Acceder

Bibliografías temáticas / Assembly and disassembly

Índice

Artículos de revistas
Tesis
Libros
Capítulos de libros
Actas de conferencias
Informes

Literatura académica sobre el tema "Assembly and disassembly"

Autor: Grafiati

Publicado: 4 de mayo de 2024

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros

Elija tipo de fuente:

Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Assembly and disassembly".

Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.

También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.

Artículos de revistas sobre el tema "Assembly and disassembly"

1

Lucena, Rafael, Noah Dephoure, Steve P. Gygi, et al. "Nucleocytoplasmic transport in the midzone membrane domain controls yeast mitotic spindle disassembly." Journal of Cell Biology 209, no. 3 (2015): 387–402. http://dx.doi.org/10.1083/jcb.201412144.

Texto completo

Resumen

During each cell cycle, the mitotic spindle is efficiently assembled to achieve chromosome segregation and then rapidly disassembled as cells enter cytokinesis. Although much has been learned about assembly, how spindles disassemble at the end of mitosis remains unclear. Here we demonstrate that nucleocytoplasmic transport at the membrane domain surrounding the mitotic spindle midzone, here named the midzone membrane domain (MMD), is essential for spindle disassembly in Schizosaccharomyces pombe cells. We show that, during anaphase B, Imp1-mediated transport of the AAA-ATPase Cdc48 protein at the MMD allows this disassembly factor to localize at the spindle midzone, thereby promoting spindle midzone dissolution. Our findings illustrate how a separate membrane compartment supports spindle disassembly in the closed mitosis of fission yeast.

Los estilos APA, Harvard, Vancouver, ISO, etc.

2

Su, Shi Jie, Xi Feng Fang, and Fang Li. "Research on the Disassembly Sequence Planning for Mechanical Product." Applied Mechanics and Materials 80-81 (July 2011): 1300–1304. http://dx.doi.org/10.4028/www.scientific.net/amm.80-81.1300.

Texto completo

Resumen

Mechanical products have been inevitably disassembled when they are regarded to be recycled or repaired. The disassembling procedure must be decided no matter what way is used to disassemble. The key is to decide the disassembly sequence for parts/components. In order to generate the disassembly sequence rapidly and correctly, similar thread binary tree and graph algorithm are used to establish the model of disassembly after analyzing the characteristics of Mechanical products. Firstly, generate the related matrix obtained from the 3D CAD assembly model; secondly, transform the undirected graph to the directed graph based on the practical constraints between parts/components; finally, search the restrictions among the directed graph and generate the efficient disassembly sequence. A prototype system of disassembly sequence planning based on UG was implemented which has the functions such as parts and assembly information extraction, definition constraints between components, disassembly sequence planning and etc. The centrifugal lubricating oil filter case study proves the validity and feasibility of the proposed method.

Los estilos APA, Harvard, Vancouver, ISO, etc.

3

Swart, Arthur J. "Engaging African engineering students with problem-based learning by using the disassembly–assembly technique." International Journal of Electrical Engineering & Education 55, no. 3 (2018): 244–57. http://dx.doi.org/10.1177/0020720918767052.

Texto completo

Resumen

Problem-based learning identifies problems in ways that are conducive to student learning and emphasizes problem-solving, critical thinking and collaborative skills. These three aspects are core to disassembly–assembly techniques used in higher education where students are required to engage with visual, auditory and kinesthetic learning within a laboratory environment. The purpose of this article is to describe a disassembly–assembly technique used in a compulsory engineering module and identify how many African engineering students can successfully create a problem (disassemble a two-stroke motor) and then correctly solve the problem (assemble the two-stroke motor back to a working condition). A longitudinal study involving quantitative data is used with descriptive statistics. Results indicate, that on average, 85.5% of African engineering students can successfully engage with the disassembly–assembly technique. A possible recommendation is to encourage more academics to make use of the disassembly-assembly technique with regard to engineering systems, equipment or machinery.

Los estilos APA, Harvard, Vancouver, ISO, etc.

4

Diepholz, Meikel, Michael Börsch, and Bettina Böttcher. "Structural organization of the V-ATPase and its implications for regulatory assembly and disassembly." Biochemical Society Transactions 36, no. 5 (2008): 1027–31. http://dx.doi.org/10.1042/bst0361027.

