Gotowe bibliografie tematyczne / Mechanical properties

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Mechanical properties”

Autor: Grafiati
Data publikacji: 4 czerwca 2021
Data aktualizacji: 25 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Mechanical properties”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Mechanical properties"

1

Sakamoto, Makoto, Kenji Sato, Koichi Kobayashi, Jun Sakai, Yuji Tanabe, and Toshiaki Hara. "Nanoindentation Analysis of Mechanical Properties of Cortical Bone(Bone Mechanics)." Proceedings of the Asian Pacific Conference on Biomechanics : emerging science and technology in biomechanics 2004.1 (2004): 43–44. http://dx.doi.org/10.1299/jsmeapbio.2004.1.43.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Gotoh, Masaru, Ken Suzuki, and Hideo Miura. "OS12-4 Control of Mechanical Properties of Micro Electroplated Copper Interconnections(Mechanical properties of nano- and micro-materials-1,OS12 Mechanical properties of nano- and micro-materials,MICRO AND NANO MECHANICS)." Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2015.14 (2015): 186. http://dx.doi.org/10.1299/jsmeatem.2015.14.186.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Dunca, J. "Mechanical properties of cereal stem." Research in Agricultural Engineering 54, No. 2 (2008): 91–96. http://dx.doi.org/10.17221/5/2008-rae.

Pełny tekst źródła
Streszczenie:
The paper deals with the measurement of the resonance frequencies of wheat stems with special respect to different wheat varieties. For the measurement, the dynamical method of the transverse frequency was used. Formulas were derived for the calculation of the bending toughness of stems. The <I>t</I>-test was used for the evaluation of the strength coefficient in bending for the samples of stems of different wheat varieties. The results can be used for the evaluation of the wheat resistance to lodging.
Style APA, Harvard, Vancouver, ISO itp.
4

Arak, Margus, Kaarel Soots, Marge Starast, and Jüri Olt. "Mechanical properties of blueberry stems." Research in Agricultural Engineering 64, No. 4 (2018): 202–8. http://dx.doi.org/10.17221/90/2017-rae.

Pełny tekst źródła
Streszczenie:
In order to model and optimise the structural parameters of the working parts of agricultural machines, including harvesting machines, the mechanical properties of the culture harvested must be known. The purpose of this article is to determine the mechanical properties of the blueberry plant’s stem; more precisely the tensile strength and consequent elastic modulus E. In order to achieve this goal, the measuring instrument Instron 5969L2610 was used and accompanying software BlueHill 3 was used for analysing the test results. The tested blueberry plant’s stems were collected from the blueberr
Style APA, Harvard, Vancouver, ISO itp.
5

Kiselov, V. S. "Mechanical properties of biomorphous ceramics." Semiconductor Physics Quantum Electronics and Optoelectronics 15, no. 4 (2012): 386–92. http://dx.doi.org/10.15407/spqeo15.04.386.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Namazu, Takahiro. "OS12-1 MEMS and Nanotechnology for Experimental Mechanics(invited,Mechanical properties of nano- and micro-materials-1,OS12 Mechanical properties of nano- and micro-materials,MICRO AND NANO MECHANICS)." Abstracts of ATEM : International Conference on Advanced Technology in Experimental Mechanics : Asian Conference on Experimental Mechanics 2015.14 (2015): 183. http://dx.doi.org/10.1299/jsmeatem.2015.14.183.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Kubík, Ľ., and V. Kažimírová. "Mechanical properties of pellets in compression." Research in Agricultural Engineering 61, Special Issue (2016): S1—S8. http://dx.doi.org/10.17221/17/2015-rae.

Pełny tekst źródła
Streszczenie:
The paper deals with the evaluation of mechanical properties of the cylinder pellet samples. The pellets were made from hay by the granulating machine MGL 200 (Kovonovak) provided by the Department of Production Engineering, Slovak University of Agriculture in Nitra. The pellets were submitted to compressive loading. The compressive loading curves of dependencies of force on strain and force on time were realised by the test stand Andilog Stentor 1000. Certain mechanical parameters were determined, namely the diameter of the sample, length of the sample, force at 10% of strain, force in the fi
Style APA, Harvard, Vancouver, ISO itp.
8

qizi, Naurizbaeva Raykhan Kayirbay, and Yusupov Alimjan Turabayevich. "The Mechanical andThermal Properties ofCeramic Materials." American Journal of Applied Science and Technology 5, no. 4 (2025): 98–101. https://doi.org/10.37547/ajast/volume05issue04-21.

Pełny tekst źródła
Streszczenie:
Ceramic materials are integral to numerous technological advancements due to their distinctive mechanical and thermal characteristics. This article explores the fundamental aspects of these properties, providing typical ranges and examples for common ceramic types such as alumina, silicon carbide, and zirconia. The analysis encompasses mechanical properties like hardness, flexural strength, compressive strength, fracture toughness, Young's modulus, and density, highlighting their high hardness and stiffness alongside inherent brittleness. Furthermore, the articleexamines thermal properties inc
Style APA, Harvard, Vancouver, ISO itp.
9

Han, Zhong Kai, Ming Liu, and Yin Jun Gao. "Mechanical Properties of Stone Masonry Mechanical Properties." Applied Mechanics and Materials 507 (January 2014): 277–80. http://dx.doi.org/10.4028/www.scientific.net/amm.507.277.

Pełny tekst źródła
Streszczenie:
The research presented the mechanical properties under compressive loads of a natural stone masonry. The characterization of the basic materials and different stone masonry prisms are included. Sandstone and low strength limecement mortar were used for this experimental work. The morphological characteristics of walls were also taken into account, in order to manufacture prism specimens that were as representative as possible of the Chinese typology. The experimental values were compared with the analytical in different masonry.
Style APA, Harvard, Vancouver, ISO itp.
10

Skalický, J. "Research of sugar-beet tubers mechanical properties." Research in Agricultural Engineering 49, No. 3 (2012): 80–84. http://dx.doi.org/10.17221/4956-rae.

Pełny tekst źródła
Streszczenie:
Approach to the problems of sugar-beet tubers surface damage dependence on harvesting technology. Investigation of sugar-beet tubers damage when falling on wood and iron surfaces and in the next case tuber damage caused by their fall on the tuber heap. Research of damage rate dependence on the fall height. Evaluation of damage rate was carried by the I.I.R.B. method (method used by all sugar-beet growing countries of Western Europe). The results refer that no considerable differences in damage rate after the fall on the wood or iron bottoms have been ascertained. The height of 1.5 m can be con
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Mechanical properties"

1

Conca, Luca. "Mechanical properties of polymer glasses : Mechanical properties of polymer glasses." Thesis, Lyon, 2016. http://www.theses.fr/2016LYSE1050/document.

Pełny tekst źródła
Streszczenie:
Ce manuscrit présente des récentes extensions au modèle PFVD, basé sur l'hétérogénéité de la dynamique des polymères vitreux à l'échelle de quelques nanomètres et résolu par simulation en 3D, afin de fournir une description physique unifiée des propriétés mécaniques et dynamiques des polymères vitreux soumis à déformation plastique. Trois sujets principaux sont traités : La plastification. Sous déformation, les polymères atteignent le seuil de plasticité (yield) à quelques pourcents de déformation et quelques dizaines de MPa. Nous proposons que l'énergie élastique absorbée à l'échelle des hété
Style APA, Harvard, Vancouver, ISO itp.
2

Guillou, Lionel. "Cell Mechanics : Mechanical Properties and Membrane Rupture Criteria." Thesis, Université Paris-Saclay (ComUE), 2016. http://www.theses.fr/2016SACLX041/document.

Pełny tekst źródła
Streszczenie:
L’athérosclérose est une maladie artérielle chronique qui est une des causes majeures d’accidents vasculaires cérébraux et de crises cardiaques. Cette thèse a pour objectif de mieux comprendre certains facteurs spécifiques impliqués dans le dévelopement de cette maladie en abordant cette problématique sous l’angle de la mécanique.Deux types de cellules qui jouent un rôle important dans le dévelopement et la progression de l’athérosclérose sont les cellules endothéliales adhérentes et les leucocytes non-adhérents (les globules blancs). Nous avons développé deux systèmes capables de mesurer les
Style APA, Harvard, Vancouver, ISO itp.
3

Miao, Yuyang. "Mechanics of textile composites : from geometry to mechanical properties /." Search for this dissertation online, 2005. http://wwwlib.umi.com/cr/ksu/main.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Loveless, Thomas A. "Mechanical Properties of Kenaf Composites Using Dynamic Mechanical Analysis." DigitalCommons@USU, 2015. https://digitalcommons.usu.edu/etd/4310.

Pełny tekst źródła
Streszczenie:
Natural fibers show potential to replace glass fibers in thermoset and thermoplastic composites. Kenaf is a bast-type fiber with high specific strength and great potential to compete with glass fibers. In this research kenaf/epoxy composites were analyzed using Dynamic Mechanical Analysis (DMA). A three-point bend apparatus was used in the DMA testing. The samples were tested at 1 hertz, at a displacement of 10 μm, and at room temperature. The fiber volume content of the kenaf was varied from 20%-40% in 5% increments. Ten samples of each fiber volume fraction were manufactured and tested. The
Style APA, Harvard, Vancouver, ISO itp.
5

Ozdemir, Gokhan. "Mechanical Properties Of Cfrp Anchorages." Master's thesis, METU, 2005. http://etd.lib.metu.edu.tr/upload/12605890/index.pdf.

Pełny tekst źródła
Streszczenie:
Due to inadequate lateral stiffness, many reinforced concrete buildings are highly damaged or collapsed in Turkey after the major earthquake. To improve the behavior of such buildings and to prevent them from collapse, repair and/or strengthening of some reinforced concrete elements is required. One of the strengthening techniques is the use of CFRP sheets on the existing hollow brick masonry infill. While using the CFRP sheets their attachment to both structural and non-structural members are provided by CFRP anchor dowels. In this study, by means of the prepared test setup, the pull-out stre
Style APA, Harvard, Vancouver, ISO itp.
6

Dimitriu, Radu. "Complex mechanical properties of steel." Thesis, University of Cambridge, 2009. https://www.repository.cam.ac.uk/handle/1810/218319.

Pełny tekst źródła
Streszczenie:
Whereas considerable progress has been reported on the quantitative estimation of the microstructure of steels as a function of most of the important determining variables, it remains the case that it is impossible to calculate all but the simplest of mechanical properties given a comprehensive description of the structure at all conceivable scales. Properties which are important but fall into this category are impact toughness, fatigue, creep and combinations of these phenomena. The work presented in this thesis is an attempt to progress in this area of complex mechanical properties in the co
Style APA, Harvard, Vancouver, ISO itp.
7

Drodge, Daniel Ryan. "Mechanical properties of energetic composites." Thesis, University of Cambridge, 2010. https://www.repository.cam.ac.uk/handle/1810/265501.

Pełny tekst źródła
Streszczenie:
This thesis presents research into the mechanical response of particulate polymer composites, both energetic and inert, that contributes towards the wider understanding of deformation and damage mechanisms in Polymer Bonded Explosive (PBXs). Specifically, high and low strain-rate compression experiments were performed on several composites, with a view to measuring their elastic properties. A brief review of PBXs, polymers and particulate composites forms chapter 1. A key piece of mechanical testing apparatus, the Split Hopkinson Pressure Bar (SHPB), is critically assessed in chapters 2 and 3.
Style APA, Harvard, Vancouver, ISO itp.
8

Rains, Jeffrey K. "Mechanical properties of tracheal cartilage." Thesis, University of British Columbia, 1989. http://hdl.handle.net/2429/27994.

Pełny tekst źródła
Streszczenie:
Large airways collapse has been implicated as one of the causes of maximal expiratory flow limitation. Since cartilage plays an important role in maintaining the form of these airways, an understanding of the mechanical properties of the cartilage is necessary for a better understanding of the mechanisms which limit maximal expiratory flow. This work establishes a technique whereby the tensile stiffness of human tracheal cartilage can be determined using uniaxial equilibrium tensile tests. A technique was developed in which standard shaped specimens were cut from tracheal cartilage rings and t
Style APA, Harvard, Vancouver, ISO itp.
9

Lintzén, Nina. "Mechanical properties of artificial snow." Licentiate thesis, Luleå tekniska universitet, Geoteknologi, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-16798.

Pełny tekst źródła
Streszczenie:
Mechanical properties of snow have been a subject of research since the mid-20th century. Theresearch done is based on natural snow. During the last decades the winter business industryhas been growing and also the interest for constructing buildings and artwork of snow. Suchconstructions are generally built using artificial snow, i.e. snow produced by snow guns. Up tothe present constructions of snow are designed based on knowledge by experience. Only minorscientific studies on artificial snow and its properties has been published. Hence it is ofimportance to investigate material properties f
Style APA, Harvard, Vancouver, ISO itp.
10

Root, Samuel E. "Mechanical Properties of Semiconducting Polymers." Thesis, University of California, San Diego, 2018. http://pqdtopen.proquest.com/#viewpdf?dispub=10745535.

Pełny tekst źródła
Streszczenie:
<p> Mechanical softness and deformability underpin most of the advantages offered by semiconducting polymers. A detailed understanding of the mechanical properties of these materials is crucial for the design and manufacturing of robust, thin-film devices such as solar cells, displays, and sensors. The mechanical behavior of polymers is a complex function of many interrelated factors that span multiple scales, ranging from molecular structure, to microstructural morphology, and device geometry. This thesis builds a comprehensive understanding of the thermomechanical properties of polymeric sem
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Mechanical properties"

1

Kambic, HE, and AT Yokobori, eds. Biomaterials' Mechanical Properties. ASTM International, 1994. http://dx.doi.org/10.1520/stp1173-eb.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

E, Kambic Helen, Yokobori A. Toshimitsu 1951-, and American Society for Testing and Materials., eds. Biomaterials' mechanical properties. ASTM, 1994.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Janssen, Jules J. A. Mechanical properties of bamboo. Kluwer Academic Publishers, 1991.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Pelleg, Joshua. Mechanical Properties of Nanomaterials. Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-74652-0.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Pelleg, Joshua. Mechanical Properties of Materials. Springer Netherlands, 2013. http://dx.doi.org/10.1007/978-94-007-4342-7.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Pelleg, Joshua. Mechanical Properties of Ceramics. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-04492-7.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Janssen, Jules J. A. Mechanical Properties of Bamboo. Springer Netherlands, 1991. http://dx.doi.org/10.1007/978-94-011-3236-7.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Pelleg, Joshua. Mechanical Properties of Materials. Springer Netherlands, 2013.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Janssen, Jules J. A. Mechanical Properties of Bamboo. Springer Netherlands, 1991.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Wachtman, J. B. Mechanical properties of ceramics. 2nd ed. Wiley, 2008.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Mechanical properties"

1

Perego, Gabriele, and Gian Domenico Cella. "Mechanical Properties." In Poly(Lactic Acid). John Wiley & Sons, Inc., 2010. http://dx.doi.org/10.1002/9780470649848.ch11.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Lü, L., and M. O. Lai. "Mechanical Properties." In Mechanical Alloying. Springer US, 1998. http://dx.doi.org/10.1007/978-1-4615-5509-4_7.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Lacroix, Damien, and Josep A. Planell. "Mechanical Properties." In Biomedical Materials. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-49206-9_8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Wesolowski, Robert A., Anthony P. Wesolowski, and Roumiana S. Petrova. "Mechanical Properties." In The World of Materials. Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-17847-5_6.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Benboudjema, Farid, Jérôme Carette, Brice Delsaute, et al. "Mechanical Properties." In Thermal Cracking of Massive Concrete Structures. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-76617-1_4.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Desnerck, Pieter, Veerle Boel, Bart Craeye, and Petra Van Itterbeeck. "Mechanical Properties." In Mechanical Properties of Self-Compacting Concrete. Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-03245-0_2.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Young, Robert J., and Peter A. Lovell. "Mechanical properties." In Introduction to Polymers. Springer US, 1991. http://dx.doi.org/10.1007/978-1-4899-3176-4_5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Feuerbacher, M., K. Urban, Ulrich Messerschmidt, et al. "Mechanical Properties." In Quasicrystals. Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527606572.ch5.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Rice, Roy. "Mechanical Properties." In Cellular Ceramics. Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527606696.ch4a.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Hack, Robert. "Mechanical Properties." In Encyclopedia of Earth Sciences Series. Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-319-12127-7_197-1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Mechanical properties"

1

Susner, Michael, Jonathan Goldstein, Ginka Exner, et al. "Thermo-Mechanical Properties of Orthorhombic PbGa2GeSe6." In Advanced Solid State Lasers. Optica Publishing Group, 2024. https://doi.org/10.1364/assl.2024.jtu2a.22.

Pełny tekst źródła
Streszczenie:
Linear thermal expansion in the 70-350 K range, and nanohardness and Young’s modulus at room temperature are measured for the newly developed quaternary nonlinear crystal PbGa2GeSe6 applicable in the mid-IR part of the spectrum.
Style APA, Harvard, Vancouver, ISO itp.
2

Kong, K., M. DeWitt, M. Danilich, B. Gillich, and M. B. Panzer. "Dynamic Mechanical Properties of Human Skin." In Personal Armour Systems Symposium. Royal Military Academy (Belgium), 2025. https://doi.org/10.52202/078352-0031.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Cleland, A. N. "Mechanical quantum resonators." In ELECTRONIC PROPERTIES OF NOVEL NANOSTRUCTURES: XIX International Winterschool/Euroconference on Electronic Properties of Novel Materials. AIP, 2005. http://dx.doi.org/10.1063/1.2103895.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Baum, Gary A. "Subfracture Mechanical Properties." In Products of Papermaking, edited by C. F. Baker. Fundamental Research Committee (FRC), Manchester, 1993. http://dx.doi.org/10.15376/frc.1993.1.1.

