Gotowe bibliografie tematyczne / Automotive components

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Automotive components”

Autor: Grafiati
Data publikacji: 4 czerwca 2021
Data aktualizacji: 19 lutego 2022

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Automotive components”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Automotive components"

1

Wang, Jun Jun, Lu Wang, and Ming Chen. "Automotive Electronic Control Components Energy Consumption and Environmental Emissions Analysis in China Based on Economic Input-Output Life-Cycle Assessment Model." Advanced Materials Research 479-481 (February 2012): 2177–81. http://dx.doi.org/10.4028/www.scientific.net/amr.479-481.2177.

Pełny tekst źródła
Streszczenie:
With the rapid growth of vehicle population and electronic control components used in automotives in China, the energy consumption and environmental emissions of automotive electronic control components in 2007 are calculated by adopting the EIO-LCA model. The calculation results indicate that automotive electronic control components consume 20306000 tons of standard coal equivalent (SCE), which is a large consumption of energy, and make a lot of toxic environmental emissions. However, in China, after the automotives are scrapped, the automotive electronic components are either discarded carel
Style APA, Harvard, Vancouver, ISO itp.
2

Wen, Bing Quan, Xia Xie, and Bin Wang. "Review of Remanufacturing for Automotive Components." Applied Mechanics and Materials 182-183 (June 2012): 482–85. http://dx.doi.org/10.4028/www.scientific.net/amm.182-183.482.

Pełny tekst źródła
Streszczenie:
Based on the concept of the remanufacturing for automotive components, the significance of implementing the remanufacturing was analyzed in this paper. And then the advanced technologies of automotive remanufacturing were focused on with some examples, such as the electro-brush plating technology, high-speed arc spraying technology, hypersonic velocity plasma spraying technology, scratch fast fill technology, and so on. In the end the conclusion was educed that the automotive remanufacturing is significant to the sustainable development of the society economy and the environmental protection,
Style APA, Harvard, Vancouver, ISO itp.
3

Kumar, Nithin, and Ajay Gopalswamy. "Robots in Welding of Automotive Components." Indian Welding Journal 36, no. 4 (October 1, 2003): 38. http://dx.doi.org/10.22486/iwj.v36i4.178781.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Ahn, Young-Nam, and Cheol-Hee Kim. "Laser Welding of Automotive Transmission Components." Journal of the Korean Welding and Joining Society 29, no. 6 (December 31, 2011): 45–48. http://dx.doi.org/10.5781/kwjs.2011.29.6.665.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Feldmann, K., B. Müller, and T. Haselmann. "Automated Assembly of Lightweight Automotive Components." CIRP Annals 48, no. 1 (1999): 9–12. http://dx.doi.org/10.1016/s0007-8506(07)63120-5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Beretta, S. "Defect tolerant design of automotive components." International Journal of Fatigue 19, no. 4 (April 1997): 319–33. http://dx.doi.org/10.1016/s0142-1123(96)00079-5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Magurno, Antonio. "Vegetable fibres in automotive interior components." Die Angewandte Makromolekulare Chemie 272, no. 1 (December 1, 1999): 99–107. http://dx.doi.org/10.1002/(sici)1522-9505(19991201)272:1<99::aid-apmc99>3.0.co;2-c.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Ivasishin, O. M., D. G. Sawakin, V. S. Moxson, K. A. Bondareval, and F. H. (Sam) Froes. "Titanium Powder Metallurgy for Automotive Components." Materials Technology 17, no. 1 (January 2002): 20–25. http://dx.doi.org/10.1080/10667857.2002.11752959.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Fitri, Muhamad, S. Mahzan, and Fajar Anggara. "The Mechanical Properties Requirement for Polymer Composite Automotive Parts - A Review." International Journal of Advanced Technology in Mechanical, Mechatronics and Materials 1, no. 3 (January 1, 2021): 125–33. http://dx.doi.org/10.37869/ijatec.v1i3.38.

Pełny tekst źródła
Streszczenie:
Indonesia has a large variety of natural fibers in abundance. Some of natural fibers become organic waste if not used for something needed by humans. One of the potential uses of natural fiber composite materials is to be used in automotive components. But before natural fiber composites are used in automotive components, it is necessary to examine first what are the requirements for mechanical properties or other properties required by the automotive components. Especially the automotive components which have been made from Polymers, like dash board, Car interior walls, front and rear bumper
Style APA, Harvard, Vancouver, ISO itp.
10

George, John, Kishore Pydimarry, Jeremy Seidt, and Kelton Rieske. "Ductile Fracture Prediction of Automotive Suspension Components." SAE International Journal of Engines 10, no. 2 (March 28, 2017): 280–86. http://dx.doi.org/10.4271/2017-01-0318.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Automotive components"

1

Enefalk, Tommy. "Improvements to Thermal Management System for Automotive Components." Thesis, KTH, Energiteknik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-244321.