Texto completo

Resumen

V-ATPases (vacuolar ATPases) are membrane-bound multiprotein complexes that are localized in the endomembrane systems of eukaryotic cells and in the plasma membranes of some specialized cells. They couple ATP hydrolysis with the transport of protons across membranes. On nutrient shortage, V-ATPases disassemble into a membrane-embedded part (V0), which contains the proton translocation machinery, and an extrinsic part (V1), which carries the nucleotide-binding sites. Disassembly decouples ATP hydrolysis and proton translocation. Furthermore, the disassembled parts are inactive, leading to an efficient shutdown of ATP consumption. On restoring the nutrient levels, V1 and V0 reassemble and restore ATP-hydrolysis activity coupled with proton translocation. This reversible assembly/disassembly process has certain conformational constraints, which are best fulfilled by adopting a unique conformation before disassembly.

Los estilos APA, Harvard, Vancouver, ISO, etc.

5

Newman, Joseph, David J. Rowlands, and Tobias J. Tuthill. "An Engineered Maturation Cleavage Provides a Recombinant Mimic of Foot-and-Mouth Disease Virus Capsid Assembly-Disassembly." Life 11, no. 6 (2021): 500. http://dx.doi.org/10.3390/life11060500.

Texto completo

Resumen

Picornavirus capsids are assembled from 60 copies of a capsid precursor via a pentameric assembly intermediate or ‘pentamer’. Upon completion of virion assembly, a maturation event induces a final cleavage of the capsid precursor to create the capsid protein VP4, which is essential for capsid stability and entry into new cells. For the picornavirus foot-and-mouth disease virus (FMDV), intact capsids are temperature and acid-labile and can disassemble into pentamers. During disassembly, capsid protein VP4 is lost, presumably altering the structure and properties of the resulting pentamers. The purpose of this study was to compare the characteristics of recombinant “assembly” and “disassembly” pentamers. We generated recombinant versions of these different pentamers containing an engineered cleavage site to mimic the maturation cleavage. We compared the sedimentation and antigenic characteristics of these pentamers using sucrose density gradients and reactivity with an antibody panel. Pentamers mimicking the assembly pathway sedimented faster than those on the disassembly pathway suggesting that for FMDV, in common with other picornaviruses, assembly pentamers sediment at 14S whereas only pentamers on the disassembly pathway sediment at 12S. The reactivity with anti-VP4 antibodies was reduced for the 12S pentamers, consistent with the predicted loss of VP4. Reactivity with other antibodies was similar for both pentamers suggesting that major antigenic features may be preserved between the VP4 containing assembly pentamers and the disassembly pentamers lacking VP4.

Los estilos APA, Harvard, Vancouver, ISO, etc.

6

Shetty, Devdas, and Ahad Ali. "A new design tool for DFA/DFD based on rating factors." Assembly Automation 35, no. 4 (2015): 348–57. http://dx.doi.org/10.1108/aa-11-2014-088.

Texto completo

Resumen

Purpose – The purpose of this paper is to develop a tool design for assembly and disassembly using rating factors. Design engineers need an automated tool to effectively analyze the ease of assembly and disassembly of the products or subassemblies. A good assembly design helps in easier disassembly and thus makes it easier to service, repair and maintain. Reuse and recycling aspects are given importance in the present days due to environmental regulations. Designers now use the life cycle design of the products. This creates an environment for the successful application of design for manufacturing, assembly and disassembly tools. This paper addresses some of those issues. Design/methodology/approach – The analysis of a product design for ease of assembly/disassembly depends largely on whether the product is to be assembled/disassembled manually, with automation or a combination of these. For example, the criteria for ease of automatic feeding and orienting are much more stringent than those for manual handling of parts. The new design for assembly/disassembly (DFA/DFD) evaluation tool explained here enables the designer to review the existing design. This paper examines the existing techniques in the area of DFA/DFD and suggests a new methodology based on rating factors. Excel is used to create the interface for the user. Other popular methods were examined such as Boothroyd-Dewhurst, Lucas. Access, reuse, removal, tool, task and time method and assembly score method (Poli) were used as a base for this study. Findings – The end result of this research is a new approach linked to assembly/disassembly rating score. Originality/value – The new DFA/DFD evaluation tool enables the designer to review the existing DFA and DFD difficulties.

Los estilos APA, Harvard, Vancouver, ISO, etc.

7

Javorova, Angela, Erika Hrušková, and Karol Velíšek. "Assembly and Disassembly via Automation Tools." Key Engineering Materials 467-469 (February 2011): 2066–71. http://dx.doi.org/10.4028/www.scientific.net/kem.467-469.2066.

Texto completo

Resumen

Assembly and disassembly is a new and also a rapid developed trend in manufacturing area. In the future the assembly and disassembly will be one inseparable part of manufacturing process. Especially automated disassembly is a technology, which is trying to satisfy needs and requirements. Many of special requirements are supported by international institutions, research programs and foundations. In our Institute of Manufacturing Systems and Applied Mechanics at Faculty of Materials Science and Technology the project named Intelligent assembly cell is realized. Within the frame of this project designing of structure, following of several assembly steps, organization of material flow and others is processed. Currently disassembly is one part of solving problems as assembly. Automated disassembly technique allows an automated separation of various parts, from which was disassembled product created.

Los estilos APA, Harvard, Vancouver, ISO, etc.

8

Abdullah, Nurhidayu, Fairul Azni Jafar, and Mohd Nazmin Maslan. "Experimental Design for Reverse Assembly Based Disassembly Process." Applied Mechanics and Materials 660 (October 2014): 1062–66. http://dx.doi.org/10.4028/www.scientific.net/amm.660.1062.

Texto completo

Resumen

Product disassembly is a vital strategy for industrial recycling and remanufacturing which generates the desired parts and/or subassemblies by means of separation of a product into its elements. In order to increase disassembly capacity while maintaining the parts quality, new standards had to be established. Manual disassembly work perform by human will create inconsistency in the quality, efficiency, as well as time consuming, whereby it is believe that those weaknesses can be overcome by an automated performance. Therefore, this research work will re-evaluate the existing approach of disassembly process; reverse-assembly method in disassemble a mini toy car. The design methodology is conducted to verify the disassembly process performance and identify factors affecting the performance. The disassembly process experiment will be conducted in two ways; manual and semi-automated disassembly. This paper reviews the design process of the proposed experimental methodology. The important components of the experimental methodology are discussed in this paper.

Los estilos APA, Harvard, Vancouver, ISO, etc.

9

Holubek, Radovan, Roman Ruzarovsky, and Karol Velíšek. "New Approach in Design of Automated Assembly Station for Disassembly Process." Applied Mechanics and Materials 421 (September 2013): 595–600. http://dx.doi.org/10.4028/www.scientific.net/amm.421.595.

Texto completo

Resumen

In this contribution is presented the new idea of another approach and application of designed and verified assembly station that can be used for disassembly process. Automated assembly station with Cartesian industrial robot is especially designed for assembly of specific products. New approach consists in the fact that such equipment can be used for disassembly of assembled products after lifecycle. This solution can be used where it can be readjusted assembly station by proposing of particular disassembly equipment that supports the disassembly process. The paper deals with the analysis of automated assembly station design methodology and with proposals for concrete actions that need to be made to the assembly station may to change to a device designed for disassembly process. This problematic solves a development of the assembly and disassembly station with respect to lifecycle management of the assembly product and also assembly system with Cartesian robot. The main idea of the development of such a device is the use of the same Cartesian industrial robot, material supply devices, assembly and disassembly units in one workplace with different application. Result of design methodology is the verification and proposition of real automated assembly and disassembly workplace with Cartesian robot for known verified model of assembled actuator.

Los estilos APA, Harvard, Vancouver, ISO, etc.

10

Soh, SL, S. K. Ong, and A. Y. C. Nee. "Design for assembly and disassembly for remanufacturing." Assembly Automation 36, no. 1 (2016): 12–24. http://dx.doi.org/10.1108/aa-05-2015-040.

Texto completo

Resumen

Purpose – This research aims to propose a methodology for a systematic, concurrent consideration of design for assembly (DFA) and disassembly guidelines and constraints for product remanufacturing. The methodology provides a holistic approach to design product from the remanufacturing perspective. Design/methodology/approach – The proposed methodology incorporates parts’ integration assessment and evaluation of part complexity and accessibility taking into consideration both DFA and design-for-disassembly (DFD) guidelines and constraints. Metrics for accessibility and complexity in retrieving the remanufacturable cores from a product are evaluated to determine the best possible disassembly route considering the practical constraints which an operator might face during disassembly. As there could be more than one feasible disassembly route to retrieve a core during remanufacturing, a disassembly evaluation is conducted to determine the optimal path after combination of the parts of the assembly. Findings – In remanufacturing, products need to be disassembled and re-assembled again. Conflicts exist between DFA and DFD. The proposed methodology serves to address these conflicting issues. The proposed methodology eases a designer’s effort systematically to incorporate both aspects, by incorporating practical consideration to determine an optimal disassembly sequence through integrating the handling aspect of assembly complexity assessment with the U-Rating disassembly effort indexing scheme to provide a quantitative evaluation of disassembly complexity, as disassembly still largely requires human effort. Research limitations/implications – Future research will explore methods to improve the user interface with features to determine feasible disassembly routes of a product automatically. This will relieve the effort of the product designer to a great extent. Originality/value – This paper proposes a methodology for a systematic, concurrent consideration of DFA and DFD to provide a holistic approach to product design from the remanufacturing perspective to ease the designer’s task. Practical considerations will be made to determine the optimal disassembly route of the product. DFD will only be required to be applied to the selected disassembly route to minimize conflicts with DFA.

