Zaloguj się

Gotowe bibliografie tematyczne / Broad Casting / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Broad Casting.

Artykuły w czasopismach na temat „Broad Casting”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Broad Casting”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Xu, Yong Tao, Tian Yang Guan, Zhi Feng Zhang, Yue Long Bai, and Wei Min Mao. "Semi-Solid Rheological Squeeze Casting Process of ZL114A Aluminum Alloy Thin-Wall Complex Casting." Materials Science Forum 993 (May 2020): 248–53. http://dx.doi.org/10.4028/www.scientific.net/msf.993.248.

Pełny tekst źródła

Streszczenie:

High-strength aluminum alloy with large-scale and thin-walled complex castings have broad application prospects in aerospace, weapons, electronics, defense and military industries. However, due to the uneven thickness of the plate, the casting defects are inevitable by the ordinary casting method, and it is impossible to accurately control the shape and performance of the casting in the casting process. Previous studies have found that the semi-solid rheological extrusion casting technology with short process and near-end type can help solve this technical problem. Therefore, this paper studie

Style APA, Harvard, Vancouver, ISO itp.

2

Edlabadkar, A. P., S. S. Chaudhari, P. D. Kamble, C. Mankar, and D. N. Kashyap. "Empirical Exploration of Optimal Gating System Design for Sand Casting Process." AFRICAN JOURNAL OF APPLIED RESEARCH 11, no. 1 (2025): 871–91. https://doi.org/10.26437/ajar.v11i1.888.

Pełny tekst źródła

Streszczenie:

Purpose: This paper aims to analyse and optimise the gating system used in the sand casting process to produce drainage doors at Deepshikha Casting in Nagpur. It focuses on understanding how gate design impacts productivity and the quality of the cast, drawing attention to common defects and the role of gravity casting techniques. Design/Methodology/Approach: This paper discusses the present gating system of Deepshikha Casting in detail to identify defects, such as sand inclusions, blow holes, pinholes, gas holes, shrinkage, and misruns. The present gating ratio and system weight assessment ar

Style APA, Harvard, Vancouver, ISO itp.

3

Rogers, J. M. "Casting a Broad Network: Fishing for Mechanisms of Retinoid Teratogenicity." Toxicological Sciences 94, no. 1 (2006): 1–2. http://dx.doi.org/10.1093/toxsci/kfl104.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Drekonja, Dimitri M., Christina Gnadt, Michael A. Kuskowski, and James R. Johnson. "Urine Cultures among Hospitalized Veterans: Casting Too Broad a Net?" Infection Control & Hospital Epidemiology 35, no. 5 (2014): 574–76. http://dx.doi.org/10.1086/675829.

Pełny tekst źródła

Streszczenie:

Since detection of asymptomatic bacteriuria among inpatients often leads to inappropriate antimicrobial treatment, we studied why urine cultures were ordered and correlates of treatment. Most cultures were obtained from patients without urinary complaints and a minority from asymptomatic patients. High-count bacteriuria, not clinical manifestations, appeared to trigger most antimicrobial use.

Style APA, Harvard, Vancouver, ISO itp.

5

Pan, Hong, Guo Rong Wu, and Zhi Qiang Li. "Quality Control of Casting Slab for 510L Steel." Applied Mechanics and Materials 117-119 (October 2011): 756–59. http://dx.doi.org/10.4028/www.scientific.net/amm.117-119.756.

Pełny tekst źródła

Streszczenie:

Slab quality affects the quality of hot rolled sheet significantly. There were serious transverse corner cracks on continuous casting slab of 510L steel plate in Panzhihua Steel before. Based on this, some effective countermeasures are put forward, such as the optimization of ratio of heat flux on narrow side and broad side of casting slab and mold powder, as well as the stabilization of casting speed and working condition of caster. With these countermeasures, transverse corner cracks on continuous casting slab have been significantly reduced, and the lines and peeling defects on hot rolled s

Style APA, Harvard, Vancouver, ISO itp.

6

Pan, Hong, Guo Rong Wu, Yong Chen, Jian Hua Zeng, and Zhi Qiang Li. "Study on Control Technology of Transverse Corner Cracks on CC Slab for Automobile Frame Steel Plate." Advanced Materials Research 295-297 (July 2011): 636–40. http://dx.doi.org/10.4028/www.scientific.net/amr.295-297.636.

Pełny tekst źródła

Streszczenie:

There were serious transverse corner cracks on continuous casting slab of automobile frame steel plate in Panzhihua Steel before, and study on the control of transverse corner cracks had been carried out. Some effective countermeasures are put forward, such as the optimization of ratio of heat flux density on narrow side and broad side of casting slab (RHFD) and mold powder, as well as the stabilization of casting speed and working condition of caster. Industrial test shows that the transverse corner cracks on continuous casting slab have been significantly reduced, and the lines and peeling d

Style APA, Harvard, Vancouver, ISO itp.

7

Wang, Panpan, Xufeng Qin, Changgui Cheng, Jianjun Zhang, and Yang Li. "Effect of Process Parameters on Metallurgical Behavior of Liquid Steel in a Thickened Compact Strip Production Mold with Electromagnetic Braking." Processes 13, no. 5 (2025): 1427. https://doi.org/10.3390/pr13051427.

