Zaloguj się

Gotowe bibliografie tematyczne / Locknit / Artykuły w czasopismach

Kliknij ten link, aby zobaczyć inne rodzaje publikacji na ten temat: Locknit.

Artykuły w czasopismach na temat „Locknit”

Autor: Grafiati

Data publikacji: 3 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Sprawdź 50 najlepszych artykułów w czasopismach naukowych na temat „Locknit”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Przeglądaj artykuły w czasopismach z różnych dziedzin i twórz odpowiednie bibliografie.

1

Mitchell, L. C. "The Dyeing of Celanese Locknit Fabrics." Journal of the Society of Dyers and Colourists 63, no. 10 (2008): 324. http://dx.doi.org/10.1111/j.1478-4408.1947.tb02432.x.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

2

Mitchell, L. C. "The Dyeing of Celanese Locknit Fabrics." Journal of the Society of Dyers and Colourists 63, no. 4 (2008): 102–5. http://dx.doi.org/10.1111/j.1478-4408.1947.tb02455.x.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

3

Kurbak, Arif. "Models for basic warp knitted fabrics Part III: the two guide bar fabrics (Double Tricot, Locknit, Reverse Locknit, Satin, Sharkskin)." Textile Research Journal 89, no. 10 (2018): 1917–37. http://dx.doi.org/10.1177/0040517518779998.

Pełny tekst źródła

Streszczenie:

Two guide bar warp knitted fabrics are used as technical textile applications nowadays. In this, Part III of these series of papers, models for basic two guide bar warp knitted fabrics are created and given based on Parts I and II. Modeling of warp knitted fabrics started in the 1960s with some basic geometrical models and it was continued with using Non Uniform Basis Spline (NURBS) curves and surfaces. There were discontinuities in the loop parts in early created geometrical models and the NURBS models needed some control points from some sources. In this work instead of using NURBS curves, m

Style APA, Harvard, Vancouver, ISO itp.

4

Ajeli, Saeed, and Zoleykhah Ahmadvand. "Investigation of the Two-Bar Warp-Knitted Fabric Structure Effect on Luster Value." Journal of Engineered Fibers and Fabrics 9, no. 2 (2014): 155892501400900. http://dx.doi.org/10.1177/155892501400900204.

Pełny tekst źródła

Streszczenie:

Consumer points of view determine economical value of fabrics. Fabric luster plays a momentous role in attracting people's attention, especially for clothing and domestic purposes. Luster is defined by intensity of both specular and diffuse light reflection off of a surface. There are various methods for measuring surface luster. Gloss. Luster is described as the ratio of specular reflection in one angle to diffuse reflection in another angle. Two-bar warp knitted polyester fabrics such as Tricot, Locknit, Satin, reverse Locknit and Sharkskin in three different densities were provided. A mini

Style APA, Harvard, Vancouver, ISO itp.

5

Chen, Qing, Pibo Ma, Haiwen Mao, Xuhong Miao, and Gaoming Jiang. "The Effect of Knitting Parameter and Finishing on Elastic Property of PET/PBT Warp Knitted Fabric." Autex Research Journal 17, no. 4 (2017): 350–60. http://dx.doi.org/10.1515/aut-2017-0014.

Pełny tekst źródła

Streszczenie:

Abstract This study investigated the elastic elongation and elastic recovery of the elastic warp knittedfabric made of PET( polyethylene terephthalate) and PBT(polybutylene terephthalate) filament. Using 50/24F PET and 50D/24F PBT in two threadingbars, the tricot, locknit and satin warp knitted fabrics were produced on the E28 tricot warpknitting machine. The knitting parameters influencing the elastic elongation under 100N wereanalyzed in terms of fabric structure, yarn run-in speed and drawing density set on machine.Besides, dyeing temperature and heat setting temperature/time were also exam

Style APA, Harvard, Vancouver, ISO itp.

6

Chang, Huey-Ling, Chih-Ming Chen, and Chun-Ying Lee. "The influences of corrosion on the tightening and anti-loosening properties of a flank-locking precision locknut." Journal of Mechanics 37 (2020): 44–52. http://dx.doi.org/10.1093/jom/ufaa014.

Pełny tekst źródła

Streszczenie:

ABSTRACT Locknut is a critical component used in the precision machinery and its stable service performance over a long period of time in a variety of different environments presents a crucial challenge. In this study, a flank-locking precision locknut was pretreated in an immersion corrosion of 5 wt% NaCl solution to simulate the possible corrosion effects. The tightening and loosening of the locknut after 0-, 1-, 2- and 4-h corrosion treatments, respectively, was tested according to the ISO 2320 Standard. An in-house test setup with horizontal configuration was employed in measuring the torq

Style APA, Harvard, Vancouver, ISO itp.

7

Lanarolle, W.D.G.* Weerasooriya W.M.N Madushika K.S.M and Tharsan G. "EFFECTS OF TENSION VARIATIONS OF INDIVIDUAL YARNS ON QUALITY OF WARP KNITTED FABRICS." INTERNATIONAL JOURNAL OF ENGINEERING SCIENCES & RESEARCH TECHNOLOGY 6, no. 7 (2017): 40–45. https://doi.org/10.5281/zenodo.822956.

