Gotowa bibliografia na temat „CFD”

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „CFD”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "CFD"

1

A., Aswandi, B. L. Syaefullah, D. A. Iyai, and M. Jen Wajo. "UTILIZATION OF CARBOHYDRATE POTENTIAL IN VARIOUS KINDS OF BANANA COB FLOUR BANANA IN KACANG GOATS." IRAQI JOURNAL OF AGRICULTURAL SCIENCES 53, no. 4 (2022): 732–42. http://dx.doi.org/10.36103/ijas.v53i4.1583.

Pełny tekst źródła
Streszczenie:
The objective of this research was to observe the productivity in kacang goats which were given a complete feed containing flour of various types of banana plant weevils. The material studied in this study was six complete types of feed. Complete feed containing weevil flour from 5 banana plant varieties. Complete feed is prepared with a complete feed composition. The cattle used were 18 male bean goats, mean initial body weight, 15.42 ± 1.98 kg (CV: 13.73%) aged 10-15 months. Livestock is given complete feed containing banana weevil flour for 60 days. The cage is 12 m x 6m in size, constructi
Style APA, Harvard, Vancouver, ISO itp.
2

Scheer, Justin K., Jessica Tang, Johnny Eguizabal, et al. "Optimal reconstruction technique after C-2 corpectomy and spondylectomy: a biomechanical analysis." Journal of Neurosurgery: Spine 12, no. 5 (2010): 517–24. http://dx.doi.org/10.3171/2009.11.spine09480.

Pełny tekst źródła
Streszczenie:
Object Primary spine tumors frequently involve the C-2 vertebra. Complete resection of the lesion may require total removal of the C-2 vertebral body, pedicles, and dens process. Authors of this biomechanical study are the first to evaluate a comprehensive set of reconstruction methods after C-2 resection to determine the optimal configuration depending on the degree of excision required. Methods Eight human heads (from the skull to C-6) from 4 males and 4 females with a mean age of 68 ± 18 years at death were cleaned of tissue, while leaving ligaments and discs intact. Nondestructive flexion
Style APA, Harvard, Vancouver, ISO itp.
3

YAMAMOTO, Satoru. "Paradigm Shift of CFD toward CFC." TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series B 77, no. 774 (2011): 195–204. http://dx.doi.org/10.1299/kikaib.77.195.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Burger, C. J., S. J. van der Spuy, and T. W. von Backström. "Design of a Compact Crossover Diffuser for Micro Gas Turbines Using a Mean-Line Code." International Journal of Turbo & Jet-Engines 36, no. 4 (2019): 347–57. http://dx.doi.org/10.1515/tjj-2017-0021.

Pełny tekst źródła
Streszczenie:
Abstract The design and validation of a Compact Crossover Diffuser (CCD) to replace the size-limited radial diffuser and axial de-swirl cascade of an existing Micro Gas Turbine (MGT) is discussed. A CCD strives to combine the performance of a channel diffuser with the operating range and efficiency of a vaneless diffuser. The development of a one-dimensional Mean-Line Code (MLC) is presented, which aids the designer in preliminary design and performance evaluation of the CCD. Design graphs indicating the performance effects of changing the primary design variables are developed and shown. The
Style APA, Harvard, Vancouver, ISO itp.
5

Agonafer, D., and A. Vimba. "Solid Model Based Preprocessor to CFD Code for Applications to Electronic Cooling Systems." Journal of Electronic Packaging 119, no. 2 (1997): 138–43. http://dx.doi.org/10.1115/1.2792220.

Pełny tekst źródła
Streszczenie:
The use of a solid model based Computer Aided Design (CAD) tool as a preprocessor to a finite control-volume based Computational Fluid Dynamics (CFD) code is presented. Preprocessing includes geometry description, grid generation, definition of material properties, application of boundary conditions, and definition of solution control parameters. The CAD based preprocessor, as opposed to traditional finite control-volume preprocessors, provides the above capabilities in a powerful graphic environment. Using a solid model based CAD tool, work is reduced, and visualization is enhanced employing
Style APA, Harvard, Vancouver, ISO itp.
6

Perić, M. "Simulation of Flows in Complex Geometries: New Meshing and Solution Methods." NAFEMS International Journal of CFD Case Studies 6 (March 2007): 27–37. http://dx.doi.org/10.59972/utux3hbg.