Pełny tekst źródła
Streszczenie:
Global warming imposes great challenges, and anthropogenic greenhouse gas emissions have to be reduced by active measures. The transportation sector is one of the key sectors where significant reductions are desired. Within a vehicle, the cooling/thermal management system is a subsystem intended for temperature control of automotive components. Reducing the power consumption for thermal management is one of several possible ways to reduce the environmental impact of the vehicle. This report considers an existing reference cooling system, with three separate circuits at different temperature le
Style APA, Harvard, Vancouver, ISO itp.
2

Pantalone, Matteo. "Simulation techniques for the aerodynamic study of automotive components." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2018.

Znajdź pełny tekst źródła
Streszczenie:
When it comes to vehicle aerodynamics, wheels have always a primary importance due to their high drag contribution, expecially if they cannot be shrouded. For a vehichle such as a F1 car, wheel total drag contribution reaches high percentage, such as 30-40%. This study has the purpose to investigate the aerodynamic behaviour of a non-deformable rotating flat sided wheel without hubs. The testcase is supposed to have dimensions of a 2018 F1 front tyre. A Computational Fluid Dynamics (CFD) approach, by using Open-FOAM (OF), is used to catch the main flow features, vortex structures and forces
Style APA, Harvard, Vancouver, ISO itp.
3

Low, Wai Leung 1977. "Cell and equipment design in the automotive components industry." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/89323.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Oropeza, Guillermo 1975. "Production system design and implementation in the automotive components industry." Thesis, Massachusetts Institute of Technology, 2001. http://hdl.handle.net/1721.1/89306.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Napier, Parhys L. "The individual contribution of automotive components to vehicle fuel consumption." Thesis, Massachusetts Institute of Technology, 2011. http://hdl.handle.net/1721.1/68851.

Pełny tekst źródła
Streszczenie:
Thesis (S.B.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2011.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 47-51).<br>Fuel consumption has grown to become a major point of interest as oil reserves are depleted. The purpose of this study is to determine the key components that cause variation in the instantaneous fuel consumption of vehicles and their level of impact using an in-depth literature review of technical papers. The literature is rigorously screened using an algorithm that excluded unreliable studies by criteria de
Style APA, Harvard, Vancouver, ISO itp.
6

Ramaswamy, Sangeetha [Verfasser]. "Manufacturing of Automotive Interior Components with Renewable Raw Materials / Sangeetha Ramaswamy." Aachen : Shaker, 2017. http://d-nb.info/1138178225/34.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Kersch, Kurthan Verfasser], and Elmar [Gutachter] [Woschke. "3D-vibration testing for automotive components / Kurthan Kersch ; Gutachter: Elmar Woschke." Magdeburg : Universitätsbibliothek Otto-von-Guericke-Universität, 2020. http://d-nb.info/122267078X/34.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Lamming, Richard. "Supplier strategies in the automotive components industry : development towards lean production." Thesis, University of Sussex, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.304680.

Pełny tekst źródła
Streszczenie:
This Thesis contributes to understanding of strategic collaborative partnerships between industrial customers and suppliers, within the context of technical change. Automotive manufacturers are facing a plethora of technical change - more than they can handle in traditional ways - and a new basis for competition, set by so-called "lean" manufacturers, from Japan. Lean Production, a demonstrably superior strategy for vehicle design and manufacture, contradicts many of the tenets of the previous best practice: mass production. In order to compete, vehicle assemblers are turning to their supplier
Style APA, Harvard, Vancouver, ISO itp.
9

Masha, Bukola L. (Bukola Lewis) 1979. "Production system design and implementation in the European automotive components industry." Thesis, Massachusetts Institute of Technology, 2002. http://hdl.handle.net/1721.1/89886.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Mangin, Christophe G. E. "Advanced engineering materials for automotive engine components : cost and performance estimations." Thesis, Massachusetts Institute of Technology, 1993. http://hdl.handle.net/1721.1/12742.

