Gotowe bibliografie tematyczne / Additional plate

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Additional plate”

Autor: Grafiati
Data publikacji: 2 czerwca 2025
Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Additional plate”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Additional plate"

1

Rusimov, Lyubomir. "Dual plate fixation of unstable proximal humerus fractures: A Narrative review." Bulgarian Society of Medical Sciences Journal 7 (May 19, 2025): e144938. https://doi.org/10.3897/bsms.7.144938.

Pełny tekst źródła
Streszczenie:
Introduction: Medial column instability has been identified as a key factor contributing to the increased failure rates observed after locking plate (LP) fixation for unstable proximal humerus fractures (PHFs). Recent studies have reported promising biomechanical and clinical outcomes with the use of LP fixation augmented by an additional plate for medial column stabilization. The current article provides an overview of the available clinical literature for dual plate fixation of unstable PHFs with medial column instability. Materials and methods: For the arrangement of this narrative, non-sys
Style APA, Harvard, Vancouver, ISO itp.
2

KUMAR, ABHINAV, S. K. PANDA, and RAJESH KUMAR. "DYNAMIC INSTABILITY OF COMPOSITE SKEW PLATES USING BOUNDARY CHARACTERISTIC ORTHOGONAL POLYNOMIALS." International Journal of Applied Mechanics 06, no. 06 (2014): 1450078. http://dx.doi.org/10.1142/s1758825114500781.

Pełny tekst źródła
Streszczenie:
Dynamic instability analysis of laminated composite skew plate for different skew angles subjected to different type of linearly varying in-plane loadings is investigated. The analysis also includes the instability of skew plate under uniform bi-axial in-plane loading. The skew plate structural model is based on higher order shear deformation theory (HSDT), which accurately predicts the numerical results for thick skew plate. The total energy functional is derived for the skew plates from total potential energy and kinetic energy of the plate. The strain energy which is the part of total poten
Style APA, Harvard, Vancouver, ISO itp.
3

Burks, Jesse B., James S. Comerford, and Alexandra Buk. "Additional Uses of the DePuy TiMAX Spider Plate." Journal of the American Podiatric Medical Association 93, no. 5 (2003): 406–7. http://dx.doi.org/10.7547/87507315-93-5-406.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Surianinov, Mykola, and Irina Korneeva. "EXPERIMENTAL STUDIES OF SERIAL REINFORCED CONCRETE PAG SLAB WITH ADDITIONAL STEEL FIBER REINFORCEMENT." Spatial development, no. 5 (November 24, 2023): 201–11. http://dx.doi.org/10.32347/2786-7269.2023.5.201-211.

Pełny tekst źródła
Streszczenie:
Thus, in laboratory conditions, experimental studies of the bearing capacity and crack resistance of a serial PAG plate with additional steel fiber reinforcement in the amount of 1% were carried out. In accordance with the regulatory documents in force in Ukraine, one of two possible load schemes was considered ― when loaded by a concentrated force applied to the cantilever part of the slab. The plate was tested on a specially made stand consisting of four support racks connected in pairs by beams on which the plate rested. The load was applied across the width of the slab in steps of 0.04 fro
Style APA, Harvard, Vancouver, ISO itp.
5

Voropay, Alexey, and Pavel Yegorov. "THE INFLUENCE OF MASS AND INERTIAL CHARACTERISTICS OF AN ADDITIONAL VISCOELASTIC SUPPORT IN THE NONSTATIONARY DEFORMING OF A RECTANGULAR PLATE." Bulletin of the National Technical University "KhPI". Series: Mathematical modeling in engineering and technologies, no. 1 (March 5, 2021): 15–23. http://dx.doi.org/10.20998/2222-0631.2020.01.02.

Pełny tekst źródła
Streszczenie:
The nonstationary loading of a mechanical system consisting of a rectangular elastic isotropic plate and an additional viscoelastic support is investigated. The main attention is devoted to taking into account the mass and inertial characteristics of the additional viscoelastic support during modeling. As the main object, to which an additional support is attached, a plate of medium thickness within the framework of Timoshenko's hypotheses is considered. Since the focus of the paper is on the influence of the additional support, the plate itself is assumed to be hinged for simplicity of its mo
Style APA, Harvard, Vancouver, ISO itp.
6

Prasetyo, Ari, Eki Rovianto, Dimas Adika, et al. "The Effect of Additional Baffle Plates on Double-Stage Gravitational Water Vortex Turbine." Civil Engineering Journal 11, no. 2 (2025): 580–95. https://doi.org/10.28991/cej-2025-011-02-011.

Pełny tekst źródła
Streszczenie:
A Gravitational Vortex Water Turbine (GWVT) is an appropriate device to harness the kinetic energy of water to convert it into rotational mechanical energy in low-head. The water flow is directed into a circular basin, which can produce a vortex and can rotate the turbine blades. Turbine performance is influenced by the shape of the blade, so an optimal blade shape is required. Turbine performance is influenced by the shape of the blades, which can rotate optimally. This study aims to determine the effect of adding baffle plates in the blade on the performance of two-stage GWVT using experimen
Style APA, Harvard, Vancouver, ISO itp.
7

Young, T. H., and M. Y. Wu. "Dynamic Stability of Disks With Periodically Varying Spin Rates Subjected to Stationary In-Plane Edge Loads." Journal of Applied Mechanics 71, no. 4 (2004): 450–58. http://dx.doi.org/10.1115/1.1753267.

Pełny tekst źródła
Streszczenie:
This paper presents an analysis of dynamic stability of an annular plate with a periodically varying spin rate subjected to a stationary in-plane edge load. The spin rate of the plate is characterized as the sum of a constant speed and a small, periodic perturbation. Due to this periodically varying spin rate, the plate may bring about parametric instability. In this work, the initial stress distributions caused by the periodically varying spin rate and the in-plane edge load are analyzed first. The finite element method is applied then to yield the discretized equations of motion. Finally, th
Style APA, Harvard, Vancouver, ISO itp.
8

Zhang, Hao, Jiantao Li, Jianfeng Zhou, et al. "Finite Element Analysis of Different Double-Plate Angles in the Treatment of the Femoral Shaft Nonunion with No Cortical Support opposite the Primary Lateral Plate." BioMed Research International 2018 (July 31, 2018): 1–8. http://dx.doi.org/10.1155/2018/3267107.

Pełny tekst źródła
Streszczenie:
Objectives. We evaluated the biomechanical outcome of different plate fixation strategies (the single plate construct, 45° double-plate construct, 90° double-plate construct, 135° double-plate construct, and 180° double-plate construct) used for the fixation of the femoral shaft nonunion with no cortical support opposite the primary lateral plate. This may help surgeons choose the optimal therapy to the femoral shaft nonunion. Methods. The femoral shaft nonunion with no medial support and the models of lateral plate and medial plate was constructed in 3-matic software and UG-NX software, respe
Style APA, Harvard, Vancouver, ISO itp.
9

Yang, Xiuying, Yuzhuo Wang, Yongxin Liu, and Zhenyu Wei. "Experimental Study and Numerical Simulation on Mechanical Properties of the Bottom Plate in the Assembled Composite Slab with Additional Steel Trusses." Advances in Civil Engineering 2021 (September 29, 2021): 1–8. http://dx.doi.org/10.1155/2021/7240994.

Pełny tekst źródła
Streszczenie:
The composite slab with steel trusses is composed of precast bottom plate and cast-in-place concrete. In engineering applications, cracks often appear in the bottom plate before casting the upper concrete, which even leads to the failure of the composite slab. To improve the crack resistance of the slab, a composite slab with additional steel trusses is proposed; that is, on the basis of the original longitudinal steel trusses, the transverse steel trusses are added. Static test and numerical analysis were carried out on the bottom plate of the new type of composite slab with the additional tr
Style APA, Harvard, Vancouver, ISO itp.
10

Du, Yipeng, Yongbo Shao, and Ling Zhong. "Repairing damaged steel plate shear wall with additional ribs." Structures 41 (July 2022): 222–34. http://dx.doi.org/10.1016/j.istruc.2022.05.020.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Additional plate"

1

Воропай, Алексей Валериевич, П. А. Егоров та Евгений Сергеевич Малахов. "Нестационарное деформирование балок и пластин при наличии дополнительных опор и ребер жесткости". Thesis, Харьковский национальный университет им. В. Н. Каразина, 2017. http://repository.kpi.kharkov.ua/handle/KhPI-Press/41156.

Pełny tekst źródła
Streszczenie:
Non-stationary vibrations of complex mechanical systems that can be considered in the form of beams and plates with various mechanical features are investigated. Modeling of features (concentrated masses, additional supports and stiffeners) is made by replacing their influence with non-stationary concentrated forces (reactions), which are determined from the solution of Volterra integral equations using Tikhonov's regularizing algorithm.
Style APA, Harvard, Vancouver, ISO itp.
2

WATANABE, Katsuhiko, Hideyuki AZEGAMI, and Yasuo HIRANO. "An Evaluation of the Fracture Resistance of a Stably Growing Crack by Crack Energy Density (2nd Report, Application to a Ductile Crack in Thin Plate)." 日本機械学会, 1986. http://hdl.handle.net/2237/12160.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

渡辺, 勝彦, Katsuhiko Watanabe, 秀幸 畔上, Hideyuki Azegami, 八州男 平野 та Yasuo Hirano. "き裂エネルギ密度による安定成長き裂の破壊抵抗評価 (第2報, 薄板延性き裂への適用)". 日本機械学会, 1986. http://hdl.handle.net/2237/7269.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Sandgren, Østenstad Jofrid. "Kyrkohöjden - En Plats att Vara." Thesis, KTH, Arkitektur, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-280722.

Pełny tekst źródła
Streszczenie:
Projektets mål är att aktivisera området kring Høvik kirke i Norge. Utgångspunkten är att förbättra och vidareutveckla existerande kvaliteter på kyrkotomten, samt att utgå ifrån dessa i skapandet av nya element. Projektet syftar till att omskapa kyrkohöjden till en trevlig plats att vara på, för kyrkans besökare såväl som för andra. Viktiga fokusområden är kyrkohöjdens roll som lokalt kulturcentrum, kyrkobyggnaden som lokal identitetsmarkör och landmärke, och historiska sammanhang i närområdet. Projektet har tre huvudkomponenter: park, församlingshem, och en ny tillbyggnad. Kyrkohöjden är i da
Style APA, Harvard, Vancouver, ISO itp.
5

Rawson, Helen C. "Treasures of the University : an examination of the identification, presentation and responses to artefacts of significance at the University of St Andrews, from 1410 to the mid-19th century, with an additional consideration of the development of the portrait collection to the early 21st century." Thesis, University of St Andrews, 2010. http://hdl.handle.net/10023/990.

Pełny tekst źródła
Streszczenie:
Since its foundation between 1410 and 1414 the University of St Andrews has acquired what can be considered to be ‘artefacts of significance’. This somewhat nebulous phrase is used to denote items that have, for a variety of reasons, been deemed to have some special import by the University, and have been displayed or otherwise presented in a context in which this status has been made apparent. The types of artefacts in which particular meaning has been vested during the centuries under consideration include items of silver and gold (including the maces, sacramental vessels of the Collegiate C
Style APA, Harvard, Vancouver, ISO itp.
6

Thompson, Ronald H. "Plane frame element addition to the MESS finite element program." Thesis, Virginia Polytechnic Institute and State University, 1985. http://hdl.handle.net/10919/80052.

Pełny tekst źródła
Streszczenie:
A plane frame element based on linear, elastic theory is developed and implemented into the MESS finite element program. Post-processed results include nodal displacements, end reactions, maximum tensile and average shear stress, and a deformed geometry plot. The element is tested for accuracy relative to simple beam theory and by comparison with results generated using another finite element program. In both cases agreement to within 6 significant figures was achieved. Because the intended use is educational, a survey of its benefit as a design aid in undergraduate instruction is included.
Style APA, Harvard, Vancouver, ISO itp.
7

Ingvarsson, Stina, and Malin Avaheden. "Positionssystemet - Möjligheter och begränsningar." Thesis, Högskolan i Jönköping, Högskolan för lärande och kommunikation, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-26369.

Pełny tekst źródła
Streszczenie:
Vi använder oss av ett positionssystem när vi skriver tal vilket ofta är en oreflekterad kunskap, denna kunskap förväntas elever tillägna sig redan i årskurs 1-3. Vi har under vår verksamhetsförlagda utbildning sett att vissa elever har svårt att förstå detta system. Därför är syftet med denna litteraturöversikt att undersöka vad befintlig forskning säger om elevers möjligheter och begränsningar i lärandet av positionssystemet. Materialet samlades in genom systematisk litteratursökning i flera databaser. Litteraturen som sedan analyserades och kategoriserades bestod av tretton stycken forsknin
Style APA, Harvard, Vancouver, ISO itp.
8

Aminuddin, Ahmad. "Structuring public place through the design of access systems : the design of urban public place, an addition to the "New Market" of Calcutta, India." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/10787.

Pełny tekst źródła
Streszczenie:
Thesis (M. Arch.)--Massachusetts Institute of Technology, Dept. of Architecture, 1995.<br>Includes bibliographical references (leaf 88).<br>The addition and re-design of a 19th century covered market in the heart of Calcutta, India, is the design project to explore the larger topic of place-making within a specific culture. In Calcutta the divisions of society within the city are becoming increasingly polarized along the lines of religion and wealth, creating a real need for a public place accessible to income and class groups from all over the city. The 'ground level' public spaces of colonia
Style APA, Harvard, Vancouver, ISO itp.
9

Kyriakidou-Christofidou, Athina. "Teaching addition and subtraction operations with schematic place-value learning aids & the impact on arithmetic competency." Thesis, Saint Louis University, 2016. http://pqdtopen.proquest.com/#viewpdf?dispub=10109214.

Pełny tekst źródła
Streszczenie:
<p> The present mixed-methods quasi-experimental study (embedding a case study and a mixed factorial within-between ANOVA test), conducted in a private English school in Limassol, Cyprus, investigated how the use of the schematic learning aids (researcher-made color-coded flash-cards and grids) influence year-2 children's ability to read, write and represent Hindu-Arabic numerals and how these number representations affect their arithmetic competency. This was achieved by comparing an intervention group (n=16) and a control group (n=17) before and after the 2-week intervention. </p><p> It is
Style APA, Harvard, Vancouver, ISO itp.
10

Castiglone, Linda Ann. "Experimental investigation into the reduction of supersonic skin-friction drag on a flat plate using transpiration and a cavity with mass addition." Thesis, This resource online, 1994. http://scholar.lib.vt.edu/theses/available/etd-08222009-040511/.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Additional plate"

1

United States. Congress. Senate. Committee on Foreign Relations. Nomination of Nicholas Platt: Report together with additional views. U.S. G.P.O., 1987.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Burk, Donna. Box it or bag it mathematics: Place value addition & subtraction. Math Learning Center, 1988.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

author, Kashyap Raj, ed. A monograph of the sea snakes, with four plates: Checklist and additional information by Raj Kashyap. Nature Books India, 2013.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

United States. Government Accountability Office, ed. Depot maintenance: Sustainment strategy for Harrier aircraft could be enhanced with additional metrics. U.S. Govt. Accountability Office, 2010.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Jackie, Langetieg, ed. Looking out the window: The Writers' Place : first annual literary contest : anthology of winning entries and additional selections. Writers' Place, 1995.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

United States. Congress. Senate. Committee on Foreign Relations. Resolution prohibiting the sale of F-5E/F aircraft to Honduras: Report together with additional views (to accompany S.J. Res. 128). U.S. G.P.O., 1987.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Susruta. Suśruta saṁhitā: Text with English translation, a full and comprehensive introduction, additional text, different readings, notes, comparative views, index, glossary and plates. Chowkhamba Sanskrit Series Office, 1998.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Operations, United States Congress House Committee on Government. Testing fraud and other Northrop improprieties in the Harrier II jet and cruise missile programs underscore need for additional procurement safeguards: Third report. U.S. G.P.O., 1991.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

United States. Congress. House. Committee on the Judiciary. Additional place of holding court in the District of Colorado: Report (to accompany H.R. 112) (including cost estimate of the Congressional Budget Office). U.S. G.P.O., 2004.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Maclise, Joseph, and Richard Upton Piper. Plates of Maclise's Surgical Anatomy with the Descriptions from the English Ed. , with an Additional Plate from Bougery. Creative Media Partners, LLC, 2018.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Additional plate"

1

Sawkins, Frederick J. "Additional Aspects of Arc-Related Metallogeny." In Metal Deposits in Relation to Plate Tectonics. Springer Berlin Heidelberg, 1990. http://dx.doi.org/10.1007/978-3-662-08681-0_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Ligaró, Salvatore Sergio. "The Problem of Additional Load of Minimum Work in a Thin Plate." In Concurrent Engineering: Tools and Technologies for Mechanical System Design. Springer Berlin Heidelberg, 1993. http://dx.doi.org/10.1007/978-3-642-78119-3_31.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Moriyama, H., T. Takai, T. Yamaguchi, and S. Kozai. "Effect of Number of Additional Bolts Outside Splice Plates on Behaviour of Frictional Type Bolted Joints with a Filler Plate." In Lecture Notes in Civil Engineering. Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-8079-6_134.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Harada, Takashi, and Hayato Yase. "Mobility Analysis of a Novel Six-DOF Parallel Robot with Additional Rotation and Plate Tilting Mechanisms." In Advances in Mechanism and Machine Science. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-45705-0_80.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Fan, Runlin, Junsheng Zheng, and Zize Zhan. "Penetration Behavior Analysis of Resin During the Impregnation Progress of Expanded Graphite Plates." In Proceedings of the 10th Hydrogen Technology Convention, Volume 1. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-99-8631-6_29.

Pełny tekst źródła
Streszczenie:
AbstractResin impregnation is an important process in the manufacture of composite graphite bipolar plates to reduce their porosity and improve their air tightness as well as flexural strength. In order to improve the filling efficiency of resin into expanded graphite plates and to investigate the factors influencing the resin penetration process, we compare the penetration rate and the upper limit of absorption of epoxy resin, acrylic resin and water in graphite plates. It was found that capillary force is part of the driving forces for resin penetration into the graphite plates, while the bo
Style APA, Harvard, Vancouver, ISO itp.
6

Schmidt, Edgar, Pascal Ruppert, and Dominik Henrich. "DOE Laser-assisted Turntable Calibration and Workpiece Registration." In Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2022. Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-10071-0_21.

Pełny tekst źródła
Streszczenie:
AbstractThe ability to review robot programs before they are executed can be used to correct erroneous programming. In complex processes, such a review can only be achieved by integration of additional peripheral devices and workpieces used into the programming framework. In this work, we present a semi-automatic method for the calibration of a turntable and a workpiece registration based on the turntable calibration utilizing only a DOE laser. The turntable pose is calculated by approaching markers on the turntable on a so called acquisition plane. Based on the calibration, workpieces are reg
Style APA, Harvard, Vancouver, ISO itp.
7

Orzech, Grace, and Morris Orzech. "Addition on A Nonsingular Cubic." In Plane Algebraic Curves. CRC Press, 2024. https://doi.org/10.1201/9781003573517-19.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Kleinfeller, Nikolai, Christopher M. Gehb, Maximilian Schaeffner, Christian Adams, and Tobias Melz. "Assessment of Model Uncertainty in the Prediction of the Vibroacoustic Behavior of a Rectangular Plate by Means of Bayesian Inference." In Lecture Notes in Mechanical Engineering. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-77256-7_21.

Pełny tekst źródła
Streszczenie:
AbstractDesigning the vibroacoustic properties of thin-walled structures is of particularly high practical relevance in the design of vehicle structures. The vibroacoustic properties of thin-walled structures, e.g., vehicle bodies, are usually designed using finite element models. Additional development effort, e.g., experimental tests, arises if the quality of the model predictions are limited due to inherent model uncertainty. Model uncertainty of finite element models usually occurs in the modeling process due to simplifications of the geometry or boundary conditions. The latter highly affe
Style APA, Harvard, Vancouver, ISO itp.
9

Matrosov, M. Yu, S. V. Golovin, D. A. Ringinen, et al. "Development of Technological Methods of Additional Grain Refinement for Production of Cold Resistant Nb-Bearing Plate Steel with SMYS 450-485 MPA and Thickness Up to 40 MM." In HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015. John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119223399.ch139.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Matrosov, M. Yu, S. V. Golovin, D. A. Ringinen, et al. "Development of Technological Methods of Additional Grain Refinement for Production of Cold Resistant Nb-Bearing Plate Steel with SMYS 450–485 MPa and Thickness up to 40 Mm." In HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48767-0_139.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Additional plate"

1

Dean, Frank W. H., Chris M. Fowler, Robert T. Farnell, and Samuel J. Mishael. "Hydrogen Flux and Corrosion Rate Measurements on Hydrogen Induced Cracking Susceptible and Resistant a516 Steels in Various Sour Environments." In CORROSION 2010. NACE International, 2010. https://doi.org/10.5006/c2010-10179.

Pełny tekst źródła
Streszczenie:
Abstract Two A516 16 mm plate steels were simultaneously exposed to various sour saturated solutions at 20°C over two week trials. One plate was known to be highly resistant to HIC cracking, the other to be highly susceptible to HIC cracking. Flux and corrosion rates of the two plates decreased after a few days in non-buffered acid solutions, whereas in buffered acid conditions they maintained a steady state. Crack surface ratios of HIC susceptible plates post-trial were approximately proportional to the total wall flux passed. In ammonium bisulfide solutions, flux was only induced by addition
Style APA, Harvard, Vancouver, ISO itp.
2

Curkovic, Ivan, Davor Skejic, Janko Košćak, and Ivan Lukačević. "Experimental Study on the Performance of Steel and Composite Plate Shear Walls Under Cyclic Behaviour." In IABSE Congress, San José 2024: Beyond Structural Engineering in a Changing World. International Association for Bridge and Structural Engineering (IABSE), 2024. https://doi.org/10.2749/sanjose.2024.0667.

