Gotowa bibliografia na temat „Anisotropie materiálu”
Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych
Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Anisotropie materiálu”.
Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.
Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.
Artykuły w czasopismach na temat "Anisotropie materiálu":
KRAUS, L. "LOCAL MAGNETIC ANISOTROPY AND MAGNETOANELASTIC EFFECT IN AMORPHOUS AND NANOCRYSTALLINE ALLOYS". International Journal of Modern Physics B 07, nr 01n03 (styczeń 1993): 916–21. http://dx.doi.org/10.1142/s0217979293001979.
Yu, Jing, Yongmei Zhang, Yuhong Zhao i Yue Ma. "Anisotropies in Elasticity, Sound Velocity, and Minimum Thermal Conductivity of Low Borides VxBy Compounds". Metals 11, nr 4 (1.04.2021): 577. http://dx.doi.org/10.3390/met11040577.
Sharma, M. D. "Rayleigh wave at the surface of a general anisotropic poroelastic medium: derivation of real secular equation". Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 474, nr 2211 (marzec 2018): 20170589. http://dx.doi.org/10.1098/rspa.2017.0589.
Garemstani, Hamid, Dong Sheng Li i Moe A. Khaleel. "Microstructure Sensitive Design and Quantitative Prediction of Effective Conductivity in Fuel Cell Design". Materials Science Forum 561-565 (październik 2007): 315–18. http://dx.doi.org/10.4028/www.scientific.net/msf.561-565.315.
Tramsen, Halvor T., Stanislav N. Gorb, Hao Zhang, Poramate Manoonpong, Zhendong Dai i Lars Heepe. "Inversion of friction anisotropy in a bio-inspired asymmetrically structured surface". Journal of The Royal Society Interface 15, nr 138 (styczeń 2018): 20170629. http://dx.doi.org/10.1098/rsif.2017.0629.
Zhang, Qiankun, Rongjie Zhang, Jiancui Chen, Wanfu Shen, Chunhua An, Xiaodong Hu, Mingli Dong, Jing Liu i Lianqing Zhu. "Remarkable electronic and optical anisotropy of layered 1T’-WTe2 2D materials". Beilstein Journal of Nanotechnology 10 (20.08.2019): 1745–53. http://dx.doi.org/10.3762/bjnano.10.170.
Chanda, Arnab, i Christian Callaway. "Tissue Anisotropy Modeling Using Soft Composite Materials". Applied Bionics and Biomechanics 2018 (2018): 1–9. http://dx.doi.org/10.1155/2018/4838157.
Gurvich, Mark R. "On Characterization of Anisotropic Elastomeric Materials for Structural Analysis". Rubber Chemistry and Technology 77, nr 1 (1.03.2004): 115–30. http://dx.doi.org/10.5254/1.3547805.
Huang, Kai-xuan, Xiao-guang Gao, Bing-jie Hao, Xiu-xian Zhou, Zhan Li, Bao-wang Su, Xiao-kuan Li i in. "Anisotropic imaging for the highly efficient crystal orientation determination of two-dimensional materials". Journal of Materials Chemistry C 7, nr 20 (2019): 5945–53. http://dx.doi.org/10.1039/c9tc00900k.
Хлыбов, А. А., i А. Л. Углов. "Об использовании параметров структурного шума при контроле поверхностными акустическими волнами Рэлея стали 20ГЛ в процессе упругопластического деформирования". Дефектоскопия 7 (lipiec 2021): 3–10. http://dx.doi.org/10.31857/s0130308221070010.
Rozprawy doktorskie na temat "Anisotropie materiálu":
Valtrová, Martina. "Píst zážehového motoru vyráběný aditivní technologií". Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-449789.
Belijar, Guillaume. "Anisotropic composite elaboration and modeling : toward materials adapted to systems". Thesis, Toulouse 3, 2016. http://www.theses.fr/2016TOU30353/document.
This study was aimed to demonstrate the possibility, based on a predictive approach, to tailor the structure of a composite from isotropic to anisotropic when applying an electric field. This composites have great potential for future applications such as embed capacitors or thermally conductive composites. A theoretical approach of the forces and mechanisms acting in the elaboration of anisotropic composites by chaining allowed identifying the key parameters. Based on this approach a model of particle chaining under electric field was established to predict the structuration dynamics. This model (effective dipole moment) allowed simulating more than 4500 particles. The parameters previously identified were then measured, and for the particle permittivity, a dielectrophoretic measurement method was developed, which was a first for ceramic particles. The elaboration of anisotropic composites was coupled to a novel on-line monitoring of a chaining marker (permittivity), allowing to obtain the structuration dynamics. To validate the predictive aspect of the model, experimental and numerical dynamics were compared showing the robustness and accuracy of the model, even if improvement is still possible at low filler content. In the last part, a proof of concept was demonstrated of the elaboration of anisotropic composites with fillers oriented normally to the direction of the electric field
Rebouah, Marie. "Anisotropic stress softening and viscoelasticity in rubber like materials and architectured materials". Thesis, Grenoble, 2014. http://www.theses.fr/2014GRENI104.
This thesis work presents a study of the mechanical behavior of soft materials submitted to large deformations. In this context two types of materials were considered: rubber like materials and architectured materials to mimic soft tissues. As a first step, this study focuses on rubber like materials for a better understanding of the phenomena, especially through an large experimental study that could not be lead on soft tissues.The mechanical characterization of the rubber like materials allows highlighting several phenomena such as: the stress softening (also known as Mullins effect), induced anisotropy, permanent set and viscoelasticity. With the aim to create a model able to take into account all these effect in the framework of large deformations, several rubber like materials were used to highlight each one of these phenomena. In this way, each material permits to isolate one phenomenon to develop and validate a new part of the model.Thereafter, architectured materials made of rubber like materials were used to induce an initial anisotropy. The model proposed previously is adapted to take into account this initial anisotropy. An extension to modeling soft tissues (most of them are initially anisotropic) becomes possible.Each model was numerically implemented in a finite element code (except for the viscoelasticity), and the robustness of the model was validated by means of complex experimental tests (bulge test) or on complex structures (holey plate)
Geslain, Alan. "Anisotropie naturelle et induite des matériaux poreux : étude expérimentale et modélisation". Phd thesis, Université du Maine, 2011. http://tel.archives-ouvertes.fr/tel-00718301.
Yamashita, Tatsuya. "Analysis of anisotropic material". Ohio : Ohio University, 1996. http://www.ohiolink.edu/etd/view.cgi?ohiou1177700236.
Taouk, Habib. "Wave propagation in general anisotropic media". Ohio : Ohio University, 1986. http://www.ohiolink.edu/etd/view.cgi?ohiou1183380228.
Morris, Billy Ray. "Grain size estimation in anisotropic materials". Thesis, Georgia Institute of Technology, 1996. http://hdl.handle.net/1853/20042.
Lakku, Pavan Misra Anil. "Anisotropic granular models for cohesive materials". Diss., UMK access, 2005.
"A thesis in civil engineering." Typescript. Advisor: Anil Misra. Vita. Title from "catalog record" of the print edition Description based on contents viewed March 12, 2007. Includes bibliographical references (leaves 75-77). Online version of the print edition.
Bradford, Ian David Richard. "Finite deformations of highly anisotropic materials". Thesis, University of Nottingham, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.334952.
O'Neill, J. M. "Thermoelastic stress analysis of anisotropic materials". Thesis, University of Nottingham, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.376642.
Książki na temat "Anisotropie materiálu":
Groupe français de rhéologie. Colloque national. Rhéologie des matériaux anisotropes =: Rheology of anisotropic materials. Toulouse: Cepadues-Éditions, 1986.
Glaser, Rainer, i Piotr Kaszynski, red. Anisotropic Organic Materials. Washington, DC: American Chemical Society, 2001. http://dx.doi.org/10.1021/bk-2001-0798.
Skrzypek, Jacek J., i Artur W. Ganczarski, red. Mechanics of Anisotropic Materials. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-17160-9.
Ting, T. C. t. Anisotropic elasticity. New York: Oxford University Press, 1996.
Cowin, Stephen C. Continuum Mechanics of Anisotropic Materials. New York, NY: Springer New York, 2013.
Skrzypek, Jacek J., i Artur W. Ganczarski, red. Anisotropic Behaviour of Damaged Materials. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-540-36418-4.
Cowin, Stephen C. Continuum Mechanics of Anisotropic Materials. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-5025-2.
Hwu, Chyanbin. Anisotropic elastic plates. New York: Springer, 2010.
Golfman, Yosif. Hybrid anisotropic materials for wind power turbine blades. Boca Raton, Fla: CRC Press, 2012.
Golfman, Yosif. Hybrid anisotropic materials for structural aviation parts. Boca Raton: CRC Press, 2011.
Części książek na temat "Anisotropie materiálu":
Ieşan, Dorin. "Anisotropic materials". W Saint-Venant's Problem, 44–67. Berlin, Heidelberg: Springer Berlin Heidelberg, 1987. http://dx.doi.org/10.1007/bfb0078754.
Bert, Charles W. "Anisotropie-Material Behavior". W Manual on Experimental Methods for Mechanical Testing of Composites, 5–10. Dordrecht: Springer Netherlands, 1989. http://dx.doi.org/10.1007/978-94-009-1129-1_2.
Altenbach, Holm, Johannes Altenbach i Wolfgang Kissing. "Linear Anisotropic Materials". W Mechanics of Composite Structural Elements, 15–76. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-662-08589-9_2.
Altenbach, Holm, Johannes Altenbach i Wolfgang Kissing. "Linear Anisotropic Materials". W Mechanics of Composite Structural Elements, 19–84. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-8935-0_2.
Ganczarski, Artur. "Anisotropic Material Behavior". W Advanced Structured Materials, 125–50. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-30355-6_6.
Hwu, Chyanbin. "Piezoelectric Materials". W Anisotropic Elastic Plates, 369–410. Boston, MA: Springer US, 2010. http://dx.doi.org/10.1007/978-1-4419-5915-7_11.
Volokh, Konstantin. "Anisotropic Elasticity". W Mechanics of Soft Materials, 77–90. Singapore: Springer Singapore, 2016. http://dx.doi.org/10.1007/978-981-10-1599-1_5.
Volokh, Konstantin. "Anisotropic Elasticity". W Mechanics of Soft Materials, 79–93. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-8371-7_5.
Hwu, Chyanbin. "Viscoelastic Materials". W Anisotropic Elasticity with Matlab, 289–302. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-66676-7_12.
Bendsøe, Martin P., i Ole Sigmund. "Design with anisotropic materials". W Topology Optimization, 159–220. Berlin, Heidelberg: Springer Berlin Heidelberg, 2004. http://dx.doi.org/10.1007/978-3-662-05086-6_3.
Streszczenia konferencji na temat "Anisotropie materiálu":
Hilgert, Oliver, Susanne Höhler i Holger Brauer. "Anisotropic HFI Welded Steel Pipes for Strain Based Design". W 2016 11th International Pipeline Conference. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/ipc2016-64194.
Gaith, Mohamed S., i I. Alhayek. "The Measurement of Overall Elastic Stiffness and Bulk Modulus in Anisotropic Materials: Semiconductors". W ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-10097.
Smith, Hollis, i Julian Norato. "A Topology Optimization Method for the Design of Orthotropic Plate Structures". W ASME 2020 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/detc2020-22400.
Watanabe, Osamu. "Statistical Evaluation of Local Stress by Three-Dimensional Polycrystalline Material at Elevated Temperature". W ASME 2009 Pressure Vessels and Piping Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/pvp2009-77575.
Gaith, Mohamed S., i Imad Alhayek. "On the Measurement of the Overall Elastic Stiffness and Bulk Modulus in Anisotropic Materials: Semiconductors". W ASME 2009 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/detc2009-86559.
Gaith, Mohamed, i Imad Alhayek. "The Calculation of Stiffness for Semiconductor Components". W ASME 2009 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. ASMEDC, 2009. http://dx.doi.org/10.1115/smasis2009-1210.
Cameron, Jay. "Anisotropic Materials Use in the ASME Boiler and Pressure Vessel Code". W ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/pvp2018-84823.
Feng, Yuan, Ruth J. Okamoto, Ravi Namani, Guy M. Genin i Philip V. Bayly. "Identification of a Transversely Isotropic Material Model for White Matter in the Brain". W ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-88610.
Koscso, Adam, Guido Dhondt i E. P. Petrov. "High-Fidelity Sensitivity Analysis of Modal Properties of Mistuned Bladed Disks Regarding Material Anisotropy". W ASME Turbo Expo 2018: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/gt2018-76572.
Pan, E. "Force Dipoles in Anisotropic Materials: Cell Orientation Guided by Substrate Anisotropy?" W ASME 2004 International Mechanical Engineering Congress and Exposition. ASMEDC, 2004. http://dx.doi.org/10.1115/imece2004-59138.
Raporty organizacyjne na temat "Anisotropie materiálu":
Evans, Jordan Andrew. Nuclear Reactor Materials and Anisotropy. Office of Scientific and Technical Information (OSTI), grudzień 2019. http://dx.doi.org/10.2172/1578013.
Adamson, Douglas H., i Andrew J. Oyer. Development of an Anisotropic Thermal Transport Material. Fort Belvoir, VA: Defense Technical Information Center, styczeń 2014. http://dx.doi.org/10.21236/ada594404.
Johnson, G. C. Nondestructive evaluation of residual stress in anisotropic materials. Office of Scientific and Technical Information (OSTI), maj 1990. http://dx.doi.org/10.2172/6452606.
Mehrabadi, M. M., S. C. Cowin i C. O. Horgan. Strain Energy Density Bounds for Linear Anisotropic Elastic Materials. Fort Belvoir, VA: Defense Technical Information Center, styczeń 1993. http://dx.doi.org/10.21236/ada271050.
Ting, T. C. The Stroh Formalism for Anisotropic Elasticity with Applications to Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, październik 1994. http://dx.doi.org/10.21236/ada290710.
Ting, T. C. The Stroh Formalism for Anisotropic Elasticity with Applications to Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, październik 1991. http://dx.doi.org/10.21236/ada244271.
Skalicky, Peter, Josef Fidler, Roland Groessinger i Hans Kirchmayr. Anisotropy and Microstructure of Rare Earth Permanent Magnet Materials. Fort Belvoir, VA: Defense Technical Information Center, styczeń 1986. http://dx.doi.org/10.21236/ada170788.
Kalidindi, Surya R., i Ulrike G. Wegst. Use of Spherical Nanoindentation to Characterize the Anisotropic Properties of Microscale Constituents and Interfaces in Hierarchically Structured Composite Materials. Fort Belvoir, VA: Defense Technical Information Center, styczeń 2015. http://dx.doi.org/10.21236/ad1006778.