Pełny tekst źródła

Streszczenie:

Yarns of warp beams to knit on warp knitting machines need to be wound at equal tensions. The tension variations lead to produce valleys and ridges of warp yarns on the beam and hence different lengths of individual warp yarns. These length variations lead to loop length variations in warp knitted fabrics and may cause defects along the wales. This research aimed at investigating the warp length variations caused by tension variations and its effect on the quality of the fabrics knitted. Tension variations of individual warp yarns on warp beams for warp knitting were examined. 16% of warp yarn

Style APA, Harvard, Vancouver, ISO itp.

8

Ardakani, Toba, Azita Asayesh, and Ali Asghar Asgharian Jeddi. "The influence of two bar warp-knitted structure on the fabric tensile stress relaxation Part II: (locknit, satin, loop raised)." Journal of The Textile Institute 107, no. 11 (2015): 1357–68. http://dx.doi.org/10.1080/00405000.2015.1111598.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

9

Dabiryan, H., Ali A. A. Jeddi, and A. Rastgoo. "Analysis of warp-knitted fabric structure. Part II: theoretical study on initial modulus of warp-knitted fabrics (tricot, locknit, and satin)." Journal of the Textile Institute 103, no. 9 (2012): 997–1011. http://dx.doi.org/10.1080/00405000.2012.654665.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

10

Hashemi, Nasrin, Azita Asayesh, Ali Asghar Asgharian Jeddi, and Toba Ardakani. "The influence of two bar warp-knitted structure on the fabric tensile stress relaxation Part I: (reverse locknit, sharkskin, queens’ cord)." Journal of The Textile Institute 107, no. 4 (2015): 512–24. http://dx.doi.org/10.1080/00405000.2015.1046288.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

11

Dabiryan, H., Ali A. A. Jeddi, and A. Rastgoo. "Analysis of warp-knitted fabric structure. Part III: theoretical study on initial modulus of warp-knitted fabrics (reverse locknit, three- and four-needle sharkskin)." Journal of The Textile Institute 103, no. 11 (2012): 1213–27. http://dx.doi.org/10.1080/00405000.2012.673297.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

12

Rudawska, Anna, Sławomir Cisz, and Tomasz Warda. "Selected Methods for Locking Screw Joints, Including the Use of Adhesives, Used in the Helicopter Construction." Technological Engineering 11, no. 2 (2014): 26–31. http://dx.doi.org/10.2478/teen-2014-0016.

Pełny tekst źródła

Streszczenie:

Abstract The paper presents the problems of preventing screw joints from self-loosening on one of helicopter. The research examines selected locking methods used in aircraft produced by different manufacturers. Experimental tests were performed to investigate the loosening torque of screw joints locked by various devices: cotter pin, locknut, centre punching, self-locking nut and adhesive. A comparative analysis of the investigated locking methods is made with respect to their locking strength and efficiency.

Style APA, Harvard, Vancouver, ISO itp.

13

Kajtez, Nemanja, Yue Zhang, and Basel Halak. "Lockit: A Logic Locking Automation Software." Electronics 10, no. 22 (2021): 2817. http://dx.doi.org/10.3390/electronics10222817.

Pełny tekst źródła

Streszczenie:

The significant rise in the cost of manufacturing nanoscale integrated circuits (ICs) has led the majority of IC design companies to outsource the fabrication of their products to other companies, often located in different countries. The multinational nature of the hardware supply chain has led to a host of security threats, including IP piracy, IC overproduction, and Trojan insertion. To combat these, researchers have proposed logic locking techniques to protect the intellectual properties of the design and increase the difficulty of malicious modification of its functionality. However, the

Style APA, Harvard, Vancouver, ISO itp.

14

Chen, C. M., and C. Y. Lee. "Optimization on the Performance of a Precision Flank-Locking Locknut Considering the Machining and Operational Parameters." Journal of Mechanics 35, no. 1 (2017): 41–49. http://dx.doi.org/10.1017/jmech.2017.84.

Pełny tekst źródła

Streszczenie:

AbstractIn this study, the anti-loosening characteristics of a precision flank-locking locknut fabricated under various machining processes and tested in different dynamic environments were investigated. The control parameters considered include the tightening torque and thread pitch of the set screw, machining process on the end plane of locknut, and vibration amplitude and frequency of dynamic loading in service, etc. Their sensitivities on the axial force ratio and anti-loosening ratio of the locknut were evaluated using Taguchi method. It was found that the pretension of locknut, the tight

Style APA, Harvard, Vancouver, ISO itp.

15

Chen, Chih Ming, and Cheng Ho Chen. "Discussion the Re-Use Precision Locknut of the Machine Tools Spindle in the Vertical Assembly Characteristics." Advanced Materials Research 853 (December 2013): 441–46. http://dx.doi.org/10.4028/www.scientific.net/amr.853.441.

