Zaloguj się

Gotowe bibliografie tematyczne / Interim acrylic prosthesis / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Interim acrylic prosthesis.

Artykuły w czasopismach na temat „Interim acrylic prosthesis”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 38 najlepszych artykułów w czasopismach naukowych na temat „Interim acrylic prosthesis”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Wilson, Teena, Vivek V. Nair, Harshakumar K, and Prasanth V. "Prosthetic rehabilitation with implant-supported fixed prosthesis in a completely edentulous patient: A clinical report." IP Annals of Prosthodontics and Restorative Dentistry 9, no. 2 (2023): 111–16. http://dx.doi.org/10.18231/j.aprd.2023.023.

Pełny tekst źródła

Streszczenie:

To present clinical strategies for prosthetic rehabilitation of completely edentulous patients using immediate-loading basal implants. A 58-year-old female patient was referred to the Department of Prosthodontics for restoration of her completely edentulous maxilla and mandible with a fixed full-arch implant-prosthetic rehabilitation. Since the patient lacks adequate bone in the posterior maxilla and is not willing to undergo a removable interim prosthesis, an immediate loading protocol along with 8 single-piece basal implants, including 2 pterygoid implants in the maxillary arch and 6 single-

Style APA, Harvard, Vancouver, ISO itp.

2

Bukhari, Sarah A., Abdulaziz AlHelal, Periklis Proussaefs, Antoanela Garbacea, and Mathew T. Kattadiyil. "Use of Patient's Own Natural Teeth as Part of the Interim Prosthesis on Immediately Placed Single Implants in a Staged Surgical Approach: A Clinical Report." Journal of Oral Implantology 44, no. 5 (2018): 351–57. http://dx.doi.org/10.1563/aaid-joi-d-17-00292.

Pełny tekst źródła

Streszczenie:

A technique is described where the tooth's natural crown is used as part of the interim implant supported prosthesis in clinical situations where a tooth with poor prognosis is extracted and an implant is placed immediately after tooth extraction. A preliminary impression is made before tooth extraction, and the exact tooth positioning is assessed in the laboratory as part of the treatment plan. An acrylic resin repositioning jig is fabricated that will guide the clinician in seating and orienting the crown intraorally after implant placement is completed. After the natural tooth is extracted

Style APA, Harvard, Vancouver, ISO itp.

3

Venezia, Pietro, Ferruccio Torsello, Vincenzo Santomauro, Vittorio Dibello, and Raffaele Cavalcanti. "Full Digital Workflow for the Treatment of an Edentulous Patient with Guided Surgery, Immediate Loading and 3D-Printed Hybrid Prosthesis: The BARI Technique 2.0. A Case Report." International Journal of Environmental Research and Public Health 16, no. 24 (2019): 5160. http://dx.doi.org/10.3390/ijerph16245160.

Pełny tekst źródła

Streszczenie:

Purpose: To describe a technique intended to transfer of the intermaxillary and occlusal relationships in a fully digital environment from a complete denture to an implant-supported 3D-printed hybrid prosthesis (an acrylic resin complete fixed dental prosthesis supported by implants). Methods: In edentulous cases, the physiological mandibular position should be determined before the immediate loading procedures. In some cases, the use of interim removable prostheses for a few weeks could be useful to test the new occlusion in centric relation and to verify the prosthetic project. When the corr

Style APA, Harvard, Vancouver, ISO itp.

4

Verri, Fellippo Ramos, Eduardo Piza Pellizzer, José Vitor Quinelli Mazaro, Erika Oliveira de Almeida, and Rosse Mary Falcón Antenucci. "Esthetic Interim Acrylic Resin Prosthesis Reinforced with Metal Casting." Journal of Prosthodontics 18, no. 6 (2009): 541–44. http://dx.doi.org/10.1111/j.1532-849x.2009.00477.x.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Campaner, Larissa Mendes, Marcos Paulo Motta Silveira, Guilherme Schmitt de Andrade, et al. "Influence of Polymeric Restorative Materials on the Stress Distribution in Posterior Fixed Partial Dentures: 3D Finite Element Analysis." Polymers 13, no. 5 (2021): 758. http://dx.doi.org/10.3390/polym13050758.

