Zaloguj się

Gotowe bibliografie tematyczne / Composite beams / Rozprawy doktorskie

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Composite beams.

Rozprawy doktorskie na temat „Composite beams”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 25 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Composite beams”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.

1

Bhutta, Salman Ahmed. "Analytical modeling of hybrid composite beams." Thesis, This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-11102009-020112/.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Megharief, Jihad Dokali. "Behavior of composite castellated beams." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp03/MQ37273.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Molenstra, Nadia Julia. "Ultimate strength of composite beams." Thesis, University of Warwick, 1990. http://wrap.warwick.ac.uk/34713/.

Pełny tekst źródła

Streszczenie:

The study of composite beams is characterised by the connection between the two components: the concrete slab and the steel girder. In this thesis, two different problems, related to this connection were studied: the problem of partial interaction in composite beams of long spans with low degrees of shear connection, and the problem of transverse flexibility of the stud connection 'joint' between the concrete slab and the steel beam as part of a discrete inverted U-frame. This thesis is therefore divided into two separate parts. The study of beams with partial shear connection and solid slabs

Style APA, Harvard, Vancouver, ISO itp.

4

Fan, Chun Keung Roger. "Buckling in continuous composite beams." Thesis, University of Warwick, 1990. http://wrap.warwick.ac.uk/106724/.

Pełny tekst źródła

Streszczenie:

Two aspects of the buckling behaviour of continuous composite beams of steel and concrete are considered. The first part relates to the study of moment redistribution in braced slender beams (Class 3 draft Eurocode 4) due to local buckling in the hogging moment regions. The second part describes the experimental work to investigate the ultimate load behaviour of unbraced compact beams (Classes 1 and 2 draft Eurocode 4) in the hogging moment regions. For a braced continuous slender composite beam, local buckling at an internal support allows a redistribution of bending moment from the hogging r

Style APA, Harvard, Vancouver, ISO itp.

5

Jamal, Dany. "Solution methods of composite beams." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-264913.

Pełny tekst źródła

Streszczenie:

Solutions of composite beams encounter some specific problems, such as shrinkage and creep of concrete, cracking of concrete and plasticity of steel, partial interaction of elements or history of erection and loading process. These factors and others affect the distribution of internal forces along the beam, the distribution of stresses along the cross-section and also stiffness and deflection of beams. The goal is to describe and compare methods for analysis of composite steel and concrete beams by more simplified approaches allowed by Eurocode with more advanced techniques. The studies will

Style APA, Harvard, Vancouver, ISO itp.

6

Do, Nascimento Oliveira Jose Emidio. "Deformation and damage analysis of composite beams equipped with polyvinylidene fluoride film sensors /." [S.l. : s.n.], 2008. http://dk.cput.ac.za/cgi/viewcontent.cgi?article=1001&context=td_cput.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Kong, Yow Wai. "Computer aided design of composite beams." Thesis, McGill University, 1985. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=63364.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Rakib, Saad Namik. "The behaviour of continuous composite beams." Thesis, Cardiff University, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.425983.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

BARROS, LUIS PAULO FRANCO DE. "PIEZOELECTRIC PATCHES MODELING FOR COMPOSITE BEAMS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 1998. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=26509@1.

Pełny tekst źródła

Streszczenie:

COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR<br>Esta dissertação trata da modelagem dos esforços transmitidos por atuadores piezoelétricos, colados ou embutidos em vigas compósitas laminadas. O trabalho é motivado por aplicações na área de materiais e estruturas inteligentes. Em particular, procura-se avaliar o comportamento de diferentes teorias aproximadas nas faixas de médias e altas frequências, quando os comprimentos de onda podem ser da ordem da espessura da viga. Nestes casos, teorias tradicionais de vigas deixam de representar com acuracidade a resposta dinâmica de estr

Style APA, Harvard, Vancouver, ISO itp.

