Zaloguj się

Gotowe bibliografie tematyczne / Computer-aided engineering / Rozprawy doktorskie

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Computer-aided engineering.

Rozprawy doktorskie na temat „Computer-aided engineering”

Autor: Grafiati

Data publikacji: 4 czerwca 2021

Data aktualizacji: 25 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Computer-aided engineering”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.

1

Akbary-Safa, Mahnaz. "Computer aided inspection in engineering manufacture." Thesis, Imperial College London, 1992. http://hdl.handle.net/10044/1/8346.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Sivaloganathan, Sangarappillai. "Sketching input for computer aided engineering." Thesis, City University London, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.292733.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Shahdad, Mir Abubakr. "Engineering innovation (TRIZ based computer aided innovation)." Thesis, University of Plymouth, 2015. http://hdl.handle.net/10026.1/3317.

Pełny tekst źródła

Streszczenie:

This thesis describes the approach and results of the research to create a TRIZ based computer aided innovation tools (AEGIS and Design for Wow). This research has mainly been based around two tools created under this research: called AEGIS (Accelerated Evolutionary Graphics Interface System), and Design for Wow. Both of these tools are discussed in this thesis in detail, along with the test data, design methodology, test cases, and research. Design for Wow (http://www.designforwow.com) is an attempt to summarize the successful inventions/ designs from all over the world on a web portal which

Style APA, Harvard, Vancouver, ISO itp.

4

CAMPANELLA, Davide. "COMPUTER AIDED ENGINEERING OF SOLID BONDING PHENOMENA." Doctoral thesis, Università degli Studi di Palermo, 2014. http://hdl.handle.net/10447/95507.

Pełny tekst źródła

Streszczenie:

Joining is a fundamental technological process in manufacturing used to create a single piece from two or more parts. Welding is still today one of the most popular joining techniques used in manufacturing allowing a permanent junction. Traditional welding processes are based on the melting of the materials to be joined. In this way, several defects may arise because of solidification problems, joints deformation due to elevated residual stress and metallurgical integrity of the joints (intermetallic, porosities, etc). As an example, some aluminum alloys present considerable prob

Style APA, Harvard, Vancouver, ISO itp.

5

Song, Guangming. "An application of computer aided design and computer aided draughting techniques to gearing." Thesis, City, University of London, 1988. http://openaccess.city.ac.uk/19505/.

Pełny tekst źródła

Streszczenie:

The thesis describes the development of a computer-aided design and computer-aided draughting package of industrial gearboxes for transmitting power between shafts having parallel major axes. The package mainly consists of the following functions: (a) Determination of gear tooth numbers from the properties of continued and conjugate fractions (b) Generation of gear teeth by a rack-type cutter (c) Calculation of gear tooth profile and production of gear tooth grid for finite element stress analysis (d) Detailed strength analysis and design of a spur or helical, external or internal, standard or

Style APA, Harvard, Vancouver, ISO itp.

6

Le, Gal Thierry. "Re-engineering software for integration using computer aided software engineering." Thesis, This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-06232009-063016/.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Panton, Stephen M. "Computer aided form roll design." Thesis, Aston University, 1987. http://publications.aston.ac.uk/11928/.

Pełny tekst źródła

Streszczenie:

Cold roll forming is an extremely important but little studied sheet metal forming process. In this thesis, the process of cold roll forming is introduced and it is seen that form roll design is central to the cold roll forming process. The conventional design and manufacture of form rolls is discussed and it is observed that surrounding the design process are a number of activities which although peripheral are time consuming and a possible source of error. A CAD/CAM system is described which alleviates many of the problems traditional to form roll design. New techniques for the calculation o

Style APA, Harvard, Vancouver, ISO itp.

8

Cevheri, Necmettin. "Computer Aided Engineering Of An Unmanned Underwater Vehicle." Master's thesis, METU, 2009. http://etd.lib.metu.edu.tr/upload/2/12610754/index.pdf.

Pełny tekst źródła

Streszczenie:

Hydrodynamic and thermal analyses performed during the conceptual design of an unmanned underwater vehicle are presented in this study. The hull shape is determined by considering alternative shapes and the dimensions are determined from the internal arrangement of components. Preliminary thermal analyses of the watertight section are performed with a commercial software called FLUENT to check the risk of over-heating due to the heat dissipation of devices. Performance of the proposed hull design is analyzed by FLUENT. Before simulations of the vehicle, validation studies are performed. Models

Style APA, Harvard, Vancouver, ISO itp.

9

Zullo, Luca Costantino. "Computer aided design of experiments : an engineering approach." Thesis, Imperial College London, 1991. http://hdl.handle.net/10044/1/8323.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Oltikar, Akhil Manohar. "Computer-Aided Engineering of Plywood Upholstered Furniture Frames." NCSU, 2001. http://www.lib.ncsu.edu/theses/available/etd-20001221-130641.

Pełny tekst źródła

Streszczenie:

<p>Until the early 1900s, furniture was built by hand, one piece at a time. The industrial revolution and modern manufacturing technology has changed all of that. Today, as the furniture industry moves firmly into the next century, computerized systems and automated manufacturing have become more common to the industry. This thesis represents an effort to analyze the current practices in computer-aided design of upholstered furniture, specifically plywood frame furniture, and to develop new procedures for reducing the lead-time in upholstery product development. Different 3-D modeling techniqu

Style APA, Harvard, Vancouver, ISO itp.

11

Altenhof, Jeffrey L. "Computer-aided concurrent engineering in refrigeration system design." Master's thesis, This resource online, 1990. http://scholar.lib.vt.edu/theses/available/etd-01262010-020010/.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Hatchell, Brian. "Data base design for integrated computer-aided engineering." Thesis, Georgia Institute of Technology, 1987. http://hdl.handle.net/1853/16744.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Gabbay, Lynn Daniel. "Computer aided macromodeling for MEMS." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/9955.

Pełny tekst źródła

Streszczenie:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1998.<br>Includes bibliographical references (p. 85-87).<br>by Lynn Daniel Gabbay.<br>Ph.D.

Style APA, Harvard, Vancouver, ISO itp.

14

Ong, Chee Fatt. "Computer-aided design of tension structures." Thesis, City University London, 1992. http://openaccess.city.ac.uk/7994/.

Pełny tekst źródła

Streszczenie:

This thesis consists of three parts. Part I (chapters 1-4) gives a review and description of the basis for the numerical modelling of tension structures. The discussion in Part I leads to the conclusion of a need for an interactive design procedure for tension structures which is the subject under consideration in Part II (chapters 5-7). In the design of tension structures, an area which requires special attention is the dynamic response often initiated by the action of a natural wind. In Part III (chapters 8 and 9), this area is examined in detail and a strategy is proposed to give an improve

Style APA, Harvard, Vancouver, ISO itp.

15

Patil, Dilip Madhusudan. "Feature based computer aided process planning." Thesis, University of Warwick, 1995. http://wrap.warwick.ac.uk/110865/.

Pełny tekst źródła

Streszczenie:

This research attempts to study, plan and develop an integrated feature based CAPP system that generates automated process plans for machining prismatic components. The CAPP system comprises a STEP compliant feature based commercial CAD system and the Smalltalk object oriented system. A library of features has been developed that is based on STEP based form feature taxonomy but modified to communicate the manufacturing intent and feature aggregation. The CAPP system has been developed to represent the product, process and resource domain knowledge with a number of object hierarchies, communica

Style APA, Harvard, Vancouver, ISO itp.

16

Varma, Ambrish Kant. "COMPUTER AIDED TOOLSFORSEAMLESS HIGH DENSITY INTERCONNECTS." NCSU, 2001. http://www.lib.ncsu.edu/theses/available/etd-20010410-171850.

Pełny tekst źródła

Streszczenie:

<p><B>Varma, Ambrish Kant. Computer - Aided Tools for Seamless High DensityInterconnects. (Under the direction of Paul D. Franzon)</B><BR>This thesis presents the tool-set designed to demonstrate the possibility of using theCadence tools to design, verify and extract circuitry on the substrate along with theon-chip design. This circuitry could be an inter-chip connection that connects twodifferent chips or an intra-chip connection where a long interconnect is taken off fromthe active area of the chip to the substrate and back on to the same chip.<BR>To be able to do this task, the work for thi

Style APA, Harvard, Vancouver, ISO itp.