Pełny tekst źródła

Streszczenie:

This paper is to investigate the characteristics of re-use precision locknuts of the machine tools spindles in the vertical assembly under different effective diameters, locking axial forces and clasp screw locking torques in the static tests for the axial force change rates. The results with the new flank locking precision locknuts are compared to the re-use nuts with different values; we obtain the decline of axial force change rates from predetermined equations using regress analysis to conduct experimental forecasts. In the experimental results, plastic deformation has occurred in re-use n

Style APA, Harvard, Vancouver, ISO itp.

16

Chen, C. M., H. L. Chang, and C. Y. Lee. "The Influence of Corrosion on the Anti-Loosening Performance of a Precision Locknut Subjected to Rotation and Periodic Impact." Journal of Mechanics 36, no. 3 (2019): 295–303. http://dx.doi.org/10.1017/jmech.2019.49.

Pełny tekst źródła

Streszczenie:

ABSTRACTThe influence of combined corrosion and vibration to the anti-loosening performance of a precision locknut used in a machine tool is investigated. Firstly, the locknut was submerged in 5% NaCl solution according to ASTM B895 standard for corrosion testing. The locknuts, after submerged in 1-hr, 2-hr and 4-hr periods, respectively, were then installed on the rotating spindle in a vertical dynamic impact tester for performing anti-loosening test. The initial installed pretension was 9800 N and the spindle was rotating in a constant speed of 1000 rpm. Turmogrease Li 802 EP lubricant was u

Style APA, Harvard, Vancouver, ISO itp.

17

Alifurochmah, Isty, and Endiyono Endiyono. "Design and development of unstuck tourniquet." MEDISAINS 21, no. 3 (2023): 102. http://dx.doi.org/10.30595/medisains.v21i3.17600.

Pełny tekst źródła

Streszczenie:

Background: Existing tourniquets often get stuck, so innovation is needed to develop unstuck tourniquets.Technic: The result of the development of the tourniquet is only to modify the location of the locking system. The locks are located on the right and left sides, with an internal locking system that uses a bent angle design, which functions as a spring force to push the lockout without obstacles. The outside of the locking system has nuts and bolts that hold the cuff tighter when used.Conclusion: The results of the development of this tourniquet are proven easy to use, comfortable, and unst

Style APA, Harvard, Vancouver, ISO itp.

18

Zimandy, A. J. C., and D. P. Hess. "Effect of Reuse of Locknuts with Prevailing Torque Locking Feature." Journal of Failure Analysis and Prevention 13, no. 2 (2013): 121–27. http://dx.doi.org/10.1007/s11668-013-9653-x.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

19

Dea Artha Melati, Ekowati Retnaningtyas, and Diniyah Kholidah. "Analisis Tingkat Pengetahuan Keselamatan dan Kesehatan Kerja (K3) Mengenai Lockout/Tagout (LOTO) terhadap Tindakan Tidak Aman (Unsafe Action) dalam Lockout/Tagout (LOTO) Pekerja Divisi Manufactur dan Divisi Enggenering pada PT. X Kabupaten Banyuwangi." Detector: Jurnal Inovasi Riset Ilmu Kesehatan 2, no. 3 (2024): 99–108. http://dx.doi.org/10.55606/detector.v2i3.4149.

Pełny tekst źródła

Streszczenie:

PT.X is a business located in Banyuwangi district, East Java. PT.X is engaged in manufacturing which produces mineral water. PT.X Banyuwangi's work procedures have implemented K3 in its work processes. The Lockout/Tagout (LOTO) locking and marking system has been implemented, but unsafe behavior is still found by workers when carrying out work processes using the Lockout/Tagout (LOTO) system, such as not using PPE during machine repair/maintenance processes, and not installing tags. . . during repairs. This research aims to analyze the level of K3 knowledge about Lockout/Tagout regarding unsaf

Style APA, Harvard, Vancouver, ISO itp.

20

Chen, C. M., C. H. Lee, D. S. Xu, and C. Y. Lee. "The Effect of Immersion Corrosion on the Surface Morphology of a Flank-Locking Precision Locknut." Experimental Techniques 43, no. 4 (2019): 479–90. http://dx.doi.org/10.1007/s40799-018-00302-y.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

21

Barranco, Guilherme Henrique Fernandes, Maria Stella Fernandes Villela, Gracila Heitor De Oliveira, et al. "Femoral Osteosynthesis in Black Capuchin Monkey (Sapajus nigritus) using Locking Plate." Acta Scientiae Veterinariae 46 (February 5, 2018): 5. http://dx.doi.org/10.22456/1679-9216.85154.

Pełny tekst źródła

Streszczenie:

Background: Locking bone plates for internal fixation are characterized by plates with a locknut by screwing in a threaded chamber. The increased stability associated with less vascular lesion contribute to the lower risk of complications and makes the locking bone plates especially interesting in fracture management of wild animals to be reintroduced into nature.The aim of this report is to describe the case of a black capuchin monkey with a femoral fracture, submitted to internal fixation using locking plate, with a satisfactory postoperative evolution, characterized by the bone consolidatio

Style APA, Harvard, Vancouver, ISO itp.

22

Wang, Hai Tao, Shi Feng Xu, and Li Ping Huang. "Renovation Design of Coal Powder Conveyor Bearing Support." Applied Mechanics and Materials 120 (October 2011): 335–38. http://dx.doi.org/10.4028/www.scientific.net/amm.120.335.

Pełny tekst źródła

Streszczenie:

The bearing support breakage of screw coal powder conveyor in power plant boiler went through four stages: axial displacement of shaft sleeve, shaft sleeve wearing by shield ring and by bearing, and the wearing of skeleton seal rings and dustproof felts by shaft sleeve. By analyzing the wearing characters of each part, the renovation structure was designed. The bearing settled style was changed from using shield ring to using locknut by designing convex sidestep on the shaft sleeve, preventing the axial from drifting. Substituting for the welding assembly, the bolt connecting between the cover

Style APA, Harvard, Vancouver, ISO itp.

23

Viburajah, Vidarshna, Venkatesh Selvaraj, Sree Kumar E J, and Sathish Kalyan. "Comparison of Epidural Catheter Migration in Three Different Techniques of Catheter Fixation: A Prospective Randomised Study." Journal of Anesthesiology and Reanimation Specialists' Society 31, no. 3 (2023): 203–9. http://dx.doi.org/10.54875/jarss.2023.59480.

Pełny tekst źródła

Streszczenie:

Objective: We hypothesized that subcutaneous tunnelling will be more efficacious in preventing epidural catheter migration in the postoperative period. To compare three different fixation techniques for migration of epidural catheter in the postoperative period. Methods: Patients undergoing elective surgery with planned postoperative analgesia with lumbar epidural were included. They were divided into 3 groups based on catheter fixation – Group I: transparent adhesive dressing tape, Group II: fixator device (Locklt Plus® ) and Group III: catheter subcutaneously tunnelled vertically. The cathet

Style APA, Harvard, Vancouver, ISO itp.

24

Chen, Chih Ming, and Cheng Ho Chen. "Friction Characteristics of Clasp Locked Precision Locknuts under Different Conditions." Advanced Materials Research 853 (December 2013): 447–52. http://dx.doi.org/10.4028/www.scientific.net/amr.853.447.

Pełny tekst źródła

Streszczenie:

As the machine tool industry moves towards high speed and high precision, we must have detection technology for the mechanical properties of fasteners, in order to overcome technical bottlenecks. This article is especially aimed at machine tools and special-purpose machines that commonly use clasp locking precision locknuts. In this research, the anti-loosening characteristics of precision nuts are investigated under different conditions, such as the clearances, end processing methods, nut cutting speeds, lubricants, and tightening speeds. The results can provide the precision nut manufacturer

Style APA, Harvard, Vancouver, ISO itp.

25

Chen, Chih Ming, and Chin Huang Sun. "The Study on the Wear Characteristics of Flank Lock Type Precision Locknut in the Dynamic Conditions." Applied Mechanics and Materials 541-542 (March 2014): 584–87. http://dx.doi.org/10.4028/www.scientific.net/amm.541-542.584.

Pełny tekst źródła

Streszczenie:

This study investigated the wear characteristics and anti-loosening characteristics of flank lock type precision locknut in the dynamic percussion vibration test. The experiment was conducted by using horizontal realistic dynamic percussion vibration test machine. The objective is to simulate the loosening condition of the locknut which was assembled in ball screw and machine tool spindle. Through this study, the wear resistance and anti-loosening characteristics of the precision locknut under the dynamic test were investigated by closely observing the roughness, flatness and tooth angle, seat

Style APA, Harvard, Vancouver, ISO itp.

26

Chen, C. M., and C. H. Sun. "A Study of Surface Characteristics of Flank Lock Type Precision Locknut Under a Vertical Installation." Journal of Mechanics 34, no. 1 (2016): 47–58. http://dx.doi.org/10.1017/jmech.2016.15.

Pełny tekst źródła

Streszczenie:

AbstractThe study attempted to observe the surface characteristics of the flank lock type precision locknut which was assembled in a vertical type and operates under different tightening speed. The speed setting was in according with the specifications of 4rpm, 6rpm and 8rpm conditions to set up this experiment. A type of 2TML lubricant was used. The experiment investigated the surface characteristics of a locknut, including contact surface flatness, contact surface roughness, and thread surface roughness before and after the designed test. According to the contact surface flatness of the lock

Style APA, Harvard, Vancouver, ISO itp.

27

Eliando, Eliando, and Ary Budi Warsito. "LockBit Black Ransomware On Reverse Shell: Analysis of Infection." CogITo Smart Journal 9, no. 2 (2023): 228–40. http://dx.doi.org/10.31154/cogito.v9i2.494.228-240.

Pełny tekst źródła

Streszczenie:

This research was conducted due to the widespread occurrence of ransomware attacks, especially in Indonesia, against data that is at the endpoint and has even reached the banking sector. to estimate the likelihood of future ransomware infections. LockBit 3 ransomware aka LockBit Black is ransomware that has penetrated one of the banks in Indonesia, along with a reverse shell which is an infection method that cannot be recognized by every protection so that when combined it can penetrate all sides of protection. The method used to research the combination of ransomware and reverse shell is a hy

Style APA, Harvard, Vancouver, ISO itp.

28

Kumar, Ravi. "Fingerprint based Bank Locker System using RFID." International Journal for Research in Applied Science and Engineering Technology 13, no. 5 (2025): 6307–13. https://doi.org/10.22214/ijraset.2025.71659.

Pełny tekst źródła

Streszczenie:

This paper presents the development and implementation of a microcontroller-based smart locker security system that integrates RFID and fingerprint biometric technologies to ensure secure and controlled access. The system utilizes an RFID module for administrative override and a fingerprint sensor for user authentication, combined with a servo motor to control the physical locking mechanism. An I2C LCD provides real-time feedback to users, and a buzzer offers audio alerts for system events. The built-in EEPROM of the Arduino Uno is used to store authorized fingerprint IDs, ensuring data persis

Style APA, Harvard, Vancouver, ISO itp.

29

Yang, C. C., Ding-Wei Huang, Chih-Wei Hsu, Sheng-Yau Liang, Choong-Wen Lay, and Ming-Shan Lin. "Passive Mode-Locking Techniques of Lasers." International Journal of High Speed Electronics and Systems 08, no. 04 (1997): 599–619. http://dx.doi.org/10.1142/s0129156497000238.

Pełny tekst źródła

Streszczenie:

In the frequency domain, mode-locking of a laser is to "lock" the relative phase of various iongitudinal modes in order to form pulses. In many applications, passive mode-locking is superior to active mode-locking because the former does not need any external active sources as required for the latter. For passive mode-locking, we only need certain nonlinear effects to produce pulse compression mechanisms in laser systems. When the compression mechanism is balanced with some broadening effects, such as group-velocity dispersion, stable pulses can be obtained. In this paper, we first review seve

Style APA, Harvard, Vancouver, ISO itp.

30

Blocki, Jeremiah, and Wuwei Zhang. "DALock: Password Distribution-Aware Throttling." Proceedings on Privacy Enhancing Technologies 2022, no. 3 (2022): 516–37. http://dx.doi.org/10.56553/popets-2022-0084.

Pełny tekst źródła

Streszczenie:

Large-scale online password guessing attacks are widespread and pose a persistant privacy and security threat to users. The common method for mitigating the risk of online cracking is to lock out the user after a fixed number (K) of consecutive incorrect login attempts. Selecting the value of K induces a classic security-usability trade-off. When K is too large, a hacker can (quickly) break into a significant fraction of user accounts, but when K is too low, we will start to annoy honest users by locking them out after a few mistakes. Motivated by the observation that honest user mistakes typi

Style APA, Harvard, Vancouver, ISO itp.

31

Hou, Kun, Hui Zhang, and Guang Jun Li. "Selection of Plate Self-Locking Nut." Applied Mechanics and Materials 599-601 (August 2014): 1249–52. http://dx.doi.org/10.4028/www.scientific.net/amm.599-601.1249.

Pełny tekst źródła

Streszczenie:

Through the correct assembly of various types of Plate Self-Locking Nuts, and their related mechanical properties test, on the premise of that Floating Two Lug Plate Self-Locking Nu, Floating Plate Self-Locking Nut, Cherry Rivetless Self-Locking Nut Plate, and Retainer Rivetless Plate Self-Locking Nut can satisfy the procurement specifications, use the same load levels on above four kinds of Plate Self-Locking Nuts to implement resisting shear connectors fatigue comparison test, and provide the basis for the selection of the Rivetless Plate Self-Locking Nut and its utilization in aircraft fati

Style APA, Harvard, Vancouver, ISO itp.

32

Moens, N. M. M., J. Runciman, G. Monteith, and S. Gordon. "The effect of the combination of locking screws and non-locking screws on the torsional properties of a locking-plate construct." Veterinary and Comparative Orthopaedics and Traumatology 23, no. 01 (2010): 7–13. http://dx.doi.org/10.3415/vcot-09-05-0055.

Pełny tekst źródła

Streszczenie:

SummaryLittle is known about the torsional properties of bone-plate constructs when a combination of locking and non-locking screws have been used. Sixty cadaveric canine femurs were divided into three groups. In the first group, the plate was affixed using three non-locking screws. In the second group, only locking screws were used while a combination of one locking and two non-locking screws were used in the third group. All constructs were subjected to torsion until failure. Torque, angle of torsion, and work were all calculated at the maximum failure point, as well as at five degrees of pl

Style APA, Harvard, Vancouver, ISO itp.

33

Eliando, Eliando, and Yunianto Purnomo. "LockBit 2.0 Ransomware: Analysis of infection, persistence, prevention mechanism." CogITo Smart Journal 8, no. 1 (2022): 232–43. http://dx.doi.org/10.31154/cogito.v8i1.356.232-243.

Pełny tekst źródła

Streszczenie:

This research was carried out due to the prevalence of ransomware attacks, especially in Indonesia against data located at Endpoints, in early 2022 ransomware was enough to horrify the news in cyberspace and one of the ransomware that is quite worrying in Indonesia is LockBit 2.0 ransomware, so research is needed against the ransomware. The method used to research the ransomware is static analysis and dynamic analysis which will show the infection and persistence of the LockBit 2.0 ransomware, the static analysis method is used by reverse engineering the portable executable (PE) file and the d

Style APA, Harvard, Vancouver, ISO itp.

34

Zhou, Kai-hua, and Nong Chen. "Locking versus Non-locking Neutralization Plates with Limited Excision and Internal Fixation for Treatment of Extra-articular Type a Distal Tibial Fractures." Open Orthopaedics Journal 11, no. 1 (2017): 57–63. http://dx.doi.org/10.2174/1874325001711010057.

Pełny tekst źródła

Streszczenie:

Purpose: This study aimed to compare the clinical, radiologic, and cost-effectiveness results between locking and non-locking plates for the treatment of extra-articular type A distal tibial fractures. Methods: We performed a retrospective review of AO/OTA 42-A1, A2 distal tibial fractures treated by plates from January 2011 to June 2013. Patients were divided to the locking plate group or the non-locking plate group. Clinical outcomes, radiographic outcomes, and hospitalization fee were compared between the two plates groups. Results: 28 patients were treated with a locking plate and 23 patie

Style APA, Harvard, Vancouver, ISO itp.

35

Yan, Ming, and Hai-Chao Liu. "Calculation method of locking torque based on elastic thin shell theory for hydraulic locking sleeve." Advances in Mechanical Engineering 9, no. 2 (2017): 168781401769269. http://dx.doi.org/10.1177/1687814017692696.

Pełny tekst źródła

Streszczenie:

The hydraulic locking sleeve is a key component of precision instruments such as five-axis machine tools, giant astronomical telescope, and satellite antenna. This is subjected to the action of pressure load causing large elastic deformation and locking the rotational freedom of feed shaft at any angle. The maximum locking torque is an important parameter for designing the hydraulic locking sleeve. First, the hydraulic locking sleeve is simplified as elastic thin cylindrical shell structure. Neglecting the bending and twisting effects, the calculation equations describing the deformation and s

Style APA, Harvard, Vancouver, ISO itp.

36

Dr. Vivek Jaglan, Ms Swati, Dr Shalini Bhaskar Bajaj,. "A NOVEL MULTI GRANULARITY LOCKING SCHEME BASED ON CONCURRENT MULTI -VERSION HIERARCHICAL STRUCTURE." INFORMATION TECHNOLOGY IN INDUSTRY 9, no. 1 (2021): 932–47. http://dx.doi.org/10.17762/itii.v9i1.221.

Pełny tekst źródła

Streszczenie:

We present an efficient locking scheme in a hierarchical data structure. The existing multi-granularity locking mechanism works on two extremes: fine-grained locking through which concurrency is being maximized, and coarse grained locking that is being applied to minimize the locking cost. Between the two extremes, there lies several pare to-optimal options that provide a trade-off between the concurrency that can be attained. In this work, we present a locking technique, Collaborative Granular Version Locking (CGVL) which selects an optimal locking combination to serve locking requests in a h

Style APA, Harvard, Vancouver, ISO itp.

37

Zhang, Yan Jun, Zi Ming Kou, Bao Fu Kou, and Jun Zhang. "Design and Simulate the Wedge Rope Locking Mechanism on the Basis of ANSYS." Advanced Materials Research 619 (December 2012): 290–97. http://dx.doi.org/10.4028/www.scientific.net/amr.619.290.

Pełny tekst źródła

Streszczenie:

Comparing to the common locking mechanisms, this paper designs a new type of rope locking device which applies the wedge self-locking principle and hydraulic force-amplifying mechanism. The dynamic simulation research on the locking rope device with the usage of the ANSYS/IS-DYNA, and the simulation shows that the locking rope device can realize the self-lock of the first rope; the force-amplifying mechanism can effectively improve the security and stability of the rope locking, and reduce the abrasion of the first rope. Meanwhile, the simulation results provide a theoretical basis for the des

Style APA, Harvard, Vancouver, ISO itp.

38

Yuan, Bao Feng, Sheng Gao, and Xiao Li. "Thermal Deformation Analysis on Joint-Locking Device Used in Space Deployable Equipment." Applied Mechanics and Materials 529 (June 2014): 282–85. http://dx.doi.org/10.4028/www.scientific.net/amm.529.282.

Pełny tekst źródła

Streszczenie:

The joint-locking device is an important component used to lock some equipments in the satellite. In this paper, a joint-locking device is designed to lock the deployable equipment in the satellite. The working principle of its locking mechanism is analyzed, exhibiting such characteristics as light weight, small dimensions and strong locking ability. Thermal deformation analysis on the joint-locking device is conducted using finite element method. The simulation results show that the joint-locking device possesses high thermal stability and can meet design requirements.

Style APA, Harvard, Vancouver, ISO itp.

39

Miramini, Saeed, Lihai Zhang, Martin Richardson, and Priyan Mendis. "The Role of Locking Plate Stiffness in Bone Fracture Healing Stabilized by Far Cortical Locking Technique." International Journal of Computational Methods 15, no. 04 (2018): 1850024. http://dx.doi.org/10.1142/s021987621850024x.

Pełny tekst źródła

Streszczenie:

The locking plate fixations have been developed to enhance bone healing by wide bridging of the fracture and allowing some level of interfragmentary movement (IFM) at the fracture site. However, the IFM induced by conventional locking plate constructs is not uniform at the fracture site and so result in asymmetric callus formation, and ultimately delayed healing. The far cortical locking technique has been recently innovated to address this issue by inducing a uniform IFM. However, the far cortical locking technique is still in its infancy and more research efforts are required before its prac

Style APA, Harvard, Vancouver, ISO itp.

40

Maples, Christopher G., and Ronald R. West. "Lockeia, not Pelecypodichnus." Journal of Paleontology 63, no. 5 (1989): 694–96. http://dx.doi.org/10.1017/s0022336000041330.

Pełny tekst źródła

Streszczenie:

The nomenclatorial history of the ichnogenera Lockeia and Pelecypodichnus has been confused by duality during the past 20 years. Many authors presume Pelecypodichnus is correct because Lockeia is a nomen oblitum. This presumption is rejected on both objective and subjective grounds. First, Lockeia is not a nomen oblitum. Two major gaps in the citational history of Lockeia exist, the first one of 35 years duration and the second of 43 years duration. Thus, no 50-year gap exists in the valid use of the name Lockeia. Second, the Committee on Zoological Nomenclature was not petitioned to declare L

Style APA, Harvard, Vancouver, ISO itp.

41

WADA, A., H. KUBOTA, H. HATANAKA, S. HOTOKEZAKA, H. MIURA, and Y. IWAMOTO. "The Mechanical Properties of Locking and Grasping Suture Loop Configurations in Four-Strand Core Suture Techniques." Journal of Hand Surgery 25, no. 6 (2000): 548–51. http://dx.doi.org/10.1054/jhsb.2000.0441.

Pełny tekst źródła

Streszczenie:

We have compared the effect of locking and grasping suture loop configurations in four-strand core suture techniques for tendon repair. Forty canine flexor digitorum profundus tendons were repaired with one of four suture techniques (the grasping cruciate, the double-modified grasping Kessler, the locking cruciate and the double-modified locking Kessler) and tested to failure in a tensile testing machine. The mode of failure in all the locking suture specimens was breakage of the sutures in the locking loops or at suture knots. The sutures did not pull out of the tendon, as was seen in the gra

Style APA, Harvard, Vancouver, ISO itp.

42

Qin, Qiang, Yun Wen Feng, and Yuan Sheng Feng. "Reliability Analysis of Over-Center Locking of Mechanism." Applied Mechanics and Materials 215-216 (November 2012): 95–100. http://dx.doi.org/10.4028/www.scientific.net/amm.215-216.95.

Pełny tekst źródła

Streszczenie:

Locking function of a mechanism plays a significant role in safety and reliability. The operating principles of over-center locking in typical mechanisms and influencing factors of reliability to mechanism over-center locking were illustrated. A universal reliability analytical model of over-center locking mechanism was built and the algorithm of over-center angles was proposed. The result shows that in a planar four-bar mechanism, the dimension of driven link and variation coefficients have prominent influence on the reliability of over-center locking. The models and methods proposed in the p

Style APA, Harvard, Vancouver, ISO itp.

43

Boretto, J. G., N. Pacher, D. Giunta, G. L. Gallucci, V. Alfie, and P. De Carli. "Comparative clinical study of locking screws versus smooth locking pegs in volar plating of distal radius fractures." Journal of Hand Surgery (European Volume) 39, no. 7 (2014): 755–60. http://dx.doi.org/10.1177/1753193413517806.

Pełny tekst źródła

Streszczenie:

The present study was performed to test the null hypothesis on no difference in stability of fixation after volar plating of intra-articular distal radius fractures (AO C2-C3) with either locking smooth pegs or locking screws in a clinical setting. A retrospective evaluation included adult patients with C2-C3 AO fractures treated with a volar plate with locking smooth pegs or locking screws. Radiographic assessment was performed to evaluate extra- and intra-articular parameters in the early postoperative period and after bone union. Twenty-seven consecutive patients were included. Thirteen cas

Style APA, Harvard, Vancouver, ISO itp.

44

Wolthuizen, D. J., and R. Akkerman. "Locking and Enrichment Strategies." Key Engineering Materials 651-653 (July 2015): 452–57. http://dx.doi.org/10.4028/www.scientific.net/kem.651-653.452.

Pełny tekst źródła

Streszczenie:

A short overview of different locking mechanisms is presented, in which the more recent locking phenomenon tension locking is placed. Tension locking is found during composite forming simulations and occurs when the element edges are unaligned with the fiber directions. Discontinuities in composite forming simulations show similarities with other weak discontinuities such as material interfaces and shear bands found during shear localization. Two enrichment strategies are explored to resolve tension locking in linear triangular elements.

Style APA, Harvard, Vancouver, ISO itp.

45

Melamed, Eitan, Richard M. Hinds, Michael B. Gottschalk, Oran D. Kennedy, and John T. Capo. "Comparison of Dorsal Plate Fixation Versus Intramedullary Headless Screw Fixation of Unstable Metacarpal Shaft Fractures." HAND 11, no. 4 (2016): 421–26. http://dx.doi.org/10.1177/1558944716628485.

Pełny tekst źródła

Streszczenie:

Background: Recently, intramedullary headless screw (IMHS) has shown promise as an alternative to dorsal plate fixation of metacarpal fractures. The purpose of this study was to assess the biomechanical performance of IMHS versus plating. We hypothesized that IMHS fixation provides inferior stability to plating. Methods: Metacarpal fracture model with 3-mm of volar gapping in forty-four human cadaveric metacarpals was created. The specimens were divided into 5 groups: Group 1, 1.5-mm non-locking plate; Group 2, 1.5-mm locking plate; Group 3, 2.0-mm non-locking plate; Group 4, 2.0-mm locking pl

Style APA, Harvard, Vancouver, ISO itp.

46

Liu, Xia, Ning Shan, Tuan Jie Liu, and Xue Yan Hu. "Dynamics System Simulation Study of Locking Mechanism for Aviation Aircraft Based CATIA and ADAMS." Advanced Materials Research 834-836 (October 2013): 1607–11. http://dx.doi.org/10.4028/www.scientific.net/amr.834-836.1607.

Pełny tekst źródła

Streszczenie:

Locking mechanism of aviation aircraft is very important for perform mission. In order to avoid motion interference of locking mechanism efficiency and ensure mission completion and flight safety, its motion interference is analyzed based on its working theory. The spatial distribution of locking mechanism is designed in reason. The 3D solid assembly model of locking mechanism is constructed by using CATIA software. By the seamless interface program Sim-Designer between CATIA and ADAMS, dynamics simulation of locking mechanism system is realized in the circumstance of ADAMS. Its motion law is

Style APA, Harvard, Vancouver, ISO itp.

47

Wang, Tao, Renjiang Zhu, Cunzhu Tong, Yunjie Liu, and Peng Zhang. "Dynamics Simulation of Self-Mode-Locking in a Semiconductor Disk Laser Using Delay Differential Equations." Photonics 9, no. 11 (2022): 859. http://dx.doi.org/10.3390/photonics9110859.

Pełny tekst źródła

Streszczenie:

Self-mode-locked semiconductor disk lasers possess compact resonant cavity and stable construction. These devices have a wide application prospect because of their picosecond to sub-picosecond pulse width, excellent beam quality and tailorable emission wavelength. In this paper, dynamics simulations of self-mode-locking in a semiconductor disk laser are performed by using delay differential equations for the first time. The corresponding conditions of different modality of mode-locking, including Q-switched mode-locking, continuous-wave mode-locking and harmonic mode-locking are calculated, an

Style APA, Harvard, Vancouver, ISO itp.

48

Wolthuizen, D. J., R. H. W. Ten Thije, and R. Akkerman. "Simple Tests as Critical Indicator of Intra-Ply Shear Locking." Key Engineering Materials 554-557 (June 2013): 512–20. http://dx.doi.org/10.4028/www.scientific.net/kem.554-557.512.

Pełny tekst źródła

Streszczenie:

Standard finite elements can exhibit the numerical artifact of intra-plyshear locking during forming simulations. The displacement fields of elementsare piecewise continuous and cannot correctly capturediscontinuities in the shear field. This shear locking is illustrated insimulations of bias-extension experiments with an unaligned mesh. Two simpletests were developed as a critical indicator of intra-ply shear locking intriangular elements. A single-element-test shows the origin of the locking anda pull-out test indicates locking caused by small misalignments of theelements.

Style APA, Harvard, Vancouver, ISO itp.

49

Pan, Xiao-Hua, Wen-Chuan Chen, Kun-Jhih Lin, Kang-Ping Lin, Cheng-Lung Tsai, and Hung-Wen Wei. "Effect of semi-rigid locking screws on the stiffness of a fracture-fixation construct: A conceptual finite-element study." Advances in Mechanical Engineering 11, no. 6 (2019): 168781401985457. http://dx.doi.org/10.1177/1687814019854577.

Pełny tekst źródła

Streszczenie:

Strong stiffness provided by locking-plate system has resulted in nonunion and delayed union for long bone fracture. Longer bone plate can lengthen the working length to reduce the structural stiffness of the fixation device but will enlarge skin incision. Using the semi-rigid locking screw may be helpful but the efficacy was unclear. In simulated fracture model, four rigid locking screws were continually inserted beneath the fracture gap. The other four rigid/semi-rigid locking screws were equally distributed or concentrated at screw holes superior to the fracture gap. Axial compressive load

Style APA, Harvard, Vancouver, ISO itp.

50

Liu, Qian, Zhi Gang Deng, and Xin Xiong. "A New Kind of Locking Device for Centrifuge Nacelle." Advanced Materials Research 490-495 (March 2012): 29–32. http://dx.doi.org/10.4028/www.scientific.net/amr.490-495.29.

Pełny tekst źródła

Streszczenie:

In this paper, a new kind of locking device is introduced. Aiming at the 1# centrifuge of CAEP(China Academy of Engineering Physics), the mechanical design of locking device has been done, and its maximum locking torque is 8000N•M. The simulation model has been established in ANSYS to obtain key parameters of the locking device, such as the thickness of shaft, the distribution of circular groove, the working pressure of oil source and so on. Through the test, the feasibility of the locking device is validated.

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!