10

Adhikari, Samiran. "High-definition Modeling of Composite Beams." University of Cincinnati / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1627666419572229.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Wang, Qi. "Asymptotic Multiphysics Modeling of Composite Beams." DigitalCommons@USU, 2011. https://digitalcommons.usu.edu/etd/1066.

Pełny tekst źródła

Streszczenie:

A series of composite beam models are constructed for efficient high-fidelity beam analysis based on the variational-asymptotic method (VAM). Without invoking any a priori kinematic assumptions, the original three-dimensional, geometrically nonlinear beam problem is rigorously split into a two-dimensional cross-sectional analysis and a one-dimensional global beam analysis, taking advantage of the geometric small parameter that is an inherent property of the structure. The thermal problem of composite beams is studied first. According to the quasisteady theory of thermoelasticity, two beam mode

Style APA, Harvard, Vancouver, ISO itp.

12

Lam, Wai-yin. "Plate-reinforced composite coupling beams experimental and numerical studies /." Click to view the E-thesis via HKUTO, 2006. http://sunzi.lib.hku.hk/hkuto/record/B37311797.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Dorosh, Mark Norman. "Damage growth in bending of composite beams." Thesis, University of British Columbia, 1988. http://hdl.handle.net/2429/28376.

Pełny tekst źródła

Streszczenie:

A study has been made of glass fibre reinforced plastic beams in three-point bending. In recent years, the importance of flexural loading in composites has manifested itself in the form of composite leaf springs, helicopter rotors, and other applications. This study is directed at the initiation, growth, characterization and measurement of damage in unidirectional and cross-ply composite beams. Beams were tested in three-point static and cyclic bending. Following damage initiation, either by a machined notch or by repeated cycling, damage growth has been characterized by two damage parameters

Style APA, Harvard, Vancouver, ISO itp.

14

Ball, Ryan. "Experimental analysis of composite reinforced concrete beams." Ohio : Ohio University, 1998. http://www.ohiolink.edu/etd/view.cgi?ohiou1177002341.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

Chen, Shiming. "Instability of composite beams in hogging bending." Thesis, University of Warwick, 1992. http://wrap.warwick.ac.uk/4009/.

Pełny tekst źródła

Streszczenie:

This work is concerned with local buckling and lateral distortional buckling, two aspects of instability that govern the design of composite beams in hogging regions. Local buckling in hogging regions of a continuous composite beam was modelled by moment curvature characteristics of a cantilever, modified by two curvature ratios, K1 and K2. Test based expressions for K1 and K2, in terms of a combined slenderness λc, were developed, and subsequently used in numerical analyses of 50 two-span composite beams to assess moment redistribution allowed for Class 2 beams by draft Eurocode 4. The analys

Style APA, Harvard, Vancouver, ISO itp.

16

Wali, Abbas Ahmed Abdul. "The behaviour of semi-continuous composite beams." Thesis, University of Sheffield, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.312777.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Da, Silva Vellasco Pedro Colmar Goncalves. "Local web buckling in tapered composite beams." Thesis, Imperial College London, 1992. http://hdl.handle.net/10044/1/29499.

Pełny tekst źródła

Streszczenie:

Recent demand for very heavily serviced widespan office floors has led, as a natural development of the concept of haunched and tapered frames, to the use of composite flooring systems supported by tapered (varying web depth) beams. These systems are very attractive from an economic point of view, combining wide spans, rapid erection and easy access to services between the shallow parts of the beam and the ceiling below. One of the most pressing needs is for a better understanding of the local buckling behaviour of the relatively deep slender web at changes of slope in the lower flange, in par

Style APA, Harvard, Vancouver, ISO itp.

18

Maheri, M. R. "Vibration damping in composite/honeycomb sandwich beams." Thesis, University of Bristol, 1991. http://hdl.handle.net/1983/d96ba3e9-edb0-4a07-ac6e-69328ed22678.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Senne, Jolyn Louise. "Fatigue Life of Hybrid FRP Composite Beams." Thesis, Virginia Tech, 2000. http://hdl.handle.net/10919/33982.

