Gotowe bibliografie tematyczne / Konstruksi / Rozprawy doktorskie
Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Konstruksi.

Rozprawy doktorskie na temat „Konstruksi”

Autor: Grafiati
Data publikacji: 2 czerwca 2025
Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych rozpraw doktorskich naukowych na temat „Konstruksi”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj rozprawy doktorskie z różnych dziedzin i twórz odpowiednie bibliografie.

1

Zöller, Isabelle. "Underachievement Konstrukt eines Defizits oder defizitäres Konstrukt?" Frankfurt, M. Berlin Bern Bruxelles New York, NY Oxford Wien Lang, 2009. http://d-nb.info/995943184/04.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Benešová, Lenka. "Železobetonová konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-371841.

Pełny tekst źródła
Streszczenie:
The diploma thesis is focused on the design and evaluation of the concrete monolithic ceiling slab in the shape of semicircular ring, ribs lining this plate and skylights. The result is static calculation and drawing documentation.
Style APA, Harvard, Vancouver, ISO itp.
3

Hochholdinger, Sabine. "Evaluation von Managementdiagnostik: Methoden, Konstrukte, Beispiele Methoden, Konstrukte, Beispiele /." [S.l. : s.n.], 2002. http://www.bsz-bw.de/cgi-bin/xvms.cgi?SWB10605033.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Wolf, Jiří. "Montovaná konstrukce autosalonu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372188.

Pełny tekst źródła
Streszczenie:
Aim of the final thesis is to create loadbearing prefabricated structure of building, which serve like office building and area for car-showroom, and creating static assessment of main supporting parts. For those parts will make drawing documentation of reinforcement and shapes. Computational 3D model for evaluation of internal forces is realized in Dlubal RFEM 5.07 software. For better check and comparison were create 2D spatial bar models of selected frames.
Style APA, Harvard, Vancouver, ISO itp.
5

Plačková, Markéta. "Ocelová konstrukce hangáru." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372262.

Pełny tekst źródła
Streszczenie:
This Master´s thesis describes the design and assessment of steel structure of a hangar located in Znojmo. The supporting structure of a hangar is 37,475 m span, 48 m lenght, clear hight at the highest point is 15,5 m. Main construction material is steel, grade S355J2. The supporting structure consist of a truss girders. The distance of each cross link sis 4 m. There is prepared statics calculation of the main load-bearing parts of the structure, including joints and details. The valid standards CSN EN were used in processing of this dissertation.
Style APA, Harvard, Vancouver, ISO itp.
6

Laža, Matěj. "Ocelová konstrukce tribuny." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-391900.

Pełny tekst źródła
Streszczenie:
The object of this thesis is to design and assess the roofing of concrete terraces on stadium Za Lužánkami in Brno. Rectangular plan of steel structure is 100x25 m. The main Girders are 5 m apart and are pin-supported. Girders are placed on concrete footings and supported by center columns. Roof cladding is connected with hot-rolled purlins. Two construction variants were designed and assessed. Variant A, where the main girders are made of welded beams (I shaped) and variant B, where the main girders are made of truss. Variant B was chosen as better option for this structure.
Style APA, Harvard, Vancouver, ISO itp.
7

Bystrianská, Kateřina. "Ocelová konstrukce autosalonu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2019. http://www.nusl.cz/ntk/nusl-392250.

Pełny tekst źródła
Streszczenie:
The diploma thesis deals with the design and assessment of the steel construction of the car showroom in Jihlava. The ground dimensions of the structure are 40,0 x 52,0 m and the height at the highest point is 13,14 m. The supporting structure consists of a truss girder consisting of a set of arches, outer columns and an inner column with a strut. This is a freebase system, the distance of the bindings is 4.0 m. In the framework of the work is elaborated the comparison of two variants, more suitable includes the static calculation of the main supporting parts, including the joints and details.
Style APA, Harvard, Vancouver, ISO itp.
8

Hort, Marek. "Konstrukce GPS přístroje." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218691.

Pełny tekst źródła
Streszczenie:
Aim of this Diploma thesis was to create a device capable of receiving navigational data from GPS. These data are subsequently stored in fixed memory and after connection with the PC are displayed it on the satellite map. The device was realized by using FPGA and GPS module LEA-5s. Description was created in the VHDL language, which was implemented into the circuit. The part of VHDL design was description of PICOBLAZE processor that controls whole system. For displaying and archiving data stored in device was created PC application GPS TRACER. It is able to display stored trace on the satellit
Style APA, Harvard, Vancouver, ISO itp.
9

Hlaváč, Libor. "Konstrukce GPS přístroje." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2010. http://www.nusl.cz/ntk/nusl-218692.

Pełny tekst źródła
Streszczenie:
The goal of this thesis is a complete design and realization of a device that is able to communicate with GPS module iTrax300 and display the coordinates received from the module. The thesis deals with the GPS, localization principles and the standard communication protocol for navigation systems - the NMEA 0183 protocol. Futhermore it is dealing with the particular steps in the realization of the engineered device (from the specification of requirements at the beginning to the testing of its functionality in the end). The GPS coordinates, the Coordinated Universal Time (UTC), the date, the al
Style APA, Harvard, Vancouver, ISO itp.
10

Náplava, Ondřej. "Nosná konstrukce autosalonu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225451.

Pełny tekst źródła
Streszczenie:
The theme of this work is design and check load-carrying steel structure of motor show in two variations. A given object is situated in Uherske Hradiste. The steel structure is created by two objects (main and adjoining), whose plans are partly overlaid. Main object has circular ground plan and adjoining object has rectangular ground plan. Building is two-storey. For analysis of internal forces, was constructed virtual spatial model, which was used for an optimization of partial bars for both limit states. The cladding will be made by system of roof panels Brollo and Rockwell. The wall facing
Style APA, Harvard, Vancouver, ISO itp.
11

Janda, Miloslav. "Zesilování stavebních konstrukcí." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225470.

Pełny tekst źródła
Streszczenie:
The subject of the diplom thesis is strengthening of building structures. The thesis is focused on strengthening of reinforced concrete compression of rod structures with concrete cover. The thesis consists of three parts. The first one is theoretical treatise on strengthening not only concrete compression of rod structures. The second part describes creating computer program of calculating concrete rod element rectangular overview which is made stronger with concrete cover using method of limit transformation. The third part consists of the static calculation strengthening of the concrete col
Style APA, Harvard, Vancouver, ISO itp.
12

Bartel, Jan. "Ocelová konstrukce hangáru." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225500.

Pełny tekst źródła
Streszczenie:
Object of this master´s thesis is the design of a hangar. Ground plan dimensions are 30x60m. Vertical cleareance is 11m, overall height is 15.3m. The structure is designed for the lokality of Ostrava. The structure is held by 60m long pipe tube truss of triangular shape. The main girdle is a tube 356x20mm. The truss girder is embedded on both sides on columns composed from HEB 300. There are trusses attached to this main girder each 6m
Style APA, Harvard, Vancouver, ISO itp.
13

Patková, Aneta. "Dřevěná konstrukce planetária." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225552.

Pełny tekst źródła
Streszczenie:
The subject matter of this theses is a static design and appraisal of a structure of the planetarium roof. It is a cupola over the circular plan and consists of two radial arched ribs. This theses contains two varieties of its structure.
Style APA, Harvard, Vancouver, ISO itp.
14

Pelechová, Denisa. "Nosná konstrukce autosalonu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2012. http://www.nusl.cz/ntk/nusl-225689.

Pełny tekst źródła
Streszczenie:
The master’s thesis treat of design and appreciation load-bearing steel structure of Motor Show. The object is situated on the lokality Brno. Structure is composed of rolling sections and tubes. Overall height of the structure is 17,395 meters and overall lenght is 32,60 meters. Cross link iscomposed of arched girders panel that are supported on fixed pillars. Theoutside links are composed of panel columns. Load is composed of self weight, additonal imposed load, payload and climate load caused by wind and snow that is reached for given locality.Static rewiew comes out from previous load and i
Style APA, Harvard, Vancouver, ISO itp.
15

Kubíček, Michal. "Nosná konstrukce jízdárny." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226064.

Pełny tekst źródła
Streszczenie:
Master's thesis describes the design and check of the construction of the riding hall. Here are compared two versions the steel structure riding hall. For select version is here technical report, design calculation, statement of material and design documentation. Next is prepared specialization in the field of building construction.
Style APA, Harvard, Vancouver, ISO itp.
16

Charvát, Lukáš. "Oceňování ocelových konstrukcí." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226121.

Pełny tekst źródła
Streszczenie:
This diploma thesis mainly deals with valuation of steel structures from the perspective of an investor. Today there are several types of steel constructions, which assemble is partly done in workshop, so called “bridge-workshop”, and the rest of the assembling is done directly at the building site. That is the main difference from the construction industry. This fact makes financial valuation of whole thesis very difficult, because construction companies often do not state detailed breakdown of their activities. The main goal of this thesis is to suggest procedure how to value steel construct
Style APA, Harvard, Vancouver, ISO itp.
17

Navrátil, Petr. "Studie konstrukce trativodu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226639.

Pełny tekst źródła
Streszczenie:
Mixing of backfill of the pipe drain construction with sub-ballast layer material through using enclosed drainage systems (mostly by pipe drains) has to be prevented. In order to do so, regulation SŽDC S4 Železniční spodek provides a filtration criterion which needs to be fulfilled or a geotextile with filtration function has to be used. This master thesis verifies if filtration criteria are fulfilled in between different backfilling of the pipe drains and sub-ballast layers in compliance with TNŽ 73 6949. Furthermore a verification of filtration function of different geotextiles including pro
Style APA, Harvard, Vancouver, ISO itp.
18

Slowik, Ondřej. "Pravděpodobnostní optimalizace konstrukcí." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226801.

Pełny tekst źródła
Streszczenie:
This thesis presents the reader the importance of optimization and probabilistic assessment of structures for civil engineering problems. Chapter 2 further investigates the combination between previously proposed optimization techniques and probabilistic assessment in the form of optimization constraints. Academic software has been developed for the purposes of demonstrating the effectiveness of the suggested methods and their statistical testing. 3th chapter summarizes the results of testing previously described optimization method (called Aimed Multilevel Sampling), including a comparison wi
Style APA, Harvard, Vancouver, ISO itp.
19

Růžičková, Markéta. "Ocelová konstrukce hangáru." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226908.

Pełny tekst źródła
Streszczenie:
The purpose of this dissertation is to take into consideration the design and the steel structure assessment of the hangar for small propeller aircraft type Cessna. The platform dimensions are 40,0 by 60,0 metres. Headroom is around 10,0 metres. The object’s location is in Brno. The main structural material is steel S355J2. There are two initial geometric alternatives, in other words structural modifications of desired solution. These are spatial truss arc tie beam and garland tie beam. The two alternatives were tentatively designed according to their dimensions and the main supporting element
Style APA, Harvard, Vancouver, ISO itp.
20

Klajba, Daniel. "Nosná železobetonová konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227209.

Pełny tekst źródła
Streszczenie:
The aim of diploma thesis is to design monolithic reinforced concrete underground structure, which is partly under existing building and partly will form the basis of a new outbuilding. Structure is designed as white tub, whitout any additional isolations against water a ground humidity. All structure elements (slabs, walls, beams) was designed according to standard ČSN EN 1992-1-1 for ultimate and serviceability limit state. Structural analysis was performed using Scia Engineer 2013 – Student version. The results were validated by simplyfied manual method.
Style APA, Harvard, Vancouver, ISO itp.
21

Hons, Filip. "Železobetonová skeletová konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227233.

Pełny tekst źródła
Streszczenie:
Master´s thesis focuses on the design of monolithic reinforced concrete structures storey hose which consist of 2 underground and 6 floors. This project deals whit two different boards, board over ground floor and over second floor, as well as three pillars supporting board, separate staircase placed in a reinforced core, base plate. All calculations are done according to applicable standards, mainly according to ČSN EN 1992-1-1.
Style APA, Harvard, Vancouver, ISO itp.
22

Sedlářová, Lucie. "Konstrukce předpjatého pásu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227328.

Pełny tekst źródła
Streszczenie:
The diploma thesis deals with a project of a pedestrian bridge across the valley. At first, there was a comparison of three options of a bridge, then the option of a prestressed concrete band was selected. The main aim of the diploma thesis is the design of the construction, the creation of a model in the programme Ansys 12.1 and the subsequent assessment in accordance with the current regulations.
Style APA, Harvard, Vancouver, ISO itp.
23

Eliášová, Kristýna. "Železobetonová nosná konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227461.

Pełny tekst źródła
Streszczenie:
My diploma thesis presents structural design of an apartment block in Praha Smíchov. It is a reinforced concrete column structure with six floors. Plane dimensions of the building are 19x36 m. The project includes design of main structural system elements - columns, ceiling plate, foundation and staircase structure.
Style APA, Harvard, Vancouver, ISO itp.
24

Pospíšilová, Lenka. "Konstrukce zastřešení kluziště." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227469.

Pełny tekst źródła
Streszczenie:
This document describes the design of the roof structure for the dimensions of the rink. It was designed and evaluated three roofing solutions – steel truss structure, concrete arch with external prestress and prestress truss roof girder with concrete roof panel. One option was selected – prestress truss girder. This variant has been further developed. In the beginning was drafted several proposals geometry respecting the demands on the type of construction. Within the static calculation was created a mathematical model of the structure of the program Scia Engineer. Using this model were obtai
Style APA, Harvard, Vancouver, ISO itp.
25

Hellebrand, David. "Ocelová konstrukce tribuny." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227788.

Pełny tekst źródła
Streszczenie:
This master’s thesis deals with a project of steel structure of roofed stand of a sports stadium situated nearby the city of Opava. Dimensions of roofed stand are 54 m x 10,5 m and height is 15 m. Structure is devidet into 9 parts, which are 6 m long. Design of elements and inner forces are solved with program SCIA Engineer. Computational model is designed as a three-dimensional bar structure. Two variants was solved in general and more convenient with a truss girder roof is work up in details.
Style APA, Harvard, Vancouver, ISO itp.
26

Peslar, Jiří. "Konstrukce peristaltického čerpadla." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228772.

Pełny tekst źródła
Streszczenie:
The subject of this thesis is a design of the volumetric infusion pumping unit specifically used for a human medicine purposes. The pumping unit is constructed by the linear peristaltic pump. The document focuses on mechanical design and disposition of particular components of unit and placement of electronic sensors and contacts. The thesis is elaborated as a part of infusion pump development project for a limited company.
Style APA, Harvard, Vancouver, ISO itp.
27

Gayer, Tomáš. "Konstrukce rámu lehokola." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2009. http://www.nusl.cz/ntk/nusl-228873.

Pełny tekst źródła
Streszczenie:
The aim of this diploma thesis is evolution of the new model of tricycle. This thesis describes process of engineering from design of several parts and whole frame in CAD system Autodesk Inventor, to creating complete drawing documentation. Next part of this thesis is focused on basic static-structural analysis using finite element method in software ANSYS Workbench and determining boundary conditions for this analysis. The final part is about visualization of the new tricycle.
Style APA, Harvard, Vancouver, ISO itp.
28

Nováček, Vladislav. "Konstrukce MR spojky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229390.

Pełny tekst źródła
Streszczenie:
This thesis deals with the design of the magnetorheological (MR) clutch. The extensive literature research with particular conclusions to each design variant of MR clutches or brakes has been done in the first part of the thesis. The second part of the thesis describes the design of the actual MR clutch based on the results of the analytical calculation of the magnetic circuit. Finally, the experiments verifying the function of the key segments of the clutch, and the whole clutch are summarized in the third part of the thesis.
Style APA, Harvard, Vancouver, ISO itp.
29

Mikulová, Michaela. "Konstrukce portálové frézky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2011. http://www.nusl.cz/ntk/nusl-229670.

Pełny tekst źródła
Streszczenie:
This master´s thesis deals with gantry – type milling machines. At first gantry – type milling machines are divided according to their structure. Then basic parts of an upper gantry – type milling machine are described. This machine is designed in a calculation part of this thesis. A calculation of a cutting force, a calculation of a needed moment of a drive of a spindle and a feed screw for axis x, y, z, a design of a belt drive between the spindle and the drive are done in the calculation part. Then the model of this upper gantry – type milling machines is made. Drawings are created for some
Style APA, Harvard, Vancouver, ISO itp.
30

Gašperec, Michal. "Konstrukce HHO generátoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230170.

Pełny tekst źródła
Streszczenie:
The subject of this Master Thesis is construction of hydrogen generator for automotive industry. The objective is to design system which is able to produce required amount of gas. The master thesis includes basic analysis of situation, mathematical equations of electrolytic process and procedure of mechanical design according required power of generator. The next part is design of power control system of hydrogen generator based on informations from automobile. The last part describes power supply of whole system with electric energy. The output of the Master Thesis is the whole design of hydr
Style APA, Harvard, Vancouver, ISO itp.
31

Štancl, Jiří. "Konstrukce svařovacího přípravku." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231099.

Pełny tekst źródła
Streszczenie:
The main focus of the thesis is the proposal for the construction of welding jig for the extension of the bus. Welding of individual parts of the assembly is on manual workplace. All parts are made of fabricated structural steel ČSN 41 1373 with galvannealed coating. As an appropriate technology for welding of extension with the optimal parameters method MAG was chosen.
Style APA, Harvard, Vancouver, ISO itp.
32

Krejčí, Martin. "Konstrukce Coriolisova průtokoměru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231300.

Pełny tekst źródła
Streszczenie:
This thesis deals with the structural design of mass flowmeter based on the principle of the Coriolis force. The introduction explains how the Coriolis flowmeter operates, what types of flowmeters are currently being produced and what are the important parameters. There are appointed some of the principles that must be followed to the meter working correctly. It contains a proposal design of flowmeter for pipes DN80 and. Includes drawings for this design.
Style APA, Harvard, Vancouver, ISO itp.
33

Soják, Vojtěch. "Konstrukce dvouosého manipulátoru." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231978.

Pełny tekst źródła
Streszczenie:
This master thesis deals with the design of a two-axis manipulator according to entered parameters. In the first chapter provides description of kinematics structures of industrial robots and manipulators and their workspaces. Next parts focus on search in the used components, producers of manipulators and of current design manipulators at JCEE s.r.o. Lanškroun. The practical part deals with the design and construction of custom manipulator and its price calculation.
Style APA, Harvard, Vancouver, ISO itp.
34

Žák, Petr. "Konstrukce CNC frézky." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2015. http://www.nusl.cz/ntk/nusl-231996.

Pełny tekst źródła
Streszczenie:
The diploma thesis includes design of vertical CNC milling machine. It also includes research in the field of CNC milling machines on the world market, which is carried out to select the appropriate machine parameters and the structural configuration of the machine. Another part of the thesis deals with the selection of suitable components, design calculations, manufacturing drawings and the 3D model showing the final design solution of proposed machine.
Style APA, Harvard, Vancouver, ISO itp.
35

Houšť, Vladimír. "Tenkostěnné přesypané konstrukce." Doctoral thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-234547.

Pełny tekst źródła
Streszczenie:
The thesis is devoted to analysing of flexible buried arch structures. Modelling of the flexible concrete arch is carried out via a nonlinear finite element model that accounts for soil constitutive relations, soil-structure interactions, sequential construction stages and soil compaction. Advanced FE-model was verified by measurement obtained by full-scale field testing of two buried arches. Mathematical optimization methods of genetic algorithms and Levenberg-Marquardt method are applied to already calibrated complex computational models in order to reduce bending and associated flexural str
Style APA, Harvard, Vancouver, ISO itp.
36

Kozumplík, Lukáš. "Železobetonová monolitická konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240145.

Pełny tekst źródła
Streszczenie:
The diploma thesis is focused on a structural analysis of a multi-storey office building. The Loadbearing structure is made of cast-in-place reinforced concrete. In the thesis there is analysed a selected floor slab, a column, a foundation pad, a part of loadbearing wall and a precast staircase. Computation of internal forces is carried out by computational software SCIA Engineer. The Results from the software are verificated via simplified manual method. Assessment of a structure is done according to valid standards and regulations.
Style APA, Harvard, Vancouver, ISO itp.
37

Veselý, Radek. "Ocelová konstrukce lávky." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240224.

Pełny tekst źródła
Streszczenie:
The topic of Master´s thesis is the design of steel foodbridge over the Morava river in Olomouc. Construction was carried out in two variants, one of which was chosen as the best option arched foodbridge is suspended orthotropic deck. Span bridge is 40m. Calculation of construction was carried out Scia Engineer 2015
Style APA, Harvard, Vancouver, ISO itp.
38

Polák, Marek. "Vícepodlažní montovaná konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240312.

Pełny tekst źródła
Streszczenie:
The final thesis is focused on reworking hospital pavilion from cast-in-place structure to precast concrete frame. Calculation of internal forces is made by software system SCIA Engineer. Main load-bearing elements are inner beam, outside beam and all columns in axis 2-C. This thesis contains assembly report, structural design, calculations and drawings of the designed parts, joint details, assembly material drawing and hand calculation.
Style APA, Harvard, Vancouver, ISO itp.
39

Nováková, Ľubica. "Analýza ocelové konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2016. http://www.nusl.cz/ntk/nusl-240314.

Pełny tekst źródła
Streszczenie:
This diploma thesis is engaged by analyses of steel structure. Structure was modelled in two variants, in software ANSYS Mechanical. Both models were at first counted by linear analyses, then they were counted by non-linear analyses. At the end models were counted by modal analyses. Aim of the study was evaluated and decide, which one of variant is structurally and economically most competently. Selected model was assessed on ultimate and serviceability limit state.
Style APA, Harvard, Vancouver, ISO itp.
40

Klimeš, Pavel. "Ocelová konstrukce heliportu." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265365.

Pełny tekst źródła
Streszczenie:
The diploma thesis concerns with the design and static analysis of the heliport steel construction, which has the height of 20 m. The heliport is situated in Prague, Na Františku as a part of the hospital. The technical report and drawings are included in the thesis as well. The thesis consists of the determination of the heliport total load (including permanent, live and climate loads) and, its implementation in the SCIA Engineer 2015.3 computer software. The stress analysis of selected rods and, joints was consequently carried out by means of the manual calculation.
Style APA, Harvard, Vancouver, ISO itp.
41

Bartosch, Václav. "Montovaná konstrukce haly." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265482.

Pełny tekst źródła
Streszczenie:
Master´s thesis describes the design and static calculating of selected elements of prefabricated reinforced concrete hall with bulit-in office, elaboration of basic drawings of the project documentation, shape and reinforcemenet drawings of these selected structural prefabricated elements. The work also includes technical report, details of selected element´s contacts, drawing of plates and study of the behavior of reinforced buildings. Calculation was performed by using a computer program AxisVm, Microsoft Excel a IDEA StatiCa
Style APA, Harvard, Vancouver, ISO itp.
42

Holbová, Monika. "Diagnostika železobetonové konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265583.

Pełny tekst źródła
Streszczenie:
This diploma thesis deals with the building survey and diagnosis of the station building of a railway station in Vítkovice. It describes process of survey and evaluation of existing reinforced concrete structures and used diagnostic methods. The survey of the object is described in the practical part of the thesis, which involves location of testing spots, taking the samples for testing from the structure, laboratory testing and evaluation of the results – determination of compressive strength of concrete with classification of concrete and elastic modulus. The last part includes static calcul
Style APA, Harvard, Vancouver, ISO itp.
43

Necid, Miloš. "Vícepolová mostní konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-265718.

Pełny tekst źródła
Streszczenie:
I deal with the road bridge near Velké Meziříčí in the thesis. The highway bridge overcomes valley 360 m long and 36 m high. For each course there is a separate super-structure. Each of the support structures converts three stripes of road transport. I do calculation of internal forces both manually and in Scia Engineer. In the thesis is drawings, showing the gradual construction, diagram of prestressing and reinforcement.
Style APA, Harvard, Vancouver, ISO itp.
44

Jindrová, Barbora. "Možnosti stanovení mrazuvzdornosti betonu v konstrukci." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409955.

Pełny tekst źródła
Streszczenie:
The diploma thesis deals with different methods of determining levels of degradation of concrete due to freezing, also considering the options of freeze thaw resistance determination in structure. At first the properties of concrete and possible mechanisms of concrete degradation are described – mainly the effects of freezing water in the inner structure and of the combination of freezing water and de-icing chemicals on the surface. Principle and properties of air-entrained concrete are also mentioned. An overview of the approaches that current standards use to determine the freeze-thaw resist
Style APA, Harvard, Vancouver, ISO itp.
45

Tačner, Jan. "Analýza působení větru na stavební konstrukci." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227314.

Pełny tekst źródła
Streszczenie:
Diploma thesis deals with static and dynamic analyses of a slender bridge structure behavior. The footbridge structure model was created in ANSYS 14.5 programing system. Static and a modal analyses were made afterwards and according to these analyses dynamic wind load and dynamic pedestrian load were applied. Wind load was applied as option of deck without a handrail and as option of deck with fully airtight handrail. Pedestrians were perceived as group of pedestrians and as a sparse crowd. Both applied loads were solved by harmonic analyses. Results of these analyses are resonance curves and
Style APA, Harvard, Vancouver, ISO itp.
46

Egelstig, Martin. "Konstruktiv utformning av vikplog." Thesis, Umeå universitet, Institutionen för tillämpad fysik och elektronik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:umu:diva-104319.

Pełny tekst źródła
Streszczenie:
This project is about investigation and improvement of a V-plow for the company Swekip. A V- plow is used for snow removal but this product has been found to have deficiencies in its construction, breaking down and not living up to the desired objectives. This is because the product is ordered from a company in China where they have some problems with understanding the purpose of the plow. Initially the existing plow is investigated, all the shortcomings set out and examined, what is wrong and what needs improvement? When the solutions were done they were evaluated and examined that they actua
Style APA, Harvard, Vancouver, ISO itp.
47

Tylčer, Jan. "Návrh předpjaté mostní konstrukce." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226959.

Pełny tekst źródła
Streszczenie:
This thesis describes the design of a road bridge in Trutnov through local communication. It is designed prestressed dvoutrámová construction of two fields with twin inclined struts. It developed a detailed static analysis and the bridge is considered to I. and II. limit state according to European standards - Eurocode. It is prepared detailed drawings.
Style APA, Harvard, Vancouver, ISO itp.
48

Plíšková, Iveta. "Nosná konstrukce obchodního centra." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227191.

Pełny tekst źródła
Streszczenie:
The aim the diploma thesis is the design and the assessment of the main structure of the shopping centre in the Hradec Králové. The shape of the construction is the cylindrical hall with dimensions 120 x 32 m. The structure is formed by lattice trusses, solid purlins, columns and composite construction. The model of the structure and some calculations were provided by the program Dlubal RFEM.
Style APA, Harvard, Vancouver, ISO itp.
49

Šimčík, Jaroslav. "Konstrukce hydraulické štípačky dřeva." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229211.

Pełny tekst źródła
Streszczenie:
Bc. Jaroslav Simcik Construction of hydraulic wood-splitting machine DP, Institute of production machines, systems and robotics, 2010, p. 60, fig. 30, appendices 7, This master ´s thesis is concerned with the wood-processing technology with a focus on the construction of hydraulic wood splitter machine with a force 120 kN.
Style APA, Harvard, Vancouver, ISO itp.
50

Křivohlávek, Pavel. "Konstrukce zakružovačky ocelových profilů." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-229213.

Pełny tekst źródła
Streszczenie:
The aim of this thesis is to design steel beams bending machine. In the introduction, is characterized by a bending machine and carried out research costs, including factory-produced manufacturers. Followed by a proposal of alternative solutions, evaluating them and selecting the most appropriate conception. The next section is described in detail the proposed model, including stress analysis of loaded parts. The thesis also examined the safety of a forming machine, prepared an analysis of possible defects and their consequences in the design. Finally, it created the design documentation on th
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany bibliografiami na temat „Konstruksi” dla innych typów źródeł:
Artykuły w czasopismach Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii