Gotowe bibliografie tematyczne / Metal distribution

Spis treści

  1. Artykuły w czasopismach
  2. Rozprawy doktorskie
  3. Książki
  4. Części książek
  5. Streszczenia konferencji
  6. Raporty organizacyjne

Gotowa bibliografia na temat „Metal distribution”

Autor: Grafiati
Data publikacji: 3 czerwca 2025
Data aktualizacji: 31 lipca 2025

Utwórz poprawne odniesienie w stylach APA, MLA, Chicago, Harvard i wielu innych

Wybierz rodzaj źródła:

Zobacz listy aktualnych artykułów, książek, rozpraw, streszczeń i innych źródeł naukowych na temat „Metal distribution”.

Przycisk „Dodaj do bibliografii” jest dostępny obok każdej pracy w bibliografii. Użyj go – a my automatycznie utworzymy odniesienie bibliograficzne do wybranej pracy w stylu cytowania, którego potrzebujesz: APA, MLA, Harvard, Chicago, Vancouver itp.

Możesz również pobrać pełny tekst publikacji naukowej w formacie „.pdf” i przeczytać adnotację do pracy online, jeśli odpowiednie parametry są dostępne w metadanych.

Artykuły w czasopismach na temat "Metal distribution"

1

Cimermane, Inese, and Gotfrīds Noviks. "HEAVY METAL DISTRIBUTION IN SOIL." HUMAN. ENVIRONMENT. TECHNOLOGIES. Proceedings of the Students International Scientific and Practical Conference, no. 20 (April 20, 2016): 250–55. http://dx.doi.org/10.17770/het2016.20.3519.

Pełny tekst źródła
Streszczenie:
In this research was explored the distribution of heavy metals in soil. The information was gathered to find the main regularities between soil and metals. These regularities are important to understand due to the fact that the metal toxicity may cause negative influence on the ecosystems. This problem is especially relevant nowadays, when transport, agriculture and industrialization is developing every day.
Style APA, Harvard, Vancouver, ISO itp.
2

Karakus, C., and D. ‐T Chin. "Metal Distribution in Jet Plating." Journal of The Electrochemical Society 141, no. 3 (1994): 691–97. http://dx.doi.org/10.1149/1.2054793.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Damen, W., G. Abbel, and G. de Gendt. "Argon bubbles in slabs, a non-homogeneous distribution." Revue de Métallurgie 94, no. 6 (1997): 745–50. http://dx.doi.org/10.1051/metal/199794060745.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Wang, Chang J., Ibiye A. Roberts, and Diane J. Mynors. "Numerical Simulation of the Temperature Distribution during the Metal Laser Sintering of Parts." Applied Mechanics and Materials 16-19 (October 2009): 475–79. http://dx.doi.org/10.4028/www.scientific.net/amm.16-19.475.

Pełny tekst źródła
Streszczenie:
The Metal Laser Sintering (MLS) process has been developed over the last decade to produce 3D parts from CAD files using metal powders. A considerable amount of research has been conducted into the melting and solidifying process of metal powders, mainly to predict the temperature distribution in a single metal powder layer or a few layers. The temperature and thermal residual stress distribution in real parts built using MLS has rarely been reported. Finite element simulations of temperature distributions in metal powders and parts requires huge computing resources, this is the main obstacle
Style APA, Harvard, Vancouver, ISO itp.
5

AIKAWA, Tatsuo, Kyoko MIYAUCHI, Makiko ITO, and Ken NAKAJIMA. "Spatial Distribution of Metal Particles in Dried Metal Paste." Journal of the Japan Society of Colour Material 93, no. 5 (2020): 133–37. http://dx.doi.org/10.4011/shikizai.93.133.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Conte, G., M. C. Rossi, S. Salvatori, F. Tersigni, P. Ascarelli, and E. Cappelli. "Nonuniform current distribution in metal/diamond/metal vertical structures." Applied Physics Letters 82, no. 25 (2003): 4459–61. http://dx.doi.org/10.1063/1.1583855.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Zhang, Weiming, and Tomio Koyama. "Load Distribution of Metal Timing Belts." Journal of Mechanical Design 123, no. 1 (1999): 98–103. http://dx.doi.org/10.1115/1.1326917.

