Zaloguj się

Gotowe bibliografie tematyczne / House construction – Equipment and supplies / Rozprawy doktorskie

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: House construction – Equipment and supplies.

Rozprawy doktorskie na temat „House construction – Equipment and supplies”

Autor: Grafiati

Data publikacji: 27 lipca 2024

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „House construction – Equipment and supplies”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.

1

Rodriguez-Anderson, Santiago Martin. "Sensible Air to Air Heat Recovery Strategies in a Passive House." PDXScholar, 2015. https://pdxscholar.library.pdx.edu/open_access_etds/2123.

Pełny tekst źródła

Streszczenie:

Due to rising energy costs and concerns about global climate change, high performance buildings are more in demand than ever before. With roughly 20% of the total energy consumption in the United States being devoted to residential use, this sector represents a significant opportunity for future savings. There are many guidelines and standards for reducing building energy consumption. One of the most stringent is the Passive House Standard. The standard requires that that air infiltration is less than or equal to 0.6 air changes per hour at a 50 Pascal pressure difference (ACH 50), annual heat

Style APA, Harvard, Vancouver, ISO itp.

2

Ponnaluru, Srinivasa Sasdhar. "Empirical analysis of used construction equipment and auction house revenues." Pullman, Wash. : Washington State University, 2009. http://www.dissertations.wsu.edu/Dissertations/Fall2009/s_ponnaluru_120109.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Wu, Tong-Ching Tom. "The performance of the ice hockey slap and wrist shots : the effects of stick construction and player skill." Thesis, McGill University, 2002. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=33949.

Pełny tekst źródła

Streszczenie:

This thesis was to examine the interaction of players' skill level, body strength, and various types of stick construction and stiffness on the performance of the hockey shots. Forty subjects were tested, and each subject performed the slap and wrist shots with different stick shaft constructions and stiffness. Shot mechanics were evaluated by simultaneously recording of ground reaction forces, stick movements and peak puck velocity. Data analyzed with a 4-way ANOVA for several dependent variables. The results indicated that: (1) the slap shot was faster than the wrist shot corresponding to gr

Style APA, Harvard, Vancouver, ISO itp.

4

Bennink, Dirk. "Design of solids separation equipment : a thesis." Thesis, Queensland University of Technology, 1989. https://eprints.qut.edu.au/36450/1/36450_Bennink_1989.pdf.

Pełny tekst źródła

Streszczenie:

This work covers a reassessment of the 'Hot Break' separation problem by a mechanical engineer from outside the brewing industry. The solid-liquid separation problem was therefore investigated without prior knowledge of constraints or current practices. During the brewing of beer an unwanted, insoluble precipitate, 'trub' is formed, reported to have undesirable effects on the finished beer quality. The existing equipment, 'whirlpool' separators, designed to eliminate this 'trub' performed poorly, allowing much of the precipitate to be carried over to subsequent processes. To remedy

Style APA, Harvard, Vancouver, ISO itp.

5

Spyrou, Evangelos. "The effect of shell geometry on the impact attenuating capabilities of ice hockey helmets relative to liner structural characteristics and impact conditions." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1997. http://www.collectionscanada.ca/obj/s4/f2/dsk2/ftp01/MQ29578.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Webster, James. "The perception of comfort and fit of personal protective equipment in sport." Thesis, Loughborough University, 2010. https://dspace.lboro.ac.uk/2134/6242.

Pełny tekst źródła

Streszczenie:

During the design of sports equipment, the main focus is usually on physical performance attributes, neglecting key subjective factors such as feel and comfort. The personal protective equipment worn in sport is a typical example, where injury prevention has taken precedence over user comfort, but it is anticipated that with a new approach to the design process, comfort can be improved without sacrificing protection. Using cricket leg guards and taekwondo chest guards as an example, this study aimed to develop a systematic method for assessing user perceptions and incorporating them into the d

Style APA, Harvard, Vancouver, ISO itp.

7

McNeely, James Noah. "The design of a mechanical device for making baby food." Thesis, Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/23159.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Zuo, Yiying 1974. "Design, analysis, and implementation of multi-port refraction based electro-optic switches." Thesis, McGill University, 2006. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=103035.