Pełny tekst źródła

Streszczenie:

Herein, a three-dimensional mathematical model was established to investigate the metallurgical behavior of liquid steel in a funnel-shaped mold equipped with single-ruler electromagnetic braking (EMBr). The effects of mold thicknesses, electromagnetic intensity, and casting speed in flow behavior were investigated. The results indicate that with EMBr, multiple pairs of induced current loops are present in the horizontal section of the magnetic pole center, distributed in pairs between the jets and broad faces. The Lorentz force acting on the main jet, which impacts the downward and upward flo

Style APA, Harvard, Vancouver, ISO itp.

8

Sasama, Toshihiko, Hiroshi Masuyama, and Kazuya Murakami. "Algorithms for Energy-Efficient Broad- and Multi-Casting in Wireless Networks." Journal of Information Processing 16 (2008): 64–67. http://dx.doi.org/10.2197/ipsjjip.16.64.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Baek, J. S., M. S. Choi, and S. Y. Hwang. "A Broad Class of Partially Specified Autoregressions on Multi-Casting Data." Communications in Statistics - Theory and Methods 41, no. 1 (2012): 178–93. http://dx.doi.org/10.1080/03610926.2010.521282.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Srinivasan, A., S. Swaminathan, and K. Ramasamy. "An Intelligent and Efficient Wireless Classroom Management System." Advanced Materials Research 984-985 (July 2014): 1364–69. http://dx.doi.org/10.4028/www.scientific.net/amr.984-985.1364.

Pełny tekst źródła

Streszczenie:

The aim of this paper is to propose works by analysing, the data sent from the admin through Wi-Fi and provides acknowledgement to the admin through the same system used for communication. The reason why Wi-Fi has been ,used for broad-casting the data is that today’s conventional educational institutions have Wi-Fi facility in their campus for providing internet connectivity to the students. Broad-casting is done by sending the data to all the access points by accessing the broadcast ID of the network in which this system is to be implemented. Hence the same Wi-Fi system can be used to broadca

Style APA, Harvard, Vancouver, ISO itp.

11

Su, Fei, Donghong Wang, Jing Xue, et al. "Data-driven optimization of material composition and casting processes for large ferritic nodular cast iron components in wind turbines." Journal of Physics: Conference Series 2921, no. 1 (2024): 012002. https://doi.org/10.1088/1742-6596/2921/1/012002.

Pełny tekst źródła

Streszczenie:

Abstract This study addresses the challenges of producing large-scale wind turbine components by proposing an optimization scheme for the material properties and casting processes of ductile cast iron. The study integrates experimental data with JMatPro calculations to establish a comprehensive database of 1, 139 ferritic nodular cast iron samples. Using machine learning and multi-objective optimization, an optimized composition was developed, and Pareto front solutions were achieved with performance significantly surpassing QT400-18. The AI-CAST platform was then applied to refine the casting

Style APA, Harvard, Vancouver, ISO itp.

12

Vdovin, K. N., A. E. Pozin, I. E. Petrov, A. A. Podosyan, and V. V. Tochilkin. "Ingot contact with the broad mold walls in continuous slab-casting machines." Steel in Translation 43, no. 7 (2013): 452–54. http://dx.doi.org/10.3103/s0967091213070152.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Joseph, Dana L., and Gregory J. Rousis. "Casting a Wider Net: Recommendations for the Study of Broad Discrimination Experiences." Industrial and Organizational Psychology 6, no. 1 (2013): 88–92. http://dx.doi.org/10.1111/iops.12014.

Pełny tekst źródła

Streszczenie:

In the end, antiblack, antifemale, and all forms of discrimination are equivalent to the same thing—antihumanism.–Shirley Chisholm (The first African American woman elected to Congress)Ruggs et al. (2013) have provided an indispensable wake-up call to the organizational sciences as they argue that the field's previous research on employee discrimination experiences has failed to capture the full spectrum of discriminatory behaviors in the workplace. They posit that industrial and organizational psychologists have “gone fishing” in the field of discrimination research, a reference to our schola

Style APA, Harvard, Vancouver, ISO itp.

14

Pysz, S., E. Czekaj, R. Żuczek, M. Maj, and J. Piekło. "Low Cycle Mechanical and Fatigue Properties of AlZnMgCu Alloy." Archives of Foundry Engineering 16, no. 1 (2016): 55–60. http://dx.doi.org/10.1515/afe-2016-0003.

Pełny tekst źródła

Streszczenie:

Abstract The article presents the analysis of properties of the high-strength AlZnMgCu (abbr AlZn) aluminium alloy and estimates possibilities of its application for responsible structures with reduced weight as an alternative to iron alloy castings. The aim of the conducted studies was to develop and select the best heat treatment regime for a 7xx casting alloy based on high-strength materials for plastic working from the 7xxx series. For analysis, wrought AlZnMgCu alloy (7075) was selected. Its potential of the estimated as-cast mechanical properties indicates a broad spectrum of possible ap

Style APA, Harvard, Vancouver, ISO itp.

15

Awoke, Tadesse, Yoseph Tekle, and Mitiku Misgana. "EFFECT OF SOWING METHODS AND SEED RATE ON YIELD OF BREAD WHEAT (TRITICUM AESTIVUM L.) AT SOUTH ARI DISTRICT, SOUTH OMO ZONE, SNNPR, ETHIOPIA." International Journal of Research - Granthaalayah 5, no. 6 (2017): 175–80. https://doi.org/10.5281/zenodo.818814.

Pełny tekst źródła

Streszczenie:

Wheat is one of the most important cereal crops of the world and is a staple food for about one third of the world’s population. Despite the significant area of wheat production in the country, the mean national yield 1.3 t ha<sup>-1</sup> is 24% below than mean yield for Africa and 48% below than global mean yield. A field experiment was carried out at Senegal and Selmamer during 2014 cropping season to determine the effects of sowing methods and seed rate on yield of bread wheat (Triticum aestivum L.). Treatments were two sowing methods namely row planting and broadcasting with six Seed rate

Style APA, Harvard, Vancouver, ISO itp.

16

Virzi, Robert A., and John S. Huitema. "Telephone-Based Menus: Evidence that Broader is Better than Deeper." Proceedings of the Human Factors and Ergonomics Society Annual Meeting 41, no. 1 (1997): 315–19. http://dx.doi.org/10.1177/107118139704100171.

Pełny tekst źródła

Streszczenie:

Recent guidelines intended for designers of telephone menus for Interactive Voice Response (IVR) systems advocate keeping menus to four or fewer items. Additional items, the guidelines recommend, should appear on a secondary menu accessible from the first. The current study compared this deep-menu approach to a broad-menu approach wherein all the items appear on a single menu. Item selection times favored the broad-menu approach for both repeated and unique trials, casting some doubt on the validity of this particular guideline.

Style APA, Harvard, Vancouver, ISO itp.

17

Zhang, Tie Zhi, Cheng Yong Wang, and Jin Wu. "Application Approach and Prospects of the Foundry Waste Sand and Slag in Engineering." Applied Mechanics and Materials 716-717 (December 2014): 493–96. http://dx.doi.org/10.4028/www.scientific.net/amm.716-717.493.

Pełny tekst źródła

Streszczenie:

In the foundry industry, the main solid waste is the foundry waste sand, casting cupola dust and slag, which causes environmental pollution and becomes a bottleneck restricting the development of the foundry industry. The main components of the foundry waste sand and slag generated by casting are siliceous and calcareous granular materials, which meet the needs of engineering construction materials, they have a broad application prospect. In this paper, the investigation and analysis of the foundry waste sand and slag have been carried on about the research and application in the engineering c

Style APA, Harvard, Vancouver, ISO itp.

18

Kroupová, I., F. Radkovský, P. Lichý, and V. Bednářová. "Manufacturing of Cast Metal Foams with Irregular Cell Structure." Archives of Foundry Engineering 15, no. 2 (2015): 55–58. http://dx.doi.org/10.1515/afe-2015-0038.

Pełny tekst źródła

Streszczenie:

Abstract Metallic foams are materials of which the research is still on-going, with the broad applicability in many different areas (e.g. automotive industry, building industry, medicine, etc.). These metallic materials have specific properties, such as large rigidity at low density, high thermal conductivity, capability to absorb energy, etc. The work is focused on the preparation of these materials using conventional casting technology (infiltration method), which ensures rapid and economically feasible method for production of shaped components. In the experimental part we studied condition

Style APA, Harvard, Vancouver, ISO itp.

19

Yi, Feng, and Xue Feng Liu. "Numerical Simulation of Temperature Field and Microstructure of a Wide Copper Plate during Warm Mold Continuous Casting." Materials Science Forum 898 (June 2017): 1289–99. http://dx.doi.org/10.4028/www.scientific.net/msf.898.1289.

Pełny tekst źródła

Streszczenie:

Wide plates are mainly prepared through traditional cold mold continuous casting technology. A problem is cracking which caused by the non-uniform temperature field in solidification. Warm mold continuous casting is a new technology. Warm mold continuous casting of wide copper plate (section 500mm×12mm) was studies. Temperature field, solid/liquid interface and microstructure were analyzed by ProCAST software. By simulation, the optimal processing parameters: withdrawing speed was 60-80 mm/min, and the temperature of copper melt, mold and cooling water were 1200°C, 800-900oC and 20 oC, respect

Style APA, Harvard, Vancouver, ISO itp.

20

Xu, Wan Qiang, Lalu Robin, Kevin J. Laws, Rong Kun Zheng, and Michael Ferry. "The Redistribution and Alignment of Crystalline Flakes in a Bulk Metallic Glass Composite during Thermoplastic Forming." Materials Science Forum 702-703 (December 2011): 971–74. http://dx.doi.org/10.4028/www.scientific.net/msf.702-703.971.

Pełny tekst źródła

Streszczenie:

An In-situ Mg-based bulk metallic glass (BMG) composite containing 40% volume fraction of Mg-rich crystalline flakes was produced by die casting. During cooling from the melt, the flakes nucleate heterogeneously and subsequently grow with their broad faces parallel to the {0001} plane. This generated a uniform dispersion of randomly-oriented flakes within an amorphous matrix. When compressed uniaxially up to 60% reduction in the supercooled liquid (SCL) region, the flakes in this composite were substantially aligned their broad faces towards the compression plane that generated a strong //ND f

Style APA, Harvard, Vancouver, ISO itp.