Pełny tekst źródła
Streszczenie:
The use of CFD is spreading in all areas of engineering. The flow domains are usually very complicated, which places high demands on both meshing and solution methods. In this manuscript the newest developments in the handling of complex geometries in CFD are presented. The limitations with respect to the shape of control volumes that may appear in a numerical grid are lifted: cells of arbitrary polyhedral shape are allowed. CAD-integration of all CFD tools and automatic generation of polyhedral meshes, as well as a solution method that can use such meshes, are also presented and the advantage
Style APA, Harvard, Vancouver, ISO itp.
7

Cui, Hong Jiang, Ming Hai Li, and Ying Guan. "The Performance Simulation and Optimization Research on Intake Port of Locomotive Diesel Engine." Advanced Materials Research 443-444 (January 2012): 1007–13. http://dx.doi.org/10.4028/www.scientific.net/amr.443-444.1007.

Pełny tekst źródła
Streszczenie:
.In order to manufacture high quality intake port with bigger discharge coefficient and appropriate swirl ratio for diesel engine performance improvement, intake port tests and CFD simulation method were combined together to optimize its structure. The three-dimensional CAD model of intake port was built and was putted into AVL–FIRE platform to do CFD simulation with appropriate turbulence model and calculation method. The detailed air flow information was obtained by CFD simulation. After analyzing, two optimization programs were discussed. This research shows that CFD simulation is a powerfu
Style APA, Harvard, Vancouver, ISO itp.
8

Xu, Qing, Yu-Xing Li, Xiao-Ning Li, et al. "Simulation of SiO2 etching in an inductively coupled CF4 plasma." Modern Physics Letters B 31, no. 06 (2017): 1750042. http://dx.doi.org/10.1142/s0217984917500427.

Pełny tekst źródła
Streszczenie:
Plasma etching technology is an indispensable processing method in the manufacturing process of semiconductor devices. Because of the high fluorine/carbon ratio of CF4, the CF4 gas is often used for etching SiO2. A commercial software ESI-CFD is used to simulate the process of plasma etching with an inductively coupled plasma model. For the simulation part, CFD-ACE is used to simulate the chamber, and CFD-TOPO is used to simulate the surface of the sample. The effects of chamber pressure, bias voltage and ICP power on the reactant particles were investigated, and the etching profiles of SiO2 w
Style APA, Harvard, Vancouver, ISO itp.
9

Rachmanu, Fatkur. "DESAIN ULANG IMPELER POMPA SENTRIFUGAL KURVA PRESTASI SERTA FENOMENA ALIRAN DENGAN CAD-CFD." Simetris : Jurnal Teknik Mesin, Elektro dan Ilmu Komputer 7, no. 2 (2016): 649. http://dx.doi.org/10.24176/simet.v7i2.777.

Pełny tekst źródła
Streszczenie:
Pompa adalah alat untuk memindahkan cairan dari dataran rendah ke dataran tinggi. Pengoperasiannya bila lama digunakan akan mengurangi efisiensi dari prestasi pompa tersebut sehingga diperlukan perbaikan dan perawatan. Salah satu perawatannya antara lain dengan memperbaiki komponen utamanya yaitu impeler atau baling-baling. Pada pembuatan impeler tahap pertama adalah desain bentuk impeler dengan memperhatikan beberapa parameter sehingga meningkatan efisiensi pompa. Tujuan penelitian ini adalah untuk mengubah profil impeler agar efisiensi meningkat dan mendapatkan impeler yang lebih efektif den
Style APA, Harvard, Vancouver, ISO itp.
10

Wang, Chenye, Caifei Ding, Zhoujia Hua, Chunyue Chen, and Jia Yu. "Cangfudaotan Decoction Alleviates Insulin Resistance and Improves Follicular Development in Rats with Polycystic Ovary Syndrome via IGF-1-PI3K/Akt-Bax/Bcl-2 Pathway." Mediators of Inflammation 2020 (November 24, 2020): 1–16. http://dx.doi.org/10.1155/2020/8865647.

Pełny tekst źródła
Streszczenie:
Polycystic ovary syndrome (PCOS) is the most common endocrine and metabolic disorder prevalent in females of reproductive age; insulin resistance (IR) is the major pathogenic driver. Pharmacology is a basic option for PCOS therapy; traditional Chinese medicine (TCM), as a significant part of complementary and alternative medicine, has a long history in the clinical management of PCOS. Cangfudaotan decoction (CFD) has been used clinically for gynaecological diseases especially PCOS. In this study, first, chemical components in CFD were clarified using UPLC-Q/TOF-MS analysis. Then, an animal mod
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "CFD"

1

Björk, Johan. "Compressor CFD simulation method development : A CFD study." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-69880.

Pełny tekst źródła
Streszczenie:
This master thesis project consisted of three parts that all were performed through CFD simulations with the purpose to develop Scania's methods in the subject of CFD. All parts included simulations on Scania's SC92T70 centrifugal compressor. Part one consisted of performing a mesh study for the purpose of reliability, to investigate the convergence of different parameters by refining the boundary layer. The method used is an inflation option called First layer thickness. Five different meshes were generated where the Richardson extrapolation method was used to examine the parameters between t
Style APA, Harvard, Vancouver, ISO itp.
2

King, Matthew Lee. "A CAD-centric Approach to CFD Analysis With Discrete Features." Diss., CLICK HERE for online access, 2004. http://contentdm.lib.byu.edu/ETD/image/etd570.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Du, Jianyi. "Combustion CFD simulation." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0018/NQ56437.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Gilani, Mohammad Nejad Hamzeei. "CFD of droplet entrainment." Thesis, Imperial College London, 2011. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.542939.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Heinz, Matthias. "CFD- Berechnung von Axialkolbenpumpen." Technische Universität Chemnitz, 2019. https://monarch.qucosa.de/id/qucosa%3A34344.

Pełny tekst źródła
Streszczenie:
Axialkolbenpumpen bieten eine hohe Leistungsdichten und einfache Regelbarkeit. Allerdings neigen sie zu Kavitation, mit der Gefahr der Beschädigung und erhöhter Geräuschbildung durch Druckpulsationen. Die numerische Strömungssimulation bietet die Möglichkeit, die transienten Prozesse innerhalb dieser Pumpen zu verstehen und Optimierungsmöglichkeiten aufzuzeigen. Die komplexe Bewegung der Kolben erfordert bewegte Gitter, die translatorische und rotatorische Bewegungen sehr genau abbilden müssen. Die zu fördernde Hydraulikflüssigkeit muss als kompressibles Medium behandelt werden, insbesondere d
Style APA, Harvard, Vancouver, ISO itp.
6

Zaffagnini, Alberto. "Modellazione CFD di manufatti idraulici." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2016.

Znajdź pełny tekst źródła
Streszczenie:
Nel presente lavoro di tesi vengono studiati, per mezzo di simulazioni numeriche di fluidodinamica computazionale, diversi manufatti idraulici, partendo da casi più semplici la cui trattazione teorica e sperimentale è ampiamente conosciuta, come flusso attraverso una soglia e moto uniforme in canale rettangolare, fino a casi complessi di cui non esistono formulazioni teoriche ma solo sperimentali come pozzetti di salto cilindrici. In particolare, come caso conclusivo, si studia il comportamento di un manufatto ripartitore realmente esistente in un impianto di trattamento delle acque reflue.
Style APA, Harvard, Vancouver, ISO itp.
7

Nøttveit, Erlend. "Numerisk analyse (CFD) av stempelpumpe." Thesis, Norwegian University of Science and Technology, Department of Energy and Process Engineering, 2010. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-10575.

