Gotowe bibliografie tematyczne / Joint Capacity

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „Joint Capacity”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Joint Capacity”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Joint Capacity"

Guzanová, Anna, Erik Janoško, Dagmar Draganovská, et al. "Investigation of Applicability Flowdrill Technology for Joining Thin-Walled Metal Sheets." Metals 12, no. 4 (2022): 540. http://dx.doi.org/10.3390/met12040540.

Pełny tekst źródła

Streszczenie:

The applicability of flowdrill technology to join steel and aluminum alloys is studied. When used to flowdrill two overlapped thin-walled materials, a joint is formed as a secondary effect. The quality of the resulting bushings forming the interference fit joint was investigated by metallography. The joints were formed using a combination of uncoated deep drawn steel, galvanized high-strength low alloy steel and aluminum alloy, in different positions in the joint. Subsequently, tensile shear testing of single joints was performed. The load-carrying capacity of the joints was also tested in com

Style APA, Harvard, Vancouver, ISO itp.

Herák, D., M. Müller, R. Chotěborský, and O. Dajbych. "Loading capacity determination of the wooden scarf joint." Research in Agricultural Engineering 55, No. 2 (2009): 76–83. http://dx.doi.org/10.17221/22/2008-rae.

Pełny tekst źródła

Streszczenie:

The paper describes the complete derivation of the theoretical bonded scarf joint loading capacity and the construction of the Mohr’s circle for linear state of stress. Then the method of the experimental determination of the bonded joint loading capacity is explained in detail. A part of this paper deals also with the bonded joint real loading capacity determination.

Style APA, Harvard, Vancouver, ISO itp.

Mucha, Jacek, and Waldemar Witkowski. "The Structure of the Strength of Riveted Joints Determined in the Lap Joint Tensile Shear Test." Acta Mechanica et Automatica 9, no. 1 (2015): 44–49. http://dx.doi.org/10.1515/ama-2015-0009.

Pełny tekst źródła

Streszczenie:

Abstract The article presents the analysis of the structure of the load capacity of riveted joints. For the four joining systems the lap joint specimens were made and tested in the shearing test. The joints were prepared for the three combinations of the DC01 steel and EN AW- 5754 aluminium alloy sheets with the thickness of 2mm. On the basis of the obtained load-elongation diagram tensile shear test curves, the basic parameters defined in the ISO/DIS 12996 standard were determined. In the case of the conventional riveted joints the maximum load capacity of the joint is determined by the stren

Style APA, Harvard, Vancouver, ISO itp.

Saremi, Pooya, Wei Lu, Jari Puttonen, Dan Pada, and Jyrki Kesti. "Load-carrying capacity of welded K-type joints inside floor truss systems." Rakenteiden Mekaniikka 52, no. 1 (2019): 38–52. http://dx.doi.org/10.23998/rm.74444.

Pełny tekst źródła

Streszczenie:

The load-carrying capacity of a K-type joint inside a floor truss is studied both experimentally and numerically. The joint tested is a scaled-down, isolated joint. The tubular braces, plate chord, and division plate are made of SSAB Domex steel. Comparison of load displacement curves received by finite element analyses with curves obtained from tests confirms that numerical models describe joint behaviour reasonable. The paper demonstrates that joints with high load-bearing capacity can be investigated experimentally by scaling the dimensions of the joint down when testing devices can affect

Style APA, Harvard, Vancouver, ISO itp.

Janíková, Nikola, Adam Kořený, Milan Gaff, and Josef Hlavatý. "Comparative Study on Strengths of Ready-to-Assemble and Eccentric Furniture Joint." Materials 18, no. 9 (2025): 2114. https://doi.org/10.3390/ma18092114.

Pełny tekst źródła

Streszczenie:

This study compared two groups of furniture joints, i.e., a so-called ready-to-assemble (RTA) plastic biscuit joint from Lamello©, while the second group consists of four types of eccentric joints with beech dowels. L-shaped specimens were prepared with the help of the selected joints and a three-layer particleboard with dimensions of 150 × 150 × 400 mm. These L-shaped specimens were tested for bending moment capacity under compression and under tension. Cam joints with wooden dowels can withstand high stress. If Lamello© Bisco P-15 joints are added to the plastic Clamex P-14 joint, this joint

Style APA, Harvard, Vancouver, ISO itp.

Xiao, Yong, Min Yu, and Wei Liu. "Finite Element Analysis of Prefabricated Semi-Rigid Concrete Beam–Column Joint with Steel Connections." Applied Sciences 14, no. 12 (2024): 5070. http://dx.doi.org/10.3390/app14125070.