Pełny tekst źródła
Streszczenie:
&lt;p&gt;Shear walls are mainly used as lateral load-resisting systems in tall structures or in any other case of high seismic activity. When referring to predominantly steel structures either steel plate shear wall (SPSW) or composite steel-concrete shear wall (CPSW) systems can be considered. Both utilise thin steel plates within the frame structure. In SPSW, the load is primarily transferred through tension diagonal, whereas in CPSW, where plate is stiffened with one or more reinforced concrete slabs, the load transfer also occurs through the formation of additional compression diagonals. T
Style APA, Harvard, Vancouver, ISO itp.
3

Cayard, M. S., R. D. Kane, and R. J. Horvath. "Sohic Resistance of C-Mn Plate Steels Used in Refinery Service." In CORROSION 2002. NACE International, 2002. https://doi.org/10.5006/c2002-02554.

Pełny tekst źródła
Streszczenie:
Abstract This research effort was designed to evaluate stress-oriented hydrogen-induced cracking (SOHIC) behavior of a broad range of advanced plate steels (&amp;lt;0.002 wt% sulfur) with various microstructures, compositions, types of metallurgical processing, welding and postweld heat treatment (PWHT). This behavior was examined in terms of apparent threshold stresses as a function of the above mentioned variables. These data were compared and contrasted to the performance of conventional plate steels (&amp;gt;0.002 wt% sulfur) that were not produced to enhance resistance to cracking in wet
Style APA, Harvard, Vancouver, ISO itp.
4

You, Zhongqing, and David Bauer. "A New Method for Fast Tank Floor Inspection." In CORROSION 1995. NACE International, 1995. https://doi.org/10.5006/c1995-95024.

Pełny tekst źródła
Streszczenie:
Abstract The first flux leakage type rotary scanning unit for testing 1/4" (6.35 mm) and 3/8" (9.53 mm) flat carbon steel plate and detecting corrosion in tank floor plates was developed in 1989. This paper presents a newly developed rotary scanning technique which combines eddy current and flux leakage inspection methods into one test probe design in a manner that allows each method to inspect the same location simultaneously. The eddy current component of the probe senses primarily the top surface conditions, while the flux leakage portion detects conditions on the top and bottom surfaces. B
Style APA, Harvard, Vancouver, ISO itp.
5

Jung, Hyunseung, Sadhvikas J. Adamame, Ting Shan Luk, et al. "InAs nonlinear metalens for focused terahertz pulse generation." In CLEO: Science and Innovations. Optica Publishing Group, 2024. http://dx.doi.org/10.1364/cleo_si.2024.sm1p.3.

Pełny tekst źródła
Streszczenie:
We demonstrate an InAs-based terahertz (THz) metasurface emitter that can generate and focus THz pulses using a binary-phase Fresnel zone plate concept. The metalens emitter successfully generates a focused THz beam without additional THz optics.
Style APA, Harvard, Vancouver, ISO itp.
6

Ray, Richard I., Brenda J. Little, and Joanne Jones-Meehan. "An Evaluation of Microbiologically Influenced Corrosion in Potential Fluids for Between-Hull Spaces." In CORROSION 2002. NACE International, 2002. https://doi.org/10.5006/c2002-02453.

Pełny tekst źródła
Streszczenie:
Abstract Glycol/water mixtures supported the growth of a diverse microbial population. However, in laboratory exposure tests there were no indications of localized or general corrosion of welded or flat plate 316L stainless steel in microbiologically contaminated 35%/65% glycol/water mixtures. When glycol/water mixtures were mixed with natural chloride-containing waters (10:1) there was insufficient conductivity to sustain an intentional crevice. Additional testing is underway to determine the level of degradation and chloride contamination required to sustain localized corrosion.
Style APA, Harvard, Vancouver, ISO itp.
7

Li, Peng, and Feng Jin. "The anti-plane vibration of quartz plate with an additional partial non-uniform mass layer." In 2012 Symposium on Piezoelectricity, Acoustic Waves, and Device Applications (SPAWDA 2012). IEEE, 2012. http://dx.doi.org/10.1109/spawda.2012.6464106.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Rahman, Rizqi Abdul, Muhamad Dwi Septiyanto, Ari Prasetyo, Budi Kristiawan, Sholikin Adrianto, and Syamsul Hadi. "The effect of the additional baffle plate on vortex turbine performance." In PROCEEDINGS OF THE 10TH INTERNATIONAL CONFERENCE ON SUSTAINABLE ENERGY ENGINEERING AND APPLICATION 2022 (ICSEEA2022). AIP Publishing, 2024. http://dx.doi.org/10.1063/5.0205754.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Vaitukaitis, Povilas, Kenneth Nai, Jiayu Rao, and Jiasheng Hong. "3D Metal Printed Deformed Elliptical Cavity Bandpass Filter with an Additional Plate." In 2021 IEEE CPMT Symposium Japan (ICSJ). IEEE, 2021. http://dx.doi.org/10.1109/icsj52620.2021.9648552.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Stanković, A., I. Zlatković, R. Nikolov, A. Đokić, and D. Pantić. "MgO as an Additional Layer at the Input Side of the Microchannel Plate." In 2023 IEEE 33rd International Conference on Microelectronics (MIEL). IEEE, 2023. http://dx.doi.org/10.1109/miel58498.2023.10315857.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Additional plate"

1

Sham, T. L., X. Zhang, and G. A. Young. Microstructural Characterization of Alloy 709 Plate Materials with Additional Heat Treatment Protocol. Office of Scientific and Technical Information (OSTI), 2019. http://dx.doi.org/10.2172/1601459.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Hill, Richard, and Aquiles Perez Molinari. PR-334-174504-R01 Suitability of Line Pipe Materials for Sour Service Literature Research Summary. Pipeline Research Council International, Inc. (PRCI), 2018. http://dx.doi.org/10.55274/r0011496.

Pełny tekst źródła
Streszczenie:
Literature search focused on contributing factors for the appearance of near surface hard zones in line pipe steels manufactured using TMCP plate has been developed. Additional literature search was conducted on the influence of near surface hard zones on sulfide stress cracking of line pipe steels manufactured using TMCP plate. It can be inferred from the collective research evaluated that the chemical composition, rolling temperatures, scale formation during hot rolling and the accelerated cooling process contribute to the likelihood of forming near surface hard zones in TMCP plates used for
Style APA, Harvard, Vancouver, ISO itp.
3

Denys and Lefevre. L51739 Effect of Defect Size and YS-TS Ratio on X70 and X80 Pipe Plastic Deformation Capacity. Pipeline Research Council International, Inc. (PRCI), 1996. http://dx.doi.org/10.55274/r0010618.

Pełny tekst źródła
Streszczenie:
The objective of this research project, which is a logical extension of the work performed under Contract PR 202-010, was to generate additional experimental data to quantify the effect of plate thickness on the relationship between Y/T ratio and tolerable defect dimensions. To that end, an experimental program was undertaken on thin walled X70 and X80 linepipe steels in plate form.
Style APA, Harvard, Vancouver, ISO itp.
4

Shukla, Pavan, Andrew Nordquist, Roderick Fuentes, and Bruce Wiersma. PR644-183611-R01 Vapor Corrosion Inhibitors Effectiveness for Tank Bottom Plate Corrosion Control - Phase 2. Pipeline Research Council International, Inc. (PRCI), 2022. http://dx.doi.org/10.55274/r0012231.

Pełny tekst źródła
Streszczenie:
Soil-side corrosion control is a major challenge for Aboveground Storage Tank (AST) operators. Vapor Corrosion Inhibitors (VCIs) are increasingly being used as an additional corrosion control mitigation tool. A PRCI-sponsored Phase 1 study established baseline performance and evaluated monitoring methods for the VCIs. One focus of this study included VCIs' performance comparison with effective cathodic protection (CP) systems. The investigation concluded that VCIs' corrosion mitigation performance is equivalent to that of an effective CP system. This study also evaluated tank bottom corrosion
Style APA, Harvard, Vancouver, ISO itp.
5

Keen, C. E., K. Dickie, L. T. Dafoe, et al. Rifting and evolution of the Labrador-Baffin Seaway. Natural Resources Canada/CMSS/Information Management, 2022. http://dx.doi.org/10.4095/321854.

Pełny tekst źródła
Streszczenie:
The evolution of the 2000 km long Mesozoic rift system underlying the Labrador-Baffin Seaway is described, with emphasis on results from geophysical data sets, which provide the timing, sediment thickness, and crustal structure of the system. The data sets include seismic reflection and refraction, gravity, and magnetic data, with additional constraints provided by near-surface geology and well data. Many features that characterize rift systems globally are displayed, including: wide and narrow rift zones; magma-rich and magma-poor margin segments; exhumation of continental mantle in distal, m
Style APA, Harvard, Vancouver, ISO itp.
6

George, Darin, and Christopher Grant. PR-015-15601-R01 Pulsation Effects on Ultrasonic Meters Phase II. Pipeline Research Council International, Inc. (PRCI), 2016. http://dx.doi.org/10.55274/r0010905.

Pełny tekst źródła
Streszczenie:
Transmission and storage operations frequently move natural gas using reciprocating compressors that may generate flow pulsations. Most measurement systems cannot accurately measure the flow rate of a pulsating gas stream, and the resulting errors can cause inaccurate gas volumes and accounting imbalances. A previous PRCI research project tested whether recent advances in ultrasonic meters may allow them to function without measurement error in pulsating flows. This project expanded on the previous work and tested similar ultrasonic meters to look for relationships between ultrasonic meter tra
Style APA, Harvard, Vancouver, ISO itp.
7

Wang. L52344 Background of Linepipe Specifications. Pipeline Research Council International, Inc. (PRCI), 2011. http://dx.doi.org/10.55274/r0010446.

Pełny tekst źródła
Streszczenie:
Some of the future pipelines are expected to be constructed in remote areas. The environment in these areas can impose higher longitudinal plastic deformation on the pipelines. Such environmental conditions include, but not limited to, frost heave and thaw settlement in the northern arctic region, seismic activity, slope instability, mine subsidence, upheaval buckling, etc. The overall industry experience for this type of loading is very limited. The other trend in new pipeline construction is the move towards higher internal pressure (design factor of 0.80 as opposed to the more traditional 0
Style APA, Harvard, Vancouver, ISO itp.
8

guo, wenxuan, WH Chen, F. Wu, et al. Can locked fibula nail replace plate fixation for treatment of acute ankle fracture? A protocol for systematic review and meta-analysis of randomized controlled trials. INPLASY - International Platform of Registered Systematic Review and Meta-analysis Protocols, 2022. http://dx.doi.org/10.37766/inplasy2022.7.0094.

Pełny tekst źródła
Streszczenie:
Review question / Objective: We seek to conduct a meta-analysis of relevant studies to evaluate and compare functional outcomes and complication rates between locked fibula intramedullary nail fixation and plate fixation for treatment of ankle fractures. Condition being studied: Ankle fractures, with an incidence rate of 4.22/10, 000 person-years in the United States, are one of the most common lower extremity fractures. Currently, the standard surgical treatment approaches for unstable ankle fractures involves open reduction and internal fixation (ORIF) with plates and screws. However, ORIF h
Style APA, Harvard, Vancouver, ISO itp.
9

Harman. PR-364-09606-R01 Investigation into the Jetting Behavior of Perforated Plate Flow Conditioners. Pipeline Research Council International, Inc. (PRCI), 2012. http://dx.doi.org/10.55274/r0010742.

Pełny tekst źródła
Streszczenie:
A study was conducted to determine the presence of jetting downstream of a perforated plate flow conditioner in an 8 inch pipe flowing high pressure natural gas. Data presented indicates no measurable jetting is present 10 pipe diameters (10D) downstream of the perforated plate tested from 110 FPS to 10 FPS. Slight velocity profile anomalies were detected 3D downstream of the perforated plate, and severe jetting was detected at 0.9D. Additionally, a double-blind CFD (Computational Fluid Dynamics) model was created for the three different test configurations. The CFD modeling results showed goo
Style APA, Harvard, Vancouver, ISO itp.
10

Matte, S., M. Constantin, and R. Stevenson. Mineralogical and geochemical characterisation of the Kipawa syenite complex, Quebec: implications for rare-earth element deposits. Natural Resources Canada/CMSS/Information Management, 2022. http://dx.doi.org/10.4095/329212.

Pełny tekst źródła
Streszczenie:
The Kipawa rare-earth element (REE) deposit is located in the Parautochton zone of the Grenville Province 55 km south of the boundary with the Superior Province. The deposit is part of the Kipawa syenite complex of peralkaline syenites, gneisses, and amphibolites that are intercalated with calc-silicate rocks and marbles overlain by a peralkaline gneissic granite. The REE deposit is principally composed of eudialyte, mosandrite and britholite, and less abundant minerals such as xenotime, monazite or euxenite. The Kipawa Complex outcrops as a series of thin, folded sheet imbricates located betw
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Additional plate” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii