Bibliografías temáticas / Pressure in the mixer

Índice

  1. Artículos de revistas
  2. Tesis
  3. Libros
  4. Capítulos de libros
  5. Actas de conferencias
  6. Informes

Literatura académica sobre el tema "Pressure in the mixer"

Autor: Grafiati
Publicado: 28 de mayo de 2022
Última modificación: 30 de julio de 2025

Crea una cita precisa en los estilos APA, MLA, Chicago, Harvard y otros

Elija tipo de fuente:

Consulte las listas temáticas de artículos, libros, tesis, actas de conferencias y otras fuentes académicas sobre el tema "Pressure in the mixer".

Junto a cada fuente en la lista de referencias hay un botón "Agregar a la bibliografía". Pulsa este botón, y generaremos automáticamente la referencia bibliográfica para la obra elegida en el estilo de cita que necesites: APA, MLA, Harvard, Vancouver, Chicago, etc.

También puede descargar el texto completo de la publicación académica en formato pdf y leer en línea su resumen siempre que esté disponible en los metadatos.

Artículos de revistas sobre el tema "Pressure in the mixer"

1

Kravarikova, Helena. "Experiment Solution Velocity and Pressure Field in the Mixing Process Computer Simulation." Applied Mechanics and Materials 693 (December 2014): 68–73. http://dx.doi.org/10.4028/www.scientific.net/amm.693.68.

Texto completo
Resumen
The process of mixing materials is a very complex process. The mixing process is used for homogenisation of substances. Rather than propose a real mixer, you must first construct a mixer for operational purposes experimental solutions. Experimental solutions are most often realized in laboratory conditions. Experimental mixers are made according to the requirements of power mixers, fluid flow, density and viscosity of the mixed fluid. To investigate the mixing process in the Laboratory mixers are made on the basis of the criteria of non-dimensional simplex. For designing operating mixers can a
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Yang, Guo, Guangzhong Hu, Xianguo Tuo, Yuedong Li, and Jing Lu. "Optimization Design of a Polyimide High-Pressure Mixer Based on SSA-CNN-LSTM-WOA." Actuators 13, no. 8 (2024): 303. http://dx.doi.org/10.3390/act13080303.

Texto completo
Resumen
Foam mixers are classified as low-pressure and high-pressure types. Low-pressure mixers rely on agitator rotation, facing cleaning challenges and complex designs. High-pressure mixers are simple and require no cleaning but struggle with uneven mixing for high-viscosity substances. Traditionally, increasing the working pressure resolved this, but material quality limits it at higher pressures. To address the issues faced by high-pressure mixers when handling high-viscosity materials and to further improve the mixing performance of the mixer, this study focuses on a polyimide high-pressure mixer
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Ji, Hui, Xiurong Cao, Songlin Nie, and Fanglong Yin. "Simulation and experiment study of the self-excited oscillating mixer with abrasive jet used for the descaling of rusty steel." Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering 233, no. 5 (2019): 1109–27. http://dx.doi.org/10.1177/0954408919841189.

Texto completo
Resumen
A novel self-excited oscillating mixer is developed for the descaling of strip steel, which synthesizes the post-mixed abrasive water jet and self-excited oscillation. The realizable k-ɛ model is selected to investigate the effects of different abrasive entrance, inlet pressure, mixing chamber diameter, and length on the jet characteristics. Meanwhile, the effects of different inlet pressure and target distance on the outlet velocities for two kinds of mixers (including the developed mixer and conventional post-mixing mixer) with or without abrasive jet are investigated through simulation. Exp
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Revathi, D., and K. Saravanan. "Experimental studies on hydrodynamic aspects for mixing of non-Newtonian fluids in a Komax static mixer." Chemical Industry and Chemical Engineering Quarterly, no. 00 (2020): 9. http://dx.doi.org/10.2298/ciceq191017009r.

Texto completo
Resumen
Mixing is the degree of homogeneity of two or more phases and it plays a vital role in the quality of the final product. It is conventionally carried out by mechanical agitators or by static mixers. Static mixers are a series of geometric mixing elements fixed within a pipe, which use the energy of the flow stream to create mixing between two or more fluids or to inject metered liquid into a continuous process. The objective of this work is to predict hydrodynamic aspects of the static mixer designed. The mixing performance of Komax static mixer has been determined for the blending of non-Newt
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Schöck, J., F. Muggli, and S. Hirschberg. "Simulation of the Efficiency of Static Mixers." NAFEMS International Journal of CFD Case Studies 9 (March 2011): 43–50. http://dx.doi.org/10.59972/7gwrrmm7.

Texto completo
Resumen
Within the Sulzer Corporation the behavior and efficiency of static mixers is predicted by means of CFD. Typical mixers are the SMX mixer and the CompaX mixer. As the SMX mixer is used for laminar mixing and homogenization of high viscous fluids, the CompaX mixer is applied for turbulent flow regimes. Simulations carried out for these mixers have been validated with measurements. Key values to evaluate the efficiency are the pressure loss and mixing quality. The pressure loss for both mixer types can be directly gained from the CFD simulation. But it is not possible to predict the mixing quali
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Pang, Zhanzhou, Ranjing Chen, and Yue Cao. "Performance Analysis and Optimization for Static Mixer of SCR Denitration System under Different Arrangements." Energies 15, no. 23 (2022): 8977. http://dx.doi.org/10.3390/en15238977.

Texto completo
Resumen
In order to solve the poor flow performance issues of selective catalytic reduction (SCR) denitration systems, the effect of the static mixer on the flow field was studied using computational fluid dynamics (CFD) numerical simulations. Based on the analysis of the original SCR denitration system, two static mixers were selected to explore their influence on system performance. The results show that both static mixers can effectively improve the denitration performance under different conditions. The static mixer with a rotating arrangement showed a better performance in the uniformity of conce
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Chen, Hongjie, Jing Ge, and Zhizhou Xu. "A Study on the Evolution Laws of Entrainment Performances Using Different Mixer Structures of Ejectors." Entropy 26, no. 11 (2024): 891. http://dx.doi.org/10.3390/e26110891.

Texto completo
Resumen
Being the core of the ejector refrigeration system, an ejector with a suitable mixer, conical–cylindrical or cylindrical, is key to high-energy-efficiency and low-carbon systems. To promote the scientific selection of mixers for ejectors based on the theoretical models that have been validated by experiments, the evolution laws of the entrainment ratios in the two types of ejectors are studied under various operating conditions. Furthermore, the influence mechanism of the mixer structures on the entrainment ratio of the ejector is elucidated by comparing the distribution characteristics of the
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Rahmani, Ramin K., Theo G. Keith, and Anahita Ayasoufi. "Numerical Simulation and Mixing Study of Pseudoplastic Fluids in an Industrial Helical Static Mixer." Journal of Fluids Engineering 128, no. 3 (2005): 467–80. http://dx.doi.org/10.1115/1.2174058.

Texto completo
Resumen
Static mixers are increasingly being used to perform a variety of mixing tasks in industries, ranging from simple blending to complex multiphase reaction systems. Use of static mixers to process non-Newtonian fluids is quite common. Data on the pressure drop of non-Newtonian fluids in static mixers and the degree of mixing of materials through the mixer are very useful in the design and engineering application of these tools. This paper extends a previous study by the authors on an industrial helical static mixer and illustrates how static mixing processes of single-phase viscous liquids can b
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

M., Purusothaman, Sai Teja Nama, Jaswanth Reddy Muddarapu, Pavan Ram Oduri, and Surya Saketh Meka. "Structural Analysis of Mechanical Seal Holding for Mixer Pumps." International Journal of Engineering and Advanced Technology (IJEAT) 9, no. 3 (2020): 3867–72. https://doi.org/10.35940/ijeat.C6367.029320.

Texto completo
Resumen
A mechanical seal is a device that used to reduce leakage containing pressure or ignoring contamination. Mechanical seal is the device used in centrifugal Pumps, Mixers, Agitators and Compressors to arrest or reduce the leakage. The mechanical seal standard API 682 provides the design guidelines for the seals which are fits below 110mm shaft diameter and 4.2 N/mm2 seal chamber pressure. Any seal more than these parameters required special engineering or guidelines needs from technical service. The main aim is to design the mechanical seal for more than 110mm shaft diameter and more than 4.2 N/
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Chen, Guang Hui, and Zheng Liang Liu. "Numerical Research of Pressure Drop in Kenics Static Mixer." Advanced Materials Research 694-697 (May 2013): 547–50. http://dx.doi.org/10.4028/www.scientific.net/amr.694-697.547.

Texto completo
Resumen
The objective of the present work is to characterize and investigate the effect of aspect ratio and twist angle of elements on the pressure drop predictions in Kenics static mixers using three-dimensional CFD approach. Twenty different kinds of Kenics mixers have been characterized. The numerical approach took into account the relationship between pressure drop and aspect ratio and relationship between pressure drop and twist angle at high Reynolds number within the Kenics mixer, which was neglected in previous studies. It is found from the study that the pressure drop is the function of aspec
Los estilos APA, Harvard, Vancouver, ISO, etc.
Más fuentes

Tesis sobre el tema "Pressure in the mixer"

1

Latimer, Sharon. "Pressure Injury Prevention and the Role of the Patient: A Mixed Methods Study." Thesis, Griffith University, 2016. http://hdl.handle.net/10072/367363.

Texto completo
Resumen
Pressure injuries are acknowledged worldwide as a quality care indicator and a patient safety issue. Pressure injuries have negative impacts for patients, nurses and healthcare organisations in terms of physical and emotional distress, increased workloads and economic burden. Additionally, pressure injuries result in reduced community confidence in the healthcare system. Internationally and in Australia, pressure injury prevalence rates are concerning, with sustained reductions difficult to achieve despite the availability of prevention resources. International clinical practice guidelines rec
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Dunn, Matthew Thomas. "Design of a mixing unit for oil-in-water emulsions for hydraulic systems in underground mining." Thesis, Queensland University of Technology, 1997. https://eprints.qut.edu.au/36016/1/36016_Dunn_1997.pdf.

Texto completo
Resumen
The thesis details the design, development and implementation of a proportional mixer unit to mix emulsions in longwall mining applications. The principal aim of this thesis was to reduce the maintenance costs, down-time, and loss of production due to failure of the hydraulic roof support system in longwall mining. Improved operation can be achieved by increasing the control and reliability of the hydraulic fluid system. The present state of technology was reviewed in the metering and mixing systems such as: gear pumps and gear motors, venturi type, proportioning piston and metering pum
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Naber, Logan A. "High Pressure Ratio Compressor Performance Design and Optimization." University of Cincinnati / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1626357000628287.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Onal, Mehmet Ali Recai. "Pressure Leaching Of Caldag Lateritic Nickel Ore." Master's thesis, METU, 2013. http://etd.lib.metu.edu.tr/upload/12615480/index.pdf.

Texto completo
Resumen
The purpose of this study was to investigate the process optimization of combined high pressure acid leaching (HPAL) and mixed hydroxide precipitation (MHP) route for the extraction of nickel and cobalt from &Ccedil<br>aldag lateritic nickel ore. In order to extract nickel and cobalt values into pregnant leach solution (PLS), several process parameters of HPAL including acid load, temperature, leaching duration and particle size were investigated in comparative manner at constant solid concentration and agitation speed. After HPAL trials, it has been found that more than one combination of par
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Secen, Berk. "Pressure Leaching Of Sivrihisar-yunus Emre Nickel Laterites." Master's thesis, METU, 2011. http://etd.lib.metu.edu.tr/upload/12613437/index.pdf.

Texto completo
Resumen
The aim of this thesis study was to extract nickel and cobalt from Sivrihisar limonitic nickel laterite ore by high pressure acid leaching (HPAL) method under most economical operating parameters. Optimizing the conditions to yield a saleable quality mixed hydroxide product from the pregnant leach solution (PLS) was also investigated. To extract high amounts of nickel and cobalt from the laterite matrix<br>leaching duration, leaching temperature and sulfuric acid/ore ratio were studied at fixed conditions of -850 &micro<br>limonitic ore particle size and 40% solids concentration. The Sivrihis
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Takeiri, Fumitaka. "Topochemical and High-Pressure Routes to Synthesize Transition-Metal Mixed Anion Oxides." Kyoto University, 2017. http://hdl.handle.net/2433/228237.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Akizuki, Yasuhide. "High-Pressure Synthesis and Properties of Novel Perovskite Oxides." 京都大学 (Kyoto University), 2015. http://hdl.handle.net/2433/199319.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Joo, Jong-Hoon, Rotraut Merkle, Joachim Maier, et al. "XPS on mixed conducting perovskites at elevated temperatures and close-to-ambient gas pressure." Universitätsbibliothek Leipzig, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-187968.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Joo, Jong-Hoon, Rotraut Merkle, Joachim Maier, et al. "XPS on mixed conducting perovskites at elevated temperatures and close-to-ambient gas pressure." Diffusion fundamentals 12 (2010) 67, 2010. https://ul.qucosa.de/id/qucosa%3A13897.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Pavlíček, David. "CFD modelování mísení kapalin v potrubí." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-387733.

Texto completo
Resumen
This work is focused on computational modelling of mixing fluids in pipeline with static mixers. Main objective is to analyze several selected static mixers in a particular industrial application, namely dosing of the aluminium sulphate solution in the clarification process for potable water treatment. The analysis focuses on the degree of mixedness and pressure loss of individual mixers. Further, the aim of this work is to process the search of available types of static mixers. The benefit of this work is at least an effort to motivate the reader to deeper understanding of the mixing fluids,
Los estilos APA, Harvard, Vancouver, ISO, etc.
Más fuentes

Libros sobre el tema "Pressure in the mixer"

1

Raman, Ganesh. Aeroacoustic characteristics of a rectangular multi-element supersonic jet mixer-ejector nozzle. National Aeronautics and Space Administration, 1996.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Carlson, Melody. Mixed bags. Zondervan, 2008.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Carlson, Melody. Mixed bags. Zondervan, 2008.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

crow, Una. Mixer. The artist, 2002.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Fisher, Joseph A. A new approach to non-invasive oxygenated mixed venous PCO₂. National Aeronautics and Space Administration, 1986.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

A, Ansel Clifford, and United States. National Aeronautics and Space Administration., eds. A new approach to non-invasive oxygenated mixed venous PCO₂. National Aeronautics and Space Administration, 1986.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

(Firm), Resource Recycling Systems. Creating recycled materials markets for mixed office paper: Roles, responsibilities and pressure points : final report. The Systems, 1993.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Capici, Gaetano. Cement mixer. Cherry Lake Pub., 2011.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Wallace, Edgar. Der mixer. Scherz, 1993.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Froeb, Lori. Super concrete mixer. Reader's Digest Children's Books, 2003.

Buscar texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
Más fuentes

Capítulos de libros sobre el tema "Pressure in the mixer"

1

Bonneau, Dominique, Aurelian Fatu, and Dominique Souchet. "Computing the Hydrodynamic Pressure." In Mixed Lubrication in Hydrodynamic Bearings. John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781119004905.ch2.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Bonneau, Dominique, Aurelian Fatu, and Dominique Souchet. "Computing the Contact Pressure." In Mixed Lubrication in Hydrodynamic Bearings. John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781119004905.ch3.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Bukovčan, Peter, and Ján Koller. "Clinical Experience with Negative-Pressure Wound Therapy Combined with Silver-Impregnated Dressing in Mixed Wounds." In Pressure Injury, Diabetes and Negative Pressure Wound Therapy. Springer International Publishing, 2017. http://dx.doi.org/10.1007/15695_2017_55.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Hönerlage, B. "AgCl: transition pressure." In New Data and Updates for IV-IV, III-V, II-VI and I-VII Compounds, their Mixed Crystals and Diluted Magnetic Semiconductors. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-14148-5_16.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Gutowski, J. "CdO: enthalpy, transition pressure." In New Data and Updates for IV-IV, III-V, II-VI and I-VII Compounds, their Mixed Crystals and Diluted Magnetic Semiconductors. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-14148-5_175.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Hönerlage, B. "CuI: phase transitions, transition pressure." In New Data and Updates for IV-IV, III-V, II-VI and I-VII Compounds, their Mixed Crystals and Diluted Magnetic Semiconductors. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-14148-5_202.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Strauch, D. "AlN: phase transitions, transition pressure." In New Data and Updates for IV-IV, III-V, II-VI and I-VII Compounds, their Mixed Crystals and Diluted Magnetic Semiconductors. Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-14148-5_56.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Gooch, Jan W. "Mixer." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_7559.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Weik, Martin H. "mixer." In Computer Science and Communications Dictionary. Springer US, 2000. http://dx.doi.org/10.1007/1-4020-0613-6_11616.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Tietze, Ulrich, Christoph Schenk, and Eberhard Gamm. "Mixer." In Electronic Circuits. Springer Berlin Heidelberg, 2008. http://dx.doi.org/10.1007/978-3-540-78655-9_28.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.

Actas de conferencias sobre el tema "Pressure in the mixer"

1

Fonseca, Rui, and Fernando Bernardo. "Design of Microfluidic Mixers using Bayesian Shape Optimization." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.199876.

Texto completo
Resumen
Microfluidic mixing has gained popularity in the Pharmaceutical Industry due to its application in the field of Nano-based Drug Delivery Systems (DDS). The flow conditions in Microfluidic mixers enable very efficient mixing conditions, which are crucial for the production of Nanoparticles by Flash Nanoprecipitation (FNP), as it enables reproducible production of particles with low-size variability. Mixer geometry is one of the most determinant factors, as it largely determines the flow patterns and the degree of contact between the two mixing streams. In this paper, a shape optimization method
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Sariya, Aman, Andrew Huard, Ishan Jain, Arthur Caetano, Tobias Höllerer, and Misha Sra. "Hand Grip Pressure Visualization for Task Assistance." In 2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct). IEEE, 2024. https://doi.org/10.1109/ismar-adjunct64951.2024.00095.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Rahmani, Ramin K., Anahita Ayasoufi, and Theo G. Keith. "A Numerical Study on Enhancement of Heat Exchanger Performance by Inserting Static Mixer Elements." In ASME 2006 Pressure Vessels and Piping/ICPVT-11 Conference. ASMEDC, 2006. http://dx.doi.org/10.1115/pvp2006-icpvt-11-93055.

Texto completo
Resumen
In chemical processing industries, heating, cooling and other thermal processing of viscous fluids are an integral part of the unit operations. Static mixers are often used in continuous mixing, heat transfer, and chemical reactions applications. Generally, a static mixer consists of a number of equal stationary units, placed on the inside of a pipe or channel in order to promote mixing of flowing fluid streams. These mixers have low maintenance and operating costs, low space requirements, and no moving parts. A range of designs exists for a wide range of specific applications. The shape of th
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Wintergerste, Torsten. "Computation of Fluid-Structure Interaction in a Static Mixer Using MpCCi." In ASME 2002 Pressure Vessels and Piping Conference. ASMEDC, 2002. http://dx.doi.org/10.1115/pvp2002-1574.

Texto completo
Resumen
Static mixers are used for the mixing of fluids with different properties like viscosity, density, temperature, etc. The Sulzer SMB mixer is designed for a high pressure drop which is e.g. the case in polymer melt blending. The deformation of the mixer caused by the fluid flow is investigated by the coupling of commercial CFD and FEA codes through a communications library called MpCCI. This loose coupling approach gives the opportunity for calculating the deformation of very complex structures which can be used for an optimization process during the phase of development of new mixers. This pap
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Ma, Yanbao, Michael Fields, Chien-Pin Sun, et al. "Design of Microfluidic Mixer Utilizing Pressure Disturbances." In 2006 1st IEEE International Conference on Nano/Micro Engineered and Molecular Systems. IEEE, 2006. http://dx.doi.org/10.1109/nems.2006.334736.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Mudde, R. F., C. Van Pijpen, and R. Beugels. "Simulation of the Laminar Flow in a PRIMIX Static Mixer." In ASME 2002 Pressure Vessels and Piping Conference. ASMEDC, 2002. http://dx.doi.org/10.1115/pvp2002-1575.

Texto completo
Resumen
The PRIMIX helical static mixer has been investigated using numerical simulations. The flow is in the laminar regime (Re = 1 to 1000). The simulations concentrate on the pressure drop and on the use of particle tracking for mixing studies. For the pressure drop, experimental validation is provided. It is found that the pressure drop can be simulated with high accuracy for Re &lt; 350. For higher Re-values no grid independent solution could be obtained and the experimental results no longer agree with those of the simulations. The simulated pressure drop results scaled to the empty pipe pressur
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Mudde, R. F., R. J. R. Van de Kleij, and R. Beugels. "Simulation of the Heat Transfer to a Laminar Flow in a PRIMIX Static Mixer." In ASME/JSME 2004 Pressure Vessels and Piping Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/pvp2004-3104.

Texto completo
Resumen
The heat transfer from the wall to the process fluid in a PRIMIX helical static mixer has been investigated using numerical simulations. The flow is in the laminar regime, Re = 7 to 18. The simulations concentrate on heat transfer from a heated wall to the process fluid. Two different mixers are examined. A conventional one in which the elements are not connected to the wall of the tube and a special one, in which the elements are soldered to the tube wall. In the latter case the heat transfer is enhanced by about 23% which is attractive when dealing with fluids with a low thermal conductivity
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Rahmani, Ramin K., Theo G. Keith, and Anahita Ayasoufi. "Three-Dimensional Numerical Simulation and Performance Study of an Industrial Static Mixer Using Pseudo-Plastic Fluids." In ASME/JSME 2004 Pressure Vessels and Piping Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/pvp2004-3093.

Texto completo
Resumen
Mixing is an essential component of nearly all industrial chemical processes, ranging from simple blending to complex multi-phase reaction systems for which the reaction rate, the yield and the selectivity are highly dependent upon the mixing performance. Consequences of improper mixing include nonreproducible processing conditions and lowered product quality, resulting in the need for more elaborate downstream purification processes and increased waste disposal costs. A wide range of working fluids in industrial mixers are non-Newtonian. The non-Newtonian fluid studied here is a member of the
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Reich, Alton J., and Mark L. Underwood. "Lobed Mixer Analysis for Design Assessment and Improvement." In ASME/JSME 2004 Pressure Vessels and Piping Conference. ASMEDC, 2004. http://dx.doi.org/10.1115/pvp2004-3085.

Texto completo
Resumen
Lobed mixers have been the subject of research and development since the 1950s. The turbulence driven nature of the mixing process has been difficult to capture using CFD analysis, and much of the work performed to-date has been via experimental studies. This paper presents some of the findings from an on-going project to utilize analysis to assess the performance of a lobed mixing device, and several potential geometry modifications.
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Watanabe, Masanobu, Akio Sayano, Kunihiko Kinugasa, Hajime Mori, and Tsuyoshi Hagiwara. "Improvement of Jet Pump Inlet Mixer in Boiling Water Reactor for Mitigating Flow-Induced Vibration and Fouling." In ASME 2013 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/pvp2013-97235.

Texto completo
Resumen
Jet pumps in Boiling Water Reactor (BWR) have risk of damages by Flow-Induced Vibration (FIV) for when increasing the core flow rate for power uprating. Especially, the vibration by leakage flow at the slip joint between an inlet mixer and a diffuser can cause serious damage on jet pumps. It is one of the obstructive factors for power uprating. Another problem is crud deposition on the inside surface of the inlet mixer and nozzle. Thus fouling causes performance degradation of jet pumps. To reduce the risk of an FIV problem, the gap flow passage of the slip joint was modified based on the leak
Los estilos APA, Harvard, Vancouver, ISO, etc.

Informes sobre el tema "Pressure in the mixer"

1

Sist, Plinio, Marielos Peña-Claros, Juan Pablo Baldiviezo Calles, et al. Forest management for timber production and forest landscape restoration in the Amazon: The way towards sustainability. Sustainable Development Solutions Network (SDSN), 2023. http://dx.doi.org/10.55161/wxnq3205.

Texto completo
Resumen
Current guidelines for legal timber harvests are not sustainable. Timber yields can be substantially enhanced by the application of cost-effective silvicultural treatments that increase stocking and growth of timber trees. Growing interest in tropical forest restoration offers opportunities to promote the management of secondary and degraded forests for timber, and mixed plantations with native species. Timber yields from these restored areas would reduce pressure on natural forests – allowing larger areas to be set aside for protection and reducing harvesting intensity in natural forests.
Los estilos APA, Harvard, Vancouver, ISO, etc.
2

Buelow, Nicholas Lee. Microstructual investigation of mixed rar earth iron boron processed vis melt-spinning and high-pressure gas-atomization for isotrophic bonded permanent magnets. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/850076.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
3

Taylor, S. Spare mitigation/retrieval mixer pumps. Office of Scientific and Technical Information (OSTI), 1995. http://dx.doi.org/10.2172/10119491.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
4

Bajwa, Abdullah, and Timothy Jacobs. PR-457-17201-R03 Residual Gas Fraction Estimation Based on Measured In-Cylinder Pressure - Phase III. Pipeline Research Council International, Inc. (PRCI), 2021. http://dx.doi.org/10.55274/r0011996.

Texto completo
Resumen
An experimental study was carried out to characterize the scavenging behavior of a cross-scavenged, piston-aspirated, two-stroke, natural gas engine to aid in the development of computationally inexpensive simple scavenging models for onboard engine control by (1) studying the effects of changing operational parameters on the engine's scavenging performance, and (2) identifying the underlying phenomena driving the observed effects. Tracer based methods were used to quantify the scavenging and trapping performance of the engine - CO2 was used as a tracer for combustion products and pre-mixed fu
Los estilos APA, Harvard, Vancouver, ISO, etc.
5

Nitivattananon, Suchaya. Hydrodynamic of mixed-feed in circulating fluidized bed. Chulalongkorn University, 2009. https://doi.org/10.58837/chula.res.2009.32.

Texto completo
Resumen
The research was conducted in a circulating fluidized bed having diameter and height of riser of 5 and 200 cm., respectively, at ambient temperature and pressure. The objective was to study hydrodynamics of mixed-feed between sand and various biomasses including rice husk, sawdust, and bagasse at 50% by volume. The air flow rate was in the range of 4.2-5.7 m/s. The velocity of sand in the riser was obtained by using a high speed camera and an image processing software. The results showed that at the lowest gas velocity the velocities of sand in the mixture were higher than those in the single
Los estilos APA, Harvard, Vancouver, ISO, etc.
6

Feldman, M. J. SIS (Superconductor-Insulator-Superconductor) Mixer Research. Defense Technical Information Center, 1988. http://dx.doi.org/10.21236/ada192908.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
7

Poirier, M. R. Phase C Flygt Mixer Test Results. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/6161565.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
8

Lockwood, J. C. Active LFM Mixer Adaptive (ALMA) Beamforming. Defense Technical Information Center, 1994. http://dx.doi.org/10.21236/ada278160.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
9

Hu, Yalin, Dustin Tso, Sarina Kapai, and Marc Feldman. D-DMTD: Digital Dual Mixer Time Difference. Office of Scientific and Technical Information (OSTI), 2017. http://dx.doi.org/10.2172/1494164.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
10

Erian, Fadel F., O. Dennis Mullen, and Michael I. Kellogg. Experience and Operational Improvements, Mixer Pump Performance. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/15001239.

Texto completo
Los estilos APA, Harvard, Vancouver, ISO, etc.
También puede estar interesado en las bibliografías ampliadas sobre el tema "Pressure in the mixer" para tipos de fuentes particulares:
Artículos de revistas Tesis Libros
Ofrecemos descuentos en todos los planes premium para autores cuyas obras están incluidas en selecciones literarias temáticas. ¡Contáctenos para obtener un código promocional único!

Pasar a la bibliografía