17

Kyratzoglou, I. M. (Ioannis M. ). "Computer aided design for Petri Nets." Thesis, Massachusetts Institute of Technology, 1987. http://hdl.handle.net/1721.1/14669.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Mavrovouniotis, Michael L. (Michael Loizos). "Computer-aided design of biochemical pathways." Thesis, Massachusetts Institute of Technology, 1988. http://hdl.handle.net/1721.1/14449.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Tanga, Rajan M. "Computer aided software engineering tool for generating C code." Ohio : Ohio University, 1988. http://www.ohiolink.edu/etd/view.cgi?ohiou1182872759.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

Varsamidis, Thomas. "Object-oriented information modelling for computer-aided control engineering." Thesis, Bangor University, 1998. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.245177.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Hoyer, Markus. "Catalogue based computer aided engineering (CAE) of process models." Thesis, University of South Wales, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.441212.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

Chow, Yi-Mei Maria 1974. "Computer-aided engineering methodology for structural optimization and control." Thesis, Massachusetts Institute of Technology, 2000. http://hdl.handle.net/1721.1/80921.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

23

Pensulo, Emilius M. "Integrating computer aided engineering functions: the management of information." Thesis, Aston University, 1987. http://publications.aston.ac.uk/11853/.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

24

Ilango, Sankaralingam. "Computer-aided underground mining machine sequencing." Ohio : Ohio University, 1987. http://www.ohiolink.edu/etd/view.cgi?ohiou1183047349.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

25

Kitano, Akira. "A prototype computer-aided assembly planning system." Thesis, Massachusetts Institute of Technology, 1990. http://hdl.handle.net/1721.1/14059.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

26

Critz, David Karl. "Computer aided fatigue life prediction for polymers." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/10489.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

27

Rosen, Jacob (Jacob Benjamin). "Computer aided tax avoidance policy analysis." Thesis, Massachusetts Institute of Technology, 2015. http://hdl.handle.net/1721.1/98541.

Pełny tekst źródła

Streszczenie:

Thesis: S.M. in Technology and Policy, Massachusetts Institute of Technology, Engineering Systems Division, Technology and Policy Program, 2015.<br>This electronic version was submitted by the student author. The certified thesis is available in the Institute Archives and Special Collections.<br>Cataloged from student-submitted PDF version of thesis.<br>Title as it appears in MIT Commencement Exercises program, June 5, 2015: Computer aided tax evasion policy analysis: partnership calculation. Includes bibliographical references (pages 81-83).<br>his thesis presents a three part methodology fo

Style APA, Harvard, Vancouver, ISO itp.

28

Irwin, Dennis M. "Re-engineering of the computer-aided prototyping system for portability." Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1996. http://handle.dtic.mil/100.2/ADA322566.

Pełny tekst źródła

Streszczenie:

Thesis (M.S. in Computer Science) Naval Postgraduate School, September 1996.<br>"September 1996." Thesis advisor(s): Luqi and Valdis Berzins. Includes bibliographical references (p. 35-37). Also Available online.

Style APA, Harvard, Vancouver, ISO itp.

29

Yetkin, Recep Erdinc Enriquez Sotero. "Re-engineering portabililty of the Computer Aided Prototyping System (CAPS) /." Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1997. http://handle.dtic.mil/100.2/ADA333411.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

30

Bérard, Adrien. "Method Development for Computer Aided Engineering for Aircraft Conceptual Design." Licentiate thesis, KTH, Aeronautical and Vehicle Engineering, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-9240.

Pełny tekst źródła

Streszczenie:

<p>This thesis presents the work done to implement new computational tools and methods dedicated to aircraft conceptual design sizing and optimization. These tools have been exercised on different aircraft concepts in order to validate them and assess their relevance and applicability to practical cases.First, a geometry construction protocol has been developed. It is indeed essential to have a geometry description that supports the derivation of all discretizations and idealizations used by the different analysis modules (aerodynamics, weights and balance, stability and control, etc.) for whi

Style APA, Harvard, Vancouver, ISO itp.

31

Ladner, Amy Lynn. "FREE-FORM DEFORMATION FOR COMPUTER-AIDED ENGINEERING ANALYSIS AND DESIGN." MSSTATE, 2007. http://sun.library.msstate.edu/ETD-db/theses/available/etd-07022007-131403/.

Pełny tekst źródła

Streszczenie:

Toward support of the use of geometry in advanced simulation, a free-form deformation (FFD) tool was designed, developed, and tested using object oriented (OO) techniques. The motivation for creating this FFD tool in-house was to provide engineers and researchers a cost efficient, quick, and easy way to computationally manipulate models without having to start from scratch while readily seeing the resulting geometry. The FFD tool was built using the OO scripting language, Python, the OO GUI toolkit, Qt, and the graphics toolkit, OpenGL. The tool produced robust and intuitive results for two-di

Style APA, Harvard, Vancouver, ISO itp.

32

Yetkin, Recep Erdinc, and Sotero Enriquez. "Re-engineering portabililty of the Computer Aided Prototyping System (CAPS)." Monterey, California. Naval Postgraduate School, 1997. http://hdl.handle.net/10945/8897.

Pełny tekst źródła

Streszczenie:

Approved for public release; distribution is unlimited<br>The Computer-Aided Prototyping System (CAPS) currently runs only on SPARC workstations ruling SunOS version 4.1.3. This limits the usefulness of CAPS, since Sun Microsystems has publicly announced that they have no interest in continuing support for SunOS version 4.x. A solution to this problem is to port CAPS to a PC platform running the Linux operating system. Towards this end, the graphical editor portion of CAPS was ported onto a 100Mhz Pentium, with 32 MB of RAM, Linux 3.0, running Motif 2.0 on X windows. Modifications to both, the

Style APA, Harvard, Vancouver, ISO itp.

33

Manley, Gary W. "The classification and evaluation of Computer-Aided Software Engineering tools." Thesis, Monterey, California: Naval Postgraduate School, 1990. http://hdl.handle.net/10945/34910.

Pełny tekst źródła

Streszczenie:

Approved for public release; distribution unlimited.<br>The use of Computer-Aided Software Engineering (CASE) tools has been viewed as a remedy for the software development crisis by achieving improved productivity and system quality via the automation of all or part of the software engineering process. The proliferation and tremendous variety of tools available have stretched the understanding of experienced practitioners and has had a profound impact on the software engineering process itself. To understand what a tool does and compare it to similar tools is a formidable task given the exist

Style APA, Harvard, Vancouver, ISO itp.

34

Virk, Gurmej Singh. "A computer-aided learning and design system for control engineering." Thesis, University of Sheffield, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.364270.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

35

Gavin, Carl Jospeh. "The application of Computer-Aided Software Engineering within manufacturing industry." Thesis, University of Liverpool, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.241486.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

Blake, Etoile Saint-Melson. "Computer aided techniques for the reliability assessment of engineering systems." Thesis, London South Bank University, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.279708.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

37

Potgieter, L. "Circuit tutor : a computer-aided learning package for electrical engineering." Master's thesis, University of Cape Town, 1989. http://hdl.handle.net/11427/23322.

Pełny tekst źródła

Streszczenie:

The development of Circuit Tutor, the subject of this dissertation, resulted from a conviction that computers can further enrich the Electronic Engineering curriculum. After an investigation into the different roles of the computer in education the use of modelling and simulation was selected as an effective Computer Aided Learning method. It was realised that the development of any non-trivial simulation program is however not an easy task. The programmer must not only model the circuit behaviour, but also write the man-machine interface (MMI). The main goal of Circuit Tutor was to provide a

Style APA, Harvard, Vancouver, ISO itp.

38

Bérard, Adrien. "Method development for computer aided engineering for aircraft conceptual design /." Stockholm : School of Engineering Sciences, Kungliga Tekniska högskolan, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-9240.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

39

Mehta, Bhavin V. "Computer aided design of streamlined dies." Ohio : Ohio University, 1988. http://www.ohiolink.edu/etd/view.cgi?ohiou1182867408.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

40

Kang, Yuezhuang. "Computer-aided fixture design verification." Link to electronic thesis, 2002. http://www.wpi.edu/Pubs/ETD/Available/etd-0108102-163543.

Pełny tekst źródła

Streszczenie:

Thesis (M.S.)--Worcester Polytechnic Institute.<br>Keywords: Fixture stiffness matrix; Jacobian matrix; kinetic model; geometric model; fixture design verification; stability analysis; tolerance analysis; tolerance assignment. Includes bibliographical references (p. 92-97).

Style APA, Harvard, Vancouver, ISO itp.

41

Magill, W. R. "A generative Computer Aided Process Planning system." Thesis, University of Newcastle Upon Tyne, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.328585.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

42

Nakamura, Takatoshi. "A computer-aided system for space welding." Thesis, Massachusetts Institute of Technology, 1994. http://hdl.handle.net/1721.1/38350.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

43

Chen, Weng-Jen. "Manufacturing information for engineering design." Thesis, University of Cambridge, 1998. https://www.repository.cam.ac.uk/handle/1810/272428.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

44

Amin, Nada. "Computer-aided design for multilayer microfluidic chips." Thesis, Massachusetts Institute of Technology, 2009. http://hdl.handle.net/1721.1/53122.

Pełny tekst źródła

Streszczenie:

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2009.<br>Includes bibliographical references (leaves 63-66).<br>Microfluidic chips fabricated by multilayer soft lithography are emerging as "lab-on-a-chip" systems that can automate biological experiments. As we are able to build more complex microfluidic chips with thousands of components, it becomes possible to build devices which can be programmatically changed to solve multiple problems. However, the current design methodology does not scale. In this thesis, we introduce design a

Style APA, Harvard, Vancouver, ISO itp.

45

Heng, Fock Lee. "Computer-aided analysis and design for extrusion dies." Thesis, University of Ottawa (Canada), 1987. http://hdl.handle.net/10393/5444.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

46

Lord, Patrick Jean. "Computer aided intertrochanteric osteotomy planning and surgery simulation." Thesis, Massachusetts Institute of Technology, 1994. http://hdl.handle.net/1721.1/33814.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

47

Chen, Jie Ph D. Massachusetts Institute of Technology. "Computer-aided rational solvent selection for pharmaceutical crystallization." Thesis, Massachusetts Institute of Technology, 2010. http://hdl.handle.net/1721.1/59874.

Pełny tekst źródła

Streszczenie:

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Chemical Engineering, 2010.<br>Cataloged from PDF version of thesis.<br>Includes bibliographical references (p. 131-135).<br>Solvents play an important role in crystallization, a commonly used separation and purification technique in the pharmaceutical, chemical and food industries. They affect crystal properties such as particle size distribution, morphology, polymorphism etc. and therefore have consequences for the downstream processing of the solid material. Current solvent selection techniques for solution crystallization rem

Style APA, Harvard, Vancouver, ISO itp.

48

Perez, Jose L. (Jose Luiz). "Computer-aided thermodynamics modeling of a pure substance." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/35036.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

49

Davies, Daniel. "Representation of multiple engineering viewpoints in Computer Aided Design through computer-interpretable descriptive markup." Thesis, University of Bath, 2008. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.488893.

Pełny tekst źródła

Streszczenie:

The aim of this work was to find a way of representing multiple interpretations of a product design with the same CAD model and in a way that allowed reduction of the manual work of producing the viewpoint specific models of the product through automation The approach presented is the recording of multiple viewpoint-interpretations of a product design with a CAD product model using descriptive, by-reference (stand-off) computer interpretable markup of the model.

Style APA, Harvard, Vancouver, ISO itp.

50

Coxon, Andrew. "Computer aided analysis of paraspinal electromyography." Thesis, Teesside University, 2013. http://hdl.handle.net/10149/301616.

Pełny tekst źródła

Streszczenie:

Back pain is responsible for British employees taking 5 million sick days per year. Low back pain (LBP) has a controversial aetiology, with 95% of cases caused by mechanical, non-pathological causes. Current medical treatment for mechanical LBP is an exercise regime designed to restore lumbar stability. Unfortunately this is often a painful process, and therefore difficult to complete. Electromyography (EMG) variables have been shown to be able to discriminate between subjects with and without mechanical LBP. If these variables could be shown to have discriminatory abilities before the actual

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!