Zaloguj się

Gotowe bibliografie tematyczne / Alcohol Free Printing / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Alcohol Free Printing.

Artykuły w czasopismach na temat „Alcohol Free Printing”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 38 najlepszych artykułów w czasopismach naukowych na temat „Alcohol Free Printing”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Bitto, Peter, and Darrell Reeve. "Alcohol-free lithographic printing." Journal of Cleaner Production 5, no. 3 (1997): 203–5. http://dx.doi.org/10.1016/s0959-6526(97)00021-8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Mr., Ramesh Kumar*1 Mr. Bijender2 &. Mr. Sandeep Boora3. "A SURVEY OF ECO-FRIENDLY TECHNIQUES COMING FORTH IN SHEET-FED OFFSET PRESSES." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 6 (2017): 388–92. https://doi.org/10.5281/zenodo.814508.

Pełny tekst źródła

Streszczenie:

Objective of this research paper is to put emphasis on various eco-friendly techniques existing today in sheet fed offset printing organizations and their futuristic aspects. Reducing pollution, decreasing carbon footprints and lowering volatile organic compounds have become essential today for various offset printing organizations for sustainable developments. To get aware of eco-friendly techniques coming forth, a survey of 15 printing organizations was conducted in Delhi NCR and BADDI (Himachal Pradesh) region. The data was collected with the help of questionnaire consisting of 8 questions.

Style APA, Harvard, Vancouver, ISO itp.

3

Zhang, Wenhui, Ran Liu, Xueyan Lv, et al. "Oxidant-Free Electrochemical Direct Oxidative Benzyl Alcohols to Benzyl Aldehydes Using Three-Dimensional Printing PPAR Polyoxometalate." Molecules 28, no. 18 (2023): 6460. http://dx.doi.org/10.3390/molecules28186460.

Pełny tekst źródła

Streszczenie:

The oxidation of benzyl alcohols is an important reaction in organic synthesis. Traditional methods for benzyl alcohol oxidation have not been widely utilized due to the use of significant amounts of precious metals and environmentally unfriendly reagents. In recent years, electrocatalytic oxidation has gained significant attention, particularly electrochemical anodic oxidation, which offers a sustainable alternative for oxidation without the need for external oxidants or reducing agents. Here, a copper monosubstituted phosphotungstate-based polyacrylate resins (Cu-LPOMs@PPAR) catalyst has bee

Style APA, Harvard, Vancouver, ISO itp.

4

Li, Ling, Runshan Chu, Qianxue Yang, Minhua Li, Tieling Xing, and Guoqiang Chen. "Performance of Washing-Free Printing of Disperse Dye Inks: Influence of Water-Borne Polymers." Polymers 14, no. 20 (2022): 4277. http://dx.doi.org/10.3390/polym14204277.

Pełny tekst źródła

Streszczenie:

Dye-containing wastewater discharge from the textile industry poses a serious pollution hazard that can be overcome by eliminating the washing step following the dyeing process. To study the washing-free printing of disperse dye ink, a number of water-borne polymers were selected and added to the ink, and the properties of the inks were discussed. By optimizing the ink formulation, printed fabrics with high color strength and color fastness were produced. The effects of the addition of polyvinylpyrrolidone (PVP), polyvinyl alcohol (PVA), and polyethylene glycol (PEG) on the ink jetting perform

Style APA, Harvard, Vancouver, ISO itp.

5

Imani, Monireh, Ali Ghasemian, Mohammad Reza Dehghani-Firouzabadi, Elyas Afra, Patrick A. C. Gane, and Orlando J. Rojas. "Nano-lignocellulose from recycled fibres in coatings from aqueous and ethanolic media: effect of residual lignin on wetting and offset printing quality." Nordic Pulp & Paper Research Journal 34, no. 2 (2019): 200–210. http://dx.doi.org/10.1515/npprj-2018-0053.

Pełny tekst źródła

Streszczenie:

Abstract Nano-lignocellulose (NLC) and lignin-free nanocellulose (nano-holocellulose, NHC) were used in paper coating to investigate their effect on coating layer quality and offset printing. The NLC was produced by microfluidisation of unbleached secondary fibres while the reference NHC was obtained from the same fibre source after lignin removal (OHEPH bleaching), following the same mechanical process. TEMPO-mediated oxidation of the fibres prior to microfluidisation was applied to increase the electrostatic charge and hydrophilicity of the nanofibrils. The coatings, displaying given surface

Style APA, Harvard, Vancouver, ISO itp.

