Bibliographies thématiques / Workers workstations

Sommaire

Articles de revues
Thèses
Livres
Chapitres de livres
Actes de conférences

Littérature scientifique sur le sujet « Workers workstations »

Auteur : Grafiati

Publié le 7 juin 2025

Mis à jour le 2 août 2025

Créez une référence correcte selon les styles APA, MLA, Chicago, Harvard et plusieurs autres

Choisissez une source :

Consultez les listes thématiques d’articles de revues, de livres, de thèses, de rapports de conférences et d’autres sources académiques sur le sujet « Workers workstations ».

À côté de chaque source dans la liste de références il y a un bouton « Ajouter à la bibliographie ». Cliquez sur ce bouton, et nous générerons automatiquement la référence bibliographique pour la source choisie selon votre style de citation préféré : APA, MLA, Harvard, Vancouver, Chicago, etc.

Vous pouvez aussi télécharger le texte intégral de la publication scolaire au format pdf et consulter son résumé en ligne lorsque ces informations sont inclues dans les métadonnées.

Articles de revues sur le sujet "Workers workstations"

Qian, Xiongwen. "A Heuristic-Mixed Genetic Algorithm for Type II Assembly Line Balancing with Multiple Workers in Workstations." Mathematical Problems in Engineering 2022 (March 27, 2022): 1–8. http://dx.doi.org/10.1155/2022/9954518.

Texte intégral

Résumé :

A type II line balancing problem with multiple workers in workstations (mALBP-II) is considered given a total number of workers, group workers, and tasks into workstations so as to minimize cycle time. Different from the manufacturing environment where the traditional assembly line balancing problem (ALBP) rises, manual or semimanual manufacturing enjoys much higher flexibility allowing multiple workers to perform the same set of tasks on workpieces in the same workstation in parallel. The freedom of specifying the number of workers in workstations makes the classic NP-hard ALBP even harder to

Styles APA, Harvard, Vancouver, ISO, etc.

Skelly, Donna L. "Assessment of computer workstations for compliance with ergonomic guidelines: A field study." Work 69, no. 3 (2021): 1019–26. http://dx.doi.org/10.3233/wor-213532.

Texte intégral

Résumé :

BACKGROUND: Computer workstation use is a risk factor for the development of musculoskeletal disorders. Governmental guidelines have been developed as a resource for workstation set-up to minimize this risk. The degree of worksite compliance with guidelines has not been examined. OBJECTIVE: The purpose of this study was to examine workstations using the VDT Workstation Checklist to determine compliance, and potential modifications. METHODS: Subjects were recruited from a variety of work settings in Erie, PA. Workstations were assessed with the worker present, using the VDT Workstation Checklis

Styles APA, Harvard, Vancouver, ISO, etc.

Khairunnissa, Lydwiza Firdananda Khairunnissa, Nunung Nurhasanah Nurhasanah, and Aprilia Tri Purwandari Purwandari. "<b>Standard Time Measurement and Optimization of the Number of Labor at Ruang Klambi Convection with the Approach of Work Sampling and Work Load Analysis (WLA) </b>." JURNAL TEKNIK INDUSTRI 15, no. 1 (2025): 17–30. https://doi.org/10.25105/jti.v15i1.19851.

Texte intégral

Résumé :

Several companies indirectly give excessive workloads that are considered to increase productivity. Besides workload, the work environment is important in encouraging employees to work optimally. Ruang Klambi Convection does not have a good work system due to the absence of an effective work schedule and poor work environment conditions. This can allow for overload or excessive workload on each worker. The primary motivation for this study is to improve work efficiency at Ruang Klambi Convection, which faces problems of excessive workload and a non-optimal work environment. Through the Work Sa

Styles APA, Harvard, Vancouver, ISO, etc.