Pełny tekst źródła

Streszczenie:

As fiber reinforced polymer (FRP) structures find application in highway bridge structures, methodologies for describing their long-term performance under service loading will be a necessity for designers. The designer of FRP bridge structures is faced with out-of-plane damage and delamination at ply interfaces. The damage most often occurs between hybrid plys and dominates the life time response of a thick section FRP structure. The focus of this work is on the performance of the 20.3 cm (8 in) pultruded, hybrid double web I-beam structural shape. Experimental four-point bend fatigue resul

Style APA, Harvard, Vancouver, ISO itp.

20

Derian, Edward J. "Large deformation dynamic bending of composite beams." Thesis, Virginia Tech, 1985. http://hdl.handle.net/10919/45678.

Pełny tekst źródła

Streszczenie:

</p>The large deformation response of composite beams subjected to a dynamic axial load was studied. The beams were loaded with a moderate amount of eccentricity to promote bending. The study was primarily experimental but some finite element results were obtained. Both the deformation and the failure of the beams were of interest. The static response of the beams was also studied in order to determine the difference between the static and dynamic failure. Twelve different laminate types were tested. The beams tested were 23 in. by 2 in. and generally 30 plies thick. The beams were loa

Style APA, Harvard, Vancouver, ISO itp.

21

Abdelnaser, Ahmad Shehadeh. "Random vibrations of composite beams and plates." Diss., Virginia Tech, 1992. http://hdl.handle.net/10919/37691.

Pełny tekst źródła

Streszczenie:

The response characteristics of beams and plates made from composite laminates are strongly affected by the shear deformations of their layers. However, incorporation of the shear deformation further complicates the equations of motion and their analysis. As a result the vibration analysis of such structures have been limited to simple free vibration studies such as determination of their frequencies. The forced vibration problems of these structures have been solved by exact methods for only some very simple cases. In this study, a generalized modal approach is presented to solve more general

Style APA, Harvard, Vancouver, ISO itp.

22

Abdelnaser, Ahmad Shehadeh. "Random vibrations of composite beams and plates /." This resource online, 1993. http://scholar.lib.vt.edu/theses/available/etd-05042006-164514/.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Savic, Vesna. "Design optimization of thin-walled composite beams /." Thesis, Connect to this title online; UW restricted, 2000. http://hdl.handle.net/1773/7036.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Bahadori-Jahromi, Ali. "Development and evaluation of composite insulated beams." Thesis, Edinburgh Napier University, 2006. http://researchrepository.napier.ac.uk/Output/2.

Pełny tekst źródła

Streszczenie:

Decline in supplies of old growth wood coupled with increased demand for structural timber by the construction industry led to creation of engineered timber products (EWPs) comprising wood waste. The author designed, fabricated and tested composite insulated beams (CIBs) which are foam filled sandwich panels constructed from EWPs. CIBs in many cross-sections and materials were limit-tested for structural performance, long-term durability, thermal and dynamic behaviours. Varaiation in material properties was overcome by statistical sorting of beams with different stiffness. Some types of CIB we

Style APA, Harvard, Vancouver, ISO itp.

25

do, Nascimento Oliveira Jose Emidio. "Deformation and damage analysis of composite beams equipped with polyvinylidene fluoride film sensors." Thesis, Cape Peninsula University of Technology, 2008. http://hdl.handle.net/20.500.11838/1284.

Pełny tekst źródła

Streszczenie:

In many engineering applications, it is desirable to know the behaviour of structures and systems under loading conditions. One reason is to help optimize the design and prevent damage and failure which might occur during in service and operation. Damage represents a serious problem which can cause catastrophic failure of structures, machines and systems. Therefore for safe operation, efficient and reliable methods for inspection and monitoring of damage are required. Different methods for health monitoring of structures such as non destructive testing (NDT) and strain gauges are widely used.