Pełny tekst źródła
Streszczenie:
<p>I denne oppgåva er det sett nærare på lekkasjar i stempelpumper. I starten presenterast den nødvendige teorien for CFD, pumper og spalter. Ein definerer ”deformasjons-lekkasje/trykk-lekkasje” som eit forhold. Berekningar blir gjort på bakgrunn av teorien slik at ein konkret kan talfesta dette forholdet. Etter dette blir simuleringane som er utført presangtert og diskutert. Den første simuleringa er for ein enkel sylinder utan veggar. Det er med andre ord berre veskevolumet som er med. Denne modellen er brukt til å lære teknikken for ”deforming mesh”. Dette er ein teknikk som er nødvendig f
Style APA, Harvard, Vancouver, ISO itp.
8

Vangbo, Petter Olav. "CFD in conceptual ship design." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for marin teknikk, 2011. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-15480.

Pełny tekst źródła
Streszczenie:
Computational Fluid Dynamics (CFD) has been around for many years. It is a computer tool that can be used to find the hydrodynamic fluid performances. In ship design it is used in a wide area from smoke propagation to resistance estimations. It is however in resistance estimations that CFD have had most focus and research. There are many tools a designer can make use of nowadays. Most of the tools are computer based. This is optimization algorithms, computer aided design (CAD) and computational fluid dynamics (CFD). Using the tools should shorten the time of ship design and make better solutio
Style APA, Harvard, Vancouver, ISO itp.
9

Erlandsson, Johan, and Patrik Berg. "Analys av turbulensmodeller för CFD." Thesis, Uppsala universitet, Kärnfysik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-161110.

Pełny tekst źródła
Streszczenie:
This thesis has been a part of Forsmarks Kraftgrupp AB's evaluation of a turbulence model used in simulation of turbulent flow called PRNS (Partially Resolved Numerical Simulation). This model has promising properties and may be of use in saving computational resources. The purpose of this thesis was to analyze this model and compare it with industrially applied models such as k-omega SST and LES (Large Eddy Simulations). PRNS works as a hybrid of the k-omega SST and DNS (Direct Numerical Simulation) where a constant, RCP (Resolution Control Parameter) with a value between 0 and 1 are selected
Style APA, Harvard, Vancouver, ISO itp.
10

Vusirikala, Shanti. "CFD simulation of contact planarization." Diss., Rolla, Mo. : University of Missouri-Rolla, 2007. http://scholarsmine.umr.edu/thesis/pdf/Vusirikala_09007dcc80446043.pdf.

Pełny tekst źródła
Streszczenie:
Thesis (M.S.)--University of Missouri--Rolla, 2007.<br>Vita. The entire thesis text is included in file. Title from title screen of thesis/dissertation PDF file (viewed March 25, 2008) Includes bibliographical references (p. 77-79).
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "CFD"

1

Schwarze, Rüdiger. CFD-Modellierung. Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-24378-3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Inc, Adams Golf, ed. Adams Golf tees off with integrated CAD and CFD. Knovel, 2011.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Norouzi, Hamid Reza, Reza Zarghami, Rahmat Sotudeh-Gharebagh, and Navid Mostoufi. Coupled CFD-DEM Modeling. John Wiley & Sons, Ltd, 2016. http://dx.doi.org/10.1002/9781119005315.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Wilcox, David C. Turbulence modeling for CFD. DCW Industries, Inc., 1993.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Wilcox, David C. Turbulence modeling for CFD. 2nd ed. DCW Industries, 1998.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Advisory Group for Aerospace Research and Development. Consultant and Exchange Programme. and Advisory Group for Aerospace Research and Development. Propulsion and Energetics Panel., eds. Turbomachinery design using CFD. Agard, 1994.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

