Gotowa bibliografia na temat „Ammonium chloride ftir spectrum”

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Ammonium chloride ftir spectrum”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Ammonium chloride ftir spectrum"

1

Sivasankari, B., and P. Selvarajan. "Growth and Characterization of ULMA Single Crystals Doped with Ammonium Chloride." Journal of Materials 2013 (March 31, 2013): 1–7. http://dx.doi.org/10.1155/2013/216732.

Pełny tekst źródła
Streszczenie:
Single crystals of pure and ammonium chloride-doped urea L-malic acid (ULMA) were grown by slow evaporation technique. Many interesting results on several properties of ammonium chloride impurity added to ULMA single crystals have been observed and studied. The different morphology of ammonium chloride-doped ULMA crystals was noticed and the effect of ammonium chloride doping on the growth, optical, and hardness properties has been investigated. The presence of functional groups has been estimated by FTIR analysis. The lattice parameters of the grown crystals were studied by single crystal X-r
Style APA, Harvard, Vancouver, ISO itp.
2

Li, Li Wei, Qing Guo Tang, Jin Sheng Liang, Fei Wang, and Chong Yan Ren. "Effect of Surface Active Agent on Defibering for Sepiolite Fiber Bundles." Advanced Materials Research 96 (January 2010): 49–54. http://dx.doi.org/10.4028/www.scientific.net/amr.96.49.

Pełny tekst źródła
Streszczenie:
The cationic surfactant-octadecyl trimethyl ammonium chloride was added to the mixture of sepiolite powders and water with mechanical stirring. The effect of cationic surfactant on the defibering of fiber bundles was studied. The samples were characterized by X-Ray diffraction (XRD), bulk density, scanning electron microscope (SEM), FT-IR spectrum (FTIR) and thermal conductivity. The results indicated that the surface active agent could protect the structure of sepiolite fibers effectively, the bulk density and the thermal conductivity of the fibers could reach 0.06g/cm3 and 0.042W/(m.K), resp
Style APA, Harvard, Vancouver, ISO itp.
3

S., Anitha, Ganapathi M., and Ravi A. "SYNTHESIS OF SUBSTITUTED SULFONAMIDE BEARING IMIDAZOLE DERIVATIVES AND ITS CHARACTERIZATION." International Journal of Applied and Advanced Scientific Research 1, no. 2 (2017): 1–4. https://doi.org/10.5281/zenodo.256148.

Pełny tekst źródła
Streszczenie:
The sulfonamide bearing imidazole derivatives have been synthesized via two stages of chemical reactions. In a first stage, various substituted benzaldehyde condensed with benzil and ammonium acetate in presence L-Proline served as green catalyst. In a second stage, the series of substituted imidazole derivatives were reacted with benzene sulfonyl chloride in the presence of triethyl amine base. All synthesized compounds were characterized by various spectral techniques like UV-Visible, FTIR and <sup>1</sup>H NMR spectral analysis respectively. UV- Visible and FTIR spectra of each of the synth
Style APA, Harvard, Vancouver, ISO itp.
4

Li, He Ping, Yang Hu, Hu Qiang Lv, Yong Zhe Yang, and Yao Zhang. "Synthesis of Double Crosslinked Amphoteric Cassava Starch Resin and Performance of Absorbing Cu (II)." Advanced Materials Research 726-731 (August 2013): 588–91. http://dx.doi.org/10.4028/www.scientific.net/amr.726-731.588.

Pełny tekst źródła
Streszczenie:
Sodium polyphosphate-crosslinked starch was synthesized by using cassava starch and sodium polyphosphate as main material and crosslinked agent individually. On above basis, double crosslinked amphoteric cassava starch resin was synthesized by N,N'-methylene bisacrylamide as inner-crosslinked agent, dimethyl diallyl ammonium chloride (DMDAAC) and acrylic acid as amphoteric grafted monomer. The product was characterized by infrared spectrum (FTIR). The results indicate that the cassava starch was modified successfully, and the final product was double crosslinked amphoteric cassava starch resin
Style APA, Harvard, Vancouver, ISO itp.
5

Lu, Yan Hua, and Jia Qi Wang. "Preparation and Antimicrobial Activity of N-(2-hydroxy-3-trimethylamine) Propyl Chitosan Chloride Nanoparticles." Applied Mechanics and Materials 685 (October 2014): 55–58. http://dx.doi.org/10.4028/www.scientific.net/amm.685.55.

Pełny tekst źródła
Streszczenie:
N-(2-hydroxy-3-trimethylamine) propyl chitosan chloride (HTCC) nanoparticles were prepared through two-step method using chitosan with low molecular weight and high degree of deacetylation. H of-NH2of chitosan was replaced with quaternary ammonium salt groups to form HTCC. HTCC was further modified by ion sol-gel reaction with sodium tripolyphosphate, the reaction can be in the dispersion under the action of Span-80, and the ionic bonds formed between phosphate group of sodium tripolyphosphate and the amino group in HTCC main chain, well dispersed HTCC nanoparticles with a average diameter of
Style APA, Harvard, Vancouver, ISO itp.
6

Li, Chengtao, Deyi Kong, Xiaolong Yao, Xiaotao Ma, Chunhui Wei, and Hong Wang. "Resource Recycling Utilization of Distillers Grains for Preparing Cationic Quaternary Ammonium—Ammonium Material and Adsorption of Acid Yellow 11." Sustainability 14, no. 4 (2022): 2469. http://dx.doi.org/10.3390/su14042469.

Pełny tekst źródła
Streszczenie:
Using distillers grains (DG) as raw material after pre-treatment with sodium hydroxide (NaOH) and modified with cationic etherification agent 3-chloro-2-hydroxypropyltrimethylammonium chloride (CHPTAC), cationic quaternary ammonium distillers grains adsorption material (CDG) was successfully prepared. The optimal adsorption conditions were an adsorption temperature of 25 °C, adsorption time of 180 min, amount of adsorbent at 8.5 g/L, initial dye concentration of 100 mg/L, and pH of dye solution 7.0. The structure of CDG was characterized by FTIR, EDS, SEM, BET, ultraviolet spectrum analysis, a
Style APA, Harvard, Vancouver, ISO itp.
7

Rasheed, Rashed T., Liblab S. Jassim, Hamsa A. Easa, and Shaymaa H. Khazaal. "Preparation and Characterization of CuO Nanoparticles Prepared by Chemical Method." Materials Science Forum 1021 (February 2021): 68–77. http://dx.doi.org/10.4028/www.scientific.net/msf.1021.68.

Pełny tekst źródła
Streszczenie:
Copper oxide (CuO) nanoparticles were prepared by the sol-gel method, by the reaction of copper chloride and ammonium hydroxide as procurers. Nanopowders are annealing at different temperatures (100 °C, 200 °C, and 600 °C) for 120 min and confirmed the monoclinic phase by X-ray diffraction analysis of the metal oxide with lattice parameters a = 4.694 Å, b = 3.456 Å and c = 5.165Å for annealing temperature 400°C. Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), and UV-Visible Spectroscopy spectrum was used to determine the str
Style APA, Harvard, Vancouver, ISO itp.
8

K.Sarjuna and D.Ilangeswaran. "Synthesis of some metal/metal sulfide nanoparticles using a superior dissolvable media- Malonic acid (MA) based Deep Eutectic Solvents[DES]." Abstracts of International Conferences & Meetings (AICM) 1, no. 5 (2021): 14. https://doi.org/10.5281/zenodo.5371643.

Pełny tekst źródła
Streszczenie:
<strong>Introduction</strong>: A DES may be a liquid upto 100 &deg;C, composed of two or three cheap and safe components (1). However, the widely used method for the preparation of DES is that the heating method (2). Increasing applications of nanoparticles (NPs), such as metal oxide and metal sulfide NPs, lead to heightened environmental concern. The prepared DESs were used as a medium to synthesize cadmium and mercury sulfide nanoparticles via chemical co-precipitation method. Cadmium NPs were synthesised by cadmium (II) chloride with yellow Ammonium sulfide and Mercury NPs by mercury (II) c
Style APA, Harvard, Vancouver, ISO itp.
9

Dhlamini, Khanyisile S., Cyril T. Selepe, Bathabile Ramalapa, et al. "Dual Antimicrobial Activity of HTCC and Its Nanoparticles: A Synergistic Approach for Antibacterial and Antiviral Applications Through Combined In Silico and In Vitro Studies." Polymers 16, no. 21 (2024): 2999. http://dx.doi.org/10.3390/polym16212999.

Pełny tekst źródła
Streszczenie:
N-(2-hydroxyl) propyl-3-trimethyl ammonium chitosan chloride (HTCC), a quaternized chitosan derivative, has been shown to exhibit a broad spectrum of antimicrobial activity, especially against bacteria and enveloped viruses. Despite this, molecular docking studies showing its atomic-level mechanisms against these microorganisms are scarce. Here, for the first time, we employed molecular docking analyses to investigate the potential antibacterial activity of HTCC against Staphylococcus aureus and its antiviral activity against human immunodeficiency virus 1 (HIV-1). According to the findings, H
Style APA, Harvard, Vancouver, ISO itp.
10

Moya, Roger, Johanna Gaitán-Álvarez, Alexander Berrocal, and Karla J. Merazzo. "In Situ Synthesis of Fe3O4 Nanoparticles and Wood Composite Properties of Three Tropical Species." Materials 15, no. 9 (2022): 3394. http://dx.doi.org/10.3390/ma15093394.

Pełny tekst źródła
Streszczenie:
Magnetic wood is a composite material that achieves harmony between both woody and magnetic functions through the active addition of magnetic characteristics to the wood itself. In addition to showing magnetic characteristics, magnetic wood offers low specific gravity, humidity control and acoustic absorption ability. It has potential for broad applications in the fields of electromagnetic wave absorption, electromagnetic interference shielding, furniture, etc. This work reports on the synthesis of Fe3O4 nanoparticles (NPs) in wood from three tropical species (Pinus oocarpa, Vochysia ferrugine
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Ammonium chloride ftir spectrum"

1

Khan, A. Z., and Z. S. Khan. "Effect of Glycine Dopant on FTIR Spectrum of Ammonium Dihydrogen Phosphate (ADP) Crystal Grown by Slow Evaporation, Rotation and SR Methods." In New Trends in Physical Science Research Vol. 6. Book Publisher International (a part of SCIENCEDOMAIN International), 2022. http://dx.doi.org/10.9734/bpi/ntpsr/v6/2314a.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Ammonium chloride ftir spectrum"

1

Kramer, Jeffrey F. "A New High Performance Quaternary Phosphonium Biocide for Biofouling Control in Industrial Water Systems." In CORROSION 2006. NACE International, 2006. https://doi.org/10.5006/c2006-06093.

Pełny tekst źródła
Streszczenie:
Abstract Quaternary ammonium based biocides have been used for microbiological control in industrial water systems for more than 40 years. While they have good activity versus algae, they can cause problems with foaming or react negatively with anionic additives. More recently, quaternary phosphonium based biocides have been introduced. While they overcome some of the issues with quaternary ammonium based biocides, they lack surface activity and are incompatible with halogens. We report here on a new quaternary phosphonium biocide based on tributyl tetradecyl phosphonium chloride (TTPC). TTPC
Style APA, Harvard, Vancouver, ISO itp.
2

Andrews, Lester. "Matrix FTIR spectroscopy of transient species." In OSA Annual Meeting. Optica Publishing Group, 1989. http://dx.doi.org/10.1364/oam.1989.wi1.

Pełny tekst źródła
Streszczenie:
Matrix studies featuring the FTIR instrumental advantages of resolution and sensitivity for a finite amount of time are described. Ammonia clusters have a complicated spectrum in the N–H stretching region. One antisymmetric and two symmetric stretching modes in the dimer verify an asymmetric cyclic dimer structure.1 Chlorine isotopic splittings have been resolved for the four H/D substituted (HC1)3 species, which confirm the cluster stoichiometry and triangular structure.2 The ammonia/hydrogen cyanide system reveals 1:1 and 1:2 complexes, which are identified from their FTIR spectra and charac
Style APA, Harvard, Vancouver, ISO itp.
3

Armstrong, Charles D., Luiza Andrade, and Renato M. DePaula. "Effect of Monovalent and Divalent Cations on the Biocidal Efficacy of Quaternary Cationic Biocides – A Salty Situation." In SPE International Conference on Oilfield Chemistry. SPE, 2025. https://doi.org/10.2118/224261-ms.

Pełny tekst źródła
Streszczenie:
Abstract Quaternary Cationic Biocides (ammonium and phosphonium based) are broad spectrum and fast acting. Due to their compatibility, low cost, and high effectiveness, they are often used as biocides in oil and gas operations alone and also as formulation components for multi-biocide packages. They have also found use as additives in corrosion inhibitor formulations, emulsifiers, nonemulsifiers, and even as scale inhibitors. While they tend to work well in fresh water where there is little to no salt present, they are shown to provide decreasing performance as the salt concentration increases
Style APA, Harvard, Vancouver, ISO itp.
4

"Investigation on the Impact of Thiourea on L-Proline Cadmium Chloride Single Crystal." In The International Conference on scientific innovations in Science, Technology, and Management. International Journal of Advanced Trends in Engineering and Management, 2023. http://dx.doi.org/10.59544/nuuc4782/ngcesi23p102.

Pełny tekst źródła
Streszczenie:
Pure and thiourea doped single crystals of L-proline cadmium chloride monohydrate were grown by slow evaporation method at room temperature. The SXRD analysis gives the details about the lattice parameters and crystal system. EDAX spectrum corroborated the incorporation of C, H, S, Cd, Cl in doped single crystal. FTIR analysis confirms the presence of various functional groups in the title material. The UV transmittance spectrum confirms the increase in transparency of the doped crystal. The green light emission of the title material was attributed by fluorescence analysis. The mechanical anal
Style APA, Harvard, Vancouver, ISO itp.
5

Chen, Kok Hao, and Jong Hyun Choi. "DNA Oligonucleotide-Templated Nanocrystals: Synthesis and Novel Label-Free Protein Detection." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-11958.

Pełny tekst źródła
Streszczenie:
Semiconductor and magnetic nanoparticles hold unique optical and magnetic properties, and great promise for bio-imaging and therapeutic applications. As part of their stable synthesis, the nanocrystal surfaces are usually capped by long chain organic moieties such as trioctylphosphine oxide. This capping serves two purposes: it saturates dangling bonds at the exposed crystalline lattice, and it prevents irreversible aggregation by stabilizing the colloid through entropic repulsion. These nanocrystals can be rendered water-soluble by either ligand exchange or overcoating, which hampers their wi
Style APA, Harvard, Vancouver, ISO itp.
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!