Zaloguj się

Gotowe bibliografie tematyczne / High voltage insulating / Rozprawy doktorskie

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: High voltage insulating.

Rozprawy doktorskie na temat „High voltage insulating”

Autor: Grafiati

Data publikacji: 5 października 2024

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „High voltage insulating”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.

1

Rux, Lorelynn Mary. "The physical phenomena associated with stator winding insulation condition as detected by the ramped direct high-voltage method." Master's thesis, Mississippi State : Mississippi State University, 2004. http://library.msstate.edu/etd/show.asp?etd=etd-04042004-112949.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Huldén, Pierre. "Conductivity measurement on thick insulating plaque samples." Thesis, KTH, Elektroteknisk teori och konstruktion, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-150956.

Pełny tekst źródła

Streszczenie:

The conductivity is one of the main properties of HVDC cable insulation materials and needs to be evaluated carefully. Since measurement on cables is time consuming, often thin specimens and normal conductivity measurement cells are used to compare the materials. In this way however, the bulk effects will be less represented in the measurement and the results will be less representative. Instead, one needs to perform the measurements on thick plate samples and with higher voltage levels. This work focuses on the conductivity measurements on thick HVDC insulation plate samples subject to a high

Style APA, Harvard, Vancouver, ISO itp.

3

Zavattoni, Laëtitia. "Conduction phenomena through gas and insulating solids in HVDC gas insulated substations, and consequences on electric field distribution." Thesis, Grenoble, 2014. http://www.theses.fr/2014GRENT063/document.

Pełny tekst źródła

Streszczenie:

L'émergence des énergies renouvelables a entraîné le développement de nouvelles technologies pour la distribution de l'énergie sur de longues distances. Ces dernières sont basées sur le transport via de hautes tensions continues (HVDC) pour éviter les pertes capacitives. Ce réseau de distribution est interconnecté via des Postes Sous Enveloppes Métalliques (PSEM), dont l'isolation est composée de gaz sous pression (SF6) et d'isolants solides (résine époxy), qui doivent résister sous HVDC. Dans ces dispositifs, le champ électrique n'est plus déterminé par la permittivité relative des matériaux,

Style APA, Harvard, Vancouver, ISO itp.

4

Yahyaoui, Hanen. "Matériaux isolants pour appareillages haute tension dans le domaine du courant continu : comportement et vieillissement." Thesis, Montpellier, 2015. http://www.theses.fr/2015MONTS267.

Pełny tekst źródła

Streszczenie:

Les projets de mise en place dans les prochaines décennies de « super réseaux intelligents », qui prévoient la construction de centrales de production à des milliers de kms des centres de consommation, nécessite le développement à large échelle du transport de très fortes puissances par câbles à courant continu. Les principaux verrous à ce développement se situent au niveau du câble et des appareillages adéquats, qui doivent être conçus sur des critères spécifiques et comporter des matériaux isolants ayant des propriétés particulières. Outre la variation de la résistivité qui dépend fortement

Style APA, Harvard, Vancouver, ISO itp.

5

Silva, Igor. "Propriétés des matériaux isolants pour application dans les appareillages moyenne tension à tension continue." Electronic Thesis or Diss., Université Grenoble Alpes, 2024. http://www.theses.fr/2024GRALT043.

Pełny tekst źródła

Streszczenie:

Les récentes avancées dans la technologie du courant continu, du côté du transport à haute tension et de la consommation à basse tension, ont propulsé le courant continu de moyenne tension (MVDC) au premier plan. Cette thèse explore les propriétés isolantes en courant continu de deux matériaux couramment utilisés dans l'équipement de distribution : de l'époxy chargé en micro-silice et le silicone elastomère.Dans une configuration monocouche, chaque matériau a fait l'objet d'une enquête approfondie, mettant l'accent sur les caractéristiques de sorption d'eau et la conduction électrique. Des mes

Style APA, Harvard, Vancouver, ISO itp.

6

Freye, Claudius [Verfasser], Frank [Akademischer Betreuer] Jenau, and Thomas [Gutachter] Leibfried. "Methoden und Aspekte zur Leitfähigkeitsanalyse von Isolationsmaterialien der Kabeltechnologie und zur Isolationskoordination für Systeme der Hochspannungsgleichstromübertragung (HGÜ) : Methods and aspects for conductivity analysis of insulating materials in cable technology and for insulation coordination in high-voltage direct current transmission (HVDC) systems / Claudius Freye ; Gutachter: Thomas Leibfried ; Betreuer: Frank Jenau." Dortmund : Universitätsbibliothek Dortmund, 2020. http://d-nb.info/1214887627/34.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Bialek, Thomas Owen. "Evaluation and modeling of high-voltage cable insulation using a high-voltage impulse." Diss., Mississippi State : Mississippi State University, 2005. http://library.msstate.edu/content/templates/?a=72.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Luo, Jing. "Novel insulation techniques for high voltage pulse transformers." Thesis, Loughborough University, 2007. https://dspace.lboro.ac.uk/2134/13327.

Pełny tekst źródła

Streszczenie:

This thesis describes a research investigation into novel designs of high voltage pulse transformers using magnetic insulation, which is the only practicable form of insulation for much of the equipment presently used in ultrahigh voltage pulsed-power work, including transmission lines and plasma opening switches. Although its use in transformers would bring important advantages in both size and weight reductions, a number of seemingly insurmountable problems have however so far prevented this. Two novel arrangements are presented in this thesis: one of these is a 500 kV transformer with self-

Style APA, Harvard, Vancouver, ISO itp.

9

Hare, Richard W. "Modelling space charge in solid dielectrics." Thesis, University of Bristol, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.482030.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Wallström, Stina. "Biofilms on silicone rubber for outdoor high voltage insulation." Doctoral thesis, KTH, Fiber- och polymerteknik, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-171.

Pełny tekst źródła

Streszczenie:

Silicone rubber high voltage insulators are sometimes colonised by microorganisms which form a biofilm on the surface of the infected unit. In this work insulators exposed to the outdoor environment in Sweden, Sri Lanka and Tanzania respectively have been studied. The biofilms colonising the insulators were shown to be of roughly the same composition regardless of their origin. Algae in association with bacteria dominated the biofilms and provided nutrition to mold growth. The isolated microorganisms were further used to study the effect of a biofilm on different silicone rubber materials. New

Style APA, Harvard, Vancouver, ISO itp.

11

Washabaugh, Andrew Patrick. "Electrokinetic pumping of semi-insulating liquids by traveling wave high voltages." Thesis, Massachusetts Institute of Technology, 1989. http://hdl.handle.net/1721.1/14509.

Pełny tekst źródła

Streszczenie:

Thesis (M.S.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 1989.<br>Includes bibliographical references (leaves 182-184).<br>by Andrew Patrick Washabaugh.<br>M.S.

Style APA, Harvard, Vancouver, ISO itp.

12

Wallström, Stina. "Biofilms on silicone rubber for materials outdoor high voltage insulation /." Stockholm : Univ, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-171.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Goss, Ben. "Degradation and life time prediction of high voltage insulation materials." Thesis, Queensland University of Technology, 2001.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

14

Okubo, H., M. Hikita, H. Goshima, H. Sakakibara, and N. Hayakawa. "High voltage insulation performance of cryogenic liquids for superconducting power apparatus." IEEE, 1996. http://hdl.handle.net/2237/6879.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

15

Cargill, Steven M. "Corona screen effectiveness in large machines under high voltage, high frequency transient conditions." Thesis, Robert Gordon University, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.298316.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

16

Saeishirazi, Mohammadmahdi [Verfasser]. "Influence of Nanofillers on High Voltage Polymeric Solid Insulation Systems / Mohammadmahdi Saeishirazi." München : Verlag Dr. Hut, 2014. http://d-nb.info/1060587580/34.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Whitfield, Thomas Britain. "An analysis of copper transport in the insulation of high voltage transformers." Thesis, University of Surrey, 2001. http://epubs.surrey.ac.uk/843581/.

Pełny tekst źródła

Streszczenie:

Examination of the paper insulation and copper stress braiding during stripdown of a number of Current Transformers (FMK type 400kV) has revealed the presence of dark deposits. Copper foils are often interspersed within layers of paper insulation and mineral oil found in transformer windings. The dark deposits were often found in association with these foils, affecting several layers of paper in addition to the layer in contact with the copper foil. This thesis describes the research undertaken to identify these deposits and establish a mechanism for the transportation through the paper layers

Style APA, Harvard, Vancouver, ISO itp.

18

Wang, Pei. "Computer based on-line diagnostics of insulation quality of high voltage apparatus." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0020/MQ53240.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Cariou-Saintemarie, Nathalie. "Initiation of electrical degradation in high voltage polymeric cable insulation : electroluminescence detection." Thesis, University of Southampton, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.342808.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

20

Zhao, Shishuo. "High Frequency Isolated Power Conversion from Medium Voltage AC to Low Voltage DC." Thesis, Virginia Tech, 2017. http://hdl.handle.net/10919/74969.

Pełny tekst źródła

Streszczenie:

Modern data center power architecture developing trend is analyzed, efficiency improvement method is also discussed. Literature survey of high frequency isolated power conversion system which is also called solid state transformer is given including application, topology, device and magnetic transformer. Then developing trend of this research area is clearly shown following by research target. State of art wide band gap device including silicon carbide (SiC) and gallium nitride (GaN) devices are characterized and compared, final selection is made based on comparison result. Mostly used high f

Style APA, Harvard, Vancouver, ISO itp.

21

Ariffin, Azrul Mohd. "The measurement and modelling of electroluminescence in high voltage polymeric cable insulation materials." Thesis, University of Southampton, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.494683.

Pełny tekst źródła

Streszczenie:

Since space charge plays a significant role in long-term electrical degradation of polymeric insulation in high voltage cables, there is growing interest in the measurement of the energy dissipation of mobile and trapped charges in the dielectric molecules. The dissipation process is associated with the emission of visible photons, a process known as electroluminescence (EL) and can be used, potentially, as an indicator for the inhibition of electrical ageing of insulation. This thesis is based on an investigation into the occurrence of EL in dielectric materials as a result of applying high a

Style APA, Harvard, Vancouver, ISO itp.

22

Montasser, Yuseph. "Design and Development of a Power Modulator for Insulation Testing." Thesis, University of Waterloo, 2006. http://hdl.handle.net/10012/2895.

Pełny tekst źródła

Streszczenie:

Variable speed drives allow for more precise speed control of induction motors, are of high power factor, and offer fast response characteristics, compared to older technologies, such as motor-generator sets and eddy current clutches. However, due to the high switching frequencies as well as the high dV/dt in the output increased dielectric stresses are produced in the insulation system of the motor they supply. Due to the use of these solid state drives there have been concerns of premature failure in large, medium and high voltage, motors. To fully understand and deal with these con

Style APA, Harvard, Vancouver, ISO itp.

23

Mesgarpour, Tousi Maryam. "Electric Field Grading and Electrical Insulation Design for High Voltage, High Power Density Wide Bandgap Power Modules." Diss., Virginia Tech, 2020. http://hdl.handle.net/10919/100621.

Pełny tekst źródła

Streszczenie:

The trend towards more and all-electric apparatuses and more electrification will lead to higher electrical demand. Increases in electrical power demand can be provided by either higher currents or higher voltages. Due to "weight" and "voltage" drop, a raise in the current is not preferred; so, "higher voltages" are being considered. Another trend is to reduce the size and weight of apparatuses. Combined, these two trends result in the high voltage, high power density concept. It is expected that by 2030, 80% of all electric power will flow through "power electronics systems". In regards to th

Style APA, Harvard, Vancouver, ISO itp.