Pełny tekst źródła

Streszczenie:

Electro-optic (EO) beam deflectors are voltage-controlled devices widely used for scanning and switching applications. For example, high-speed, low-loss optical switches aimed at future optical networks can be built on EO deflectors. Novel EO deflectors distinguish themselves with a much-improved steering performance, high-speed response and simple fabrication requirements. Patterned ferroelectric crystals such as LiTaO3 are first poled to provide the required prism shaped domain structures. The application of an electrical field across the entire crystal can then be used to drive the trajecto

Style APA, Harvard, Vancouver, ISO itp.

9

Bibby, Lee. "Improving design management techniques in construction." Thesis, Loughborough University, 2003. https://dspace.lboro.ac.uk/2134/793.

Pełny tekst źródła

Streszczenie:

Recent years has seen a significant drive away from traditional procurement routes with contractors finding themselves with an increasing responsibility for control of design - a process they have had little experience in managing. They now have to adapt accordingly. The learning curve is steep, not least because many projects must now be delivered fast track while co-ordinating increasingly complex fabric and content of buildings without a platform of accepted good practice to manage the design process. This is a major factor preventing the UK construction industry from delivering projects on

Style APA, Harvard, Vancouver, ISO itp.

10

Patel, Umesh. "Control authority and the design of active controllers for buffet suppression of the F-15 and F/A-18." Thesis, Georgia Institute of Technology, 2003. http://hdl.handle.net/1853/12161.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Argon, Cenk. "Turbo product codes for optical communications and data storage." Diss., Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/15350.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Schmitt, Robert Joseph. "The design of a flexible fixturing system." Thesis, Georgia Institute of Technology, 1999. http://hdl.handle.net/1853/17958.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

13

Liu, Li, and 劉荔. "Compact planar UWB antennas for wireless device applications." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2014. http://hdl.handle.net/10722/207199.

Pełny tekst źródła

Streszczenie:

The thesis report presents the designs of compact planar ultra-wideband (UWB) antennas for wireless devices applications. Three main designs of UWB antennas are studied, namely, single UWB antennas, UWB multiple-input-multiple-out(MIMO)antennas, and transparent UWB antennas on the screens of mobile phones. For single UWB antennas, the designs of two compact planar monopole antennas with compact sizes of 26×28 mm2and 30×39.3mm2are presented. The UWB operations of the antennas are achieved using a ground slot under the feed line, offsetting the feed line and the radiator from the middle of th

Style APA, Harvard, Vancouver, ISO itp.

14

Bowden, Sarah L. "Application of mobile IT in construction." Thesis, Loughborough University, 2005. https://dspace.lboro.ac.uk/2134/794.

Pełny tekst źródła

Streszczenie:

In recent years, the construction industry has been compelled to explore all possible options for improving the delivery of their products and services. Clients are now expecting a better service and projects that meet their requirements more closely. This has challenged the industry to become more efficient, integrated and more attractive, with benefits for its potential workforce and for society as a whole. Information and communication technologies (ICT) are an enabler to facilitate the improvements required for modernisation. However, due to the geographically dispersed and nomadic nature

Style APA, Harvard, Vancouver, ISO itp.

15

Mony, Madeleine. "Reprogrammable optical phase array." Thesis, McGill University, 2007. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=103276.

Pełny tekst źródła

Streszczenie:

The evolving needs of network carriers are changing the design of optical networks. In order to reduce cost, latency, and power consumption, electrical switches are being replaced with optical switching fabrics at the core of the networks. An example of such a network is an Agile All-Photonic Network (AAPN).<br>This thesis presents a novel device that was designed to operate as an optical switch within the context of an AAPN network. The device is a Reprogrammable Optical Phase Array (ROPA), and the design consists of applying multiple electric fields of different magnitudes across an electro-

Style APA, Harvard, Vancouver, ISO itp.

16

Huang, Hong. "Hybrid and resilient WDM mesh optical networks." Diss., Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/15751.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

17

Tan, Junyi, and 譚軍毅. "Investigation of novel liquid desiccant cooling system." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2009. http://hub.hku.hk/bib/B42664251.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

18

Sun, Yiye, and 孫憶業. "Design of UWB and multiple-band monopole antennas for body-centric wireless communications." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2014. http://hdl.handle.net/10722/207208.

Pełny tekst źródła

Streszczenie:

This thesis presents the designs of Ultra-wideband (UWB) monopole antennas, textile monopole antennas and transparent UWB textile antennas using planar technology for body-centric wireless communications (BCWC). A planar antenna designed using offset-fed and slotted ground plane to extend the operating bandwidth for the industrial, scientific and medical (ISM)band and UWB is proposed. Results show that the antenna can achieve a bandwidth from 2.38 to 14.5 GHz with omni-directional radiation patterns in the E-plane. Agroup of nine planar UWB monopole antennas using different radiator shapes

Style APA, Harvard, Vancouver, ISO itp.

19

Zaerr, Jon Benjamin 1963. "Development and evaluation of a dynamic phantom using four independently perfused in vitro kidneys as a tool for investigating hyperthermia systems." Thesis, The University of Arizona, 1989. http://hdl.handle.net/10150/291341.

Pełny tekst źródła

Streszczenie:

A dynamic phantom for use in investigating hyperthermia heating systems has been designed, constructed, and tested. A computer controlled the flow rate of 80% Ethanol to each of 4 preserved in vitro canine kidneys which acted as the phantom material. The flow rates were regulated with stepper motor controlled valves and measured with flow meters by the computer. This provided a flexible system for adjusting the perfusion as desired. The system was tested with step and ramp changes in perfusion under constant power ultrasound and with a temperature controlled perfusion algorithm, all of which y

Style APA, Harvard, Vancouver, ISO itp.

20

Chang, Jae Joon. "CMOS differential analog optical receivers with hybrid integrated I-MSM detector." Diss., Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/14998.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Imam, Neena. "Analysis, design, and testing of semiconductor intersubband devices." Diss., Georgia Institute of Technology, 2002. http://hdl.handle.net/1853/15664.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

22

Fitzgerald, Nicholas B. "The Small Volume Autonomous Water Sampler (SVAWS): An Innovative, Cost- Effective, Adaptable Protocol." PDXScholar, 2014. https://pdxscholar.library.pdx.edu/open_access_etds/1533.

Pełny tekst źródła

Streszczenie:

As of 2007, U.S. pesticide use stood at 1.1 billion pounds with 80% of all usage in agriculture. Such realities pose a potentially dangerous threat to our surface water bodies. This research provides a detailed analysis of the design, operation and field testing of a prototype water sampler, the Small Volume Autonomous Water Sampler (SVAWS). The research includes a discussion of the design and construction of the SVAWS. Seven USGS employees operated the SVAWS in a number of different states and conditions in order to collect samples for pesticide analysis. Field-testing outcomes of the SVAWS w

Style APA, Harvard, Vancouver, ISO itp.

23

Peterson, Zachariah Marcus. "Physical and Electrical Characterization of Triethanolamine Based Sensors for NO₂ Detection and the Influence of Humidity on Sensing Response." PDXScholar, 2011. https://pdxscholar.library.pdx.edu/open_access_etds/418.

Pełny tekst źródła

Streszczenie:

Triethanolamine (TEA) is a semiconducting polymer which exhibits a resistance change when exposed to various gases. The polymer also exhibits a number of reactions with nitrogen dioxide, with the reaction products being heavily dependent on the presence or absence of water vapor. Previous studies have attempted the incorporation of a TEA-carbon nanoparticle composite as the active sensing layer in a chemresistive sensor for detection of NO₂. The incorporation of carbon nanoparticles in the polymer nanocomposite was thought to amplify the sensor's response. There are a number of chemical reacti

Style APA, Harvard, Vancouver, ISO itp.

24

Rosado-Bonilla, Mireilly Ann. "Everyday Performances in U.S. Household Kitchens." Thesis, University of North Texas, 2015. https://digital.library.unt.edu/ark:/67531/metadc804951/.

Pełny tekst źródła

Streszczenie:

BMA Innovation Consulting is committed to serving consumers products that can play a more meaningful role in household cleaning. So far, their innovation department has used psychology-based principles and approaches that have helped them understand consumers’ preferences, attitudes and claimed needs in household cleaning. That said, little information has been collected on the active role that products play or could play as participants in the everyday dynamics of US consumers. An anthropological approach to the study of U.S. kitchens, as an important center of family interaction in U.S. hous

Style APA, Harvard, Vancouver, ISO itp.