6

Ghosh, Kalyan, and Martin Pumera. "Free-standing electrochemically coated MoSx based 3D-printed nanocarbon electrode for solid-state supercapacitor application." Nanoscale 13, no. 11 (2021): 5744–56. https://doi.org/10.1039/d0nr06479c.

Pełny tekst źródła

Streszczenie:

The 3D-printing technology offers an innovative approach to develop energy storage devices because of its ability to create facile and low cost customized electrodes for modern electronics. Among the recently explored 2D nanomaterials beyond graphene, molybdenum sulfide (MoS<em><sub>x</sub></em>) has been found as a promising material for electrochemical energy storage devices. In this study, a nanocarbon-based conductive filament was 3D-printed and then activated by solvent treatment, followed by electrodeposition of MoS<em><sub>x</sub></em> on the printed nanocarbon electrode’s surface

Style APA, Harvard, Vancouver, ISO itp.

7

Zhang, Hongmei, Fan Hu, Yuanfeng Duan, Jian Liao, and Jiaqi Yang. "Mechanical Properties and Microstructure of Highly Flowable Geopolymer Composites with Low-Content Polyvinyl Alcohol Fiber." Buildings 14, no. 2 (2024): 449. http://dx.doi.org/10.3390/buildings14020449.

Pełny tekst źródła

Streszczenie:

Geopolymer enhances mechanical properties with polyvinyl alcohol (PVA) fibers, but there has been limited research exploring low PVA fiber dosages for mechanical properties in 3D printing or shotcrete. This study experimentally investigated slag and fly ash-based geopolymer mixtures reinforced with 0.1%, 0.15%, and 0.2% PVA fiber by volume as well as a control group without PVA fibers. These mixtures were prepared using fly ash, quartz sand, slag powder, silica fume, and an aqueous sodium silicate solution as the alkali activator, with the addition of PVA fiber to enhance composite toughness.

Style APA, Harvard, Vancouver, ISO itp.

8

Ding, Shirun, and Bing Feng Ng. "Particle emission levels in the user operating environment of powder, ink and filament-based 3D printers." Rapid Prototyping Journal 27, no. 6 (2021): 1124–32. http://dx.doi.org/10.1108/rpj-02-2020-0039.

Pełny tekst źródła

Streszczenie:

Purpose This study aims to examine on-site particle concentration levels due to emissions from a wide spectrum of additive manufacturing techniques, including polymer-based material extrusion, metal and polymer-based powder bed fusion, directed energy deposition and ink-based material jetting. Design/methodology/approach Particle concentrations in the operating environments of users were measured using a combination of particle sizers including the TSI 3910 Nano SMPS (10–420 nm) and the TSI 3330 optical particle sizer (0.3–10 µm). Also, fumes from a MEX printer during printing were directly ca

Style APA, Harvard, Vancouver, ISO itp.

9

Zhao, Wenjie, Chen Liu, Yanbing Wang, et al. "A flexible substrate-free electrochemical tattoo sensor with alcohol transfer printing method for real-time monitoring of sodium ions in sweat." Sensors and Actuators B: Chemical 428 (April 2025): 137245. https://doi.org/10.1016/j.snb.2025.137245.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Goh, Wei, and Michinao Hashimoto. "Dual Sacrificial Molding: Fabricating 3D Microchannels with Overhang and Helical Features." Micromachines 9, no. 10 (2018): 523. http://dx.doi.org/10.3390/mi9100523.

Pełny tekst źródła

Streszczenie:

Fused deposition modeling (FDM) has become an indispensable tool for 3D printing of molds used for sacrificial molding to fabricate microfluidic devices. The freedom of design of a mold is, however, restricted to the capabilities of the 3D printer and associated materials. Although FDM has been used to create a sacrificial mold made with polyvinyl alcohol (PVA) to produce 3D microchannels, microchannels with free-hanging geometries are still difficult to achieve. Herein, dual sacrificial molding was devised to fabricate microchannels with overhang or helical features in PDMS using two compleme

Style APA, Harvard, Vancouver, ISO itp.

11

Mengual, Ximo, France Gimnich, Hannah Petersen, and Jonas J. Astrin. "Natural History Wet Collections: Observations on PH Readings from the Use of Different Ethanol and Label Types." Collection Forum 33, no. 1 (2019): 7–17. http://dx.doi.org/10.14351/0831-4985-33.1.7.

