Zaloguj się

Gotowe bibliografie tematyczne / Atmospheric corrosivity / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Atmospheric corrosivity.

Artykuły w czasopismach na temat „Atmospheric corrosivity”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 20 lutego 2023

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Atmospheric corrosivity”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Kreislova, K., and M. Vlachova. "Monitoring of the atmospheric corrosivity by resistive sensors." Koroze a ochrana materialu 65, no. 3 (November 1, 2021): 86–91. http://dx.doi.org/10.2478/kom-2021-0011.

Pełny tekst źródła

Streszczenie:

Abstract Atmospheric corrosivity is classified according to EN ISO 9223 Corrosion of metals and alloys – Corrosivity of atmospheres – Classification, determination and estimation. For the determination and estimation of the corrosivity category, standardized approaches are used. Monitoring of corrosivity with the application of various sensors is an actual trend. The paper gives results of verification of some types of sensors for this monitoring with standardized flat samples at atmospheric test sites in the Czech Republic. The trend of decreasing atmospheric corrosivity is evident in the las

Style APA, Harvard, Vancouver, ISO itp.

2

Surnam, B. Y. R., and C. V. Oleti. "Determining the Corrosivity of Atmospheres, through the Weight Loss Method, According to ISO 9223." Advanced Materials Research 433-440 (January 2012): 975–82. http://dx.doi.org/10.4028/www.scientific.net/amr.433-440.975.

Pełny tekst źródła

Streszczenie:

ISO 9223 can be used to categorize the corrosivity of atmospheres through either corrosion loss measurements or the use of environmental data. Although both methods are expected to give the same result, discrepancies have been found to occur. The present paper analyses this aspect of ISO 9223, focusing on the effects of metal composition, when using carbon steel, in corrosivity categorisation. Low and medium carbon steel were, therefore, exposed outdoors at one site in Mauritius to determine its atmospheric corrosivity. It was found that for medium carbon steel, the corrosivity obtained from c

Style APA, Harvard, Vancouver, ISO itp.

3

Klassen,, R. D., and P. R. Roberge,. "PATTERNS OF ATMOSPHERIC CORROSIVITY." Corrosion Reviews 20, no. 1-2 (February 2002): 1–28. http://dx.doi.org/10.1515/corrrev.2002.20.1-2.1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Wesolowski, Mariusz, Aleksandra Rumak, Pawel Iwanowski, and Adam Poswiata. "Assessment of the Impact of Atmospheric Corrosivity on the Cement Concrete Airfield Pavement’s Operation Process." Sustainability 12, no. 22 (November 17, 2020): 9560. http://dx.doi.org/10.3390/su12229560.

Pełny tekst źródła

Streszczenie:

The aim of this research is to assess corrosion in natural atmospheric conditions, based on exposure of material samples and periodic monitoring, and to determine the size of corrosion losses, their form and appearance, as well as changes in physical properties at regular time intervals. Atmospheric corrosion tests were ultimately carried out in order to determine the corrosion resistance of a cement concrete airfield pavement, as well as to assess the type of corrosion and research data in order to determine and estimate the corrosivity of the atmosphere. Atmospheric corrosivity is one of the

Style APA, Harvard, Vancouver, ISO itp.

5

TAHARA, Akira. "Atmospheric Corrosivity using Steel Specimens." Journal of the Japan Society of Colour Material 84, no. 6 (2011): 205–11. http://dx.doi.org/10.4011/shikizai.84.205.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Roberge, P. R., R. D. Klassen, and P. W. Haberecht. "Atmospheric corrosivity modeling — a review." Materials & Design 23, no. 3 (May 2002): 321–30. http://dx.doi.org/10.1016/s0261-3069(01)00051-6.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Corvo, F., C. Haces, N. Betancourt, L. Maldonado, L. Véleva, M. Echeverria, O. T. De Rincón, and A. Rincon. "Atmospheric corrosivity in the Caribbean area." Corrosion Science 39, no. 5 (May 1997): 823–33. http://dx.doi.org/10.1016/s0010-938x(96)00138-2.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Kobus, Joanna, and Rafał Lutze. "Predicting of atmospheric corrosivity and durability of structural materials. Part I. Industrial, urban and rural area." Inżynieria Powierzchni 26, no. 1 (June 8, 2021): 34–45. http://dx.doi.org/10.5604/01.3001.0014.8776.

Pełny tekst źródła

Streszczenie:

The possibilities of monitoring atmospheric corrosivity in Poland in the years 1991–2019 to formulate empirical dependencies of corrosion losses of metals on selected environmental parameters and to build a program for spatial distribution of environmental data and corrosion damage have been presented. Algorithms make it possible to predict atmospheric corrosivity categories for selected industrial, urban and extra-urban areas.

Style APA, Harvard, Vancouver, ISO itp.

9

Cao, Xian Long, Yi De Xiao, Hong Da Deng, Peng Jun Cao, and Bi Jia. "Evaluation of Atmospheric Corrosivity by ACM Technique." Materials Science Forum 610-613 (January 2009): 3–8. http://dx.doi.org/10.4028/www.scientific.net/msf.610-613.3.

Pełny tekst źródła

Streszczenie:

The atmospheric corrosion has been shown to be an electrochemical process, the atmospheric corrosion behavior of Q235 stell evaluated with ACM (Atmospheric corrosion monitor) electrochemical technique was investigated in the study. The experimental results showed that there existed a close relation between electrochemical data and climatic parameters was confirmed. Taking into consideration accuracy and sensitivity of electrochemical technique, the ISO-standardized time of wetness (TOW) seems to be too conservative. SO2 seems to be more aggressive than chloride on metal corrosion in the early

Style APA, Harvard, Vancouver, ISO itp.

10

Santana, Juan J., Alejandro Ramos, Alejandro Rodriguez-Gonzalez, Helena C. Vasconcelos, Vicente Mena, Bibiana M. Fernández-Pérez, and Ricardo M. Souto. "Shortcomings of International Standard ISO 9223 for the Classification, Determination, and Estimation of Atmosphere Corrosivities in Subtropical Archipelagic Conditions—The Case of the Canary Islands (Spain)." Metals 9, no. 10 (October 15, 2019): 1105. http://dx.doi.org/10.3390/met9101105.

Pełny tekst źródła

Streszczenie:

The classification, assessment, and estimation of the atmospheric corrosivity are fixed by the ISO 9223 standard. Its recent second edition introduced a new corrosivity category for extreme environments CX, and defined mathematical models that contain dose–response functions for normative corrosivity estimations. It is shown here that application of the ISO 9223 standard to archipelagic subtropical areas exhibits major shortcomings. Firstly, the corrosion rates of zinc and copper exceed the range employed to define the CX category. Secondly, normative corrosivity estimation would require the m

Style APA, Harvard, Vancouver, ISO itp.

11

Natesan,, M., and N. Palaniswamy,. "ATMOSPHERIC CORROSIVITY AND DURABILITY MAPS OF INDIA." Corrosion Reviews 27, Supplement (December 2009): 61–112. http://dx.doi.org/10.1515/corrrev.2009.27.s1.61.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Panchenko, Yu M., A. I. Marshakov, L. A. Nikolaeva, and T. N. Igonin. "Estimating the First-year Corrosion Losses of Structural Metals for Continental Regions of the World." Civil Engineering Journal 6, no. 8 (August 1, 2020): 1503–19. http://dx.doi.org/10.28991/cej-2020-03091563.

Pełny tekst źródła

Streszczenie:

The knowledge of the first-year corrosion losses of metals (K1) in various regions of the world is of great importance in engineering applications. The K1 values are used to determine the categories of atmospheric corrosivity, and K1 is also the main parameter in models for the prediction of long-term corrosion losses of metals. In the absence of experimental values of K1, their values can be predicted on the basis of meteorological and aerochemical parameters of the atmosphere using the dose-response functions (DRF). Currently, the DRFs presented in ISO 9223:2012(E) /1/ standard are used for

Style APA, Harvard, Vancouver, ISO itp.