L, Streett Craig, Hussaini M. Yousuff, and Langley Research Center, eds. Spectral methods for CFD. National Aeronautics and Space Administration, Langley Research Center, 1989.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Center, Lewis Research, ed. CFD for hypersonic propulsion. Lewis Research Center, 1991.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development. Turbomachinery design using CFD. AGARD, 1994.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Wilcox, David C. Turbulence modeling for CFD. DCW Industries, 1994.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "CFD"

1

Zhai, Zhiqiang. "Introduce CFD." In Computational Fluid Dynamics for Built and Natural Environments. Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-32-9820-0_1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Schwarze, Rüdiger. "Computational Fluid Dynamics." In CFD-Modellierung. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-24378-3_1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Schwarze, Rüdiger. "Rechengitter." In CFD-Modellierung. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-24378-3_2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Schwarze, Rüdiger. "Mathematische Modelle einer Strömung." In CFD-Modellierung. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-24378-3_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Schwarze, Rüdiger. "Numerische Methoden." In CFD-Modellierung. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-24378-3_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Schwarze, Rüdiger. "Newtonsche Strömungen." In CFD-Modellierung. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-24378-3_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Schwarze, Rüdiger. "Turbulente Strömungen." In CFD-Modellierung. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-24378-3_6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Schwarze, Rüdiger. "Anwendungen." In CFD-Modellierung. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-24378-3_7.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Bedford, Donald. "CFD or not CFD? That is the Question." In Waves and Particles in Light and Matter. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2550-9_40.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Campelo, Hugo. "CFD Scale Model." In Springer Theses. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-72703-5_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "CFD"

1

Fujii, K., and K. Miyaji. "WEB-CFD and beyond - CFD for non-CFD researchers." In 40th AIAA Aerospace Sciences Meeting & Exhibit. American Institute of Aeronautics and Astronautics, 2002. http://dx.doi.org/10.2514/6.2002-753.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Bull, Peter. "Validation of CFD For High Reynolds Number Ship Flows." In CFD 2003: CFD Technology In Ship Hydrodynamics. RINA, 2003. http://dx.doi.org/10.3940/rina.cfd.2003.9.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Coirier, W., S. Kim, and M. Showalter. "Fish-Like Locomotion: A CFD Simulation of Mit’s Robotuna." In CFD 2003: CFD Technology In Ship Hydrodynamics. RINA, 2003. http://dx.doi.org/10.3940/rina.cfd.2003.16.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Salui, K. B., and D. Vassalos. "A Rans Based Technique To Compute Forced Rolling RespOnses In." In CFD 2003: CFD Technology In Ship Hydrodynamics. RINA, 2003. http://dx.doi.org/10.3940/rina.cfd.2003.3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Seil, Gregory, J. Lundberg, and G. Petersson. "CFD Calculation and Experimental Validation of A Kamewa Highskew." In CFD 2003: CFD Technology In Ship Hydrodynamics. RINA, 2003. http://dx.doi.org/10.3940/rina.cfd.2003.14.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Iversen, Ivar. "Validation of Simulating Sloshing With CFD." In CFD 2003: CFD Technology In Ship Hydrodynamics. RINA, 2003. http://dx.doi.org/10.3940/rina.cfd.2003.17.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Bertram, Volker, Mario Caponetto, and Oud El Moctar. "Ranse Simulations For Unsteady Marine Two-Phase Flows." In CFD 2003: CFD Technology In Ship Hydrodynamics. RINA, 2003. http://dx.doi.org/10.3940/rina.cfd.2003.10.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Guilbaud, M., J.-P. Boin, and M. Ba. "Linearised Free Surface Flow Calculations By A Panel Method Using." In CFD 2003: CFD Technology In Ship Hydrodynamics. RINA, 2003. http://dx.doi.org/10.3940/rina.cfd.2003.12.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Pattenden, R. J., S. R. Turnock, and N. W. Bressloff. "Developments In The Use of Large-Eddy Simulation For Ship." In CFD 2003: CFD Technology In Ship Hydrodynamics. RINA, 2003. http://dx.doi.org/10.3940/rina.cfd.2003.11.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Ostman, A., and I. J. Oye. "Rans Solver Applied For Hydrodynamic Analysis of Twin-Hull Ferry." In CFD 2003: CFD Technology In Ship Hydrodynamics. RINA, 2003. http://dx.doi.org/10.3940/rina.cfd.2003.8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "CFD"

1

Apostolatos, A., R. Rossi, and C. Soriano. D7.2 Finalization of "deterministic" verification and validation tests. Scipedia, 2021. http://dx.doi.org/10.23967/exaqute.2021.2.006.

Pełny tekst źródła
Streszczenie:
This deliverable focus on the verification and validation of the solvers of Kratos Multiphysics which are used within ExaQUte. These solvers comprise standard body-fitted approaches and novel embedded approaches for the Computational Fluid Dynamics (CFD) simulations carried out within ExaQUte. Firstly, the standard body-fitted CFD solver is validated on a benchmark problem of high rise building - CAARC benchmark and subsequently the novel embedded CFD solver is verified against the solution of the body-fitted solver. Especially for the novel embedded approach, a workflow is presented on which
Style APA, Harvard, Vancouver, ISO itp.
2

Bhardwaj, M. K., R. K. Kapania, E. Reichenbach, and G. P. Guruswamy. A CFD/CSD interaction methodology for aircraft wings. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/658442.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Lee, S. SDI CFD MODELING ANALYSIS. Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1014152.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Lee, S. TANK48 CFD MODELING ANALYSIS. Office of Scientific and Technical Information (OSTI), 2011. http://dx.doi.org/10.2172/1016386.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Garretson, Dan, Hans Mair, Christopher Martin, Kay Sullivan, and Jeremy Teichman. Review of CFD Capabilities. Defense Technical Information Center, 2005. http://dx.doi.org/10.21236/ada537587.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Chatagny, Laurent. PR-471-16206-R02 Suction Piping Effect on Pump Performance CFD. Pipeline Research Council International, Inc. (PRCI), 2019. http://dx.doi.org/10.55274/r0011562.

Pełny tekst źródła
Streszczenie:
CFD simulations of pump suction piping coupled to a double suction volute pump were performed with oil at a viscosity of ~90 cSt. Two variants of the suction piping were modeled in order to investigate their effect on the pump performance. Measurement data obtained during PRCI project CPR-15A were used to validate the CFD setup. The CFD results were mostly in line with the measurements, in particular performance and pressure tap values in the suction piping. The pump rotor forces predicted by CFD however showed significant differences to the measured values. The CFD setup presented in this rep
Style APA, Harvard, Vancouver, ISO itp.
7

Hawley, Owston, and Thorson. PR-015-13610-R01 Effect of Upstream Piping Configuration on Ultrasonic Meter Bias - Flow Validation. Pipeline Research Council International, Inc. (PRCI), 2014. http://dx.doi.org/10.55274/r0010033.

Pełny tekst źródła
Streszczenie:
This research demonstrated the ability of a Computational Fluid Dynamics (CFD) modeling approach to predict the severity of velocity profile disturbances in two different header configurations with AGA-9 default meter runs. The CFD model was also used to predict the flow measurement error based on the ultrasonic path geometry from four commercially-available ultrasonic flow meters. In addition to the CFD modeling, this project experimentally tested the same two header configurations in a natural gas flow loop. The results from the experimental testing were used to validate the CFD model.
Style APA, Harvard, Vancouver, ISO itp.
8

Tzanos, C. P. Status report : guard containment CFD analysis. Office of Scientific and Technical Information (OSTI), 2006. http://dx.doi.org/10.2172/924681.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Stern, Fred, Robert V. Wilson, Hugh W. Coleman, and Eric G. Paterson. Verification and Validation of CFD Simulations. Defense Technical Information Center, 1999. http://dx.doi.org/10.21236/ada458015.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Carle, A., L. L. Green, P. A. Newman, and C. H. Bischof. Applications of automatic differentiation in CFD. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10159232.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!