Pełny tekst źródła

Streszczenie:

Abstract We examined the effects of different types of specimen labels and tags on pH of different concentrations of ethanol typically used for fluid preservation in natural history collections. Labels were immersed in three different concentrations of ethanol, 96% pure undenatured ethanol (EtOH), 96% EtOH denatured with methyl-ethyl ketone (MEK), and 99.8% pure undenatured EtOH, with or without the presence of insect specimens, and the solutions were evaluated after 26 months for changes over time in pH reading. In general, pH readings of all label trials with 96% and 99.8% ethanol increased

Style APA, Harvard, Vancouver, ISO itp.

12

Shojaie, Fatemeh, Carmen Ferrero, and Isidoro Caraballo. "Development of 3D-Printed Bicompartmental Devices by Dual-Nozzle Fused Deposition Modeling (FDM) for Colon-Specific Drug Delivery." Pharmaceutics 15, no. 9 (2023): 2362. http://dx.doi.org/10.3390/pharmaceutics15092362.

Pełny tekst źródła

Streszczenie:

Dual-nozzle fused deposition modeling (FDM) is a 3D printing technique that allows for the simultaneous printing of two polymeric filaments and the design of complex geometries. Hence, hybrid formulations and structurally different sections can be combined into the same dosage form to achieve customized drug release kinetics. The objective of this study was to develop a novel bicompartmental device by dual-nozzle FDM for colon-specific drug delivery. Hydroxypropylmethylcellulose acetate succinate (HPMCAS) and polyvinyl alcohol (PVA) were selected as matrix-forming polymers of the outer pH-depe

Style APA, Harvard, Vancouver, ISO itp.

13

Cadilha Marques, Gabriel, Mahsa K.Saghafi, Ben Breitung, and Jasmin Aghassi-Hagmann. "(Invited) High Performance Electrolyte-Gated Transistors Based on Metal Oxides with Low Annealing Temperature Requirements." ECS Meeting Abstracts MA2025-01, no. 33 (2025): 1647. https://doi.org/10.1149/ma2025-01331647mtgabs.

Pełny tekst źródła

Streszczenie:

Metal oxides are emerging as promising materials for printed electronics (PE), enabling the fabrication of thin-film devices such as diodes, thin-film transistors (TFTs), and memristors, amongst other. These materials are favored due to the exhibition of high field-effect mobility values (~100 cm2/(Vs)), high carrier density, transparency, stability in air, non-toxicity, and can be prepared by mostly using water or alcohol-based solvents. We employ a large portfolio of various printing techniques, including inkjet, electrohydrodynamic, and even direct laser printing to deposit metal oxide thin

Style APA, Harvard, Vancouver, ISO itp.

14

Kumar, J., S. Heamavathi, and M. D. Saravana Devi. "Physicochemical Evaluation and Standardization of Siddha Formulation Ratthi Naagara Rasa Mezhugu by Modern Techniques." International Journal of Health Sciences and Research 12, no. 5 (2022): 238–50. http://dx.doi.org/10.52403/ijhsr.20220525.

Pełny tekst źródła

Streszczenie:

Siddha medicine has own idiosyncratic way to treat various diseases. The Siddha system has different formulation in herbal, mineral, poly-herbal, herbo-mineral. Ratthi Naagara Rasa Mezhugu is a herbo-mineral formulation mentioned in the Siddha literature which indicated for Rheumatoid arthritis, penile cancer, vaginal cancer. The present study indicates the quality of the drug Ratthinaagara rasa mezhugu identified by physicochemical analysis, phytochemical analysis and organoleptic characters and other analytical techniques was based on the PLIM guidelines. High-performance thin-layer chromato

Style APA, Harvard, Vancouver, ISO itp.

15

Ding, Cailing, Jianyong Yu, and Weiguo Chen. "The structure and properties of wool treated with a reversed-phase microemulsion containing aqueous alkali." Textile Research Journal 88, no. 3 (2016): 254–60. http://dx.doi.org/10.1177/0040517516677229.

Pełny tekst źródła

Streszczenie:

In order to limit modification to the surface of wool fibers and decrease pollution caused by conventional chemical treatments using chlorine, a water-in-oil-type reversed-phase microemulsion with decamethylcyclopentasiloxane as the external phase was prepared containing very small amounts of an aqueous solution of alkali. The edges of the wool cuticle scales were modified by the alkali in aqueous solution contained in the reversed-phase microemulsion. The external phase decamethylcyclopentasiloxane can be recycled after application. In this paper, the solubility of water in the reversed-phase

Style APA, Harvard, Vancouver, ISO itp.

