Zaloguj się

Gotowe bibliografie tematyczne / Amplifiers, Radio frequency / Rozprawy doktorskie

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Amplifiers, Radio frequency.

Rozprawy doktorskie na temat „Amplifiers, Radio frequency”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 27 stycznia 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Amplifiers, Radio frequency”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.

1

Kunselman, Gary L. "Radio frequency power amplifiers for portable communication systems." Thesis, Virginia Tech, 1992. http://hdl.handle.net/10919/41493.

Pełny tekst źródła

Streszczenie:

<p>Portable communication systems require, in part, high-efficiency radio frequency power amplifiers (RF PA) if battery lifetime is to be conserved. Conventional amplifier classifications and definitions are presented in a unified and concise format. The Bipolar Junction Transistor (BJT) and Metal-Semiconductor Field Effect Transistor (MESFET) are evaluated as active devices in high-efficiency RF PA designs. Two amplifier classes (class CE and class F) meet the system requirements of an 850 MHz operating frequency, a power output of 3 W, a battery supply voltage of 9 Vdc, and a sinusoidal-type

Style APA, Harvard, Vancouver, ISO itp.

2

Cui, Xian. "Efficient radio frequency power amplifiers for wireless communications." Columbus, Ohio : Ohio State University, 2007. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1195652135.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Fedorenko, Pavlo. "Phase distortion in envelope elimination and restoration radio frequency power amplifiers." Diss., Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/34822.

Pełny tekst źródła

Streszczenie:

The objective of this research is to analyze and improve linearity of envelope elimination and restoration (EER) radio frequency (RF) power amplifiers. Envelope elimination and restoration was compared to other efficiency enhancement techniques and determined to likely be the most suitable solution for implementation of multimode, multiband portable RF transmitters. Distortion, stemming from dynamic power-supply modulation of RF transistors in EER RF power amplifiers was identified as one of the key challenges to the development of commercially viable EER transmitters. This dissertation presen

Style APA, Harvard, Vancouver, ISO itp.

4

Kim, Hyungwook. "CMOS radio-frequency power amplifiers for multi-standard wireless communications." Diss., Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/44786.

Pełny tekst źródła

Streszczenie:

The development of multi-standard wireless communication systems with low cost and high integration is continuously requested and accompanied by the explosive growth of the wireless communication market. Although CMOS technology can provide most building blocks in RF transceivers, the implementation of CMOS RF power amplifiers is still a challenging task. The objective of this research is to develop design techniques to implement fully-integrated multi-mode power amplifiers using CMOS technology. In this dissertation, a load modulation technique with tunable matching networks and a pre-distor

Style APA, Harvard, Vancouver, ISO itp.

5

Myoung, Suk Keun. "Low frequency feedforward and predistortion linearization of RF power amplifiers." Columbus, Ohio : Ohio State University, 2006. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1150416616.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Landin, Per. "Digital Baseband Modeling and Correction of Radio Frequency Power Amplifiers." Doctoral thesis, KTH, Signalbehandling, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-94762.

Pełny tekst źródła

Streszczenie:

Aspects related to behavioral modeling and correction of distortions for radio frequency (RF) power amplifiers (PAs) are treated in the thesis. When evaluating the performance of a behavioral model it is important to, first of all, use an evaluation criterion, and second, make sure that the criterion actually tells something about the behavior one wishes to describe. This is used in the weighted error spectral power ratio (WESPR) criterion by means of a frequency dependent weighting function. When the parameters of the models are estimated a suitable error criterion should likewise be used.

Style APA, Harvard, Vancouver, ISO itp.

7

Hella, Mona Mostafa. "CMOS radio frequency power amplifiers for short-range wireless standards /." The Ohio State University, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=osu1486399160107527.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Warr, Paul. "Octave-band feedforward linearisation for software defined radio receiver amplifiers." Thesis, University of Bristol, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.340270.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Mugisho, Moise Safari. "Design of a high efficiency S-band power amplifier for a Cubesat." Thesis, Cape Peninsula University of Technology, 2016. http://hdl.handle.net/20.500.11838/2454.

Pełny tekst źródła

Streszczenie:

Thesis (MTech (Electrical Engineering))--Cape Peninsula University of Technology, 2016.<br>In all radio frequency (RF) electronic communication systems, power amplifiers (PAs) are used to generate the final transmitted signal. Specifically, these PAs are used to increase the output power of the transmitted signal. The PA accomplishes this by converting the applied direct current (DC) power to the PA into RF power, while being driven by a RF input signal. The portion of DC power that is not converted into RF power is dissipated as heat. The power conversion mechanism that takes place in a PA is

Style APA, Harvard, Vancouver, ISO itp.