Pełny tekst źródła
Streszczenie:
Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 1993.<br>Includes bibliographical references (v. 2, leaves 369-375).<br>by Christophe G.E. Mangin.<br>Ph.D.
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Automotive components"

1

Wagstaff, Ian. World automotive components. London: The Economist Intelligence Unit, 1998.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Scholfield, V., and I. Henry. European automotive components. 2nd ed. London: Economist Intelligence Unit, 1999.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Gangwar, Vandana. The Indian automotive components industry. New Delhi: ICRA Limited, 1999.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Lake, Susan. The UK automotive components industry. London: Economist Intelligence Unit, 1991.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Birmingham), Autotech 1991 (1991. Advanced power metallurgy automotive components. [London]: Institution of Mechanical Engineers, 1991.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Testing automotive materials and components. Warrendale, PA, U.S.A: Society of Automotive Engineers, 1993.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Mullineux, Neil. Automotive components: Technological changes to 2010. London: Pearson Professional, 1995.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Ling, Frederick F. (Frederick Fongsun), 1927-, Morello Lorenzo, and SpringerLink (Online service), eds. The Automotive Chassis: Vol. 1: Components Design. Dordrecht: Springer Netherlands, 2009.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Langheim, Jochen, ed. Electronic Components and Systems for Automotive Applications. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-14156-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Beecham, Matthew. World automotive components: Market prospects to 2005. 2nd ed. London: Economist Intelligence Unit, 2000.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Automotive components"

1

Barton, David C., and John D. Fieldhouse. "Suspension Systems and Components." In Automotive Chassis Engineering, 111–214. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72437-9_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Beretta, Joseph, Jean Bonal, and Thierry Alleau. "The Components of Electric-Powered Vehicles." In Automotive Electricity, 173–267. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118557549.ch4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Hill, Malcolm R., and Richard McKay. "Automotive Products and Components." In Soviet Product Quality, 68–91. London: Palgrave Macmillan UK, 1988. http://dx.doi.org/10.1007/978-1-349-09290-1_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Landhäußer, Felix, Helmut Sattmann, Rainer Heinzmann, Mikel Lorente Suseata, Andreas Rettich, Werner Brühmann, Klaus Ortner, et al. "High-pressure components of common-rail systems." In Automotive Mechatronics, 430–53. Wiesbaden: Springer Fachmedien Wiesbaden, 2014. http://dx.doi.org/10.1007/978-3-658-03975-2_21.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Panda, Sudhanshu Bhushan, Antaryami Mishra, and Narayan Chandra Nayak. "Design for Manufacturing Automotive Components." In AI in Manufacturing and Green Technology, 31–44. First edition. | Boca Raton, FL : CRC Press, 2020. |: CRC Press, 2020. http://dx.doi.org/10.1201/9781003032465-4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Benoualid, D., and I. Wander. "Finite Element Analysis of Rubber Components in Hutchinson." In Automotive Simulation ’91, 57–65. Berlin, Heidelberg: Springer Berlin Heidelberg, 1991. http://dx.doi.org/10.1007/978-3-642-84586-4_6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Wong, Wilson Kia Onn. "Comparative analysis of the five components subsectors." In Automotive Global Value Chain, 263–75. Abingdon, Oxon ; New York, NY : Routledge, 2018. | Series: Routledge advances in management and business studies ; 71: Routledge, 2017. http://dx.doi.org/10.4324/9781315300993-8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Burger, U., and L. Rochat. "Aspects of Damage Tolerance and Fatigue of CFRP Structural Components." In Sustainable Automotive Technologies 2014, 149–62. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-17999-5_14.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Wootton, A. J., J. C. Hendry, A. K. Cruden, and J. D. A. Hughes. "Structural Automotive Components in Fibre Reinforced Plastics." In Composite Structures 3, 19–42. Dordrecht: Springer Netherlands, 1985. http://dx.doi.org/10.1007/978-94-009-4952-2_2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Chiru, Anghel, and Lucian Rad. "Constructive Optimization of Composite Materials Automotive Components." In CONAT 2016 International Congress of Automotive and Transport Engineering, 556–64. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-45447-4_61.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Automotive components"

1

Cucuras, Charles N., Arthur M. Flax, W. David Graham, and George N. Hartt. "Recycling of Thermoset Automotive Components." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1991. http://dx.doi.org/10.4271/910387.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Tao, Xiaojian, and Martin B. Treuhaft. "Contamination Sensitivity of Automotive Components." In SAE International Congress and Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1997. http://dx.doi.org/10.4271/970552.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Ogarevic, Vladimir, Bruce Whittle, Xiaobin Lin, and Robin Anderson. "Thermal Fatigue of Automotive Components." In SAE 2001 World Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2001. http://dx.doi.org/10.4271/2001-01-0829.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Suess, Steven J. "Failure Analysis of Automotive Components." In SAE 2004 World Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2004. http://dx.doi.org/10.4271/2004-01-0857.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Waggoner, John P. "FORMCAST Aluminum Components for Automotive Applications." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1995. http://dx.doi.org/10.4271/950570.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Mohiuddin, Gulam, Walter W. Duley, and M. Nasim Uddin. "Laser surface engineering of automotive components." In ICALEO® ‘95: Proceedings of the Laser Materials Processing Conference. Laser Institute of America, 1995. http://dx.doi.org/10.2351/1.5058914.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Brylinski, Thomas T. "Molding Advancements for Phenolic Automotive Components." In SAE 2000 World Congress. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-1164.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Morphy, Gary. "Hydroformed Automotive Components: Manufacturing Cost Considerations." In International Body Engineering Conference & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2000. http://dx.doi.org/10.4271/2000-01-2672.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Kaminski, Paulo Carlos, and Guido Muzio Candido. "Current automotive components optimization - case studies." In SAE Brasil 2005 Congress and Exhibit. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2005. http://dx.doi.org/10.4271/2005-01-4045.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Klezar, Siegfried, and Roland Spriessler. "Battery Supply Simulation of Automotive Components." In SIAT 2005. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2005. http://dx.doi.org/10.4271/2005-26-075.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Automotive components"

1

Bridges, B., J. Elmer, and L. Carol. Superplastic forming of stainless steel automotive components. Office of Scientific and Technical Information (OSTI), February 1997. http://dx.doi.org/10.2172/658226.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

McMurtry, C. H., and M. O. Ten Eyck. Evaluation of Sialon internal combustion engine components and fabrication of several ceramic components for automotive applications. Office of Scientific and Technical Information (OSTI), October 1992. http://dx.doi.org/10.2172/10104381.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

McMurtry, C. H., and M. O. Ten Eyck. Evaluation of Sialon internal combustion engine components and fabrication of several ceramic components for automotive applications. Office of Scientific and Technical Information (OSTI), October 1992. http://dx.doi.org/10.2172/6860143.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Fine, Charles H. Flexible Design and Manufacturing Systems for Automotive Components and Sheet Metal Parts. Fort Belvoir, VA: Defense Technical Information Center, October 1999. http://dx.doi.org/10.21236/ada375391.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Simunovic, S., G. A. Aramayo, T. Zacharia, T. G. Toridis, F. Bandak, and C. L. Ragland. Advanced computational simulation for design and manufacturing of lightweight material components for automotive applications. Office of Scientific and Technical Information (OSTI), April 1997. http://dx.doi.org/10.2172/631244.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Ludtka, Gerard Michael, Gail Mackiewicz Ludtka, John B. Wilgen, Roger A. Kisner, and Aquil Ahmad. Use of High Magnetic Fields to Improve Material Properties for Hydraulics, Automotive and Truck Components. Office of Scientific and Technical Information (OSTI), August 2010. http://dx.doi.org/10.2172/984782.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

James, M., and D. R. Lesuer. Development and Demonstration of Superplastic Roll Forming Technology for Automotive Components Final Report CRADA No. TC-1087-95-B. Office of Scientific and Technical Information (OSTI), February 2018. http://dx.doi.org/10.2172/1424655.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Lesuer, D. R., and H. S. Yang. Development and Demonstration of Superplastic Roll Forming Technology for Automotive Components Final Report CRADA No. TC-1087-95-A. Office of Scientific and Technical Information (OSTI), February 2018. http://dx.doi.org/10.2172/1424656.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Razdan, Rahul. Unsettled Issues Regarding Autonomous Vehicles and Open-source Software. SAE International, April 2021. http://dx.doi.org/10.4271/epr2021009.

Pełny tekst źródła
Streszczenie:
As automobiles morph from stand-alone mechanical objects to highly connected, autonomous systems with increasing amounts of electronic components. To manage these complex systems, some semblance of in-car decision-making is also being built and networked to a cloud architecture. This cloud can also enable even deeper capabilities within the broader automotive ecosystem. Unsettled Issues Regarding Autonomous Vehicles and Open-source Software introduces the impact of software in advanced automotive applications, the role of open-source communities in accelerating innovation, and the important to
Style APA, Harvard, Vancouver, ISO itp.
10

Richerson, D. W. The status of ceramic turbine component fabrication and quality assurance relevant to automotive turbine needs. Office of Scientific and Technical Information (OSTI), February 2000. http://dx.doi.org/10.2172/757308.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Automotive components” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii