Se connecter

Bibliographies thématiques / Grinding

Sommaire

Articles de revues
Thèses
Livres
Chapitres de livres
Actes de conférences
Rapports d'organisations

Littérature scientifique sur le sujet « Grinding »

Auteur : Grafiati

Publié le 4 juin 2021

Mis à jour le 25 juillet 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Grinding ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Grinding"

1

Choi, Young Jae, Kyung Hee Park, Yun Hyuck Hong, Kyeong Tae Kim, Seok Woo Lee, and Hon Jong Choi. "Design of Ultrasonic Horn for Grinding Using Finite Element Method." Advanced Materials Research 565 (September 2012): 135–41. http://dx.doi.org/10.4028/www.scientific.net/amr.565.135.

Texte intégral

Résumé :

In this paper, a ultrasonic horn, which can vibrate longitudinally with a frequency of 20㎑, was designed using finite element method (FEM). And the ultrasonic horn was fabricated for ultrasonic assisted grinding. To evaluate machining performance of the fabricated ultrasonic horn, grinding test was conducted on alumina ceramic (Al2O3). In the grinding test, grinding forces was measured and compared between the conventional grinding and the ultrasonic assisted grinding. The results showed that the grinding force in the ultrasonic grinding was lowered than the conventional grindign by 3~20%.

Styles APA, Harvard, Vancouver, ISO, etc.

2

Teshaboeva, Nodira Djuraevna. "INFLUENCE OF SURFACE - ACTIVE ADDITIVES ON THE PHYSICO - TECHNICAL PROPERTIES OF CEMENT." Eurasian Journal of Academic Research 1, no. 5 (2021): 8–14. https://doi.org/10.5281/zenodo.5176152.

Texte intégral

Résumé :

The article stipulates that at present, the grinding technology strives to increase the degree of grinding, improve the granulometric composition of cement and reduce the specific energy consumption for grinding processes, taking into account the extremely low efficiency of grinding plants. Therefore, when choosing the optimal dosages, the fineness of the grind of cements at various grindings was studied.

Styles APA, Harvard, Vancouver, ISO, etc.

3

Xue, Jin Xue, Bo Zhao, and Guo Fu Gao. "Study on the Plastic Removal Mechanism of Nano-ZrO₂ Ceramics by Ultrasonic Grinding." Key Engineering Materials 455 (December 2010): 686–89. http://dx.doi.org/10.4028/www.scientific.net/kem.455.686.

Texte intégral

Résumé :

The brittleness, plasticity, super-plasticity and the removal mechanisms of critical fragmentation of the nano ZrO2 ceramics were investigated. The formula of critical ductile grinding depth of the common engineering ceramics was inapplicable to the nano-ZrO2 ceramics. A new formula of critical ductile grinding depth of the nano ceramics was established. The ultrasonic vibration grinding experiments showed that the critical ductile grinding depth of the ceramics was 15μm by conventional grinding, but the increment of the critical ductile grinding depth was 60 percent by ultrasonic grinding. Th

Styles APA, Harvard, Vancouver, ISO, etc.

4

Ke, Xiao Long, Yin Biao Guo, and Chun Jin Wang. "Compensation and Experiment Research of Machining Error for Optical Aspheric Precision Grinding." Advanced Materials Research 797 (September 2013): 103–7. http://dx.doi.org/10.4028/www.scientific.net/amr.797.103.

Texte intégral

Résumé :

According to the demand of precision machining for optical aspheric lens, especially large scale optical aspheric lens, this paper presents an error compensation technique for precision grindging. Based on precision surface grinding machine (MGK7160), grating-type parallel grinding method is put forward to realize grinding paths planning for optical aspheric lens. In order to obtain surface metrology and evaluation after grinding, an on-machine measurement system is built. On the basis of compensation principle, machining error is separated to achieve error compensation. Grinding experiments a

Styles APA, Harvard, Vancouver, ISO, etc.

5

LÖNNBERG, BRUNO. "DEVELOPMENT OF WOOD GRINDING. 6. SIGNIFICANCE OF THE FRICTIONAL COEFFICIENT IN GRINDING OF SPRUCE WOOD." Cellulose Chemistry and Technology 58, no. 3-4 (2024): 419–24. http://dx.doi.org/10.35812/cellulosechemtechnol.2024.58.40.

