Gotowe bibliografie tematyczne / Metal-Based Baskets

Spis treści

Artykuły w czasopismach
Streszczenia konferencji

Gotowa bibliografia na temat „Metal-Based Baskets”

Autor: Grafiati

Data publikacji: 2 czerwca 2025

Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Metal-Based Baskets”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Metal-Based Baskets"

International, Journal of Medical Science and Innovative Research (IJMSIR). "Preclinical Evaluation of A Stone Retrieval Basket For Ureteral And Renal Stone Removal Using A Swine Model." International Journal of Medical Science and Innovative Research (IJMSIR) 9, no. 5 (2024): 131–35. https://doi.org/10.5281/zenodo.15431762.

Pełny tekst źródła

Streszczenie:

<strong>Abstract</strong> Kidney stone disease is a relatively common urological disorder, affecting a significant portion of the global population. It is characterized by the formation of crystal concretions, typically within the kidneys. If left untreated, kidney stones can lead to an increased risk of end-stage renal failure. The etiology of kidney stones is multifactorial, with the most common type being calcium oxalate stones formed at Randall's plaque on the renal papillary surfaces. Currently, there is a lack of satisfactory drug treatments to cure or prevent kidney stone recurrences. F

Style APA, Harvard, Vancouver, ISO itp.

Mokhtari, Bahram, and Kobra Pourabdollah. "Extraction of s-block metals by nano-baskets of calix[4]crown-3." Canadian Journal of Chemistry 90, no. 6 (2012): 560–66. http://dx.doi.org/10.1139/v2012-020.

Pełny tekst źródła

Streszczenie:

Three kinds of nano-baskets including 1,2-alternate and cone conformers of di-ionizable p-tert-butylcalix[4]arene-1,2-crown-3 and the cone conformer of p-tert-butylcalix[4]arene-1,2-thiacrown-3 were synthesized and the competitive solvent extractions of alkali and alkaline earth metal cations were studied. The novelty of this study is including three binding units of the calixarene’s bowl, the crown ether’s ring, and electron-donor ionizable moieties in a unique scaffold, in which their sizes were selected based upon their complexation ability to show equal binding tendency towards the cations

Style APA, Harvard, Vancouver, ISO itp.

Pander, Joachim, Andreas H. Dobler, Philipp Hoos, and Juergen Geist. "Environmental Pollution by Lost Fishing Tackle: A Systematic Assessment in Lake Eixendorf." Environments 9, no. 11 (2022): 144. http://dx.doi.org/10.3390/environments9110144.

Pełny tekst źródła

Streszczenie:

Environmental pollution by lost fishing tackle is hardly considered in freshwater management. We collected and classified lost angling tackle during the dewatering of Lake Eixendorf, Germany. Based on the results, 1 item per 100 m2 lake area was found, resulting in 5442 items, with an overall weight of more than 65 kg. This included more than 5 km of braided and monofilament fishing lines of various diameters. Lures used for active fishing methods such as stickbaits (shads and twister), metal spoons, spinners, and hard plastic baits had the greatest weight contribution (53.4%). Tackle lost fro

Style APA, Harvard, Vancouver, ISO itp.

Frank Meza-Cardenas, Alex, Jarol Richard Lazo-Selguera, Jose Luis Salinas-Blancas, Manuel Michael Beraun-Espiritu, Wilfredo Victor Morales-Santivanez, and Ethan Andre Beraun-Arroyo. "CAE Design of Maca Impurity Separator machine for Improving the Dehydration Process." E3S Web of Conferences 465 (2023): 01002. http://dx.doi.org/10.1051/e3sconf/202346501002.

Pełny tekst źródła

Streszczenie:

Over the years, there has been a massive expansion of maca crops in the province of Junín, causing a shortage of skilled labour, which has led to an increase in cost and time in the dehydration process in the production of maca. This is how the main problem arises: How do I design and manufacture a machine to separate impurities from maca to improve the dehydration process? The project is based on the design and manufacture of a device that helps to reduce the time spent in the cleaning area in the dehydration process, as this is where the most time is spent and in turn, generates more costs f

Style APA, Harvard, Vancouver, ISO itp.

A. O, Adekunmi, Kolawole, A. O, Owoeye R. S, and Atere, B. O. "Assessment of Women’s Participation in Fish Processing in Ekiti State, Nigeria." Asian Journal of Fisheries and Aquatic Research 26, no. 5 (2024): 71–81. http://dx.doi.org/10.9734/ajfar/2024/v26i5767.

Pełny tekst źródła

Streszczenie:

This research examined the involvement of women in various stages of fish processing in Ekiti State, Nigeria. A sampling method was used to select 90 women fish processors, and data was collected through structured interviews. The data was analyzed using descriptive statistics, such as frequencies, percentages, and means, along with charts. Additionally, probit regression analysis was conducted to identify socio-economic factors influencing women's participation in fish processing. The findings revealed that, on average, women involved in fish processing were 38.5 years old, with 57% being mar

Style APA, Harvard, Vancouver, ISO itp.

Zhang, He, Jing-Hua Lv, Kai Yu, et al. "1,4-Bis(imidazole)butane ligand and strontium(ii) directed 1-D chains based on basket-type molybdophosphates and transition metal (TM) linkers." CrystEngComm 17, no. 32 (2015): 6110–19. http://dx.doi.org/10.1039/c5ce00820d.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

ISAAC, KWABENA AGYEI, and JOE ADU-AGYEM DR. "DESIGN AND PRODUCTION OF TROPHIES FOR SELECTED SPORTS AND GAMES IN KNUST." Journal of Science and Technology 30, no. 1 (2010): 54–61. https://doi.org/10.5281/zenodo.4012438.

Pełny tekst źródła

Streszczenie:

Design and production of trophies for games and sports particularly in a form of metal art has been in existence for so many years. Presently they are practiced with much improvement and modern technology as compared to the ancient times where leaves, horns and other objects were used as trophies to award warriors and those who excelled in other sporting disciplines. Trophies are said to be prizes or cups which are given to an individual, a group of people or a nation for performing excellently in any sporting activity such as tennis, football, volley ball, basket ball and horse racing etc. To

Style APA, Harvard, Vancouver, ISO itp.

Zhang, Shiwei, Baoqiang Cong, Zhi Zeng, Ying Liu та Lu Chai. "Tailoring Weldability for Microstructures in Laser-Welded Near-α Titanium Alloy: Insights on Mechanical Properties". Metals 14, № 6 (2024): 690. http://dx.doi.org/10.3390/met14060690.

Pełny tekst źródła

Streszczenie:

With the development of lightweight aerospace structures, the use of the high-quality and efficient laser welding of near-α titanium alloys has received widespread attention and favor thanks to its superior comprehensive performance. The welding experiment of 3 mm thick TA15 titanium alloy was carried out by YAG laser welding, and the material weldability, microstructure, microhardness, and mechanical properties of welded joints were systematically studied. The results indicated that laser welding of TA15 titanium alloy can produce well-formed welded joints without defects such as cracks and p

Style APA, Harvard, Vancouver, ISO itp.

Miroshnikova, A. V., A. S. Kazachenko, B. N. Kuznetsov, and O. P. Taran. "Reductive Catalytic Fractionation of Lignocellulosic Biomass: A New Promising Method of its Integrated Processing." Kataliz v promyshlennosti 21, no. 6 (2021): 425–43. http://dx.doi.org/10.18412/1816-0387-2021-6-425-443.

Pełny tekst źródła

Streszczenie:

The review discusses the results of recent studies in the promising field of integrated processing of lignocellulosic biomass – the reductive catalytic fractionation (RCF). The effect of catalysts, cocatalysts, solvents, hydrogen sources and features of lignocellulosic feedstock on the selectivity of monomeric products formation from lignin is considered. RCF processes are performed mostly with the heterogeneous catalysts, which allow implementing the reductive depolymerization of lignin to obtain low-molecular compounds and preserve carbohydrate components of biomass. Among the studied cataly

Style APA, Harvard, Vancouver, ISO itp.

Jeger, Raban, Matthias Pfisterer, Hannes Alber, et al. "Newest-generation drug-eluting and bare-metal stents combined with prasugrel-based antiplatelet therapy in large coronary arteries: The BAsel Stent Kosten Effektivitäts Trial PROspective Validation Examination part II (BASKET-PROVE II) trial design." American Heart Journal 163, no. 2 (2012): 136–41. http://dx.doi.org/10.1016/j.ahj.2011.08.023.

Pełny tekst źródła

Style APA, Harvard, Vancouver, ISO itp.

Więcej źródeł

Streszczenia konferencji na temat "Metal-Based Baskets"

Saegusa, Toshiari, Makoto Hirose, Norikazu Irie, and Masashi Shimizu. "Japanese Codes and Standards for Dual Purpose Metal Casks for Spent Nuclear Fuel." In 2014 22nd International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/icone22-30696.

Pełny tekst źródła

Streszczenie:

The first Japanese spent fuel interim storage facility away from a reactor site is about to be commissioned in Mutsu City, Aomori Prefecture. In designing, licensing and construction of the Dual Purpose Casks (DPCs, for transport and storage) for this facility, codes and standards established by the Atomic Energy Society of Japan (AESJ) and by the Japan Society of Mechanical Engineers (JSME) have been applied. The AESJ established the first standard for DPCs as “Standard for Safety Design and Inspection of Metal Casks for Spent Fuel Interim Storage Facilities” in 2002 (later revised in 2010).

Style APA, Harvard, Vancouver, ISO itp.

Farmer, J. C., J. S. Choi, S. D. Day, T. Lian, and P. D. Hailey. "High Performance Coatings for Spent Fuel Containers and Components." In ASME 2007 Pressure Vessels and Piping Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/pvp2007-26758.

Pełny tekst źródła

Streszczenie:

It has been found that the corrosion resistance of Fe-based amorphous-metal alloys can be improved dramatically through additions of chromium, molybdenum, and tungsten. The addition of yttrium lowers the critical cooling rate of these materials, but complicates the gas atomization process. High concentrations of boron enable these alloys to serve as effective neutron absorbers for criticality control applications. Since these alloys are Fe-based, any substitution of these for Ni-based alloys in the storage of spent nuclear fuel (SNF) applications could result in significant cost savings. Large

Style APA, Harvard, Vancouver, ISO itp.

Abdeyazdan, H., M. Shevchenko, J. Grogan, D. Graf, and E. Jak. "Experimental study and thermodynamic modelling of phase equilibria in the FeO-FeO1.5-SbO1.5-SiO2 system in equilibrium with metal." In 12th International Conference of Molten Slags, Fluxes and Salts (MOLTEN 2024) Proceedings. Australasian Institute of Mining and Metallurgy (AusIMM), 2024. http://dx.doi.org/10.62053/gsgh9425.

Pełny tekst źródła

Streszczenie:

An integrated experimental and thermodynamic modelling study of the phase equilibria in the FeO-FeO1.5-SbO1.5-SiO2 system in equilibrium with liquid Sb and Sb-Ag metal has been undertaken to develop thermodynamic model of the Na-Si-Fe-O slag system with S-Sn-Sb-Pb-As minor elements based on the experimental investigation of the selected sub-systems. New experimental phase equilibria data at 575–1600°C were obtained for this system using high-temperature equilibration of synthetic mixtures with predetermined compositions in sealed silica ampoules, Fe3O4 basket in sealed silica ampoule, or Re fo

Style APA, Harvard, Vancouver, ISO itp.

Ponnet, Mathieu, Michel Klein, André Rahier, Luc Noynaert, and Gérard Aleton. "Thorough Chemical Decontamination MEDOC®: An Effective Way to Reduce Metallic Waste Volume of the Dismantled Materials." In ASME 2001 8th International Conference on Radioactive Waste Management and Environmental Remediation. American Society of Mechanical Engineers, 2001. http://dx.doi.org/10.1115/icem2001-1308.

Pełny tekst źródła

Streszczenie:

Abstract The dismantling of the BR3-PWR reactor leads to the production of large masses of contaminated metallic pieces, including structural materials, primary pipings, tanks and heat exchangers. One of the main objectives is to demonstrate that we can minimise the volume of radioactive waste in an economical way, by the use of alternative waste routes, such as recycling of material in the nuclear world, free release of material in the conventional industry after melting or free release of material after thorough decontamination. The SCK•CEN launched a decontamination program with the aim to

Style APA, Harvard, Vancouver, ISO itp.

Park, Seik, Jugon Shin, Jungkeuk Park, Sanghyup Lee, and Nakjeong Choi. "Comparison of Hydrogen and Ammonia Co-Firing With Natural Gas Using a Practical Gas Turbine Combustor (501F) Under Atmospheric Conditions: Changes in Metal Temperature, Pattern Factor, and NOx Emission." In ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2023. http://dx.doi.org/10.1115/gt2023-103364.

Pełny tekst źródła

Streszczenie:

Abstract The world is undergoing energy transformation in various If global carbon neutrality is to be achieved by 2050, energy generation must improve. Here, we explore whether hydrogen and ammonia co-firing with natural gas (NG) in an industrial gas turbine improved the environmental performance of existing combined cycle power plants. Combustion tests were performed at atmospheric pressure under various conditions to define the safe operating range of a combustion test rig equipped with a real-world gas turbine combustor (501F). The combustion characteristics were evaluated under co-firing

Style APA, Harvard, Vancouver, ISO itp.

Cunningham, Violet, Alexander Tilton, Dylon Maertens, and Shawn Duan. "Innovative Design of Indoor-Outdoor Powerchair." In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-23497.

Pełny tekst źródła

Streszczenie:

Abstract People with disabilities often struggle with mobility issues, so there is a strong desire for devices such as powerchairs, which can provide more freedom. Currently, wheelchair demand in the US is increasing due to an upsurge in the elderly population. Often electric powerchairs suitable for outdoor use are extremely expensive, cannot be used indoors, and are not covered by medical insurance. In this project, these problems are addressed through the design of a chair which is suitable for both rough outdoor terrain and indoor use. This project is based on a request for a powerchair wh

Style APA, Harvard, Vancouver, ISO itp.

Komann, Steffen, Viktor Ballheimer, Thomas Quercetti, Robert Scheidemann, and Frank Wille. "Mechanical and Thermal Assessment by BAM of a New Package Design for the Transport of SNF From a German Research Reactor." In ASME 2020 Pressure Vessels & Piping Conference. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/pvp2020-21083.

Pełny tekst źródła

Streszczenie:

Abstract For disposal of the research reactor of the Technical University Munich FRM II a new transport and storage cask design was under approval assessment by the German authorities on the basis of International Atomic Energy Agency (IAEA) requirements. The cask body is made of ductile cast iron and closed by two bolted lid systems with metal seals. The material of the lids is stainless steel. On each end of the cask the wood-filled impact limiters are installed to reduce impact loads to the cask under drop test conditions. In the cavity of the cask a basket for five spent fuel elements is a

Style APA, Harvard, Vancouver, ISO itp.

Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!