16

Yariesbouei, Mahdieh, Remco G. P. Sanders, Remco J. Wiegerink, and Joost C. Lötters. "Modeling, Fabrication, and Testing of a 3D-Printed Coriolis Mass Flow Sensor." Sensors 23, no. 8 (2023): 4062. http://dx.doi.org/10.3390/s23084062.

Pełny tekst źródła

Streszczenie:

This paper presents the modeling, fabrication, and testing of a 3D-printed Coriolis mass flow sensor. The sensor contains a free-standing tube with a circular cross-section printed using the LCD 3D-printing technique. The tube has a total length of 42 mm, an inner diameter of about 900 µm, and a wall thickness of approximately 230 µm. The outer surface of the tube is metalized using a Cu plating process, resulting in a low electrical resistance of 0.5 Ω. The tube is brought into vibration using an AC current in combination with a magnetic field from a permanent magnet. The displacement of the

Style APA, Harvard, Vancouver, ISO itp.

17

Janusas, Pilkauskas, Janusas, and Palevicius. "Active PZT Composite Microfluidic Channel for Bioparticle Manipulation." Sensors 19, no. 9 (2019): 2020. http://dx.doi.org/10.3390/s19092020.

Pełny tekst źródła

Streszczenie:

The concept of active microchannel for precise manipulation of particles in biomedicine is reported in this paper. A novel vibration-assisted thermal imprint method is proposed for effective formation of a microchannel network in the nanocomposite piezo polymer layer. In this method, bulk acoustic waves of different wavelengths excited in an imprinted microstructure enable it to function in trapping–patterning, valve, or free particle passing modes. Acoustic waves are excited using a special pattern of electrodes formed on its top surface and a single electric ground electrode formed on the bo

Style APA, Harvard, Vancouver, ISO itp.

18

Hu, Qingxi, Xiaoyang Hou, Hekai Shi, et al. "Design of a Janus Composite Patch with Anti-Adhesive and Growth-Promoting Functions for Abdominal Wall Defect Repair." Bioengineering 12, no. 5 (2025): 522. https://doi.org/10.3390/bioengineering12050522.

Pełny tekst źródła

Streszczenie:

Tension-free hernioplasty has effectively reduced postoperative recurrence and mitigated complications by employing polymer patches. However, clinically used polymer patches often fall short in terms of the anti-deformation, anti-adhesion, and tissue integration functions, which can result in visceral adhesions and foreign body reactions after implantation. In this study, a Janus three-layer composite patch was developed for abdominal wall defect repair using a combination of 3D printing, electrospraying, and electrospinning technologies. On the visceral side, a dense electrospun polyvinyl alc

Style APA, Harvard, Vancouver, ISO itp.

19

Zhang, Minmin, Beibei Yang, Xuanyu Luan, et al. "State of the Art in Constructing Gas-Propelled Dissolving Microneedles for Significantly Enhanced Drug-Loading and Delivery Efficiency." Pharmaceutics 15, no. 4 (2023): 1059. http://dx.doi.org/10.3390/pharmaceutics15041059.

Pełny tekst źródła

Streszczenie:

Dissolving microneedles (MNs) have emerged as a promising transdermal delivery system, as they integrate the advantages of both injection and transdermal preparations. However, the low drug-loading and limited transdermal delivery efficiency of MNs severely hinder their clinical applications. Microparticle-embedded gas-propelled MNs were developed to simultaneously improve drug-loading and transdermal delivery efficiency. The effects of mold production technologies, micromolding technologies, and formulation parameters on the quality of gas-propelled MNs were systematically studied. Three-dime

Style APA, Harvard, Vancouver, ISO itp.

20

Oktay, Büsra, Fatih Ciftci, Azime Erarslan, and Esma Ahlatcıoğlu Özerol. "Dual-Layer Natamycin and Boric-Acid-Reinforced PVA/Chitosan by 3D Printing and Electrospinning Method: Characterization and In Vitro Evaluation." Polymers 17, no. 12 (2025): 1673. https://doi.org/10.3390/polym17121673.