25

Dody, Joseph W. "Study of biomass combustion characteristics for the development of a catalytic combustor/gasifier." Thesis, Virginia Tech, 1985. http://hdl.handle.net/10919/43039.

Pełny tekst źródła

Streszczenie:

The research reported here explored, a "new" approach to biomass energy conversion for small-scale process heat-applications. The conversion process uses close-coupled catalytic. combustion to burn combustibles in effluent generated by primary combustion or gasification of biomass fuels. Computer control of primary and secondary air flow rates allow control of the devices output power while maintaining fuel-lean or stoichiometric conditions in the effluent entering the catalytic combustion zone. The intent of the secondary combustion system is to ensure "clean" exhaust (i.e., promote complete

Style APA, Harvard, Vancouver, ISO itp.

26

Deo, Nitin. "Completion and validation of the design of a reconfigurable image processing board." Thesis, Virginia Polytechnic Institute and State University, 1985. http://hdl.handle.net/10919/53064.

Pełny tekst źródła

Streszczenie:

Starting in September 1984, the Telesign project is an extensive and complex project proposed and undertaken by Dr. Nadler at Virginia Tech. The emphasis of this project is to enable the members of the deaf community to communicate visually using sign language or lip reading over the telephone network. The Image Processing Board (IPB) is the 'Brain' of the whole system. The IPB processes a given frame of an image to transmit only selected data. It uses the pseudo-laplacian operator, invented by Dr. Nadler, for edge detection. According to a recent survey of various edge detection algorithms

Style APA, Harvard, Vancouver, ISO itp.

27

Xing, Chengwen, and 邢成文. "Linear minimum mean-square-error transceiver design for amplify-and-forward multiple antenna relaying systems." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2010. http://hub.hku.hk/bib/B44769738.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

28

Mach, Phillip M. "Design Considerations and Implementation of Portable Mass Spectrometers for Environmental Applications." Thesis, University of North Texas, 2017. https://digital.library.unt.edu/ark:/67531/metadc984177/.

Pełny tekst źródła

Streszczenie:

Portable mass spectrometers provide a unique opportunity to obtain in situ measurements. This minimizes need for sample collection or in laboratory analysis. Membrane Inlet Mass Spectrometry (MIMS) utilizing a semi permeable membrane for selective rapid introduction for analysis. Polydimethylsiloxane membranes have been proven to be robust in selecting for aromatic chemistries. Advances in front end design have allowed for increased sensitivity, rapid sample analysis, and on line measurements. Applications of the membrane inlet technique have been applied to environmental detection of clandest

Style APA, Harvard, Vancouver, ISO itp.

29

Pietersen, Richard Gordon. "Thermoelectric cooling for microwave transmitters located at remote sites." Thesis, Cape Technikon, 1992. http://hdl.handle.net/20.500.11838/2158.

Pełny tekst źródła

Streszczenie:

Thesis (MDiploma (Mechanical Engineering))--Cape Technikon, 1992.<br>An investigation into the use of thermoelectric cooling energised by photovoltaic (PV) panels for removing sensible heat from electronic telecommunications equipment. The thermoelectric cooler consists of a solid-state heat pump which operates on the principle of the Peltier effect. The thermoelectric device transfers heat through a cold sink to ambient outside air via a hot sink. A major prerequisite was that the system should be selfsufficient in terms of power because the sites for the microwave transmitters are o

Style APA, Harvard, Vancouver, ISO itp.

30

Gurganus, Heath Alan. "Battery Energy Storage Systems to Mitigate the Variability of Photovoltaic Power Generation." PDXScholar, 2013. https://pdxscholar.library.pdx.edu/open_access_etds/1495.

Pełny tekst źródła

Streszczenie:

Methods of generating renewable energy such as through solar photovoltaic (PV) cells and wind turbines offer great promise in terms of a reduced carbon footprint and overall impact on the environment. However, these methods also share the attribute of being highly stochastic, meaning they are variable in such a way that is difficult to forecast with sufficient accuracy. While solar power currently constitutes a small amount of generating potential in most regions, the cost of photovoltaics continues to decline and a trend has emerged to build larger PV plants than was once feasible. This has b

Style APA, Harvard, Vancouver, ISO itp.