Pełny tekst źródła
Streszczenie:
Metal timing belt (perforation metal belt) is a new element of mechanical transmission and its application is increasing in many fields of industry in recent years. However, there has been almost no research on metal timing belt, especially its strength. In this paper, as a basic study on the strength of the metal timing belt, the distribution of the belt tension and the tooth load in metal timing belts is theoretically analyzed under the assumption that the belt pitch equals the pulley pitch. The tension distribution and the load distribution are the most important factors that influence the
Style APA, Harvard, Vancouver, ISO itp.
8

Jiao, Ke-xin, Jian-liang Zhang, Guangwei Wang, and Chunlin Chen. "Investigation of water distribution features among pipes in BF hearth." Metallurgical Research & Technology 116, no. 1 (2019): 121. http://dx.doi.org/10.1051/metal/2018052.

Pełny tekst źródła
Streszczenie:
The cooling system is important for the safety of blast furnace production. Measurements for over six months on a 1350 m3 blast furnace have shown that water volume distribution among the pipes in hearth is not uniform. The nature of the water volume distribution curve remains constant while furnace operation is normal, but is influenced by features of heat flux and hydrodynamic to the bustle pipe, which result in a 40–60% difference between maximum and minimum flow rates through individual pipe assemblies. A change in water volume is generally taken up by pipes that are working well. The wate
Style APA, Harvard, Vancouver, ISO itp.
9

Shen, Yao-zong, Kai Zhao, Zheng Kong, Yu-zhu Zhang, Yan Shi, and Yuan-hong Qi. "Three-dimensional numerical simulation of velocity field distribution in an oxy-coal combustor-melter-separator furnace." Metallurgical Research & Technology 118, no. 5 (2021): 510. http://dx.doi.org/10.1051/metal/2021066.

Pełny tekst źródła
Streszczenie:
In view of the influence of tuyere layout change on velocity field in oxy-coal combustor-melter-separator furnace, three-dimensional numerical simulation method was used to compare the distribution of velocity field in the furnace under different tuyere layout. The purpose is to explore the influence of the velocity distribution on the molten pool flow in the process of multi-tuyere injection. It is shown that the maximum velocity of the upper and lower tuyeres is 60 m/s and 50 m/s. And the change of tuyere has a significant effect on the velocity distribution in the molten pool, and the sudde
Style APA, Harvard, Vancouver, ISO itp.
10

Xu, Wenxuan, Fuming Zhang, Gele Qing, Yanglong Li, and Fengqin Wang. "Effect of the coke particle size distribution on the burden layer porosity of blast furnace." Metallurgical Research & Technology 121, no. 6 (2024): 618. http://dx.doi.org/10.1051/metal/2024078.

Pełny tekst źródła
Streszczenie:
The effect of the coke particle size distribution on the burden layer porosity of blast furnace were analyzed by DEM simulation in this study, and the uneven index proposed to achieve quantitative evaluation of the coke particle size distribution. The calculation results show that with the increase of uneven index of coke particle size distribution, 1) the total discharging time of coke discharged from hopper to throat process from 170 s decrease to 163 s. 2) the SI index of small particle is rising gradually but the SI index of large particle decreases gradually in the central region of the t
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Rozprawy doktorskie na temat "Metal distribution"

1

Dario, Mårten. "Metal distribution and mobility under alkaline conditions /." Örebro : Örebro universitetsbibliotek, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:oru:diva-66.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Liu, Yujing. "Finite element analysis of stress distribution within metal-on-metal joint replacements." Thesis, Edith Cowan University, Research Online, Perth, Western Australia, 2012. https://ro.ecu.edu.au/theses/471.

Pełny tekst źródła
Streszczenie:
Demand for joint replacements is rising in Australia, driven by a sharp increase in the number of joint problems associated with population aging and obesity. In artificial joints, delamination or failure within the coatings occurs when the stress reaches a critical level, resulting in large wear debris particles appearing on the contact surface between the head and the cup. The process has been described as due to a stress-corrosion-cracking mechanism. Under the same loading, stress increases when the contact area decreases, which happens in the vicinity of wear debris. As such, once wear deb
Style APA, Harvard, Vancouver, ISO itp.
3

Lampshire, Shelby. "Metal Dust Cloud Distribution Characterization Through Image Analysis." DigitalCommons@CalPoly, 2021. https://digitalcommons.calpoly.edu/theses/2333.

Pełny tekst źródła
Streszczenie:
With the increasing development of metal additive manufacturing technology, the present need for accurate explosivity testing of high density and exotic metal powders is under active research. The accuracy of such tests depends upon the uniformity of the dust dispersion within the testing chambers during ignition. There is a need for further research to understand the dust cloud dispersion process in order to determine the best time for ignition. This study explores a methodology of using high-speed footage and image analysis to characterize the uniformity of a dust cloud temporally that futur
Style APA, Harvard, Vancouver, ISO itp.
4

Duan, Zhiwei. "The Distribution of Toxic and Essential Metals in the Florida Everglades." FIU Digital Commons, 2012. http://digitalcommons.fiu.edu/etd/684.

Pełny tekst źródła
Streszczenie:
Concentrations of 18 metals, including toxic metals (As, Cd, Cr, Ni and Pb) and essential metals (Al, Ba, Be, Co, Cu, Fe, Li, Mg, Mn, K, Sr, V and Zn) in various compartments (sediment, floc, and periphyton) were measured in the Florida Everglades to (i) establish the spatial distribution pattern of the metals in the Everglades and (ii) quantify the major sources of the 18 metals present in the Everglades. The highest mean concentrations of all metals analyzed in the Everglades were detected in soil, followed by floc and periphyton. Most metals exhibited random spatial distribution patterns. R
Style APA, Harvard, Vancouver, ISO itp.
5

Starna, Steven. "Mineralogy and heavy metal distribution in cinders produced by coal combustion." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/mq64459.pdf.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Zhao, Yingkui. "Heavy metal distribution in floodplain sediments of the river Severn, UK." Thesis, University of the West of England, Bristol, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.327475.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Xiao, Hong. "Distribution of Metal Ions in Prostate and Urine during Prostate Carcinogenesis." University of Cincinnati / OhioLINK, 2011. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1310410436.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Williams, Kevin Vaughan Carleton University Dissertation Engineering Mechanical. "The numerical prediction of strain distribution in sheet metal forming operations." Ottawa, 1993.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Zhang, Hongzhi. "Material Distribution in Metal Plates for Buckling Control in Kinetic Facades." Thesis, The University of Sydney, 2022. https://hdl.handle.net/2123/29774.

Pełny tekst źródła
Streszczenie:
This thesis investigates the buckling and post-buckling behaviours of varied thickness distribution rectangular plates with three sides simply supported, one longitudinal edge free and a stress gradient applied to the two short edges. The primary aim of this thesis is to provide a design method for the thickness distribution of a plate that meets a design target for buckling behaviours. The main conclusion of this thesis is that a modified evolutionary structural optimisation (ESO) method satisfied the requirements of the design method and successfully controlled the buckling shape and bucklin
Style APA, Harvard, Vancouver, ISO itp.
10

Khan, Muhammad Munir Ahmed. "Effects of metal-on-metal hip replacement : clinical results and release, distribution and biological effects of wear debris." Thesis, Keele University, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.499344.

Pełny tekst źródła
Streszczenie:
This PhD thesis studies the performance of metal-on-metal bearings, which are used in hip arthroplasty. Three aspects in particular were studied, namely the clinical results, the release of cobalt and chromium wear debris from the bearings, and the effects of this debris on a cell's DNA. The clinical results showed that large diameter metal-on-metal bearing hip resurfacing (BHR) restored hip function to an excellent level and had an extremely low failure rate up to eight years after the operation. This makes a metal-on-metal bearing an attractive option for hip replacementin high-demand patien
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Książki na temat "Metal distribution"

1

Nuorteva, Pekka. Metal distribution patterns and forest decline: Seeking Achilles' heels for metals in Finnish forest biocoenoses. [Dept. of Environmental Conservation, University of Helsinki], 1990.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Nuorteva, Pekka. Metal distribution patterns and forest decline: Seeking Achilles' heels for metals in Finnish forest biocoenoses. University Press, 1990.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Pendleton, Colin F. Bronze age metalwork in northern East Anglia: A study of its distribution and interpretation. Archaeopress, 1999.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Pendleton, Colin F. Bronze age metalwork in northern East Anglia: A study of its distribution and interpretation. J. and E. Hedges, 1999.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

C, Stewart K., and Geological Survey (U.S.), eds. Metal distribution in overbank sediments from the Alamosa River, south-central Colorado. U.S. Geological Survey, 1995.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

(Organization), Metal Bulletin, and JSC Metal-Inform (Russia), eds. Russian metallurgy handbook: Ferrous and non-ferrous metals : production, trading and distribution companies of Russia. Metal Bulletin Books, 1998.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

Marriott, Philip. Angular and mass resolved energy distribution measurements with a gallium liquid metal ion source. University of Salford, 1987.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Wagner, Hilde, and Armin Schild. Der Flächentarif unter Druck: Die Folgen von Verbetrieblichung und Vermarktlichung. VSA, 2003.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Dreyhsig, Jörg. The multiplet problem of 3d transition metal impurities in semiconductors: General aspects and the specific properties of semiconductors doped with cobalt. W & T Verlag, 1994.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Henriques, Fernando S. Metal uptake and distribution in Rush (Juncus conglomeratus L.) plants growing in pyrites mine tailings at Lousal, Portugal. s.n, 1991.

Znajdź pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Więcej źródeł

Części książek na temat "Metal distribution"

1

Pinkerton, H. L. "Current and Metal Distribution." In Electroplating Engineering Handbook. Springer US, 1996. http://dx.doi.org/10.1007/978-1-4613-2547-5_15.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Gamburg, Yuliy D., and Giovanni Zangari. "Potential Distribution in the Electrolyte and Current Distribution on the Electrode Surface." In Theory and Practice of Metal Electrodeposition. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-9669-5_7.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

Gamburg, Yuliy D., and Giovanni Zangari. "Current Distribution at Rough Electrodes." In Theory and Practice of Metal Electrodeposition. Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4419-9669-5_8.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Drouza, Chryssoula, and Anastasios D. Keramidas. "Charge Distribution in Vanadiump-(Hydro/Semi)Quinonate Complexes." In Vanadium: The Versatile Metal. American Chemical Society, 2007. http://dx.doi.org/10.1021/bk-2007-0974.ch025.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Chowdhury, Farah Noshin, and Md Mostafizur Rahman. "Source and Distribution of Heavy Metal and Their Effects on Human Health." In Heavy Metal Toxicity. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-56642-4_3.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Barker, Shaun. "Where We Find Metals." In Heavy Metal. Open Book Publishers, 2024. http://dx.doi.org/10.11647/obp.0373.04.

Pełny tekst źródła
Streszczenie:
Mineral deposits are found in almost every environment on Earth—from the ocean floor, to high mountains, deserts and jungles. What factors control the distribution of minerals across our planet, and why do we mine in environmentally sensitive areas? This chapter describes the unique processes—asteroids, anoxic ocean waters, volcanoes and salty seas—that have led to the accumulation of large metal deposits on Earth over millions or even billions of years. By understanding these processes, we can better appreciate why particular types of mineral deposits occur where they do, and how mineral expl
Style APA, Harvard, Vancouver, ISO itp.
7

Gupta, Indarchand, Avinash Ingle, Priti Paralikar, Raksha Pandit, Silvio Silvério da Silva, and Mahendra Rai. "Bio-distribution and Toxicity of Noble Metal Nanoparticles in Humans." In Metal Nanoparticles in Pharma. Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-63790-7_21.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Kurita, Masanori, Makoto Sato, Ikuo Ihara, and Akira Saito. "Residual Stress Distribution of Ceramic-Metal Joint." In Advances in X-Ray Analysis. Springer US, 1990. http://dx.doi.org/10.1007/978-1-4613-9996-4_39.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
9

Nguyen, Ly Sy Phu, Thi Thuy Linh Do, Truong Gia Han Vo, Quoc Hau Le, and To Thi Hien. "The Source and Distribution of Heavy Metals in the Atmosphere Across Southeast Asia." In Heavy Metal Remediation. Springer Nature Switzerland, 2024. http://dx.doi.org/10.1007/978-3-031-53688-5_1.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Zdražil, M. "Effects of Catalyst Composition and Pretreatment on the Product Distribution in Hydrodesulphurization, Hydrodenitrogenation and Hydrodechlorination." In Transition Metal Sulphides. Springer Netherlands, 1998. http://dx.doi.org/10.1007/978-94-017-3577-3_11.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.

Streszczenia konferencji na temat "Metal distribution"

1

DASTUR, Pedram, Carl SLATER, and Claire DAVIS. "Effect of martensite distribution on strain distribution and uniform elongation in dual-phase steels; Comparison between a segregation neutralised grade and a commercial grade." In METAL 2024. TANGER Ltd., 2024. http://dx.doi.org/10.37904/metal.2024.4880.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

KAIJALAINEN, A. "Effect of surface characteristics on strain distribution in air- bending." In Metal Forming 2024. Materials Research Forum LLC, 2024. http://dx.doi.org/10.21741/9781644903254-37.

Pełny tekst źródła
Streszczenie:
Abstract. This study is a continuation of previous studies; therefore, the idea is to determine the influence of surface roughness and hardness on the bendability of a UHSS grade, and it is investigated with 3-point bending tests, utilizing Digital Image Correlation (DIC) for measuring the strain distributions on the outer curvature. Investigated bending samples of a 4 mm thick commercial bainitic-martensitic steel sheet were tested in different surface conditions: (1) as- rolled, (2) dry electropolished, (3) ultrasonic burnishing and (4) a combination of dry electropolishing and ultrasonic bu
Style APA, Harvard, Vancouver, ISO itp.
3

CERMAK, Jiri, Lubomir KRAL, and Pavla ROUPCOVA. "BALL-MILLED HYDROGEN STORAGE IN Mg-Cu – BASED ALLOYS MODIFIED BY KCl: DISTRIBUTION OF COMPONENTS." In METAL 2021. TANGER Ltd., 2021. http://dx.doi.org/10.37904/metal.2021.4213.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Shen, Yu, and Baocheng Yang. "Electric potential distribution of metal-metal junction." In Third International Conference on Thin Film Physics and Applications, edited by Shixun Zhou, Yongling Wang, Yi-Xin Chen, and Shuzheng Mao. SPIE, 1998. http://dx.doi.org/10.1117/12.300725.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

LOKOTUNINA, Natalya, Alexander PESIN, Denis PUSTOVOYTOV, and Dmitry GRACHEV. "FEM simulation of strain distribution through thickness of multilayered metal composite processed by asymmetric accumulative roll bonding." In METAL 2019. TANGER Ltd., 2019. http://dx.doi.org/10.37904/metal.2019.703.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

MERDER, Tomasz, Marek WARZECHA, Jacek PIEPRZYCA, and Artur HUTNY. "DESIGNING RESEARCH METHODOLOGY FOR DISTRIBUTION OF NON-METALLIC INCLUSIONS IN LIQUID STEEL DURING ITS FLOW THROUGH TUNDISH." In METAL 2019. TANGER Ltd., 2019. http://dx.doi.org/10.37904/metal.2019.790.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
7

DROŻDŻ, Paweł, Marcin RYWOTYCKI, Katarzyna MIŁKOWSKA-PISZCZEK, Paweł KRAJEWSKI, and Piotr PRZEGRAŁEK. "EFFECT OF CASTING SPEED AND SUPERHEAT TEMPERATURE ON TEMPERATURE DISTRIBUTION FOR THE BILLET SURFACE IN THE CONTINUOUS CASTING PROCESS." In METAL 2019. TANGER Ltd., 2019. http://dx.doi.org/10.37904/metal.2019.789.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Einwag, Jonathan-Markus. "Impact of the parameter distribution on the predictive quality of metamodels for clinch joint properties." In Sheet Metal 2025. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903551-35.

Pełny tekst źródła
Streszczenie:
Abstract. The growing significance of lightweight design, reveals drawbacks of conventional joining processes such as welding, which are known to consume a considerable amount of energy. This fosters the use of mechanical joining processes including clinching. However, the lack of universally applicable design methods results in a cost- and time-intensive design process. The utilization of machine learning methods can overcome these drawbacks. To ensure a reliable clinch joint design, inherent uncertainties of the design parameter such as tool deviations need to be considered in the design pro
Style APA, Harvard, Vancouver, ISO itp.
9

Bartosiewicz, Michał, and Adam Cwudziński. "liquid steel hydrodynamic structures in the three strand tundish with a modified ladle shroud based on the residence time distribution curves." In METAL 2019. TANGER Ltd., 2019. http://dx.doi.org/10.37904/metal.2019.674.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
10

Vanhulst, M. "Investigating intermediate shapes for multi-stage forming of cranial implants: The influence of two intermediates stages." In Sheet Metal 2025. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903551-10.

Pełny tekst źródła
Streszczenie:
Abstract. This study investigates the use of two intermediate shapes, constructed with an automatic design strategy, in Single Point Incremental Forming (SPIF) to improve thickness distribution and geometric accuracy for cranial implants. Previous work showed a trade-off between these two factors when using only one intermediate stage. In this research, five three-stage experiments were conducted, along with both a two-stage and a single-stage control. The intermediate shapes are constructed using z-scaling and z-translation techniques and the design is based on the outcome of experiments with
Style APA, Harvard, Vancouver, ISO itp.

Raporty organizacyjne na temat "Metal distribution"

1

Chmelka, B. F. Distribution of metal and adsorbed guest species in zeolites. Office of Scientific and Technical Information (OSTI), 1989. http://dx.doi.org/10.2172/6783704.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
2

Schmidt, Andrew J., and Monte R. Elmore. Settling Test Using Simulants to Evaluate Uranium Metal Distribution in K Basin Sludge. Office of Scientific and Technical Information (OSTI), 2002. http://dx.doi.org/10.2172/15010222.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
3

M A Ebadian, Ph D., S.K. Dua, Ph.D., C.H.P., and Ph D. Hillol Guha. SIZE DISTRIBUTION AND RATE OF PRODUCTION OF AIRBORNE PARTICULATE MATTER GENERATED DURING METAL CUTTING. Office of Scientific and Technical Information (OSTI), 2001. http://dx.doi.org/10.2172/793521.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
4

Koch, J. W. II. Phase 2 sampling for radionuclides and metal distribution in L-lake sediments. Final report. Office of Scientific and Technical Information (OSTI), 1996. http://dx.doi.org/10.2172/568929.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
5

Kettles, I. M. Metal distribution in peat hummocks and hollows within 100 km of the copper smelter, Rouyn-Noranda, Quebec. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 2005. http://dx.doi.org/10.4095/221142.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
6

Graville. L51764 Hydrogen Cracking in the Heat-Affected Zone of High-Strength Steels-Year 2. Pipeline Research Council International, Inc. (PRCI), 1997. http://dx.doi.org/10.55274/r0010170.

Pełny tekst źródła
Streszczenie:
During year 1 of this project a test to evaluate the sensitivity of the heat affected zone (HAZ) to hydrogen cracking was developed. This was in response to a need for a test which provided unambiguous results in contrast to existing test methods which often led to difficulties in interpretation. For example, WIC tests usually cracked in the weld metal rather than the HAZ and therefore did not produce a clear indication of the sensistivity of the HAZ. The new test involves a machined notch which can be placed in the HAZ thus forcing crack initiation to occur in the desired region. A further ad
Style APA, Harvard, Vancouver, ISO itp.
7

Whitten, J. E., C. E. Young, M. J. Pellin, D. M. Gruen, and P. L. Jones. Direct detection of neutral metal atoms in electron-stimulated desorption: Al from CH{sub 3}O/Al(111) - velocity distribution and absolute yield. Office of Scientific and Technical Information (OSTI), 1994. http://dx.doi.org/10.2172/10160954.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
8

Maxey. L51427 ERW Weld Zone Characteristics. Pipeline Research Council International, Inc. (PRCI), 1992. http://dx.doi.org/10.55274/r0011187.

Pełny tekst źródła
Streszczenie:
The objective of this research project was to determine the fatigue characteristics of the weld zone of electric resistance welded (ERW) pipe. The project involved: (1) characterizing pipe samples in terms of initial defects, tensile and yield strength, chemistry, and fracture toughness, (2) evaluating the fatigue crack growth of base metal and the weld zone in air and a 3.5 wt% NaCl solution, and (3) evaluating the fatigue crack growth of machined defects in the weld zone of ERW pipe subjected to cyclic pressure loading. This study found that the weld zone and base metal exhibit the same fati
Style APA, Harvard, Vancouver, ISO itp.
9

Cawood, T. K., and J. M. Peter. The geology of critical battery metals: a spotlight on Co in VMS deposits and Li in pegmatites. Natural Resources Canada/CMSS/Information Management, 2024. http://dx.doi.org/10.4095/332348.

Pełny tekst źródła
Streszczenie:
As we move away from a fossil fuel-driven economy, the demand for metals used in energy-dense, rechargeable batteries is increasing; these include cobalt and lithium. Although cobalt is mostly obtained as a by-product from nickel and copper mining, significant amounts also occur in volcanogenic massive sulfide (VMS) deposits, of which Canada has many. However, the primary controls on cobalt distribution in VMS deposits are poorly understood, and may be affected by deformation and metamorphism. We show that cobalt can occur in pyrite, which retains its primary composition through greenschist fa
Style APA, Harvard, Vancouver, ISO itp.
10

Bostock, H. H. A Preliminary Report On the Distribution of Tourmaline in the northern Taltson Magmatic Zone, Northwest Territories, and Its Implication For Base Metal and Tungsten Prospecting. Natural Resources Canada/ESS/Scientific and Technical Publishing Services, 1990. http://dx.doi.org/10.4095/131241.

Pełny tekst źródła
Style APA, Harvard, Vancouver, ISO itp.
Możesz być także zainteresowany rozszerzonymi bibliografiami na temat „Metal distribution” dla poszczególnych typów źródeł:
Artykuły w czasopismach Rozprawy doktorskie Książki
Oferujemy zniżki na wszystkie plany premium dla autorów, których prace zostały uwzględnione w tematycznych zestawieniach literatury. Skontaktuj się z nami, aby uzyskać unikalny kod promocyjny!

Do bibliografii