Gotowe bibliografie tematyczne / Eco-Manufacturing

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Eco-Manufacturing”

Autor: Grafiati
Data publikacji: 5 października 2024
Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Eco-Manufacturing”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Eco-Manufacturing"

1

Dimitrov, Roumen. "Promoting eco manufacturing: an Australian case." Journal of Public Affairs 8, no. 4 (2008): 233–47. http://dx.doi.org/10.1002/pa.298.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Meutia, Inten, Marini Ramadhani, and Mohamad Adam. "Does Eco-Efficiency Improve Financial Performance of Manufacturing Companies in Indonesia?" Jurnal Dinamika Akuntansi dan Bisnis 6, no. 2 (2019): 137–50. http://dx.doi.org/10.24815/jdab.v6i2.13785.

Pełny tekst źródła
Streszczenie:
This study aims to determine the impact of environmental performance proxied by eco-efficiency on the financial performance of manufacturing companies in Indonesia. İn this study, the multiple linear regression test was used to analyse the data. The sample of this study is manufacturing companies that listed at the Indonesia Stock Exchange from 2012 until 2016 with the total observation is 80 firm-years.The results of this study indicated that the average level of eco-efficiency of the manufacturing companies is still relatively low (0.38). The environmental performance as measured by the eco-
Style APA, Harvard, Vancouver, ISO itp.
3

Singhal, Tejendra Singh, Jinesh Kumar Jain, D. Atchuta Ramacharyulu, et al. "Eco-Design of Products and Processes: A Review on Principles and Tools for Sustainable Manufacturing." E3S Web of Conferences 505 (2024): 01033. http://dx.doi.org/10.1051/e3sconf/202450501033.

Pełny tekst źródła
Streszczenie:
Eco-design is a crucial approach in achieving sustainable manufacturing, which seeks to reduce the environmental impact of products and processes throughout their lifecycle. This paper explores the principles and tools that are used in eco-design, providing an overview of the key concepts and methods for sustainable manufacturing. The principles of eco-design are centered on minimizing the environmental impact of products and processes through the use of renewable resources, reducing waste and emissions, and improving energy and material efficiency. The paper discusses these principles in deta
Style APA, Harvard, Vancouver, ISO itp.
4

Zulkiffli, Siti Nur ‘Atikah, Nur Farah Zafira Zaidi, Siti Falindah Padlee, and Najahul Kamilah Aminy Sukri. "Eco-Innovation Capabilities and Sustainable Business Performance during the COVID-19 Pandemic." Sustainability 14, no. 13 (2022): 7525. http://dx.doi.org/10.3390/su14137525.

Pełny tekst źródła
Streszczenie:
The COVID-19 pandemic has had a direct impact on the manufacturing industry in Malaysia because all economic activities had to be suspended for some time. This study explores the role that eco-innovation capabilities might play in improving sustainable business performance during the ongoing pandemic. This study employs a quantitative method by distributing online questionnaires to 80 small and medium enterprises (SMEs) in Klang Valley, Malaysia. In the study, the relationship between sustainable business performance and the three variables of eco-innovation capabilities, i.e., eco-product inn
Style APA, Harvard, Vancouver, ISO itp.
5

Yang, Qin, and Lin Sun. "Eco-Design in Manufacturing or Remanufacturing? The Sustainable Options in a Closed-Loop Supply Chain with Outsourcing." Sustainability 16, no. 4 (2024): 1633. http://dx.doi.org/10.3390/su16041633.

Pełny tekst źródła
Streszczenie:
Here, the authors focused on determining the increase in consumers’ preferences for sustainable products, including that of OEMs, who are responsible for the drop in new product sales. We also assessed the effects of remanufacturing by outsourcing to third-party remanufacturers. However, the outsourcing of remanufacturing not only enables the producer to offer a remanufactured product at the same time as manufacturing new units; it also provides OEMs with the flexibility required to peruse eco-design in manufacturing and/or remanufacturing. For instance, Gree and Midea have heavily invested in
Style APA, Harvard, Vancouver, ISO itp.
6

Khan, Noor Ullah, Ateeq-ur-Rehman Irshad, Adeel Ahmed, and Amira Khattak. "Do organizational citizenship behavior for the environment predict triple bottom line performance in manufacturing firms?" Business Process Management Journal 27, no. 4 (2021): 1033–53. http://dx.doi.org/10.1108/bpmj-01-2021-0007.