Pełny tekst źródła

Streszczenie:

This paper introduces a novel type of prefabricated semi-rigid concrete beam–column joint, aiming to examine its load-carrying capacity and seismic performance in comparison with a traditional cast-in-place joint. This study utilized the ABAQUS 2020 software to establish finite element models for both types of joints and conducted finite element analysis under low circumferential reciprocating displacement loads. When comparing the energy dissipation capacity, ductility, ultimate load-carrying capacity, stress mechanism, and damage mode, a comprehensive evaluation of the two types of joints wa

Style APA, Harvard, Vancouver, ISO itp.

Sun, Huibin, Wei Lu, Jiancai Wang, et al. "Comparative Study on Compressive and Flexural Properties of Concrete-Filled Steel Tubular Arch Joints." Sustainability 14, no. 14 (2022): 8916. http://dx.doi.org/10.3390/su14148916.

Pełny tekst źródła

Streszczenie:

Studying the bearing mechanism of concrete-filled steel tubular (CFST) arch components and constructing the quantitative design method of the CFST arch is an important subject in underground support. In order to clarify the bending and compression properties of CFST arch joints, considering different structural parameters of the joint, bending and compression tests of square CFST components without joints, with tubular joints and with flange joints were carried out. The mechanical properties and failure modes of the bending and compression combinations of each component were analyzed, and the

Style APA, Harvard, Vancouver, ISO itp.

Zhu, Jia Ning, Ke Jia Yang, Xiao Wen Li, and Rui Wen Li. "The Anti-Shear Capacity of Abnormal Joint of Steel Reinforced Concrete." Applied Mechanics and Materials 357-360 (August 2013): 863–68. http://dx.doi.org/10.4028/www.scientific.net/amm.357-360.863.

Pełny tekst źródła

Streszczenie:

The paper presents an test and computational results of finite element studies on the behavior and capacity of abnormal exterior joints of Steel Reinforced Concrete (SRC) column and Reinforced Concrete (RC) beam. The critical parameters influencing Anti-Shear Capacity are analyzed by ABAQUS, such as the eccentricity of column section, the steel ratio of the joint core zone, the concrete strength and the axial compression ratio and so on. As a result, the Anti-Shear capacity of the joints mainly depends on “the minor joint zone”. The calculating formula of Anti-Shear capacity of the joints, wit

Style APA, Harvard, Vancouver, ISO itp.

Malhotra, S. K., and B. Thomas. "Effect of interface gap on load–slip characteristics of timber joints fabricated with multiple nails." Canadian Journal of Civil Engineering 12, no. 1 (1985): 104–13. http://dx.doi.org/10.1139/l85-011.

Pełny tekst źródła

Streszczenie:

An experimental program, exploratory in nature, has been carried out to investigate the effect of interface gap on the load–slip behaviour of joints fabricated with multiple nails. In total, 320 joint specimens have been tested. Modification factors are developed to account for the effects of number of nails and interface gap on the overall load-carrying capacity of joints with multiple nails. The current practice for the design of nailed joints is that a joint fastened together with multiple nails in a row, regardless of the interface characteristics of that joint, carries lateral load equal

Style APA, Harvard, Vancouver, ISO itp.

Pei, Qiang, Cong Wu, Zhi Cheng, Yu Ding, and Hang Guo. "The Seismic Performance of New Self-Centering Beam-Column Joints of Conventional Island Main Buildings in Nuclear Power Plants." Materials 15, no. 5 (2022): 1704. http://dx.doi.org/10.3390/ma15051704.

Pełny tekst źródła

Streszczenie:

In order to improve the deformation energy consumption and self-centering ability of reinforced concrete (RC) frame beam-column joints for main buildings of conventional islands in nuclear power plants, a new type of self-centering joint equipped with super-elastic shape memory alloy (SMA) bars and a steel plate as kernel components in the core area of the joint is proposed in this study. Four 1/5-scale frame joints were designed and manufactured, including two contrast joints (a normal reinforced concrete joint and a concrete joint that replaces steel bars with SMA bars) and two new model joi

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Joint Capacity"

Sahboun, Salahaddin. "V-band joint torsional load capacity." Thesis, University of Huddersfield, 2015. http://eprints.hud.ac.uk/id/eprint/28321/.

