Bibliografías temáticas / Polypropene

Índice

  1. Artículos de revistas
  2. Tesis
  3. Libros
  4. Capítulos de libros
  5. Actas de conferencias
  6. Informes

Literatura académica sobre el tema "Polypropene"

Autor: Grafiati
Publicado: 4 de junio de 2021
Última modificación: 7 de febrero de 2022

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros

Elija tipo de fuente:

Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Polypropene".

Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.

También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.

Artículos de revistas sobre el tema "Polypropene"

1

Rotzinger, Bruno y Martin Brunner. "In-reactor stabilization of polypropene". Polymer Degradation and Stability 93, n.º 1 (enero de 2008): 316–20. http://dx.doi.org/10.1016/j.polymdegradstab.2007.09.008.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Mori, Hideharu, Tomoyuki Hatanaka y Minoru Terano. "Thermal stability of syndiotactic polypropene". Macromolecular Rapid Communications 18, n.º 2 (febrero de 1997): 157–61. http://dx.doi.org/10.1002/marc.1997.030180213.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Tampier, Monika y Gundolf Trafara. "Melting of isotactic polypropene in blends with atactic polypropene and isotactic poly(1-ethylethylene)". Makromolekulare Chemie. Macromolecular Symposia 52, n.º 1 (diciembre de 1991): 247–52. http://dx.doi.org/10.1002/masy.19910520123.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Shiono, Takeshi, Yoshihide Akino y Kazuo Soga. "Synthesis of Isotactic Polypropene-block-Poly(methyl methacrylate) Using Magnesium Bromide-Terminated Isotactic Polypropene". Macromolecules 27, n.º 21 (octubre de 1994): 6229–31. http://dx.doi.org/10.1021/ma00099a046.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Kaminsky, Walter y Katharina Wiemann. "Polypropene nanocomposites by metallocene/MAO catalysts". Composite Interfaces 13, n.º 4-6 (enero de 2006): 365–75. http://dx.doi.org/10.1163/156855406777408557.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Dietrich, Ulf, Martijn Hackmann y Bernhard Rieger. "A New Class of Thermoplastic Elastic Polypropenes Prepared with a High Activity “Dual-Side” Zirconocene Catalyst". Rubber Chemistry and Technology 73, n.º 5 (1 de noviembre de 2000): 839–46. http://dx.doi.org/10.5254/1.3547623.

Texto completo
Resumen
Abstract It is well known that the mechanical properties of highly isotactic polypropene depend on the crystalline structure of the material. Up to now, the polymer properties were modified by varying either the processing conditions—e.g., extrusion, annealing etc.—or the composition—e.g., blending, nucleation. Highly active ethylene bridged C1-symmetric zirconocene catalysts can be used to design the material properties by varying the crystallinity of thermoplastic (elastic) polypropenes. With the new unsymmetric catalyst rac−dichloro[1−(9−fluorenyl)−2−(R,S)−(5,6−cyclopenta−2−methylinden−1−η5−yl)ethane]zirconium (IV)/MAO (1) polypropenes of variable isotacticities are accessible. The variable and thus defined use of two different sides of the catalytically active species allows the placement of single, cumulated and consecutive [rr]-triads within an isotactic polymer chain. The formation of these stereoerrors is adjusted in an arbitrary manner by the polymerization conditions temperature and monomer concentration. The mechanical properties of polypropenes produced with 1/MAO vary from tough thermoplastic to excellent elastic. Stress—strain behavior of these physically crosslinked elastomers can be designed similar to the ones of polyisoprene or partly crosslinked natural rubber.
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Feller, J. F., A. Guyot, R. Spitz, B. Chabert y J. F. Gerard. "Coupling agents for polypropylene/glass fiber composites: synthesis of functionalized isotactic polypropene and crystallization". Composite Interfaces 3, n.º 2 (enero de 1995): 121–34. http://dx.doi.org/10.1163/156855495x00039.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Ying, Zong Rong, Zhi Min Dang, Xiao Hui Yan, Xiu Ouyang y Yan Ying Gao. "Crystallization Properties of Polypropene/Graphene Oxide Nanocomposites". Advanced Materials Research 335-336 (septiembre de 2011): 347–50. http://dx.doi.org/10.4028/www.scientific.net/amr.335-336.347.

Texto completo
Resumen
Polypropene (PP)/graphite oxide (GO) nanocomposite was prepared via solution blending and studied by adopting polarized optical microscopy observations, X-ray diffraction analysis and differential scanning calorimetry analysis. It is found that GO acts as an effective heterogeneous nucleation agent. The addition of GO doesn’t change the crystalline structure of PP, but leads to the decrease of spherulite dimension. GO makes the temperature of the crystallization exothermic peak increase, the crystallization temperature range and the half width of the crystallization peak narrow.
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Cecchin, Giuliano, Giampiero Morini y Anteo Pelliconi. "Polypropene product innovation by reactor granule technology". Macromolecular Symposia 173, n.º 1 (agosto de 2001): 195–210. http://dx.doi.org/10.1002/1521-3900(200108)173:1<195::aid-masy195>3.0.co;2-a.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Zhang, Qi-jin, Jun Wen, Xiao-lie Luo y Zhi-yong Wang. "Synthesis of polypropene-graft-poly(ɛ-caprolactone)". Macromolecular Chemistry and Physics 196, n.º 4 (abril de 1995): 1221–28. http://dx.doi.org/10.1002/macp.1995.021960421.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
Más fuentes

Tesis sobre el tema "Polypropene"

1

Norris, Timothy Scott. "Surface treatments for adhesive bonding of polypropene". Thesis, Oxford Brookes University, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.261262.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Tvrdý, Michal. "Stanovení kinetiky polymerace propenu na Zieglerových-Nattových katalyzátorech metodami násadové polymerace a Stopped-Flow za průmyslových podmínek". Master's thesis, Vysoké učení technické v Brně. Fakulta chemická, 2019. http://www.nusl.cz/ntk/nusl-401930.

Texto completo
Resumen
This thesis is focused on the determination of the propene polymerization kinetics on phthalate and nonphthalate diester Ziegler-Natta MgCl2-supported catalysts under the industrial conditions. The kinetic profiles were determined by various laboratory techniques for propene polymerization. For assessing the profiles were utilized batch gas and liquid polymerization modes in 2-litre and 4-litre reactors. Finally, the results were complemented with the runs performed in a unique Stopped-Flow apparatus, which allows polymerization of liquid propene at very short polymerization times. The kinetics profiles of both catalysts were determined and compared by combination of experimental data of these techniques. The basic properties of the synthesized polymeric powders were measured, such as the melt flow index, bulk density and amount of polypropene fraction soluble in cold xylene.
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Tang, Eunice Wai Chong. "Preparation and characterization of polypropylene-polypropylene (PP-PP) composites /". View Abstract or Full-Text, 2003. http://library.ust.hk/cgi/db/thesis.pl?MECH%202003%20TANG.

Texto completo
Resumen
Thesis (M. Phil.)--Hong Kong University of Science and Technology, 2003.
Includes bibliographical references (leaves 91-95). Also available in electronic version. Access restricted to campus users.
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Wang, Xiaowei. "Adhesive bonding of polypropylene". Thesis, University of Bristol, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.247559.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Işık, Kıvanç Tanoğlu Metin. "Layered silicate/polypropylene nanocomposites/". [s.l.]: [s.n.], 2006. http://library.iyte.edu.tr/tezler/master/makinamuh/T000532.pdf.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Ekstam, Hanna y Benjamin Quarmochi. "Design av infästningsanordning för virveldämpare på drönare". Thesis, Linnéuniversitetet, Institutionen för maskinteknik (MT), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-106215.

Texto completo
Resumen
Arbetet syftar till att ta fram en hållbar infästning för virveldämpare till SSRS drönare av modell flygande vinge. Drönaren är specifikt framtagen för att användas till maritima sök och räddningsuppdrag och för att bidra till att utöka den svenska kustens säkerhet. Arbetet studerar ett landningsscenario för drönaren och utifrån detta tas en ny infästning fram. Infästningen av virveldämparen skall vara lätt att hantera för personalen, kräva minimalt med reparation och hålla för 50 landningar. Infästningen skall kunna utlösa och separera virveldämparen från vingen om det under landningen uppstår så stora krafter att dessa komponenter riskerar att ta skada. Arbetet följer DRM-struktur och syftar till att ta fram en prototyp med hjälp av en uttömmande idégenerering utförd med metoderna Speedstorming, Brainstorming och SCAMPER. Konceptsållningen sker med hjälp av anpassade poängsättningsmetoder och Pugh-analys. Det resulterande konceptet bestämmer vilka dimensioner som krävs för att kunna utföra hållfasthetsberäkningar på den valda infästningen, därefter skapas en prototyp vilken används för att utföra hållfasthetstester. De utförda beräkningarna och testerna gav olika resultat och den därav dragna slutsatsen medförde att materialegenskaper rörande elastisk deformation och variabler på hållfasthetstestet ej har beaktas. Testerna visade att den framtagna prototypen av expanderad polypropen hanterade de förutsedda krafterna väl även om testerna inte kunde utföras under helt verklighetstrogna landningsförhållanden. Slutresultatet av projektarbetet är att den framtagna infästningen av virveldämparen har, utifrån tillgängliga testningsmetoder, påvisat önskade egenskaper och att utförligare tester behöver genomföras för att avgöra om den uppfyller samtliga produktkrav.
This work is aimed at producing durable attachments for winglets on a drone, model flying wing, owned by the SSRS. The drone is specifically developed to be used for maritime search and rescue missions and to contribute to increasing the security along the Swedish coast and major inland lakes. During this work only one landing scenario by the drone was studied while creating the attachments, which required to be easy to handle, minimal to no repair work and a durability for 50 landings. The attachments also need to be able to release in case of excessive force during landing which risks jeopardizing the integrity of the wing or winglet. The work followed the DRM-structure and aimed to create a prototype through an exhaustive idea generation technique in three steps using the methods Speedstorming, Brainstorming and SCAMPER. All of these methods go through voting, Pugh analysis and concept screening. After one concept had been singled out its dimensions were decided on and used in calculations to determine its strength. From this information a physical winglet attachment prototype made of expanded polypropylene was created and used in strength and durability tests. Calculations and tests were found to have varying results and the conclusion was made that the material properties regarding elastic deformation and test variables most likely had not fully been taken into account. The tests failed to generate a realistic landing scenario given the requirements but still gave a positive result concerning the prototype's ability to absorb shock loads at landing. This work has resulted in a preliminary winglet attachment prototype which through testing has shown satisfying shock absorbing abilities, and that further testing is required to decide whether the attachment can meet all of the set product requirements.
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Yilmaz, Sule Seda. "Preparation And Characterization Of Organoclay-polypropylene Nanocomposites With Maleic Anhydride Grafted Polypropylene Compatibilizer". Master's thesis, METU, 2011. http://etd.lib.metu.edu.tr/upload/12613291/index.pdf.

Texto completo
Resumen
The aim of this study was to improve the mechanical properties &ldquo
Moplen&rdquo
EP300L which is a heterophase copolymer. Polymer blends and nanocomposites were prepared by melt compounding method in a twin screw extruder. Nanofil®
5 (N5) and Nanofil®
8(N8) were used as the organoclays, and maleic anhydride grafted polypropylene (M) was used as the compatibilizer. The effects of additive concentrations and types of organoclays on the morphology, mechanical and thermal properties were investigated. Organoclay loading over 2 wt% prevented the intercalation mechanism resulting in large aggregates of clay, thus the material properties became poor even in the presence of compatibilizer. Compatibilizer addition improved the intercalation ability of the polymer, however a substantial increase in mechanical properties was not obtained up to 6 wt % loading of the compatibilizer. XRD analysis revealed that intercalated structures were formed with the addition of compatibilizer and organoclay. The nanocomposites that were prepared with N5 type organoclay showed delaminated structures at 6 wt % compatibilizer loading. v Nanofill ®
5 exhibited the highest improvements in mechanical properties, since the degree of organoclay dispersion was better in Nanofill ®
5 containing nanocomposites in comparison to Nanofill ®
8 containing ones. The DSC analysis indicated a insignificant reduction in the melting temperature of the ternary nanocomposites.
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Lepoutre, Priscilla. "The microstructure of polypropylene blends with ethylene vinyl alcohol copolymer and maleated polypropylene /". Thesis, McGill University, 1989. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=61816.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Njoroge, Daniel [Verfasser]. "Thesis: Preparation and characterization of modified-graphene oxide/polypropylene nanocomposites : polypropylene nanocomposites / Daniel Njoroge". Berlin : epubli, 2016. http://www.epubli.de/.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Can, Semra. "Characterization Of Serpentine Filled Polypropylene". Phd thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/3/12609434/index.pdf.