13

Evans, W., J. T. Mathis, and J. N. Cross. "Calcium carbonate corrosivity in an Alaskan inland sea." Biogeosciences 11, no. 2 (January 28, 2014): 365–79. http://dx.doi.org/10.5194/bg-11-365-2014.

Pełny tekst źródła

Streszczenie:

Abstract. Ocean acidification is the hydrogen ion increase caused by the oceanic uptake of anthropogenic CO2, and is a focal point in marine biogeochemistry, in part, because this chemical reaction reduces calcium carbonate (CaCO3) saturation states (Ω) to levels that are corrosive (i.e., Ω ≤ 1) to shell-forming marine organisms. However, other processes can drive CaCO3 corrosivity; specifically, the addition of tidewater glacial melt. Carbonate system data collected in May and September from 2009 through 2012 in Prince William Sound (PWS), a semienclosed inland sea located on the south-centra

Style APA, Harvard, Vancouver, ISO itp.

14

Evans, W., J. T. Mathis, and J. N. Cross. "Calcium carbonate corrosivity in an Alaskan inland sea." Biogeosciences Discussions 10, no. 9 (September 10, 2013): 14887–922. http://dx.doi.org/10.5194/bgd-10-14887-2013.

Pełny tekst źródła

Streszczenie:

Abstract. Ocean acidification is the hydrogen ion increase caused by the oceanic uptake of anthropogenic CO2, and is a focal point in marine biogeochemistry, in part, because this chemical reaction reduces calcium carbonate (CaCO3) saturation states (Ω) to levels that are corrosive (i.e. Ω ≤ 1) to shell-forming marine organisms. However, other processes can drive CaCO3 corrosivity; specifically, the addition of tidewater glacial melt. Carbonate system data collected in May and September from 2009 through 2012 in Prince William Sound (PWS), a semi-enclosed inland sea located on the south-centra

Style APA, Harvard, Vancouver, ISO itp.

15

VELEVA, L., and L. MALDONADO. "Classification of atmospheric corrosivity in humid tropical climates." British Corrosion Journal 33, no. 1 (January 1998): 53–58. http://dx.doi.org/10.1179/bcj.1998.33.1.53.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

16

Santana, J. J., J. Santana, J. E. González, D. de la Fuente, B. Chico, and M. Morcillo. "Atmospheric corrosivity map for steel in Canary Isles." British Corrosion Journal 36, no. 4 (October 2001): 266–71. http://dx.doi.org/10.1179/000705901101501721.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Faifer, Marco, Sara Goidanich, Christian Laurano, Chiara Petiti, Sergio Toscani, and Michele Zanoni. "Laboratory measurement system for pre-corroded sensors devoted to metallic artwork monitoring." ACTA IMEKO 10, no. 1 (March 31, 2021): 209. http://dx.doi.org/10.21014/acta_imeko.v10i1.855.

Pełny tekst źródła

Streszczenie:

<p>The monitoring of environmental corrosivity around works of cultural heritage is a key task in the field of both active and preventive conservation. In the case of metallic artworks, this task can be performed by means of coupons or sensors realised with the same materials as the artworks to be conserved. In this work, a measurement system for the development and testing of sensors for atmospheric corrosivity monitoring is presented. The metrological features of the measurement system operated in conjunction with a developed sensor are analysed. The sensor allows for considering the d

Style APA, Harvard, Vancouver, ISO itp.

18

Huang, Juncong, Xiaobo Meng, Zhijun Zheng, and Yan Gao. "Optimization of the atmospheric corrosivity mapping of Guangdong Province." Materials and Corrosion 70, no. 1 (July 26, 2018): 91–101. http://dx.doi.org/10.1002/maco.201810306.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Rincon,, Alvaro, A. I. De Rincon,, Mariela Fernandez,, and Edgar Loaiza,. "Measurement of Pollution Atmospheres in a Tropical Region and its Atmospheric Corrosivity Maps." Corrosion Reviews 18, no. 6 (December 2000): 473–88. http://dx.doi.org/10.1515/corrrev.2000.18.6.473.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

Motoda, Shin-ichi, Yonosuke Suzuki, Tadashi Shinohara, Yoichi Kojima, Shigeo Tsujikawa, Wataru Oshikawa, Shosuke Itomura, Toshiro Fukushima, and Shigeto Izumo. "ACM (Atmospheric Corrosion Monitor) Type Corrosion Sensor to Evaluate Corrosivity of Marine Atmosphere." Zairyo-to-Kankyo 43, no. 10 (1994): 550–56. http://dx.doi.org/10.3323/jcorr1991.43.550.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Wu, Mengchun, Renyuan Li, Yusuf Shi, Mustafa Altunkaya, Sara Aleid, Chenlin Zhang, Wenbin Wang, and Peng Wang. "Metal- and halide-free, solid-state polymeric water vapor sorbents for efficient water-sorption-driven cooling and atmospheric water harvesting." Materials Horizons 8, no. 5 (2021): 1518–27. http://dx.doi.org/10.1039/d0mh02051f.

Pełny tekst źródła

Streszczenie:

Metal- and halide-free, solid-state polymeric water vapor sorbents are developed with improved water sorption capacity, reduced corrosivity, and solid state, leading to efficient water-sorption-driven cooling and atmospheric water harvesting.

Style APA, Harvard, Vancouver, ISO itp.

22

KATAYAMA, Hideki, Shinjiro YAGYU, and Shigeyuki MATSUNAMI. "Prediction of Atmospheric Corrosivity from Environmental Data by Machine Learning." Journal of The Surface Finishing Society of Japan 71, no. 2 (February 1, 2020): 193. http://dx.doi.org/10.4139/sfj.71.193.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Fujii, Kazumi, and Kenya Ohashi. "Atmospheric Corrosivity Estimation by Multi-channel Quartz Crystal Microbalance Method." Zairyo-to-Kankyo 62, no. 5 (2013): 176–81. http://dx.doi.org/10.3323/jcorr.62.176.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

To, Dara, Tadashi Shinohara, and Osamu Umezawa. "Experimental Investigation on the Corrosivity of Atmosphere through the Atmospheric Corrosion Monitoring (ACM) Sensors." ECS Transactions 75, no. 29 (January 4, 2017): 1–10. http://dx.doi.org/10.1149/07529.0001ecst.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

Chatisathien, Polporn, and Nuttapon Suttitam. "Atmospheric Corrosion Behavior Assessment of Carbon Steel Pipes Using Cyclic Salt Spray Test." Key Engineering Materials 658 (July 2015): 42–52. http://dx.doi.org/10.4028/www.scientific.net/kem.658.42.

Pełny tekst źródła

Streszczenie:

Accelerated atmospheric corrosion behavior of carbon steel pipes subjected to cyclic salt spray test was performed according to ISO 14993 – Corrosion of metals and alloys – Accelerated testing involving cyclic exposure to salt mist, “dry” and “wet” conditions [1]. In order to investigate the effect of degree of exposure to environment of inner surface of the pipe on corrosion behavior of inner surface of the specimens, degree of completeness of weldment, 0%, 50%, 80%, and 100%, of steel cover plate is varied. Exposure times in this study are 168, 336, and 504 hours which can be correlated to 1

Style APA, Harvard, Vancouver, ISO itp.

26

Shinohara, Tadashi, Shin-ichi Motoda, and Wataru Oshikawa. "Evaluation of Corrosivity in Atmospheric Environment by ACM (Atmospheric Corrosion Monitor) Type Corrosion Sensor." Materials Science Forum 475-479 (January 2005): 61–64. http://dx.doi.org/10.4028/www.scientific.net/msf.475-479.61.

Pełny tekst źródła

Streszczenie:

An ACM (Atmospheric Corrosion Monitor) type corrosion sensor, consisting of a Fe-Ag galvanic couple was developed and applied for the evaluation of corrosivity of atmospheric environments. The sensor was designed considering mass-production and good reproducibility of results, making it convenient for long-term corrosion data acquisition. Besides the sensor output, I, temperature, relative humidity (RH) were also recorded by a microcomputer. By analyzing the magnitude and time variation of I, the occurrence and duration of rain, dew and dry periods, Train, Tdew and Tdry, respectively, could be

Style APA, Harvard, Vancouver, ISO itp.

27

Kobus, Joanna, and Rafał Lutze. "Predicting of atmospheric corrosivity and durability of structural materials. Part II. Impact of urban traffic pollution." Inżynieria Powierzchni 26, no. 2 (September 26, 2021): 25–33. http://dx.doi.org/10.5604/01.3001.0015.2277.

Pełny tekst źródła

Streszczenie:

The results of the atmospheric corrosivity assessment in the immediate vicinity of streets of different traffic volume in Warsaw, Krakow and Katowice are derived . On the bases of annual exposures in 2014–2018 years an equation describing the impact of environmental parameters and street traffic volume on corrosion losses of zinc and zinc coating on steel was selected.

Style APA, Harvard, Vancouver, ISO itp.

28

Rosas Perez, M. A., E. Gallardo Castan, G. Lugo Islas, A. Galicia Badillo, J. L. Ramirez Reyes, N. Garcia Navarro, J. Perez Tellez, and J. S. Oseguera Lopez. "Evaluation of Atmospheric Corrosivity Indexes in the City of Tuxpan Veracruz." ECS Transactions 64, no. 26 (April 30, 2015): 135–40. http://dx.doi.org/10.1149/06426.0135ecst.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

29

Klassen, R. D., and P. R. Roberge. "Aerosol transport modeling as an aid to understanding atmospheric corrosivity patterns." Materials & Design 20, no. 4 (August 1999): 159–68. http://dx.doi.org/10.1016/s0261-3069(99)00025-4.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

Kreislova, Katerina, Lubomir Mindos, Hana Geiplova, and Marketa Parakova. "Prediction of Materials and Coating Durability Based on Atmospheric and Laboratoty Tests." Materials Science Forum 844 (March 2016): 75–78. http://dx.doi.org/10.4028/www.scientific.net/msf.844.75.

Pełny tekst źródła

Streszczenie:

All industries are interesting in the durability/service life of products, structures, equipment, plants, etc. One factor affecting this is corrosion resistance. There are many methods for received such data. Methods supporting standardized data are long-term atmospheric corrosion tests, mapping of corrosivity, field tests on real structures including the evaluation of long-term exposed materials and coatings. The choice of suitable accelerated test is very important for receiving the reasonable information.

Style APA, Harvard, Vancouver, ISO itp.

31

Kim, Jin-Hyung, and Jong-Kwon Lee. "Atmospheric corrosion rate and corrosivity categories of industrial metals in Asan area." Journal of the Korea Academia-Industrial cooperation Society 14, no. 10 (October 31, 2013): 4653–57. http://dx.doi.org/10.5762/kais.2013.14.10.4653.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

Gallardo Castan, E., G. Lugo Islas, J. L. Ramirez Reyes, N. Garcia Navarro, A. Galicia Badillo, J. Perez Tellez, and M. A. Rojas Hernandez. "Evaluation of Atmospheric Corrosivity Indexes in The City of Poza Rica Veracruz." ECS Transactions 47, no. 1 (September 24, 2013): 189–94. http://dx.doi.org/10.1149/04701.0189ecst.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

33

Toyoda, Etsuko, Masamitsu Watanabe, Mineharu Suzuki, Hiroshi Ando, Yasuhiro Higashi, Toru Tanaka, Morihiko Matsumoto, Toshihiro Ichino, and Yoshimori Miyata. "Efficient Sampling Method for Evaluating Atmospheric Corrosivity Using Sputter-Cleaned Metal Surface." Zairyo-to-Kankyo 54, no. 1 (2005): 31–34. http://dx.doi.org/10.3323/jcorr1991.54.31.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

34

Surnam, Baboo Y. R. "Three years outdoor exposure of low carbon steel in Mauritius." Anti-Corrosion Methods and Materials 62, no. 4 (June 1, 2015): 246–52. http://dx.doi.org/10.1108/acmm-12-2013-1328.

Pełny tekst źródła

Streszczenie:

Purpose – This paper aims to investigate the corrosion behaviour of carbon steel in the Mauritian atmosphere over a three-year period. Atmospheric corrosion is a serious problem in Mauritius. Design/methodology/approach – Carbon steel samples were exposed outdoors at various sites. Mass loss analysis was performed to determine the corrosion behaviour of the metal over the exposure period. Scanning electron microscopy and Raman tests were performed to investigate the formation of the corrosion products on the carbon steel surface. Findings – It was found that the corrosion loss at two of the si

Style APA, Harvard, Vancouver, ISO itp.

35

Shinohara, Tadashi, Akira Tahara, Yuji Hosoya, Shin-ichi Motoda, and Wataru Oshikawa. "W18I Evaluation of corrosivity in atmospheric environment by ACM (Atmospheric Corrosion Monitor) type corrosion sensor(International Workshop on "New Frontiers of Smart Materials and Structural Systems")." Proceedings of the Materials and processing conference 2006.14 (2006): 328–29. http://dx.doi.org/10.1299/jsmemp.2006.14.328.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

Ríos Rojas, John Fredy, Diego Escobar Ocampo, Edwin Arbey Hernández García, and Carlos Enrique Arroyave Posada. "Atmospheric corrosivity in Bogota as a very high-altitude metropolis questions international standards." DYNA 82, no. 190 (May 11, 2015): 128–37. http://dx.doi.org/10.15446/dyna.v82n190.46256.

Pełny tekst źródła

Streszczenie:

<p>This paper presents the first systematic atmospheric corrosion assessment in Bogota. Main facts about the study are related with special characteristics of the City, such as population (more than eight million inhabitants), and altitude (2600 m over the sea level). Relative humidity, temperature, and SO2 concentration were measured. Simultaneously, corrosion rate of AIS/SAE 1006 plain steel was measured along one year. Results show that atmospheric corrosion is between C<sub>2</sub> – C<sub>3</sub> levels, according to the ISO 9223 standard. Nevertheless, estim

Style APA, Harvard, Vancouver, ISO itp.

37

Panchenko, Yu M., and P. V. Strekalov. "Calculating Corrosion Parameters of Sheet and Wire (Helical) Samples when Classifying Atmospheric Corrosivity." Protection of Metals 39, no. 6 (November 2003): 582–86. http://dx.doi.org/10.1023/b:prom.0000007853.37672.20.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

38

Forslund, M., and C. Leygraf. "A Quartz Crystal Microbalance Probe Developed for Outdoor In Situ Atmospheric Corrosivity Monitoring." Journal of The Electrochemical Society 143, no. 3 (March 1, 1996): 839–44. http://dx.doi.org/10.1149/1.1836546.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

39

Košťúr, Roman, and Matilda Zemanová. "Identification of corrosion products on iron artefact from Bratislava castle." Acta Chimica Slovaca 14, no. 1 (January 1, 2021): 1–6. http://dx.doi.org/10.2478/acs-2021-0001.

Pełny tekst źródła

Streszczenie:

Abstract Corrosion layers of an iron artefact were characterized to study long-term exposition of iron in Slovakia. The iron artefact from Bratislava castle has been coated with a strong layer of corrosion products and masonry residues. Corrosion products were characterized by different methods including energy-dispersive X-ray spectroscopy (EDX), X-Ray diffraction (XRD), and µ-Raman Spectroscopy. Magnetite and goethite on the surface are confirmed typical corrosion products from long-term atmospheric exposure in environment with corrosivity category C-2 (low).

Style APA, Harvard, Vancouver, ISO itp.

40

Fujii, Kazumi, Kenya Ohashi, and Tadahiko Hashimoto. "An Attempt to Estimate the Atmospheric Corrosivity by Multi-Channel Quartz Crystal Microbalance Sensors." Zairyo-to-Kankyo 56, no. 10 (2007): 458–63. http://dx.doi.org/10.3323/jcorr.56.458.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

Forslund, M., J. Majoros, and C. Leygraf. "A Sensor System for High Resolution In Situ Atmospheric Corrosivity Monitoring in Field Environments." Journal of The Electrochemical Society 144, no. 8 (August 1, 1997): 2637–42. http://dx.doi.org/10.1149/1.1837876.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

Suleiman, Mabruk I., Mohammad A. Rakib, Hala Kelani, Mustafa Karakaya, Mohamed Al Musharfy, Abraham George, and Nilesh Chandak. "Thermal dissociation of sulfur species: Analyzing variations in corrosivity of different condensate feedstock." Oil & Gas Science and Technology – Revue d’IFP Energies nouvelles 74 (2019): 2. http://dx.doi.org/10.2516/ogst/2018075.

Pełny tekst źródła

Streszczenie:

Traditionally, total sulfur content of a crude or condensate feedstock introduced to atmospheric distillation units in a refinery has been used as a measure to predict the high temperature corrosivity of these feeds. Such predictions were also utilized to decide on selection of materials of construction for refinery facilities processing condensate, and many chronic problems, sometimes leading to failure of materials have been reported. In reality, in addition to the total sulfur content, it is important to conduct a profiling of the distribution of the various types of sulfur components in th

Style APA, Harvard, Vancouver, ISO itp.

43

López-Ortega, Ainara, Raquel Bayón, and José Luís Arana. "Evaluation of Protective Coatings for High-Corrosivity Category Atmospheres in Offshore Applications." Materials 12, no. 8 (April 23, 2019): 1325. http://dx.doi.org/10.3390/ma12081325.

Pełny tekst źródła

Streszczenie:

The interest in renewable energies obtained from the resources availed in the ocean has increased during the last few years. However, the harsh atmospheric conditions in marine environments is a major drawback in the design of offshore structures. The protective systems that are employed to preserve offshore steel structures are regulated by several standards (ISO 12944, NORSOK M-501), which classify the corrosivity category of offshore installations as C5-M and Im2. In this work, three coatings employed in offshore components protection have been evaluated according to these standards by perf

Style APA, Harvard, Vancouver, ISO itp.

44

Fujii, Kazumi, Kenya Ohashi, Tadahiko Hashimoto, and Nobuyoshi Hara. "Atmospheric Corrosivity Estimation at Electrical Control Unit Room by Multichannel Quartz Crystal Microbalance Corrosion Sensors." MATERIALS TRANSACTIONS 53, no. 2 (2012): 412–16. http://dx.doi.org/10.2320/matertrans.m2011238.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

Kreislová, K., H. Geiplová, I. Skořepová, J. Skořepa, and D. Majtás. "Nové mapy korozní agresivity Èeské republiky / Up-dated maps of atmospheric corrosivity for Czech Republic." Koroze a ochrana materialu 59, no. 3 (November 1, 2015): 81–86. http://dx.doi.org/10.1515/kom-2015-0019.

Pełny tekst źródła

Streszczenie:

Atmosférická koroze a klasifi kace agresivity atmosfér je dlouhodobým předmětem studia SVUOM. Ve spolupráci s CGS byly v roce 2001 vytvořeny mapy korozních rychlostí a korozních tříd pro uhlíkovou ocel, patinující ocel, zinek, měď, bronz a hliník. Tento článek uvádí aktuální přístup k modelování atmosférické koroze v České republice, který je založen na modifi kovaných funkcích zahrnujících klimatická data, znečištění ovzduší a nově i vliv rozmrazujících solí v okolí dálnic.

Style APA, Harvard, Vancouver, ISO itp.

46

Pipko, I. I., S. P. Pugach, N. I. Savelieva, V. A. Luchin, O. V. Dudarev, V. I. Sergienko, and I. P. Semiletov. "Carbonate characteristics of the Gulf of Anadyr waters." Доклады Академии наук 487, no. 3 (August 17, 2019): 328–32. http://dx.doi.org/10.31857/s0869-56524873328-332.

Pełny tekst źródła

Streszczenie:

The first field data describing the dynamics of the carbonate system, aragonite saturation state, and CO2 fluxes between the ocean and the atmosphere in the Gulf of Anadyr in the late autumn season are presented. It was established that during this period the gulf waters absorbed carbon dioxide from the atmosphere at a rate of -22,5 mmol m‑2 day‑1, which determined the “classical” mechanism of seawater acidification due to uptake of excess atmospheric CO2. In general, surface waters of the gulf were supersaturated with respect to aragonite. The exception was the highly dynamic region of Anadyr

Style APA, Harvard, Vancouver, ISO itp.

47

GOTS, Volodymyr, Oles LASTIVKA, Oleksandr TOMIN, and Vyacheslav MEHET. "THE ROLE OF SILICATE FILLERS ON THE FORMATION PROPERTIES OF POWDER COATINGS." Building constructions. Theory and Practice, no. 10 (June 27, 2022): 117–23. http://dx.doi.org/10.32347/2522-4182.10.2022.117-123.

Pełny tekst źródła

Streszczenie:

The current state of the Ukrainianeconomy causes to resolve a range of questions related to the improvement of production and increasein the ecological safety of products, including paintand-varnishes materials, in combination with ensuring high operational properties of coatings based onthem.The formation of high-quality paints and varnishes with a long service life without compromising the ecology of the environment when usingthem, is largely determined by the composition andphysical and mechanical properties of paints andvarnishes.The main disadvantage of using liquid paints andvarnishes tr

Style APA, Harvard, Vancouver, ISO itp.

48

Fujii, Kazumi, Kenya Ohashi, and Teruyuki Aono. "In-situ Monitoring Test on Corrosivity of Atmospheric Environment Where Electrical Control Unit Was Set Up." Zairyo-to-Kankyo 56, no. 5 (2007): 215–21. http://dx.doi.org/10.3323/jcorr.56.215.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

Muhammad, Zulfri, Ali Nurdin, Husaini, and Mulyati Sri. "Mapping Corrosivity Steel Construction at Atmospheric Conditions in Langsa Town Center and Palm Oil Mill Industry." Key Engineering Materials 892 (July 13, 2021): 25–35. http://dx.doi.org/10.4028/www.scientific.net/kem.892.25.

Pełny tekst źródła

Streszczenie:

Corrosion is one of the main causes of early failure of infrastructure both for public housing facilities and public facilities in downtown Langsa. This corrosion is caused by air pollution generated from motor vehicle and household industry exhaust fumes and exhaust smoke from the nearest palm oil mill industry from the city of Langsa. Related to air pollution, its sustainability should be a concern regarding environmental impacts that occur, one of which is atmospheric corrosion. This study aims to analyze the impact of the effects of pollution on infrastructure corrosion on construction ste

Style APA, Harvard, Vancouver, ISO itp.

50

Yan, Luchun, Yupeng Diao, and Kewei Gao. "Analysis of Environmental Factors Affecting the Atmospheric Corrosion Rate of Low-Alloy Steel Using Random Forest-Based Models." Materials 13, no. 15 (July 23, 2020): 3266. http://dx.doi.org/10.3390/ma13153266.

Pełny tekst źródła

Streszczenie:

As one of the factors (e.g., material properties, surface quality, etc.) influencing the corrosion processes, researchers have always been exploring the role of environmental factors to understand the mechanism of atmospheric corrosion. This study proposes a random forest algorithm-based modeling method that successfully maps both the steel’s chemical composition and environmental factors to the corrosion rate of low-alloy steel under the corresponding environmental conditions. Using the random forest models based on the corrosion data of three different atmospheric environments, the environme

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!