Pełny tekst źródła

Streszczenie:

This study presents the development and comprehensive characterization of biopolymer-based nanofibrous composites composed of polyvinyl alcohol (PVA), chitosan (CS), boric acid (BA), and a natural antifungal agent natamycin (NAT), designed for therapeutic applications. A dual-layer 3D-fiber composite (PVA/CS/BA_PVA/NAT) was successfully fabricated using a layer-by-layer 3D bioprinting technique and electro-spinning, integrating BA into the core matrix and NAT into the outer layer. Mechanical tests revealed a significantly improved elastic modulus of 763.04 ± 14.54 MPa and the highest ultimate

Style APA, Harvard, Vancouver, ISO itp.

21

Dadami, Sunanda, and Vadiraj Tangod. "Absorption and Fluorescence Mechanisms of Red Mega 480 Laser Dye Coupled with Silver Nanoparticles." Nucleus 60, no. 2 (2023): 131–35. https://doi.org/10.71330/nucleus.60.02.1301.

Pełny tekst źródła

Streszczenie:

Herein, we used the chemical reduction method to synthesize silver nanoparticles. The characterization of synthesized particles is done using UV-Vis, SEM, and TEM techniques, which reveal sizes in the range of 4–12 nm. In this particular instance, the optical absorption spectra of synthesized silver nanoparticles produced a maximal spike in the 400–410 nm region. This spike is attributed to surface plasmon resonance. The spectra of emission and absorption intensities of the exceptionally brilliant laser Red Mega 480 dye in alcohol solvents with the addition of silver nanoparticles indicate que

Style APA, Harvard, Vancouver, ISO itp.

22

Ali A, Vajahath, Govindaraj B, and Saravanadevi M D. "Standardization of Siddha Poly-Herbal Formulation Thirinethira Chooranam by Modern Pharmaceutical Analytical Techniques." International Journal of Health Sciences and Research 12, no. 5 (2022): 187–99. http://dx.doi.org/10.52403/ijhsr.20220521.

Pełny tekst źródła

Streszczenie:

Thirinethira Chooranam is a multi-herbal formulation indicated as hematinic and appetizer in Siddha literature. The aim of this study is to standardize Thirinethira Chooranam to ensure its quality, purity and safety through its physicochemical, microbiological, chromatographic, biochemical parameters and analysis of heavy metals, Pesticide residue and aflatoxins. This study determines the physico-chemical parameters that are loss on drying, total ash, acid insoluble ash, water soluble extractive, alcohol soluble extractive and pH as 2.187%, 6.9 %, 0.18%, 14.17%, 4.567% and 5.5 respectively den

Style APA, Harvard, Vancouver, ISO itp.

23

K. Vaishnavadevi and R. Antony Duraichi. "Physicochemical characterization, Phytochemical analysis and Anti-microbial activity of Elathy mathirai." World Journal of Advanced Research and Reviews 21, no. 2 (2024): 826–38. http://dx.doi.org/10.30574/wjarr.2024.21.2.0349.

Pełny tekst źródła

Streszczenie:

Elathy Mathirai is a Siddha herbomineral formulation indicated to cure sori(itching), sirangu(Scabies), suram(fever), vaayu, maandham(gastro intestinal disorder) . The aim of the study is to standardize Elathy Mathirai to ensure its quality, purity and safety through its physicochemical, chromatographic, phytochemical, heavy metal, pesticide residue and aflatoxins analysis and the secondary objective is to evaluate its antimicrobial property. This study determines the physicochemical paramaters that are loss on drying, total ash, acid insoluble ash, water soluble extractive, alcohol soluble ex

Style APA, Harvard, Vancouver, ISO itp.

24

Aghassi-Hagmann, Jasmin. "(Invited) Solution-Processable Materials and Structuring Processes for Electrochemically Gated Thin Film Devices." ECS Meeting Abstracts MA2024-01, no. 31 (2024): 1545. http://dx.doi.org/10.1149/ma2024-01311545mtgabs.

Pełny tekst źródła

Streszczenie:

Printed and flexible electronics enable interesting novel applications in the fields of sensors [1], bioelectronics [2], and security applications [3]. Most of them gain their functionality from a layered structure composed of different materials that interact with each other. For semiconducting layers, organic and inorganic materials can be used; in this regard, the respective functional materials need to be formulated into inks that are then printed on various substrates. The structuring process of printing is a complex process in which many chemical and physical process parameters need to b

Style APA, Harvard, Vancouver, ISO itp.

25

K., Vaishnavadevi, and Antony Duraichi R. "Physicochemical characterization, Phytochemical analysis and Anti-microbial activity of Elathy mathirai." World Journal of Advanced Research and Reviews 21, no. 2 (2024): 826–38. https://doi.org/10.5281/zenodo.14007057.