10

Isaksson, Magnus. "Radio Frequency Power Amplifiers : Behavioral Modeling, Parameter Reduction, and Digital Predistortion." Doctoral thesis, KTH, Signalbehandling, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-24198.

Pełny tekst źródła

Streszczenie:

This work considers behavioral modeling, parameter-reduction, and digital predistortion of radio frequency power amplifiers. Due to the use of modern digital modulation methods, contemporary power amplifiers are frequently subjected to signals characterized by considerable bandwidths and fast changing envelopes. As a result, traditional quasi-memoryless amplitudeto-amplitude (AM/AM) and amplitude-to-phase (AM/PM) characteristics are no longer sufficient to describe and model the behavior of power amplifiers; neither can they be successfully used for linearization. In this thesis, sampled input

Style APA, Harvard, Vancouver, ISO itp.

11

Boloorian, Majid. "Linearisation of radio frequency power amplifiers using the Cartesian feedback technique." Thesis, University of Bristol, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.261369.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Franco, Marcelo Jorge Herczfeld Peter R. "Wideband digital predistortion linearization of radio frequency power amplifiers with memory /." Philadelphia, Pa. : Drexel University, 2005. http://dspace.library.drexel.edu/handle/1860/485.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Brand, Konrad Frederik. "The experimental design and characterisation of Doherty power amplifiers." Thesis, Link to the online version, 2006. http://hdl.handle.net/10019.1/2594.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Chan, kwong Fu. "Large-signal characterization/modeling and linearization techniques for RF power amplifiers /." View abstract or full-text, 2004. http://library.ust.hk/cgi/db/thesis.pl?ELEC%202004%20CHANK.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

Abbasian, Sadegh. "Radio frequency switch mode power amplifiers and synchronous rectifiers for wireless applications." Thesis, University of British Columbia, 2015. http://hdl.handle.net/2429/55218.

Pełny tekst źródła

Streszczenie:

This thesis focuses on identifying and evaluating device, circuit, and system level issues that affect the power efficiency of class-D and class-F switch-mode amplifiers, and class-F synchronous rectifiers. The amplifier and rectifier circuits are used to implement pulse encoded switch-mode power amplifier systems. A detailed power efficiency analysis of current mode class-D amplifiers is presented for variable duty cycle pulse trains. A device model with current saturation in the switch is introduced and gives insight into how to select an appropriate load line for variable duty cycle switchi

Style APA, Harvard, Vancouver, ISO itp.

16

Rafla, Ramez. "Integrated inductor modeling and CMOS low noise amplifiers for radio-frequency applications." Thesis, McGill University, 2001. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=32971.

Pełny tekst źródła

Streszczenie:

A large demand for bandwidth, both for voice and data communication, has increased the need for high-speed systems. Specifically, a wireless revolution is establishing renewed standards and design requirements, such as higher operation frequencies and higher levels of integration.<br>The improved performance of traditional technologies, such as CMOS, which used to be geared towards digital circuits running at lower frequencies, makes them now suitable for Radio-Frequency applications. The challenge is not only to design RF systems, but also to establish design methodologies for their building-

Style APA, Harvard, Vancouver, ISO itp.

17

Jurkov, Alexander S. "Lossless multi-way power combining and outphasing for radio frequency power amplifiers." Thesis, Massachusetts Institute of Technology, 2013. http://hdl.handle.net/1721.1/79230.

Pełny tekst źródła

Streszczenie:

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2013.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 102-106).<br>For applications requiring the use of power amplifiers (PAs) operating at high frequencies and power levels, it is often preferable to construct multiple low power PAs and combine their output powers to form a high-power PA. Moreover, such PAs must often be able to provide dynamic control of their output power over a wide range, and maintain high efficiency across their operating range.

Style APA, Harvard, Vancouver, ISO itp.

18

Chen, Yi-Jan Emery. "Development of integrated RF CMOS power amplifiers for wireless communications." Diss., Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/14821.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Lotter, Paul. "Development of feedforward RF power amplifier." Thesis, Cape Peninsula University of Technology, 2006. http://hdl.handle.net/20.500.11838/2206.

Pełny tekst źródła

Streszczenie:

Thesis (MTech(Electrical Engineering))--Cape Peninsula University of Technology, 2006.<br>Electronic communication systems have become an integral part of our everyday lives. RF (Radio Frequency) power amplifiers form part of the fundamental building blocks of an electronic communication system. RF power amplifiers can also be one of the major causes of distortion in an electronic communication system. This thesis describes the linearity requirement for a RF power amplifier that is used in a transmitter section of an electronic communication system. Furthermore, five different linearisat

Style APA, Harvard, Vancouver, ISO itp.

20

Mbeutcha, France Gaspari. "A High-Side Wideband Current and Voltage Sensor for Radio-Frequency Power Amplifiers." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019. http://amslaurea.unibo.it/17464/.

Pełny tekst źródła

Streszczenie:

The radio-frequency power amplifier (RF PA) is one of the critical elements within the wireless, as it is expected to provide a suitable output power with high efficiency and linearity. Improving the power efficiency of the RF power amplifier is a key challenge of the modern wireless communications, especially in the presence of wideband modulations signals. In fact, to achieve this goal, various techniques are investigated, including supply voltage modulation (e.g., envelope- tracking). In the supply-modulated Pas employed in modern telecom base stations, it is important to measure the dynami

Style APA, Harvard, Vancouver, ISO itp.

21

Ko, Yus. "Design and optimization of 5GHz CMOS power amplifiers with the differential load-pull techniques." [Gainesville, Fla.] : University of Florida, 2005. http://purl.fcla.edu/fcla/etd/UFE0013036.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

Gibiino, Gian Piero <1986&gt. "Nonlinear Characterization and Modeling of Radio-Frequency Devices and Power Amplifiers with Memory Effects." Doctoral thesis, Alma Mater Studiorum - Università di Bologna, 2016. http://amsdottorato.unibo.it/7383/.

Pełny tekst źródła

Streszczenie:

Despite the fast development of telecommunications systems experienced during the last two decades, much progress is expected in the coming years with the introduction of new solutions capable of delivering fast data-rates and ubiquitous connectivity. However, this development can only happen through the evolution of radio-frequency systems, which should be capable of working at high-power and high-speed. At the same time, the power dissipation of these systems should be minimized. In this dissertation, methods for the characterization and modeling of transistors and power amplifiers are prese

Style APA, Harvard, Vancouver, ISO itp.

23

Fioravanti, Paolo. "Large signal design of silicon field effect transistors for linear radio frequency power amplifiers." Thesis, De Montfort University, 2006. http://hdl.handle.net/2086/13294.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Jha, Nand Kishore. "Design of a complementary silicon-germanium variable gain amplifier." Thesis, Atlanta, Ga. : Georgia Institute of Technology, 2008. http://hdl.handle.net/1853/24614.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

Silva, Clara Maria Apolinário Lucas da. "Low noise amplifiers' design for radioastronomy." Master's thesis, Universidade de Aveiro, 2014. http://hdl.handle.net/10773/14549.

Pełny tekst źródła

Streszczenie:

Mestrado em Engenharia Electrónica e Telecomunicações<br>Space exploration has always been an ambition to human kind. Nowadays the new technologies that could be used in radioastronomy field have made this goal even more attainable. The big manufacturers that produce the equipment and the necessary components have made a big reinforcement that boosted the creation of new colossal projects, such as the SKA. Within this bold project stands this thesis with the intention of establishing a new approach to the implementation of the recent technologies on the design of low noise amplifiers.

Style APA, Harvard, Vancouver, ISO itp.

26

Chen, Chih-Hung. "CMOS RF front-end design of a very narrowband transceiver with 0.18[micrometers]." To access this resource online via ProQuest Dissertations and Theses @ UTEP, 2008. http://0-proquest.umi.com.lib.utep.edu/login?COPT=REJTPTU0YmImSU5UPTAmVkVSPTI=&clientId=2515.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

Gray, Blake Raymond. "Design of RF and microwave parametric amplifiers and power upconverters." Diss., Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/43613.

Pełny tekst źródła

Streszczenie:

The objective of this research is to develop, characterize, and demonstrate novel parametric architectures capable of wideband operation while maintaining high gain and stability. To begin the study, phase-incoherent upconverting parametric amplifiers will be explored by first developing a set of analytical models describing their achievable gain and efficiency. These models will provide a set of design tools to optimize and evaluate prototype circuit boards. The prototype boards will then be used to demonstrate their achievable gain, bandwidth, efficiency, and stability. Further investiga

Style APA, Harvard, Vancouver, ISO itp.

28

Huang, Wenxiang. "A broadband RF CMOS frond-end for multi-standard wireless communication." Columbus, Ohio : Ohio State University, 2007. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1170882877.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

29

Nel, Christoffel Antonie. "The creation of nonlinear behavioral-level models for system level receiver simulation." Thesis, Stellenbosch : Stellenbosch University, 2004. http://hdl.handle.net/10019.1/50128.

Pełny tekst źródła

Streszczenie:

Thesis (MScEng)--Stellenbosch University, 2004.<br>ENGLISH ABSTRACT: The aim of this thesis was to investigate the use of behavioral level models in receiver simulations using the capabilities of Agilent's Advanced Design System. Behavioral level modeling has become increasingly attractive because it offers faster and easier results for system level simulations. The work in this thesis focused strongly on nonlinear measurements to characterize the various nonlinear phenomena that are present in amplifiers and mixers. Measurement automation software was developed to automate the process.

Style APA, Harvard, Vancouver, ISO itp.

30

Fourie, Paul. "Pulse power device characterization for amplifier design." Thesis, Stellenbosch : University of Stellenbosch, 2004. http://hdl.handle.net/10019.1/16323.

Pełny tekst źródła

Streszczenie:

Thesis (MSCIng)--University of Stellenbosch, 2004.<br>ENGLISH ABSTRACT: Bi-polar Si transistors optimized for pulse conditions is still the most popular choice as amplification element in the final stages of solid-state radar amplifiers in L and S band. With the radar market being small, the design data for these devices is normally fairly limited and it is up to the designers to thoroughly characterize them for their designs. This is normally done through loadpull experiments. Professional automated load-pull equipment is very expensive especially at the higher power levels. In spite of

Style APA, Harvard, Vancouver, ISO itp.

31

Jansen, Roelof. "Evaluation of Doherty Amplifier Implementations." Thesis, Stellenbosch : Stellenbosch University, 2008. http://hdl.handle.net/10019.1/20445.

Pełny tekst źródła

Streszczenie:

Thesis (MScIng)--Stellenbosch University, 2008.<br>ENGLISH ABSTRACT: Modern communication systems demand efficient, linear power amplifiers. The amplifiers are often operated in the backed-off power levels at which linear amplifiers such as class B amplifier are particularly inefficient. The Doherty amplifier provides an improvement as it increases efficiency at backed of power levels. Doherty amplifiers consists of two amplifiers, a carrier amplifier and a peaking amplifier, of which the output is combined in a novel way. Implementation of the Doherty amplifier with transistors is not id

Style APA, Harvard, Vancouver, ISO itp.

32

Mahdavi, Sareh. "RF power amplifiers and MEMS varactors." Thesis, McGill University, 2007. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=112576.

Pełny tekst źródła

Streszczenie:

This thesis is concerned with the design and implementation of radio frequency (RF) power amplifiers and micro-electromechanical systems---namely MEMS varactors. This is driven by the many wireless communication systems which are constantly moving towards increased integration, better signal quality, and longer battery life.<br>The power amplifier consumes most of the power in a receiver/transmitter system (transceiver), and its output signal is directly transmitted by the antenna without further modification. Thus, optimizing the PA for low power consumption, increased linearity, and compact

Style APA, Harvard, Vancouver, ISO itp.

33

Lou, Shuzuo. "Design of CMOS RF low-noise amplifiers and mixer for wireless applications /." View abstract or full-text, 2007. http://library.ust.hk/cgi/db/thesis.pl?ECED%202007%20LOU.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

Kim, Hyun-Woong. "CMOS RF transmitter front-end module for high-power mobile applications." Diss., Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/47592.

Pełny tekst źródła

Streszczenie:

With the explosive growth of the wireless market, the demand for low-cost and highly-integrated radio frequency (RF) transceiver has been increased. Keeping up with this trend, complimentary metal-oxide-semiconductor (CMOS) has been spotlighted by virtue of its superior characteristics. However, there are challenges in achieving this goal, especially designing the transmitter portion. The objective of this research is to demonstrate the feasibility of fully integrated CMOS transmitter module which includes power amplifier (PA) and transmit/receive (T/R) switch by compensating for the intrinsic

Style APA, Harvard, Vancouver, ISO itp.

35

Yu, Xin [Verfasser], and Georg [Akademischer Betreuer] Fischer. "Contributions to Digital Predistortion of Radio-Frequency Power Amplifiers for Wireless Applications / Xin Yu. Betreuer: Georg Fischer." Erlangen : Universitätsbibliothek der Universität Erlangen-Nürnberg, 2012. http://d-nb.info/1026365481/34.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

Pinarello, Sandro [Verfasser]. "Adaptive strategies for enhancing the efficiency of radio frequency power amplifiers in back-off operation / Sandro Pinarello." München : Verlag Dr. Hut, 2017. http://d-nb.info/1126297739/34.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

37

Hershberger, Kyle M. "In-situ S-Parameter Analysis and Applications." Thesis, Georgia Institute of Technology, 2014. http://hdl.handle.net/1853/51839.

Pełny tekst źródła

Streszczenie:

This thesis will begin with an investigation on the limitations associated with the predominate two-port stability analysis techniques with respect to multi-stage RF amplifier design. The primary focus will be to investigate and develop network analysis techniques that allow internal ports to be created within a RF circuit. This technique will facilitate the application of existing stability analysis techniques in ways that are not commonly known. Examples of situations where traditional network and stability analysis is insufficient will be presented, and the application of the newly develope

Style APA, Harvard, Vancouver, ISO itp.

38

Narasimha, Raju Divya. "Study of ESD effects on RF power amplifiers." Master's thesis, University of Central Florida, 2011. http://digital.library.ucf.edu/cdm/ref/collection/ETD/id/4993.

Pełny tekst źródła

Streszczenie:

Today, ESD is a major consideration in the design and manufacture of ICs. ESD problems are increasing in the electronics industry because of the increasing trend toward higher speed and smaller device sizes. There is growing interest in knowing the effects of ESD protection circuit on the performance of semiconductor integrated circuits (ICs) because of the impact it has on core RF circuit performance. This study investigated the impact of ESD protection circuit on RF Power amplifiers. Even though ESD protection for digital circuits has been known for a while, RF-ESD is a challenge. From a tho

Style APA, Harvard, Vancouver, ISO itp.

39

Yoon, Youngchang. "Reconfigurable CMOS RF power amplifiers for advanced mobile terminals." Diss., Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/48987.

Pełny tekst źródła

Streszczenie:

In recent years, tremendous growth of the wireless market can be defined through the following words: smartphone and high-data rate wireless communication. This situation gives new challenges to RF power amplifier design, which includes high-efficiency, multi-band operation, and robustness to antenna mismatch conditions. In addition to these issues, the industry and consumers demand a low-cost small-sized wireless device. A fully integrated single-chip CMOS transceiver is the best solution in terms of cost and level of integration with other functional blocks. Therefore, the effective approach

Style APA, Harvard, Vancouver, ISO itp.

40

Overstreet, William Patton. "VHF bipolar transistor power amplifiers: measurement, modeling, and design." Diss., Virginia Polytechnic Institute and State University, 1986. http://hdl.handle.net/10919/71166.

Pełny tekst źródła

Streszczenie:

Widely used design techniques for radio frequency power amplifiers yield results which are approximate; the initial design is usually refined by applying trial-and-error procedures in the laboratory. More accurate design techniques are complicated in their application and have not gained acceptance by practicing engineers. A new design technique for VHF linear power amplifiers using bipolar junction transistors is presented in this report. This design technique is simple in its application but yields accurate results. The design technique is based upon a transistor model which is simple enou

Style APA, Harvard, Vancouver, ISO itp.

41

Li, Jia, and 李佳. "Photonic microwave processor based on fiber optical parametric amplifier." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2009. http://hub.hku.hk/bib/B43085374.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

Li, Jia. "Photonic microwave processor based on fiber optical parametric amplifier." Click to view the E-thesis via HKUTO, 2009. http://sunzi.lib.hku.hk/hkuto/record/B43085374.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

Choi, Kiyong. "Parasitic-aware design and optimization of CMOS RF power amplifier /." Thesis, Connect to this title online; UW restricted, 2003. http://hdl.handle.net/1773/6078.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

Glock, Stefan [Verfasser]. "Semi-Physical Behavioral Modeling of Radio Frequency Power Amplifiers for the Optimization of the Linearity-Efficiency Tradeoff / Stefan Glock." München : Verlag Dr. Hut, 2014. http://d-nb.info/1058284975/34.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

Sahu, Biranchinath. "Integrated, Dynamically Adaptive Supplies for Linear RF Power Amplifiers in Portable Applications." Diss., Georgia Institute of Technology, 2004. http://hdl.handle.net/1853/7607.

Pełny tekst źródła

Streszczenie:

Energy-efficient radio frequency (RF) power amplifiers (PAs) are critical and paramount to achieve longer battery life in state-of-the-art portable systems because they typically determine and dominate the power consumption of such devices. In this dissertation, a high-efficiency, linear RF PA with a dynamically adaptive supply and bias current control for code division multiple access (CDMA) and wideband CDMA (WCDMA) is conceived, simulated, and experimentally demonstrated with a discrete PCB-level design and in integrated circuit (IC) form. The PA efficiency is improved by dynamically adjust

Style APA, Harvard, Vancouver, ISO itp.

46

Mays, Kenneth W. "A 40 GHz Power Amplifier Using a Low Cost High Volume 0.15 um Optical Lithography pHEMT Process." PDXScholar, 2013. https://pdxscholar.library.pdx.edu/open_access_etds/552.

Pełny tekst źródła

Streszczenie:

The demand for higher frequency applications is largely driven by bandwidth. The evolution of circuits in the microwave and millimeter frequency ranges always demands higher performance and lower cost as the technology and specification requirements evolve. Thus the development of new processes addressing higher frequencies and bandwidth requirements is essential to the growth of any semiconductor company participating in these markets. There exist processes which can perform in the higher frequency design space from a technical perspective. However, a cost effective solution must complement t

Style APA, Harvard, Vancouver, ISO itp.

47

Hietakangas, S. (Simo). "Design methods and considerations of supply modulated switched RF power amplifiers." Doctoral thesis, Oulun yliopisto, 2012. http://urn.fi/urn:isbn:9789514298363.

Pełny tekst źródła

Streszczenie:

Abstract This thesis studies the design methods and properties of supply-modulated switch-mode radio frequency power amplifiers. Besides simulation based studies and theory review, two amplifiers were designed: a discrete MESFET class E amplifier (0.5 W at 1 GHz), and an integrated pHEMT class E-1 amplifier (2.0 W at 1.6 GHz) with an on-chip resonator. The existing design methods of the resonant output network of switching amplifiers were reviewed and some extensions on the handling of nonlinear capacitances were proposed. The effects of varying supply voltage were studied and suggestions were

Style APA, Harvard, Vancouver, ISO itp.

48

Kim, Jihwan. "High performance radio-frequency and millimeter-wave front-end integrated circuits design in silicon-based technologies." Diss., Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/44704.

Pełny tekst źródła

Streszczenie:

Design techniques and procedures to improve performances of radio-frequency and millimeter-wave front-end integrated circuits were developed. Power amplifiers for high data-rate wireless communication applications were designed using CMOS technology employing a novel device resizing and concurrent power-combining technique to implement a multi-mode operation. Comprehensive analysis on the efficiency degradation effect of multi-input-single-output combining transformers with idle input terminals was performed. The proposed discrete resizing and power-combining technique effectively enhanced the

Style APA, Harvard, Vancouver, ISO itp.

49

Thrivikraman, Tushar. "Analysis and Design of Low-Noise Amplifiers in Silicon-Germanium Hetrojunction Bipolar Technology for Radar and Communication Systems." Thesis, Georgia Institute of Technology, 2007. http://hdl.handle.net/1853/19755.

Pełny tekst źródła

Streszczenie:

This thesis presents an overview of the simulation, design, and measurement of state-of-the-art Silicon-Germanium Hetro-Junction Bipolar Transistor (SiGe HBT) low-noise amplifiers (LNAs). The LNA design trade-off space is presented and methods for achieving an optimized design are discussed. In Chapter 1, we review the importance of LNAs and the benefits of SiGe HBT technology in high frequency amplifier design. Chapter 2 introduces LNA design and basic noise theory. A graphical LNA design approach is presented to aid in understanding of the high-frequency LNA design process. Chapter 3

Style APA, Harvard, Vancouver, ISO itp.

50

Zhu, Changwen. "Nonlinear Analysis and Digital Pre-Distortion of the SC-FDMA Signals in LTE Uplink System." PDXScholar, 2015. https://pdxscholar.library.pdx.edu/open_access_etds/2105.

Pełny tekst źródła

Streszczenie:

Single-carrier frequency division multiple access (SC-FDMA) has become a popular alternative to orthogonal frequency division multiple access (OFDM) in multi-user communication on LTE uplink systems. This is primarily due to the low peak-to-average power ratio (PAPR) of SC-FDMA compared to that of OFDM. Long-term evolution (LTE) uses SC-FDMA on the uplink to exploit this PAPR advantage to reduce transmit power amplifier (PA) back-off in mobile user terminals. However, the latest generation of communication systems requires high power efficiency and a large quantity of capacity in transmitting

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!