Pełny tekst źródła

Streszczenie:

Background: This study evaluated the effect of interim restorative materials (acrylic resin (AR), resin composite (RC) or polyetheretherketone (PEEK) for dental computer-aided design/computer-aided manufacturing (CAD/CAM)) on the stress distribution of a posterior three-unit fixed partial denture. Methods: The abutment teeth (first molar and first premolar) were modeled using the BioCAD protocol containing 1.5 mm of axial reduction and converging axial walls. A static structural analysis was performed in the computer-aided engineering software, and the Maximum Principal Stress criterion was us

Style APA, Harvard, Vancouver, ISO itp.

6

Ayinala, Mounika, and Gautam Shetty. "Rehabilitation of Maxillary Defect Using Zygomatic Implant Retained Obturator." Case Reports in Dentistry 2021 (October 13, 2021): 1–5. http://dx.doi.org/10.1155/2021/2391331.

Pełny tekst źródła

Streszczenie:

Tumors involving the hard palate, maxillary sinus, or nasal cavity require maxillectomy based on the extent of the lesion. Lack of these boundaries affects the speech, esthetics, and masticatory function. Prosthetic rehabilitation of these defects can be done utilizing zygomatic implants. This present case describes the use of a zygomatic implant to retain a maxillary obturator in a 22-year-old male patient following partial maxillectomy (Brown’s Class 2b) due to odontogenic myxoma. A surgical obturator was secured in position subsequent to the implant placement. Following the healing period,

Style APA, Harvard, Vancouver, ISO itp.

7

Neves, Flávio Domingues das, Clébio Domingues Silveira-Júnior, Vitor Coró, João Paulo Silva-Neto, Paulo Cézar Simamoto-Júnior, and Célio Jesus do Prado. "Gingival Conditioning in an Implant-Supported Prosthesis: A Clinical Report." Journal of Oral Implantology 39, no. 4 (2013): 483–85. http://dx.doi.org/10.1563/aaid-joi-d-10-00199.

Pełny tekst źródła

Streszczenie:

The loss of gingival volume is a major challenge for dental surgeons with implant-supported fixed prosthesis manufactures, particularly from an aesthetics perspective in patients with a high smile line. Gingival tissue remodeling can help in papillae formation to avoid soft tissue surgery by reestablishing the appropriate shape and gingival contour of the tissues. This improves not only the aesthetics, but also the phonetics of the patient. This paper describes a clinical case of gingival conditioning obtained with interim implant-supported fixed partial dentures via incremental addition and a

Style APA, Harvard, Vancouver, ISO itp.

8

Algabri, Radhwan, Sadeq Altayyar, Ahmed Yaseen Alqutaibi, Hanan Aboalrejal, and Abdalhaq Alhasani. "Fabrication of an interim buccal-retaining flange obturator for a patient undergoing partial maxillectomy." Saudi Journal of Oral Sciences 11, no. 2 (2024): 141–45. http://dx.doi.org/10.4103/sjoralsci.sjoralsci_18_24.

Pełny tekst źródła

Streszczenie:

Abstract Prosthodontic treatment of palatal defects focuses on closing oronasal communication and improving masticatory function, speech, esthetics, and comfort. The most difficult aspect of rehabilitating patients with hemimaxillectomy is ensuring the prosthesis has enough retention and stability. During healing, a simpler design and effective retention should adequately meet the patient’s functional requirements. This case report presents the fabrication of an interim cost-effective and retentive buccal flange palatal obturator for a 65-year-old male patient who had an acquired maxillary def

Style APA, Harvard, Vancouver, ISO itp.

9

Islam, Md Saiful, Md Zahedul Islam Nizami, Aleya Begum, Rubaba Ahmed, and Muntasir Al Mamun. "Rehabilitation of the occlusal vertical dimension with an overlay removable partial denturea case report." City Dental College Journal 9, no. 1 (2012): 28–31. http://dx.doi.org/10.3329/cdcj.v9i1.11835.

Pełny tekst źródła

Streszczenie:

Loss of occlusal vertical dimension is a frequently observed problem in the middle aged and aged population who intends to retain their natural dentition. This type of patient has very few treatment options one of which is overdenture. In this case report, a patient was treated with overlay removable partial denture for restoring the lost vertical dimension. This was provided as interim prosthesis. The follow up was done to observe the fulfillment of desired results. The clinical and laboratory procedure is described briefly. The treatment used for this case is cost effective and conservative

Style APA, Harvard, Vancouver, ISO itp.

10

Hadi, Hiba Munaf, Ayad I. Haddad, and Firas Abd Kati. "Effect of Ethylmethacrylate and Isobutylmethacrylate on Surface Hardness and Surface Roughness of Heat-Cure Ocular Acrylic Resins." Journal of Techniques 3, no. 4 (2021): 52–57. http://dx.doi.org/10.51173/jt.v3i4.394.

Pełny tekst źródła

Streszczenie:

Background Acrylic resin is a commonly utilized material in clinical practice, including: maxillofacial prosthesis Interim prostheses, repair dentures, reline, orthodontic equipment, and record bases are only a few examples of possible applications. However, these materials have some drawbacks, for example low mechanical properties. To improve the performance of the acrylic resins, various materials have been incorporated. Purpose: The purpose of this research is to assess the effects of adding different concentrations of copolymers of Ethyl methacrylate (EA) and Isobutyl methacrylate (IBMA) m

Style APA, Harvard, Vancouver, ISO itp.

11

Alshahrani, Faris A., Shorouq Khalid Hamid, Lujain Ali Alghamdi, et al. "Impact of Polymerization Technique and ZrO2 Nanoparticle Addition on the Fracture Load of Interim Implant-Supported Fixed Cantilevered Prostheses in Comparison to CAD/CAM Material." Dentistry Journal 10, no. 6 (2022): 102. http://dx.doi.org/10.3390/dj10060102.

Pełny tekst źródła

Streszczenie:

ZrO2 nanoparticles (ZNPs) have excellent physical properties. This study investigated the fracture load of implant-supported, fixed cantilevered prosthesis materials, reinforced with ZNPs and various polymerization techniques, compared with conventional and CAD/CAM materials. Sixty specimens were made from two CAD/CAM; milled (MIL) (Ceramill TEMP); and 3D-printed (NextDent Denture 3D+). Conventional heat-polymerized acrylic resin was used to fabricate the other specimens, which were grouped according to their polymerization technique: conventionally (HP) and autoclave-polymerized (AP); convent

Style APA, Harvard, Vancouver, ISO itp.

12

Aradya, Anupama, Narahari Ranganatha, Sreeshyla HS, and Giriraj Sandeep. "Fabrication of single piece definitive obturator for post surgical maxillectomy defect during covid-19 pandemic- A Literature review with Clinical case report." Bangladesh Journal of Medical Science 21, no. 4 (2022): 676–84. http://dx.doi.org/10.3329/bjms.v21i4.60272.

Pełny tekst źródła

Streszczenie:

Background: Impacts of primary oncology surgical procedure can impede restoration objectives. Restoring oral function, comfort and aesthetics is a challenge due to limitations in the restorative treatment options. Methodology: Literature review on the responsibilities, role of maxillofacial prosthodontist, materails and retentive aids used for prosthesis, classification of maxillofacial prostheses, recent advancements in MFP and Workflow for the fabrication of obturator prostheses in the COVID-19 pandemic scenario. Case report on the fabrication of Holllow bulb definitive obturator during pand

Style APA, Harvard, Vancouver, ISO itp.

13

Петрикас, Олег, Oleg Petrikas, Дмитрий Трапезников, Dmitry TRAPEZNIKOV, Эмилия Змеева, and Emilia Zmeeva. "THE LABORATORY STUDY OF THE FLEXURAL STRENGTH OF REINFORCED BIS-ACRYLIC MATERIAL FOR PROVISIONAL FIXED RESTORATIONS." Actual problems in dentistry 14, no. 4 (2018): 121–26. http://dx.doi.org/10.18481/2077-7566-2018-14-4-121-125.

Pełny tekst źródła

Streszczenie:

Background. The use of provisional (interim, temporary) restorations has become a routine procedure in modern dentists after the end of the era of brazed-stamped bridges. The use of traditional acrylic plastics does not provide the necessary strength for the long-term functioning of provisional prostheses. Bis-acrylic materials have helped to eliminate some of the problems associated with traditional acrylic materials. However the disadvantage of bis-acryls is that they can break relatively easily when placed in areas of increased stress. The use of provisional prostheses, obtained by casting

Style APA, Harvard, Vancouver, ISO itp.

14

Lorenzi, Claudia, Fabrizio Lio, Piero Papi, Vincenzo Mazzetti, Andrea Laureti, and Claudio Arcuri. "Clinical Reliability of Complete-Arch Fixed Prostheses Supported by Narrow-Diameter Implants to Support Complete-Arch Restorations." Applied Sciences 13, no. 1 (2022): 538. http://dx.doi.org/10.3390/app13010538.

Pełny tekst źródła

Streszczenie:

The aim of this study was to evaluate the clinical application of fixed screw-retained complete-arch rehabilitations supported by four narrow-diameter implants (NDIs). The records of patients treated with complete-arch prostheses screwed onto four NDIs treated with an immediate loading protocol between 2010 and 2020 with at least 1 year of follow-up after the positioning of the definitive restoration were reviewed. The implants were placed according to the final prosthetic design and were immediately loaded. The interim prostheses were replaced after the healing period by definitive acrylic re

Style APA, Harvard, Vancouver, ISO itp.

15

Pantea, Mihaela, Robert Cătălin Ciocoiu, Maria Greabu, et al. "Compressive and Flexural Strength of 3D-Printed and Conventional Resins Designated for Interim Fixed Dental Prostheses: An In Vitro Comparison." Materials 15, no. 9 (2022): 3075. http://dx.doi.org/10.3390/ma15093075.

Pełny tekst źródła

Streszczenie:

A provisionalization sequence is essential for obtaining a predictable final prosthetic outcome. An assessment of the mechanical behavior of interim prosthetic materials could orient clinicians towards selecting an appropriate material for each clinical case. The aim of this study was to comparatively evaluate the mechanical behavior—with compressive and three-point flexural tests—of certain 3D-printed and conventional resins used to obtain interim fixed dental prostheses. Four interim resin materials were investigated: two 3D-printed resins and two conventional resins (an auto-polymerized res

Style APA, Harvard, Vancouver, ISO itp.

16

Petrikas, Oleg, Dmitriy Trapeznikov, Igor Kostin, and Vitaliy Bulanov. "FINITE ELEMENT STUDY EVALUSTION OF GLASS FIBER REINFORCED FIXED PROSTHESES MADE OF ACRYLIC AND BIS-ACRYLIC RESIN MATERIALS." Actual problems in dentistry 20, no. 1 (2024): 170–74. http://dx.doi.org/10.18481/2077-7566-2024-20-1-170-174.

Pełny tekst źródła

Streszczenie:

The use of interim (provisional) prostheses is an obligate stage of modern dental practice. The problem of provisional bridges recognized by most experts is their use under heavy occlusal stress due to the possibility of their fracture. The development of a simple method of reinforcing provisional of prostheses during a clinical appointment that does not require special equipment is an urgent scientific and practical task. Objectives. The goal of this study was to evaluate the stress distribution in fiberglass reinforced and non-reinforced short-span and long-span provisional bridges according

Style APA, Harvard, Vancouver, ISO itp.

17

Qassim Hadi, Maab, and Suha Fadhil Dulaimi. "The effect of thermo-cycling on fracture strength of 3D printing and PMMA interim prostheses." Mustansiria Dental Journal 18, no. 2 (2022): 220–29. http://dx.doi.org/10.32828/mdj.v18i2.924.

Pełny tekst źródła

Streszczenie:

Aim of the study: This study compared the fracture resistance of three-dimensional printing (3D) interim restoration with that polymethylmethacrylate (PMMA), interim restoration. Materials and methods: In the present study upper molar (dentoform) tooth was prepared for full coverage crowns. The prepared model was digitally scanned by extra-oral scanner. Duplication of the master die into metal dies (chrome cobalt alloy). Totally, 40 samples were divided into two groups (20) using 3D printing (asiga dentatooth resin material), and (20) Polymethylmethacrylate PMMA (integra) resin material.

Style APA, Harvard, Vancouver, ISO itp.

18

Drago, Carl. "Cantilever Lengths and Anterior-Posterior Spreads of Interim, Acrylic Resin, Full-Arch Screw-Retained Prostheses and Their Relationship to Prosthetic Complications." Journal of Prosthodontics 26, no. 6 (2016): 502–7. http://dx.doi.org/10.1111/jopr.12426.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Schwedhelm, E. Ricardo. "Direct Technique for the Fabrication of Acrylic Provisional Restorations." Journal of Contemporary Dental Practice 7, no. 1 (2006): 157–73. http://dx.doi.org/10.5005/jcdp-7-1-157.

Pełny tekst źródła

Streszczenie:

Abstract Provisional restorations are fabricated to protect the prepared tooth structure during the period between tooth preparation and insertion of the definitive restoration. These restorations are also referred to in the literature as interim, temporary, or provisional restorations (prostheses). Such restorations should be uncomplicated and inexpensive to fabricate in a short period of time. Several laboratory and clinical techniques for the fabrication of provisional restorations have been described in the literature, such as the indirect technique, direct technique, and indirect-direct t

Style APA, Harvard, Vancouver, ISO itp.

20

Gurung, A., S. R. B. Mathema, B. Maskey, et al. "Prosthetic Management of Post-surgical defect in the Mandible following Marsupialization: A Case Report." Journal of Nepalese Prosthodontic Society 3, no. 2 (2020): 137–41. http://dx.doi.org/10.3126/jnprossoc.v3i2.36392.

Pełny tekst źródła

Streszczenie:

Marsupialization is a conservative surgical approach for the surgical management of large odontogenic lesions. Such procedure often results in a post-surgical defect in the form of an intraoral opening. The patency of such defect, if not maintained can result in food accumulation which may lead to infection and thus delayed healing of the defect. Obturator is one of the modalities to facilitate closure of the resultant defect. This report presents a case where an acrylic plug obturator retained with clasp, was provided to the patient for the interim period following marsupialization on the man

Style APA, Harvard, Vancouver, ISO itp.

21

Pantea, Mihaela, Alexandra Ripszky Totan, Marina Imre, et al. "Biochemical Interaction between Materials Used for Interim Prosthetic Restorations and Saliva." Materials 15, no. 1 (2021): 226. http://dx.doi.org/10.3390/ma15010226.

Pełny tekst źródła

Streszczenie:

The purpose of this study was to analyze the oxidative stress level and inflammatory status of saliva in the presence of certain materials used for obtaining interim prosthetic restorations. Four types of interim resin materials were investigated: a pressure/heat-cured acrylic resin (Superpont C+B, SpofaDental a.s Czech Republic, /KaVo Kerr Group), a milled resin (Telio CAD polymethyl methacrylate, Ivoclar Vivadent AG, Liechtenstein), a 3D printed resin (NextDent C&B MFH, NextDent by 3D Systems, the Netherlands), and a pressure/heat-cured micro-filled indirect composite resin (SR Chromasit

Style APA, Harvard, Vancouver, ISO itp.

22

Martu, Ioana, Carmen Savin, Diana Diaconu-Popa, et al. "Influence of Silver Nanoparticle Integration on the Composition and Surface Properties of Acrylic Dental Resins Employed in Temporary Bridges." Timisoara Medical Journal 2024, no. 2 (2024): 1. http://dx.doi.org/10.35995/tmj20240208.

Pełny tekst źródła

Streszczenie:

Background: Recognized widely for its irreversible effects, periodontal disease stands as one of the most prevalent conditions, particularly emphasizing the potential for permanent damage caused by gingivitis, extending to encompass the entirety of the supportive complex, including the connective tissue and alveolar bone. Patients necessitating comprehensive periodontal and prosthetic treatments require an interdisciplinary approach, involving the coordination of pre-treatment procedures and appropriate prosthetic strategies. The adoption of advanced materials and techniques can prove benefici

Style APA, Harvard, Vancouver, ISO itp.

23

Peñate, Lissethe, Montse Mercade, María Arregui, Miguel Roig, Juan Basilio, and Rosario Cedeño. "Color Stability of CAD/CAM Interim Material for Long-Term Fixed Dental Prostheses vs. Conventional Materials after Immersion in Different Staining Solutions." Journal of Composites Science 5, no. 4 (2021): 106. http://dx.doi.org/10.3390/jcs5040106.

Pełny tekst źródła

Streszczenie:

The color stability of interim computer-aided design and computer-assisted manufacturing (CAD/CAM) materials has not been exhaustively investigated. The aim of this study was to compare the translucency (TP) and contrast ratio (CR) of CAD/CAM blocks and conventional interim materials, as well as the effects of varnish application and tooth-brushing on color stability after immersion in different staining solutions. Four hundred and eighty specimens were fabricated with four different interim materials (n = 120) and were divided into three experimental, and one control group (n = 30). The color

Style APA, Harvard, Vancouver, ISO itp.

24

Misra, Sumit Kumar, Itishree Pradhan, Devendra Chopra, and Abhishek Gaur. "A customized occlusal plane device for immediate denture patient." Asian Journal of Oral Health and Allied Sciences 15 (April 15, 2025): 6. https://doi.org/10.25259/ajohas_19_2024.

Pełny tekst źródła

Streszczenie:

The study focuses on developing a simple, easy-to-construct, sterilizable, and customizable occlusal plane device. With the increasing preference for immediate dentures in dentistry, ensuring an accurate occlusal plane orientation is crucial for achieving proper function, aesthetics, and form in prosthodontic rehabilitation. Traditionally, a fox plane is used alongside the Camper’s plane or ala-tragus line to determine the occlusal plane. However, accurately assessing the occlusal plane before extracting remaining teeth when fabricating an interim immediate complete denture is challenging. A c

Style APA, Harvard, Vancouver, ISO itp.

25

Thomé, Eloana, Hyung Joo Lee, Ivete Aparecida de Mattias Sartori, Roseli Latenek Trevisan, Jaques Luiz, and Rodrigo Tiossi. "A randomized controlled trial comparing interim acrylic prostheses with and without cast metal base for immediate loading of dental implants in the edentulous mandible." Clinical Oral Implants Research 26, no. 12 (2014): 1414–20. http://dx.doi.org/10.1111/clr.12470.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

26

Ozan, Oguz, Tolga Pekperdahci, Doruk Kocyigit, and Burak Yilmaz. "A technique to fabricate an interim implant-supported fixed complete denture for immediate loading." Journal of Oral Implantology, August 24, 2020. http://dx.doi.org/10.1563/aaid-joi-d-19-00374.

Pełny tekst źródła

Streszczenie:

Converting an acrylic resin removable complete prosthesis into a fixed implant-supported prosthesis to immediately load the implants can be a challenging procedure. Using acrylic resin to secure titanium interim copings intraorally may be a difficult task, and any process to facilitate this procedure may be advantageous for the clinician and the patient. This report describes a technique for facilitating the fabrication of an interim immediately loaded implant-supported fixed complete prosthesis. This technique and the materials used enabled the efficient fabrication and delivery of the prosth

Style APA, Harvard, Vancouver, ISO itp.

27

Saran Babu, Dr Kalamalla A., Dr Mahammad Rasool, Dr Dinesh Kumar Perisetty, Dr Ch Sumalatha, Dr E. Srikanth, and Dr Sateesh Babu S. "Definitive Obturator for Class IV Maxillary Defect with Cast Retainers -A Case Report." Global Journal of Medical Research, October 22, 2019, 1–5. http://dx.doi.org/10.34257/gjmrjvol19is4pg1.

Pełny tekst źródła

Streszczenie:

Retention, stability & support are three important factors which determine the basic objectives, success and comfort of any removable prosthesis.In acquired surgical maxillary defects; the degree of impairment, size and location of the defect influences the outcome of the overall prosthetic overhaul.Prosthetic therapy with obturator closes the defect by re-establishing the oro-nasal separation, thereby, improving deglutition, speech and hypernasality. After maxillectomy, 3-6 months after surgery,patients with class 4 maxillary defects complains of frequent loosening of temporary prosthesis

Style APA, Harvard, Vancouver, ISO itp.

28

Shalini, K., S. HaraGopal, Dasari Mounika, and B. Swapna. "COMPARATIVE EVALUATION OF FLEXURAL STRENGTH AND ELASTIC MODULUS OF PROVISIONAL CROWN AND BRIDGE MATERIALS AT DIFFERENT STORAGE INTERVALS." INTERNATIONAL JOURNAL OF SCIENTIFIC RESEARCH, December 1, 2021, 65–68. http://dx.doi.org/10.36106/ijsr/7504647.

Pełny tekst źródła

Streszczenie:

Introduction: Provisional restorations are an integral part of xed prosthesis and dental implantology. They serve as a key role in functional and esthetic tryin for design of nal prosthesis. Fixed prosthesis prognosis depends on the quality of provisional restoration. In long term cases like full mouth rehabilitation and in implant supported prosthesis exural strength (FS) and elastic modulus (EM) of the interim prosthesis play a vital role. Aim: To evaluate and compare the exural strength (FS) and elastic modulus (EM) of provisional crown and bridge materials stored at different time inte

Style APA, Harvard, Vancouver, ISO itp.

29

Nguyen, Phuc Ngoc, Lam Hung Tran, and Viet Hoang. "Full-arch implant-supported rehabilitation using reverse scan technique: A case report." Journal of Oral Implantology, January 7, 2025. https://doi.org/10.1563/aaid-joi-d-24-00083.

Pełny tekst źródła

Streszczenie:

Abstract The reverse scan technique offers several advantages, such as improvements of accuracy and visibility of critical anatomical structures, minimizing chair time, and providing better patient comfort. This was a case report successfully employing the reverse scan technique. A 72-year-old male patient desired to restore his teeth in both jaws, as he experienced difficulty eating and had never worn dentures. Clinical examination revealed the presence of several remaining teeth with poor prognosis due to significant bone loss and mobility. The treatment plan involved extracting these teeth,

Style APA, Harvard, Vancouver, ISO itp.

30

Huard, C., M. Bessadet, E. Nicolas, and JL Veyrune. "A New Procedure Reduces Laboratory Time to 6 Hours for the Elaboration of Immediate Loading Prostheses with a Titanium Frame Following Implant Placement." June 13, 2016. https://doi.org/10.19070/2377-8075-1600054.

Pełny tekst źródła

Streszczenie:

Good primary stability and no micromovements during the healing stage are the two main factors predicting successful osseointegration. Therefore, the international literature on immediate loading emphasizes the importance of using a rigid framework on an interim acrylic prosthesis to bind the implants for 48 to 72 hours after implant placement. This report describes the procedure of the Euroteknika “all in bar” system which can shorten this time to 6 hours. The cast was prepared with the abutment replica and mounted on an articulator by the dental laboratory. The abutments with winglets were a

Style APA, Harvard, Vancouver, ISO itp.

31

Joseph, Suja, Nazia Rasheed, Angel M. Joseph, Shibi Mathew, and Joshy P. Abraham. "Rehabilitating a Complex Mid-facial Defect With an Interim, Magnet-Retained, Two-Piece Acrylic Prosthesis: A Case Report." Cureus, April 12, 2025. https://doi.org/10.7759/cureus.82135.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

32

Nagai, Toshiki, Yusuke Kuroda, Natalie Asavanant, Chao‐Chieh Yang, Dean Morton, and Wei‐Shao Lin. "Influence of prosthesis type and intraoral scanner‐based extraoral scanning protocol on the passive fit of CAD‐CAM verification devices." Journal of Prosthodontics, July 6, 2025. https://doi.org/10.1111/jopr.14097.

Pełny tekst źródła

Streszczenie:

AbstractPurposeTo evaluate the impact of different complete‐arch digital scanning techniques and prosthesis types on the passive fit of computer‐aided design and computer‐aided manufacturing (CAD‐CAM) verification devices.Materials and MethodsTwo different maxillary master casts with four multi‐unit abutment (MUA) implant analogs (FP‐1 and FP‐3 prosthesis types) were used as the basis for fabricating verification devices through two impression techniques (OptiSplint and RevEX). Group 1 utilized digital scans of splinted scanbodies reinforced with a light‐polymerizing acrylic resin and metal me

Style APA, Harvard, Vancouver, ISO itp.

33

Surwase, Swateja Kiran, Raghavendra V. Adaki, Dayanand A. Huddar, Banashree S. Sankeshwari, Deepti S. Fulari, and Aditi A. Kanitkar. "Clinical Evaluation of Masticatory Performance of Pre and Post-mandibular Guidance Therapy in Hemi-mandibulectomy Patients: A Quasi-experimental Study." JOURNAL OF CLINICAL AND DIAGNOSTIC RESEARCH, 2024. http://dx.doi.org/10.7860/jcdr/2024/67872.20159.

Pełny tekst źródła

Streszczenie:

Introduction: Surgical removal of the lower jaw is the most common cause of mandibular deviation due to benign or malignant neoplasms. The Palatal Guide Flange Prosthesis (PGFP) is a recommended corrective appliance to reduce this clinical manifestation. The primary goals of rehabilitation with PGFP are to train the mandibular muscles and restore a healthy occlusal relationship so that the patient can effectively control their mouth opening and closing movements. In the present article, the Masticatory Performance (MP) of patients who had undergone hemi-mandibulectomy surgery was evaluated bot

Style APA, Harvard, Vancouver, ISO itp.

34

Asavanant, Natalie, Chao‐Chieh Yang, Hawra AlQallaf, et al. "Effects of complete‐arch digital scanning techniques on the passive fit of CAD‐CAM verification devices." Journal of Prosthodontics, June 19, 2025. https://doi.org/10.1111/jopr.14084.

Pełny tekst źródła

Streszczenie:

AbstractPurposeTo evaluate the impact of different complete‐arch digital scanning techniques on the passive fit of computer‐aided design and computer‐aided manufacturing (CAD‐CAM) verification devices.Materials and MethodsA mandibular master cast with four multiunit abutment implant analogs was used as the basis for fabricating verification devices through three impression techniques. Group 1 employed a conventional open‐tray impression technique using polyvinyl siloxane material, Group 2 utilized digital scans of splinted scanbodies reinforced with a light‐polymerizing acrylic resin and metal

Style APA, Harvard, Vancouver, ISO itp.

35

Elashkar, Mostafa, Yehia Aboushady, Merna Ihab, and Mohamed T. El Halawani. "Evaluation of the marginal fit and fracture resistance of interim restorations fabricated using different techniques: an in vitro study." BMC Oral Health 25, no. 1 (2025). https://doi.org/10.1186/s12903-025-05679-y.

Pełny tekst źródła

Streszczenie:

Abstract Background Interim restorations are essential for preserving structural integrity and function until the definitive restoration is placed. Their mechanical properties and marginal fit are crucial for clinical performance and are influenced by the fabrication technique and material used. Aim The aim of this in vitro study was to investigate the marginal fit and fracture resistance of manually fabricated, computer-aided design and computer-aided manufacturing (CAD/CAM) milled, and CAD/CAM three-dimensionally (3D) printed 3-unit interim fixed dental prostheses (FDPs). Materials and metho

Style APA, Harvard, Vancouver, ISO itp.

36

Polara, Giorgio, Fabio Pistone, and Spedicato Giorgio Alfredo. "Digital immediate tooth restoration: Fabricating acrylic resin interim crowns from CBCT scans for immediate implant-supported prostheses: A case series." Journal of Prosthetic Dentistry, December 2020. http://dx.doi.org/10.1016/j.prosdent.2020.09.042.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

37

Eslemez Topcu, Eda, Onur Şahin, Ayşegül Köroğlu, Füsun Cömert, and Burak Yilmaz. "Surface roughness and Streptococcus mutans adhesion on surface sealant agent coupled interim crown materials after dynamic loading." BMC Oral Health 22, no. 1 (2022). http://dx.doi.org/10.1186/s12903-022-02323-x.

Pełny tekst źródła

Streszczenie:

Abstract Background With the application of surface sealant agents, smooth surfaces can be achieved in a shorter time when compared with conventional polishing. However, studies on the performance of these agents against chewing forces are not many. The purpose of this study was to evaluate the surface roughness and Streptococcus mutans adhesion on surface sealent coupled interim prosthetic materials after chewing simulation. Methods One hundred and twelve specimens were fabricated from two poly(methyl methacrylate) (Tab 2000, Dentalon Plus) and two bis-acryl (Tempofit, Protemp 4) interim crow

Style APA, Harvard, Vancouver, ISO itp.

38

Mazurek-Popczyk, Justyna, Adam Nowicki, Katarzyna Arkusz, Łukasz Pałka, Anna Zimoch-Korzycka, and Katarzyna Baldy-Chudzik. "Evaluation of biofilm formation on acrylic resins used to fabricate dental temporary restorations with the use of 3D printing technology." BMC Oral Health 22, no. 1 (2022). http://dx.doi.org/10.1186/s12903-022-02488-5.

Pełny tekst źródła

Streszczenie:

Abstract Background Temporary implant-retained restorations are required to support function and esthetics of the masticatory system until the final restoration is completed and delivered. Acrylic resins are commonly used in prosthetic dentistry and lately they have been used in three-dimensional (3D) printing technology. Since this technology it is fairly new, the number of studies on their susceptibility to microbial adhesion is low. Restorations placed even for a short period of time may become the reservoir for microorganisms that may affect the peri-implant tissues and trigger inflammatio

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!