Pełny tekst źródła

Streszczenie:

This research thesis presents an analysis of the torsional loads on V-band clamps. In some applications, the relative rotational movement of the flanges connected by V-band clamps can result in catastrophic system failure. The ability to understand the factors impacting on torsional load capacity is therefore essential. In this research project, a theoretical model of a V-band joint subjected to torsional loads was developed. This model is used to identify those parameters that will impact on the joint’s reliability. An experimental investigation was conducted to validate a theoretical model u

Style APA, Harvard, Vancouver, ISO itp.

Chatzinotas, Symeon. "Information-theoretic capacity limits in multi-cell joint processing systems." Thesis, University of Surrey, 2009. http://epubs.surrey.ac.uk/842899/.

Pełny tekst źródła

Streszczenie:

Multicell Joint Processing has emerged as a new paradigm of cooperative communications, which aims at pushing the capacity limits of cellular systems by eliminating inter-cell interference. Its operation is based on the concept of Base Station cooperation, which is enabled through wideband error-free low-latency links to a central signal processor. This processor is responsible for jointly encoding or decoding the signals, which are transmitted to or received from the User Terminals of the cellular system. The rationale behind this cooperation is that spatially distributed Base Stations are ab

Style APA, Harvard, Vancouver, ISO itp.

Grant, Stephen James. "Increased capacity for TDMA cellular systems through joint detection with diversity arrays." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape4/PQDD_0009/NQ61645.pdf.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Shiels, Ryan G. "The pharmacokinetics and anti-inflammatory capacity of Bilirubin Sulfonate: A novel biliverdin metabolite." Thesis, Griffith University, 2020. http://hdl.handle.net/10072/396150.

Pełny tekst źródła

Streszczenie:

In mammals, tetrapyrroles formed following the catabolism of haem (i.e. bilirubin and biliverdin, bile pigments) protect against free radical mediated damage that is induced during inflammation and therefore represent potential therapeutic targets. Recently, novel metabolites of biliverdin were discovered in blood, urine and bile following intraduodenal biliverdin administration(1) indicating a new pathway for biliverdin metabolism had been discovered and required bacteria for biliverdin transformation. These data are important because oral biliverdin administration protects from inflammatory

Style APA, Harvard, Vancouver, ISO itp.

Mardaneh, Elham. "Joint pricing and production planning of multiple products." Thesis, Curtin University, 2010. http://hdl.handle.net/20.500.11937/869.

Pełny tekst źródła

Streszczenie:

Many industries are beginning to use innovative pricing techniques to improve inventory control, capacity utilisation, and ultimately the profit of the firm. In manufacturing, the coordination of pricing and production decisions offers significant opportunities to improve supply chain performance by better matching supply and demand. This integration of pricing, production and distribution decisions in retail or manufacturing environments is still in its early stages in many companies. Importantly it has the potential to radically improve supply chain efficiencies in much the same way as reven

Style APA, Harvard, Vancouver, ISO itp.

Klijn, Elko. "Knowledge transfer between partners of international joint ventures : knowledge acquisition, knowledge accession, and eloquent capacity." Thesis, University of Leeds, 2006. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.428264.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Yang, Jie. "Structural behaviour of concrete-filled elliptical column to I-beam connections." Thesis, University of Bradford, 2017. http://hdl.handle.net/10454/16022.

Pełny tekst źródła

Streszczenie:

Concrete-filled tubular (CFT) columns have been widely adopted in building structures owing to their superior structural performance, such as enhanced load bearing capacity, compared to hollow tubes. Circular, square and rectangular hollow sections are most commonly used in the past few decades. Elliptical hollow section (EHS) available recently is regarded as a new cross-section for the CFT columns due to its attractive appearance, optional orientation either on major axis or minor axis and improved structural efficiency. The state of the research in terms of elliptical columns, tubular joint

Style APA, Harvard, Vancouver, ISO itp.

Katariya, Abhilasha Prakash. "Joint production and economic retention quantity decisions in capacitated production systems serving multiple market segments." [College Station, Tex. : Texas A&M University, 2008. http://hdl.handle.net/1969.1/ETD-TAMU-2985.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

HOELTGEBAUM, HENRIQUE HELFER. "FORECAST OF THE JOINT DENSITY OF WIND CAPACITY FACTOR THROUGH THE USE OF A MULTIVARIATE GAS MODEL." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2015. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=25286@1.