Texte intégral

Résumé :

The purpose of this study was to clarify whether the wood grinding model – based on an energy balance for the grinding zone – would improve understanding of wood grinding for pulp. This study relied on previously obtained data by the Finnish Pulp and Paper Research Institute. The frictional coefficient (Pc/Pt) computed and the power-specific groundwood production (Ġw/Pt) were important x- and y- variables, respectively. Fresh spruce wood samples were ground by application of a laboratory grinder, where the stone surface speeds were 30, 15 and 7 m/s, respectively. The power-specific productivit

Styles APA, Harvard, Vancouver, ISO, etc.

6

Koltunov, I. I. "COMPARATIVE EVALUATION OF THE ERROR IN GRINDING OF BEARING RINGS." Izvestiya MGTU MAMI 6, no. 1 (2012): 218–23. http://dx.doi.org/10.17816/2074-0530-70005.

Texte intégral

Résumé :

The article considers the method of selecting of grinding mode at the operation design stage. The authors developed the mathematical model of process of grinding of a bearing ring. There are obtained numerical values of the error of machining of internal surfaces of bearing rings for different schemes grindings.

Styles APA, Harvard, Vancouver, ISO, etc.

7

Shen, Xiao Long, Cheng Gao Ren, Zhi Mou Pi, and Dai Li Zhu. "Experimental Investigation and Improvement of Dynamic Performance of High-Speed Grinding Machine." Advanced Materials Research 156-157 (October 2010): 1609–12. http://dx.doi.org/10.4028/www.scientific.net/amr.156-157.1609.

Texte intégral

Résumé :

Design of the dynamic performance of a machine tool is an effective approach to improve the machining accuracy. In this paper, the dynamic performance of high-speed cylindrical grinder has been studied systematically to improve the surface quality of high-speed grinding. According to the mode shape graphs and the power spectra, the vibration weak links and the main vibration sources of the prototype were found, and then the improvement measures were presented by designing the dynamic performance tests. The fact that the chatter of high-speed grinding can be suppressed to a certain extent with

Styles APA, Harvard, Vancouver, ISO, etc.

8

Rowe, Brian, Andrew Thomas, Jim Moruzzi, and David Allanson. "Grinding: Intelligent CNC grinding." Manufacturing Engineer 72, no. 5 (1993): 238. http://dx.doi.org/10.1049/me:19930105.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Meng, Minghui, Chuande Zhou, Zhongliang Lv, et al. "Research on a Method of Robot Grinding Force Tracking and Compensation Based on Deep Genetic Algorithm." Machines 11, no. 12 (2023): 1075. http://dx.doi.org/10.3390/machines11121075.

Texte intégral

Résumé :

In the grinding process of complex-shaped cast workpieces, discrepancies between the workpiece’s contours and their corresponding three-dimensional models frequently lead to deviations in the machining trajectory, resulting in instances of under-grinding or over-grinding. Addressing this challenge, this study introduces an advanced robotic grinding force automatic tracking technique, leveraging a combination of deep neural networks and genetic algorithms. Harnessing the capability of force sensing, our method dynamically recalibrates the grinding path, epitomizing truly flexible grinding. Init

Styles APA, Harvard, Vancouver, ISO, etc.

10

prasad, P. Durga, and B. Vivek. "Cryogenic Grinding." International Journal of Research Publication and Reviews 5, no. 3 (2024): 4137–40. http://dx.doi.org/10.55248/gengpi.5.0324.0795.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Thèses sur le sujet "Grinding"

1

Agahi, Maryam. "Grinding polycrystalline diamond using a diamond grinding wheel." Access electronically, 2006. http://www.library.uow.edu.au/adt-NWU/public/adt-NWU20061114.150854/index.html.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Brown, Austin (Austin R. ). "Axially force limited grinding spindle for robotic grinding." Thesis, Massachusetts Institute of Technology, 2018. http://hdl.handle.net/1721.1/119966.

Texte intégral

Résumé :

Thesis: S.B., Massachusetts Institute of Technology, Department of Mechanical Engineering, 2018.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (page 35).<br>Grinding and Polishing of small parts is often easily performed by human hands, yet is challenging to automate. The grinding and polishing process is best done using a force-control scheme, which human hands perform naturally. Heavy robotic arms, which favor a position-control scheme, are difficult to control precisely, and trajectory errors can cause excessive grinding force which leads to burning of the

Styles APA, Harvard, Vancouver, ISO, etc.

3

Curtis, David Thomas. "Point grinding and electrolytic point grinding of Udimet 720." Thesis, University of Birmingham, 2011. http://etheses.bham.ac.uk//id/eprint/2850/.

Texte intégral

Résumé :

The work within this Thesis is concerned with the manufacturing processes associated with the production of blade root mounting slots in aeroengine compressor and turbine discs. Typically slots are of dovetail or fir-tree geometry dependent on specific design requirements. The state of the art process across the industry is broaching however, despite achieving required geometrical tolerances and surface integrity for decades the process is not without its disadvantages. Primarily these include the inflexibility of the process, machine tool cost; size and cutting forces, complexity of tooling a

Styles APA, Harvard, Vancouver, ISO, etc.

4

Liu, Qiang. "Pattern recognition of grinding defects and assessment strategies of grinding." Thesis, University of Nottingham, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.417403.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Gannholm, Sören. "The mysterious grinding grooves." Thesis, Uppsala universitet, Institutionen för arkeologi och antik historia, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-423569.

Texte intégral

Résumé :

On the Island of Gotland, there is a phenomenon called grinding grooves, Sw. slipskåror. They occur in bedrock and boulders. About 3600 are known on the island today and having a length of less than half a meter to over one meter. Their purpose was unknown to the scientific community as well as their age. The directions of some 1250 Gotlandic grinding grooves, measured by the author shows there is a correlation to astronomical orientations. An archaeological excavation carried out by the author at a stone with grinding grooves gave some crucial results. The grinding groove phenomenon occurs in

Styles APA, Harvard, Vancouver, ISO, etc.

6

Yin, Guoxu. "Theoretical-Experimental Study of Fluid Delivery and Heat Management in Grinding." University of Toledo / OhioLINK, 2015. http://rave.ohiolink.edu/etdc/view?acc_num=toledo1438598110.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Hekman, Keith Alan. "Precision control in compliant grinding via depth-of-cut manipulation." Diss., Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/16627.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Alabed, Asmaa. "Knowledge management for grinding technology." Thesis, University of Huddersfield, 2011. http://eprints.hud.ac.uk/id/eprint/14575/.

Texte intégral

Résumé :

This thesis describes an investigation concerned with development of a grinding knowledge warehouse system (GKWS). Based on a study of previous work on knowledge management and technique for a selection of grinding conditions, the thesis proposes a novel methodology to deal with missing data in surface and cylindrical grinding using Genetic Programming. The GKWS provides a guided tool for users to support the decision-making process to provide suggestions for selecting grinding conditions using rule-based reasoning (RBR) and case-based reasoning (CBR) and it can learn from new and previous gri

Styles APA, Harvard, Vancouver, ISO, etc.

9

Massam, Mark. "Thermal characteristics of grinding fluids." Thesis, Cranfield University, 2008. http://dspace.lib.cranfield.ac.uk/handle/1826/7615.

Texte intégral

Résumé :

High Efficiency Deep Grinding (HEDG) combines high depths of cut, high grinding wheel speeds with high work piece feed rates to deliver a very high stock removal process that can produce components free of surface damage. High contact temperatures are a characteristic of the process and this produces a mass of hot grinding sparks being ejected from the grinding zone. Neat oil cutting fluids are typically used in HEDG due to their excellent lubricity, but the high grinding wheel speeds employed leads to high levels of highly volatile cutting fluid mist in the machine canopy. This mist can mix w

Styles APA, Harvard, Vancouver, ISO, etc.

10

Barlow, N. "High-rate grinding wheel design." Thesis, Liverpool John Moores University, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.380664.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Livres sur le sujet "Grinding"

1

Krar, Stephen F. Grinding technology. 2nd ed. Delmar Publishers, 1995.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Metzger, J. L. Superabrasive grinding. Butterworths, 1986.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Holz, Robert. Grinding handbook: Grinding with diamond and CBN. Ernst Winter, 1988.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Rowe, W. Brian. Modern Grinding Techniques. John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470882313.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Andrew, Colin. Creep feed grinding. Holt, Rinehart and Winston, 1985.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Lamson, S. T. Rail profile grinding. Canadian Institute of Guided Ground Transport, 1985.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Kibbe, Richard R. Grinding machine operations. Wiley, 1985.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Andrew, Colin. Creep feed grinding. Industrial Press, 1985.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Keviczky, L. Mathematics and Control Engineering of Grinding Technology: Ball Mill Grinding. Springer Netherlands, 1989.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

László, Keviczky. Mathematics and control engineering of grinding technology: Ball mill grinding. Kluwer Academic Publishers, 1989.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Chapitres de livres sur le sujet "Grinding"

1

Tönshoff, Hans Kurt, and Berend Denkena. "Grinding." In Lecture Notes in Production Engineering. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-33257-9_13.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Aurich, Jan C., Christian Effgen, and Benjamin Kirsch. "Grinding." In CIRP Encyclopedia of Production Engineering. Springer Berlin Heidelberg, 2017. http://dx.doi.org/10.1007/978-3-642-35950-7_6427-5.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Fritz Klocke, E. h., and Aaron Kuchie. "Grinding." In Manufacturing Processes 2. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-92259-9_6.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Aurich, Jan C., Christian Effgen, and Benjamin Kirsch. "Grinding." In CIRP Encyclopedia of Production Engineering. Springer Berlin Heidelberg, 2019. http://dx.doi.org/10.1007/978-3-662-53120-4_6427.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

5

Aurich, Jan, and Christian Effgen. "Grinding." In CIRP Encyclopedia of Production Engineering. Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-20617-7_6427.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Tadros, Tharwat. "Grinding." In Encyclopedia of Colloid and Interface Science. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-20665-8_101.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Hahn, Robert S. "Grinding." In Handbook of High-Speed Machining Technology. Springer US, 1985. http://dx.doi.org/10.1007/978-1-4684-6421-4_15.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Stone, Brian. "Grinding." In Chatter and Machine Tools. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-05236-6_5.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Gooch, Jan W. "Grinding." In Encyclopedic Dictionary of Polymers. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-6247-8_5674.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

Tschätsch, Heinz, and Anette Reichelt. "Grinding." In Applied Machining Technology. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-01007-1_13.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Grinding"

1

Ding, Ning, Hongwei Zhao, Junxin Zhang, Zhining Dong, and Kaiyu Zhang. "Research on grinding flow field and grinding fluid jet simulation optimization." In 3rd International Conference on Advanced Manufacturing Technology and Manufacturing Systems (ICAMTMS 2024), edited by Dailin Zhang and Ke Zhang. SPIE, 2024. http://dx.doi.org/10.1117/12.3039171.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Adam, K., K. A. Natarajan, I. Iwasaki, and S. C. Riemer. "Electrochemical Aspects of Grinding Media-Mineral Interaction in Sulfide ORE Grinding." In CORROSION 1985. NACE International, 1985. https://doi.org/10.5006/c1985-85362.

Texte intégral

Résumé :

Abstract Electrochemical interactions between grinding media and sulfide ores were studied through rest potential, combination potential and galvanic current measurements and polarization experiments using electrodes of grinding media materials and pyrrhotite under non-abrasive and abrasive conditions, and through the determination of ball wear data under different aeration conditions using marked ball grinding tests. Attempts were made to relate the corrosion currents, estimated from corrosive wear data in a laboratory ball mill, and the galvanic currents measured under non-abrasive and abras

Styles APA, Harvard, Vancouver, ISO, etc.

3

Latchireddi, Sanjeeva. "ENERGY EFFICIENT GRINDING MILLS." In 41º Ironmaking and Raw Materials Seminar and 12º Brazilian Symposium on Iron Ore. Editora Blucher, 2011. https://doi.org/10.5151/2594-357x-20524.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Tawakoli, Taghi, and Alireza Vesali. "Dynamic Behavior of Different Grinding Wheel Hub Material in High Efficiency Deep Grinding (HEDG)." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-86207.

Texte intégral

Résumé :

Machining accuracy and productivity of the grinding process can be mainly affected by the dynamic behavior of the different components participating in grinding process, e.g. grinding wheel, grinding machine and workpiece. Amongst others, design and material of the grinding wheels play a significant role in grinding performance. Therefore, controlling the dynamic behavior of the grinding wheel through an in-process monitoring and a post-process measurement seems an appropriate approach to optimize the grinding process, especially in high efficiency deep grinding (HEDG). This paper presents the

Styles APA, Harvard, Vancouver, ISO, etc.

5

Chen, Shuping, Mingshun Wang, Ying Huang, Xin Mao, and Hao Liu. "Control of grinding force in grinding diamond." In Optics East, edited by Bhaskaran Gopalakrishnan. SPIE, 2004. http://dx.doi.org/10.1117/12.571339.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Pei, Z. J., and Alan Strasbaugh. "Fine Grinding of Silicon Wafers: Grinding Marks." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-33458.

Texte intégral

Résumé :

In order to ensure high quality chips with high yield, the base material, semiconductor wafers (over 90% are silicon), must have superior quality. It is critically important to develop new manufacturing processes that allow silicon wafer manufacturers to produce high quality wafers at a reasonably low cost. A newly patented technology—fine grinding of etched silicon wafers—has great potential to manufacture very flat silicon wafers more cost-effectively. This paper presents an investigation of grinding marks in fine grinding. The investigation covers (1) nature of grinding marks, (2) factors t

Styles APA, Harvard, Vancouver, ISO, etc.

7

Chouhan, V., T. Ring, D. Smith, and G. Wu. "Study of Mechanical Grinding Effects on Niobium Surface." In Study of Mechanical Grinding Effects on Niobium Surface. US DOE, 2024. http://dx.doi.org/10.2172/2440014.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Lindsey, Kevin. "Tetraform grinding." In SIRA - DL tentative, edited by Lionel R. Baker. SPIE, 1992. http://dx.doi.org/10.1117/12.57751.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Siqueira, Bernardo, Harri Lehto, Mattias Astholm, and Ville Keikkala. "GRINDING TEST FOR IRON ORE TERTIARY GRINDING CIRCUIT." In 45º Redução / 16º Minério de Ferro / 3º Aglomeração. Editora Blucher, 2017. http://dx.doi.org/10.5151/2594-357x-27073.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

DENKENA, B. "Manufacturing of graded grinding wheels for flute grinding." In Material Forming. Materials Research Forum LLC, 2023. http://dx.doi.org/10.21741/9781644902479-132.

Texte intégral

Résumé :

Abstract. In this paper, two different methods for manufacturing of graded grinding wheels for two different metal bonds are presented. One method is based on the use of a mask and manual moulding and the other on a height-adjustable holder for moulding. For this purpose, a brittle and a ductile bronze bond are compared. The graded grinding wheels are fabricated through sintering with Field Assisted Sintering Technology (FAST). An analysis of the grain distribution is used to demonstrate the reproducibility of the manufacturing methodology. For analysis, light microscope images of cross-sectio

Styles APA, Harvard, Vancouver, ISO, etc.

Rapports d'organisations sur le sujet "Grinding"

1

T. Q. Nguyen. Crush Grinding. Office of Scientific and Technical Information (OSTI), 2005. http://dx.doi.org/10.2172/885174.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

2

Skone, Timothy J. Grinding Energy, Surface. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1509386.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

3

Skone, Timothy J. Grinding Energy, Underground. Office of Scientific and Technical Information (OSTI), 2013. http://dx.doi.org/10.2172/1509387.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

4

Gould, Melissa, Bill Bruce, and Vince Arnett. PR-186-113600-R01 Grinding Limits for Repair of SCC on Operating Pipelines. Pipeline Research Council International, Inc. (PRCI), 2018. http://dx.doi.org/10.55274/r0011473.

Texte intégral

Résumé :

Grinding is an accepted repair method for stress corrosion cracking (SCC) on buried pipelines. Grinding is routinely performed while the pipeline remains in service (i.e., pressurized and flowing). When grinding on a live pipeline, there is a risk that the pipe wall will rupture, either by reducing the wall thickness to below that which is appropriate for the operating pressure or by causing the cracking that is being removed to become 'critical' or unstable as the result of increased local stresses, etc. This project involved a review of current limits, practices, and previous work relevant t

Styles APA, Harvard, Vancouver, ISO, etc.

5

Skone, Timothy J. Biomass Grinding for Coal-Biomass Cofiring. Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1509243.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

6

Koyanaka, Shigeki, Hitoshi Ohya, and Shigehisa Endoh. Study on New grinding Technique to Simplify the Recycling Process of Scrap Electronics~Improvement of Selective Grinding Effect by Real-Time Control of the Grinding Conditions. SAE International, 2005. http://dx.doi.org/10.4271/2005-08-0187.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

7

Petruk, W., and M. M. Smith. Ore characteristics that affect breakage during grinding. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1988. http://dx.doi.org/10.4095/307083.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

8

Ashbaugh, F. A. CNC grinding of valve housing piston holes. Office of Scientific and Technical Information (OSTI), 1991. http://dx.doi.org/10.2172/5043278.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

9

Smith, S., H. Paul, and R. O. Scattergood. Precision diamond grinding of ceramics and glass. Office of Scientific and Technical Information (OSTI), 1988. http://dx.doi.org/10.2172/476640.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

10

McSpadden, SB. Optimizing the Grinding Process for Ceramic Materials. Office of Scientific and Technical Information (OSTI), 2001. http://dx.doi.org/10.2172/814599.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!