Pełny tekst źródła

Streszczenie:

<em>Elathy Mathirai</em> is a Siddha herbomineral formulation indicated to cure <em>sori(</em>itching)<em>, sirangu(</em>Scabies)<em>, suram</em>(fever)<em>,</em> <em>vaayu, maandham</em>(gastro intestinal disorder) . The aim of the study is to standardize <em>Elathy Mathirai</em> to ensure its quality, purity and safety through its physicochemical, chromatographic, phytochemical, heavy metal, pesticide residue and aflatoxins analysis and the secondary objective is to evaluate its antimicrobial property. This study determines the physicochemical paramaters that are los

Style APA, Harvard, Vancouver, ISO itp.

26

Erukainure, Frank Efe, and Azahar Ali. "Water Quality Monitoring: All-Solid-State 3D-Printed Sensors for Phosphate Detection in River Water." ECS Meeting Abstracts MA2024-01, no. 52 (2024): 3088. http://dx.doi.org/10.1149/ma2024-01523088mtgabs.

Pełny tekst źródła

Streszczenie:

INTRODUCTION High phosphate ( PO4 3- or P) levels in surface water cause eutrophication, which negatively impacts aquatic life and causes an economic loss of ~$2.2 billion per year. Currently, no low-cost sensors exist for long-term continuous monitoring of phosphate in water. Existing meters (HANNA colorimeter, and HORIBA) can detect P-levels but can neither perform continuous monitoring nor detect low concentrations. A paper-based colorimeter sensor for phosphate detection was demonstrated [1], however, this sensor takes a longer time to test. A Fabry−Perot phosphate sensor was introduced [2

Style APA, Harvard, Vancouver, ISO itp.

27

Omerovic, Nejra, Marko Radovic, Slavica Savic, and Jaroslav Katona. "Preparation of TiO2 and ZnO dispersions for inkjet printing of flexible sensing devices." Processing and Application of Ceramics 12, no. 4 (2018): 326–34. http://dx.doi.org/10.2298/pac1804326o.

Pełny tekst źródła

Streszczenie:

Research presented in this article focuses on the preparation of functional dispersions for inkjet printing of nanoparticles as sensitive layers. The stable suspensions of MOx(M = Ti, Zn) were prepared using gum arabic (GA) and Solsperse? 40000 (SO) as dispersants. A special attention was paid to the monitoring of particle size evolution during the planetary ball milling of dispersions, so that optimum ratio between milling time and particle size can be determined. After adjusting the printing parameters, prepared inks were printed on the flexible PET substrate with interdigitated electrodes (

Style APA, Harvard, Vancouver, ISO itp.

28

Omerović, Nejra, Marko Radović, Slavica M. Savić, and Jaroslav Katona. "Preparation of TiO2 and ZnO dispersions for inkjet printing of flexible sensing devices." Processing and Application of Ceramics 12, no. 4 (2018): 326–34. https://doi.org/10.2298/PAC1804326O.

Pełny tekst źródła

Streszczenie:

Research presented in this article focuses on the preparation of functional dispersions for inkjet printing of nanoparticles as sensitive layers. The stable suspensions of MOx (M = Ti, Zn) were prepared using gum arabic (GA) and Solsperse<sup>®</sup> 40000 (SO) as dispersants. A special attention was paid to the monitoring of particle size evolution during the planetary ball milling of dispersions, so that optimum ratio between milling time and particle size can be determined. After adjusting the printing parameters, prepared inks were printed on the flexible PET substrate with interdigita

Style APA, Harvard, Vancouver, ISO itp.

29

Nugraha, Mawan, and Murdani Murdani. "DEFECT PRODUCT COMPARISON OF THE USE OF ALCOHOL-BASED FOUNTAIN SOLUTION AND ALCOHOL-FREE IN OFFSET PRINTING." KREATOR 3, no. 1 (2021). http://dx.doi.org/10.46961/kreator.v3i1.303.

Pełny tekst źródła

Streszczenie:

One of the main components of the fountain solution used for the offset printing technique is isoprophil alcohol (IPA), which is related to its function as a surface tension reducing agent, cooling agent for printing plates and at the same time having anti-bioorganic function. However, complaints have also been made about the weaknesses in the use of IPA related to odor, toxicity and too high evaporation rate during its use. Therefore, in this article, IPA is compared to the "alcohol-free" type when used in the field as a wetting solution mixture using a KBK offset printing machine to produce

Style APA, Harvard, Vancouver, ISO itp.

30

Tuan Phung, Anh, Quang Hung Nguyen, Hong Quyen Duong, and Hong Ha Cao. "STUDY OF WETTING ON THE NON-IMAGE AREA OF OFFSET PRINTING PLATES BY AN ALTERNATIVE ISO-PROPYL ALCOHOL-FREE FOUNTAIN SOLUTION." ASEAN Engineering Journal 10, no. 2 (2021). http://dx.doi.org/10.11113/aej.v10.16596.

Pełny tekst źródła

Streszczenie:

In this study, an alternative aqueous isopropyl alcohol-free fountain solution for sheet-fed offset printing is prepared comprising 5 w/w% McIlvaine's buffer system for pH control, 0.3 w/w% Polysorbate 80 as a surfactant, 1 w/w% magnesium nitrate hexahydrate as a conductivity agent and 10 w/w% ethylene glycol mono-butyl ether as an additional wetting agent. The percentages of each composition are w/w% of active and then adjusted to 100 w/w% by adding distilled water. The contact angles of the obtained fountain solution on non-image areas of three common offset printing plates: CTP plate of Kod

Style APA, Harvard, Vancouver, ISO itp.

31

Strutwolf, Jörg, Yong Chen, Johann Ullrich, Martin Dehnert, and Arved C. Hübler. "Memristive devices based on mass printed organic resistive switching layers." Applied Physics A 127, no. 9 (2021). http://dx.doi.org/10.1007/s00339-021-04851-9.

Pełny tekst źródła

Streszczenie:

AbstractResistive random-access memory is a candidate for next-generation non-volatile memory architectures. In this study, we use flexographic roll-to-roll printing technology for deposition of the resistive layer, a printing method that allows fast and cost-effective fabrication to create non-volatile resistive memory devices. Metal-free organic polymers blends composed of poly(methyl methacrylate) (PMMA) and a surplus of poly(vinyl alcohol) (PVA) serve as the active layer. Microscopic studies of the roll-to-roll printed layers show circular domains of PMMA embedded in PVA. The influence of

Style APA, Harvard, Vancouver, ISO itp.

32

Kim, Han-Jung, Jeongmin Park, Junhee Kim, Yohan Ko, and Yoonkap Kim. "Flexible transparent electrode with embedded silver mesh by eco-friendly polymer solution-assisted metal transfer process." MRS Advances, August 3, 2023. http://dx.doi.org/10.1557/s43580-023-00621-2.

Pełny tekst źródła

Streszczenie:

AbstractFlexible transparent electrodes (FTEs) with an embedded metal meshes play an indispensable role in many high-performance optoelectronic devices due to their excellent mechanical stability and low-surface roughness. However, great challenges remain for achieving simple, cost-effective, and environmentally friendly manufacturing of FTEs with embedded metal mesh. In this work, a vacuum-free, mask-free, and plating-free fabrication technique is proposed for FTEs with embedded silver (Ag) mesh by combining an ink-jet printing technique and a newly developed eco-friendly polymer (polyvinyl a

Style APA, Harvard, Vancouver, ISO itp.

33

Shandra, Anastasiia, Ke Li, Dahnan Spurling, Oskar Ronan, and Valeria Nicolosi. "Aerosol Jet Printed MXene Microsupercapacitors for Flexible and Washable Textile Energy Storage." Advanced Functional Materials, June 23, 2025. https://doi.org/10.1002/adfm.202510255.

Pełny tekst źródła

Streszczenie:

AbstractWearable electronic textiles (e‐textiles) require flexible, lightweight, and durable energy storage. Herein, a high‐resolution aerosol jet printing (AJP) technology is introduced to fabricate current collector‐free microsupercapacitors (MSCs) directly onto textiles using an additive‐free, aqueous Ti3C2Tx MXene ink. The excellent pseudocapacitance, conductivity, and solution‐processability of Ti3C2Tx enable uniform, binder‐free coatings. The resulting MXene@Fabric electrodes deliver up to 4.4 F cm−2 (at 5 mV s−1) areal capacitance, excellent rate capability, and near‐100% capacitance re

Style APA, Harvard, Vancouver, ISO itp.