24

Nikjoo, Roya. "Dielectric Response and Partial Discharge Diagnostics of Insulation Systems by Utilizing High Voltage Impulses." Doctoral thesis, KTH, Elektroteknisk teori och konstruktion, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-187632.

Pełny tekst źródła

Streszczenie:

In this thesis, power system transients are considered as an opportunity for development of on-line diagnostics of power components and specifically the insulation systems of power transformers and bushings. A new technique for on-line dielectric response measurement of power transformer bushings is proposed which utilizes natural transients in the power system, such as lightning and switching surges, as stimuli. Laboratory investigations are done on implementation of the proposed technique. Measurement considerations, data acquisition and processing involved in achievement of reasonable accur

Style APA, Harvard, Vancouver, ISO itp.

25

Blackmore, Paul David. "Degradation of polymeric outdoor high voltage insulation : surface discharge phenomena and condition assessment techniques." Thesis, Queensland University of Technology, 1997.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

26

Benwell, Andrew L. "Flashover prevention on polystyrene high voltage insulators in a vacuum." Diss., Columbia, Mo. : University of Missouri-Columbia, 2007. http://hdl.handle.net/10355/5018.

Pełny tekst źródła

Streszczenie:

Thesis (M.S.)--University of Missouri-Columbia, 2007.<br>The entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on March 18, 2008) Includes bibliographical references.

Style APA, Harvard, Vancouver, ISO itp.

27

Tran, Van Top. "Étude de la génération des streamers dans l'huile minérale sous tension impulsionnelle et alternative." Grenoble INPG, 1999. http://www.theses.fr/1999INPG0024.

Pełny tekst źródła

Streszczenie:

L'objectif de cette these est d'etudier la generation des streamers dans l'huile minerale sous tension impulsionnelle et tension alternative avec des conditions de champ largement variees en presence de certaines pollutions (particules et eau). Ce travail apporte une meilleure comprehension de la generation des phenomenes precurseurs du claquage. Les resultats obtenus mettent en evidence l'influence importante de la geometrie et des impuretes (particules, eau) sur la generation des streamers. Un effet remarquable de diminution du champ de generation avec l'augmentation du rayon de courbure de

Style APA, Harvard, Vancouver, ISO itp.

28

Bandaru, Sreekanth. "Effect of high frequency pulse voltages and high temperature on the lifetime characteristics of magnet wires." Master's thesis, Mississippi State : Mississippi State University, 2004. http://library.msstate.edu/etd/show.asp?etd=etd-05132004-135217.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

29

Gavrilenko, Veronika. "Characterization of winding insulation of electrical machines fed by voltage waves with high dV/dt." Thesis, université Paris-Saclay, 2020. http://www.theses.fr/2020UPAST027.

Pełny tekst źródła

Streszczenie:

L’isolation des bobinages des moteurs alimentés par des convertisseurs statiques basés sur la modulation de largeur d'impulsion est soumise à des contraintes électriques provenant de la forme d'onde de la tension d'alimentation. Les phénomènes de nuisances électromagnétiques sur l’ensemble de la chaîne de conversion, les ondes réfléchies dans le câble d’alimentation, ainsi que la non adaptation des impédances du câble et de l’enroulement de la machine peuvent conduire à l’apparition de surtensions aux bornes de la machine suffisamment élevées pour dépasser la tension d’apparition des décharges

Style APA, Harvard, Vancouver, ISO itp.

30

Desmars, Loriane. "Etude des propriétés électriques et thermiques de matériaux composites à matrice époxy-anhydride pour l'isolation haute tension." Thesis, Lyon, 2019. http://www.theses.fr/2019LYSEI021.

Pełny tekst źródła

Streszczenie:

L’avènement des énergies renouvelables, notamment offshore, et la nécessité de transporter l’électricité sur des distances toujours plus grandes tout en réduisant les pertes en ligne requièrent la mise en place d’un nouveau réseau électrique plus performant, le supergrid. L’amélioration des sous-stations ultra haute tension en courant alternatif (UHVAC) de type poste sous enveloppe métallique (PSEM), i.e. la réduction de leur empreinte au sol ou leur montée en tension, s’inscrit parmi les défis engendrés par le développement du supergrid. L’amélioration de la tenue aux contraintes électrotherm

Style APA, Harvard, Vancouver, ISO itp.

31

Vogelsang, Ruben. "Time to breakdown of high voltage winding insulations with respect to microscopic properties and manufacturing qualities /." [S.l.] : [s.n.], 2004. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=15656.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

Elbuzedi, Mohamed. "Material study and properties of polymers used in composite high voltage insulators." Thesis, Stellenbosch : Stellenbosch University, 2007. http://hdl.handle.net/10019.1/17749.

Pełny tekst źródła

Streszczenie:

Thesis (MSc)--University of Stellenbosch, 2007.<br>ENGLISH ABSTRACT: Silicone rubber, particularly poly(dimethylsiloxane) (PDMS), has been increasingly used in the manufacture of outdoor high voltage insulators in the recent years. PDMS offers several advantages that make it suitable for outdoor use, such as low weight, a hydrophobic surface, stability, and excellent performance in heavily polluted environments. PDMS surfaces can, however, become progressively hydrophilic due to surface oxidation caused by corona discharge, UV radiation and acid rain. In this study, PDMS samples of contr

Style APA, Harvard, Vancouver, ISO itp.

33

Abraham, Berhane Teclesenbet. "Degradation and recovery of polydimethylsiloxane (PDMS) based composites used as high voltage insulators." Thesis, Stellenbosch : Stellenbosch University, 2004. http://hdl.handle.net/10019.1/49902.

Pełny tekst źródła

Streszczenie:

Thesis (MSc)--Stellenbosch University, 2004.<br>ENGLISH ABSTRACT: Polydimethylsiloxane (PDMS) compounds are utilized in outdoor high voltage insulation due to their low weight, vandalism resistance, better anti-contamination performance and their superior hydrophobic nature. Under severe environmental conditions and over prolonged service time, however, the hydrophobic surface can gradually become hydrophilic and then recover with adequate resting period. In this study, room temperature vulcanized (RTV) PDMS samples were prepared with different formulations and then exposed to corona d

Style APA, Harvard, Vancouver, ISO itp.

34

Kiiza, Respicius Clemence. "The Effect of HV Impulses on Partial Discharge Activity and on the Dielectric Response in Oil-impregnated Paper Insulation." Doctoral thesis, KTH, Elektroteknisk teori och konstruktion, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-142027.

Pełny tekst źródła

Streszczenie:

This work investigates how HV impulses affect the behavior of partial discharge (PD) activity and the low voltage dielectric response of oil-impregnated paper insulation. It also investigates how the change in the PD activity is related to the degradation level of oil-impregnated paper insulation. In order to accomplish these objectives, the ageing were done under three different electrical stress conditions, i.e. HV impulses following an early stage 50 Hz AC PD activity, a prolonged PD activity at a 50 Hz AC stress alone, and a combination of HV impulses and a prolonged PD activity at a 50 Hz

Style APA, Harvard, Vancouver, ISO itp.

35

Razavi, Borghei Seyyed Moein. "The Modeling of Partial Discharge under Fast, Repetitive Voltage Pulses Using Finite-Element Analysis." Thesis, Virginia Tech, 2020. http://hdl.handle.net/10919/98001.

Pełny tekst źródła

Streszczenie:

By 2030, it is expected that 80% of all electric power will flow through power electronics systems. Wide bandgap power modules that can tolerate higher voltages and currents than silicon-based modules are the most promising solution to reducing the size and weight of power electronics systems. These wide-bandgap power modules constitute powerful building blocks for power electronics systems, and wide bandgap-based converter/power electronics building blocks are envisaged to be widely used in power grids in low- and medium-voltage applications and possibly in high-voltage applications for high-

Style APA, Harvard, Vancouver, ISO itp.

36

Mouton, Gerton Nicolaas Jacobus. "An evaluation of different material line insulators under high voltage AC and bipolar DC excitation in a marine polluted environment." Thesis, Stellenbosch : Stellenbosch University, 2012. http://hdl.handle.net/10019.1/71940.

Pełny tekst źródła

Streszczenie:

Thesis (MScEng)--Stellenbosch University, 2012.<br>ENGLISH ABSTRACT: The worldwide increase in the popularity of high voltage direct current (HVDC) power transmission application has led to questions regarding the performance of high voltage alternating current (HVAC) insulators when energized under HVDC excitation. These questions have led researchers conduct numerous research projects worldwide. A particular question NamPower (the power utility in Namibia) has faced is: how do these insulators perform and age when energized under HVDC excitation in heavily polluted environments? This questio

Style APA, Harvard, Vancouver, ISO itp.

37

Am, Sokchea. "Power modules design and optimization for medium power of MMC inverters : high insulation voltage gate driver system and 3D packaging." Thesis, Université Grenoble Alpes (ComUE), 2016. http://www.theses.fr/2016GREAT095/document.

Pełny tekst źródła

Streszczenie:

Dans cette recherche, l'auteur met l'accent à la fois sur une optimisation de la conception pour une (MV-MMC: Medium Voltage Modular Multilevel Converter) utiliser comme un DC/AC ou AC/DC et à deuxième fois sur la grille pour les modules IGBT qui sont utilisés dans ce type d'application. Par exemple, les convertisseurs de MMC sont utilisés dans les systèmes d'alimentation des navires électriques avec les buses de moyenne tension de courant continu (en anglais: medium-voltage direct current (MVDC)). Pour une telle application, selon le document IEEE, la tension du bus DC peut être jusqu'à 35kV.

Style APA, Harvard, Vancouver, ISO itp.

38

Mogniotte, Jean-François. "Conception d'un circuit intégré en SiC appliqué aux convertisseur de moyenne puissance." Thesis, Lyon, INSA, 2014. http://www.theses.fr/2014ISAL0004/document.

Pełny tekst źródła

Streszczenie:

L’émergence d’interrupteurs de puissance en SiC permet d’envisager des convertisseurs de puissance capables de fonctionner au sein des environnements sévères tels que la haute tension (> 10 kV ) et la haute température (> 300 °C). Aucune solution de commande spécifique à ces environnements n’existe pour le moment. Le développement de fonctions élémentaires en SiC (comparateur, oscillateur) est une étape préliminaire à la réalisation d’un premier démonstrateur. Plusieurs laboratoires ont développé des fonctions basées sur des transistors bipolaires, MOSFETs ou JFETs. Cependant les recherc

Style APA, Harvard, Vancouver, ISO itp.

39

Vosloo, Wallace L. (Wallace Lockwood). "A comparison of the performance of high-voltage insulator materials in a severely polluted coastal environment." Thesis, Stellenbosch : Stellenbosch University, 2002. http://hdl.handle.net/10019.1/52625.

Pełny tekst źródła

Streszczenie:

Thesis (PhD)--University of Stellenbosch, 2002.<br>ENGLISH ABSTRACT: The main aim of this research programme was to compare the relative performance of different insulator materials used in South Africa when subjected to a severe marine pollution environment. A test programme and procedure, test facility and instrumentation were established. Some novel instrumentation and monitoring equipment were developed and built specifically for this research programme, supported by data analysing software programs. In order to compare material performance only, all non-material design variables b

Style APA, Harvard, Vancouver, ISO itp.

40

Que, Weiguo. "Electric Field and Voltage Distributions along Non-ceramic Insulators." The Ohio State University, 2002. http://rave.ohiolink.edu/etdc/view?acc_num=osu1037387155.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

41

Eisel, Thomas. "Cooling of electrically insulated high voltage electrodes down to 30 mK." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2011. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-77442.

Pełny tekst źródła

Streszczenie:

The Antimatter Experiment: Gravity, Interferometry, Spectroscopy (AEGIS) at the European Organization for Nuclear Research (CERN) is an experiment investigating the influence of earth’s gravitational force upon antimatter. To perform precise measurements the antimatter needs to be cooled to a temperature of 100 mK. This will be done in a Penning trap, formed by several electrodes, which are charged with several kV and have to be individually electrically insulated. The trap is thermally linked to a mixing chamber of a 3He-4He dilution refrigerator. Two link designs are examined, the Rod desig

Style APA, Harvard, Vancouver, ISO itp.

42

Shifidi, S. K. "Modelling and performance evaluation of an HV impulse test arrangement with HVDC bias." Thesis, Stellenbosch : University of Stellenbosch, 2009. http://hdl.handle.net/10019.1/2722.

Pełny tekst źródła

Streszczenie:

Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2009.<br>ENGLISH ABSTRACT: From a systems operation and design perspective, it is important to understand the behaviour of HVDC system insulation when presented with high voltage transients, such as induced by lightning and switching operations. Therefore, this thesis investigates the design, operation and performance of a circuit arrangement that can be used in high voltage laboratories to generate impulse voltage waveforms superimposed on a dc bias voltage. The circuit arrangement consists of an impulse

Style APA, Harvard, Vancouver, ISO itp.

43

Reynes, Hugo. "Conception d'un module électronique de puissance pour application haute tension." Thesis, Lyon, 2018. http://www.theses.fr/2018LYSEI035.

Pełny tekst źródła

Streszczenie:

Satisfaire les besoins en énergie de manière responsable est possible grâce aux énergies renouvelables, notamment éoliennes et solaires. Cependant ces centres de captation d’énergie sont éloignés dans zones de consommation. Le transport de l’énergie via des réseaux HVDC (haute tension courant continu) permet un rendement et une flexibilité avantageuse face au transport HVAC (haute tension courant alternatif). Ceci est rendu possible grâce aux convertisseurs utilisant l’électronique de puissance. Les récents développements sur les semi-conducteurs à large bande interdite, plus particulièrement

Style APA, Harvard, Vancouver, ISO itp.

44

Fors, Jonathan. "Modeling and OpenFOAM simulation of streamers in transformer oil." Thesis, Linköpings universitet, Institutionen för fysik, kemi och biologi, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-80932.

Pełny tekst źródła

Streszczenie:

Electric breakdown in power transformers is preceded by pre-breakdown events such as streamers. The understanding of these phenomena is important in order to optimize liquid insulation systems. Earlier works have derived a model that describes streamers in transformer oil and utilized a finite element method to produce numerical solutions. This research investigates the consequences of changing the numerical method to a finite volume-based solver implemented in OpenFOAM. Using a standardized needle-sphere geometry, a number of oil and voltage combinations were simulated, and the results are fo

Style APA, Harvard, Vancouver, ISO itp.

45

Pavlas, Ondřej. "Návrh uložení vysokonapěťových elektrod projekční sestavy elektronového mikroskopu na izolační tyče." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2020. http://www.nusl.cz/ntk/nusl-433282.

Pełny tekst źródła

Streszczenie:

In it´s first part, this presented master´s thesis focuses on the problematics of actions taking place in dielectric materials and phenomenons on the surface of real insulators placed in electric field. This research is followed by selection and rating of appropriate ceramic materials for the actual design of the metal – ceramic assembly. The greatest emphasis is given to design of the optimal configuration of the insulator and electrode, which is supported by simulations from the software that implements finite element method. Eventually, the high voltage tests of the assembly used for measur

Style APA, Harvard, Vancouver, ISO itp.

46

Wardman, John Blackburn. "Vulnerability of Electric Power Systems to Volcanic Ashfall Hazards." Thesis, University of Canterbury. Geological Sciences, 2013. http://hdl.handle.net/10092/8014.

Pełny tekst źródła

Streszczenie:

Volcanic eruptions are powerful natural events which impact strongly on society. As human populations grow and expand into volcanically active areas, their exposure and vulnerability to volcanic hazards is also increasing. Of all volcanic hazards, ashfall is the most likely to impact lifelines because of the large areas affected. The widespread dispersal of ash can cause large-scale disruption of vital infrastructure services, aviation, and primary production. Electric power supply is arguably the most crucial of modern infrastructure systems, especially considering the dependence of other sec

Style APA, Harvard, Vancouver, ISO itp.

47

Pallon, Love. "Polyethylene/metal oxide nanocomposites for electrical insulation in future HVDC-cables : probing properties from nano to macro." Doctoral thesis, KTH, Polymera material, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-193591.

Pełny tekst źródła

Streszczenie:

Nanocomposites of polyethylene and metal oxide nanoparticles have shown to be a feasible approachto the next generation of insulation in high voltage direct current cables. In order to reach an operationvoltage of 1 MV new insulation materials with reduced conductivity and increased breakdown strengthas compared to modern low-density polyethylene (LDPE) is needed.In this work polyethylene MgO nanocomposites for electrical insulation has been produced andcharacterized both from an electrical and material perspective. The MgO nanoparticles weresynthesized into polycrystalline nanoparticles with

Style APA, Harvard, Vancouver, ISO itp.

48

Глєбов, Олег Юрійович. "Вдосконалення заземлювальних пристроїв електричних підстанцій для забезпечення безаварійної роботи вторинних кіл". Thesis, Національний технічний університет "Харківський політехнічний інститут", 2019. http://repository.kpi.kharkov.ua/handle/KhPI-Press/40844.

Pełny tekst źródła

Streszczenie:

Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю 05.14.02 – електричні станції, мережі та системи. – Національний технічний університет "Харківський політехнічний інститут", Харків, 2019 р. Дисертацію присвячено вдосконаленню заземлювальних пристроїв підстанцій напругою 330(220)/150(110) кВ за критерієм запобігання пошкодження ізоляції кабелів струмових захистів при ударі блискавки та при короткому замиканні на шинах розподільного пристрою вказаних класів напруги. На підставі аналізу експериментальних даних, отриманих на 80 діючих підстанціях України, визнач

Style APA, Harvard, Vancouver, ISO itp.

49

Глєбов, Олег Юрійович. "Вдосконалення заземлювальних пристроїв електричних підстанцій для забезпечення безаварійної роботи вторинних кіл". Thesis, Національний технічний університет "Харківський політехнічний інститут", 2019. http://repository.kpi.kharkov.ua/handle/KhPI-Press/40840.

Pełny tekst źródła

Streszczenie:

Дисертація на здобуття наукового ступеня кандидата технічних наук за спеціальністю 05.14.02 – електричні станції, мережі та системи. – Національний технічний університет "Харківський політехнічний інститут", Харків, 2019 р. Дисертацію присвячено вдосконаленню заземлювальних пристроїв підстанцій напругою 330(220)/150(110) кВ за критерієм запобігання пошкодження ізоляції кабелів струмових захистів при ударі блискавки та при короткому замиканні на шинах розподільного пристрою вказаних класів напруги. На підставі аналізу експериментальних даних, отриманих на 80 діючих підстанціях України, визначе

Style APA, Harvard, Vancouver, ISO itp.

50

Shirvani, Boroujeni Ali. "Ein Beitrag zum Entladungsverhalten langer Luftfunkenstrecken bei Blitzspannung." Doctoral thesis, Universitätsbibliothek Chemnitz, 2015. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-158163.

Pełny tekst źródła

Streszczenie:

Für die Menschen zählen Gewitter mit Donner und Blitz zu den ältesten bekannten Phänomenen der Natur. Die Tatsache, dass Blitze dennoch bis heute nicht abschließend erforscht sind, liegt in dem äußerst komplexen, schnellen und stochastischen Verhalten der Blitzentladung begründet. Der Autor befasste sich in Rahmen dieser Arbeit u.a. mit der Entwicklung eines modernen Messsystems, durch das die Erfassung von sowohl elektrischen als auch optischen Parametern der im Nanosekundenbereich ablaufenden Prozesse der Entladungen möglich wurde. Es handelt sich um technisch anspruchsvolle Messungen von ho

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!