Style APA, Harvard, Vancouver, ISO itp.

26

Davis, Richard Anthony. "The Effects of a Damage Arrestment Device on the Mechanical Behavior of Sandwich Composite Beams Under Four-Point Bending." DigitalCommons@CalPoly, 2011. https://digitalcommons.calpoly.edu/theses/506.

Pełny tekst źródła

Streszczenie:

The demand for an insert on composite sandwich structures to aid in the arrestment of face-core delamination is of great need. This research studies the use of a damage arrestment device (DAD) that connects the carbon fiber face sheets to the foam core to find whether an increase in the structural integrity of the sandwich beam results. Experimental analysis was employed to test the samples and was verified by a theoretical and finite element approach. The mechanical properties of LTM45/CF1803 pre-impregnated carbon fiber and Last-A-foam FR 6710 polyvinylchloride foam were experimentally ana

Style APA, Harvard, Vancouver, ISO itp.

27

Dissanayake, Udaya Indrajith. "The influence of the composite beam-to-steel column joint on the behaviour of composite beams in frames." Thesis, University of Sheffield, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.389752.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

Cho, Soon Ho. "Slab behaviour in composite beams at web openings." Thesis, McGill University, 1990. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=74647.

Pełny tekst źródła

Streszczenie:

An explanation is provided for the slab behaviour in composite beams at web holes where the concrete slab carries heavy vertical shear. This is based on the truss concept, and requires consideration of shear studs in the hole region as vertical tension members. According to this, a structural action between the concrete slab and shear connectors for carrying or transferring vertical shear to the steel beam was clearly identified.<br>On the basis of the slab behaviour identified, truss idealizations capable of determining the slab shear carrying capacity in a rational manner were developed. The

Style APA, Harvard, Vancouver, ISO itp.

29

Ata, M. "Torsional analysis of thin-walled fibrous composite beams." Thesis, Cranfield University, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.333145.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

Ho, Teck Tuak. "Analysis of distortional buckling in continuous composite beams." Thesis, University of Nottingham, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.275729.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

31

VIANNA, JULIANA DA CRUZ. "ASSESSMENT OF PERFOBOND CONNECTOR BEHAVIOUR FOR COMPOSITE BEAMS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2009. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=14993@1.

Pełny tekst źródła

Streszczenie:

PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO<br>COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR<br>CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO<br>As vigas mistas são um exemplo das cada vez mais difundidas estruturas mistas, e resultam da associação de uma viga de aço com uma laje de concreto ou mista, ligadas por meio dos conectores de cisalhamento. Dentre os diversos tipos existentes pode-se citar os pernos com cabeça (stud bolts), perfis C e o Perfobond. Um conector alternativo foi proposto para estruturas mistas, o TPerfobond, que deriva do conector Per

Style APA, Harvard, Vancouver, ISO itp.

32

Farley, Gary L. "Energy-absorption capability of composite tubes and beams." Diss., Virginia Polytechnic Institute and State University, 1989. http://hdl.handle.net/10919/54523.

Pełny tekst źródła

Streszczenie:

In this study, the objective was to develop a method of predicting the energy-absorption capability of composite subfloor beam structures. Before it is possible to develop such an analysis capability, an in-depth understanding of the crushing process of composite materials must be achieved. Many variables affect the crushing process of composite structures, such as the constituent materials’ mechanical properties, specimen geometry, and crushing speed. A comprehensive experimental evaluation of tube specimens was conducted to develop insight into how composite structural elements crush and wha

Style APA, Harvard, Vancouver, ISO itp.

33

Yassin, Airil Yasreen Mohd. "The development of precast cold-formed composite beams." Thesis, Imperial College London, 2007. http://hdl.handle.net/10044/1/8054.

