Zaloguj się

Gotowe bibliografie tematyczne / Lampu UV

Spis treści

Artykuły w czasopismach
Rozprawy doktorskie
Książki
Części książek
Streszczenia konferencji
Raporty organizacyjne

Gotowa bibliografia na temat „Lampu UV”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Lampu UV”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Lampu UV"

1

Mahardiananta, I. Made Agus, Suhartono Suhartono, Cokorda Istri Dharmayanti, and Jurnal Abdi Insani. "UPAYA PERAWATAN PERALATAN KESEHATAN DALAM RANGKA MENJAGA DAN MENINGKATKAN MUTU PELAYANAN KESEHATAN DI PUSKESMAS TAMPAKSIRING II." Jurnal Abdi Insani 9, no. 1 (2022): 1–8. http://dx.doi.org/10.29303/abdiinsani.v9i1.466.

Pełny tekst źródła

Streszczenie:

Mutu pelayanan kesehatan harus selalu ditingkatkan demi terwujudnya derajat kesehatan masyarakat yang baik. Salah satu hal yang dapat dilakukan adalah dengan menjaga kualitas sarana dan peralatan kesehatan yang tersedia. Indikator alat kesehatan yang berkualitas diantaranya terjamin ketelitian, ketepatan dan keamanan dalam pemakaiannya. Adapun beberapa alat kesehatan yang sering digunakan seperti EKG, regulator flumeter, tensimeter digital, sterilisator kering, examination lamp dan lampu UV, merupakan suatu elemen penting yang menjaga keberlangsungan pelayanan kesehatan masyarakat. Kegiatan pe

Style APA, Harvard, Vancouver, ISO itp.

2

Riyani, Kapti, and Tien Setyaningtyas. "FOTODEGRADASI SIANIDA DALAM LIMBAH CAIR TAPIOKA." Molekul 8, no. 1 (2013): 49. http://dx.doi.org/10.20884/1.jm.2013.8.1.125.

Pełny tekst źródła

Streszczenie:

Sianida banyak terdapat pada limbah cair tapioka. Sianida dapat didegradasi menggunakan fotokatalis TiO2 dengan aktivasi sinar UV, sinar UV dapat berasal dari lampu UV dan sinar matahari.Tujuan dari penelitian ini adalah mendegradasi sianida menggunakan fotokatalis TiO2 menggunakan sumber sinar lampu UV dan sinar matahari.Fotokatalis TiO2 yang digunakan dalam penelitian ini dibuat lapis tipis pada plat kaca dengan ukuran 7 x 10 cm2. Variasi sumber sinar yaitu lampu UV dan sinar matahari dipelajari pada pH 9.Hasil penelitian menunjukkan bahwa penurunan kadar sianida menggunakan sumber sinar lam

Style APA, Harvard, Vancouver, ISO itp.

3

Heltina, Desi, Raihan Daffansyah Sinaga, Yayan Setiawan, M. Iwan Fermi, and Amun Amri. "Photodegradation of Liquid Waste Using ZnO/Graphene-Like Composites." Elkawnie 10, no. 1 (2024): 125. http://dx.doi.org/10.22373/ekw.v10i1.21000.

Pełny tekst źródła

Streszczenie:

Abstract: The development of industries such as textiles, dyes, plastics, medicines, cosmetics, and others is increasing along with a rise in production, leading to a high amount of liquid waste generated. Non-biodegradable, toxic, and carcinogenic liquid waste can cause environmental pollution to surrounding water. To address this challenge, biomass waste such as palm kernel shells can be used to treat liquid waste by compositing it with photocatalyst materials. Therefore, this research aimed to obtain ZnO/graphene-like composites to degrade liquid waste. ZnO/Graphene-like composites were syn

Style APA, Harvard, Vancouver, ISO itp.

4

Wawan Saputra, I. Gede, I. KT Adi Atmika, and I. D. G. Ary Subagia. "PENGARUH RADIASI ULTRAVIOLET (UV) PADA PIPA KOMPOSIT JUTE-EPOKSI TERHADAP BEBAN KOMPRESI." Jurnal Teknologi Bahan dan Barang Teknik 12, no. 1 (2023): 7. http://dx.doi.org/10.37209/jtbbt.v12i1.233.

Pełny tekst źródła

Streszczenie:

Pengaruh radiasi UV pada pipa berbahan komposit serat jute epoksi matriks telah diteliti. Adapun tujuan penelitian ini untuk mengamati pengaruh radiasi UV terhadap sifat mekanik (pembebanan kompresi) pipa berbahan komposit. Percobaan skala laboratorium telah dilakukan dengan membuat benda uji pipa yang terbuat dari komposit. Komposit terbuat dari 3 lapis serat jute dan matriks epoksi. Adapun pembuatan benda uji dilakukan melalui proses cetakan vakum injeksi (VIM). UV (ultraviolet) dikondisikan dengan memadukan lampu Halogen 300W, lampu UVC T5 8W, lampu bohlam reflektor 40W, dan lampu UV GNB BL

Style APA, Harvard, Vancouver, ISO itp.

5

Kurniawan, Hary, Sukmawaty Sukmawaty, Murad Murad, Ansar Ansar, Rahmat Sabani, and Kurniawan Yuniarto. "Efek Daya Lampu Sinar UV C dan Lama Penyinaran Terhadap Perubahan pH dan Total Padatan Terlarut Nira Aren Selama Penyimpanan." Jurnal BETA (Biosistem dan Teknik Pertanian) 8, no. 2 (2020): 352. http://dx.doi.org/10.24843/jbeta.2020.v08.i02.p20.

Pełny tekst źródła

Streszczenie:

Penelitian ini bertujuan untuk mengetahui efek daya lampu sinar ultraviolet (UV C) dan lama penyinaran terhadap perubahan pH dan total padatan terlarut pada nira aren selama penyimpanan. Penelitian dilakukan menggunakan Rancangan Acak Lengkap dengan dua faktor yaitu perlakuan daya lampu UV C dan lama penyinaran. Parameter yang diukur yaitu pH dan brix dan pengukuran diulang sebanyak tiga kali. Hasil penelitian menunjukkan bahwa nira aren yang diberi perlakuan sinar UV C memiliki laju perubahan pH yang lebih rendah dibandingkan kontrol. Semakin tinggi daya lampu UV C yang digunakan mampu memper

Style APA, Harvard, Vancouver, ISO itp.

6

Harmawan Febrianto, Massus Subekti, and Nur Hanifah Yuninda. "PENGEMBANGAN ALAT DESINFEKSI AIR MINUM DENGAN UVGI (ULTRAVIOLET GERMECIDAL IRRADIATION) BERBASIS ARDUINO." Journal of Electrical Vocational Education and Technology 2, no. 1 (2020): 1–5. http://dx.doi.org/10.21009/jevet.0021.01.

Pełny tekst źródła

Streszczenie:

The purpose of this study is to make a drinking water desinfector device by irradiating ultraviolet light (UV) based on Arduino. The device can provide information specific to large-intensity UV lamps in optimal perfomance to desinfection drinking water, as well as a signal to the operator if, the intensity of the UV lamps has decreased resulting in water flow will be closed automatically controlled by on Arduino. This study uses a method of Research and Development (Research and Development), which includes planning, requirements analysis, design, and implementation of the system. Syste

Style APA, Harvard, Vancouver, ISO itp.

7

Ningsih, Dewi Untari Ratna, Mimin Karmini, and Nurul Hidayah. "PERBEDAAN DAYA LAMPU ULTRAVIOLET-C TERHADAP PENURUNAN JUMLAH BAKTERI COLIFORM PADA AIR BERSIH DI INDUSTRI LOGAM." Jurnal Riset Kesehatan Poltekkes Depkes Bandung 13, no. 2 (2021): 422–26. http://dx.doi.org/10.34011/juriskesbdg.v13i2.1931.

Pełny tekst źródła

Streszczenie:

Air bersih di Industri Logam tidak memenuhi syarat karena terkontaminasi oleh bakteri Coliform, sehingga diperlukan proses desinfeksi menggunakan sinar UV-C. Tujuan penelitian untuk mengetahui perbedaan daya lampu ultraviolet-c terhadap penurunan jumlah bakteri Coliform pada air bersih. Daya lampu UV-C yang digunakan adalah 15 watt, 30 watt, dan 36 watt, panjang gelombang 254 nm dan waktu kontak 45 detik. Jenis penelitian ini yaitu true experiment dengan 6 pengulangan dan desain penelitian yaitu pre-postest without control. Teknik pengambilan sampel yaitu grab sampling. Populasinya adalah air

Style APA, Harvard, Vancouver, ISO itp.

8

Islammiyati, Angie, Azrul Azwar, and Asifa Asri. "Studi Pengaruh Penyinaran Lampu Ultraviolet pada Kinerja Fotodegradasi Metilen Biru Berfotokatalis TiO2." PRISMA FISIKA 10, no. 3 (2023): 430. http://dx.doi.org/10.26418/pf.v10i3.60647.

Pełny tekst źródła

Streszczenie:

Telah dilakukan penelitian mengenai pengaruh penyinaran lampu ultraviolet pada kinerja fotodegradasi metilen biru menggunakan fotokatalis TiO2 yang dilapiskan pada Polipropilena (PP). Proses pabrikasi material PP/TiO2 dilakukan dengan teknik deposisi thermal milling. Temperatur kostan yang digunakan dalam proses milling adalah 175 selama 60 menit. Material PP/TiO2 digunakan sebagai material penyangga pada fotodegradasi metilen biru (MB). Proses fotokatalisis berlangsung selama 40 jam dengan sinar lampu UV sebagai suber foton dan penambahan bahan fotokatalis yang disinari UV dan tanpa disinari

Style APA, Harvard, Vancouver, ISO itp.

9

Fendri, Sandra Tri Juli, Dedi Nofiandi, Epi Supri Wardi, and Aprila Reza Yuris. "Fotolisis Senyawa Parasetamol Yang Berpotensi Dalam Penanganan Limbah Obat." Jurnal Katalisator 3, no. 2 (2018): 134. http://dx.doi.org/10.22216/jk.v3i2.3671.

Pełny tekst źródła

Streszczenie:

Parasetamol merupakan salah satu obat analgetik dan antipiretik paling popular dan banyak digunakan. Konsentrasi parasetamol dalam air limbah akan naik dengan meningkatnya produksi parasetamol. Suatu alternatif dalam menjawab permasalahan tersebut adalah dengan prosespengolahan limbah secara kimia menggunakan metoda fotolisis. Degradasi parasetamol telah dilakukan dengan metoda fotolisis menggunakan lampu UV 10 watt (λ = 253nm) dan (λ =352 nm).Analisis hasil degradasi menggunakan Spektrofotometer UV-Vis dan HPLC pada panjang gelombang 256 nm. Pengukuran dengan Spektrofotometer UV-Vis dan HPLC

Style APA, Harvard, Vancouver, ISO itp.

10

Ulfa, Ana Maria. "ANALISIS KROMATOGRAFI LAPIS TIPIS (KLT) TERHADAP FRAKSI N- HEKSAN DAN KLOROFORM PADA TANAMAN DAUN BIDARA ARAB (ZIZIPUS MAURITIANA L)." JIMR : Journal Of International Multidisciplinary Research 3, no. 02 (2024): 120–25. https://doi.org/10.62668/jimr.v3i02.1327.

Pełny tekst źródła

Streszczenie:

Tanaman Bidara Arab (Zizipus mauritiana) adalah tanaman yang tumbuh di daerah tropis dan sub tropis. Manfaat dari tanaman ini adalah antiinflamasi analgetik antipiretik dan antikanker (Siregar m, 2020). Tujuan dari penelitian ini adalah untuk mengetahui kandungan senyawa kimia yang terdapat pada tanaman Bidara arab secara kromatografi lapis tipis. Penelitian ini mengguanakan sampel fraksi n- Heksan dan fraksi kloroform. Metode dalam penelitian ini menggunakan eluent kloroform dan etilasetat (7:3) analisis kualitatif secara visual dengan kromatografi lapis tipis (KLT). Hasil niai Retention fact

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Rozprawy doktorskie na temat "Lampu UV"

1

Elgamil, Jamal E. M. "Development and optimisation of UV microwave germicidal lamp." Thesis, University of Liverpool, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.266312.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Kahánek, Tomáš. "Mikroprocesorové řízení ohřevu bazénu se slunečními kolektory." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230298.

Pełny tekst źródła

Streszczenie:

This thesis is pointed on draft of controller unit, used for control of swimming pool with solar collectors. Controller detect water temperature in a pool and collerctor. With these values controller control pump activation and 3-way valve position. Operator can set all settings in user interface which are needed for a right working. Controller unit attempt minimize energy used for a pump while working.

Style APA, Harvard, Vancouver, ISO itp.

3

Florez, Rubio David Magin. "Power Supplies for the Study and Efficient use of DBD Excimer UV Lamps." Phd thesis, Toulouse, INPT, 2014. http://oatao.univ-toulouse.fr/11157/1/florez_rubio.pdf.

Pełny tekst źródła

Streszczenie:

With the aim to provide a scientific tool for the enhancement of the Dielectric Barrier Discharge (DBD) Excimer Lamps (Excilamp) performance, a current-mode converter that allows an accurate adjustment of the electrical power injected into one of those lamps, is designed and implemented. With the proposed converter, the current supplied to the lamp has a square shape, controlled by means of three parameters: amplitude, duty cycle and frequency, which provides full control of the lamp electrical power. Implementation is made considering a step-up transformer interfacing the high-voltage lamp wi

Style APA, Harvard, Vancouver, ISO itp.

4

Sehnaoui, Karim. "Fouling of UV lamp sleeves : exploring inconsistencies in the role of iron." Thesis, McGill University, 2001. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=31068.

Pełny tekst źródła

Streszczenie:

This paper investigates the effects of water quality parameters on fouling rates of UV lamp sleeves, through the results of various published studies performed by different groups as well as by the author.<br>As part of this study, a pilot UV system was installed at the effluent line of two different biological wastewater treatment plants. The first plant included biofilters supplemented by alum addition during the summer for phosphorus removal. The second plant used an oxidation ditch and no coagulants were added. Iron was added to the UV pilot system influent in both cases to simulate post-c

Style APA, Harvard, Vancouver, ISO itp.

5

Peng, Ji 1974. "Characterization of permanent fouling on the surfaces of UV lamps used for disinfection." Thesis, McGill University, 2002. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=79254.

Pełny tekst źródła

Streszczenie:

This research investigated the origins and formations of permanent fouling. Four instrumental analyses were employed. They were Sleeve UV Transmittance (SUVT), Atomic Force Microscope (AFM), X-Ray Fluorescence (XRF), and Scanning Electron Microscope (SEM) combined with Energy Dispersive X-ray Microanalysis (EDX).<br>It was verified that permanent foulants were trapped initially by the inherent holes and peaks on sleeve surfaces. After long term periodical chemical/mechanical cleaning, the wipers of cleaning systems would damage sleeve surfaces severely, causing scratches or holes with w

Style APA, Harvard, Vancouver, ISO itp.

6

Torfgård, Olof. "Short wavelength UV–LED photoinitiated radical polymerization of acrylate–based coating systems—A comparison with conventional UV curing." Thesis, Uppsala universitet, Strukturkemi, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-442431.

Pełny tekst źródła

Streszczenie:

The present work was performed at Sherwin–Williams Sweden group AB with the objective of comparing short-wavelength light emitting diodes (UVB/UVC) with the conventional mercury arc lamp as a curing method of acrylate-based, UV-paint undergoing free-radical polymerization when exposed to UV-radiation. Due to environmental and health risks, mercury-doped radiation sources will be phased out in the near future, according to the United Nations Minamata convention, hence new alternatives are needed. Light-emitting diodes differ from the mercury arc lamp as they provide semi-discrete output intensi

Style APA, Harvard, Vancouver, ISO itp.

7

Vigstrand, Oscar. "Development of an absorption model for gas discharge lamp simulation." Thesis, Malmö universitet, Malmö högskola, Institutionen för materialvetenskap och tillämpad matematik (MTM), 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:mau:diva-42518.

Pełny tekst źródła

Streszczenie:

Ultraviolet (UV) light has been used for disinfection purposes for over 100 years. Irradiation by UV light is a method to disinfect surfaces in order to prevent microbiological growth. At Tetra Pak this is of great importance as they are manufacturer of filling machines. Those filling machines must ensure a certain level of sterility on all packages produced. The irradiation process can be simulated using Geant4 which is a software package that tracks particles through matter. The simulation model used today does not consider the absorption of photons inside of medium-pressure UV lamps. By und

Style APA, Harvard, Vancouver, ISO itp.

8

Málek, Ludvík. "Klima komora pro zkoušení osobních vozidel." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-228964.

Pełny tekst źródła

Streszczenie:

The diploma thesis deals with the design of testing equipment, a climate chamber in particular, to simulate external weather conditions. The chamber walls are made of socalled sandwich insulation panels. Based on the wall thermal properties, heat loss of the chamber was calculated. The conditioned air is supplied by a distribution channel at sides of the chamber. The exhaust air leaves the chamber in the ceiling zone. The ventilation unit is located on the ceiling. The design includes the integration of the UV lamp, simulating sunlight. The chamber will allow the weather effects on the microcl

Style APA, Harvard, Vancouver, ISO itp.

9

Mattei, Ryan M. "Investigation of Photonic Annealing on the Atomic Layer Deposition Metal-Oxides Incorporated in Polymer Tunnel Diodes." The Ohio State University, 2019. http://rave.ohiolink.edu/etdc/view?acc_num=osu1574691625451168.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Strathmann, Marc. "Auswirkungen der Bestrahlung mit UVB, UVA-1 und PUVA-1 auf das Funktionsverhalten humaner dermaler Mastzellen nach Stimulation mit anti-IgE und Substanz P." Doctoral thesis, [S.l.] : [s.n.], 2004. http://deposit.ddb.de/cgi-bin/dokserv?idn=972615822.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Książki na temat "Lampu UV"

1

UV-C devices: Safety information : permissible human exposure = Dispositifs UV-C : information sur la sécurité : limites admissibles pour l'exposition humaine. 2nd ed. ISO, 2016.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Whillock, M. Ultraviolet Radiation Levels Associated with the Use of Fluorescent General Lighting, UV-A and UV-B Lamps in the Workplace and Home. National Radiological Protection Board, 1988.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Tarabain, AbdulRahman. The use of electronic ceramics and magnetic treatment to prevent fouling on UV lamp sleeves. 2005.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Tarabain, AbdulRahman. The use of electronic ceramics and magnetic treatment to prevent fouling on UV lamp sleeves. 2005.

Znajdź pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Części książek na temat "Lampu UV"

1

Lister, Graeme. "Electrodeless Lamps and UV Sources." In Handbook of Advanced Lighting Technology. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-00176-0_8.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Lister, Graeme. "Electrodeless Lamps and UV Sources." In Handbook of Advanced Lighting Technology. Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-00295-8_8-1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Swerdlow, A. J. "Skin Cancer Risks from Ultraviolet Lamps and Sunbeds." In Skin Cancer and UV Radiation. Springer Berlin Heidelberg, 1997. http://dx.doi.org/10.1007/978-3-642-60771-4_74.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

Ahmad, Shamim I., Luisa Christensen, and Elma Baron. "History of UV Lamps, Types, and Their Applications." In Advances in Experimental Medicine and Biology. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-56017-5_1.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

5

Korn-Müller, Andreas. "Mit der UV-Lampe auf Spurensuche – ein Leuchtspektakel." In Der Natur auf der Spur. Springer Berlin Heidelberg, 2023. http://dx.doi.org/10.1007/978-3-662-67398-0_5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

Bączyk, Aleksander, Tomasz Klekiel, Katarzyna Arkusz, Waldemar Woźniak, and Roman Stryjski. "Evaluation of Bactericidal and Virucidal Effectiveness of UV-C Lamps." In Innovations in Biomedical Engineering 2023. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-52382-3_20.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Korn-Müller, Andreas. "Searching for Traces with the UV Lamp—A Light Spectacle." In Scientific Secrets of Nature. Springer Berlin Heidelberg, 2024. https://doi.org/10.1007/978-3-662-69575-3_5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

8

Pryor, Wayne R., Gregory M. Holsclaw, William E. McClintock, et al. "Lyman-α Models for LRO LAMP from MESSENGER MASCS and SOHO SWAN Data." In Cross-Calibration of Far UV Spectra of Solar System Objects and the Heliosphere. Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-6384-9_5.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Guivan, Mykola, H. Motomura, and M. Jinno. "Xenon Iodide Exciplex Lamp as an Efficient Source for the UV Surface Cleaning and Water Decontamination." In Plasma for Bio-Decontamination, Medicine and Food Security. Springer Netherlands, 2011. http://dx.doi.org/10.1007/978-94-007-2852-3_20.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Esrom, Hilmar, Robert Seeböck, Marlène Charbonnier, and Maurice Romand. "Surface modification of polyimide with dielectric barrier discharges and with dielectric barrier discharge driven excimer UV lamps." In Polymer Surface Modification: Relevance to Adhesion, Volume 2. CRC Press, 2023. http://dx.doi.org/10.1201/9780429070419-20.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Lampu UV"

1

Stowe, R. W. "UV as the Energy Source for Industrial Processing of Coatings, Inks, and Adhesives." In SSPC 2003. SSPC, 2003. https://doi.org/10.5006/s2003-00046.

Pełny tekst źródła

Streszczenie:

Summary UV curing, the process of photoinitiated conversion of polymeric materials from a liquid to a solid, is a popular alternative to conventional drying. UV Curing is highly adaptable to a wide variety of coating applications, owing to some of its key attributes; it is (1) solventless, (2) low-temperature, (3) high speed, and (4) energy-efficient. The physical properties of UV-cured materials are substantially affected by the lamp systems used to cure them. The development of the intended properties can depend on how well these lamp factors are designed and managed. Key exposure factors ar

Style APA, Harvard, Vancouver, ISO itp.

2

Condini, Alessandro, Angela Giuliani, Carlo Trentalange, and Stefano Rossi. "UV-Curable Organic Coating for Corrosion Protection of Inner Surfaces of Pipelines." In CONFERENCE 2024. AMPP, 2024. https://doi.org/10.5006/c2024-21025.

Pełny tekst źródła

Streszczenie:

Abstract This study investigates using a novel solvent-free, UV LED-curable coating as a robust corrosion protection solution for the inner surface of steel pipelines. The properties of the UV-cured film were characterized in terms of reactivity, thermomechanical properties, and adhesion to metal substrates. The coating was then applied on the inside of steel pipelines and cured using a patented UV LED lamp specifically designed to fit in confined spaces. Finally, electrochemical impedance spectroscopy (EIS) characterization and accelerated cyclic electrochemical technique (ACET) were performe

Style APA, Harvard, Vancouver, ISO itp.

3

Tong, Bohao, Yu Chen, Xiaohan Hou, et al. "Research on Spectral Radiance Stability Under UV Region of Deuterium Lamp." In 2024 International Conference on Sensing, Measurement & Data Analytics in the era of Artificial Intelligence (ICSMD). IEEE, 2024. https://doi.org/10.1109/icsmd64214.2024.10920550.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

White, Jerry E., Jim D. Earls, Marvin L. Dettloff, and Marty J. Null. "Development and Evaluation of Terminally Epoxidized Triglycerides for Coatings Applications." In SSPC 2003. SSPC, 2003. https://doi.org/10.5006/s2003-00050.

Pełny tekst źródła

Streszczenie:

Abstract Epoxidized 10-undecenoic acid triglyceride, an experimental seed oil derivative that has a terminal epoxy group on each of the three acyl glyceride segments, has been found to have good reactivity with amine curatives and allows room temperature cures to be obtained. This behavior is in contrast to that of internally epoxidized triglycerides derived from soy bean and linseed oils which do not cure at room temperature and yellow badly when cured at higher temperatures. Coatings based on epoxidized 10-undecenoic acid triglyceride have also shown excellent UV stability. As an example, co

Style APA, Harvard, Vancouver, ISO itp.

5

Wei, Wei, Liuming Li, Chunpeng Gu, et al. "Light Output Efficiency of Surface-Mount Lamp Beads Based on New Solid-Liquid UV Encapsulation." In 2024 21st China International Forum on Solid State Lighting & 2024 10th International Forum on Wide Bandgap Semiconductors (SSLCHINA: IFWS). IEEE, 2024. https://doi.org/10.1109/sslchinaifws64644.2024.10835257.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

6

De Oro, Luis A., Guilherme de A. Melo, and Carlos A. Canesin. "UV dose investigation for imersed lamp purifier for electronic ballast UV lamps design." In 2014 16th International Power Electronics and Motion Control Conference (PEMC). IEEE, 2014. http://dx.doi.org/10.1109/epepemc.2014.6980612.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

7

Jašúrek, Bohumil, Jan Vališ, and Tomáš Syrový. "Development of new UV LED curable inkjet varnishes." In 11th International Symposium on Graphic Engineering and Design. University of Novi Sad, Faculty of technical sciences, Department of graphic engineering and design, 2022. http://dx.doi.org/10.24867/grid-2022-p9.

Pełny tekst źródła

Streszczenie:

We have prepared three UV curable varnishes for inkjet printing that can be cured by UV LEDs (365–395 nm). The advantages of UV LEDs compared to medium pressure mercury lamps (conventional source of UV radiation) are lower energy consumption, possibility of immediate switching on/off, no IR radiation, no ozone generation and are mercury free. UV LEDs cannot effectively (or at all) cure formulations designed for mercury lamp curing. Developed UV varnishes enable the creation of special varnish effects on printed substrates (including 3D) thanks to partial curing with UV LEDs. Evaluated properti

Style APA, Harvard, Vancouver, ISO itp.

8

Zheleznov, I. I. "STUDY OF METHODS FOR MEASURING THE OPTICAL CHARACTERISTICS OF LOW-PRESSURE MERCURY LAMPS." In CIE 2021 Conference. International Commission on Illumination, CIE, 2021. http://dx.doi.org/10.25039/x48.2021.po29.

Pełny tekst źródła

Streszczenie:

Obtaining experimental data on the electrical and photometric parameters of low-pressure tubular amalgam lamps with a discharge in a mixture of mercury vapor and inert gases at high current densities of 0.5-1.2 A/cm2 with frequencies of tens of kilohertz is one of the key problems of modern metrology. Since a full-fledged study of the properties of experimental samples of mercury lamps is impossible without a reliable method of photometric measurements, and for ozone lamps such a technique, taking into account the features of the object of study, has not yet been proposed, its development and

Style APA, Harvard, Vancouver, ISO itp.

9

Coohill, Thomas P. "Absorption Properties and Desirable Photon Fluxes for Experiments Using Biological Cells and Viruses in the Ultraviolet (100 nm - 400 nm) Wavelength Region." In Free-Electron Laser Applications in the Ultraviolet. Optica Publishing Group, 1988. http://dx.doi.org/10.1364/fel.1988.fc2.

Pełny tekst źródła

Streszczenie:

One of the persistent problems encountered in performing experiments with biological organisms in the ultraviolet (UV) region of the spectrum, is the availability of radiation sources with sufficient energy to elicit the desired response in a reasonable period of time. Hence, a large portion of UV photobiology has been conducted at wavelengths between 220 nm and 300 nm (1). Here certain important cellular chromophores, such as the genetic material DNA, absorb heavily and can be altered with the use of simple sources such as fluorescent lamps (eg. 254 nm "germicidal" lamps) or by more intense s

Style APA, Harvard, Vancouver, ISO itp.

10

Stowe, Richard W. "High-power UV lamps for industrial UV curing applications." In SPIE's 1996 International Symposium on Optical Science, Engineering, and Instrumentation, edited by Robert E. Huffman and Christos G. Stergis. SPIE, 1996. http://dx.doi.org/10.1117/12.257198.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Lampu UV"

1

Dickens, Brian, and Eric Byrd. Programs to Estimate UV Dosage and Damage. National Institute of Standards and Technology, 1999. http://dx.doi.org/10.6028/nist.ir.7500.

Pełny tekst źródła

Streszczenie:

The system of programs described in this paper is concerned with estimating the damage ensuing from exposure of specimens in dry and humid atmospheres to UV and visible radiation covering the solar range. Damage is monitored quantitatively by changes in IR spectra. The dose is estimated from UV spectra of the lamps and the interference filters (used to isolate a particular wavelength range). The dosage is estimated from the dose and the UV absorption of the specimens themselves. These programs allow rapid estimation of dosage and damage from regions of data, and manipulation and processing of

Style APA, Harvard, Vancouver, ISO itp.

2

Douglas VanOsdell and Karin Foarde. Defining the Effectiveness of UV Lamps Installed in Circulating Air Ductwork. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/807360.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Douglas VanOsdell and Karin Foarde. Defining the Effectiveness of UV Lamps Installed in Circulating Air Ductwork. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/810964.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

4

MacDonald, James D., Aharon Abeliovich, Manuel C. Lagunas-Solar, David Faiman, and John Kabshima. Treatment of Irrigation Effluent Water to Reduce Nitrogenous Contaminants and Plant Pathogens. United States Department of Agriculture, 1993. http://dx.doi.org/10.32747/1993.7568092.bard.

Pełny tekst źródła

Streszczenie:

The contamination of surface and subterranean drinking water supplies with nitrogen-laden agricultural wastewater is a problem of increasing concern in the U.S. and Israel. Through this research, we found that bacteria could utilize common organic wastes (e.g. paper, straw, cotton) as carbon sources under anaerobic conditions, and reduce nitrate concentrations in wastewater to safe levels. Two species of bacteria, Cellulomonas uda and a Comamonas sp., were required for dentitrification. Celulomonas uda degraded cellulose and reduced nitrate to nitrite. In addition, it excreted soluble organic

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!