Pełny tekst źródła
Streszczenie:
PurposeOrganizational citizenship behavior for the environment (OCBE) is vital for manufacturing firms' ability to improve their triple bottom line (TBL) performance. This study's objective was to examine the direct relationship between three OCBE key dimensions, i.e. eco-initiatives (EIs), eco-civic-initiatives and eco-helping (EH) and TBL performance, i.e. economic (ECOP), social (SOP) and environmental (ENP).Design/methodology/approachThe quantitative design was used based on the positivist approach. A sample of 350 manufacturing firms was targeted using random probability sampling via a su
Style APA, Harvard, Vancouver, ISO itp.
7

Abdullah, Ziyad Tariq, Guo Shunsheng, and Sheng Buyun. "Eco-Design Application to Drive Sustainable Manufacturing." Advanced Science Letters 21, no. 12 (2015): 3610–14. http://dx.doi.org/10.1166/asl.2015.6561.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Sun, Mei, Ying Ru, Chun Xiao Li, and Yong Chao Sun. "Proposal of Eco Design for Chinese Manufacturing." Applied Mechanics and Materials 496-500 (January 2014): 2707–10. http://dx.doi.org/10.4028/www.scientific.net/amm.496-500.2707.

Pełny tekst źródła
Streszczenie:
Export value took more than half of GDP in average from 2007 to 2011. In recent years, Nations issued a large amount of environment standards; as a result, Chinese exported products suffered recall in main target nation of export because product did not meet requirement of eco-design. In China, small and medium-sized enterprises took more than half of total enterprise in manufacturing. For small and medium-sized enterprises, it is difficult to know well about all environment standards in world. This paper draw proposal for the development of Chinese manufacturing.
Style APA, Harvard, Vancouver, ISO itp.
9

Gutowski, Timothy G. "The efficiency and eco-efficiency of manufacturing." International Journal of Nanomanufacturing 6, no. 1/2/3/4 (2010): 38. http://dx.doi.org/10.1504/ijnm.2010.034770.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Horta, J. F., F. J. P. Simões, and A. Mateus. "Large scale additive manufacturing of eco-composites." International Journal of Material Forming 11, no. 3 (2017): 375–80. http://dx.doi.org/10.1007/s12289-017-1364-5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Eco-Manufacturing"

1

Litos, Lampros. "Design support for eco-efficiency improvements in manufacturing." Thesis, University of Cambridge, 2016. https://www.repository.cam.ac.uk/handle/1810/264946.

Pełny tekst źródła
Streszczenie:
Eco-efficiency improvements in manufacturing is a controversial subject for researchers, practitioners as well as policy makers. The widely accepted definition of "doing more with less" is not accurate enough to guide the design of improvements that can deliver products in a sustainable way. The outcome of these challenges is evident through significant environmental performance variations across various levels of manufacturing operations. The study is driven by the complexity of manufacturing systems and sought to offer design support for practitioners that aim to improve eco-efficiency. A ma
Style APA, Harvard, Vancouver, ISO itp.
2

Jansson, Christoffer, and Catrin Carlberg. "Barriers to Eco-innovation : A Qualitative Study on Large Manufacturing Companies." Thesis, Uppsala universitet, Företagsekonomiska institutionen, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-388461.

Pełny tekst źródła
Streszczenie:
Over the last decades the concept of eco-innovation has increased its relevance among academics, practitioners and policy makers. The majority of prior literature has concerned eco-innovations and their drivers. Research concerning the barriers to eco-innovation is however scarce, especially among large companies. The purpose with this thesis is therefore to extract further information regarding the field of the barriers to eco-innovation. The aim is to contribute with enhanced knowledge and expand the current literature, as focus is placed on large companies and their barriers. This has been
Style APA, Harvard, Vancouver, ISO itp.
3

Cook, Matthew Brian. "The transfer and application of the eco-service concept in UK manufacturing companies : an exploratory study." Thesis, Cranfield University, 2002. http://dspace.lib.cranfield.ac.uk/handle/1826/10570.