Texto completo
Resumen
ABSTRACT CHARACTERIZATION OF SERPENTINE FILLED POLYPROPYLENE Can, Semra Ph.D., Department of Polymer Science and Technology Supervisor: Prof. Dr. Teoman Tinç
er March 2008, 158 pages In this study, the aim is to prepare polypropylene (PP)/serpentine composites and study their mechanical, thermal and morphological properties. Another objective is to explore whether it is possible to have PP/serpentine nanocomposites with melt intercalation method by using the advantage of the layer silicate structure of serpentine. The most widely used fillers in PP are talc and mica which belong to the phyllosilicates group of silicate minerals. So far, there has been almost no study employing serpentine as filler in either any polymers or PP, although it also belongs to the same group of minerals as talc and mica. Accordingly, it was planned to divide the work into the study of two groups. In group 1, for the compositions with 2, 5, 10 and 20 wt% serpentine, the particulate filler effects of serpentine both alone and in the presence of surface treatments with hydrochloric acid (HCl) and silane coupling agent (SCA) were investigated. The most impressive results in terms of static and dynamic mechanical properties were achieved with SCA rather than HCl. When the effect of serpentine without any treatment is considered, reinforcing effect of it can easily be observed without deteriorating the composite properties even at high filler loadings. In group 2, the nanofiller effects of serpentine in 2 and 5 wt% filled compositions by modification of both the filler and the matrix were aimed to be examined with melt intercalation method. In addition to HCl and SCA treatments, maleic anhydride grafted polypropylene (PP-g-MA) and quaternary ammonium salt (QAS) of cetyl-trimethyl-ammonium bromide were used as compatibilizer and intercalating agent, respectively. While the amount of QAS was kept constant, different percentages of compatibilizer were employed. The presence of QAS and PP-g-MA further improved the properties with respect to group 1 members. Interestingly, the percentage strain at break values did not decrease as much as group 1 compositions with the same filler content. It can be concluded that partial intercalation of group 2 compositions was achieved, according to the X-ray and TEM results. Keywords: Serpentine, PP/serpentine composites, SCA, PP-g-MA, serpentine nanocomposites
Los estilos APA, Harvard, Vancouver, ISO, etc.
Más fuentes

Libros sobre el tema "Polypropene"

1

Karger-Kocsis, J., ed. Polypropylene. Dordrecht: Springer Netherlands, 1999. http://dx.doi.org/10.1007/978-94-011-4421-6.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Weizer, William P. Polypropylene. Cleveland, Ohio: Freedonia Group, 1998.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Hayes, Teresa L., Rebecca L. Friedman y Richard J. Jorkasky. Polypropylene. Cleveland: Freedonia Group, 2000.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Ita, Paul A. World polypropylene. Cleveland: Freedonia Group, 1998.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Nayak, Rajkishore. Polypropylene Nanofibers. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-61458-8.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Karger-Kocsis, József y Tamás Bárány, eds. Polypropylene Handbook. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12903-3.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Teresa, Calafut, ed. Polypropylene: The definitive user's guide and databook. Norwich, NY: Plastics Design Library, 1998.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Polypropylene and other polyolefins: Polymerization and characterization. Amsterdam: Elsevier, 1990.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

(Firm), Knovel, ed. Polypropylene: An A-Z reference. Dordrecht, The Netherlands: Kluwer Academic Publishers, 1998.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Natta, Giulio, Paolo Maltese, Paolo Olivieri y Francesco Protospataro. Il polipropilene: Una storia italiana. Arrone: Thyrus, 2003.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
Más fuentes

Capítulos de libros sobre el tema "Polypropene"

1

Al-Hussein, Mahmoud y Gert Strobl. "A Comparative Study of the Mechanisms of Initial Crystallization and Recrystallization after Melting in Syndiotactic Polypropene and Isotactic Polystyrene". En Polymer Crystallization, 48–63. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/3-540-45851-4_4.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Talarico, Giovanni, Claudio De Rosa y Finizia Auriemma. "Tacticity, Regio and Stereoregularity". En Polypropylene Handbook, 1–35. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12903-3_1.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Standau, Tobias y Volker Altstädt. "Foams". En Polypropylene Handbook, 579–641. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12903-3_10.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Auriemma, Finizia, Claudio De Rosa, Anna Malafronte, Miriam Scoti y Rocco Di Girolamo. "Solid State Polymorphism of Isotactic and Syndiotactic Polypropylene". En Polypropylene Handbook, 37–119. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12903-3_2.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Horváth, Flóra, János Molnár y Alfréd Menyhárd. "Polypropylene Nucleation". En Polypropylene Handbook, 121–84. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12903-3_3.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Pawlak, Andrzej y Andrzej Galeski. "Crystallization of Polypropylene". En Polypropylene Handbook, 185–242. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12903-3_4.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Pantani, Roberto, Felice De Santis y Vito Speranza. "Morphology Development and Control". En Polypropylene Handbook, 243–94. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12903-3_5.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Gahleitner, Markus, Cornelia Tranninger y Petar Doshev. "Polypropylene Copolymers". En Polypropylene Handbook, 295–355. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12903-3_6.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Móczó, János y Béla Pukánszky. "Particulate Filled Polypropylene: Structure and Properties". En Polypropylene Handbook, 357–417. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12903-3_7.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Chow, Wen Shyang. "Polypropylene Blends: Properties Control by Design". En Polypropylene Handbook, 419–80. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-12903-3_8.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.

Actas de conferencias sobre el tema "Polypropene"

1

Sandholzer, M., K. Bernreitner y K. Klimke. "Polypropylene and polypropylene-elastomer blends for medical packaging". En PROCEEDINGS OF THE REGIONAL CONFERENCE GRAZ 2015 – POLYMER PROCESSING SOCIETY PPS: Conference Papers. Author(s), 2016. http://dx.doi.org/10.1063/1.4965575.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Abdouss, Majid y Naser Sharifi Sanjani. "Oxidation of Polypropylene and Effects of Compatibilization of Oxidized Polypropylene". En Processing and Fabrication of Advanced Materials VIII. WORLD SCIENTIFIC, 2001. http://dx.doi.org/10.1142/9789812811431_0111.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Zhou, Yuanxin, Mohammad Monirul Hasan y Shaik Jeelani. "Effect of Carbon Nanofiber on Thermal and Tensile Properties of Polypropylene". En ASME 2006 International Mechanical Engineering Congress and Exposition. ASMEDC, 2006. http://dx.doi.org/10.1115/imece2006-13254.

Texto completo
Resumen
In the present study, effect of vapor grown carbon nanofiber on the mechanical and thermal properties of polypropylene was investigated. Firstly, nanofibers were dry-mixed with polypropylene powder and extruded into filaments by using a single screw extruder. Then the tensile tests were performed on the single filament at the strain rate range from 0.02/min to 2/min. Experiments results show that both neat and nano-phased polypropylene were strain rate strengthening material. The tensile modulus and yield strength both increased with increasing strain rate. Experimental results also show that infusing nanofiber into polypropylene can increase tensile modulus and yield strength, but decrease the failure strain. At the same time, thermal properties of neat and nano-phased polypropylene were characterized by TGA. TGA results have showed that the nanophased system is more thermally stable. At last, a nonlinear constitutive equation has been developed to describe strain rate sensitive behavior of neat and nano-phased polypropylene.
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Dafalla, Muawia y Ali Obaid. "The Role of Polypropylene Fibers and Polypropylene Geotextile in Erosion Control". En Second International Conference on Geotechnical and Earthquake Engineering. Reston, VA: American Society of Civil Engineers, 2013. http://dx.doi.org/10.1061/9780784413128.077.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Mandolfino, Chiara, Enrico Lertora y Carla Gambaro. "Neutral polypropylene laser welding". En ESAFORM 2016: Proceedings of the 19th International ESAFORM Conference on Material Forming. Author(s), 2016. http://dx.doi.org/10.1063/1.4963496.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Melve, Bjo̸rn. "Sheath Materials for Direct Electrical Heating Cable: Long Term Testing". En ASME 2007 26th International Conference on Offshore Mechanics and Arctic Engineering. ASMEDC, 2007. http://dx.doi.org/10.1115/omae2007-29282.

Texto completo
Resumen
A high voltage cable is strapped to the flowlines on the HTHP Kristin field as a part of the direct electric heating (DEH) system. The cable with its components has to function in temperatures above 100 °C since it is connected to the hot flowlines. Four different candidate cable sheath materials were exposed to an accelerated ageing program that simulated the conditions the cable should survive during the twenty years lifetime. The materials were a stiff polypropylene (pipe grade), a rubber modified polypropylene, a thermoplastic elastomer and polyvinylidenfluoride (PVDF). The test conditions were one year exposure in 130 °C oxygenated sea water (8 ppm O2). After the exposure were the mechanical properties of the thermoplastic elastomer significantly degraded and the surface of the material was greasy. The stiff polypropylene was not stable for a long term exposure at these conditions. The rubber modified polypropylene was an acceptable sheath material. The PVDF material was not influenced by the exposure and was the best ranking material.
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Michalchuk, Walter, Stewart Hughes, Jeff Ross, Phil Bates y Frank Maine. "Oriented Polypropylene for Automotive Applications". En SAE 2001 World Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2001. http://dx.doi.org/10.4271/2001-01-0309.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Jones, Kyle. "Waterborne One-Component Polypropylene Coating". En International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1996. http://dx.doi.org/10.4271/960917.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Qiu, Xunlin, Werner Wirges, Reimund Gerhard y Heitor Cury Basso. "Are cellular polypropylene ferroelectrets ferroic?" En 2013 IEEE International Conference on Solid Dielectrics (ICSD). IEEE, 2013. http://dx.doi.org/10.1109/icsd.2013.6619905.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Saito, Yoshihiro, Yauhiro Matsuda y Shigeru Tasaka. "Dipole polarization of polypropylene electret". En 2008 13th International Symposium on Electrets ISE 13. IEEE, 2008. http://dx.doi.org/10.1109/ise.2008.4814008.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.

Informes sobre el tema "Polypropene"

1

Pople, John A. Morphology of Thermoplastic Elastomers:Stereoblock Polypropylene. Office of Scientific and Technical Information (OSTI), agosto de 2002. http://dx.doi.org/10.2172/799985.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Wallner, Gernot M. y Markus Povacz. IEA-SHC Task 39 INFO Sheet C1 - Polypropylene absorber materials. IEA Solar Heating and Cooling Programme, mayo de 2015. http://dx.doi.org/10.18777/ieashc-task39-2015-0026.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Sweetser, Daniel M. y Nicole E. Zander. Parameter Study of Melt Spun Polypropylene Fibers by Centrifugal Spinning. Fort Belvoir, VA: Defense Technical Information Center, julio de 2014. http://dx.doi.org/10.21236/ada607592.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Pople, John A. Rheo-Optics and X-Ray Scattering Study of Elastomeric Polypropylene. Office of Scientific and Technical Information (OSTI), octubre de 2001. http://dx.doi.org/10.2172/798896.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Datta, A., J. P. De Souza, A. P. Sukhadia y D. G. Baird. Processing Studies of Blends of Polypropylene with Liquid Crystalline Polymers. Fort Belvoir, VA: Defense Technical Information Center, enero de 1991. http://dx.doi.org/10.21236/ada232961.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Pople, John A. Tensile Properties and Small-Angle Neutron Scattering Investigation of Stereoblock Elastomeric Polypropylene. Office of Scientific and Technical Information (OSTI), agosto de 2002. http://dx.doi.org/10.2172/799990.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Chase, George G. y Sesh K. Kodavanti. Thickening of Clay Slurries by Periodic Pressure Flow Through a Porous Polypropylene Tube. Fort Belvoir, VA: Defense Technical Information Center, octubre de 1993. http://dx.doi.org/10.21236/ada462709.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Chung, T. C. y Justin A. Langston. Investigation of New Isotactic Polypropylene and Syndiotactic Polystyrene Materials for High Pulsed Power Capacitors. Fort Belvoir, VA: Defense Technical Information Center, agosto de 2008. http://dx.doi.org/10.21236/ada486263.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Kawahara, W. A., J. J. Totten y J. S. Korellis. Effects of temperature and strain rate on the nonlinear compressive mechanical behavior of polypropylene. Office of Scientific and Technical Information (OSTI), mayo de 1989. http://dx.doi.org/10.2172/6261053.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Stanciulescu, M. y H. Seoud. Effect of polyethylene, polypropylene and polystyrene on coke suppression during the thermal cracking of bitumen and heavy oils. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1993. http://dx.doi.org/10.4095/304574.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
También puede estar interesado en las bibliografías ampliadas sobre el tema "Polypropene" para tipos de fuentes particulares:
Artículos de revistas Tesis Libros
Ofrecemos descuentos en todos los planes premium para autores cuyas obras están incluidas en selecciones literarias temáticas. ¡Contáctenos para obtener un código promocional único!

Pasar a la bibliografía