Pełny tekst źródła

Streszczenie:

PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO<br>COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR<br>PROGRAMA DE EXCELENCIA ACADEMICA<br>Neste trabalho usamos o arcabouço dos modelos GAS para gerar previsões conjuntas de fator de capacidade eólico, pertencentes a diferentes usinas localizadas em áreas geográficas distintas. Esses cenários são insumos para gerar uma distribuição de fluxo de caixa associada a um portfólio de contratos atrelados aos parques eólicos em questão. Inicialmente modelamos as densidades marginais via um modelo GAS, supondo densidade Beta. De maneira a c

Style APA, Harvard, Vancouver, ISO itp.

Fallgren, Mikael. "Optimization of Joint Cell, Channel and Power Allocation in Wireless Communication Networks." Doctoral thesis, KTH, Optimeringslära och systemteori, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-40274.

Pełny tekst źródła

Streszczenie:

In this thesis we formulate joint cell, channel and power allocation problems within wireless communication networks. The objectives are to maximize the user with mini- mum data throughput (Shannon capacity) or to maximize the total system throughput, referred to as the max-min and max-sum problem respectively. The complexity is stud- ied together with proposed optimization- and heuristic-based approaches. In the first paper an overall joint cell, channel and power allocation max-min prob- lem is formulated. We show that the decision problem is NP-hard and that the op- timization problem is no

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Książki na temat "Joint Capacity"

Koninklijk Instituut voor de Tropen and Joint United Nations Programme on HIV/AIDS, eds. Making sense of capacity development: Experiences with technical assistance and capacity development in the HIV response. KIT, 2010.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Caligari, John Graham. The army's capacity to defend Australia offshore: The need for a joint approach. Strategic and Defence Studies Centre, Australian National University, 2000.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Sagers, Matthew J. The Gaztransit joint venture's role in expanding Ukraine's gas export capacity to the Balkans. CERA, 2002.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Mansur, Aisha. Report on fundraising capacity building project: A joint collaboration between LEAD Pakistan & IDRC, February 2004 - February 2005. Edited by Hasan Zabreen, Leadership for Environment and Development, Pakistan., and International Development Research Centre (Canada). LEAD Pakistan, 2005.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Sciences, African Academy of, African-American Institute, and African Training for Leadership and Advanced Skills (Project), eds. Joint programme on ATLAS, African Training for Leadership and Advanced Skills: A capacity building and professional enhancement programme 1995. The African Academy of Sciences, 1995.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Joint Meeting on Social Dialogue in the Health Services (2002 Geneva, Switzerland). Social dialogue in the health services: Institutions, capacity and effectiveness : report for discussion at the Joint Meeting on Social Dialogue in the Health Services : institutions, capacity and effectiveness, Geneva 2002. International Labour Office, 2002.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Canada, Canada Industry, ed. Strengthening voluntary sector capacity through technology: Report of the Joint Table on Information Management/Information Technology of the Voluntary Sector Initiative. Industry Canada, 2002.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Canada, Canada Industry, ed. Strengthening voluntary sector capacity through technology: Report of the Joint Table on Information Management / Information Technology of the Voluntary Sector Initiative. Industry Canada, 2002.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Churches Health Association of Zambia., Pact (Organization :. Zambia), and Global Fund to Fight AIDS, Tuberculosis, and Malaria., eds. Human capacity development: A joint program with Churches Health Association of Zambia and PACT Zambia with support from the Global Fund : synthesis report. Churches Health Association of Zambia, 2006.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Commission, Virginia General Assembly Joint Legislative Audit &. Review. Report of the Joint Legislative Audit and Review Commission on Virginia's correctional system: Population forecasting and capacity to the Governor and the General Assembly of Virginia. Commonwealth of Virginia, 1985.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Części książek na temat "Joint Capacity"

Jungers, Raphaël. "Capacity of Codes." In The Joint Spectral Radius. Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-540-95980-9_7.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Denis, Hansi, Ngoc-Quang Luong, and Siegfried Mercelis. "Joint Tugboat and Dock Pilot Capacity Prediction." In Lecture Notes in Networks and Systems. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-68628-3_11.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Peng, Chengwei, and Wenlong Lv. "Experimental Study on Mechanical Properties of the Damaged Hoop Head Mortise-Tenon Joint." In Advances in Frontier Research on Engineering Structures. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-8657-4_35.

Pełny tekst źródła

Streszczenie:

AbstractDamage is a common condition in ancient timber structures, whose influence on the mechanical properties of structures cannot be ignored. To study the mechanical properties of damaged hoop head mortise-tenon joint, four specimens with shrinkage gauge, including one intact joint specimen and three artificial simulated damaged joint specimens, are designed, and fabricated in this paper by regarding the global damage degree and column axial force as the variation of parameters. The failure mode, hysteresis curve, skeleton curve, ductility, and energy dissipation capacity of the specimens a

Style APA, Harvard, Vancouver, ISO itp.