Solen, I., A. Hasman, J. Troost, H. J. Tange, and M. J. van der Meijden. "Two Patient Care Information Systems in the Same Hospital: Beyond Technical Aspects." Methods of Information in Medicine 42, no. 04 (2003): 423–27. http://dx.doi.org/10.1055/s-0038-1634240.

Texte intégral

Résumé :

Summary Objectives: To compare two clinical workstations in one hospital with respect to technical, organizational, cultural and human factors. One clinical workstation was a GUI to the HIS. The other was an electronic patient record for stroke. Methods: Data were collected by means of in-depth interviews with end-users of both clinical workstations. The interviews were audio taped and transcribed for analysis. Results: End users assessed both clinical workstations as user friendly. Coordination between health care workers was perceived to be enhanced. However, in both situations poor communic

Styles APA, Harvard, Vancouver, ISO, etc.

Yao, Wei Xin. "Study on Line Balancing for a Type of Lamp Assembling." Applied Mechanics and Materials 63-64 (June 2011): 751–54. http://dx.doi.org/10.4028/www.scientific.net/amm.63-64.751.

Texte intégral

Résumé :

This paper applied stopwatch to measure the work time of workstations on lamp assembling line. It studied issues effecting line production capability such as bottleneck workstations and superfluous capability. To overcome these shortcomings this paper suggests new line balancing schema. The schema includes reallocation of the work content, adjustment of the equipment and workers of each workstation. This improvement saves extra work shifts and reduces labor cost.

Styles APA, Harvard, Vancouver, ISO, etc.

Shikdar, A. A., and M. A. Al-Hadhrami. "Operator Performance and Satisfaction in an Ergonomically Designed Assembly Workstation." Journal of Engineering Research [TJER] 2, no. 1 (2005): 69. http://dx.doi.org/10.24200/tjer.vol2iss1pp69-76.

Texte intégral

Résumé :

The objective of this study was to investigate the effects on operator performance and satisfaction of an ergonomically designed workstation for performing a repetitive industrial assembly task. Experiments were conducted in a company with industrial workers using existing and newly developed workstations. Operator performance on the ergonomically designed workstation was 27% higher compared to the existing non-ergonomically designed workstation. Worker satisfaction score was also improved by 41% in the ergonomically designed workstation condition. The new workstation for a repetitive assembly

Styles APA, Harvard, Vancouver, ISO, etc.

Renaud, Lidewij, Maaike Huysmans, Hidde van der Ploeg, Erwin Speklé, and Allard van der Beek. "Long-Term Access to Sit-Stand Workstations in a Large Office Population: User Profiles Reveal Differences in Sitting Time and Perceptions." International Journal of Environmental Research and Public Health 15, no. 9 (2018): 2019. http://dx.doi.org/10.3390/ijerph15092019.

Texte intégral

Résumé :

Background: To decrease the detrimental health effects of prolonged sitting, the implementation of sit-stand workstations is a commonly used intervention for office workers. Most studies on this topic evaluated the effects of newly introduced sit-stand workstations. The objective of this study was to determine how often and how long the standing option is used and how the use of sit-stand workstations is perceived in office workers with long-term access to these workstations. Methods: Using an online survey, 1098 office employees responded to questions about frequency of usage of the sit-stand

Styles APA, Harvard, Vancouver, ISO, etc.

Smagowska, Bożena. "Noise at Workplaces in the Call Center." Archives of Acoustics 35, no. 2 (2010): 253–64. http://dx.doi.org/10.2478/v10168-010-0024-2.

Texte intégral

Résumé :

AbstractIn the last years the number of new forms of workplaces, such as call centers, increases. It is defined as a workstation where the basic tasks of a worker are carried out with the use of a phone and a computer. According to statistics, about 1.3-4% of workers are employed in call centers in the European countries. The noise is one of the harmful and annoying hazards of call center workstations. The paper presents the noise sources in call center rooms, assessment criteria of noise and results of noise measurements in call center workstations. The results of measurements show that the n

Styles APA, Harvard, Vancouver, ISO, etc.

Davis, Kermit G., and Susan E. Kotowski. "Stand Up and Move; Your Musculoskeletal Health Depends on It." Ergonomics in Design: The Quarterly of Human Factors Applications 23, no. 3 (2015): 9–13. http://dx.doi.org/10.1177/1064804615588853.

Texte intégral

Résumé :

The new trend in office ergonomics is installing dynamic workstations that include sit-to-stand tables, treadmills, stationary bicycles, and exercise balls. The question is whether it is worth the investment to try to reduce musculoskeletal pain via these dynamic workstations. Postural change is good, but the most effective workstation seems to be the sit-to-stand table with respect to reducing discomfort suffered by office workers. Treadmills and cycle workstations do have the ability to increase energy expenditure and heart rate and thus are potentially beneficial in addressing obesity that

Styles APA, Harvard, Vancouver, ISO, etc.

Darmawan, Vertic Eridani Budi, Sofiandi Dwi Indra, Aisyah Larasati, Cahya Nugraha, and Muhammad Fathullah. "A Postural Risk Assessment of Steamer Production Workers Using RULA and REBA." International Journal of Industrial Engineering and Engineering Management 6, no. 1 (2024): 1–11. http://dx.doi.org/10.24002/ijieem.v6i1.7322.

Texte intégral

Résumé :

The present study examined the work posture of the worker as a basis for correcting bad postures in the workplace. Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA) methods are applied to evaluate the postural risk assessment which is related to musculoskeletal disorders (MSDs). There are five workers at UD. Sidoarjo National Ship is chosen to analyze the risk posture for this study. Based on observations and calculations at UD. Sidorajo National Ship, it was found that workers were still using less than optimal methods or not supported by ergonomic workstations. The s

Styles APA, Harvard, Vancouver, ISO, etc.

Plus de sources

Thèses sur le sujet "Workers workstations"

Van, Vledder Nicole. "An ergonomic intervention : the effect of a chair and computer screen height adjustment on musculoskeletal pain and sitting comfort in office workers." Thesis, Stellenbosch : Stellenbosch University, 2015. http://hdl.handle.net/10019.1/96865.

Texte intégral

Résumé :

Thesis (MScPhysio)--Stellenbosch University, 2015.<br>ENGLISH ABSTRACT: Aims: To assess the effect of a vertical height adjustment of the chair and visual display unit (VDU) on work related upper quadrant musculoskeletal pain (WRUQMP) and sitting comfort in computer users. The upper quadrant refers to the occiput, cervical and upper thoracic spine including the clavicles and scapulae. Methods: An N=1 study was conducted using the ABC design whereby an ergonomic workstation adjustment, of VDU and chair height, was compared to the subject’s usual workstation settings. Pain and sitting comfort

Styles APA, Harvard, Vancouver, ISO, etc.

Sharp, L. Kathryn. "Early Literacy Workstations." Digital Commons @ East Tennessee State University, 2011. https://dc.etsu.edu/etsu-works/4301.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Sharp, L. Kathryn, and M. White. "Literacy Workstations: Making Them Work in Your Classroom! (It IS Possible!)." Digital Commons @ East Tennessee State University, 2011. https://dc.etsu.edu/etsu-works/4280.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Trång, Christina. "Improving work conditions formanufacturing workers : A study at a module house manufacturer." Thesis, Luleå tekniska universitet, Institutionen för ekonomi, teknik och samhälle, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-65919.

Texte intégral

Résumé :

This thesis is the final component of the Master of Science degree within Industrial design engineering at Luleå University of Technology. The purpose of the project was to analyze an issue and developing a conceptual solution based on scientific knowledge within the field. The project was carried out at SmålandsVillan's production facility in Sundsvall which produces module bungalows and condominiums. The objective of the project was to define and analyze why the company struggled with sick leaves among the operators and the aim was to develop a solution to ease the strained work situation. W

Styles APA, Harvard, Vancouver, ISO, etc.

Goksoy, Eda. "Disassembly Line Balancing Problem With Fixed Number Of Workstations And Finite Supply." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12612060/index.pdf.

Texte intégral

Résumé :

In this thesis, we consider a Disassembly Line Balancing Problem (DLBP) with fixed number of workstations. We aim to maximize the total value of the recovered parts. We assume that there is a limited supply for the products to be disassembled. Different components can be obtained by disassembling different units of the product. Our aim is to assign the tasks to the workstations of the disassembly line so as to maximize the total value of the recovered parts. We present several upper and one lower bounding procedure. The results of our computational study have revealed the satisfactory behavi

Styles APA, Harvard, Vancouver, ISO, etc.

Saggu, Rajinder Kaur. "Effect of a chair and computer screen height adjustment on the neck and upper back musculoskeletal symptoms in an office worker." Thesis, Stellenbosch : Stellenbosch University, 2015. http://hdl.handle.net/10019.1/96971.

Texte intégral

Résumé :

Thesis (MScPhysio)--Stellenbosch University, 2015.<br>ENGLISH ABSTRACT: Aims: To assess the effect of a chair and computer screen height adjustment on the neck and upper back musculoskeletal symptoms in an office worker. Methods: An N=1 study was conducted using the ABC design. Ethics approval was obtained for the study and the participant provided informed written consent. The participant was assessed over three four week phases as she performed her habitual computer work. The outcome measures assessed during the three phases were the pain intensity and perceived sitting comfort. The three p

Styles APA, Harvard, Vancouver, ISO, etc.

Bond, Lisa. "Effekt av höj- och sänkbara skrivbord efter arbetstid : Påverkas fysisk aktivitet samt skattning av fysiska besvär efter arbetstid hos kontorsanställda som använt ett höj och sänkbart skrivbord." Thesis, Högskolan i Gävle, Avdelningen för arbets- och folkhälsovetenskap, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-21590.

Texte intégral

Résumé :

Background: Several studies show that sedentary is harmful to humans. Despite this, the degree of sedentary increases and 75% of the total time of sedentary is at the workplace. A common way to reduce sedentary is to introduce sit-stand workstations. Studies show that this gives good effects during working hours but few have studied what those providing for effects after working hours. Objective: Study office workers to see if there is a difference in the frequency and duration of physical activity and estimation of physical problems after a working day if they were sedentary or varied its wor

Styles APA, Harvard, Vancouver, ISO, etc.

"Feasibility of Using Prompt to Reduce Sedentary Behavior in Office Workers with Sit-Stand Workstations: A randomized Cross-Over Trial." Master's thesis, 2018. http://hdl.handle.net/2286/R.I.49333.

Texte intégral

Résumé :

abstract: The purpose of this study was to examine the feasibility and preliminary efficacy of a theory-driven and a atheoretical reminder point-of-choice (PoC) prompt interventions on reducing workplace sedentary behavior in office workers with self-reported low usage (<4 hours per day) of their sit-stand workstations in the standing position. The design of this study was a cross-over trial including randomization into either the theory-driven or atheoertical reminder condition, after completion of a no prompt control condition. Participants (N=19) included full-time, primarily female, Caucas

Styles APA, Harvard, Vancouver, ISO, etc.

Livres sur le sujet "Workers workstations"

Foster, Thompson Lori, ed. Computer supported cooperative work: Issues and implications for workers, organizations, and human resource management. Sage Publications, 2001.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Jones. How workstation design can affect a workers health. SIHE, 1994.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Thompson, Lori Lea Foster, and Michael D. Coovert. Computer Supported Cooperative Work: Issues and Implications for Workers, Organizations, and Human Resource Management. SAGE Publications, Incorporated, 2012.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Coovert, Michael D., and Lori L. (Lea) Foster Thompson. Computer Supported Cooperative Work: Issues and Implications for Workers, Organizations, and Human Resource Management (Advanced Topics in Organizational Behavior series). Sage Publications, Inc, 2000.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Trouver le texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Chapitres de livres sur le sujet "Workers workstations"

Nedohe, Khumbuzile, Khumbulani Mpofu, and Olasumbo Makinde. "Assessment of Ergonomics Risk Experienced by Welding Workers in a Rail Component Manufacturing Organization." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-18326-3_23.

Texte intégral

Résumé :

AbstractThe various types of welding workstation designs used in a rail component manufacturing system environment have drawn the attention of industrial engineers to the safety and efficiency of the workers during welding operations. Welding operations are carried out using several posture configurations, which have a negative physical ergonomic impact on the workers, especially in manual welding processes. This empirical research investigates the ergonomics conditions of welding workplaces with the aim of ascertaining the disorders that may be associated with working posture during welding o

Styles APA, Harvard, Vancouver, ISO, etc.

Teixeira, Edson S. M., and Maria Lucia L. R. Okimoto. "Industrial Manufacturing Workstations Suitability for People with Disabilities: The Perception of Workers." In Advances in Ergonomics in Design. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-60582-1_49.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Tosi, Francesca, and Mattia Pistolesi. "Ergonomics Evaluation of Workstations for Mechanical Engineering Companies with Particular Attention to Older Workers." In Advances in Intelligent Systems and Computing. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-96071-5_44.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Gomez, Rafael, Morley Gunderson, and Noah M. Meltz. "From Playstations to Workstations: Young Workers and the Experience-Good Model of Union Membership." In Unions in the 21st Century. Palgrave Macmillan UK, 2004. http://dx.doi.org/10.1057/9780230524583_17.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Miranda-Rodriguez, Brenda, Luis Saenz-Julcamoro, Edgardo Carvallo-Munar, Claudia Leon-Chavarri, and Carlos Raymundo. "Ergonomic Method for Redesigning Workstations to Reduce Musculoskeletal Disorders Among Workers in Textile SMEs." In Advances in Intelligent Systems and Computing. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-68017-6_122.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Micheletti Cremasco, M., A. Giustetto, R. Castellone, M. P. Cavatorta, and S. Spada. "Anthropometry for Ergonomic Design of Workstations: The Influence of Age and Geographical Area on Workers Variability." In Advances in Intelligent Systems and Computing. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-96065-4_62.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Anh, Le Thi My, and Anh Phuong Ngo. "An Integrated Work Design Factors to Improve the Sustainable Manufacturing Performance of Garment Quality Inspection." In Lecture Notes in Mechanical Engineering. Springer Nature Switzerland, 2025. https://doi.org/10.1007/978-3-031-93891-7_70.

Texte intégral

Résumé :

Abstract This study examines the connection between sustainable manufacturing and ergonomic work design. It focuses on the impact of work-related musculoskeletal disorders (WMSDs) among garment workers in a Vietnamese SME factory who are responsible for quality inspection. The study uses the Rapid Entire Body Assessment technique and discovers medium to high-risk levels of WMSDs, indicating the need for comprehensive ergonomic intervention. The proposed ergonomic solutions are tailored to the anthropometric nuances of this demographic and include redesigning workstations and enhancing work met

Styles APA, Harvard, Vancouver, ISO, etc.

Martin, Patrick, Bruno Daille-Lefèvre, Xavier Godot, and Jelena Petronijevic. "Workstation Design Centered to Workers’ Safe Use." In Advances on Mechanics, Design Engineering and Manufacturing IV. Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-031-15928-2_7.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Mallampalli, Krishna Chaitanya. "Ergonomic Assessment and Workstation Design for Women Workers in Cashew Factory." In Design in the Era of Industry 4.0, Volume 1. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-0293-4_4.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Murarka, Pallavi, and Manjit Kaur Chauhan. "Assessment of Work Posture of CFA Workers and Designing a New Workstation." In Advances in Industrial Design. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-80829-7_14.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Actes de conférences sur le sujet "Workers workstations"

Erliana, Cut Ita, Iskandar Hasanuddin, Yuwaldi Away, Raja Ariffin Raja Ghazilla, and Rajagukguk Rizky Maisaroh. "Incorporating Time and Motion Analysis into Modular Arrangement of Predetermined Time Standard." In International Conference on Experimental and Computational Mechanic in Engineering 2023. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-tojl9e.

Texte intégral

Résumé :

Micro, small, and medium enterprises (MSMEs) play a crucial role in driving economic growth and absorbing labor. MSMEs' contribution to the Indonesian economy includes their ability to absorb 97% of the total workforce available. Tofu is one of Indonesia's micro, small, and medium enterprises. According to previous research results on posture assessment in the filtering workstation, the assessment workstation's working posture received a score of 13, indicating a very high risk of musculoskeletal disorders (MSDs) and necessitating immediate corrective action. This research aims to analyze work

Styles APA, Harvard, Vancouver, ISO, etc.

Colim, Ana, Rita Morgado, Nuno Sousa, et al. "The transformation of manual workstations with collaborative robotics: the workers' perceptions." In Human Systems Engineering and Design (IHSED 2021) Future Trends and Applications. AHFE International, 2021. http://dx.doi.org/10.54941/ahfe1001172.

Texte intégral

Résumé :

The human factors constitute the focal point of the future Industry 5.0. The introduction of novel technologies (as collaborative robotics) in real-industry scenarios brings challenges related to the acceptance and confidence by the human-workers. The main goal of the current paper is to share the workers’ perceptions about robotics, during a real experience developed in a manufacturing industry. Regarding assess the workers’ perceptions (n = 14 assembly workers), a questionnaire was developed and applied. The elaboration of this questionnaire was based on the bibliographic review of previous

Styles APA, Harvard, Vancouver, ISO, etc.

Colim, Ana, Estela Bicho, André Cardoso, et al. "Ergonomics and Collaborative Robotics: The synergy to prevent workload in industrial assembly tasks." In 12th International Conference on Human Interaction and Emerging Technologies (IHIET 2024). AHFE International, 2024. http://dx.doi.org/10.54941/ahfe1005459.

Texte intégral

Résumé :

The synergy between Ergonomics and Collaborative Robotics represents a crucial and emergent framework to achieve innovative and human-centered assembly workstations. Among the various I4.0 technologies, Human-Robot Collaboration (HRC) has emerged as a cutting-edge solution to address ergonomic challenges while enhancing manufacturing productivity. Despite this potential, there is a significant gap in empirical studies on the implementation of these technologies, particularly in the context of integrating ergonomic requirements. This study aims to present real-world applications of HRC in assem

Styles APA, Harvard, Vancouver, ISO, etc.

Rossato, Chiara, Valeria Orso, Patrik Pluchino, and Luciano Gamberini. "Adaptive Assembly Workstations and cobots: a qualitative assessment involving senior and adult workers." In ECCE 2021: European Conference on Cognitive Ergonomics 2021. ACM, 2021. http://dx.doi.org/10.1145/3452853.3452883.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Shin, Jinho, Minho Lee, and James R. Morrison. "On the Optimization Of Cycle Time in Assembly Lines with Parallel Workstations and Tasks Requiring Multiple Workers." In 2019 IEEE 15th International Conference on Automation Science and Engineering (CASE). IEEE, 2019. http://dx.doi.org/10.1109/coase.2019.8842915.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Chaiklieng, Sunisa. "P-25 Assessment of lighting intensity at workstations and incidence of shoulder pain among electronic manufacturing workers." In 28th International Symposium on Epidemiology in Occupational Health (EPICOH 2021). BMJ Publishing Group Ltd, 2021. http://dx.doi.org/10.1136/oem-2021-epi.167.

Texte intégral

Styles APA, Harvard, Vancouver, ISO, etc.

Yetkin, Busra, and Berna Ulutas. "Application of Digital Human Modelling and Factorial Experiments for Workstation Optimization." In 15th International Conference on Applied Human Factors and Ergonomics (AHFE 2024). AHFE International, 2024. http://dx.doi.org/10.54941/ahfe1005019.

Texte intégral

Résumé :

Human-Robot Collaboration (HRC) empower manufacturing workstations by enabling ergonomic and safe working conditions for humans. To design successful HRC, operational and ergonomics aspects must be considered. In this paper, a new methodology is developed to identify factors that can impact physical workload of workers’ performance in a HRC environment. The proposed approach is based on Digital Human Modelling (DHM) and Factorial Design of Experiments. DHM enables to design and evaluate a large number of design configurations with respect to multiple performance measures. However, most of mode

Styles APA, Harvard, Vancouver, ISO, etc.

Cibrario, Valerio, Manuela Vargas Gonzalez, Cesare Fantuzzi, et al. "Assessing Ergonomics on Cobot for an Optimized Integrated Solution in Early Phase of Product and Process Design." In 14th International Conference on Applied Human Factors and Ergonomics (AHFE 2023). AHFE International, 2023. http://dx.doi.org/10.54941/ahfe1003355.

Texte intégral

Résumé :

The design goal for Human-Robot collaboration is combining the repeatability and productivity of automated systems with the flexibility of the operators [1]. One main interest is for cobots to take over complex and physically demanding assembly tasks, reducing the biomechanical workload on workers and increasing product quality. However, as reported by several authors [1-3], the introduction of cobots is not straightforward and should be thoroughly investigated and planned to avoid higher mental stress on workers and a decrease in efficiency. In this respect, Digital Human Modelling can suppor

Styles APA, Harvard, Vancouver, ISO, etc.

Chaiklieng, Sunisa. "Effectiveness of ergonomics management on risk reduction of work-related musculoskeletal disorders among textile export industrial workers." In 14th International Conference on Applied Human Factors and Ergonomics (AHFE 2023). AHFE International, 2023. http://dx.doi.org/10.54941/ahfe1003637.

Texte intégral

Résumé :

This quasi-experimental study aimed to measure the effectiveness of ergonomics management on risk reduction of work-related musculoskeletal disorders (WMSDs). The study was conducted among industrial workers in one small textile-export enterprise. The 13 workers who met the inclusion criteria were found by screening with a risk matrix of WMSDs and had a risk outcome of WMSDs which was at least at the moderate level (level 3 from five levels). The participants were subjected to an ergonomics program according to the risk levels of WMSDs and the effectiveness was measured by individual compariso

Styles APA, Harvard, Vancouver, ISO, etc.

Vargas Puentes, Liliana, and Camilo José Peña Lapeira. "Home-At-Work and Occupational Risk Intervention During The Covid-19 Pandemic." In 8th International Conference on Human Interaction and Emerging Technologies. AHFE International, 2022. http://dx.doi.org/10.54941/ahfe1002794.

Texte intégral

Résumé :

The pandemic caused by COVID-19 significantly affected small and medium-sized entrepreneurs and their workers in Colombia, who, in order to give continuity to their organizations and comply with legal requirements during the health emergency, turned their homes into workspaces, giving rise to the modality of "home-at-work”, which differs from the usual teleworking model.This new context required that organizations implemented strategies for managing occupational risks which arose in households whose workers adopted the home-working mode and had to share family, personal, and/or school spaces a

Styles APA, Harvard, Vancouver, ISO, etc.

Nous offrons des réductions sur tous les plans premium pour les auteurs dont les œuvres sont incluses dans des sélections littéraires thématiques. Contactez-nous pour obtenir un code promo unique!