21

Stephens, Mitchell. "Media and Media Policy in West Germany: The Press and Broad-Casting Since 1945." American Journalism 8, no. 2-3 (1991): 220–21. http://dx.doi.org/10.1080/08821127.1991.10731378.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

Jakubowicz, Karol. "Mass (?) Communication (?). as Contemporary Broad Casting Evolves, Both Terms Are Acquiring Quite New Meanings." Gazette (Leiden, Netherlands) 36, no. 1 (1985): 39–53. http://dx.doi.org/10.1177/001654928503600103.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Hamza, Muneer Asam. "Adaptation of happy seeder in combine harvested paddy fields a case study of district Sheikhupura Punjab, Pakistan." International Journal of Biosciences (IJB) 16, no. 1 (2020): 314–19. https://doi.org/10.12692/ijb/16.1.314-319.

Pełny tekst źródła

Streszczenie:

Rice residue has high contamination of silica particles therefore it is not a good feed for animals as compared to wheat straw. Performance evaluations of different sowing techniques were conducted in combine harvested residue field. Experiment was conducted at four different locations of district Sheikhupura, Dera Arain, Saranwala, Dera Balm and Sakna Dahir during 2017-18. The wheat variety GALAXY-2013 was sown in the residue field. Purpose to conduct this experimental study was to compare the performance of different wheat sowing machinery in combine harvested residue field at four different

Style APA, Harvard, Vancouver, ISO itp.

24

Nabialek, Marcin, Pawel Pietrusiewicz, Michal Szota, Mohd Mustafa Al Bakri Abdullah, and Andrei Victor Sandu. "The Structure and Porosity of Fe62-xCo10WyMexY8B20-y Alloys in the Amorphous and Crystalline States (where: Me = Mo, Nb; x = 0, 1, 2; y = 0, 1, 2)." Revista de Chimie 68, no. 1 (2017): 22–27. http://dx.doi.org/10.37358/rc.17.1.5381.

Pełny tekst źródła

Streszczenie:

The investigated crystalline and amorphous samples were obtained by crystallization of the liquid alloy on a water-cooled copper plate and by an injection-casting method, respectively. In each case, the structure of the samples was determined by examination of the obtained X-ray diffraction patterns. The diffraction patterns of samples produced by the injection casting method were characterized by a single broad peak called the amorphous halo. The samples produced by the crystallization method were shown to feature within their structure the following phases:YB2, Fe2Y, �-Fe, Co5Y, and B6Co23.

Style APA, Harvard, Vancouver, ISO itp.

25

Falkus, Jan, Katarzyna Miłkowska-Piszczek, Paweł Krajewski, and Tomasz Ropka. "Method of Verification of Carbon Segregation Ratio Determined with Experimental Methods." Metals 10, no. 4 (2020): 499. http://dx.doi.org/10.3390/met10040499.

Pełny tekst źródła

Streszczenie:

The problem of macrosegregation of alloying elements occurring during cast strand solidification in the continuous casting process is still valid; it is the subject of numerous experiments and theoretical considerations. A large percentage of this research is dedicated to carbon segregation, which, for understandable reasons, is vital for the production of high-carbon steels. The background knowledge on the mechanism of segregation occurrence indicates that it is a very complex effect, and a broad range of factors influencing the continuous casting process need to be considered. Therefore, it

Style APA, Harvard, Vancouver, ISO itp.

26

Nordin, Arbain Fitri, Nurul Fitriah Nasir, Shahrul Azmir Osman, Sharvin Ramesh, and Ali Nasr Adbulkareem. "Review of Aluminium (AA6061) Metal Matrix Composite (MMC) by Stir Casting Method." Journal of Advanced Research in Applied Mechanics 128, no. 1 (2024): 115–28. https://doi.org/10.37934/aram.128.1.115128.

Pełny tekst źródła

Streszczenie:

Industrial development has boosted the use of aluminium to accommodate high demand. Among the most popular aluminium alloys is the AA6061 of the 6xxx series due to it characteristics. AA6061 is a preferred matrix material for Metal Matrix Composite (MMC) fabrication. This study comprehensively reviews an AA6061 aluminium matrix composite produced through the liquid processing technique-stir casting. This review focuses on process parameters, manufacture of conventional mixtures, range of reinforcement, mechanical and tribology properties of AA6061 composites. Significant findings show that inc

Style APA, Harvard, Vancouver, ISO itp.

27

Fang, Changming, Zhongping Que, Maaouia Souissi та Zhongyun Fan. "Crystal Chemistry and Physical Properties of A Quaternary Intermetallic Compound, θ-(Al0.8718Cu0.0256Si0.1026)13Fe4". Metals 12, № 12 (2022): 2112. http://dx.doi.org/10.3390/met12122112.

Pełny tekst źródła

Streszczenie:

θ-Al13Fe4 particles form as a primary Fe intermetallic compound (Fe-IMC) during the casting of commercial Al metals and alloys that inevitably contain Fe and Si as impurities. Moreover, the excellent mechanical performances of the Al-Cu alloys demand knowledge about the structural chemistry of the Fe-IMCs, including the θ-phase in the quaternary Al-Cu-Fe-Si system. Here, we investigate the stability, crystal structure, and electronic and mechanical properties of the Cu and Si co-doped θ-phase using a first-principles density-functional theory approach. The calculations reveal high stability of

Style APA, Harvard, Vancouver, ISO itp.

28

Weiss, David, and Michael Black. "The Use of High Pressure Direct Squeeze Casting for Semi-Solid Processing of Aluminum Base Nano Composites." Solid State Phenomena 192-193 (October 2012): 72–75. http://dx.doi.org/10.4028/www.scientific.net/ssp.192-193.72.

Pełny tekst źródła

Streszczenie:

The production of nano-reinforced aluminium alloys in volume and quality suitable for subsequent shape casting has been problematic. Large specific surface area and high interfacial energy of the particles combined with high surface tension of the aluminium melt makes it difficult to add appreciable numbers of particles to the melt, even when later de-agglomerated by techniques such as ultrasonic cavitation. The objective of this work was to develop a technique to incorporate particles using pressure applied while the alloy was in a semi-solid state. The composites produced could be used as a

Style APA, Harvard, Vancouver, ISO itp.

29

Doherty, David, Conor M. Dowling, Alan S. Gerber, and Gregory A. Huber. "Should I Cast an Ill-Informed Ballot? Examining the Contours of the Normative Obligation to Vote." American Politics Research 47, no. 5 (2019): 1081–99. http://dx.doi.org/10.1177/1532673x18821359.

Pełny tekst źródła

Streszczenie:

Proparticipatory norms play a central role in driving turnout. However, a broad norm that people are supposed to vote cannot explain why some people fail to participate or why rates of participation vary sharply across elections. We argue that the norm of voting extends beyond the mere act of voting. We present empirical evidence supporting the position that the social rewards for participating are conditional. The social rewards for casting an ill-informed vote are far smaller than those associated with casting an informed ballot. Moreover, some low-information voting strategies are viewed as

Style APA, Harvard, Vancouver, ISO itp.

30

Li, Huirong, Yueying He, Haichao Zhang, Tao Ma, and Yungang Li. "Study on the Bonding Mechanism of Copper-Low Carbon Steel for Casting Compounding Process." Metals 11, no. 11 (2021): 1818. http://dx.doi.org/10.3390/met11111818.

Pełny tekst źródła

Streszczenie:

The casting compounding process for copper-steel composite material has broad prospects of application, but due to the lack of supporting theories (especially the bonding mechanism of copper-steel at high temperatures), it is developing slowly. In this research, copper-steel composite materials for different casting temperatures have been prepared by the casting compound process. The results show that, for the casting compound process, the stable copper-steel transition layer can be formed in a short time, and the bonding of copper and low carbon steel is the result of both the diffusion of Cu

Style APA, Harvard, Vancouver, ISO itp.

31

Koneva, Elena V., and Vladimir K. Solondaev. "Relevant information in the era of a pandemic: ways of broad-casting and peculiarities of perception." Vestnik Yaroslavskogo gosudarstvennogo universiteta im. P. G. Demidova. Seriya gumanitarnye nauki 15, no. 4 (2021): 592–601. http://dx.doi.org/10.18255/1996-5648-2021-4-592-601.

Pełny tekst źródła

Streszczenie:

The choice of the subject of the article is due to the fact that numerous recent publications actively analyze the reaction of people to information about COVID-19, but do not investigate the stage of actually receiving and understanding this information by citizens. Using the example of the publication in the regional electronic edition of the telegram channel of the regional administration, some factors affecting the perception and understanding of information concerning the health of schoolchildren and teachers are studied. An empirical characteristic of the change in understanding is given

Style APA, Harvard, Vancouver, ISO itp.

32

Boutiette, Amber L., Cristoffer Toothaker, Bailey Corless, Chouaib Boukaftane, and Caitlin Howell. "3D printing direct to industrial roll-to-roll casting for fast prototyping of scalable microfluidic systems." PLOS ONE 15, no. 12 (2020): e0244324. http://dx.doi.org/10.1371/journal.pone.0244324.

Pełny tekst źródła

Streszczenie:

Microfluidic technologies have enormous potential to offer breakthrough solutions across a wide range of applications. However, the rate of scale-up and commercialization of these technologies has lagged significantly behind promising breakthrough developments in the lab, due at least in part to the problems presented by transitioning from benchtop fabrication methods to mass-manufacturing. In this work, we develop and validate a method to create functional microfluidic prototype devices using 3D printed masters in an industrial-scale roll-to-roll continuous casting process. There were no sign

Style APA, Harvard, Vancouver, ISO itp.

33

Zaia, Rachel, Giovanna M. Quinto, Livia C. S. Camargo, Rodrigo T. Ribeiro, and Ana M. Carmona-Ribeiro. "Transient Coatings from Nanoparticles Achieving Broad-Spectrum and High Antimicrobial Performance." Pharmaceuticals 16, no. 6 (2023): 816. http://dx.doi.org/10.3390/ph16060816.

Pełny tekst źródła

Streszczenie:

Cationic and hydrophilic coatings based on casting and drying water dispersions of two different nanoparticles (NPs) onto glass are here described and evaluated for antimicrobial activity. Discoid cationic bilayer fragments (BF) surrounded by carboxy-methylcellulose (CMC) and poly (diallyl dimethyl ammonium) chloride (PDDA) NPs and spherical gramicidin D (Gr) NPs dispersed in water solution were cast onto glass coverslips and dried, forming a coating quantitatively evaluated against Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans. From plating and colony forming units (CFU)

Style APA, Harvard, Vancouver, ISO itp.

34

Adamiec, Janusz. "Weldability of the MSRB Magnesium Alloy." Solid State Phenomena 176 (June 2011): 107–18. http://dx.doi.org/10.4028/www.scientific.net/ssp.176.107.

Pełny tekst źródła

Streszczenie:

This work, in combination with industrial tests of casting welding, shows that the causes of high-temperature brittleness are the partial tears of the structure and the hot cracks of both the castings, as well as the welded and padded joints. Such phenomena should be treated as irreversible failures caused by the process of crystallization that is in the area of co-existence of the solid and liquid structural constituent. Nil-strength temperature (NST), nil-ductility temperature (NDT) and ductility recovery temperature (DRT) were determined using Gleeble 3800. Obtained results enabled the defi

Style APA, Harvard, Vancouver, ISO itp.

35

Webley, Leo, and Sophia Adams. "Material Genealogies: Bronze Moulds and their Castings in Later Bronze Age Britain." Proceedings of the Prehistoric Society 82 (July 27, 2016): 323–40. http://dx.doi.org/10.1017/ppr.2016.8.

Pełny tekst źródła

Streszczenie:

Bivalve bronze moulds were used for casting bronze and lead objects – mainly axes – during the Middle and Late Bronze Age. These remarkable artefacts, which were sometimes beautifully decorated, have been surprisingly little studied. This paper discusses the bronze moulds from Britain, outlining the range of possibilities that existed for the life courses of these objects during the three broad stages of manufacture, use, and deposition. Two points will be emphasised. First, it will be shown that the biographical pathways available to bronze moulds differed significantly from those of moulds m

Style APA, Harvard, Vancouver, ISO itp.

36

Hu, Hao, Shulin Li, Jiaxin Huang, Bo Liu, and Change Che. "Casting Product Image Data for Quality Inspection with Xception and Data Augmentation." Journal of Theory and Practice of Engineering Science 3, no. 10 (2023): 42–46. http://dx.doi.org/10.53469/jtpes.2023.03(10).06.

Pełny tekst źródła

Streszczenie:

Casting defects encompass a broad spectrum of imperfections, such as blow holes, pinholes, burrs, shrinkage defects, and various metallurgical anomalies. Detecting these defects manually requires a trained eye, and even the most diligent inspectors can inadvertently overlook subtle irregularities. To address these challenges, there is a growing movement toward automation in quality control. Deep learning models, including the Xception model, are being harnessed to create a robust classification system. Such models have the capacity to analyze thousands of product images with precision, identif

Style APA, Harvard, Vancouver, ISO itp.

37

Jeon, Mihyang. "The Influence of Empathic Response of Watching SNS Broadcasting Clip on the Curiosity and Viewing Intention of Live program." Korean Society of Culture and Convergence 45, no. 10 (2023): 13070–1314. http://dx.doi.org/10.33645/cnc.2023.10.45.10.1307.

Pełny tekst źródła

Streszczenie:

This study analyzes the effect of empathic response of watching SNS broad- casting clips on the Curiosity and viewing intention of live program. Results indicated that empathetic understanding, identification, and vicarious emotional response have immediate effects on Curiosity. The Curiosity for the main broadcast had a positive effect on the viewing intention of live program, thus the mediating effect was verified. This shows that empathic response plays significant roles in developing Curiosity and viewing intention of watching the main show while viewing SNS broadcasting clips.

Style APA, Harvard, Vancouver, ISO itp.

38

Reyes, Pablo, Mariya Edeleva, Dagmar R. D’hooge, Ludwig Cardon, and Pieter Cornillie. "Combining Chromatographic, Rheological, and Mechanical Analysis to Study the Manufacturing Potential of Acrylic Blends into Polyacrylic Casts." Materials 14, no. 22 (2021): 6939. http://dx.doi.org/10.3390/ma14226939.

Pełny tekst źródła

Streszczenie:

Polyacrylics have been considered for a broad range of material applications, including coatings, dental applications, and adhesives. In this experimental study, the casting potential of a group of (co)monomers belonging to the acrylic family has been explored to enable a more sustainable use of these polymer materials in the medical and veterinary science field. The individual contributions of each comonomer have been analyzed, the reaction conversion has been studied via gas chromatography (GC), the rheological behavior has been characterized via stress-controlled measurements, and the final

Style APA, Harvard, Vancouver, ISO itp.

39

Cano-Vicent, Alba, Alberto Tuñón-Molina, Miguel Martí, and Ángel Serrano-Aroca. "Biocompatible Chitosan Films Containing Acetic Acid Manifested Potent Antiviral Activity against Enveloped and Non-Enveloped Viruses." International Journal of Molecular Sciences 24, no. 15 (2023): 12028. http://dx.doi.org/10.3390/ijms241512028.

Pełny tekst źródła

Streszczenie:

Chitosan films were prepared by solvent casting using an acetic acid-based solution. The films that were developed contained 15.49% of acetic acid solution (10% v/v) and showed biocompatibility in vitro in human keratinocyte HaCaT cells and potent antiviral activity against both enveloped and non-enveloped viruses. The results showed up to 99.98% and 99.92% viral inactivation against the phi 6 enveloped bacteriophage and MS2 non-enveloped bacteriophage, respectively, suggesting that this chitosan/acetic acid film is a promising material for biomedical applications that require biodegradable br

Style APA, Harvard, Vancouver, ISO itp.

40

Jasvir, Markandy1 Manmohan Sharma2. "DIMINISH THE FLOODING ATTACK USING MUTUAL AUTHENTICATION IN MOBILE AD-HOC NETWORK." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 7, no. 5 (2018): 24–30. https://doi.org/10.5281/zenodo.1241365.

Pełny tekst źródła

Streszczenie:

Mobile ad-hoc network (MANET) is a group of wireless mobile nodes and dedicated routers used by base station. MANET application in mobility management, broad casting, and bandwidth management are important issue in routing and information gathering<strong>. </strong>In MANET, Different types of attack has been developed today which degrade the performance of network and makes it less efficient like SYN flooding, Black hole attack,Worm hole attack, Grey hole attack etc.In this paper, we are representing flooding attack proposed by various author inmobile ad-hoc network.

Style APA, Harvard, Vancouver, ISO itp.

41

Kroupová, I., V. Bednářová, T. Elbel, and F. Radkovský. "Proposal of Method of Removal of Mould Material from the Fine Structure of Metallic Foams used as Filters." Archives of Metallurgy and Materials 59, no. 2 (2014): 727–30. http://dx.doi.org/10.2478/amm-2014-0120.

Pełny tekst źródła

Streszczenie:

Abstract Metallic foams are materials that are subject of an ongoing research with the broad applicability in many different areas (e.g. automotive industry, building industry, medicine, etc.). These metal materials contain in their structure artificially created pores. These pores give them specific properties, such as: large rigidity at low density, high thermal conductivity, capability to absorb energy, etc. Since the discovery of porous metallic materials numerous methods of production have been developed. The aim of the paper is to introduce effective casting methods of manufacturing of m

Style APA, Harvard, Vancouver, ISO itp.

42

Jiao, Z. H., R. D. Xu, H. C. Yu, L. L. Wu, and X. R. Wu. "Study on high cycle fatigue performance at elevated temperature for a selective laser melted Ti6Al4V alloy." Journal of Physics: Conference Series 2686, no. 1 (2024): 012025. http://dx.doi.org/10.1088/1742-6596/2686/1/012025.

Pełny tekst źródła

Streszczenie:

Abstract Selective laser melted Ti6Al4V alloy has broad application prospects in aeroengine field. In this study, high cycle fatigue tests were carried out systematically using hourglass shaped specimen (K t=1) at 400 °C. The S-N curves were acquired and compared with data of the casting and the forging. The anisotropy and the defect effects of the fatigue performance were analysed. The LOF defects on the surface and subsurface preferentially act as the fatigue crack initiation site for almost all the tested HCF specimens. The position and irregularity of defect have greater influence on eleva

Style APA, Harvard, Vancouver, ISO itp.

43

Xu, Quanbiao, Shenghang Yang, Benyue Li, Mingwei Xu, and Mingshan Zhang. "Experimental Study on the Seismic Performance of Pre-Inserted Prefabricated Shear Walls." Buildings 15, no. 11 (2025): 1945. https://doi.org/10.3390/buildings15111945.

Pełny tekst źródła

Streszczenie:

The pre-inserted method for precast shear walls involves casting concealed beams at floor slabs between upper and lower structures, with precast concrete supports spaced at intervals. Vertical rebars at the base of upper walls are pre-inserted and anchored in the beams before slab casting. It offers advantages such as convenient construction without the need for grouting, demonstrating broad application prospects and significant promotional value. To evaluate seismic performance, quasi-static cyclic loading tests were conducted on five specimens: three full-scale pre-inserted precast walls and

Style APA, Harvard, Vancouver, ISO itp.

44

Zou, Rui Nong, and Jie Yang. "Exploration of Rotation Lowering with Building RC Box-Rib Arch Bridge." Applied Mechanics and Materials 443 (October 2013): 100–104. http://dx.doi.org/10.4028/www.scientific.net/amm.443.100.

Pełny tekst źródła

Streszczenie:

Arch rib construction of Zhenzhu Bridge on the road from Wuchuan to Pengshui in Guizhou uses construction technology of vertical casting in the first place, and then vertical rotation, and the total weight of which is 610t. This paper introduces technical points and process of vertical rotation construction, and has made beneficial exploration and summary of such kind of construction technology.OverviewBridge rotation construction has advantages including saving costs for hoisting and erecting frames, reducing risks of frames losing stability when casting arch rib concrete, convenient, flexibl

Style APA, Harvard, Vancouver, ISO itp.

45

Ahmad, Sufizar, Marziana Abdoll Latif, Hariati Taib, and Ahmad Fauzi Ismail. "Short Review: Ceramic Foam Fabrication Techniques for Wastewater Treatment Application." Advanced Materials Research 795 (September 2013): 5–8. http://dx.doi.org/10.4028/www.scientific.net/amr.795.5.

Pełny tekst źródła

Streszczenie:

Ceramic foam is a class of highly porous materials that are used for wide range of technological applications, specifically as absorbents and membrane for wastewater treatment process. Among the potential materials include silicon carbide (SiC), alumina (Al2O3), zirconia (ZrO2), titania (TiO2), and silica (SiO2). The review clarifies on the broad types of ceramic foam, and the common techniques of foam fabrication, such as polymeric sponge method, starch consolidation, direct foaming, and gel-casting of foam. The parameters of each fabrication techniques will be discussed crucial based on the

Style APA, Harvard, Vancouver, ISO itp.

46

Sharma, Sarla, Rishi Vyas, and Y. K. Vijay. "A Study on Luminescence Enhancement in Ion Irradiated TiO₂/Poly(methyl methacrylate) Nanocomposites." Advanced Materials Research 585 (November 2012): 139–43. http://dx.doi.org/10.4028/www.scientific.net/amr.585.139.

Pełny tekst źródła

Streszczenie:

Swift heavy ion induced modification in the optical properties of TiO2/Poly (Methyl methacrylate) nanocomposites is reported in this paper. The as prepared anatase TiO2 nanoparticles were uniformly dispersed in PMMA matrix using solution casting method. These nanocomposites were then irradiated with Ag+12 (120 MeV) ion beam and characterized by X-ray diffraction, scanning electron microscopy, UV-Vis spectroscopy, PL and Raman spectroscopy. The PL spectra exhibited an enhanced broad emission peak in visible region (400 nm - 750 nm) while UV-Vis spectroscopy revealed an increased absorption in v

Style APA, Harvard, Vancouver, ISO itp.

47

Tian, Ding, Taoli Gu, Sai Nitin Yellamilli, and Chulsung Bae. "Phosphoric Acid-Doped Ion-Pair Coordinated PEMs with Broad Relative Humidity Tolerance." Energies 13, no. 8 (2020): 1924. http://dx.doi.org/10.3390/en13081924.

Pełny tekst źródła

Streszczenie:

Proton exchange membrane (PEM) capable of working over a broad operating condition window is critical for successful adoption of PEM-based electrochemical devices. In this work, phosphoric acid (PA)-doped biphenyl-backbone ion-pair coordinated PEMs were prepared by quaternization of BPBr-100, a precursor polymer, with three different tertiary amines including trimethylamine, 1-methylpiperidine, and 1,2-dimethylimidazole followed by membrane casting, ion exchange reaction to hydroxide ion, and doping with PA. The resulting PA-doped ion-pair PEMs were characterized in terms of PA doping level, p

Style APA, Harvard, Vancouver, ISO itp.

48

Ayush, Gupta, Poddar Mayank, Chouksey Shiv, and Chaudhary Deepak. "Efficacy Of Clotrimazole Powder In Preventing Dermatological Complications Underneath Orthopedic Casts: A Comparative Study." International Journal of Pharmaceutical and Clinical Research 16, no. 8 (2024): 791–96. https://doi.org/10.5281/zenodo.13539977.

Pełny tekst źródła

Streszczenie:

<strong>Background: </strong>POP Casts that are placed or applied for fractures and immbolisation. Throughout and following period during which casts are applied and after removal – cutaneous discomfort, itching, pain, and malodor are frequent, particularly in warm and damp surroundings. Clotrimazole is a synthetic imidazole with a broad spectrum of antimycotic activity. <strong>Methodology:</strong> A total of 60 patients were recruited with fractures of various parts of body such as of the distal radius, tibia, radio-ulnar shaft, as well as other limb components. The pat

Style APA, Harvard, Vancouver, ISO itp.

49

Ayush, Gupta, Poddar Mayank, Chouksey Shiv, and Chaudhary Deepak. "Efficacy Of Clotrimazole Powder In Preventing Dermatological Complications Underneath Orthopedic Casts: A Comparative Study." International Journal of Pharmaceutical and Clinical Research 16, no. 8 (2024): 791–96. https://doi.org/10.5281/zenodo.13539977.

Pełny tekst źródła

Streszczenie:

<strong>Background: </strong>POP Casts that are placed or applied for fractures and immbolisation. Throughout and following period during which casts are applied and after removal – cutaneous discomfort, itching, pain, and malodor are frequent, particularly in warm and damp surroundings. Clotrimazole is a synthetic imidazole with a broad spectrum of antimycotic activity. <strong>Methodology:</strong> A total of 60 patients were recruited with fractures of various parts of body such as of the distal radius, tibia, radio-ulnar shaft, as well as other limb components. The pat

Style APA, Harvard, Vancouver, ISO itp.

50

Kang, Seongsu, Ji Eun Song, Seung-Hyun Jun, Sun-Gyoo Park, and Nae-Gyu Kang. "Sugar-Triggered Burst Drug Releasing Poly-Lactic Acid (PLA) Microneedles and Its Fabrication Based on Solvent-Casting Approach." Pharmaceutics 14, no. 9 (2022): 1758. http://dx.doi.org/10.3390/pharmaceutics14091758.

Pełny tekst źródła

Streszczenie:

Microneedles have emerged as a novel transdermal delivery tool that enables the delivery of various products such as drugs, vaccines, or cosmetic ingredients. Although the demand for solid microneedles composed of biocompatible polymer is increasing, the manufacture of microneedles using poly-lactic acid (PLA) with rapid drug-releasing is yet to be established and the process is still in its infancy. Here, we propose a novel strategy for the fabrication of PLA solid microneedles which enable a drug to be burst-released based on a solvent-casting process. This approach offers extreme simplicity

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!