Wang, Zijian, Hongkun Li, Xin Zhang, et al. "Load Transfer Capacity Analysis of Prefabricated Steel Fiber Concrete Pavement Slab." In Novel Technology and Whole-Process Management in Prefabricated Building. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-5108-2_29.

Pełny tekst źródła

Streszczenie:

AbstractThe joint of prefabricated concrete pavement slab is an important structural part of the prefabricated pavement slab. The joint damage will reduce the pavement function and accelerate the plate damage. The joint treatment technology is also a problem that puzzles engineering researchers. How to ensure the mechanical properties, load transfer rate and life of the assembled road joint has become the main research direction of the assembled road. This paper takes the indoor test as the research method, analyzes the bending and strain of the indoor test groove and lap joint. It is found th

Style APA, Harvard, Vancouver, ISO itp.

Heidbreder, Eva G. "Horizontal Capacity Pooling: Direct, Decentralized, Joint Policy Execution." In The Palgrave Handbook of the European Administrative System. Palgrave Macmillan UK, 2015. http://dx.doi.org/10.1057/9781137339898_21.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Chuah, M. C., S. Nanda, and W. S. Wong. "Squeezing Out Capacity with Joint Power-Control and Channel Assignment." In Wireless and Mobile Communications. Springer US, 1994. http://dx.doi.org/10.1007/978-1-4615-2716-9_13.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Brian, Gianluca, Antonio Faonio, and Daniele Venturi. "Continuously Non-malleable Secret Sharing: Joint Tampering, Plain Model and Capacity." In Theory of Cryptography. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-90453-1_12.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Ji, Hai, Yonggang Lv, and Qingfei Huang. "Numerical Simulation Analysis of Mechanical Properties of Semi-rigid Immersed Tube Tunnel Joints." In Lecture Notes in Civil Engineering. Springer Nature Singapore, 2024. http://dx.doi.org/10.1007/978-981-97-4090-1_17.

Pełny tekst źródła

Streszczenie:

AbstractThe Hong Kong–Zhuhai–Macau Bridge immersed tube tunnel project is the only deep buried and large siltation immersed tube tunnel in the world. There is no similar case in the world. Its stress deformation characteristics are different from those of conventional shallow buried tunnels. According to the traditional design method of immersed tubes, there will be a series of problems. To address these issues, a semi rigid pipe joint scheme between rigid and flexible pipe joints has been proposed. By comparing the forces acting on the joints with traditional types of pipe joints, the mechani

Style APA, Harvard, Vancouver, ISO itp.

Śliwa-Wieczorek, Klaudia, Wit Derkowski, Eva Binder, et al. "Shear Stiffness and Capacity of PolyUrethane Flexible Joint in Timber-Concrete Composites." In Lecture Notes in Civil Engineering. Springer Nature Switzerland, 2023. http://dx.doi.org/10.1007/978-3-031-32519-9_46.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Qiu, Chengyu, Peng Feng, Yue Yang, Lei Zhu, and Yu Bai. "Joint Capacity of Bonded Sleeve Connections for Tubular Fibre Reinforced Polymer Members." In Composites for Building Assembly. Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-4278-5_12.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Joint Capacity"

Gir, Alam, Muhammad Fahim, and Abdul Ghani. "Behavior of RC Beam-Column Joints Using High-Strength Concrete and Engineered Cementitious Composite." In 14th International Civil Engineering Conference. Trans Tech Publications Ltd, 2025. https://doi.org/10.4028/p-wxh4qe.

Pełny tekst źródła

Streszczenie:

In seismically active areas, the structural integrity of structures is significantly reliant on the efficacy of beam-to-column connections. This study investigates the potential of high-strength concrete (HSC) and engineered cementitious composites (ECC) as alternatives to conventional transverse reinforcements to alleviate joint congestion and enhance the performance of beam-column joints. Four full-scale models were tested, including progressive and cyclic load evaluations. Two models had HSC, HBCJ I (HSC in joint only), and HBCJ II (HSC in joint plus extended to members), and the other had

Style APA, Harvard, Vancouver, ISO itp.

Brovkin, Andrey A., Yakov V. Kryukov, Dmitriy A. Pokamestov, Artem S. Shinkevich, Georgiy N. Shalin, and Dmitriy E. Ilinskiy. "Comparison of PD-NOMA Capacity with Conventional and Joint Gray-Mapping." In 2024 IEEE 25th International Conference of Young Professionals in Electron Devices and Materials (EDM). IEEE, 2024. http://dx.doi.org/10.1109/edm61683.2024.10614994.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

DEVULAPALLY, Deekshith Reddy. "Non-rotationally symmetric joints – Mechanisms and load bearing capacity." In Material Forming. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903131-183.

Pełny tekst źródła

Streszczenie:

Abstract. Traditionally, joints are cylindrical and rotationally symmetric. In the present study, non-rotationally symmetric joints are used for joining steel and Glass mat-reinforced thermoplastic sheets (GMT). In addition, the study also analyzes the impact of non-rotational symmetric joint rotation on the load-bearing capacity. Single lap joint specimens were fabricated using the In-Mold assembly technique for joining steel sheets with GMT. Tensile shear tests were performed on different orientations of the joint geometry, and it was observed that changing the joint orientation influences t

Style APA, Harvard, Vancouver, ISO itp.

Vieira, Anderson P., Luciano M. Christofoletti, and Plínio R. S. Vilela. "Analyzing Railway Capacity Using a Planning Tool." In 2018 Joint Rail Conference. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/jrc2018-6160.

Pełny tekst źródła

Streszczenie:

1Railway transportation is a mean of conveying ore, goods or passengers on wheeled vehicles running on rails. The operation is costly and the transported goods have low aggregated value, therefore profitability is enabled under long distances and large quantities. Railways all around the world face rising demand for transportation of goods and people. While upgrading the railroad infrastructure is guaranteed to increase capacity, it usually takes large capital expenditures and is time consuming. In this paper we show how a circulation planning tool can aid railroads fully utilize their infrast

Style APA, Harvard, Vancouver, ISO itp.

Li, L. K. "Capacity of recurrent networks." In 1991 IEEE International Joint Conference on Neural Networks. IEEE, 1991. http://dx.doi.org/10.1109/ijcnn.1991.170581.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Tang, Ling, Jinghui Qian, Lei Xu, and Yan Yu. "Joint pricing and capacity planning for IaaS cloud." In 2014 International Conference on Information Networking (ICOIN). IEEE, 2014. http://dx.doi.org/10.1109/icoin.2014.6799661.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Lai, Yung-Cheng Rex, and Mei-Cheng Shih. "Strategic Capacity Planning Process for Intercity Passenger Rail." In 2010 Joint Rail Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/jrc2010-36158.

Pełny tekst źródła

Streszczenie:

The demand for railway transportation is expected to be significantly increased worldwide; hence railway agencies are looking for better tools to allocate their capital investments on capacity planning in the best possible way. We presented a capacity planning process to help planners enumerate possible expansion options and determine the optimal network investment plan to meet the future demand. This process was applied to the conventional railway system in Taiwan to demonstrate its potential use. Using this capacity planning process will help railway agencies maximize their return from capac

Style APA, Harvard, Vancouver, ISO itp.

Khadem-Sameni, Melody, John Preston, and John Armstrong. "Railway Capacity Challenge: Measuring and Managing in Britain." In 2010 Joint Rail Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/jrc2010-36280.

Pełny tekst źródła

Streszczenie:

In the European Union, the total length of railway lines has decreased since 1970, mainly by abandoning very old routes such as those to coal mines. However, there has been huge growth in the transport of goods and passengers due to economic growth and globalization. Accommodating more passengers and goods on less infrastructure has resulted in the railway capacity challenge. The highest rate of growth in passenger kilometres in Europe belongs to Britain, where a rise of 42.2 percent has been achieved in the period 1995–2006 while the total length of railway lines has decreased from 19,330 rou

Style APA, Harvard, Vancouver, ISO itp.

Khadem-Sameni, Melody, Alex Landex, and John Preston. "Revising the UIC 406 Method: Revenue Generating Capacity." In 2010 Joint Rail Conference. ASMEDC, 2010. http://dx.doi.org/10.1115/jrc2010-36281.

Pełny tekst źródła

Streszczenie:

The UIC 406 method has been published by the International Union of Railways (UIC) in 2004 and quantifies capacity utilisation for a given infrastructure. It is generally suitable for capacity analysis in European railways that are focused mainly on passenger operations and run according to exact timetables. This method defines railway capacity as “the total number of possible paths in a defined time window, considering the actual path mix or known developments respectively”. To measure the railway capacity consumption, timetable graphs can be used where by the given infrastructure and the typ

Style APA, Harvard, Vancouver, ISO itp.

Duarte da Costa, Job, Renata Obiala, and Christoph Odenbreit. "A new method to assess the stiffness and rotation capacity of composite joints." In 12th international conference on ‘Advances in Steel-Concrete Composite Structures’ - ASCCS 2018. Universitat Politècnica València, 2018. http://dx.doi.org/10.4995/asccs2018.2018.7082.

Pełny tekst źródła

Streszczenie:

Composite beam-to-column joints in buildings are mostly modelled as pinned joints in order to facilitate the design of the structure. In reality, due to the required reinforcement in the concrete slab, a certain joint rigidity and bending resistance is always available. The real joint behaviour corresponds therefore more to that of a semi-continuous joint. This is not only beneficial for the serviceability limit state but can also be advantageous at ultimate limit state. However, due to the lack of analytical design rules in EN 1994 to verify the rotation capacity of semi-continuous joints, th

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Joint Capacity"

Mohr. L52032 Reliability of Girth Welds in Early Generation Pipelines - Joint Design and Flaw Combinations. Pipeline Research Council International, Inc. (PRCI), 2004. http://dx.doi.org/10.55274/r0011221.

Pełny tekst źródła

Streszczenie:

Demonstrating the reliability of existing pipelines under new loading conditions requires the use of standard methods that have known applicability to that type of pipe and data relevant to the pipe.� Both of these may be lacking for early generation pipelines, such as ones from the 1930s and 1940s, where the girth welds can have been welded with processes not commonly used today (oxyacetylene welding) or with joint designs that use internal backing.� Three types of joint designs were particularly used in this study:� butt joints with an internal backing ring, butt joints with a backing or chi

Style APA, Harvard, Vancouver, ISO itp.

Navarro, Adoracion. Challenges and Opportunities in Subnational Public-Private Partnerships in the Philippines. Philippine Institute for Development Studies, 2024. https://doi.org/10.62986/dp2024.43.

Pełny tekst źródła

Streszczenie:

If designed and implemented well, public-private partnership (PPP) projects can fill the gaps in the public provision of infrastructure facilities and social services at the subnational level. The more than three decades of implementing subnational PPPs in the Philippines have highlighted many challenges, partly due to capacity gaps at the subnational level and fragmentation in previous legal frameworks. This fragmentation was characterized by varying and inconsistent local legislative council ordinances on PPPs and joint ventures for local government units, as well as nationally designed join

Style APA, Harvard, Vancouver, ISO itp.

Roca, Jerónimo, Luiz Arruda Villela, and Alberto Daniel Barreix. Fiscal Policy and Equity: Estimation of the Progressivity and Redistributive Capacity of Taxes and Social Public Expenditure in the Andean Countries. Inter-American Development Bank, 2007. http://dx.doi.org/10.18235/0008525.

Pełny tekst źródła

Streszczenie:

This study summarizes the assessment of the impact of fiscal policies on equity in the Andean countries. It evaluates the outcome of the main taxes and social public expenditures on income distribution applying a homogeneous methodology. The full effect of taxes is slightly regressive due to a weak personal income tax collection. The accumulated public social expenditure has a much higher redistributive impact. It improves the Gini coefficient by 5 percentage points, however, close to half the effect of developed economies (Organization for Economic Cooperation and Development - OECD). Conside

Style APA, Harvard, Vancouver, ISO itp.

Looney, Trevor, Michael Mesigh, Jeffery Volz, and Royce Floyd. Repair of damaged continuity joints using ultra-high performance, fiber reinforced self-consolidating, and magnesium–aluminum–liquid–phosphate concretes. Engineer Research and Development Center (U.S.), 2025. https://doi.org/10.21079/11681/49607.

Pełny tekst źródła

Streszczenie:

Bridge elements known to develop damage over time are individual continuity joints connecting girders. Replacing damaged joints is an expensive and invasive process and a need exists to design a less invasive repair method. This study focused on evaluating an encapsulation repair method for continuity joints that would not require extensive demolition of the bridge deck to implement and could potentially be constructed without bridge closure. Approximately half scale connected bridge girder specimens were constructed and purposely damaged to create similar crack patterns to those seen in bridg

Style APA, Harvard, Vancouver, ISO itp.

Mashingia, Jane, S. Maboko, P. I. Mbwiri, et al. Joint Medicines Regulatory Procedure in the East African Community: Registration Timelines and Way Forward. Purdue University, 2021. http://dx.doi.org/10.5703/1288284317429.

Pełny tekst źródła

Streszczenie:

A review of the East African Community (EAC) joint regulatory review process was conducted, registration timelines analyzed and key milestones, challenges and opportunities documented for the period of July 2015 to January 2020. A total of 113 applications were submitted for joint scientific review. Among these, 109 applications were assessed, 57 were recommended for marketing authorisation, 52 applications had queries to applicants and four applications were under review. A total median approval time for all products ranged from 53 to 102 days. The maximum time taken by a regulator to review

Style APA, Harvard, Vancouver, ISO itp.

De Negri, João Alberto, Mauro Borges Lemos, and Fernanda De Negri. The Impact of University Enterprise Incentive Program on the Performance and Technological Efforts of Brazilian Industrial Firms. Inter-American Development Bank, 2006. http://dx.doi.org/10.18235/0011144.

Pełny tekst źródła

Streszczenie:

This study is an unprecedented effort in Brazil to evaluate the effectiveness of public incentive programs to develop technological capacity of firms. There are currently no empirical evaluations that have explored the impacts of this type of program on the performance of the Brazilian industrial firms in greater depth, particularly for those beneficiaries of these programs. This study therefore evaluates the FNDCT's impact, particularly its cooperative modality, which comprises a joint university-enterprise project for technological innovation. The results indicate that the FNDCT has positive

Style APA, Harvard, Vancouver, ISO itp.

Franco Calderón, Ángela María, Gynna Millan Franco, Andrés Sepúlveda, and Isabella Jaramillo Díaz. Policy Brief No. 5. Community initiatives for the desing and activation of public spaces in popular neighbourhoods. Universidad del Valle, 2023. http://dx.doi.org/10.25100/policy-briefs.pb.05-eng.

Pełny tekst źródła

Streszczenie:

Latin America and the Caribbean (LAC) is the most unequal region in the world (ECLAC, 2022). This condition, added to the limited capacity of states to respond to conditions such as poverty, insecurity, unemployment and lack of adequate housing, has led many people to build their own homes as a direct solution to have a roof. The popular neighbourhoods that emerge as a result of the social production of habitat are not only the physical-spatial expression of a joint project for households, but also social and cultural expressions of collective life that are expressed in the territory with the

Style APA, Harvard, Vancouver, ISO itp.

Slater, Anne-Michelle. Passport to the oceans of the future: delivering marine energy with science linked to policy. Marine Alliance for Science and Technology for Scotland (MASTS), 2021. http://dx.doi.org/10.15664/10023.23980.

Pełny tekst źródła

Streszczenie:

In February 2021, a group from MASTS, Environmental Interactions of Marine Renewables (EIMR) and Marine Scotland began exploring options for a joint event on marine energy science and policy development. The original concept was to bridge the gap between events that each group would normally arrange ‘in person’ and the virtual world in which we were all currently existing. Encouraged by the online support and experience available from MASTS, a steering group decided to arrange a workshop. In order to straddle our interests, the starting point was the capacity of the North Sea to deliver renewa

Style APA, Harvard, Vancouver, ISO itp.

Michalczewsky, Kathia, Anabel González, Amalia Stuhldreher, et al. Integration & Trade Journal: Volume 15 : No. 33 : July-December, 2011. Inter-American Development Bank, 2011. http://dx.doi.org/10.18235/0008366.

Pełny tekst źródła

Streszczenie:

The Integration & Trade Journal includes articles on the different aspects of integration in Latin America and the Caribbean, on hemispheric integration and, furthermore, on similar processes in other parts of the world. The Journal issued a call for the submission of papers that reviewed regional integration processes in Latin America and the Caribbean. This issue includes a collection of the many papers submitted. The titles include: Why it is Worth Rethinking Latin American Integration?; Financial Cooperation within the Context of South American Integration: Current Balance and Future C

Style APA, Harvard, Vancouver, ISO itp.

Dudoit, Alain. The urgency of the first link: Canada’s supply chain at breaking point, a national security issue. CIRANO, 2023. http://dx.doi.org/10.54932/cxwf7311.

Pełny tekst źródła

Streszczenie:

The creation of an intelligent supply chain is now an urgent national security priority that cannot be achieved without the joint mobilization of various stakeholders in Canada. It is not, however, an end in itself: the achievement of a single, competitive, sustainable, and consumer-focused domestic market should be the ultimate outcome of the national taskforce needed to collaboratively implement the recommendations of three complementary public policy reports published in 2022 on the state of the supply chain in Canada. The supply chain challenge is vast, and it will only become more complex

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!