Pełny tekst źródła
Streszczenie:
Increasingly, services are utilised by manufacturing companies to satisfy demand. This trend is thought by a number of authors to provide opportunities to develop products that satisfy demand at increased resource efficiencies. This thesis considers a special category of services which have been conceptualised by academics and policy makers to realise this - Eco-services Eco-services have been the focus of a number of research projects lead by those practicing and associated with cleaner product design. This work has mainly focused on product policy and whilst a considerable body of knowledge
Style APA, Harvard, Vancouver, ISO itp.
4

Bloch, Pierre-Yves. "Industrialisation de la production d'une innovation technologique avec un potentiel gain environnemental important : application aux cellules bio-enzymatiques." Electronic Thesis or Diss., Université Grenoble Alpes, 2024. http://www.theses.fr/2024GRALI039.

Pełny tekst źródła
Streszczenie:
L'industrialisation d'un produit de rupture dans le contexte spécifique d'une startup Deeptech est difficile, stressante et risquée. Elle nécessite un processus bien structuré, aligné sur la R&D du produit et le développement des procédés, le développement de la startup elle-même, et le développement ou l'adaptation d'outils et de méthodes spécifiques. Cette thèse aborde la question de l'industrialisation et de la mise à l'échelle de la production d'un produit innovant avec des objectifs de durabilité ambitieux. Une startup se distingue par ses ressources limitées qui se développent rapide
Style APA, Harvard, Vancouver, ISO itp.
5

Lennan, Maria Laura Ferranty Mac. "Determinantes estratégicos de ecoeficiências de empresas chinesas no Brasil." Universidade de São Paulo, 2016. http://www.teses.usp.br/teses/disponiveis/12/12139/tde-03022017-104308/.

Pełny tekst źródła
Streszczenie:
Preocupações com sustentabilidade ambiental são recorrentes tanto no meio acadêmico, como no meio empresarial. Elas ecoam ao se pensar no crescimento econômico chinês e nos impactos das atividades produtivas no meio ambiente. A China é o país emergente com as maiores taxas de crescimento econômico no mundo, porém sua imagem também reflete sua vulnerabilidade com relação à ecologia. Tendo isso em consideração e procurando compreender como isso repercute nas operações internacionais, esta tese estuda os determinantes estratégicos das empresas chinesas em operação no Brasil, pelas lentes teóricas
Style APA, Harvard, Vancouver, ISO itp.
6

Endresen, Fredrik Vihovde. "Electric Motor Development for Shell Eco-Marathon : Manufacturing an ironless axial flux permanent magnet Motor with Hallbach array and Development of existing Motor for the Shell Eco-Marathon Competition." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for elkraftteknikk, 2012. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-19021.

Pełny tekst źródła
Streszczenie:
This thesis describes the process of making a new engine for the car DNV Fuel Fighter 2 that participated in the Shell Eco-Marathon Europe 2012 in Rotterdam. The decision was made to construct a new engine based on an optimized design by Lubna Nasrin. The engine is an ironless axial flux permanent magnet machine with Hallbach array. As a contingency plan there was the possibility to modify the engine used in 2010 and 2011 built by André Dahl-Jacobsen. The result of the process is that the new engine is operational and it has displayed an efficiency of 68 %. However the old engine has disp
Style APA, Harvard, Vancouver, ISO itp.
7

Woolman, Tim. "Eco-product innovation and clean manufacturing technologies : designing support services for small and medium sized enterprises : innovation report." Thesis, University of Warwick, 2011. http://wrap.warwick.ac.uk/42210/.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Yi, Li [Verfasser], Jan C. [Akademischer Betreuer] Aurich, and Bahram [Akademischer Betreuer] Ravani. "Eco-Design for Additive Manufacturing Using Energy Performance Quantification and Assessment / Li Yi ; Jan C. Aurich, Bahram Ravani." Kaiserslautern : Technische Universität Kaiserslautern, 2021. http://d-nb.info/1238074480/34.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

BATTISTONI, CHIARA. "Systemic Design for local circular economies: designing ecosystems to boost systemic innovation in the manufacturing sector. From the theoretical framework to the practical application." Doctoral thesis, Politecnico di Torino, 2020. http://hdl.handle.net/11583/2861332.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Nanto, Darack B. "THE ECO-SMART CAN V2.0." Digital Commons @ East Tennessee State University, 2018. https://dc.etsu.edu/asrf/2018/schedule/39.

Pełny tekst źródła
Streszczenie:
I noticed that the workers had the same itinerary when emptying trashcans, meanwhile trashcans needed urgently to be emptied. Traditionally, ETSU maintenance operate on daily routes to pick trash on designated time, regardless the level of the containers. This leads to overflown trashcan in busy areas or during rush hours in certain areas. This overflown trashcan result in an unclean environment for the community and an unpleasant look of our beautiful campus. The time, resources and labor invested in collecting the trash could be saved. Therefore, I decided to use the Internet of Things (IoT)
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Eco-Manufacturing"

1

Schmidt, Christopher. Planning of Eco-efficient Process Chains for Automotive Component Manufacturing. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-62953-3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Schmidt, Christopher. Planning of Eco-efficient Process Chains for Automotive Component Manufacturing. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-65890-8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Ambs, Pierre. SPIE eco-photonics 2011: Sustainable design, manufacturing, and engineering workforce education for a green future : 28-30 March 2011, Strasbourg, France. Edited by SPIE (Society). SPIE, 2011.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

International Seminar on Life Cycle Engineering (3rd 1996 Zürich, Switzerland). ECO-performance '96: Presentations at the 3rd International Seminar on Life Cycle Engineering : ETH Zürich, Switzerland, March 18-20, 1996. Verlag Industrielle Organisation, 1996.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Rothery, Brian. BS 7750: Implementing the Environment Management Standard and the EC Eco-Management Scheme. Gower, 1993.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Schmidt, Christopher. Planning of Eco-Efficient Process Chains for Automotive Component Manufacturing. Springer International Publishing AG, 2022.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Kumar, Harish, Kaliyan Mathiyazhagan, K. E. K. Vimal, Anbanandam Ramesh, and Vernika Agarwal. Lean and Green Manufacturing: Towards Eco-Efficiency and Business Performance. Springer Singapore Pte. Limited, 2021.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Schmidt, Christopher. Planning of Eco-Efficient Process Chains for Automotive Component Manufacturing. Springer International Publishing AG, 2021.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Lean and Green Manufacturing: Towards Eco-Efficiency and Business Performance. Springer, 2022.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Godana, Nigussie. Identifying Weak Points of Existing Supply Chain and Their Impact on Competitiveness. a Study of the Ethiopian Apparel Manufacturing Eco-System. GRIN Verlag GmbH, 2018.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Eco-Manufacturing"

1

Li, Wen. "Eco-efficiency of Manufacturing Processes." In Sustainable Production, Life Cycle Engineering and Management. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-17365-8_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Kim, Beom Seok, Kyung Hye Park, and Byung Chun Kim. "Information systems for eco-effective manufacturing." In Intelligent Systems for Manufacturing. Springer US, 1998. http://dx.doi.org/10.1007/978-0-387-35390-6_33.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Boret Cordoba, Denis, and Alireza Veshagh. "Managing Eco Design and Sustainable Manufacturing." In Re-engineering Manufacturing for Sustainability. Springer Singapore, 2013. http://dx.doi.org/10.1007/978-981-4451-48-2_10.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Mishima, Nozomu. "Sustainable Production: Eco-efficiency of Manufacturing Process." In Handbook of Sustainable Engineering. Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-1-4020-8939-8_41.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Spirko, Martin, Daniela Spirkova, Dagmar Caganova, and Manan Bawa. "Eco-Innovation in Manufacturing Process in Automotive Industry." In Smart City 360°. Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-33681-7_44.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Ullah, A. M. M. Sharif, Hiroyuki Hashimoto, Fumiya Hayashi, et al. "Comparison between Wooden and Conventional Prototyping:An Eco-Manufacturing Perspective." In Design for Innovative Value Towards a Sustainable Society. Springer Netherlands, 2012. http://dx.doi.org/10.1007/978-94-007-3010-6_179.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Popoola, Olufemi Adebola, and Grace Oluwatofunmi Popoola. "Drivers of Eco-Innovation Among Manufacturing Firms in Nigeria." In Sustainable Development Goals Series. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-46293-1_9.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Ispara Xavier, S., R. Divahar, P. S. Aravind Raj, P. J. Adarsh, Akshay Manoj, and Badusha Jalal. "Manufacturing of Eco-Friendly Brick Using Wasted Textile Apparel." In 2nd International Conference on Smart Sustainable Materials and Technologies (ICSSMT 2023). Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-49826-8_19.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Kishore, R., R. Pradeep, Suyash Roy, et al. "Eco-Efficiency and Business Performance Evaluation—Lean and Green Manufacturing Approach." In Intelligent Manufacturing and Energy Sustainability. Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-33-4443-3_75.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Veshagh, Alireza, Salvador Marval, and Tim Woolman. "Making the Business Case for Eco-Design and Sustainable Manufacturing." In Leveraging Technology for a Sustainable World. Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-29069-5_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Eco-Manufacturing"

1

Magnaval, Gabriel, Tristan Debonnet, and Manuele Margni. "Integrated LCA and Eco-design Process for Hydrogen Technologies: Case Study of the Solid Oxide Electrolyser." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.171756.

Pełny tekst źródła
Streszczenie:
The Life Cycle Assessment (LCA) of a solid oxide electrolyser (SOE) has been performed using publicly available data. The system for producing 1 kg of hydrogen at 25bar and 99.9% purity is represented by a modular structure, which includes the 20-kW solid oxide stack manufacturing, balance of plant equipment, operation consumables, and end-of-life processes. A parametrized life cycle inventory modeling approach was developed. The results illustrate that SOE performs better than steam methane reforming only if supplied by electricity from renewable or nuclear sources. The operation consumables
Style APA, Harvard, Vancouver, ISO itp.
2

VIVAR, Indra CASTRO, Catherine AZZARO-PANTEL, Alberto A. AGUILAR LASSERRE, and Fernando MORALES-MENDOZA. "Eco-Designing Pharmaceutical Supply Chains: A Process Engineering Approach to Life Cycle Inventory Generation." In The 35th European Symposium on Computer Aided Process Engineering. PSE Press, 2025. https://doi.org/10.69997/sct.185378.

Pełny tekst źródła
Streszczenie:
The environmental impacts of pharmaceutical production underscore the need for comprehensive life cycle assessments (LCAs). Offshoring manufacturing, a common cost-saving strategy in the pharmaceutical industry, increases supply chain complexity and reliance on countries like India and China for active pharmaceutical ingredients (APIs). The COVID-19 pandemic exposed Europe�s vulnerability to global crises, prompting initiatives such as the French government�s re-industrialization plan to relocate the production of fifty critical drugs. Paracetamol production has been prioritized, with recent s
Style APA, Harvard, Vancouver, ISO itp.
3

Mabel Rani, A. Jaya, Sujatha S, S. Karkuzhali, Jai Ganesh B, V. Samuthira Pandi, and Shobana D. "Industrial Internet of Things Energy Efficiency: Investigating Low-Power Communication Protocols and Eco-Friendly Data Management in Manufacturing Settings." In 2025 International Conference on Emerging Smart Computing and Informatics (ESCI). IEEE, 2025. https://doi.org/10.1109/esci63694.2025.10988187.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Nouman, Muhammad, Maria Kanwal, Muhammad Sami Ullah, and Syed Abdullah Mansoor. "Sustainable Tire Waste Biochar Additives for Enhancing Concrete Strength and Eco-Efficiency." In 14th International Civil Engineering Conference. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-w2wlri.

Pełny tekst źródła
Streszczenie:
This study checks the practicality of incorporating Waste Tire Biochar (WTBC) during the manufacturing process of concrete as an eco-friendly new option. The study focuses on the effect of mechanical properties and the carbon footprint due to the use of the biochar on traditional concrete. Environmental Impact Assessment (EIA) data demonstrates that the substitution of 1% of cement with WTBC leads to the reduction of CO2 emissions by 1%. On the other hand, 7% replacement, a whopping 7% reduction in CO2 emissions is realized. This means that there is a significant reduction from 291.15 kg/m³ of
Style APA, Harvard, Vancouver, ISO itp.
5

Lopes, Lucas, Harish Daruari, Manuela Almeida, Florindo Gaspar, and Paulo Mendonca. "Closing the Loop of Circularity by Harnessing Additive Manufacturing to Reuse, Recycle and Reintroduce Marine Plastic Waste Back into the Built Environment." In 2024 10th International Conference on Architecture, Materials and Construction & 2024 5th International Conference on Building Science, Technology and Sustainability. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-kptjg4.

Pełny tekst źródła
Streszczenie:
The amount of marine plastic litter in the ocean poses a major threat to the environment, especially coastal communities. High-Density Polyethylene (HDPE), a durable plastic widely used in marine applications like fishing lines, nets, and mooring cables, is a significant contributor to marine pollution. This research explores the potential of repurposing maritime activity-derived HDPE waste for use in the Architecture, Engineering and Construction (AEC) industries through additive manufacturing technologies, such as 3D printing. The study also researches the source of the waste, detailing the
Style APA, Harvard, Vancouver, ISO itp.
6

LI, Shaqi. "Innovative interactive design of eco-friendly digitalwater lanterns based on emotional data." In 3rd International Conference on Advanced Manufacturing Technology and Manufacturing Systems (ICAMTMS 2024), edited by Dailin Zhang and Ke Zhang. SPIE, 2024. http://dx.doi.org/10.1117/12.3039659.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Tanaka, K., T. Katayama, and K. Uno. "Eco-efficient manufacturing process for fibre reinforced thermoplastic." In HPSM 2008. WIT Press, 2008. http://dx.doi.org/10.2495/hpsm080221.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Okazaki, H., and K. Kaneko. "Eco-design of pumps in manufacturing and their use." In Proceedings First International Symposium on Environmentally Conscious Design and Inverse Manufacturing. IEEE, 1999. http://dx.doi.org/10.1109/ecodim.1999.747648.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Jha, Anish Kumar, and Shilpa Pankaj Kewate. "Manufacturing of Eco Bricks: A Sustainable Solution for Construction." In The 5th International Conference on Innovative Product Design and Intelligent Manufacturing Systems. MDPI, 2024. http://dx.doi.org/10.3390/engproc2024066028.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Kumaresh, M., N. Rajesh Jesudoss Hynes, and R. Sankaranarayanan. "Eco-friendly glycol based nano cutting fluids for manufacturing sectors." In 3RD INTERNATIONAL CONFERENCE ON CONDENSED MATTER AND APPLIED PHYSICS (ICC-2019). AIP Publishing, 2020. http://dx.doi.org/10.1063/5.0001246.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Eco-Manufacturing"

1

Zhang, Jinwen, Baoming Zhao, Tuan Liu, et al. Upcycling of CFRP Waste: Viable Eco-friendly Chemical Recycling and Manufacturing of Novel Repairable and Recyclable Composites. Office of Scientific and Technical Information (OSTI), 2025. https://doi.org/10.2172/2511313.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Menendez, A., M. Coello, J. Suarez, et al. Processability and mechanical properties of spent coffee ground (SCG) and polypropylene biocomposites. Universidad de los Andes, 2024. https://doi.org/10.51573/andes.pps39.gs.bbb.5.

Pełny tekst źródła
Streszczenie:
The circular economy encourages optimizing use of plastics, waste reduction, sustainable materials, and processing of plastic products. In this framework, the use of agricultural waste materials promotes waste reduction and eco-design in plastic product manufacturing. This study researched the preparation of an isotatic polypropylene (PP) matrix (MFI 50 grade) with spent coffee grounds (SCG) and various commercial additives. The biocomposites were analyzed to evaluate their mechanical properties and processability. PP and SCG composites were synthesized with 30% SCG content with maleic anhydri
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Eco-Manufacturing” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii