biaya perawatan lebih murah. Permasalahan yang sering terjadi pada pompa sentrifugal adalah kerusakan pada bantalan poros yang diakibatkan oleh getaran, keausan, dan misalignment. Pada makalah ini membahas pengaruh tipe bantalan bola terhadap sinyal getaran poros pompa sentrifugal satu tingkat. Tujuan penelitian ini adalah mengetahui dan mendapatkan pengaruh tipe bantalan bola pada

APA, Harvard, Vancouver, ISO und andere Zitierweisen

16

Hasanov, F. Q., S. B. Bayramov, E. E. Abdullayev, and J. R. Damirova. "Socker-rod pumping unit with hydraulic transmission mechanism in the rod string." SOCAR Proceedings, SI (December 30, 2024): 9–16. http://dx.doi.org/10.5510/ogp2024si101006.

Der volle Inhalt der Quelle

Annotation:

In existing sucker-rod pumping units the lower end of the rod string which hanged from the wireline hanger is directly connected with the plunger of the well pump. So, the plunger of the well pump is moving up and down according to the movement of the hanger after the deformation is ended and then the fluid is raised to the surface from the formation. The wireline hanger is affected by the weights of the rod string, the lifted fluid column and the dynamic loads when it is in an upward movement. To reduce the loads on the wireline hanger and increase the operating efficiency of the pumping unit

APA, Harvard, Vancouver, ISO und andere Zitierweisen

17

Sumit, Deepali Gupta, Sapna Juneja, et al. "Energy Saving Implementation in Hydraulic Press Using Industrial Internet of Things (IIoT)." Electronics 11, no. 23 (2022): 4061. http://dx.doi.org/10.3390/electronics11234061.

Der volle Inhalt der Quelle

Annotation:

With the growing cost of electrical energy, the necessity of energy-saving implementation in industries based on energy audits has become a major focus area. Energy audit results indicate energy-saving potential in an application and require the physical presence of the auditor’s team for monitoring and analyzing the energy consumption data. The use of Industrial Internet of Things (IIoT) for remote data monitoring and analysis is growing and new industrial applications based on IIoT are being developed and used by various industrial sectors. Possibilities of a mixed method of physical and rem

APA, Harvard, Vancouver, ISO und andere Zitierweisen

18

Deng, Hong Chuan, Yu Zhang, and Hai Sheng Qian. "Kinematic Analysis of Swash Plate Axial Piston Pump Based on Adams Simulation." Applied Mechanics and Materials 741 (March 2015): 517–20. http://dx.doi.org/10.4028/www.scientific.net/amm.741.517.

Der volle Inhalt der Quelle

Annotation:

The swash plate axial piston pump is a main part in liquid press system.It is a positive displacement pump which rely on the change of the plunger cavity content to realize oil absorption or discharge of oil by the reciprocating movement of the plunger in the plunger cavity. Plunger, the slippery boots, oil pan, cylinder body are important parts of the swash plate axial piston pump. Sliding boots is one of commonly used by high-pressure plunger pump form, it can meet the needs of the high pressure high speed;the oil distribution plate and cylinder directly affect of the pump efficiency and lif

APA, Harvard, Vancouver, ISO und andere Zitierweisen

19

Sari, Ghulam Muhammad Abdu, and Rachmat Firdaus. "Analysis Hydraulic System of Injection Molding Machine." Procedia of Engineering and Life Science 7 (March 17, 2024): 563–70. http://dx.doi.org/10.21070/pels.v7i0.1529.

Der volle Inhalt der Quelle

Annotation:

The hydraulic system is a system that works using oil fluid pressure to become mechanical work. This research was conducted in order to obtain information related to the workings of the hydraulic system on the injection molding machine of PT. Mitra Mulia Makmur Sidoarjo. From data collection during industrial practices, the way the hydraulic system works is a tank that functions as a reservoir for oil before going to the hydraulic pump which is filtered first using an oil filter, the hydraulic pump acts as a converter of energy from the engine into pressurized energy by pressing hydraulic flui

APA, Harvard, Vancouver, ISO und andere Zitierweisen

20

Wang, Huijuan, Mengdie Xiang, Chuandong Xie, Yang Xu, and Han Luo. "Study on Calibration of Medical Analgesia Pump." Journal of Physics: Conference Series 2365, no. 1 (2022): 012015. http://dx.doi.org/10.1088/1742-6596/2365/1/012015.