34

Panahi‐Sarmad, Mahyar, Ahmadreza Ghaffarkhah, Lukas Alexander Bauman, et al. "Liquid Printing in Nanochitin Suspensions: Interfacial Nanoparticle Assembly Toward Volumetric Elements, Organic Electronics and Core–Shell Filaments." Small Methods, March 3, 2025. https://doi.org/10.1002/smtd.202500100.

Pełny tekst źródła

Streszczenie:

AbstractA nanoparticle‐nanoparticle assembly is introduced using electrostatic complexation to precisely control volumetric structuring at the water/alcohol interface. In this system, an aqueous graphene oxide (GO) ink interacts electrostatically with partially deacetylated chitin nanofibers (mChNF), modified with benzophenone and dispersed in 1‐butanol, which serves as the external phase. Upon extrusion of the GO ink, a jammed interfacial network forms, stabilizing the printed patterns within the external suspension, which provides suitable viscoelasticity for support‐free printing. This appr

Style APA, Harvard, Vancouver, ISO itp.

35

Neoh, Siew Peng, Anak Khantachawana, Peerapong Santiwong, Rochaya Chintavalakorn, and Toemsak Srikhirin. "Effect of post-processing on the surface, optical, mechanical, and dimensional properties of 3D-printed orthodontic clear retainers." Clinical Oral Investigations 29, no. 1 (2025). https://doi.org/10.1007/s00784-024-06120-4.

Pełny tekst źródła

Streszczenie:

Abstract Objectives To address the high surface roughness and poor optical properties of three-dimensional (3D) printed orthodontic clear retainers, an alternative post-processing protocol was investigated with the goal of achieving improved surface, optical, and mechanical properties while preserving dimensional accuracy. Materials and methods Samples were prepared from two biocompatible methacrylate-based 3D-printing resins (Formlabs Dental LT Clear V2, NextDent OrthoFlex) and one thermoplastic material (Duran). For the 3D-printed resins, one group was post-processed by rinsing in isopropyl

Style APA, Harvard, Vancouver, ISO itp.

36

Lotsman, Kristina A., Dmitriy E. Samoylenko, Konstantin S. Rodygin, and Valentine P. Ananikov. "3D Printable Materials Based on Renewable Polymers from Terpene Alcohols and Calcium Carbide." ChemistrySelect 9, no. 31 (2024). http://dx.doi.org/10.1002/slct.202401273.

Pełny tekst źródła

Streszczenie:

AbstractThe transition to a sustainable future requires the use of waste‐free technologies for production. Potentially, additive technologies can be a promising approach for accessing circular economy due to the precise amount of feeding materials and the absence of molds. However, the initial feeding materials for additive approaches are often based on non–renewable hydrocarbon sources. This work focused on the use of polymers derived from terpene alcohols to develop a filament suitable for 3D printing. Initially, the vinylation of menthol using calcium carbide was optimized and scaled up, th

Style APA, Harvard, Vancouver, ISO itp.

37

Wise, Jenny, and Lesley McLean. "Making Light of Convicts." M/C Journal 24, no. 1 (2021). http://dx.doi.org/10.5204/mcj.2737.

Pełny tekst źródła

Streszczenie:

Introduction The social roles of alcohol consumption are rich and varied, with different types of alcoholic beverages reflecting important symbolic and cultural meanings. Sparkling wine is especially notable for its association with secular and sacred celebrations. Indeed, sparkling wine is rarely drunk as a matter of routine; bottles of such wine signal special occasions, heightened by the formality and excitement associated with opening the bottle and controlling (or not!) the resultant fizz (Faith). Originating in England and France in the late 1600s, sparkling wine marked a dramatic shift

Style APA, Harvard, Vancouver, ISO itp.

38

Aye, Myat Thu, Phyu Phyu Thein Dr., and Ni Win Ni. "Buddhist Councils and their Effect on Buddhist Literature." North American Academic Research 2, no. 8 (2019). https://doi.org/10.5281/zenodo.3364846.

Pełny tekst źródła

Streszczenie:

<em>This paper is presented with a view to enabling to know that the dhammas preached by the Buddha are existing well organized as Buddhist Literature in the forms of Sutta, Vinaya and Dhamma due to the benefits of the six conventions of Sa</em><em>ṅgāyanā </em><em>that are accepted by the Theravada Buddhists. After the </em><em>Parinibbāna </em><em>of the Buddha, the dhammas preached by the Buddha for 45 years were systematically collected after questioning, answering and collective recitation. Moreover the dhammas that were scattered could be analytically collected and recorded as a literatu

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!