Los estilos APA, Harvard, Vancouver, ISO, etc.

Más fuentes

Tesis sobre el tema "Assembly and disassembly"

1

Shanmugam, Sivamoorthy. "Automatic Sub-assembly detection, disassembly sequencing and disassembly direction prediction for an assembly model." Cincinnati, Ohio : University of Cincinnati, 2005. http://www.ohiolink.edu/etd/view.cgi?acc%5Fnum=ucin1109252927.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

2

SHANMUGAM, SIVAMOORTHY. "AUTOMATIC SUB-ASSEMBLY DETECTION, DISASSEMBLY SEQUENCING AND DISASSEMBLY DIRECTION PREDICTOR FOR AN ASSEMBLY MODEL." University of Cincinnati / OhioLINK, 2005. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1109252927.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

3

Baker, Michael. "The assembly and disassembly of clathrin cages." Thesis, University of Warwick, 2016. http://wrap.warwick.ac.uk/89475/.

Texto completo

Resumen

Clathrin mediated endocytosis (CME) is an integral process in eukaryotic cells and governs a wide range of processes in higher organisms including neurotransmitter release and cell signalling, to development and cell polarity. Due to its wide ranging roles this mechanism has been implicated in various disease states such as Huntington’s disease and various cancers as well as being a method of entry into cells for many viruses and bacteria. The process of CME involves the formation of a clathrin coat, primarily consisting of the protein clathrin, that drives uptake of cargo at the plasma membrane. These interactions are facilitated through a large family of proteins known as adaptor proteins, which drive the process of CME through specific interactions with clathrin, cargo, the plasma membrane and the cytoskeleton. Once the cargo has been endocytosed the process must be reversed through the actions of the disassembly proteins auxilin/GAK and Hsc70. A number of questions remain as to how adaptors promote assembly and how auxilin and Hsc70 drive disassembly through interaction with clathrin and potentially through interactions with the adaptor proteins. By purifying adaptor proteins and clathrin I have used various biochemical and biophysical techniques to investigate these interactions in vitro. Using a novel assembly assay based on dynamic light scattering I have shown that it is possible to measure the effect of adaptors on clathrin cage size distribution during assembly. In disassembly I have shown how mutations in the disassembly protein auxilin affect its ability to catalyse the disassembly of clathrin cages and how the presence of various adaptor proteins alters the ability of auxilin and Hsc70 to disassemble these structures. Finally, I demonstrate an inhibitory effect on disassembly by the adaptor protein epsin and propose a mechanism of interaction with clathrin that can be disrupted through mutations to epsin clathrin-binding motifs and discuss the implications of this effect for the role of adaptors in vivo.

Los estilos APA, Harvard, Vancouver, ISO, etc.

4

Schoen, Timothy Ryan. "Constraint-aware distributed robotic assembly and disassembly." Thesis, Massachusetts Institute of Technology, 2012. http://hdl.handle.net/1721.1/77078.

Texto completo

Resumen

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2012.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 83-85).<br>In this work, we present a distributed robotic system capable of the efficient assembly and disassembly of complex three-dimensional structures. We introduce algorithms for equitable partitioning of work across robots and for the efficient ordering of assembly or disassembly tasks while taking physical constraints into consideration. We then extend these algorithms to a variety of real-world situations, including when component parts are unavailable or when the time requirements of assembly tasks are non-uniform. We demonstrate the correctness and efficiency of these algorithms through a multitude of simulations. Finally, we introduce a mobile robotic platform and implement these algorithms on them. We present experimental data from this platform on the effectiveness and applicability of our algorithms.<br>by Timothy Ryan Schoen.<br>M.Eng.

Los estilos APA, Harvard, Vancouver, ISO, etc.

5

Sung, Raymond Chun Wai. "Automatic assembly feature recognition and disassembly sequence generation." Thesis, Heriot-Watt University, 2001. http://hdl.handle.net/10399/478.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

6

Mohd, Rashid Aiman. "Disassembly and assembly in the Malay building culture." Thesis, University of Sheffield, 2018. http://etheses.whiterose.ac.uk/22827/.

Texto completo

Resumen

Asian vernacular architecture is generally dynamic, progressing and constantly transforming. The significance of Asian vernacular values lies in the culture, identity and memory of the people rather than the fabric or preserved artefacts. Likewise, the vernacular traditional Malay houses are a manifestation of the craft process and meanings embodied in the people, their building practice and artefacts. However, the Malay building culture is diminishing while the numbers of tukang or master craftsmen is declining, which adds to the loss of traditional knowledge and skills in Malay house building culture. The study investigates the traditional craft of Malay house-building within the present in order to identify the legacy of Malay craftsmanship concerning knowledge and skills of tukang and their apprentices. Furthermore, the study explores contemporary Malay building practice and inquiring how traditions were and continued to be conveyed towards building participants. The unstructured interviews with tukang, experts and non-experts, while observing building activities were used to provide insights of the Malay house building culture within contemporary. The methodology adopted is relevant as much of the craft knowledge and skills are embodied and performed, rather than articulated in oral or literature. The study concluded that Malay architecture is rooted not in the tangible built fabric but in the knowledge and dexterity of tukang and the craft process relating to materials, tools, measurement and bodily movement. Similarly, the meaning of Malay craftsmanship is defined by tukang and embodied in their practice. However, tukang is more than simply a builder but has a spiritual role that connects the Malay cultural beliefs to the Malay house and the building process. Hence, the study implies that the Malay house building is a form of a spiritual practice emphasising the value of culture, memory and religious identity rather than purely narrating the structures. Furthermore, the findings of the study suggest that essential qualities of craftsmanship, knowledge and skills in Malay house-building are exemplified subliminally within the actions of buka-pasang or disassembly and assembly. The study demonstrates that the practice of disassembling and assembling existing Malay structures, was and still remain as a socially communicative act in transmitting building traditions. The study characterised the disassembly and assembly as a building process involving dyadic knowledge of technical (strategy) and spiritual (cultural) that manifest the poetics, procedural, ritual and somatic means of Malay house-building culture. Therefore the study asserted that performing disassembly and assembly afford to a sense of retracing footsteps of past mastery as an embodied heritage experience - hence comparable to the apprenticeship-style of learning that demonstrates the process of mimetic, causal learning and reflective cognitive process. Eventually, the study expresses that the values of Malay cultural heritage are not in the static heritage artefact, but the physical and spiritual interaction between artefacts and the people in the present. The answer to the loss of heritage and the decline of traditional building practice and knowledge it offers is through disassembly and assembly, where the study views this process as a catalyst in overcoming these shortcomings.

Los estilos APA, Harvard, Vancouver, ISO, etc.

7

Duggan, James. "Soluble factors affecting the assembly and disassembly of membrane rafts." Thesis, University of Nottingham, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.495061.

Texto completo

Resumen

The presence of membrane microdomains or rafts within cell membranes is an area of intensive research and debate, with the notion of intracellular membrane rafts proving particularly contentious. The full extent of their biological importance is unknown but, they do appear to have vital roles in key processes such as membrane transport and cell signalling. They have been shown to have significant involvement in the formation of the immunological synapse and subsequent immune cell activation. Their cellular functions are also hijacked by various pathogens such as the human immunodeficiency virus and prion diseases, establishing them as important pharmaceutical targets.

Los estilos APA, Harvard, Vancouver, ISO, etc.

8

Lane, Laura Alexandra. "Assembly and disassembly of protein complexes : insights from mass spectrometry." Thesis, University of Cambridge, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.608969.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

9

Chromy, Laura R. "The role of HSP70 chaperones in papovavirus disassembly and assembly /." Connect to full text via ProQuest. Limited to UCD Anschutz Medical Campus, 2007.

Buscar texto completo

Resumen

Thesis (Ph.D. in Molecular Biology) -- University of Colorado Denver, 2007.<br>Typescript. Includes bibliographical references (leaves 142-165). Free to UCD affiliates. Online version available via ProQuest Digital Dissertations;

Los estilos APA, Harvard, Vancouver, ISO, etc.

10

Chang, Piyen. "Selection and evaluation of joint types and joining processes for concurrent assembly/disassembly-based design." Thesis, This resource online, 1996. http://scholar.lib.vt.edu/theses/available/etd-09182008-063034/.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Más fuentes

Libros sobre el tema "Assembly and disassembly"

1

Muramatsu, Kevin. GunDigest book of shotguns: Assembly/disassembly. 3rd ed. Krause, 2012.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

2

The Gun digest book of revolvers: Assembly/disassembly. Gun Digest Books., 2011.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

3

The gun digest book of firearms assembly/disassembly. DBI Books, 1990.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

4

The Gun digest Book of firearms assembly/disassembly. 2nd ed. Krause Publications, 1999.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

5

Muramatsu, Kevin. Gun Digest book of tactical weapons: Assembly/disassembly. 2nd ed. Gun Digest Books, an imprint of F+W Media, Inc., 2013.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

6

Muramatsu, Kevin. Gun Digest book of centerfire rifles assembly/disassembly. 3rd ed. Gun Digest Books, 2013.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

7

Wood, J. B. The Gun digest book of automatic pistols assembly/disassembly. Gun Digest Books, 2007.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

8

The Gun Digest book of tactical weapons assembly/disassembly. Krause Publications, 2008.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

9

Wood, J. B. The Gun digest book of automatic pistols assembly/disassembly. Gun Digest Books, 2007.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

10

The Gun digest book of rimfire rifles assembly/disassembly. Gun Digest Books, 2006.

Buscar texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Más fuentes

Capítulos de libros sobre el tema "Assembly and disassembly"

1

Weik, Martin H. "assembly-disassembly facility." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_882.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

2

Cochrane, Andrew. "Assembly and disassembly." In The Archaeology of Art. Routledge, 2018. http://dx.doi.org/10.4324/9781315691343-7.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

3

Kao, Chiang. "Assembly and Disassembly Systems." In International Series in Operations Research & Management Science. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-31718-2_15.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

4

Weik, Martin H. "packet assembly-disassembly facility." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_13449.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

5

Lee, Sukhan. "Micro/Macro Assembly and Disassembly." In Frontiers of Assembly and Manufacturing. Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-14116-4_8.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

6

Cox, L. S., and C. J. Hutchison. "Nuclear Envelope Assembly and Disassembly." In Subcellular Biochemistry. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2401-4_9.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

7

Adir, Noam, Monica Dines, Merav Klartag, Ailie McGregor, and Meira Melamed-Frank. "Assembly and Disassembly of Phycobilisomes." In Microbiology Monographs. Springer Berlin Heidelberg, 2006. http://dx.doi.org/10.1007/7171_020.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

8

Seliger, G., C. Hentschel, and A. Kriwet. "Recycling and Disassembly — Legal Burden or Strategic Opportunity?" In Transforming Automobile Assembly. Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/978-3-642-60374-7_26.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

9

Ashman, W. G., F. Boniface, and S. Riley. "Automated assembly/disassembly of explosive weapons." In New Frontiers in Manufacturing. Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/978-3-662-12593-9_22.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

10

Wolff, Julius, Torge Kolditz, and Annika Raatz. "A Learning Method for Automated Disassembly." In Precision Assembly in the Digital Age. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-05931-6_6.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Actas de conferencias sobre el tema "Assembly and disassembly"

1

Banda, Keith, and Ibrahim Zeid. "Disassembly analysis before assembly." In Photonics Technologies for Robotics, Automation, and Manufacturing, edited by Surendra M. Gupta. SPIE, 2004. http://dx.doi.org/10.1117/12.516757.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

2

Chen, Shiang-Fong, James H. Oliver, Shuo-Yan Chou, and Lin-Lin Chen. "Parallel Disassembly by Onion Peeling." In ASME 1994 Design Technical Conferences collocated with the ASME 1994 International Computers in Engineering Conference and Exhibition and the ASME 1994 8th Annual Database Symposium. American Society of Mechanical Engineers, 1994. http://dx.doi.org/10.1115/detc1994-0118.

Texto completo

Resumen

Abstract For some assembly structures, parallel disassembly of components is necessary in order to reach a particular internal component. Due to the large number of possible combinations, the parallel disassembly problem is not easily solved in a general form. This paper addresses parallel disassembly via geometrical reasoning and presents an algorithm for finding a sequence to disassemble a structure by an onion peeling procedure, from outside to inside. This algorithm takes Max{O(N3), O(E)} time to find an efficient sequence to reach a particular component, where N is the number of components and E is the number of mating faces. In this algorithm, the disassemblability of various combinations of components are determined by traversing the mating graph of the structure and testing the monotonicity of paths in the graph. Separability testing is incorporated to determine whether the query components can be disassembled and moved to infinity without obstruction.

Los estilos APA, Harvard, Vancouver, ISO, etc.

3

Hanser, A. "Assembly + Disassembly of Interior Walls." In 19th International Symposium on Automation and Robotics in Construction. International Association for Automation and Robotics in Construction (IAARC), 2002. http://dx.doi.org/10.22260/isarc2002/0047.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

4

Tumkor, Serdar, and Goksel Senol. "Disassembly Precedence Graph Generation." In 2007 IEEE International Symposium on Assembly and Manufacturing. IEEE, 2007. http://dx.doi.org/10.1109/isam.2007.4288451.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

5

Littva, Matúš, and Michal Janovec. "Disassembly, inspection, repair and assembly techniques." In Práce a štúdie. University of Žilina, 2021. http://dx.doi.org/10.26552/pas.z.2021.1.11.

Texto completo

Resumen

The aim of this article is to present the current techniques of disassembly, control, repair, and assembly of aircraft components. It reproduces proven but also modern procedures used in aviation practice. The article is divided into several consecutive parts. The first part is a preface which is a kind of introduction to the issues. The following section is an analysis of available sources of information about maintenance of aircraft components. The third part is the content core, in which we describe the basic techniques of aircraft maintenance. Mentioned part containsinformation about the inspection techniques, corrosion treatment procedures, repairs of structural components and typical non-destructive tests. In the last part, we derive the conclusions and emphasize the importance of the described maintenance procedures in the future. We have included several illustrations in the article for better understanding.

Los estilos APA, Harvard, Vancouver, ISO, etc.

6

Payne, Seth T., C. Fletcher Garrison, Steven E. Markham, Tucker Hermans, and Kam K. Leang. "Assembly Planning Using a Two-Arm System for Polygonal Furniture." In ASME 2019 Dynamic Systems and Control Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/dscc2019-9173.

Texto completo

Resumen

Abstract This paper focuses on the assembly planning process for constructing polygonal furniture (such as cabinets, speakers, bookshelves, etc.) using robotic arms and manipulators. An algorithm is described that utilizes easily-implemented and generally-accepted motion planning algorithms to take advantage of the polygonal nature of the furniture, which reduces the complexity of the assembly planner. In particular, the algorithm disassembles a given CAD model in simulation to find a valid assembly order and disassembly path, then implements that assembly order with two robotic arms, using the disassembly path as the finishing path of the part into the assembly. Additionally, it finds a collision-free plan developed for each of the arms in the correct assembly order with the final result being the assembly of the model.

Los estilos APA, Harvard, Vancouver, ISO, etc.

7

Morato, Carlos, Krishnanand Kaipa, and Satyandra K. Gupta. "Assembly Sequence Planning by Using Multiple Random Trees Based Motion Planning." In ASME 2012 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/detc2012-71243.

Texto completo

Resumen

In this paper, we introduce multiple random trees based motion planning to perform assembly sequence planning for complex assemblies. Initially, given an assembly model, our technique performs disassembly sequence planning. This approach dynamically reduces the size and complexity of the assembly based on a hierarchical exploration structure that keeps information about the completion of the disassembly. Next, the disassembly information is used to generate feasible assembly sequences, along with precedence constraints, to assemble each part into the current subassembly. The motion planning system chooses part order by detecting geometrical interferences and analyzing feasible part movements. Results from tests on a variety of complex assemblies validate the efficiency of our approach.

Los estilos APA, Harvard, Vancouver, ISO, etc.

8

Huang, Yuan Mao, and Yu-Chung Liao. "Improved Disassembly Matrices for Disassembly Processes." In ASME 2004 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/detc2004-57593.

Texto completo

Resumen

The combined interference matrix and the combined contact matrix of product components with connection matrices, special connection relations, the disassembly sequence matrix, instability of sub-assemblies, changes of sub-assembly disassembly direction or tools, platform and the effect of gravity are investigated to obtain the optimum disassembly process. This methodology improves Huang and Huang’s method. Software is generated and two products were used as examples. Results of optimum disassembly processes were same as those obtained from other researchers. Therefore, the methodology is feasible for study of disassembly processes of products, and software can reduce the computer memory and time.

Los estilos APA, Harvard, Vancouver, ISO, etc.

9

Kang, Changmuk, and Yoo S. Hong. "Dynamic Disassembly Planning for Remanufacturing of Multiple Types of Products." In ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/detc2010-28657.

Texto completo

Resumen

With the increased need for remanufacturing of end-of-life products, achieving economic efficiency in remanufacturing is urgently needed. The purpose of this study was to devise a cost-minimization plan for disassembly and remanufacturing of end-of-life products returned by consumers. A returned end-of-life product is disassembled into remanufacturable parts, which are supposed to be used for new products after being remanufactured. Each end-of-life product is disassembled into parts at variable levels as needed, taking into account not only disassembly but also manufacturing, remanufacturing, and holding inventory of remanufacturable parts. This study proposes a linear programming model for derivation of the optimal disassembly plan for each returned product, under deterministically known demand and return flows. For the purposes of an illustrative example, the proposed model was applied to the formulation of an optimal disassembly and remanufacturing plan of ‘Fuser Assembly’ of laser printers. The solution reveals that variable-level disassembly of products saves a significant remanufacturing cost compared with full disassembly.

Los estilos APA, Harvard, Vancouver, ISO, etc.

10

Kljajin, Milan L. "Design for Disassembly due to Maintenance and Recycling." In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1050.

Texto completo

Resumen

Abstract It is a fact that the products of today are not designed for easy dismantling or disassembly. Integrated design, certain fastening and assembly principles and surface coatings, for example, can make it very difficult to disassemble the product and to separate materials into non contaminated groups. Hereafter environmental concerns are requiring that disassembly for maintenance and recycling be considered during product design — in fact, total life cycle costs for a product are becoming an essential part of simultaneous engineering. As conclusion this paper gives a short discussion of development course of design for disassembly (DFD).

Los estilos APA, Harvard, Vancouver, ISO, etc.

Informes sobre el tema "Assembly and disassembly"

1

Hickman, D. LLNL Torso Phantom Assembly and Disassembly. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/883814.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

2

Hess, John F. Analysis of Keratin Filament Assembly/Disassembly and Structure Following Modification by Sulfur Mustard Analogs. Defense Technical Information Center, 2003. http://dx.doi.org/10.21236/ada418634.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

3

Finch, Mickey, and Jeff Hollander. Enhancing Reliability of the Weapons Material Waste Disposition Process in the Assembly/Disassembly Operations Facility. Office of Scientific and Technical Information (OSTI), 2018. http://dx.doi.org/10.2172/1478633.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

4

Williamson, Douglas Alan. Expert System analysis of non-fuel assembly hardware and spent fuel disassembly hardware: Its generation and recommended disposal. Office of Scientific and Technical Information (OSTI), 1991. http://dx.doi.org/10.2172/10185549.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

5

de Cespedes Molina, Manuel, and Tatianna Menocal. Photographic Mitigation Documentation Related to the Engine Assembly and Disassembly Facility, Area 25, Nevada National Security Site, Nye County, Nevada. Office of Scientific and Technical Information (OSTI), 2021. http://dx.doi.org/10.2172/1824345.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

6

J. L. Smith. Streamlined Approach for Environmental Restoration Plan for Corrective Action Unit 113: Reactor Maintenance, Assembly, and Disassembly Building Nevada Test Site, Nevada. Office of Scientific and Technical Information (OSTI), 2001. http://dx.doi.org/10.2172/788467.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

7

Reno, Ron, Susan Edwards, Jeffrey Wedding, Maureen King, Cheryl Collins, and Harold Drollinger. A Revised Architectural Survey of the Nuclear Engine Maintenance Assembly and Disassembly Facility, Area 25, Nevada National Security Site, Nye County, Nevada. Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1576570.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

8

Jeremy Gwin and Douglas Frenette. Authorized Limits for the Release of a 25 Ton Locomotive, Serial Number 21547, at the Area 25 Engine Maintenance, Assembly, and Disassembly Facility, Nevada Test Site, Nevada. Office of Scientific and Technical Information (OSTI), 2010. http://dx.doi.org/10.2172/979387.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

9

Housekeeping Closure Report for Corrective Action Unit 288: Area 25 Engine Maintenance, Assembly, and Disassembly/Treatability Test Facility Chemicals Sites, Nevada Test Site, Nevada. Office of Scientific and Technical Information (OSTI), 2000. http://dx.doi.org/10.2172/758907.

Texto completo

Los estilos APA, Harvard, Vancouver, ISO, etc.

Ofrecemos descuentos en todos los planes premium para autores cuyas obras están incluidas en selecciones literarias temáticas. ¡Contáctenos para obtener un código promocional único!