Der volle Inhalt der Quelle

Annotation:

Abstract The medical analgesia pump is a liquid infusion device that can maintain a stable concentration of drugs in the blood and achieve better analgesic treatment with fewer drugs. It generally allows the patient to self-press to add an additional infusion based on the ongoing infusion, known as patient-controlled analgesia (PCA). It makes the treatment more individualized and consistent with the large variation in pain sensation. It is very important to the analgesic effect and medical safety whether the infusion of medical analgesia pump is accurate and the flow rate is stable. However, t

APA, Harvard, Vancouver, ISO und andere Zitierweisen

21

Anatoliy, Girshfeld, and Simson Eduard. "Development and optimization of technology and modernization of forging line for bearing rings." Technology audit and production reserves 4, no. 1(48) (2019): 52–61. https://doi.org/10.15587/2312-8372.2019.198354.

Der volle Inhalt der Quelle

Annotation:

<em>The object of research is the forging line L-408 (Ukraine) for the production of workpieces for rings of railway bearings. This line is installed at Kharkiv Bearing Plant (JSC HARP, Ukraine) and consists of a KIN 750 induction heating section, a P-2038A hydraulic three-position press and a KPS 250 ring-rolling unit. Based on the results of the technical audit of the line, it is revealed that the KIN 750 is produced on an outdated hardware base and has a deliberately lower efficiency. In addition, the lack of control over power and frequency during the heating process does not make it possi

APA, Harvard, Vancouver, ISO und andere Zitierweisen

22

F. Bairamov, Bulat, Artur A. Fardeev, and Albert R. Fardeev. "Mathematical Model of the Controlled Object when Regulating the Working Volume of the Manipulator Pump." International Journal of Engineering & Technology 7, no. 4.36 (2018): 1058. http://dx.doi.org/10.14419/ijet.v7i4.36.24953.

Der volle Inhalt der Quelle

Annotation:

This paper describes the constructed mathematical model of the controlled object of the automated system for controlling the displacement volume of the manipulator pump. The change in pump displacement volume is performed in order to save energy by minimizing the fluid drain through the overflow valve. The use of the considered manipulator is intended in the process of automated supply of blanks to the working area of a press used in forging and hot stamping processes. The reactive forces acting on the moving parts of the mobility modules from the fixed parts of the manipulator are determined.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

23

Nguyen, Minh Nam, Thi Chien Truong, Thi Minh Tam Bui, Dang Bac Nguyen, Tien Khuong Nguyen, and Thi Luot Tien. "The influence of some technological parameters in the processingof protein-rich powder from Sacha inchi oil pressed-cake." Ministry of Science and Technology, Vietnam 64, no. 10 (2022): 63–67. http://dx.doi.org/10.31276/vjst.64(10db).63-67.

Der volle Inhalt der Quelle

Annotation:

Sacha inchi (Plukenetia Volubilis L.) was originally cultivated in Amazon rainforest in Peru. Sacha inchi seeds have high nutritional value (oil 35-40%, protein 25-30%...) [1], therefore, they are considered a “superfood”. Sacha inchi oil contains unsaturated fatty acids (omega 3, 6, 9) that humans cannot synthesise on their own. However, the Sacha inchi oil extraction process produces a large number of by-products (70% of the nut shells and oil press-cake) that are either discarded as waste or used as animal feed. To evaluate the potential and increase the use value of this protein-rich by-pr

APA, Harvard, Vancouver, ISO und andere Zitierweisen

24

Velikanov, N. L., and V. A. Naumov. "Modeling of Characteristics of Water-Ring Vacuum Pumps." Proceedings of Higher Educational Institutions. Маchine Building, no. 10 (715) (October 2019): 70–77. http://dx.doi.org/10.18698/0536-1044-2019-10-70-77.

Der volle Inhalt der Quelle

Annotation:

Physical and mathematical modeling of characteristics of water-ring vacuum pumps has a number of specific features. Isothermal efficiency, i.e. the ratio of the isothermal gas compression power to the pump power consumed is used as an efficiency indicator. The article describes the existing methods of hydraulic calculation of pumping units. An analysis of physical models, numerical values of empirical coefficients is carried out. An improved algorithm for calculating water-ring vacuum pumps of different manufacturers in the framework of previously developed models is presented. The calculation

APA, Harvard, Vancouver, ISO und andere Zitierweisen

25

Chen, Changzhong, and Qiang Jia. "Study on engineering process and equipment operation of total treatment project of leachate and concentrated solution." Journal of Physics: Conference Series 2206, no. 1 (2022): 012023. http://dx.doi.org/10.1088/1742-6596/2206/1/012023.

Der volle Inhalt der Quelle

Annotation:

Abstract The accumulation of a large amount of leachate and concentrated liquid caused by MSW is a serious potential safety hazard and environmental hazard. A full treatment project of leachate and concentrate were performed, with treatment capacity of leachate 1100 t/d and concentrate 550 t/d. The leachate treatment process adopts “pretreatment + second-stage A/O biochemistry + ultrafiltration + chemical softening + second-stage DTRO+HPRO+RO+ ion exchange”. The main processing equipment is jet aerator, submersible mixer, centrifugal pump, ultrafiltration membrane assembly, softening membrane

APA, Harvard, Vancouver, ISO und andere Zitierweisen

26

Gumilang, Theo Satria, Radhian Krisnaputra, Sugiyanto Sugiyanto, Ignatius Aris Hendaryanto, Inggar Septhia Irawati, and Galuh Bahari. "PERANCANGAN SISTEM HIDROLIK PADA MESIN PRESS BAMBU LAMINASI." Jurnal Rekayasa Mesin 14, no. 3 (2023): 963–78. http://dx.doi.org/10.21776/jrm.v14i3.1484.

Der volle Inhalt der Quelle

Annotation:

The hydraulic system is a power transmission system by using the compressive energy of the fluid into mechanical energy to obtain a power greater than the initial power released. The press machine is one of the pieces of equipment that apply the hydraulic system. In the process of making laminated bamboo, the bamboo gluing technique is assisted using a press machine. Based on observations, the press machine used is a manual press machine, so the pressing process is not efficient. This study aims to increase the effectiveness of pressing laminated bamboo. The results of the study found that the

APA, Harvard, Vancouver, ISO und andere Zitierweisen

27

Cao, Xiaoming, Jing Yao, Tong Sha, and Yu Song. "Pressure-Relief Impact Control of Open Circuit Hydraulic Pump-Controlled Forging Press System." Processes 7, no. 9 (2019): 638. http://dx.doi.org/10.3390/pr7090638.

Der volle Inhalt der Quelle

Annotation:

Taking the open circuit hydraulic pump-controlled forging press system as the research object, according to the problems of pressure-relief impact of this system, the pressure-relief rules, mathematic models of the energy release rules, and the flow release rules were established, and the pressure-relief performance in different stages of each pressure-relief curve was analyzed. Based on the different requirements of the pressure gradient decrease, the combined pressure-relief curve (CPRC) was proposed to realize variable-pump eccentric magnitude planning. An experimental study on the pressure

APA, Harvard, Vancouver, ISO und andere Zitierweisen

28

ALEMDAROGLU, UFUK, ZEYNEP GULER, FIKRET DALKIRAN, and GARIP GENC. "AN INDUSTRIAL APPLICATION: IMPROVING PERFORMANCE OF AN OLD FORGING PRESS." MM Science Journal 2022, no. 3 (2022): 5764–67. http://dx.doi.org/10.17973/mmsj.2022_10_2022072.

Der volle Inhalt der Quelle

Annotation:

Forging is one of the most important production methods in applications where the disadvantages of machining are not desired. However, the possibility of micro-cracking in the material at the end of the forging process should be considered. The main constraints here are the aging of hydraulic systems and possible casting defects. Therefore, in this study, the modernized process of an old forging press with a capacity of 30000 kN was carried out. For this purpose, the capacity of the forging press has been increased by modifying a new generation pump and hydraulic accumulator group. Thus, by in

APA, Harvard, Vancouver, ISO und andere Zitierweisen

29

Grafius, E., B. Bishop, P. Henry, M. Quentin, M. Stehr, and R. Maier. "Onion Maggot Control, 1989." Insecticide and Acaricide Tests 15, no. 1 (1990): 120. http://dx.doi.org/10.1093/iat/15.1.120.

Der volle Inhalt der Quelle

Annotation:

Abstract Onions (‘Spartan Banner 80’, thiram-treated seed) were seeded on 21 Apr 1989 at Dyk Brothers’ farm near Grant, MI. Plots were double rows, 20 ft long with 4 inches between rows within a plot, and 18 inches between plots. Treatments were arranged in a randomized complete block design with 4 replicates. Granular materials were applied in the furrow with the seed using a v-belt planter. Liquid materials were applied at planting directly into the furrow using a hand-pump sprayer (20 psi, 50 gal/acre) with the nozzle behind the shoe of the planter, but in front of the seed and the press wh

APA, Harvard, Vancouver, ISO und andere Zitierweisen

30

Zhang, Yuan, Qiang Liu, Guang Han, and Jian Wang. "Simulation and Analysis of Water Pump Bearing Assembly Based on ANSYS." Applied Mechanics and Materials 487 (January 2014): 455–59. http://dx.doi.org/10.4028/www.scientific.net/amm.487.455.

Der volle Inhalt der Quelle

Annotation:

Finite element analysis has been done to analyze pump bearing assembly in interference assembly condition by ANSYS software. The press-in assembly environment has been simulated, and the maximum stress and maximum deformation of inner race have been analyzed. Studies show that with the increase of bearing size, the change law of maximum stress and maximum deformation does not single unidirectionally increase or decrease simply. At the same time, the interference value also influences the change law. So, in the bearing assembly tolerance selection the influence of the interference must be consi

APA, Harvard, Vancouver, ISO und andere Zitierweisen

31

Zhang, Yi Gong, Hong Hong Yan, Zhi Qi Liu, Jian Li Song, and Yong Tang Li. "Modal Analysis on the Inclined Double-Column and Pre-Stress Combined Frame Structure of the 80MN Rapid Forging Hydraulic Press." Advanced Materials Research 317-319 (August 2011): 484–88. http://dx.doi.org/10.4028/www.scientific.net/amr.317-319.484.

Der volle Inhalt der Quelle

Annotation:

In this paper, the first 80MN rapid forging hydraulic press in China was developed. The inclined double-column and pre-stress combined frame structure and the direct Pump-driven technologies were adopted for the first time in the design of this press. The linkage driving with the full-hydraulic orbital manipulator has been realized. A rapid forging frequency of 75~80 /min and a finishing precision of ±1mm for hot-state forgings can be obtained. The three dimensional full-contact solid model of the double-column combined frame structure of the 80 MN rapid forging hydraulic press has been set up

APA, Harvard, Vancouver, ISO und andere Zitierweisen

32

Putri, Lely Erica, Muhammad Ridha Mak'ruf, and Abd. Kholiq. "Syringe Pump With Nearly Empty Based Microcontroller Atmega328." Journal of Electronics, Electromedical Engineering, and Medical Informatics 1, no. 2 (2019): 25–30. http://dx.doi.org/10.35882/jeeemi.v1i2.5.

Der volle Inhalt der Quelle

Annotation:

Syringe Pump is a tool used to give liquid medicine or food liquid into the patient's body in a certain amount and within a certain period of time on a regular basis. The purpose of this study is to facilitate monitoring of fluid in the syringe so that the hose is not installed continuously when the liquid has run out. The circuit consists of an Atmega328 microcontroller, a motor driver, and an optocoupler sensor. Setting the syringe, volume and flowrate is done at the beginning. To insert liquid, the motor must be run by the way the settings have been done and press the start button. Tools ne

APA, Harvard, Vancouver, ISO und andere Zitierweisen

33

Vontas Alfenny Nahan, Topan Eka Putra, and Revianti Coenraad. "OPTIMIZATION MODEL FOR USING WATER FLOW IN HYDRAM PUMP STORAGE BARRELS AS A SOURCE OF SUSTAINABLE ELECTRICITY GENERATION ON A LABORATORY SCALE." BALANGA: Jurnal Pendidikan Teknologi dan Kejuruan 11, no. 2 (2023): 149–56. http://dx.doi.org/10.37304/balanga.v11i2.11742.

Der volle Inhalt der Quelle

Annotation:

Currently, energy needs are increasing greatly, this is influenced by increasing population growth and human activity. The development of simpler renewable energy must be encouraged to meet energy needs, at least to meet the domestic energy needs of households. A hydram pump is a tool that can utilize water flow to produce kinetic energy which is then converted into potential energy to lift water to a certain height. This potential energy can be converted into electrical energy through a generator. A hydram pump is a tool used to raise water from a low place to a higher place automatically wit

APA, Harvard, Vancouver, ISO und andere Zitierweisen

34

Yan, Xiaopeng, Songlin Nie, Hui Ji, Zhonghai Ma, and Baijin Chen. "A Novel Energy-Efficient Transmission System and Control Strategy for Hydraulic Machines." International Journal of Energy Research 2023 (February 9, 2023): 1–15. http://dx.doi.org/10.1155/2023/6275886.

Der volle Inhalt der Quelle

Annotation:

Each part of a hydraulic press dissipates a large amount of energy when energy or power is transmitted. Therefore, this study proposes a 3-D vertical arrangement structure for the hydraulic press to reduce their energy dissipation. In the proposed structure, the aboveground and underground spaces are comprehensively utilized, and then the hydraulic equipment are arranged three-dimensionally and set in layers according to the functional requirements. Some equipment is connected directly to minimize the use of valves and pipelines and reduce the transmission distance of hydraulic energy between

APA, Harvard, Vancouver, ISO und andere Zitierweisen

35

Novaković, Borivoj, Ljiljana Radovanović, Ninoslav Zuber, Dragica Radosav, Luka Đorđević, and Mila Kavalić. "Analysis of the influence of hydraulic fluid quality on external gear pump performance." Eksploatacja i Niezawodnosc - Maintenance and Reliability 24, no. 2 (2022): 260–68. http://dx.doi.org/10.17531/ein.2022.2.7.

Der volle Inhalt der Quelle

Annotation:

The basis of every hydraulic system is based on energy transformations, which are realized through hydraulic working fluid. Hydraulic oils are certainly subject to changes within their structure, meaning the basic characteristics and parameters of hydraulic oil, such as density, viscosity, humidity. The oils that are exploited are exposed to the process of degradation, which largely leads to significantly poorer quality of hydraulic fluid. The paper deals with the influence of changes in the characteristics of the hydraulic fluid on the hydraulic operating parameters of the gear pump installed

APA, Harvard, Vancouver, ISO und andere Zitierweisen

36

Jiang, Zhu, Haiying Li, Guangtai Shi, and Xiaobing Liu. "Flow Characteristics and Energy Loss within the Static Impeller of Multiphase Pump." Processes 9, no. 6 (2021): 1025. http://dx.doi.org/10.3390/pr9061025.

Der volle Inhalt der Quelle

Annotation:

The internal flow is very complex in the multiphase pump, especially in the static impeller, where the flow is more disorganized than that in the impeller wheel, and it will cause greater hydraulic losses. In order to investigate deeply the flow rules within the static impeller, all kinds of the flow losses are analyzed quantificationally in the multiphase pump. Based on the standard SST k-ω turbulence model, selected the helical axial flow multiphase pump as the research object, used the three-dimensional modeling software for the three-dimensional modeling of the flow through parts of the mu

APA, Harvard, Vancouver, ISO und andere Zitierweisen

37

Kurniawan, Erry Dwi, Alwin Adam, Muhammad Ichlasul Salik, and Paulus Lobo Gareso. "Programmable Syringe Pump for Selective Micro Droplet Deposition." Jurnal Elektronika dan Telekomunikasi 19, no. 2 (2019): 75. http://dx.doi.org/10.14203/jet.v19.75-82.

Der volle Inhalt der Quelle

Annotation:

Micro/nanopatterns with micro deposition techniques have been used in various applications such as flexible electronic devices, biosensing, and biological tissue engineering. For depositing a small size of droplets that can be controlled, structured and patterned precisely is a very important process for microfabrication. In this study, we developed a low cost and simple system for fabricating micro/nanostructure by a selective micro deposition process using a syringe pump. This method is an additive fabrication method where selective droplet materials are released through a needle of the syri

APA, Harvard, Vancouver, ISO und andere Zitierweisen

38

Li, Rong. "Design and Research of Hydraulic Station of Hydraulic Tire Curing Press." Advanced Materials Research 507 (April 2012): 172–75. http://dx.doi.org/10.4028/www.scientific.net/amr.507.172.

Der volle Inhalt der Quelle

Annotation:

Analyzes the change of hydraulic pressure and flow rate during the opening/closing and curing processes in the hydraulic system of hydraulic tire curing machine and proposes a new design of the hydraulic station. By using three groups of motors-variable piston pump to work independently, the new hydraulic station can reduce machine downtime. Through using accumulator to keep pressure and delaying switching time of the valve to gradually release pressure, the new hydraulic station solves the problem of the severe impact caused by pressure relief and improve the safety and relia-bility.

APA, Harvard, Vancouver, ISO und andere Zitierweisen

39

Huang, Jun, Duc Truong Pham, Yongjing Wang, et al. "A case study in human–robot collaboration in the disassembly of press-fitted components." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 234, no. 3 (2019): 654–64. http://dx.doi.org/10.1177/0954405419883060.

Der volle Inhalt der Quelle

Annotation:

Human–robot collaborative disassembly is an approach designed to mitigate the effects of uncertainties associated with the condition of end-of-life products returned for remanufacturing. This flexible semi-autonomous approach can also handle unpredictability in the frequency and numbers of such returns as well as variance in the remanufacturing process. This article focusses on disassembly, which is the first and arguably the most critical step in remanufacturing. The article presents a new method for disassembling press-fitted components using human–robot collaboration based on the active com

APA, Harvard, Vancouver, ISO und andere Zitierweisen

40

Ghitza, Udi E., Anthony T. Fabbricatore, Volodymyr F. Prokopenko, and Mark O. West. "Differences Between Accumbens Core and Shell Neurons Exhibiting Phasic Firing Patterns Related to Drug-Seeking Behavior During a Discriminative-Stimulus Task." Journal of Neurophysiology 92, no. 3 (2004): 1608–14. http://dx.doi.org/10.1152/jn.00268.2004.

Der volle Inhalt der Quelle

Annotation:

The habit-forming effects of abused drugs depend on the mesocorticolimbic dopamine system innervating the nucleus accumbens (NAcc). To examine whether different NAcc subterritories (core and medial shell) exhibit a differential distribution of neurons showing phasic firing patterns correlated with drug-seeking behavior, rats were trained to self-administer cocaine, and activity of single NAcc neurons was recorded. In the presence of a discriminative-stimulus (SD) tone, a single lever press produced an intravenous infusion of cocaine (0.35 mg/kg), terminated the tone, and started an intertone i

APA, Harvard, Vancouver, ISO und andere Zitierweisen

41

Mustholiq, Mustholiq, Fitri Kensiwi, and Wisnu Ageng Pangestu. "Identify of The Dropping in Hydrophore Tank Pump Pressure At Mt. Inter Armada 01." RSF Conference Series: Engineering and Technology 3, no. 1 (2023): 266–72. http://dx.doi.org/10.31098/cset.v3i1.759.

Der volle Inhalt der Quelle

Annotation:

A hydrophore tank or water pressure tank is a tank that stores water temporarily and then separates water and air through a membrane so that the air in it is compressed. The water in the tank is flowed into a distribution building. The pump works automatically, regulated by a pressure detector, which closes/opens the electric motor's switch driving pump. The pump stops working when the pressure in the tank reaches a specified minimum. In this system, the compressed air will press water into the distribution system. After repeatedly expanding and compressing over time, it will decrease because

APA, Harvard, Vancouver, ISO und andere Zitierweisen

42

Baum, Louis. "Changing days at the parish pump: The book trade press in the digital era." Logos 11, no. 3 (2000): 134–38. http://dx.doi.org/10.2959/logo.2000.11.3.134.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

43

Hendrawan, Andi, Siswadi Siswadi, Supari Supari, and Ragil Ajun Abdilah Al Khomsi. "Penyebab Kerusakan Electro Motor Oil Max Pump pada Mesin Induk di KM. Dharma Kartika IX." Saintara : Jurnal Ilmiah Ilmu-Ilmu Maritim 5, no. 2 (2021): 28–35. http://dx.doi.org/10.52488/saintara.v5i2.104.

Der volle Inhalt der Quelle

Annotation:

Penggunaan pompa sebagian besar sebagai penggerak, conveyor, mesin press, elevator dan lainnya. Motor induksi yang paling banyak dipergunakan karena mesin induksi kuat, kokok dan mudah perawatannya serta efisiensi pada daya cukup tinggi. Permasalahan yang sering terjadi pada setiap electro motor adalah kerusakan mekanis seperti over-current (arus lebih), mechanical failure (kerusakan mekanis), tahanan isolasi yang rendah, pelumasan yang kurang, getaran berlebih, misalignment, umur motor dan faktor lain dalam operasi motor induksi, Data diperoleh melalui peneltian field research observasi langs

APA, Harvard, Vancouver, ISO und andere Zitierweisen

44

Wang, Wei, Xiao Wei Liu, Shan Shan Chen, Xin Wang, Shao Feng Li, and Yun Sen Wu. "Research on the Characteristics of Orifice Flow on Microfluidic Chips." Advanced Materials Research 317-319 (August 2011): 1621–26. http://dx.doi.org/10.4028/www.scientific.net/amr.317-319.1621.

Der volle Inhalt der Quelle

Annotation:

The orifice which formed by the sudden change of channel’s scale on microfluidic chip and its application have introduced in this paper. The characteristics of orifice flow on microfluidic chip are studied by μ-PIV technology. The experimental PDMS chip is fabricated by hot press molding. The transient flow field experiment is carried out on the μ-PIV platform. The flow of thin-walled/thick-walled orifice was measured in experiment. There is flow constriction of orifice flow in jet state; the flow constriction of thick-walled orifice can pump the liquid in channel; and the critical Reynolds nu

APA, Harvard, Vancouver, ISO und andere Zitierweisen

45

Wei, Jie, and Chun Yang Shan. "The Analysis for the Leaking Flowrate in the Plane Valveplate." Applied Mechanics and Materials 610 (August 2014): 46–51. http://dx.doi.org/10.4028/www.scientific.net/amm.610.46.

Der volle Inhalt der Quelle

Annotation:

A new computation for the leaking flowrate in the plane valveplate sector of the pistons pump considering the influence of the flow inertia is proposed. Establish the theoretical math model about the flow field, based in the N-S equation and the sequence equation, and the leaking flowrate in the plane valveplate sector considering the influence of the flow inertia is computed in the boundary conditions of the press and the velocity. It is not the same as the common formula that the leaking flowrate computation formula established in this paper includes the factor of the flow inertia in the pla

APA, Harvard, Vancouver, ISO und andere Zitierweisen

46

Golubeva, Olesya, Alina Pogorelova, and Viktor Mirniy. "High - speed power hydraulic actuator of reciprocating motion." E3S Web of Conferences 376 (2023): 01057. http://dx.doi.org/10.1051/e3sconf/202337601057.

Der volle Inhalt der Quelle

Annotation:

As an object of research in this paper, we use a hydro-mechanical system of high-speed technological equipment with reciprocating movement of the output link on the example of a cyclic perforating press hammer with a force of 1600 kN and a speed of up to 75 working strokes of the slider per minute. The theoretical analysis of the operation of a high-speed hydraulic reciprocating drive for a cyclic press made using a pump-accumulator power source containing one hydraulic accumulator showed that increasing its speed is technically possible, but not economically justified. Additional calculations

APA, Harvard, Vancouver, ISO und andere Zitierweisen

47

Xu, Zhicheng, Yanxiong Liu, Lin Hua, Xinhao Zhao, and Xiaokai Wang. "Energy improvement of fineblanking press by valve-pump combined controlled hydraulic system with multiple accumulators." Journal of Cleaner Production 257 (June 2020): 120505. http://dx.doi.org/10.1016/j.jclepro.2020.120505.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

48

Tiboni, Monica. "Power Drive Architectures for Industrial Hydraulic Axes: Energy-Efficiency-Based Comparative Analysis." Applied Sciences 13, no. 18 (2023): 10066. http://dx.doi.org/10.3390/app131810066.

Der volle Inhalt der Quelle

Annotation:

In hydraulic systems, energy dissipation can be significant. The pressure losses that can occur in the hydraulic circuit, which are influenced by the adopted drive architecture, result in power consumption that is often significantly higher than that required by the mechanical system. This paper presents a comparative study of the energy efficiency of five common drive architectures in industrial hydraulic axes. The analysis is applied to a variable speed and force hydraulic blanking press, a fairly common industrial system, e.g., in the manufacture of semi-finished brass products. Standard, r

APA, Harvard, Vancouver, ISO und andere Zitierweisen

49

Kakimov, M. M., S. D. Tokayev, M. T. Mursalykova, B. M. Iskakov, and A. M. Musina. "USING THE SECONDARY RAW MATERIALS OF GRAIN PROCESSING AND OIL SEED RECYCLING AIM TO INCREASE OIL REFINEMENT EFFICIENCY." Bulletin of Shakarim University. Technical Sciences 1, no. 4(16) (2024): 269–78. https://doi.org/10.53360/2788-7995-2024-4(16)-35.

Der volle Inhalt der Quelle

Annotation:

In the article the expert analytical review of literature sources on the basis of set tasks on realization of the purpose of increasing the efficiency of safflower oil purification using secondary raw materials of grain and oilseed crops processing is carried out, the object of research and the purpose of technology of effective purification of safflower oil are defined. Methods of using secondary raw materials as filtering materials were analyzed, linen fiber is proposed as an optimal filtering material. Multifactorial experimental studies were carried out for the application of filtering mat

APA, Harvard, Vancouver, ISO und andere Zitierweisen

50

Besley, Jo, Louise Denoon, and Katie McConnel. "Past and Present Collide: Bringing Together the Museum of Brisbane's Exhibition Taking to the Streets: Two Decades That Changed Brisbane, 1965–1985." Queensland Review 14, no. 01 (2007): 1–10. http://dx.doi.org/10.1017/s1321816600005845.

Der volle Inhalt der Quelle

Annotation:

On 23 January 2006, the US Navy's biggest military vessel, the nuclear powered USS Ronald Reagan, arrived in Brisbane for a five-day visit. With estimates that the 6,000 strong crew would pump around $5 million into the local economy, the media, businesses and politicians welcomed the visit as a fabulous opportunity for the city. The Brisbane Peace Convergence, a coalition of local peace groups, disagreed and attempted a water-borne protest. The police intercepted the flotilla of kayaks and rowboats before they even got close to the USS Ronald Reagan because the entire Brisbane River had been

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!