Pełny tekst źródła

Streszczenie:

The aim of this project is to develop a new type of composite beam that is light and has high constructability: This is achieved herein with the development of the PCFC beam which consists of a closed cold-formed steel section embedded in concrete. The motivation of the project comes from the availability of cold-formed steel to take any general form, a vital feature as it allows for optimum satisfaction of the composite supply and demand principle. The development of the beam requires several fundamental aspects to be investigated or/and formulated. The first of these is the study of the effe

Style APA, Harvard, Vancouver, ISO itp.

34

An, Wei 1963. "Strengthening of concrete beams with composite plastic plates." Thesis, The University of Arizona, 1990. http://hdl.handle.net/10150/277246.

Pełny tekst źródła

Streszczenie:

This study investigates the feasibility of strengthening reinforced concrete beams with epoxy-bonded Glass-Fiber-Reinforced-Plastic (GFRP) plates. The composite plate is epoxy-bonded to the tension flange of the beam to increase its stiffness and strength. Seven rectangular and one T-beam, retrofitted with composite plates, were tested to failure under symmetrical 4-point bending. The load versus deflection and the load versus strain in the composite plate, steel rebar and the extreme compression fiber of concrete were measured and plotted for the midspan section throughout the entire range of

Style APA, Harvard, Vancouver, ISO itp.

35

Harrison, Christopher. "The detection of delaminations in vibrating composite beams." Thesis, University of Bath, 2000. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.323574.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

Obst, Andreas W. "Nonlinear static and transient analysis of generally laminated beams." Thesis, This resource online, 1991. http://scholar.lib.vt.edu/theses/available/etd-10102009-020113/.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

37

Nagappan, Govindan. "Analysis of composite moving beams using higher order shear deformation theory." Morgantown, W. Va. : [West Virginia University Libraries], 2004. https://etd.wvu.edu/etd/controller.jsp?moduleName=documentdata&jsp%5FetdId=3463.

Pełny tekst źródła

Streszczenie:

Thesis (M.S.)--West Virginia University, 2004.<br>Title from document title page. Document formatted into pages; contains xi, 126 p. : ill. Includes abstract. Includes bibliographical references (p. 123-126).

Style APA, Harvard, Vancouver, ISO itp.

38

Lam, Wai-yin, and 林慧賢. "Plate-reinforced composite coupling beams: experimental and numerical studies." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2006. http://hub.hku.hk/bib/B37311797.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

39

MOUSSA, ALBERT ELIAS. "EFFECTIVE WIDTH AND ULTIMATE STRENGTH OF CONTINUOUS COMPOSITE BEAMS." Diss., The University of Arizona, 1987. http://hdl.handle.net/10150/184084.

Pełny tekst źródła

Streszczenie:

The primary objective of this study has been to examine the behavior of continuous composite beams. The investigation has been based on a nonlinear analysis of 15 composite floor systems. New design criteria have been proposed to calculate the effective width at mid-span and supports, at yield and at ultimate loads. New design equations have been developed to calculate the ultimate strength of a composite section in both positive and negative moment regions. Ductility and deflection characteristics have been studied and equations are proposed to calculate the deflection at service load.

Style APA, Harvard, Vancouver, ISO itp.

40

Lam, Wai-yin, and 林慧賢. "Experimental study on embedded steel plate composite coupling beams." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2003. http://hub.hku.hk/bib/B26643352.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

Heidarpour, Amin Civil &amp Environmental Engineering Faculty of Engineering UNSW. "Behaviour of steel and steel-concrete composite beams and beam-to-column connetions at elevated temperatures." Awarded by:University of New South Wales. Civil & Environmental Engineering, 2007. http://handle.unsw.edu.au/1959.4/40555.

Pełny tekst źródła

Streszczenie:

The current research work investigates the behaviour of steel and composite beams as well as beam-to-column connections at elevated temperatures. Significant attention is needed to identify the main issues. as the behaviour is profoundly different from that at ambient temperature. Local buckling of the beam flange outstands has been found to be highly significant in accelerating the development of catenary action in fire, since this action is reliant on hinges forming which may result from local buckling. Local buckling of the beam web, which experiences a non-uniform temperature variation, i

Style APA, Harvard, Vancouver, ISO itp.

42

Rackham, James William. "The design of haunched composite beam frames for buildings." Thesis, City University London, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.358221.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

Babamohammadi, Sajjad. "Mechanical Assessment of Fiber Reinforced Composite Hollow Circular Beams." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019.

Znajdź pełny tekst źródła

Streszczenie:

This thesis presents a study on fiber reinforced hollow beams. The theoretical background is based on published works and some extensions to the present researches. For some, simple, cases exact solutions are made available, however hollow composite beams have to be studied using 3D modeling in order to capture their actual anisotropic behavior. At first, we start to investigate if we have enough information to successfully design a structure using FRP materials. Then after studying some published works in this field, we understood that there is a lack of some important details. We tried to

Style APA, Harvard, Vancouver, ISO itp.

44

Couchman, Graham H. Couchman Graham. "Design of continuous composite beams allowing for rotation capacity /." Lausanne : EPFL, 1995. http://library.epfl.ch/theses/?nr=1308.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

45

Hicks, Stephen James. "Longitudinal shear resistance of steel and concrete composite beams." Thesis, University of Cambridge, 1997. https://www.repository.cam.ac.uk/handle/1810/252318.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Inniss, Clifton F. "Analytical and experimental modelling of timber-concrete composite beams." Thesis, University of Surrey, 1994. http://epubs.surrey.ac.uk/842780/.

Pełny tekst źródła

Streszczenie:

This thesis investigates the behaviour of timber-concrete composite beams with mechanical shear connectors. The analysis of these structures is complex due to the discontinuity caused by slip at the interface between the timber and concrete and can only be achieved by the use of sophisticated analytical techniques. A literature review has been carried out highlighting the fact that only a limited amount of theoretical and experimental work exists on timber- concrete composite beams. The fundamental objectives of this study were to develop suitable analytical and experimental models so as to be

Style APA, Harvard, Vancouver, ISO itp.

47

Lentz, W. Karl. "Optimum coupling in thin-walled, closed section composite beams." Diss., Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/12018.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

48

Jackson, Rahsean LaNaul. "Vibration and Flexural Strength Characteristics of Composite Castellated Beams." Thesis, Virginia Tech, 2002. http://hdl.handle.net/10919/31242.

Pełny tekst źródła

Streszczenie:

With the development of lightweight concrete and design optimizations, floor vibration problems are becoming a serious serviceability problem. The castellated beam is a prime example and was the focus of this study. The vibration and flexural strength performance were verified in this paper. <p> The vibration characteristics of castellated beams were examined using experimental and analytical test methods. The effective moment of inertia is essential to accurately predict the frequency and deflection of a floor system due to human occupancy. Since castellated beams have non-prismatic cross-se

Style APA, Harvard, Vancouver, ISO itp.

49

Kim, Seunghwan. "Creep and Shrinkage Effects on Steel-Concrete Composite Beams." Thesis, Virginia Tech, 2014. http://hdl.handle.net/10919/48427.

Pełny tekst źródła

Streszczenie:

Predicting the long-term behavior of steel-concrete composite structures is a very complex systems problem, both because obtaining reliable information on material properties related to creep and shrinkage is not straightforward and because it is not easy to clearly determine the correlation between the effects of creep and shrinkage and the resultant structural response. Slip occurring at the interface between the steel and concrete may also make prediction more complicated. While the short-term deflection of composite beams may be easily predicted from fundamental theories of structural mech

Style APA, Harvard, Vancouver, ISO itp.

50

Allen, Aaron Andrew. "Stability results for damped multilayer composite beams and plates." [Ames, Iowa : Iowa State University], 2009.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!