Einloggen

Thematische Bibliographien / Systems adhesives / Dissertationen

Um die anderen Arten von Veröffentlichungen zu diesem Thema anzuzeigen, folgen Sie diesem Link: Systems adhesives.

Dissertationen zum Thema „Systems adhesives“

Autor: Grafiati

Veröffentlicht am 8. September 2021

Zuletzt aktualisiert am 29. Juli 2025

Geben Sie eine Quelle nach APA, MLA, Chicago, Harvard und anderen Zitierweisen an

Wählen Sie eine Art der Quelle aus:

Machen Sie sich mit Top-50 Dissertationen für die Forschung zum Thema "Systems adhesives" bekannt.

Neben jedem Werk im Literaturverzeichnis ist die Option "Zur Bibliographie hinzufügen" verfügbar. Nutzen Sie sie, wird Ihre bibliographische Angabe des gewählten Werkes nach der nötigen Zitierweise (APA, MLA, Harvard, Chicago, Vancouver usw.) automatisch gestaltet.

Sie können auch den vollen Text der wissenschaftlichen Publikation im PDF-Format herunterladen und eine Online-Annotation der Arbeit lesen, wenn die relevanten Parameter in den Metadaten verfügbar sind.

Sehen Sie die Dissertationen für verschiedene Spezialgebieten durch und erstellen Sie Ihre Bibliographie auf korrekte Weise.

1

Shean, Tamaryn Anne Vaughan. "Small-scale mechanical characterization of viscoelastic adhesive systems." Thesis, University of Cambridge, 2012. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.610430.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

2

Winbow, Howard David. "The chemistry and properties of magnesia-phosphate cement systems." Thesis, University of Sheffield, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.249651.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

3

Phanopoulos, C. "The nature of bond formation and failure in wood-adhesive systems." Thesis, De Montfort University, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.374074.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

4

Klug, Jeremy Hager. "High-performance adhesive systems for polymer composite bonding applications /." Thesis, Connect to this title online; UW restricted, 1999. http://hdl.handle.net/1773/9883.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

5

Acurio-Benavente, Mariana, Haru Kinoshita-Rivas, Paloma Acurio-Benavente, and Leslie Casas-Apayco. "In vitro comparison of the immediate adhesive strength in dentin of three universal adhesive systems." Universidad de Concepción, 2018. http://hdl.handle.net/10757/624652.

Der volle Inhalt der Quelle

Annotation:

Objective: To compare the adhesive strength in dentin of three universal adhesive systems in vitro by means of the shear test. Materials and methods: Seventy-five bovine teeth were selected and cut. Dentin was exposed from the buccal surface of the crowns with 220 grit sandpaper, and samples were then inserted in transparent acrylic bases (15x10mm). The samples were randomly divided in 3 groups (n=25): G1-Universal adhesive system Scotchbond™ Universal (3M ESPE-USA); G2-Universal adhesive system Peak Universal Bond (Ultradent); G3-Universal adhesive system Tetric N-Bond (Ivoclar Vivadent). The

APA, Harvard, Vancouver, ISO und andere Zitierweisen

6

Schenzel, Alexander Marc [Verfasser], and C. [Akademischer Betreuer] Barner-Kowollik. "Advanced Debonding on Demand Systems for Dental Adhesives / Alexander Marc Schenzel ; Betreuer: C. Barner-Kowollik." Karlsruhe : KIT-Bibliothek, 2017. http://d-nb.info/113299733X/34.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

7

Guimarães, Isadora Rabêlo 1985. "Interaction effect between multi-mode adhesive systems and dual/chemical curing resin cements on dentin bonding = O efeito da interação de sistemas adesivos multi-mode e cimentos resinosos de polimerização química e dual na adesão à dentina." [s.n.], 2015. http://repositorio.unicamp.br/jspui/handle/REPOSIP/288149.

Der volle Inhalt der Quelle

Annotation:

Orientador: Mario Fernando de Goes<br>Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba<br>Made available in DSpace on 2018-08-27T03:34:21Z (GMT). No. of bitstreams: 1 Guimaraes_IsadoraRabelo_D.pdf: 1408417 bytes, checksum: 663b3f486f91d8f3589f07a988f8ba2c (MD5) Previous issue date: 2015<br>Resumo: O objetivo deste estudo foi avaliar o efeito da interação de sistemas adesivos multi-mode e cimentos resinosos de polimerização química e dual sobre a superfície da dentina. Quarenta terceiros molares humanos não cariados foram separados em 5 grupos (n=8)

APA, Harvard, Vancouver, ISO und andere Zitierweisen

8

Chan, Philip Shiu-Kin. "Shear and extensional deformation of water-based biopolymer systems and correlations with industrial performance of labelling adhesives." Thesis, University of Leeds, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.521020.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

9

Brandt, Paul Dieter. "Shear bond strength, microleakage and anti-bacterial properties of self-etching bonding systems." Diss., Pretoria : [s.n.], 2009. http://upetd.up.ac.za/thesis/available/etd-02182010-110040/.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

10

Baric, Marina. "The effects of accelerated aging on optical components : Application to vehicle camera systems." Thesis, Linköpings universitet, Institutionen för fysik, kemi och biologi, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-159828.

Der volle Inhalt der Quelle

Annotation:

Companies providing products have many requirements, both from standards and customers, that they need to comply with in order to be able to sell their product. Veoneer AB is a leading automotive machine vision supplier, providing mono, stereo, night vision and driver monitoring systems consisting of both electronic, mechanical and optical components. These systems have to withstand certain environmental tests in order to assure the lifetime of the totalsystems. Since the life time is usually several years accelerated tests are used that correspond to a few weeks ormonths. The tests used at Ve

APA, Harvard, Vancouver, ISO und andere Zitierweisen

11

Bouvier, Amy. "Fluoride release, recharge, and re-release from four orthodontic bonding systems." Thesis, NSUWorks, 2012. https://nsuworks.nova.edu/hpd_cdm_stuetd/55.

Der volle Inhalt der Quelle

Annotation:

A thesis submitted to the College of Dental Medicine of Nova Southeastern University of the degree of Master of Science in Dentistry. Objectives: To determine the amount of initial fluoride release from four orthodontic bonding systems over a period of four weeks, and then to subject these materials to an external source of fluoride for recharge in order to measure the amount of fluoride re-release over another four-week interval. Additionally the surface morphology of these materials was analyzed under the scanning electron microscope in order to identify microscopic changes in the materials

APA, Harvard, Vancouver, ISO und andere Zitierweisen

12

Malaquias, Pamela. "AVALIAÇÃO DA INCORPORAÇÃO DE CLOREXIDINA EM SISTEMAS ADESIVOS NA LIBERAÇÃO E SEUS EFEITOS NA LONGEVIDADE DA INTERFACE DE UNIÃO À DENTINA." UNIVERSIDADE ESTADUAL DE PONTA GROSSA, 2016. http://tede2.uepg.br/jspui/handle/prefix/1718.

Der volle Inhalt der Quelle

Annotation:

Made available in DSpace on 2017-07-24T19:22:03Z (GMT). No. of bitstreams: 1 PAMELA MALAQUIAS.pdf: 1459467 bytes, checksum: dad45846f48d6409e23619b883575953 (MD5) Previous issue date: 2016-02-23<br>The aim of the study was to evaluate the effects of adding chlorhexidine diacetate (CHX), in two different simplified adhesive systems on the chlorhexidine release (CHXR), bond strength (μTBS) and nanoleakage (NL). The CHX was added to adhesive systems XP Bond [XP] (Dentsply, York, PA, USA) and Ambar [AM] (Prod Odont Ltda FGM, Joinville, Brazil) at concentrations of 0 (control); 0.01; 0.05; 0.1 to

APA, Harvard, Vancouver, ISO und andere Zitierweisen

13

Talungchit, Supitcha. "Enhancing resin-dentin bond effectiveness and durability: the role of ethanol-wet bonding technique, MMP-inhibition (chlorhexidine), and photoinitiator systems." Diss., University of Iowa, 2012. https://ir.uiowa.edu/etd/2996.

Der volle Inhalt der Quelle

Annotation:

Current hydrophilic resin adhesives undergo hydrolytic degradation and show a decrease in bond strength over time. Nanoleakage and ultrastructure studies suggest that inadequately infiltrated collagen leads to enzymatic degradation and resin-dentin bond failure. Adequate degree of conversion (DC) of resin adhesives is also critical to resin-dentin bond strength and durability. The long-term goal of this dissertation is the realization of durable resin-dentin bond. It is hypothesized that ethanol-wet bonding tec

APA, Harvard, Vancouver, ISO und andere Zitierweisen

14

Ramirez, Cristiaann Hincapie. "Avaliação pelo sistema de tomografia por coerência óptica do efeito do envelhecimento por ciclagem térmica na adaptação marginal das restaurações adesivas em cavidades classe II em dentina e esmalte dental." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/85/85134/tde-16012017-143839/.

Der volle Inhalt der Quelle

Annotation:

Este estudo teve como objetivo avaliar a adaptação marginal em restaurações classe II em dentina e esmalte dental utilizando um sistema adesivo universal de acordo com três técnicas diferentes de aplicação: Autocondicionante, condicionamento seletivo e condicionamento total, através do sistema de tomografia por coerência óptica (OCT), antes e após ao envelhecimento por termociclagem (TC). Preparos classe II foram confeccionados nas paredes mesial e distal, em 30 molares hígidos humanos, com término da cavidade em esmalte e em dentina. Todos os espécimenes foram restaurados (adesivo Single Bond

APA, Harvard, Vancouver, ISO und andere Zitierweisen

15

Theobaldo, Jéssica Dias 1989. "Efeito da fumaça de cigarro nas propriedades físicas e químicas do esmalte e dentina e na resistência de união à resina composta utilizando diferentes sistemas adesivos = Effect of cigarette smoke on the physical and chemical properties of the enamel and dentin and bond strength to resin composite using different adhesive systems." [s.n.], 2015. http://repositorio.unicamp.br/jspui/handle/REPOSIP/288865.

Der volle Inhalt der Quelle

Annotation:

Orientador: Flávio Henrique Baggio Aguiar<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba<br>Made available in DSpace on 2018-08-27T02:52:29Z (GMT). No. of bitstreams: 1 Theobaldo_JessicaDias_M.pdf: 1963787 bytes, checksum: cb1d935e6d8c39551ed0eb14ebf3065f (MD5) Previous issue date: 2015<br>Resumo: Este estudo avaliou o efeito da fumaça do cigarro nas propriedades físico-químicas da estrutura dental e na resistência de união à resina composta utilizando diferentes sistemas adesivos, em dois estudos. O objetivo do Estudo 1 foi avaliar a in

APA, Harvard, Vancouver, ISO und andere Zitierweisen

16

Sene, Fabio. "Análise da qualidade da interface adesiva dentinária produzida por diferentes sistemas adesivos, aplicados \'in vivo\' e \'in vitro\'." Universidade de São Paulo, 2004. http://www.teses.usp.br/teses/disponiveis/25/25131/tde-21082009-111925/.

Der volle Inhalt der Quelle

Annotation:

O objetivo deste trabalho foi analisar em Microscopia Ótica (MO), Espectroscopia micro-Raman (µR) e Microscopia Eletrônica de Varredura (MEV), a interface adesiva em dentina proporcionada por três sistemas adesivos aplicados in vivo e in vitro. Na condição in vivo, pacientes com primeiros prémolares superiores hígidos indicados para extração, por razões ortodônticas, foram utilizados. Cavidades classe I com 0,5mm além da junção esmalte-dentina foram realizadas, nos dentes, com broca carbide 245 em alta rotação. Foram, então aplicados três sistemas adesivos diferentes foram aplicados, de acordo

APA, Harvard, Vancouver, ISO und andere Zitierweisen

17

Freitas, Marcela Santiago 1987. "Effect of pre-etching to enamel and dentin on bond strength and interfacial morphology of different adhesives systems = Efeito do pré-condicionamento ácido do esmalte da dentina na resistência de união e morfologia de interface de diferentes sistemas adesivos." [s.n.], 2013. http://repositorio.unicamp.br/jspui/handle/REPOSIP/288307.

Der volle Inhalt der Quelle

Annotation:

Orientadores: Mirela Sanae Shinohara, Mário Fernando de Góes<br>Dissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Odontologia de Piracicaba<br>Made available in DSpace on 2018-08-21T23:51:52Z (GMT). No. of bitstreams: 1 Freitas_MarcelaSantiago_M.pdf: 38797129 bytes, checksum: 16869befa66eba198d1cb13ad5c9ac1d (MD5) Previous issue date: 2013<br>Resumo: Estudos mostram que a resistência de união (RU) alcançada pelos sistemas adesivos autocondicionantes em superfície de esmalte pré-condicionado é significativamente maior se comparada aos valores obtidos em esmalte não cond

APA, Harvard, Vancouver, ISO und andere Zitierweisen

18

Brouns, Richard Allan. "A new dual-stage multicomponent thermosetting polymer system /." Thesis, Connect to this title online; UW restricted, 1993. http://hdl.handle.net/1773/9864.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

19

Rees, J. A. "Studies on adhesive gland systems in monogeneans." Thesis, University of East Anglia, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.372362.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

20

Frank, Niklaus. "Adhesive Wafer Bonding for Microelectronic and Microelectromechanical Systems." Doctoral thesis, KTH, Signals, Sensors and Systems, 2002. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3410.

Der volle Inhalt der Quelle

Annotation:

<p>Semiconductor wafer bonding has been a subject of interestfor many years and a wide variety of wafer bonding techniqueshave been reported in literature. In adhesive wafer bondingorganic and inorganic adhesives are used as intermediatebonding material. The main advantages of adhesive wafer bondingare the relatively low bonding temperatures, the lack of needfor an electric voltage or current, the compatibility withstandard CMOS wafers and the ability to join practically anykind of wafer materials. Adhesive wafer bonding requires nospecial wafer surface treatmentssuch as planarisation.Structur

APA, Harvard, Vancouver, ISO und andere Zitierweisen

21

關健明 and Kin-ming Kwan. "An expert system for adhesive-bonded joints." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1995. http://hub.hku.hk/bib/B31212347.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

22

Kwan, Kin-ming. "An expert system for adhesive-bonded joints /." Hong Kong : University of Hong Kong, 1995. http://sunzi.lib.hku.hk/hkuto/record.jsp?B14038651.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

23

Schmitz, John F. "Comparison of soy-flour hydrolysates for wood adhesive systems." [Ames, Iowa : Iowa State University], 2006.

Den vollen Inhalt der Quelle finden

APA, Harvard, Vancouver, ISO und andere Zitierweisen

24

Bullock, James Michael Rex. "Biomechanics of the fibrillar adhesive system in insects." Thesis, University of Cambridge, 2010. https://www.repository.cam.ac.uk/handle/1810/226862.

Der volle Inhalt der Quelle

Annotation:

Many animals are able to scale smooth surfaces using adhesive structures on their feet. These organs are either soft pads with a relatively smooth surface or dense arrays of microscopic adhesive hairs with both designs having independently evolved in diverse taxa of arthropods and vertebrates. Biological adhesive pads out-perform conventional adhesives in many respects, making them important models for biomimetics. Hairy pads have attracted particular attention, because it has become feasible to fabricate similar synthetic microstructures. Nevertheless, the detailed performance and functional

APA, Harvard, Vancouver, ISO und andere Zitierweisen

25

O'Gara, Philip M. "The development of encapsulated systems for long-term adhesive repair." Thesis, University of Surrey, 2004. http://epubs.surrey.ac.uk/843658/.

Der volle Inhalt der Quelle

Annotation:

The overarching aim of this thesis was to develop a method of enhancing adhesive performance by introducing a self-repair capability into it. It was envisaged that such a capability would act to mitigate against degradation through environmental attack. Specifically it was desirable for the adhesive to be able to repair damage to the interface region of the joint, where defect formation may include zero-volume unbonds (ZVU) or similar artefacts. To achieve this, a means of introducing a repair material into the adhesive during manufacture. Encapsulation technology was seen as a means of achiev

APA, Harvard, Vancouver, ISO und andere Zitierweisen

26

Li, Weihong. "Adhesive Applied Roofing System Resistance Evaluation and its Quantification." Thesis, University of Ottawa (Canada), 2010. http://hdl.handle.net/10393/28711.

Der volle Inhalt der Quelle

Annotation:

Adhesive Applied Roofing System (AARS) is a new generation of built-up roof, gaining popularity in the North American low-slope roofing market. All components of AARS are integrated using adhesives. Wind flow creates suction over a low-slope roof, which exerts uplift forces on the roof system. The components of AARS are subjected to the combined action of tensile and shearing forces due to the dynamic wind uplift action. As part of a research project, to quantify the wind performance of AARS, three different test methods, namely, pullout (to simulate the tensile force), peel (to simulate the s

APA, Harvard, Vancouver, ISO und andere Zitierweisen

27

Stark, Alyssa Yeager. "The Effect of Water on the Gecko Adhesive System." University of Akron / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=akron1405334677.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

28

Wu, Jun. "Development of a peel test procedure for adhesive applied roof systems." Thesis, University of Ottawa (Canada), 2008. http://hdl.handle.net/10393/28040.

Der volle Inhalt der Quelle

Annotation:

Roofing systems are an important component of the building envelope. Though the Adhesive Applied Roof Systems (AARS) are gaining popularity in North America, systematic review of the existing national and international standards revealed that there is no proper testing procedure established to quantify the peel resistance of AARS. The objective of the present study is to develop a peel testing procedure based on systematic laboratory investigations. Specimens (6 in. x 6 in. or 152 mm x 152 mm) composed of insulation and cover board were adhered together by applying cold adhesives. To represent

APA, Harvard, Vancouver, ISO und andere Zitierweisen

29

Current, Jayson. "Development of a pullout test method for adhesive applied roofing systems." Thesis, University of Ottawa (Canada), 2009. http://hdl.handle.net/10393/28056.

Der volle Inhalt der Quelle

Annotation:

A review of literature and standards revealed no standardized process exists for the evaluation or characterization of wind uplift resistance of Adhesive Applied Roofing Systems (AARS). It was determined that a pullout test method -- a test in which the adhered components of roofing samples were subjected to tensile loading until failure -- could be used to quantify wind uplift performance. From the literature study, critical variables were extracted. Among these were the pullout rate, the specimen size and the specimen attachment condition. After conducting a series of extensive pullout tests

APA, Harvard, Vancouver, ISO und andere Zitierweisen

30

Saldano, Lisa M. (Lisa Monique) 1973. "Nondestructive evaluation of structural silicone adhesive joints in building evelope systems." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/46148.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

31

Lira, Renato Queiroz Nogueira. "Bond strength of a total-etch adhesive system with different viscosities to ER:YAG LASER irradiated dentin." Universidade Federal do CearÃ, 2013. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=10955.

Der volle Inhalt der Quelle

Annotation:

nÃo hÃ<br>Preparos cavitÃrios dentÃrios confeccionados com laser de Er:YAG podem resultar em uma maior conservaÃÃo de tecidos sadios, maior abertura dos tÃbulos dentinÃrios sem presenÃa de lama dentinÃria, menor nÃmero de microrganismos na cavidade, alÃm de menor sensibilidade dolorosa durante sua confecÃÃo. Considerando que a irradiaÃÃo a laser pode diminuir a resistÃncia de uniÃo de materiais restauradores Ã dentina, esse estudo analisou o efeito da viscosidade de um sistema adesivo de condicionamento total de dois passos, em dentina irradiada com laser de Er:YAG. A dentina preparada foi te

APA, Harvard, Vancouver, ISO und andere Zitierweisen

32

Quaroni, G. M. G. "TUNING THE MECHANICAL AND ADHESIVE PROPERTIES OF TRANS-DERMAL DRUG DELIVERY SYSTEMS." Doctoral thesis, Università degli Studi di Milano, 2018. http://hdl.handle.net/2434/540072.

Der volle Inhalt der Quelle

Annotation:

Drugs are usually applied onto the skin either for the treatment of localized diseases or systemic pathologies. Among the available dosage forms transdermal patches and the newest film-forming systems are considered the most attractive dosage forms. Firmly adhering to the skin, they assure a prolonged release of the drug predetermining the administered dose and the area of application. Film-forming systems are composed by a polymeric solution or suspension which contains the active substance(s). Patches in their simplest configuration consist of a flexible backing layer, an adhesive matri

APA, Harvard, Vancouver, ISO und andere Zitierweisen

33

Diolosà, Marina. "Development of a new nano-engineered biopolymer-based dental adhesive system." Doctoral thesis, Università degli studi di Trieste, 2015. http://hdl.handle.net/10077/11136.

Der volle Inhalt der Quelle

Annotation:

2013/2014<br>Lo scopo di questa tesi di dottorato è stato studiare l'effetto sulla durabilità dell’interfaccia adesiva del chitosano, modificato con gruppi metacrilici, con l’obiettivo di migliorare l'affidabilità clinica dei restauri dentali. Attualmente, la ricerca in questo settore mira ad aumentare la durata nel tempo del legame resina-dentina. Questa ricerca propone un nuovo concetto di sistema adesivo bi-funzionale basato su un biopolimero naturale in grado di creare doppia reticolazione covalente. Il chitosano è un polimero biocompatibile e non tossico. In questo studio è stato ipotizza

APA, Harvard, Vancouver, ISO und andere Zitierweisen

34

Liljenborg, Linnea, and Ghinwah Chaaban. "Bindningsstyrka mellan komposit och porslin för metallkeramik med förbehandling av olika reparationssystem." Thesis, Malmö universitet, Odontologiska fakulteten (OD), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-42863.

Der volle Inhalt der Quelle

Annotation:

Syfte: Syftet med föreliggande in-vitro studie är att undersöka olika kompositbaserade reparationssystem och dess bindningsstyrka till porslin för metallkeramiska konstruktioner. Material och metod: Metallstavar tillverkades via CAD/CAM i CoCr (5.0x5.0x15.0mm) kortsidan förbehandlades genom sandblästring (aluminumoxid, 250 µm), ångblästring, oxidation, sandblästring och ångblästring. Fältspatporslin applicerades enligt följande: opak, dentin, emalj, till höjden av 1.2 ± 0.2 mm. Porslinsytorna slipades med sandpapper, 600-, 800-, 1200-kornstorlek kiselkarbid. Fem grupper (n=15) gav totalt 75 pr

APA, Harvard, Vancouver, ISO und andere Zitierweisen

35

Acker, Jason Paul. "Influence of cell adhesions on the freezing response of biological systems." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp04/mq21148.pdf.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

36

Skoorka, Michelle E. "The effect of humidity on composite lap joints and an electrochemical study on coatings and galvanic systems /." View online ; access limited to URI, 2004. http://0-wwwlib.umi.com.helin.uri.edu/dissertations/dlnow/3135915.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

37

Green, Martyn Dylan. "Pre-treatment of automotive adhesive systems (PAAS) : characterisation and comparison of pre-treated polypropylene." Thesis, University of Bristol, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.396718.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

38

Atta, M. O. A. "A comparative study of the bond strength of chemical and mechanical retention systems for direct bonded bridge retainers." Thesis, King's College London (University of London), 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.320471.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

39

Scott, Keith Alan. "Economic Feasibility of Implementing a Resin Distribution Measurement System for MDF Fiber." Thesis, Virginia Tech, 2001. http://hdl.handle.net/10919/31835.

Der volle Inhalt der Quelle

Annotation:

There have been successful techniques developed to measure resin distribution of phenol-formaldehyde adhesive on several types of wood surfaces. However, a technique that quantitatively measures UF resin on wood surfaces has been a problem because UF resin is colorless on wood fiber. The first objective of this study was to develop a technique to quantitatively measure surface area coverage and statistical distribution of urea-formaldehyde (UF) resin on medium density fiberboard (MDF) fiber. Two techniques were evaluated to quantitatively measure UF resin. One technique treated the resinat

APA, Harvard, Vancouver, ISO und andere Zitierweisen

40

Pagani, S. "Polyaminomethacrylates as crystallization inhibitors in drug in adhesive delivery system made of polydimethylsiloxane." Doctoral thesis, Università degli Studi di Milano, 2006. http://hdl.handle.net/2434/57986.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

41

Pazinatto, Flavia Bittencourt. "Influência do posicionamento do espécime na resistência adesiva à dentina e na espessura da camada de sistemas adesivos." Universidade de São Paulo, 2006. http://www.teses.usp.br/teses/disponiveis/25/25131/tde-07022007-144601/.

Der volle Inhalt der Quelle

Annotation:

Investigou-se a influência da inclinação das paredes de dentina (paralela ou perpendicular à ação da gravidade) e da variação regional dos espécimes (terços cervical ou oclusal) na resistência adesiva e na espessura da camada de adesivo. Vinte e cinco molares humanos foram seccionados no sentido mésio-distal e paralelamente ao seu longo eixo, obtendo-se secções vestibulares e linguais, as quais foram lixadas produzindo-se superfícies planas de dentina. Sistemas adesivos (Adper Single Bond-SB e Prime & Bond 2.1- PB2.1) foram aplicados na dentina, ora paralelamente ora perpendicularmente à ação

APA, Harvard, Vancouver, ISO und andere Zitierweisen

42

Michaelis, Marc [Verfasser], and Claudia S. [Akademischer Betreuer] Leopold. "Characterization of Pressure Sensitive Adhesive Systems for Transdermal Patches / Marc Michaelis. Betreuer: Claudia S. Leopold." Hamburg : Staats- und Universitätsbibliothek Hamburg, 2015. http://d-nb.info/1072553929/34.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

43

Vrana, Mark A. "A chemical and mechanical evaluation of interfacial fracture in dicyandiamide cured epoxy/steel adhesive systems." Diss., This resource online, 1995. http://scholar.lib.vt.edu/theses/available/etd-06062008-163707/.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

44

Flores, Joel D. "Chemical characterization and two-step cure kinetics of a high performance epoxy adhesive system." Thesis, Wichita State University, 2006. http://hdl.handle.net/10057/1609.

Der volle Inhalt der Quelle

Annotation:

The cure kinetics of a high performance epoxy adhesive system based on TGDDM/DGEBA/DDS/DICY and toughened with carboxy terminated poly(acrylonitrile-co-butadiene) rubber with aluminum filler was investigated using differential scanning calorimetry. Three different sets of experiments were performed to follow the cure kinetics of the adhesive in a multi-step cure cycle. Three-dimensional plots of data entered into a surface-fitting software allowed for the interpolation of the degree and rate of cure as functions of heating rate and temperature, time and temperature, or time and initial degree

APA, Harvard, Vancouver, ISO und andere Zitierweisen

45

Nagel, Daniel Matthias. "Analysis of adhesive and repulsive functions of FLRT proteins in central nervous system development." Diss., Ludwig-Maximilians-Universität München, 2015. http://nbn-resolving.de/urn:nbn:de:bvb:19-178954.

Der volle Inhalt der Quelle

Annotation:

Fibronectin-leucine-rich-repeat-transmembrane proteins (FLRTs) are a family of three single pass transmembrane proteins with extracellular leucine rich repeats and a short intracellular domain of largely unknown function. They are broadly expressed in the developing and adult nervous system as well as in other tissues. FLRTs have been implicated in a variety of different developmental processes mainly via two functions: as homophilic cell adhesion molecules, and as repulsive ligands for Unc5-positive cells. Furthermore, they can regulate cell adhesion via control of surface expression of C Cad

APA, Harvard, Vancouver, ISO und andere Zitierweisen

46

Flores, Joel D. Stevenson William T. K. "Chemical characterization and two-step cure kinetics of a high performance epoxy adhesive system." Diss., A link to full text of this thesis in SOAR, 2006. http://soar.wichita.edu/dspace/handle/10057/1609.

Der volle Inhalt der Quelle

Annotation:

Thesis (M.S.)--Wichita State University, College of Liberal Arts and Sciences, Dept. of Chemistry.<br>"July 2006." Title from PDF title page (viewed on Nov. 4, 2007). Thesis adviser: William T. K. Stevenson. Includes bibliographic references (leaves 95-99).

APA, Harvard, Vancouver, ISO und andere Zitierweisen

47

Hefer, Arno Wilhelm. "Adhesion in bitumen-aggregate systems and quantification of the effect of water on the adhesive bond." Texas A&M University, 2004. http://hdl.handle.net/1969.1/1457.

Der volle Inhalt der Quelle

Annotation:

This research is intended to contribute toward the understanding, development, and implementation of a more fundamental design process for bituminous pavement materials, utilizing thermodynamic properties of the materials involved. The theory developed by van Oss, Chaudhury and Good forms the basis of this research. Optimization of techniques to characterize surface energy, as well as consideration and evaluation of additional factors that influence adhesion in the presence of water, are pursued. A synthesis of theories and mechanisms of bitumen-aggregate adhesion is presented, and existing an

APA, Harvard, Vancouver, ISO und andere Zitierweisen

48

Lanyon, Benjamin P. "Novel techniques for the characterisation of curing epoxy adhesive systems using non-contact electromagnetic acoustic transducers." Thesis, University of Warwick, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.425551.

Der volle Inhalt der Quelle

APA, Harvard, Vancouver, ISO und andere Zitierweisen

49

Azevêdo, Larissa Marinho. "Efeito da contaminação salivar na resistência de união da interface dentina/resina composta, tratada com clorexidina 0,2%." Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/25/25148/tde-10032016-150129/.

Der volle Inhalt der Quelle

Annotation:

O objetivo deste estudo in vitro foi analisar o efeito da contaminação por saliva na interface dentina/resina composta formada por dois sistemas adesivos (convencional de 3 e 2 passos), em dentina tratada com clorexidina a 0,2%, após 24 horas, 6 meses e 12 meses, para verificar a resistência de união (RU) e análise da interface adesiva em Microscopia Eletrônica de Varredura (MEV) . Os espécimes foram tratados com dois tipos de adesivos Adper Single Bond (SB) e Adper Scotchbond Multi Purpose (MP) e divididos aleatoriamente em 8 grupos de acordo com o tratamento da dentina após a desmineralizaçã

APA, Harvard, Vancouver, ISO und andere Zitierweisen

50

TOGNAN, GUIDO. "Study of steel - Glass Fibre-Reinforced Polymer (GFRP) bonded joints for the design of anchorage systems for flat bottom GFRP tanks subjected to seismic actions." Doctoral thesis, Università degli Studi di Trieste, 2021. http://hdl.handle.net/11368/2988919.

Der volle Inhalt der Quelle

Annotation:

In recent years, structural adhesive bonding has gained more interest in industrial and civil engineering. The wide use of combinations of different materials, e.g. steel and Glass-Fibre Reinforced Polymer (GFRP) adhesively bonded joints, is often the only alternative structural technique to welded or bolted joints. The structures of industrial storage tanks involved in situations that require high strength and stability to aggressive fluids make wide use of GFRP. The layout of plants usually needs slender, cylindrical and flat bottom tanks. These tanks need to be anchored at their base to wit

APA, Harvard, Vancouver, ISO und andere Zitierweisen

Wir bieten Rabatte auf alle Premium-Pläne für Autoren, deren Werke in thematische Literatursammlungen aufgenommen wurden. Kontaktieren Sie uns, um einen einzigartigen Promo-Code zu erhalten!