31

Hillig, Mark Alexander. "Automated Channel Assessment for Single Chip MedRadio Transceivers." PDXScholar, 2013. https://pdxscholar.library.pdx.edu/open_access_etds/1005.

Pełny tekst źródła

Streszczenie:

Modern implantable and body worn medical devices leverage wireless telemetry to improve patient experience and expand therapeutic options. Wireless medical devices are subject to a unique set of regulations in which monitoring of the available frequency spectrum is a requirement. To this end, implants use software protocols to assess the in-band activity to determine which channel should be used. These software protocols take valuable processing time and possibly degrade the operational lifetime of the battery. Implantable medical devices often take advantage of a single chip transceiver as th

Style APA, Harvard, Vancouver, ISO itp.

32

Kwiatkowski, Terese Marie. "The miniature electrical cone penetrometer and data acquisition system." Thesis, Virginia Polytechnic Institute and State University, 1985. http://hdl.handle.net/10919/90934.

Pełny tekst źródła

Streszczenie:

The static cone penetrometer is an in-situ testing tool which was originally developed to derive information on soil type and soil strength. More recently, it has found application in liquefaction assessment. Typical cone penetrometers are heavy duty devices which are operated with the assistance of a drill rig. However, this capacity is not necessary in the case of field studies of liquefaction, since liquefaction usually occurs at relatively shallow depths. This thesis is directed to the goal of the development of a miniature, lightweight cone penetrometer which can be used in earthquake rec

Style APA, Harvard, Vancouver, ISO itp.

33

Thakare, Aditya. "A Study of Microwave curing of Underfill using Open and Closed microwave ovens." PDXScholar, 2015. https://pdxscholar.library.pdx.edu/open_access_etds/2246.

Pełny tekst źródła

Streszczenie:

As the demand for microprocessors is increasing with more and more consumers using integrated circuits in their daily life, the demand on the industry is increasing to ramp up production. In order to speed up the manufacturing processes, new and novel approaches are trying to change certain aspects of it. Microwaves have been tried as an alternative to conventional ovens in the curing of the polymers used as underfills and encapsulants in integrated circuits packages. Microwaves however being electromagnetic waves have non uniform energy distribution in different settings, causing burning or i

Style APA, Harvard, Vancouver, ISO itp.

34

Brinkman, Karen L. "Design of a microcomputer-based open heart surgery patient monitor." Thesis, Virginia Polytechnic Institute and State University, 1985. http://hdl.handle.net/10919/76031.

Pełny tekst źródła

Streszczenie:

A patient monitor device for use during open heart surgery has been designed and constructed. The device uses a VIC 20 microcomputer along with some additional circuitry to monitor 3 separate functions. The first patient variable monitored is the blood flow rate through the extracorporeal blood circuit during surgery. The device also continuously monitors and displays 6 separate temperatures. Finally, 3 individual timers are monitored and displayed with the device. Both the hardware and the software used in the design are fully described.<br>Master of Science

Style APA, Harvard, Vancouver, ISO itp.

35

Drkošová, Dominika. "Porovnání vybraných cenových podílů u energeticky úsporných domů." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2018. http://www.nusl.cz/ntk/nusl-382184.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

36

Zimmerman, Nicole P. "Time-Variant Load Models of Electric Vehicle Chargers." PDXScholar, 2015. https://pdxscholar.library.pdx.edu/open_access_etds/2297.

Pełny tekst źródła

Streszczenie:

In power distribution system planning, it is essential to understand the impacts that electric vehicles (EVs), and the non-linear, time-variant loading profiles associated with their charging units, may have on power distribution networks. This research presents a design methodology for the creation of both analytical and behavioral models for EV charging units within a VHDL-AMS simulation environment. Voltage and current data collected from Electric Avenue, located on the Portland State University campus, were used to create harmonic profiles of the EV charging units at the site. From these p

Style APA, Harvard, Vancouver, ISO itp.

37

Suchánek, Jiří. "Energocentrum - vybrané části STP." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225621.

Pełny tekst źródła

Streszczenie:

Master thesis Energy centre - selected parts of building technology project is solving problems connected with technological issues from the construction work supplier point of view. This thesis concerns such a parts as financial, timing and preparations are. Material used as a base was a master thesis of the student from Civil engineering department.

Style APA, Harvard, Vancouver, ISO itp.

38

Vosmík, Jan. "Rekonstrukce víceúčelového zařízení - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240410.

Pełny tekst źródła

Streszczenie:

This thesis handles the construction and technological project of reconstruction of the Multipurpose Facility Construction in the village Slavice. The work is handled by a complete studies realization, including execution time and financial plan. Work also includes technological specification for the main building, inspection and test quality plan and a proposal for major construction machines and mechanisms. It is also a proposal of building equipment, and a plan for securing material resources.

Style APA, Harvard, Vancouver, ISO itp.

39

Chai, Yi, and Zhenqing Gao. "Product-Service System Innovation in Urban Mining-A case study with Volvo CE." Thesis, Blekinge Tekniska Högskola, Institutionen för maskinteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:bth-5471.

Pełny tekst źródła

Streszczenie:

Volvo Construction Equipment (Volvo CE) is one of the world's largest manufacturers of construction machines. Now they want to access a sustainability-focused mining field – urban mining. This study is to find a solution helping Volvo CE quickly access to urban mining with a Product-Service System (PSS) development concept. To do this, the authors completed surveys and several interviews with construction companies, to understand the user and customer needs. The authors also go through a functional analysis on a new prototype of their collaboration partner - Stanford University. The resul

Style APA, Harvard, Vancouver, ISO itp.

40

Kroulíková, Anna. "Porovnání výše cenových podílů jednotlivých konstrukcí budov pro bydlení na celkové ceně uvedené v cenovém předpisu a stanovené položkovým rozpočtem." Master's thesis, Vysoké učení technické v Brně. Ústav soudního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-232775.

Pełny tekst źródła

Streszczenie:

This thesis presents a comparison of the amount of the price of shares of construction of buildings for housing in the total price quoted in the Price Regulation and set an itemized budget. At the beginning of the thesis describes the methods of valuation of houses cost method and procedure for determining the price of shares and adjustment of structures and equipment. Based on itemized budgets family home, according to the chosen methodology used price shares structures and equipment that are matched with shares pricing structures and equipment by Decree No. 3/2008 Coll. The aim of this thesi

Style APA, Harvard, Vancouver, ISO itp.

41

Lebruška, Jakub. "Stavebně technologická příprava Penzionu Jánský Potok II." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392044.

Pełny tekst źródła

Streszczenie:

The subject of this diploma thesis is technological preparation of realization guest – house Jánský potok II. in Jánské Lázně. The diploma thesis contains study of the main technological phases of the object, project of the site equipment, useful machines, time schedule, budget, technological prescription for reinforced concrete construction, project of the formwork for wall and floor slab, control plan, project of the acces road and parking. The basis for technological preparation in this diploma thesis is design documentation.

Style APA, Harvard, Vancouver, ISO itp.

42

Lukešová, Edita. "Lékařský dům ve Zlíně - příprava a organizace výstavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226992.

Pełny tekst źródła

Streszczenie:

Diploma thesis contains descriptions of technological process of Medical House Kotěrova. The project includes a technical report for masonry and monolithic constructions, mechanization plans, safety and guality of work, report scheduling and organization of construction.

Style APA, Harvard, Vancouver, ISO itp.

43

Riddell, Kevin Donald Alexander. "Design, testing and demonstration of a small unmanned aircraft system (SUAS) and payload for measuring wind speed and particulate matter in the atmospheric boundary layer." Thesis, Arts and Science, 2014. http://hdl.handle.net/10133/3416.

Pełny tekst źródła

Streszczenie:

The atmospheric boundary layer (ABL) is the layer of air directly influenced by the Earth’s surface and is the layer of the atmosphere most important to humans as this is the air we live in. Methods for measuring the properties of the ABL include three general approaches: satellite-based, ground- based and airborne. A major research challenge is that many contemporary methods provide a restricted spatial resolution or coverage of variations of ABL properties such as how wind speed varies across a landscape with complex topography. To enhance our capacity to measure the properties of the ABL, t

Style APA, Harvard, Vancouver, ISO itp.

44

Dražilová, Michaela. "Stavebně technologický projekt výstavby polyfunkčního domu v ulici Opuštěná, Brno." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226511.

Pełny tekst źródła

Streszczenie:

Project of master thesis solves brand new residential polyfunctional house with bike shop. The main object is a four-storyed, designed as a monolithic skeleton construction. The building is located in Opuštěná Street, Brno. The project is developed on the basis of project documentation and technical data, delivered by the designer in the behalf of investor requirements. Main goal of this project seeks to approach to real solution of the construction site. It is very important to compare also financial aspects, not only the technological. Last but not least, time requirements of construction pl

Style APA, Harvard, Vancouver, ISO itp.

45

Podškubka, Martin. "Stavebně technologický projekt rezidenčního domu v Brně." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372035.

Pełny tekst źródła

Streszczenie:

The subject of this Diploma thesis is building and technological project of a residential house in Brno, which contain the implementation of the underground car park and residential building, which has three above-ground floors. Attention is focused mainly on the technological processes of bottom building. Text section contains the technical report on the structural and technological project, study implementation of major technological stages of building, technical report of construction site equipment, technological regulations, inspection and test plan, study of noise, plan health and safety

Style APA, Harvard, Vancouver, ISO itp.

46

Slováček, Ondřej. "Stavebně technologický projekt polyfunkčního domu Sokolská 5 v Olomouci." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372119.

Pełny tekst źródła

Streszczenie:

The subject of this diploma thesis is the elaboration of the building project of Polyfunkční dům Sokolská 5. In the course of the diploma thesis is elaborated a summary technical report, report of building site and drawings for individual stages. The implementation of the waterproofing of the base structure and the reinforced concrete monolithic skeleton are subject to technological regulations and control and test plans. In this work the object time and financial plan, the use of machines and mechanisms and health and safety at work are also solved. For the main building objects, an item budg

Style APA, Harvard, Vancouver, ISO itp.

47

Drexler, Michal. "Bytový dům Olomouc, Nezvalova ulice, stavebně technologická příprava stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-239960.

Pełny tekst źródła

Streszczenie:

As the basis of this diploma thesis served a project of a flat house in Nezvalova Street. This flat house is designed as 7 floors high building with undergrounds garages and commercial space in the ground floor. Foundation of this building is done using reinforced concrete pilots, continued by monolithic reinforced concrete scelet. Both circumferential casing and internal walls are built using ceramic concrete blocks Porotherm, on top of which is a layer contact insulation system from EPS. Roofing of this building is done using asphalt bands into flat roof; one part of the roof is designed as

Style APA, Harvard, Vancouver, ISO itp.

48

Kopecký, Ladislav. "Polyfunkční dům Brno Gajdošova, stavebně technologická příprava stavby." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265342.

Pełny tekst źródła

Streszczenie:

The diploma thesis deals with the building-technology construction preparation of the Multifunctional House Brno Gajdošova. The paper contains the technical report concerning this building; coordination of building situation; time and financial plan of the construction; study of the main technological stages; equipment project; design of major building machinery and mechanisms; schedule of the main construction building; technological regulations for making of the monolithic panel and the green flat roof; inspection and test plans in accordance with these regulations. Furthermore, two technolo

Style APA, Harvard, Vancouver, ISO itp.

49

Štěrba, Marek. "Sadová, Bytový dům M1 - stavebně technologický projekt." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372154.

Pełny tekst źródła

Streszczenie:

The aim of the diploma thesis is construction-technological project of the whole construction focusing on the main building object - Apartment building, which is based on large-diameter drilling piles. The basis of the work is the budget of the main building and its timetable. Part of the thesis is a solution of organization of construction and design of building site equipment, technological regulation of selected activities, quality control and solution of transport relations including oversized transport. In addition, the design of the machine assembly, assessment of lifting mechanisms, saf

Style APA, Harvard, Vancouver, ISO itp.

50

Harutunian, Vigain. "Functional model and second law analysis method for energy efficient process design: applications in HVAC systems design." Thesis, 2003. http://hdl.handle.net/2152/635.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!