Pełny tekst źródła
Streszczenie:
Virtually all paper and board grades have one or more mechanical property specifications. These are typically fracture properties, but the subfracture mechanical properties are also important. In many situations raw material and papermaking variables impact subfracture and fracture properties in similar and predictable ways. In this review we discuss the impact of fiber and paper machine variables on the mechanical properties of paper and board up to the point of failure. As with any real material, the physical properties (mechanical, optical, electrical, etc.) are not independent but depend u
Style APA, Harvard, Vancouver, ISO itp.
5

Williamson, David. "Mechanical Properties of PBS9501." In SHOCK COMPRESSION OF CONDENSED MATTER - 2003: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. AIP, 2004. http://dx.doi.org/10.1063/1.1780362.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Polyakov, Maxim, and Peter Schweitzer. "Mechanical properties of particles." In 23rd International Spin Physics Symposium. Sissa Medialab, 2019. http://dx.doi.org/10.22323/1.346.0066.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Kaplan-Ashiri, I. "Mechanical Properties of Individual WS2 Nanotubes." In ELECTRIC PROPERTIES OF SYNTHETIC NANOSTRUCTURES: XVII International Winterschool/Euroconference on Electronic Properties of Novel Materials. AIP, 2004. http://dx.doi.org/10.1063/1.1812096.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Niesz, K. "Mechanical cut of carbon nanotubes." In STRUCTURAL AND ELECTRONIC PROPERTIES OF MOLECULAR NANOSTRUCTURES: XVI International Winterschool on Electronic Properties of Novel Materials. AIP, 2002. http://dx.doi.org/10.1063/1.1514083.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Najidha, S., P. Predeep, N. S. Saxena, P. Predeep, S. Prasanth, and A. S. Prasad. "Dynamic Mechanical Properties of Natural Rubber∕Polyaniline Composites." In THERMOPHYSICAL PROPERTIES OF MATERIALS AND DEVICES: IVth National Conference on Thermophysical Properties - NCTP'07. AIP, 2008. http://dx.doi.org/10.1063/1.2927564.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Dixit, Manasvi, Vinodini Shaktawat, Kananbala Sharma, et al. "Mechanical Characterization of Polymethyl Methacrylate and Polycarbonate Blends." In THERMOPHYSICAL PROPERTIES OF MATERIALS AND DEVICES: IVth National Conference on Thermophysical Properties - NCTP'07. AIP, 2008. http://dx.doi.org/10.1063/1.2927574.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Mechanical properties"

1

Caskey, Jr, G. R. Mechanical Properties of Uranium Alloys. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/804673.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Luecke, William E., J. David McColskey, Christopher N. McCowan, et al. Mechanical properties of structural steel. National Institute of Standards and Technology, 2005. http://dx.doi.org/10.6028/nist.ncstar.1-3d.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Siegel, R. W., and G. E. Fougere. Mechanical properties of nanophase materials. Office of Scientific and Technical Information (OSTI), 1993. http://dx.doi.org/10.2172/10110297.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Solem, J. C., and J. K. Dienes. Mechanical Properties of Cellular Materials. Office of Scientific and Technical Information (OSTI), 1999. http://dx.doi.org/10.2172/759178.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Wallace, J. S., E. R. Jr Fuller, and S. W. Freiman. Mechanical properties of aluminum nitride substrates. National Institute of Standards and Technology, 1996. http://dx.doi.org/10.6028/nist.ir.5903.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

McEachen, G. W. Carbon syntactic foam mechanical properties testing. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/654103.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Neuman, A. D., M. J. Blacic, M. Platero, R. S. Romero, K. J. McClellan, and J. J. Petrovic. Mechanical properties of melt-derived erbium oxide. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/296753.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Klueh, R. L., D. J. Alexander, and M. Rieth. Mechanical properties of irradiated 9Cr-2WVTa steel. Office of Scientific and Technical Information (OSTI), 1998. http://dx.doi.org/10.2172/330624.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

McCoy, H. E., and J. F. King. Mechanical properties of Inconel 617 and 618. Office of Scientific and Technical Information (OSTI), 1985. http://dx.doi.org/10.2172/711763.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Switzner, Nathan T. Stainless Steel Microstructure and Mechanical Properties Evaluation. Office of Scientific and Technical Information (OSTI), 2010. http://dx.doi.org/10.2172/1129927.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Mechanical properties” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii